Action Construction Equipment Limited (ACE) Earnings Call Transcript & Summary
May 21, 2026
What were the key takeaways from Action Construction Equipment Limited's May 21, 2026 earnings call?
In Q4 FY '26, Action Construction Equipment Limited (ACE:IN) reported a total income of INR 1,021 crores, reflecting a 15% sequential increase and a 5.58% year-over-year growth. The company achieved an EBITDA of INR 163.7 crores, with an EBITDA margin of 16%. Despite geopolitical challenges, management indicated a positive outlook, stating, "the demand momentum returned in quarter 4 FY '26, reinforcing our confidence in the medium-term outlook for the sector." Guidance remains cautious, with management refraining from providing specific annual revenue targets until Q2 FY '27 due to market uncertainties.
What topics did Action Construction Equipment Limited cover?
- Revenue Performance: ACE reported a total income of INR 1,021 crores for Q4 FY '26, up 15% sequentially and 5.58% YoY. Management noted, "we delivered our best-ever revenue performance in quarter 4 last year with sustained operating margins."
- Margin Sustainability: The EBITDA margin for Q4 FY '26 was maintained at 16%, with management expressing confidence in sustaining margins despite inflationary pressures. They stated, "we will continue to dynamically manage our EBITDA margin broadening the existing range."
- Joint Venture with Tata Works: ACE announced a 50-50 joint venture with Tata Works, aimed at enhancing manufacturing capabilities and expanding into the heavy crane segment. Management anticipates revenue contributions of approximately INR 300 crores from this JV over the next few years.
- Geopolitical Challenges: Management acknowledged the impact of geopolitical tensions on raw material costs and supply chain disruptions, stating, "the escalation of West Asia prices led to raw material supply disruptions, inflationary pressures, continued rupee depreciation impacting the overall cost environment."
- Future Guidance: Management refrained from providing specific revenue guidance for FY '27, indicating that they would assess market conditions in Q2 FY '27 before offering projections. They emphasized, "we remain confident in the company's medium to long-term growth path."
What were Action Construction Equipment Limited's May 21, 2026 results?
- Total Income: INR 1,021 crores (up 15% sequentially and +5.58% YoY)
- EBITDA: INR 163.7 crores (16% margin maintained)
- Profit Before Tax (PBT): INR 151 crores (null)
- Profit After Tax (PAT): INR 108 crores (null)
- EBITDA Margin: 16% (maintained despite inflationary pressures)
- Defense Revenue Contribution: 5-6% (up from 3% last year)
ACE's Q4 FY '26 results reflect resilience amid challenging market conditions, with strong revenue growth and maintained margins. The joint venture with Tata Works and a focus on defense contracts present potential growth catalysts. However, geopolitical uncertainties and inflation pose risks that investors should monitor closely.
Earnings Call Speaker Segments
Good day, everyone, and welcome to the Action Construction Equipment Q4 FY ’26 Earnings Conference Call. <<operator_script>> I'll now turn the conference over to Mr. Divyam Jain of 360 ONE Capital Market Private Limited. Thank you, and the floor is yours, sir.
Good afternoon, everyone. I'd like to welcome the management team and thank them for giving us this opportunity. Joining us on the call today are Mr. Sorab Agarwal, Executive Director; Mr. Rajan Luthra, the Chief Financial Officer; and Mr. Vyom Agarwal, our President. I'll now pass the call over to the management for their opening remarks. Over to you, sir.
All right. Good afternoon, everyone, and welcome to the earnings conference call covering the fourth quarter and the year that ended in March 2026. Joining me on today's earnings con call are our CFO, Mr. Rajan Luthra, and our President, Mr. Vyom Agarwal. I trust you've had a chance to review the Company's financial statements and the earnings presentation, both of which have been circulated and uploaded at the stock exchanges. Demand conditions stayed stable across the market during the quarter, with the exception of March, backed by a conducive macroeconomic environment and a series of fiscal and monetary measures rolled out through the year. Lower headline inflation for a significant part of the period also gave demand support in quarter four. Near the end of the period, the escalation of West Asia crisis caused a sharp rise in crude and crude linked commodity prices, supply side disruptions and continued rupee depreciation. Even with these geopolitical headwinds, we responded with agility and operational discipline to deliver our best ever revenue performance in quarter four last year, with sustained operating margins to fortify our balance sheet. Let me walk you through some of the highlights of this fiscal. On a standalone basis, we have achieved a total income of INR3,395 crores in this fiscal, which is more or less flattish.
For the year, our EBITDA margin widened 81 basis points, reaching 18.33% versus 17.52% a year earlier. Profit before tax also rose 80 basis points, coming in at 16.68% compared with 15.88%, while PAT climbed 73 basis points to 12.53% from 11.8%. On an absolute basis, EBITDA was up roughly 4%, hitting INR622.36 crores versus INR599 crores in the prior year. Our PBT rose 4.3%, moving from INR543 crores in FY ’25 to INR566 crores in FY ’26. In the same way, PAT went up from INR404 crores to INR425 crores, which works out to 5.4% growth over the last financial year. The quarter opened strongly, helped by healthy market sentiment. In March, though, the West Asia crisis escalated, which disrupted raw material supply, added inflationary pressure, and with the rupee continuing to depreciate, weighed on the overall cost environment. So, briefly on the fourth quarter FY ’26 financial performance on a standalone basis: total income for the quarter came to INR1,021 crores, up 15% sequentially and roughly 5.58% higher year-on-year. EBITDA for the quarter was INR163.7 crores — EBITDA for the quarter stood at INR163.7 crores — while PBT and PAT came in at INR151 crores and INR108 crores, respectively.
We managed to maintain an expanded margin profile, and EBITDA margin came in at 16%. PBT margin was 14.8%, while PAT margin was 10.65%. Operating margin for the quarter widened 145 basis points on a sequential basis. That said, other income was muted this quarter because of volatility stemming from the geopolitical environment. We remain debt-free, with ample liquidity available for the future. The Board of Directors has recommended a final dividend of 100%, which works out to INR2 per share for the year ended 31st March 2026. Our cranes, metal handling and construction equipment business posted income of over INR2,946 crores last year. Within this segment, FY ’26 — in this segment, FY ’26 was a year of normalization for the industry, coming after an exceptionally strong FY ’25, which also gained from significant prebuying ahead of the emission norm transition. Industry demand in the first half of the year was hit by the emission norm transition, geopolitical situations, an extended monsoon and slower project mobilization, which led to further moderation in demand. Encouragingly, the industry continued — industry conditions improved progressively through the year, and demand momentum came back in quarter four FY ’26, reinforcing our confidence in the medium-term outlook for the sector.
