Burckhardt Compression Holding AG (BCHN) Earnings Call Transcript
June 5, 2025
Earnings Call Speaker Segments
Good morning, everyone. Welcome to the presentation of our annual results. To begin, let's take a look at the picture in front of us. This is a service technician of ours in South Korea, installing a Hyper Compressor a few weeks ago. That compressor is going to produce spare parts and maintenance for roughly 50 years. And as of today, we have over 20 more Hyper Compressors of this kind in the Systems Division, whether they are in production or being installed. So this will truly boost our service revenues over the years ahead. That is what we refer to as our integrated business model. Today, Rolf and I will bring you up to date on our fiscal year '24 and the outlook for our fiscal year '25, naturally in the context of trade tariffs, and also against the backdrop of midterm megatrends that underpin our business. Assuming everyone has read the disclaimer on Page 2, I'll move on to Page 5. In summary, we achieved a record year 2024 in spite of the continued normalization of our market in the Systems Division and the weakening of the European and the Chinese economies. This shows how strong our model is, with a global footprint, a broad range of applications and a resilient service business.
Turning now to the various highlights. We shipped a record quantity of compressors. And because of that, our sales came in above — well above CHF 1 billion. For a long time, our star one day will be CHF 1 billion. We got to that CHF 1 billion — nearly CHF 1.1 billion. And we also hit, for the first time ever, net income above CHF 100 million, plus a record operating cash flow above CHF 200 million. With that, and with the strong balance sheet we have, the Board is in a position to propose raising the dividend by 16% to CHF 18. We also made clear progress on our mid-range plan, and we brought out new products and services. For example, as I mentioned in the first half year, we launched compressors for low-pressure LNG tankers, or a subsegment of that. And we also launched new digital services, which I'll present later on. We also took a big step forward toward our net-zero ambition 2035, with a very large cut in our greenhouse gas emissions. So overall, it was truly an eventful year, but also a successful one, and we had solid progress toward our mid-range plan. Now looking ahead, I mean, we have a strong backlog and we have, of course, challenges coming with the U.S.
Tariffs, yes, but also megatrends that underpin this business. Those I'll walk you through a bit later. So let me now turn to the financials in more detail. They demonstrate continued gains on the top line, on the bottom line, and in value creation — the sixth consecutive year of that. Before diving into specifics, though, one accounting policy change for the Systems Division deserves a mention. It became needed since we've had an increasing number of very large projects in that division over the recent years. As a result, beginning with fiscal year 2024, we apply a percentage of completion method to every project above CHF 7 million lasting longer than 1 — than 7 years — than 1 year, apologies. This way, the year's activity is reflected more faithfully, and revenue recognition should be more stable going forward. Fiscal year 2023 has been restated under PoC accounting, giving you a like-for-like comparison. Full details sit in our annual report, and Rolf will cover more on that later. With that in mind, let's look at the key financials. So despite a normalizing market, we posted our second highest order intake — above CHF 1.1 billion, up 2.4% versus the prior year, and above our sales level.
Our backlog keeps rising, driven mainly by marine applications and Hyper orders tied to solar panels — I'll return to that. Record compressor deliveries in the Systems Division, plus additional growth in the Services Division, allowed us to achieve sales growth of 12.6% in Swiss francs and nearly 14% in local currencies. EBIT margin improvements in both divisions produced a 1.2 percentage point gain in the group margin, reaching 12.9%, even with the diluting impact of the Systems Division's larger share of the overall sales mix. That let us deliver an EBIT of CHF 140.8 million. And net income surpassed CHF 100 million for the first time ever, at CHF 105.6 million, up 25% against the prior year, which is restated. Cash flow was also very strong at almost CHF 213 million, resulting in a positive financial position of almost 70% — CHF 70 million at year-end. Alongside this higher profitability and the asset productivity improvement we'll cover later, value creation rose as well, with a RONOA of almost 33%, clearly higher than last year and clearly above our mid-range plan guidance of 25% plus.
So taking that together with a solid balance sheet, it puts the Board in a position to propose this CHF 18, which works out to a 58% payout ratio — completely consistent with our 50% to 70% policy and matching where we stood a year ago. Turning to the following slide, you can see how steady gains on the top line and the bottom line compound across 6 years. Over those 6 years, the top line has risen 10% to 11% each year. In local currencies, actually, it is more like 12% to 13%. Thanks to leverage in the structure along with efficiency gains, we managed that with an FTE increase of just 6% per year. That, together with SG&A leverage and margin gains in both divisions, produced an EBIT increase of 21% per year across the 6 years, and 25% for earnings per share. And we achieved this amid COVID, Russian sanctions, and supply chain disruptions. So it demonstrates how resilient our model is. It also says something about the culture, about the performance culture of this company. Markets shift a great deal each year, yet every year we concentrate on the pockets that are growing.
We're also creating some flexibility within our supply chain and operations, so we can respond to unforeseen events like the U.S. tariffs we're dealing with right now. Let's move on to the systems market. Overall, following the peak in 2022, it began to normalize in '23, and it declined further in '24 overall. Here, my comments will focus on the first 3 segments, which make up the bulk of our order intake, beginning with petrochemical. In this segment, demand for Hyper Compressors in EVA production for solar panels remains strong, particularly in China, driven by geopolitics and by the continued expected growth in solar panels in the years ahead. We sold 7 Hyper Compressors during the year, including 1 in Saudi, versus 8 in the prior year, which was a record. And the pipeline here is still healthy. But as we said last year, in the midterm we expect it to come down to 4, 5 per year in the years to come. The remainder of the petrochemical market — so, the low-pressure petrochemical market — continued at a good pace. It's basically supported by middle class growth in Asia, which requires more polymers, for instance.
And that also pushes demand for Hyper and Laby Compressors. In this market—we've said it before—we keep seeing momentum toward localization in China. For us, that's a certain headwind. We do have our local facility there to capture it, but it's still a certain headwind. Now turning to gas transportation and storage, the strongest segment during the year. Very lively, thanks to the various marine applications, and I'll go through them one by one. To begin with demand for LNG tankers, which rose again following the dip in 2023. And that's supported by the expected very strong increase in LNG export terminals coming online over the next 2 to 3 years, particularly in the U.S. and in Qatar. And for these tankers, the increased—or the renewed—interest in high-pressure LNG tankers, which matters to us because that's where we hold the highest market share, was actually confirmed in the second part of the year. I mentioned at the half year call that there was the new—the shift from one of the engine manufacturers that has focused on high pressure.
At this point every yard is engaged with us, grasping the high-pressure technology, and there could be some orders within the next 12 months or 18 months. Turning now to vessels powered by LNG—container ships and similar types—those are still holding at a solid level. What I mainly attribute that to is that with all the extra LNG export capacity out there, prices for LNG came down. That makes burning LNG increasingly economical as a fuel, on top of the benefits it offers over heavy fuel when it comes to CO2 emissions. LPG tanker applications, the next category, which as you know matters a great deal to us, reached a fresh record. What we witnessed in the first half year carried on through the second half year, though not at precisely the same level. The force behind it is global growth in demand for energy and the necessity of moving energy from where it is produced to where it is transported. We also observed, as I noted at the half year, growth for ammonia tankers. The thing driving that is shipowners' expectations that down the road, ammonia—particularly green ammonia—will serve as a fuel in the marine industry, or as a means of carrying hydrogen, green hydrogen from the Middle East, for example, to Europe.
Overall, then, marine markets are extremely active. And fundamentally, we anticipate this sector staying extremely active over the years ahead, propelled by energy trading and by regulations on sustainable fuels within the marine industry. Now on to the third one, hydrogen for mobility and energy — a different picture. It has clearly recalibrated following the growth we saw over the past 4 years. There are various reasons. One is that green hydrogen costs are clearly above what people expected at the time they drew up their business — they made their business plans a couple of years ago. Also because finalization of regulations and subsidies is delayed, particularly in Europe and, naturally, uncertainty produced by elections. In the U.S., naturally, the Inflation Reduction Act has been really slowed down. But in Europe as well, all of last year's elections were not helpful, since it has slowed down everything. So that's the short term. Now, thinking about the midterm, hydrogen, or green hydrogen, still has a significant role in the energy transition as a green molecule. Last time I spoke about how storing energy in a battery differs from storing it in a molecule.
Molecule is able to hold considerably greater amounts of energy compared with batteries. And with certain applications, batteries simply aren't viable. Electricity can't get the job done there. So over the medium term, we're seeing renewed interest in large-scale projects. And in fact, looking at our pipeline, there are fewer projects, yet the ones that remain are far more concrete. We anticipate the market coming back once more, pushed by pipeline injections, underground storage, and output of hydrogen derivatives such as green ammonia or e-fuels, e-sustainable aviation fuels, and so on. Now over the coming few slides, I'll point to several accomplishments from the fiscal year, beginning with a tremendous lift in our production capacity in Korea. As you're aware, operational excellence ranks as one of the pillars in our strategy. And looking back over recent years, we've managed to soak up that 10%, 11% yearly sales growth essentially inside the same factory walls. And that's precisely what we have now accomplished at BC Korea. BC Korea is our primary site for supplying these high-pressure compressors for LNG tankers. You can see a few of them in the picture. And during 2024, they delivered the orders we had won at the 2022 peak.