Within this division, we managed to hold our expanded margin profile at 18.6% and posted a profit of INR548 crores. The agri division posted 9% growth — sorry — and brought in revenue of roughly INR251 crores, with margins at 1%. Also, we're happy to announce that a 50:50 joint venture has been finalized between Action Construction Equipment Limited and Kato Works Company, Japan, combining ACE's robust manufacturing and distribution strengths with Kato's globally acknowledged leadership in heavy crane technology. This JV will act as a dedicated platform for the truck cranes, crawler cranes and rough terrain crane businesses, reinforcing our position in the heavy crane segment. Through this partnership, ACE is positioned to speed up technology upgradation, deepen localization, broaden export opportunities and take meaningful part in India's expanding infrastructure and industrial capex cycle. Our strategic positioning across the core sectors of infrastructure, construction, manufacturing, logistics and agri will give the necessary impetus to our growth ambitions. Over the past year, we successfully completed our capital expenditure as planned, expanding our capacities. We've also strengthened our operational capabilities via modernization and automation initiatives designed to bolster our quality and capabilities while enhancing market competitiveness. Our blended capacity utilization for cranes, metal handling and construction equipment is at approximately 60%, which leaves us with sufficient headroom to capitalize on any near-term demand uptick in the future.
Looking at the macro picture, India's economy is still showing resilience even with all the global uncertainty going on. We stay optimistic about where the construction equipment industry is headed over the long term, and that's backed by the government's continued focus on building infrastructure, better project execution, and growing investments in urban infrastructure and industrial sectors. That said, we're keeping an eye on the shifting geopolitical situation, since it could cause temporary supply chain disruptions as well as demand side hyperinflation and volatility in input costs. With that as the backdrop, we anticipate a steady start to the year and are staying focused on delivering against our growth agenda. Steel — our largest input material — is still volatile and at elevated levels. We'll keep pursuing every lever available, such as savings and judicious, calibrated pricing actions, while preserving the right growth equation so we can protect and sustain our business model. Our focus continues to be on driving volume-led competitive growth with the right balance on pricing. We will keep managing our EBITDA margins dynamically, broadly within the existing range. We're continuing to monitor the inflationary environment closely, and our focus is on ensuring we sustain our margin profile through the course of the year. We remain confident in the Company's medium to long-term growth path. Our strategic priorities are unchanged: driving operational excellence, improving cost efficiency, maintaining disciplined capital allocation, and investing in capabilities that enhance competitiveness and profitability.
Given our robust position in the market, a sharply defined approach, and ongoing discipline in how we execute, we feel confident about generating durable value over the long term for everyone with a stake in the business. So with that, I'd like to turn things over now to the question-and-answer portion. Thanks.
Thanks. We’re going to start the question-and-answer portion now. <<operator_script>> Our first question comes from Mudit Bhandari at IIFL Capital. Go ahead, please.
Hello, sir, and thanks for asking. About our truck cranes and crawler cranes — the ones we were discussing in terms of LD implementation and possibly tapping that market — where do things stand now? And second, looking at the other cranes, such as pick and carry and the rest of the products, how are the Chinese players positioned there — has there been any shift in price points, or in the capabilities of those Chinese players, that is holding them back from entering, say, pick and carry or any of the other crane segments?
Look, obviously, your question has two or three parts to it. The first part is pick and carry cranes — the Chinese really aren't making pick and carry cranes. So in the pick and carry crane range, which is generally under 30 tons, 35 tons capacity and is a pick and carry crane, we don't really face any competition. What the Chinese are good at is the slew cranes or the heavy cranes, which are, I'd say, 40 tons, 50 tons and bigger. There are different types of cranes. They are 360 degrees slew and with outriggers. And that's where we had applied to DGTR regarding the disabilities and the problems the Indian industry is facing on the price front or the credit terms front, whatever these Chinese people are offering. And obviously, the entire proceedings happened, everything happened. And last year in September, there was a DGTR order for antidumping duties. But very unfortunately, for some good, bad reason, it has not been notified by the Ministry of Finance. And that is the situation as on date. And generally, it's a 90-day time bar. So ideally within December, it should have been notified. So even we really don't know what is going to be the future fate of that antidumping order, wherein 25% to 52% duties were put on Chinese manufacturers.
Sadly, though, the Finance Ministry has yet to put that order into effect.
Okay sir, and on the point that Chinese customers aren't into pick and carry cranes — is there a specific reason for that? Like, is there some capability they lack, or are they unable to meet our price point that we can supply at, or any other reason?
So really, it comes down to how you're accustomed to operating in your own country or territory. In China, right from the start—even with smaller cranes, under, say, 40 tons, or let's say 10 tons, 20 tons, 30 tons—people there have always been familiar with the idea of truck-mounted slew cranes. That's still what they use today, and it's what they've perfected over the years—over the last 20 years, 30 years, 35 years. As a result, they don't produce any pick and carry cranes at all. Yet pick and carry cranes are highly popular and form the backbone of construction, lifting, and shifting work, even in industrial zones in our country. That's why India pick and carry cranes are so popular. The same holds true in Australia—pick and carry cranes are very popular there. Even in Italy, pick and carry cranes are very popular. So it depends on the country. In China, people are accustomed to slew cranes or truck cranes—360-degrees slew cranes. That's the primary reason they aren't in the habit of using pick and carry cranes, and it's why they don't manufacture pick and carry cranes.
Got it, sir. Second, on geopolitical conditions and similar factors — is there a particular parameter involving crane types that the industry monitors, say fuel price efficiency, to determine which product gets used or sees more demand going forward? So does a parameter like that exist, or do any of our customers or market players rely on this sort of thing in a way that shapes their decisions?
Not really. You see, the key factor when it comes to deploying cranes and construction equipment is capacity and capability. For cranes, that's measured in tonnage. As for other machine types, it has more to do with how much aggregate material we're moving. So when deciding which crane to use or not to use, fuel consumption really isn't the criterion. It all hinges on the load that has to be handled.