So two years afterward, we needed to deliver every one of those compressors. And that is what they had accomplished — they have done it. And in order to hit the capacity needed and satisfy customer orders, we had to raise capacity by 40%. So we completely reworked the factory layout, altered the logistics, and applied lean principles further. And through that, we got to this 24 compressors per year in capacity terms. And that will also let us absorb the possible next peak should one arrive in the years ahead. Also within that same facility, we will actually be able to add one more bay on the same premises. So we have extra capacity, if needed, at a small additional cost. Now on to the second achievement, which I'm sure you will recognize. This is the rollout of BC ACTIVATE, which we announced last year. In fiscal year 2024, BC ACTIVATE was used to analyze over 100 compressors in over — in 19 countries globally. And what is really — that's twice as much as last year. And what's also very interesting, almost 3/4 of them were OBC compressors, so non-Burckhardt compressors. So for us, it's a door into our competitors' machines to do service.
So BC ACTIVATE uses a range of specialized tools—as you can see in the picture—to deliver a diagnosis of how to boost reliability and improve energy consumption and CO2 emissions across our customers' entire fleets. Here as well you can see some of the potential gains or savings we've identified for energy consumption and CO2 emissions. With that, we give customers recommendations and offers so they can improve the situation. And when those improvements are made, it generates service business for us. You can see a few examples, such as 2 hyper upgrades and booster upgrades in Brazil and Thailand, plus maintenance and spare parts for Laby that came about through BC ACTIVATE in Singapore and Uzbekistan, for instance. So a very good start. We're already getting the next step ready—level 2 of BC ACTIVATE—where we now draw on our digital capabilities, which I'll show you in a minute, to understand the most complicated cases. So we have portable digital analytical tools that we take to the customer and use to analyze the compressors. With these, we can grasp the most complicated cases, and we begin making our customers familiar with these new digital solutions.
This brings us to the next highlight. Back in November of last year, I told you about UP! Insight, our first new digital service, which lets you monitor compressors in real time using our own data acquisition equipment and our cloud solution. Today, I want to introduce UP! Detect. It's the next-level digital solution. It runs on the same cloud platform as UP! Insight, but it can be installed on far more compressors since it has its own data acquisition unit. It also adds one more level of intelligence. On top of the compressor monitoring that UP! Insight does, it can spot potential failures before they occur, thanks to artificial intelligence. And it sends an automatic message to the customer pointing out the need for service. With this, our customers can minimize the risk of downtime. And to me, this is very interesting — this new service combines artificial intelligence, which anyone can do. I mean, Google can do artificial intelligence on compressors, but it combines that with something unique that we have. First, as an OEM, we truly understand what goes on inside a compressor. So our knowledge as an OEM helps the model learn much faster.
The next point concerns the foundation we already have with PROGNOST. This company, PROGNOST, has been ours for 15 years, and what it does is essentially compressor monitoring. That gives us an existing customer base. We also have hardware in place, which means we can move much faster when it comes to reaching customers and upgrading their PROGNOST equipment with this new software. Our markets tend to be fairly conservative. Even so, once we launched UP! Detect in March, customer interest was very strong, and we have already sold a few of these services. Looking ahead, we anticipate these services growing increasingly important, since they assist customers in cutting maintenance cost and boosting reliability, while on our side they strengthen customer loyalty and can also generate service business. When we tell a customer that a service needs to be done very soon, they will usually pick up the phone and call us instead of someone else, because we have already understood what can happen. The final example I have here shows how our new digital strategy is paying off. In the past, PROGNOST sat as a completely separate entity inside Burckhardt. We did not even talk to customers — we told customers it was the same.
For 18 months now, PROGNOST has been folded into our digital and sales teams. That lets us build unique selling propositions and sales synergies. In this instance, a customer in Saudi wanted to monitor a compressor built by JSW, the Japanese OEM. Previously, PROGNOST would have pitched their hardware and software — you can see on the left what PROGNOST offers. They might well have taken that project, which would have come to $200,000. Then Burckhardt enters the picture. You likely recall that 4 years ago we bought the JSW compressor drawings and IP. Because of that, nobody understands better than us what actually goes on inside that compressor. In addition, during fiscal year 2024 we opened a new service center in Saudi, which lets us handle installation and commissioning and then give the customer local support. That gave us a unique selling proposition, and we won the project. Compared with the earlier business case, this project came in 10x higher than what PROGNOST alone would have won. Basically, it was a $2 million project. So here you can see how we generate synergies across our solutions by combining PROGNOST with the rest of the organization.