Got it, sir. Just a question about the books. What percentage of our cranes, for whichever customer is purchasing, get financed, and then roughly how much would be their own financing — Foreign Speech — not going through a financial institution?
My guess is that roughly 85% to 90% — pretty close to that — of both the cranes and the construction equipment tends to get financed through NBFCs and banks.
Understood, sir. And would all of that be the rental players, or the EPC customers?
No, everyone. Look, the whole market breaks down into rental and contractors. So the majority of them would rather have it financed through NBFCs or the banks.
And when it comes to our revenue share, roughly what percentage — or any approximate broad range — would come from rental customers versus developer or EPC players?
My answer would be that the split is roughly 50/50. So approximately half, perhaps slightly more than half, get purchased by rental companies, and the remainder goes straight to end users — those being EPC players plus the manufacturing and logistics sector itself, since they too rely heavily on pick and carry cranes for lifting and shifting needs: engineering, manufacturing, logistics.
Got it. Got it. Thanks. I have additional questions. I’ll think of the follow-up.
Yes, thanks.
Thanks. Our next question comes from Nidhi Shah at ICICI Securities. Go ahead, please. Mr. Nidhi Shah, please go ahead. Mr. Nidhi, would you mind unmuting your line? As we aren't getting any response from Mr. Nidhi, the following question comes from Akash Mittalwala <<inaudible>> at Nine Rivers Capital. Please go ahead.
Hello. Can you hear me okay?
Yes, absolutely — go right ahead.
Hello, and congratulations on the guidance figures. My first question concerns segment revenue: I notice a line item labeled "others" that did not appear in earlier quarters of this year, amounting to approximately INR76.55 crores. Could you explain what that other segment revenue consists of?
I believe Mr. Luthra will handle that question. But unless I'm mistaken, that involves certain miscellaneous exports and items we sell out of India. So it's being captured there since it has grown significant. That's why I think we listed it as a separate line item. Mr. Luthra, please?
You're correct that it's minor — a bit of it goes to miscellaneous. So the auditors report that on its own as a separate line.
Got it. For my second question, on the financial report, could you give some clarity regarding the line item for impairment losses on financial assets — what makes up that breakdown, and where is it coming from?
So look, essentially this is — under a prudent accounting policy, we make provisions for expected credit losses based on the receivables. So as a prudent accounting policy, really, this isn't an actual loss, but we're required to provide for it, keeping in mind any expectation or any risk that may come up going forward. These are just provisions for payments that are a bit delayed.
Understood. That covers both of my questions. I'll rejoin the queue. Thanks.
Thanks. Our next question comes from Neel Shah, who is calling on the line of Purnartha Investment Adviser. Go right ahead.
Hello?
Yes, go ahead.
Yeah. Could you break down what's actually in that negative other income? I just can't work out why other income would come out negative.
My sense is that this relates more to mark-to-market losses on the investments we've made, along with the additional liquidity and the cash we hold. I believe Mr. Luthra will explain.
Yes, you're correct. In fact, we hold investments because we have surplus cash that has been invested. So, as a prudent accounting policy, we carry out mark-to-market provisioning at the close of each month. So there is a mark-to-market. And as you know, the market was somewhat negative in March — in the last quarter itself — which led to a mark-to-market provisional loss, not an actuarial loss, and part of that has been recovered in April, since the market has moved somewhat upward compared with March.
So what you're saying is that now that the loss has been reversed, we should expect higher other income in Q1?
Honestly, a lot hinges on how the market moves. Should conditions turn favorable, then for sure it will bounce back. Still, April was a bit stronger than March, no question. We've clawed back part of those mark-to-mark provisioning losses during April. My hope is that if the market holds steady or improves slightly, we ought to see a solid figure for this quarter.
We'd most likely be hoping it comes back to somewhere in the range of INR20 crores to INR35 crores, right, Luthra?
You’re correct, sir.
My sense is that it will be back on track before this quarter is over.
All right, and I have one more question. Since you've disclosed the other segment within segment revenue, could you also tell me the volume tied to that other segment — that is, the volume you exported, the miscellaneous export? That would be really helpful to me.
As far as I'm aware — and Luthra, sir, can correct me on this — breaking that out by volume would be really tough, since there were various items we exported out of the country. So I don't believe there's really a volume figure attached to it. It's more a matter of value.
Yeah.
Alright. Could you say that again — you mentioned cranes being exported?
A portion of that involved construction equipment, though I'd say broadly it was miscellaneous items alongside that. There were also some orders intended for division two.
Alright, alright, fair enough. Thanks.
Thanks. <<operator_script>> Our following question comes from Rochan Charan at Global Consilient Research. You have the floor.
Sir, can you hear me?
Yes, sir.
Sir, my question was about whether any shipbuilding clients are already part of your customer base, sir? I'm raising this because there has been news about new clusters emerging, right? So I simply wanted to get a sense of whether you see any opportunity in that customer segment.
Yes. We deliver to pretty much every shipbuilding yard, whether it's in Goa or elsewhere across the country. And as I recall, not long ago we supplied 3 special tower cranes — even to Garden Reach Shipbuilding — big tower cranes that can be used during ship construction as well as for placing material onto the ship once it's finished, other aggregate material that has to be loaded on. So we work with all the shipbuilding yards, and they need tower cranes, they need pick and carry cranes, they need everything.
Okay, sir, so with the expansion that's happening right now, how much of your revenue do you expect these clients to contribute in the years ahead, sir?
It's really hard to attach a figure to that, but consider that of the roughly 700 tower cranes we sell, perhaps 10, 15, or 20 of the larger units in a given year go to them. So you could simply assign a number—likely near 1% or even below that. Much the same, I'd expect, applies to pick and carry cranes as well.
Alright, sir. Thanks so much. That’s all from me.
Our market is extremely, extremely diversified. Anywhere across the country that material needs to be lifted or shifted — be it infrastructure, be it construction, be it an industrial facility, an engineering facility or, shall we say, a shipbuilding facility, which I would describe as an engineering facility, a large engineering facility. So anywhere there's a requirement to lift and shift loads, cranes of various types are needed. So — and in practice, we deal with pretty much every player in the country that has a lifting and shifting requirement.
Got it, sir — thanks so much.
Thanks. We'll take our next question from Aditya at Old Bridge Mutual Fund. Go right ahead.
Hello, and thanks for the chance to speak, sir—congratulations on a solid set of results. Sir, my first question concerns tower cranes. You mentioned that we achieved 700 units this year. Given the construction activity we have, what expectations should we hold for FY ’27 regarding volume for tower cranes?
I believe the number of tower cranes we did during the current year came in a bit under 700 cranes. I think it was near 680 cranes, 690 cranes, roughly that. And I think clearly, the real estate market has performed well over the recent past, and that's a trend we're observing. When it comes to tower cranes, our order books are completely full. Yes, it slows down somewhat during the monsoon season, but that occurs each year. However, it hasn't happened so far. It only begins to happen around the middle to end of June. So hopefully, we should be seeing growth once again in the tower crane segment. Putting a number to it would be very difficult at this point, because our capacity right now is close to about 950 cranes, 1,000 cranes. And we would definitely love to be able to utilize it going forward. Overall, the sentiment, the economic scenario, how it will play out given the geopolitical uncertainty that's hanging around and the imbalance in trade deficit, rupee depreciation — I don't know how the scenario plays out going forward, how positive it stays or how neutral, or whether it goes the other way.
So, look — we're fairly confident that we ought to be posting bigger figures than we managed last year.
Alright, alright, absolutely. And…
Apologies, apologies — let me just walk you through what's going on right now. As you can see, we're basically at the tail end of May, I'd say. So roughly one and a half months, two months have already passed. So I mean, the demand for tower cranes at this point is, from what I observe, running at full throttle. And that applies when I look at our other products too. So we're expecting decent growth within quarter one itself, but that's just quarter one. Things actually began picking up at the end of quarter three last year. So looking ahead, it depends on how the economic picture unfolds and where sentiment goes, because ultimately every machine we build is a capital good. So we get hit first and recover last, to be very frank with you. That's the pattern I've traditionally observed. So as of now, things look good. But as for what happens in Q2 and Q3, I think somewhere around the middle to end of Q2 is the precise point when we should be in a position to guide, including on an annual guidance. And that's also why we've held back from providing an annual guidance until now. We're expecting a good quarter, that much I can tell you. Yes, there will be an increase driven by inflation with respect to our selling prices, and that will add to revenue — that will happen.
Defense will bring in some extra revenue as well, since we have roughly INR575 crore of orders still pending in that segment. That is going to come through. Exports should rise too. Still, attaching a figure to it right now would not be wise. That is the reason we prefer to hold off until the middle of quarter two before we put a number on it.
Right, so that was actually what I was going to ask next, in relation to defense. You’ve got INR575 crores of orders left to execute, correct? But there, I think we have better visibility on execution when it comes to deliveries. So what sort of expectation should we have for that piece?
Looking at last year, defense business contributed close to around 3% of our overall revenue share. And this year, we believe that figure will rise to somewhere between 5% and 6%, perhaps a bit more, but yes, 5% to 6%. So that ought to be upwards of INR200 crores, INR200 crores, INR220 crores, whatever it lands at within this year. If we get the opportunity to execute beyond that, we will certainly try to do so.
Right. So, on the question of whether we expect any kind of price increase or price hikes in the quarters ahead, given the cost inflation that we're seeing?
101%. We have already raised our prices. Speaking of the calendar year, in January we implemented a general inflation-related price rise of 1%, 1.5%. Then on 1st of May, we raised prices once more by close to roughly 4%, perhaps a bit higher. And starting 1st of June, we are pushing through yet another price increase of 5%. That takes the cumulative figure to 9% to 10%. Still, considering the total cost escalation, it could fall anywhere in the 11% to 14% range — 11% to 14%. We don't yet know where things will settle over the coming one, two, or three months, since steel — our largest cost component — has gone up by 20%, 22% since 1st Jan. That represents approximately 65% of our costs. So, to illustrate, 20% of 65% equals 12%. Ultimately, we will need to reach a price increase of at least 12%. It might end up somewhat above that.
All right, all right, all right, all right, thanks — I’m done.
Right.
Thanks. Our following question comes from Vedanta Bhadani with Canara Bank, whose line is now open.
Hello, sir, good evening. Can you hear me okay?
Yeah, yeah.
Actually, sir, I have two questions. The first one concerns the noncurrent investment we're making — an outflow of INR831 crores in cash. Could you shed some light on that? Why are we putting so much into investments on it? I've already noticed investments in some unlisted shares and debentures. So could you give us some clarity on that?
At its core, it's the additional surplus cash we're capable of producing. So we're deploying that money through investments rather than letting it sit idle. And I believe Mr. Luthra can shed more light on this. Luthra?
The way noncurrent is defined for the audit is that anything maturing beyond one year counts as noncurrent. As was correctly mentioned, we've been putting surplus into certain bonds and similar instruments whose maturities fall past one year, though the bulk of my investment carries a tenure of just between one year to two years — two years to three years only. That's why it has simply been classified as noncurrent. These are, in essence, also classified as noncurrent. Yet since most of them are secured and listed and bonds, etc., the reality is that they can be sold in the market and turned into cash at very short notice should the Company need it for any other purpose.
And roughly how much would that noncurrent investment come to, Luthra, sir?
On the noncurrent side, sir, it'll land at roughly — so essentially, noncurrent follows the accounting definition of noncurrent. In truth, in a practical, real-world sense it might not actually be noncurrent, but…
I get that they're liquid and can be traded in the market. But just to get an idea.
Sir, if you could bear with me for a moment, sir.
That was the next question from the gentlemen.
All right, sir. The following question concerns the…
Roughly INR700 crores.
Got it. The next question concerns the antidumping duty. At present, every one of our competitors — earlier it was mentioned that they bring high tonnage crane kits into India and then sell them there. But now, gradually and steadily, they are shifting toward a full-fledged manufacturing facility. So with all of that taking place, after this, in what way will this antidumping duty benefit us? Because if they are now going to manufacture cranes — high tonnage cranes right in India — then how will this, if it applies, how will it be of help to us?
Unfortunately, antidumping duties still haven’t been put in place. Ideally, they would have gone into effect by December. So honestly, I don’t know how this will turn out. Right now, it looks like the 90-day bar means it has become time-barred. But there are government regulations and rules, and in the past this has been done even after that point. So I genuinely don’t know whether they will be imposed or not. That said, one or two of the manufacturers among the three main manufacturers or importers into India, a Chinese company, they’ve begun to — out of fear that antidumping duties may come, they’ve begun at least to assemble these machines in India, some of the models, and also to try to indigenize some of the components, which definitely leads to a cost increase for them, which I understand very clearly because luckily, I had a discussion with one of them three months, four months back. So their costs are going to rise by 8% to 10%, which will make us more competitive, but the costs are going up because of trying to do local manufacturing, because earlier what they were doing was practically dumping of complete machines from China and at subsidized prices, whether done by the company itself or eventually subsidized by the government, which is a mystery to everybody who works with China.