That wraps up the first section of the highlights. Now I want to pull back a little and review how we've done against the mid-range plan in fiscal year 2024. This slide is a familiar one — we show it each time, and it was first presented at the Capital Market Day in 2022. It lays out our 4 strategic pillars, and over the course of the year we've advanced on every one of them. Behind these bullet points sit roughly 20 strategic initiatives, and we completed several of them this year. We also started new ones. The gray area here shows the progress achieved during the year, and I'll point to a few examples. To begin with, we reinforced our core business in China, including in the solar market through the 7 Hyper Compressors we sold. In the marine market as well, with these new solutions created for low-pressure LNG tankers. On the service side, growth in our marine segment carried on and we strengthened our position there further, particularly through dry-dock capabilities that we have improved even more. Operational excellence was another focus for us. You've heard about BC Korea previously, and we have carried this out at other factories too.
During the half-year call, I also brought up the new project, Fit4Growth, which we have in Switzerland—essentially doing something comparable in the Swiss factory to soak up growth inside the factory walls, so that a new factory won't be needed in Europe over the coming years to handle the growth we expect. On Rolf's presentation, you'll also see the leverage of the SG&A and how it improved our EBIT margin. Moving to the next box: the launch of the 2 new digital services, UP! Insight and UP! Detect, clearly helps build new growth avenues. Down in the business foundations, here we carried on with the rollout of our service ERP. We're also fully on track with sustainability, as you'll see in a couple of slides. And last, on the people side, I'd like to highlight the amazing 94% participation rate of our employees in the employee engagement survey. The engagement score result has also risen further versus last year, and that shows we're on the right track with the transformation. Turning now to the Systems Division. Again you have the 4 pillars on the left, the initiatives from the Capital Markets Day, and then the progress made in the division in 2024.
Let me also point to a few areas here. First, under the first pillar, I want to call out the broader coverage we now have in some regions where we see greater potential. In the Middle East there is obviously a great deal of activity; Europe, with the energy transition; and even the U.S., whether that involves old energies or new energies. On the operational excellence pillar, I already brought up Fit4Growth. We are also continuing our work on value engineering, which I covered as a deep dive last year, and we keep expanding the support we receive from our support center in India, where more than 200 engineers and administrative people now support the rest of the world. Finally, we are focused on building new growth avenues. We have begun to grow the sales force, or to build it up, in regions where we see fresh potential. Australia is one of them. South America is another. Turning now to the Services Division. We have likewise made substantial progress in implementing the strategy. Take customer satisfaction: this year we received 1,300 responses from customers, more than -- that is more than last year and still at a very high level of satisfaction. On developments, I already mentioned the new service center in Saudi, but we also set up a new legal entity in Abu Dhabi, which matters for offering local content to customers there.
Regarding operations, as I noted at the half year, we shut down 3 service centers in the U.S. that weren't performing. We've also taken spare parts production further into local markets in China, and in India we purchased new land where a fresh global production center for spare parts is now being built. On creating new growth paths, I mentioned digital services and BC ACTIVATE earlier — those were the key driver over the year. So to sum up, both divisions are making good progress, and we remain on track to deliver the strategy. I'll return to that point later. Given the new U.S. tariff situation, the takeaway is that our strategy stays the same. It remains valid. We simply need to move faster on certain elements, operational excellence in particular. I'll come back to that later. Let me now bring you up to date on sustainability. As you know, these are our 8 material topics, the KPIs and the targets we've set for 2027. Here, essentially, we are on track to hit every KPI. I'd like to spotlight 3 of them. First, on climate, we managed to lower our greenhouse gas emission intensity without the foundry.
That explains why the figure shown here is 38% while the press release cites 40% — reaching 38% in 1 year. With that, we're completely on schedule to hit minus 50% in 2027. The primary lever for delivering this first KPI is our second KPI: renewable electricity. On that front, we've already achieved substantial progress, going from 23% renewable electricity in 2021 to 71% today. That puts us quite near the 75% goal. We got there by completing solar panel projects in Switzerland, Korea and China. We have a large factory roof catching the sun, and we've also purchased additional renewable electricity on the market. Last, health and safety, one of our priorities. As I noted previously, we keep working on our global health and safety standards. Even with the heavier load in the factories, we succeeded in lowering the accident rate to 0.4, clearly aligned with our targets — a maximum of 0.7 per year through 2027. So on the whole, solid progress here, solid progress within the mid-range plan. At this point I'd like to pass things to Rolf Brändli, who will share more detail on the financials.