And yeah, but this is — eventually this is going to work to our advantage, because their costs are rising 8% to 10%. That's my understanding.
Got it, sir. Thanks very much. I’ll return to the queue.
Thanks. Our next question comes from Nidhi Shah at ICICI Securities. The line is yours — go ahead.
Okay. Can you hear me now?
Yes, ma’am — we can hear you clearly.
Yes, and sorry about before. Thanks a lot for taking my question. What I'd like to ask is this: given the price hikes we've already put through and the ones still to come, do you think the market in the cranes segment has enough appetite that we might see crane volumes grow by at least 10% in FY ’27? Or does that look out of reach?
Honestly speaking, I wouldn't want to attach a figure to that right now. And as I said, the first quarter has been solid. Yes, partly since the comparable base in Q1 of last year was somewhat lower. So given that low base effect, we'll perform fairly well — okay — in quarter one. Perhaps we could even see growth of 15%, 20%, or possibly a bit more, I'm not sure, within Q1. But looking ahead, how things unfold is a bit hard to answer at this point. That said, I'd simply note that last year, when the new emission norms — BS5, CV5 — came in, there are mainly two kinds of cranes. One is the hydra type, the old generation, and the new generation crane. The old generation crane is mainly purchased by retail hirers and used across many industrial areas. And they were quite skeptical, because those cranes are going from Tier 3 directly to the Tier 5 standard. For the first time, they were turning electronic. So they feared the technology — how would they be able to manage it.
And the price hike in that case was the highest, ranging from 12% to 15%. So that segment of the market — roughly 60% of cranes, the old generation ones — that segment contracted over the last year due to skepticism or fear or whatever term you'd use, and it got back on track in January and February. So if that holds going forward, then we should certainly be able to see an increase in crane numbers. But — given the current overall scenario and, let's say, how the economy will play out down the road, it's hard to attach a number to it. That said, as a company, I think we should be able to grow, because inflation gives us a 5%, 7%, 8% leverage on our revenue, an additional 2%, 3% from defense business provides some leverage, plus certain other levers. So we are certainly anticipating growth this year. But pinning a number to it — whether in terms of units or, let's say, in terms of turnover or percentage — we would prefer to do that only in the second half of quarter two.
Thanks. My next question concerns margins. Over the past three quarters, EBITDA margin excluding other income has mostly come in around 16%. Considering the price hike you've implemented alongside the rise in material costs, do you think those margins will broadly hold? Or might we see something like a 50 bps to 60 bps decline in margin?
Look, we're hopeful that we'll be able to keep our margin profile going, with EBITDA excluding other income somewhere around 15% to 16%. That's our main target and aim, given what's happened over the last two months, three months when it comes to commodity pricing and inflation. And we'll be watching this very closely with respect to our costs wherever they're rising. So we'll take calibrated price actions wherever needed to offset that. We're hopeful that we'll be able to hold our margins.
Thanks. And finally, regarding the price increase — are the other competitors in this segment also taking that kind of proactive pricing approach, where they're regularly updating prices? What I'm really trying to get at with my question is: after all these price hikes, is there now a significant price gap between you and the competitors? Or is the market for the crane segment largely running at similar prices across the board?
Look, prices have been going up. That’s the understanding I’ve gotten from our sales department — that our competitors have raised their prices lately as well. And since costs — input costs, whether it’s steel, rubber, plastic, copper, oils, paints, or whatever commodity you can think of that goes into an automotive-type product or an engineering product — have gone up across the board for everyone. So at the segment level, our competition, I think, sits at 8%, 9% margin, while we’re near 18%, 19% margin. So I don’t see any reason that if input costs rise by 12%, 13%, 14% and their company margin is at 8%, 9%, why they wouldn’t raise prices, unless they want to get into a 5%, 6% negative kind of situation. Up to now, they have raised their costs. That’s what our knowledge is. And going forward, whether they raise or not is their prerogative, but we will definitely be raising another 5% from 1st of June. And perhaps we’ll need to follow that up with another 3%, 4% at some point later in quarter two.
Okay, thanks a lot for taking my questions.
Yeah, thanks for that.
Thanks. Our following question comes from Richa at Equitymaster. You have the floor.
Thanks very much for taking my question. It concerns the joint venture with Kato. Could you shed some light on the sort of opportunity we might see over the next two to three years — what revenue and margins are we aiming for with this?
I'd like to lay this out in two scenarios. Right now, with the antidumping duties not yet in place — so under the current scenario — I think over the next three years to four years, we should be looking at revenue from this joint venture of upwards of INR300 crores. It might be a bit more, it might be a bit less. But yes, that's with antidumping duties, and even in yesterday's newspaper, the main headlines in The Economic Times were that we should immediately curb nonessential imports. These machines are nonessential imports, because if they can be made in India, why should India be importing them? So if the government wakes up and the Finance Ministry puts antidumping duties in place — in that scenario, we could have looked at even upwards of INR700 crores, INR800 crores. But yes, as things stand, I would say it is close to INR300 crores.
And sir, at the moment, how much of a pricing gap would there be between the version made in India and the imported one?
Look, when it comes to pricing versus what the Chinese are paying, it's a bit hard to pin down. But yes, they can't be cheaper than what we're doing in India. Still, if you're talking about gross margin or selling prices, what I'd say is this: the price the Chinese are selling at would need to be at least 25%, 30% higher for them to make any money, because they face an extra barrier of 7.5% in current custom duty. On top of that, there's the freight cost coming in from China. And now even our currency has depreciated by more than 10%. So even in this scenario, they continue — I think they're under selling by at least 25% to 30%, if not more. And on top of that, they also offer a one year, two year credit period, which again works out to a 7%, 8% benefit per year for the customer.
Okay, so my next question is about capex. With all that’s going on in the macroeconomic environment — even though Q1 is performing well — you’re still not providing guidance. So what is the capex plan? What are the investment plans? And has anything changed relative to last year?
For the current year, I believe our spending will come to roughly around INR130 crores to INR135 crores in order to finish acquiring a land parcel — we contracted for that roughly one year, one and a half years ago. That will be for land meant for future expansion. Beyond that, we're building a new plant inside our existing complex, particularly for the defense machines and defense equipment, and also for certain new products that we expect to introduce within the next one year or two years. That would come to somewhere around INR40 crores to INR50 crores. Then, let's say, maintenance capex of INR20 crores to INR25 crores on top of it. So including land, I think our total capex for this year, all of it put together, should be close to INR200 crores. We also plan to build a new tower crane factory, for which we envisage capex of upwards of INR400 crores. So at present, we have capacity. So we'll simply wait and watch, and wait for the momentum. And the moment we see things moving, then perhaps within this year, we'll begin work on that. But that, again, is need-based.
Okay, and sir, if we decided today to build that tower crane factory, about how long would it take?
Regarding the tower crane factory, I'd estimate we need a minimum of 12 months to 18 months — probably closer to 18 months, since it's going to be highly autonomous and robotic.
All right, thank you. I’ll circle back.
Thanks. We’ll take the next question from Akash Mittalwala at Nine Rivers Capital. The line is yours — please go ahead.
Thanks for letting me ask. Could you clarify anything about that defense NOC mentioned earlier, and have they responded yet?
Yes, we've secured the necessary approvals from them. And assuming all goes smoothly with that large rough terrain forklift order — actually, it's a telehandler — then we should begin execution in the following quarter.
Great, great. My second question is about last quarter — all of you said you had worked something out regarding the JCB Backhoe segment and that we should expect something in the future. So have we followed up on that? Or is there any clarity on it?
Yeah, it's still a work in progress. We've seen a bit of success. I think we should have the proof-of-concept for that in June or July. And hopefully that'll help us boost our numbers reasonably within this year itself. And then going forward, it should be much better. So I think we're on track with that, yes.
Fantastic. Fantastic. I appreciate your responses, and best of luck.
Yeah, thanks for that.
Thanks. Our next question comes from Ganesh Gupt <<inaudible>> at SS Family Office. Your line is open.
Yes, sir. Hello. My question concerns the guidance you gave in Q2 FY ’26 for FY ’29 or FY ’30 of roughly INR6,000 crores to INR6,200 crores. But with the industry environment fairly muted at present, how do you see that roadmap having developed compared with the original plan, or are there any updates you would like to make now? And specifically, which business segment would you now expect to drive the bulk of the incremental revenue?
That INR6,000 crores to INR6,200 crores by FY ’29, and in the worst case by FY ’30 — if I’m not mistaken, that ought to have been the guidance we gave. And clearly, to get there, we need to add no less than roughly INR800,000 <<inaudible>> crores of revenue across the coming three years, or perhaps at a pace of INR700 crores, INR800 crores over the next four years. Yes, attaching a specific figure to guidance this year will be tough as things stand right now, but with luck we should manage it in quarter two. I think, taking a somewhat medium-to-long-term view, we should remain on course to reach that INR6,000 crores plus in FY ’29 or, at the latest, by FY ’30, since there are some other items on the annual side that will likewise help us get there. Beyond that — yes, during the last year there was in fact a decline in the count of cranes and construction equipment. So those will come back as well. And regardless, both the product mix and the price mix on higher models have gone up. Some inflation will help us too, along with our growing defense and export business, because combined last year we did close to 9% for the first time, and our target stands at 10% to 15%, leaning more toward 15%, with export and defense taken together.
And so, during this year itself, hopefully we should be getting close to roughly 5% to 6% of revenue coming from defense, and around 6%, 7% from export. That will bring us to somewhere between 11% to 13%. Also, with regard to our — inside the cranes and construction equipment segment, even when we look at our construction equipment piece, we anticipate decent growth in this year, given all the endeavors and the things that have taken place, together with exports, together with defense, together with some other initiatives that we have already begun. So I believe we are on track. Perhaps a year here or there is the most that we are looking at.
And sir, one more question on that. With this guidance, what does the potential for operating leverage look like?
Look, I'll be completely candid and direct — and I believe I addressed a comparable question on the previous call or the one before it. Our EBITDA sits at 15%, 16% when other income is excluded, and roughly 17%, 18% once other income is included. So these margins, in my view, are quite healthy, and pushing them any higher than this would in the end hurt our market shares. So at these margin percentages, I'd say we're reasonably content. And beyond this, we'll aim to be more competitive.
All right, sir, I’ll leave it there. Thanks very much, and best wishes going forward.
Yes, a lot is required given where things stand right now. Thanks.
Thanks. Our next question comes from Jenil Barad <<inaudible>> at Prudent Corporate Advisory. You have the floor.
Hello? So my question was about other expenses. Even though our volumes this year have fallen by somewhere in the 18% to 20% range, our other expense has stayed roughly flat or has come down by close to 2%, 3%. So could you shed some light on why it hasn't dropped materially?
Moving on to other expenses. Luthra sir, could you take that question? Mr. Luthra?
Right, right. Essentially, when you examine those other expenses, the majority aren’t variable—they’re fixed in nature. As a result, there’s no direct core connection to revenue. That’s the primary reason behind it.
Alright, my second question concerns how our realization per unit dropped sharply during Q4 relative to the level seen across nine months. So in what way has the product mix shifted? And how do you — and what demand do you expect for each segment, cranes, construction equipment and material handling, in the coming year, and how did it fare in FY ’26?
Look, the real question here is what demand looks like in FY ’26 and the following year, along with price realization per machine. What’s happening is that, definitely within the crane segment especially, the market is shifting more toward higher-tonnage machines — whether that’s hydra-type cranes or new-generation cranes. So that’s why you’re seeing an increase in realization per piece there. Beyond that, obviously, cost increases are also taking place because of the emission transition we carried out last year. That, I think, added 5%, 7% to cost per unit on an average blended basis as well. In FY ’26, demand was very tepid owing to the emission norm change, particularly in quarter one and quarter two. Things began to improve in the second half of quarter three, and quarter four was good. In fact, during quarter four, we could have booked at least INR40 crores, INR50 crores more in revenue. Unfortunately, though, because of the war that started in the Middle East, some of our export shipments are still sitting with us and haven’t moved, since they were destined for the Middle East. And obviously, there was some moderation in deliveries happening within the country in March — some people become skeptical.
So that is essentially the situation. Looking ahead, during this year, we believe we should certainly see strong growth, particularly when it comes to backhoe loaders and construction equipment. In material handling — which is primarily forklifts and machines of that kind — once again, we ought to see a sensible rise in volumes. And in cranes, since the hydra variety had lost some of its appeal last year, as people were doubtful owing to the significant technical shift brought about by the electronic engine — well, that too has recovered over the last 2 months, 3 months. So with luck, I think we should once more witness a gain in the count of hydra cranes in the crane segment. Beyond that, our market share in new generation cranes should rise thanks to special features, safety features, and world-class advanced features — or rather, features that are IoT enabled and AI-enabled, which we have begun offering in our cranes together with our ACE Live app. So taking all of this together, I think we should be seeing a rise in volumes in the crane segment as well. However, as I said earlier on the call, the yearly guidance is something we would prefer to provide only around the middle of quarter two.
Alright, that's all from me, sir.
I appreciate that.
Thanks. Our next question comes from Tushar Raghatate at Omega Portfolio Advisors. Go right ahead.
Yeah, thanks for the chance to ask. I just wanted to check the guidance you provided — that INR6,000 crores to INR7,000 crores figure for FY ’29 or FY ’30 — does that include the JV revenue?
Yeah, obviously that’s going to play a part in it as well.
All right, so if it ends up exceeding INR300 crores, that would count as a bonus, correct?
Yes, that would be a bonus. And yes, there’s a chance it could exceed INR300 crores.
All right, that's fair. Sir, I can see that the average realization per company, per vehicle, has gotten to INR25 lakhs to INR28 lakhs, and gross profit is around INR8 lakhs to INR10 lakhs — INR8 lakhs to INR9 lakhs. After this high, large-size crane comes in, and you said the average ticket size is in crores — do you expect the gross profit margin to go up going forward once the antidumping matter is cleared?
Look, if that antidumping matter gets resolved, margins will definitely improve, since right now we're operating on practically nil margins. But even if the antidumping doesn't get cleared, I think going forward we would try to get the margins somewhere in line with our Company's current margin profile, especially for the machines that are going to be exported out of India. So the margin profile there will be much better.
Fair enough, sir. And sir, you said we'll do roughly INR200 crores this year and INR400 crores for the tower crane, so the capex comes to around INR600 crores, and with ROCE at 30%, 40% of the Company. Do you expect that we'll get the same from the capex you're undertaking?
Yeah, look, the INR200 crores is pretty much a sure thing for us this year. As for the INR400 crores, I honestly can't say whether that lands this year or the following one, since even if it does begin this year, perhaps INR1,500 crores would fall in this year, and then the remainder would fall in the next year.
Sir, my question looks ahead to the FY ’28-’29 perspective. Do you expect that you will keep up the ROC that you have — that you are working with at present?
Yes, yes, absolutely. That's also among the primary reasons we're going ahead with it. So that's why we're attempting to schedule it such that we don't put money in before the actual demand arises. So we'll be timing it to perfection. And in any case, our investment to turnover ratio is close to about eight times to 10 times. You can very well calculate that if we invest INR400 crores, so we are looking at at least eight times revenue from there or at least the capacity. So that we will totally take care of ROC and ROE before doing any capital expenditure.
The bright side is there won’t be any dilution, correct? That’s what I’m asking.
When you look at what's happened over the past two years, our ROC has dropped from roughly 40% to 32%. The reason is clearly that the cash has essentially been sitting idle with us and has been put into investments. That's exactly why we're working to deploy it productively so this ROC can climb back up again. And it isn't our aim or intention to let the ROC fall below 32%, 33%.
Understood, sir. And sir, regarding the defense side, is there any missile program where you're engaged with some high-value product on defense? Any color you could give on that, sir, would be helpful.
We've received a couple of orders for — this is known as QRSAM, the quick response surface to air missile. Right now, we're building protos for two separate integration companies on that same program, both of which have been assigned to work on it. So there are going to be huge requirements over the next two years, three years.
Tushar here — I'd like to add one point: firing systems aren't part of what we do. What we're…
My apologies for cutting in, Mr. Tushar sir. Would you mind getting in line if you have further questions?
No, let him complete this one.
Yeah, yeah. I just wanted to clear up that point in response to the question — we aren't involved in firing systems at all. What we handle is solely the material handling requirement for the armed forces, meaning the loading and unloading of ammunitions. So the firing mechanisms are not something we're involved in anywhere.
I believe we're ready for the following question.
Thanks. Our next question comes from Puneet <<inaudible>> at Jhaveri & Company. The line is yours.
Hello, sir, and thank you very much for the chance to ask. I believe you've already touched somewhat on the joint venture with Kato, but is this an entirely new product, a heavy cranes platform? Is this a space where you weren't present previously, and will you be bringing out these new products, as you mentioned, targeting at least INR250 crores to INR300 crores of revenue? And what does competition currently look like in India within the heavy crane segment?
Right now, we're in both truck cranes and crawler cranes, though only at limited tonnages. Through Kato, we'll also be building higher tonnages. The machines we already have will be upgraded using Japanese technology so they become world class. That's the reason they'll be sold in India and exported as well. Bigger train models will be developed and evolved inside the joint venture. Third, there will be certain dedicated export models, manufactured in India, that Kato will distribute around the world. That's where the main profitability will come from going forward — 2 years, 3 years down the line. Once we begin producing the models intended solely for the export market, which are 100% identical to Kato Japan production. That's one of the main aims as well. Competition today is still the same three, four Chinese companies, which over the last 10 years, 15 years have established a very strong foothold in the Indian market thanks to the advantages and price leverage they could offer customers, apart from extended credit terms of one year to two years, even three years in some cases.
That's basically who we're up against. Still, when you factor in the rupee falling, along with their own cost structures inside the country, and subsidies coming down, plus the fact that the Kato name carries a premium and we have pricing power since customers will pay 15%, 20% more for a Japanese product — going forward, I believe we can deal with the competition.
And sir, on the point that you’ll be shipping a large share of this product, as you also said, into global markets — is the issue that rivals are stronger on pricing? Could the Chinese also have an effect there? Or is it more about better market performance, which isn’t competitive when it comes to price and cutting price in that sense?
Look, globally this is a massive market — far, far larger than the India market. And when it comes to pricing, the Chinese in the various countries where they compete mainly head-to-head with European, Japanese, or American manufacturers are priced roughly 50% to 150% above Indian prices. So I think the competition will be very fair when Kato builds these cranes in India together with us and takes them there. They ought to be able to sell at prices similar to or above the Chinese, with decent profitability — all those calculations and everything, we've done them. And one more aspect of this JV I'd like to put forward: under one of the side agreements, ACE will also export a lot of material components and whatever Kato Japan needs, because they don't just make cranes — they also make other construction equipment such as excavators, etc. So they want to outsource these components and things, plus materials and commodities, from India, and ACE would be exporting that to Japan directly or exclusively. So that will also add to — that will be an additional revenue stream going forward.
Understood, sir. And just on the point you raised — you noted, of course, that guidance will be arriving in quarter two and afterward, so that's well taken. But speaking specifically about volumes for cranes, construction equipment, and material handling: last year the figure stood at roughly 13,300 <<inaudible>>, while this year it sits at 10,800 <<inaudible>>. So even with that decline, revenue has dropped only 1%, and you mentioned the hike. Therefore, whenever volume growth shows up, even if it lands in the high single digit, should we expect revenue growth to be far, far greater than what's currently anticipated?
You can do the math yourself, I'm sure. Yes, it's possible. That could happen. But we aren't counting on that, given how turbulent things are right now. So our top priority is keeping profitability steady. And in this situation, wherever we can, we're also again looking to grow our market share. On top of that, sure, if the market does expand — and it ought to, since last year's base was lower — that will give the momentum even more of a boost. Yes.
Understood. Many thanks, sir. I appreciate the chance, and all the best to you.
I appreciate that.
Thanks. Our following question comes from Rajat G <<inaudible>> at Fortune. The line is yours — go ahead.
Yes. Hi there, sir. Good afternoon. So basically, we’re market leaders with a market share of 60% odd in mobile cranes and tower cranes. Given the chaos that’s offering, would we be able to raise that by 5% or 10% this FY?
Look, what you've just raised is something we've been debating among ourselves. Still, with the way hyperinflation is right now and all of that, we're going to have to raise our prices and so on. Honestly, I can't really say how simple it will be to grow market share. In fact, it's going to be quite hard, since first of all we must hold on to our customers and ensure that we're able to — that we secure orders at improved pricing to offset the inflation impact. That said, yes, given the many good things and features we've incorporated into our cranes over the last six months, eight months, there ought to be some effect, and we should manage to grow our market share somewhat. But as things stand, it's very hard to put a number on it once more.
Sir, my expectation was that the smaller players have to be having a much harder time than we are. That's the reason I raised this question.
Yeah, every other player out there is smaller than we are. Our nearest rival is also smaller than us, though clearly it's a far larger company with solid figures. So everyone is having a hard time in this situation. Nobody has a clear picture of what's going on. Nobody really knows what the true inflation-plus-pricing amount should be, since inflation keeps moving as we go, and usually there's a lag of two months, three months, because certain inventories are still being processed, certain orders are still being processed. Our supplier orders are still being processed. So precisely how much is going to land, when. But yeah, the rough estimate, as I said before, is that 11% to 14% is the minimum raise we'll need to make to offset inflation. Now whether it ends up being 12% or 13%. And I'm sure the others are finding it tough, tougher, I'm sure.
Yes, sir, chaos is a ladder, sir, we will come out stronger.
Let's hope so. We've been up plenty of ladders before. I'm confident we'll get up this one too. Thank you.
Right, I’m finished on my side, sir. Yes, thanks very much. Best wishes.
Thanks.
Thanks. Our next question comes from Ganesh Gupt at SS Family Office. Go ahead, please.
Hi again, sir. Given the turbulent fiscal period we've just been through, would it really be fair to say that the worst is now behind us?
I wouldn’t say that. Last year, sure, the turbulence came from emission norms, from the India-Pakistan geopolitical situation with Operation Sindoor, from American tariffs, and from an extended monsoon. But this year, right now, we’ve come into it facing one of the most turbulent factors for our country, and that’s the price of crude oil. Now, opinions differ, and I hear different views from people too. Some say a $60 billion or $70 billion rise in the oil bill won’t hit a $3 trillion or $4 trillion economy all that much. It’s being overhyped, they argue. In the end, a depreciating rupee will ultimately make us more competitive in export markets. But when all is said and done, a war is going on, and a lot of crude oil headed to various countries that comes to India alone — LPG included — is blocked. So these are turbulent times, and honestly one can’t say how much more turbulent it will get. So, I mean, it’s anybody’s guess. Frankly, I’d have to become an astrologer to answer that. But yes, we do see some silver lining in this, thanks to our past endeavors — whether it’s the defense portfolio we’ve managed to build or some portion of the export portfolio we’ve managed to build.
Fortunately, the prior-year base came down largely due to those CEV-V emission norm machines being introduced, and some customers — a portion of them — had doubts. We certainly anticipate performing a bit better, considerably better, in the backhoe loader segment. Tower cranes remain steady, and the figures will rise. So it's anyone's guess. I mean, if there were some definite way to bring it about, we'll attempt everything feasible to achieve it.
Absolutely, sir. I genuinely appreciate you being upfront about that. Thanks so much.
Yes, thanks.
Thank you. Ladies and gentlemen, we’ll take this as the final question. At this point, I’m handing the conference back to management for their closing remarks.
Yes. As we've said, these are turbulent times, and a great deal of turbulence has occurred following this West Asia conflict. Inflation is on the rise. Our rupee is losing value. Business sentiment is being affected. Perhaps some consumer sentiment will be affected too. But I'm sure that as a company, we will find ways and means. And our top priority going forward is to maintain and sustain our margins, and then see how our numbers and our market share can increase further. And in saying all this, I can assure you that all our medium- to long-term building blocks with respect to growth, innovation, automation, improvement, strategy — whatever can be thought of — are in place, and all of us within our Company are working hard on it. So I'm hopeful we'll come out better from this crisis, which our country is facing and the whole world is facing. But our country is facing it a little more because we import more than 80% of our crude. But I'm sure things will be good going forward. Thank you.
Thanks to all of you.
Thanks.
<<operator_signoff>>
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Action Construction Equipment Limited transcript - plus 131,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Action Construction Equipment Limited earnings transcripts and 131,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.