Thanks, Fabrice, and welcome from me as well to our annual results conference. Before I get into the financials, let me offer a short opening comment. As Fabrice has already noted, we made a change to our accounting policy in 2024. What was the reason for that? Fabrice already gave an indication. We've grown substantially. Our business has expanded, and along with that, so has the count of large projects that run for a long time. So we were looking for a better-allocated value creation process across these projects, and also for greater stability in revenue recognition itself. So we decided to set the threshold: projects valued above CHF 7 million and lasting more than 12 months will be accounted for using the percentage of completion method. Everything else remains under what is called the completed contract method. With this change, we also had to carry out a restatement of the 2023 numbers, and that produced lower sales of CHF 9 million and a reduction at the net income level of CHF 5.6 million. So whenever we compare against prior year figures, you'll see a footnote throughout this presentation that refers to this PoC change. And once again, only the Systems Division is impacted by it.
With that said, let's turn to the broader picture of how we performed. Fabrice has already covered the robust order intake and sales, and in a moment I'll walk you through how that splits across the divisions. At the group level, gross profit rose 20.1%, producing a gross margin of 28%. That is 1.8 percentage points higher than last year, driven principally by a more favorable product mix in both divisions, greater capacity utilization across all manufacturing and assembly facilities, and the scaling back of unprofitable service business in the U.S. Fabrice mentioned selling, marketing and general administrative expenses, which came in at 11.9% of sales. That represents a further leverage of 40 basis points versus the prior year, and it demonstrates the continued operational leverage on SG&A overall, consistent with our mid-range plan. Research and development expenses were up 12.8% to CHF 30 million, equal to 2.7% of sales. That sits comfortably within our target bandwidth of 2.5% to 3% of sales. The increased spending was focused primarily on strengthening our position in the marine and hydrogen markets with new compressor solutions. Other operating income was negative in fiscal '24, at CHF 5.6 million. That largely reflects negative currency effects and the creation of bad debt provisions stemming from a reassessment of polysilicon customers in China, whereas last year's positive result was mainly driven by the opposite situation, namely a recovery of already written off accounts receivables along with some real estate income.
EBIT overall rose sharply, up 23.2% to CHF 140.8 million, which produced an EBIT margin of 12.9%. Financial expenses in total stayed at the prior year's level — that includes our new bond, or the increased bond — and the tax rate was 23%, a bit under last year's. Net income for the fiscal year came to CHF 105.6 million, which means we passed the CHF 100 billion mark for the first time. How does that result split across the divisions? Let's start with Systems. After a peak in 2022, the global systems market normalized further in 2024, with the decline mostly caused by policy shifts in the HME segment. Even so, the Systems Division — its leading position in growing subsegments such as the LPG marine business, Hyper Compressors for EVA, low-density polyethylene and the LNG market — brought in a strong order intake of CHF 825.4 million. That's growth of CHF 5.8 million, or CHF 6.9 million net of foreign exchange currency effects. Thanks to the high order intake from the past 2 to 3 years, sales went up 18.2% net of FX effects, 19.5% to almost CHF 750 million. Additional optimization measures in production logistics and cooperation with strategic suppliers let us deliver a very high number of projects on time in 2024.
Gross profit rose 41.1% from a year earlier, reaching CHF 142.8 million, which produced a gross margin of 19%. That figure sits 3 percentage points higher than the prior year, driven primarily by a more favorable product mix along with the high production capacity utilization at every manufacturing site mentioned earlier. The strong gross margin, combined with additional operational leverage on SG&A expenses, pushed EBIT in the Systems Division up 67.8% to CHF 68 million, resulting in an EBIT margin of 9.1%, which is 2.7 percentage points above last year. Turning now to the Services Division. The Services market has been heavily shaped by differing local economic conditions. Overall order intake declined 5.4% net of FX effects. That works out to a reduction of 4.5%, bringing it to CHF 326 million. The primary driver of this decline was the closure of 3 service centers in the U.S., where our focus is on high-margin locations across the country, along with weakness in European markets, particularly Germany, given economic and political uncertainty during the course of '24. On the brighter side, Asia Pacific, the Middle East, Central Asia, and Eastern Europe all grew at a solid pace, though they were unable to offset the drop in the U.S.
Also in Europe, it's worth noting that service presence has risen further in the marine market, driven both by the expanding installed base and by the robust global service network we have established for Services. Sales came in at CHF 347 million, which is 2.2% higher than the prior year's figure, or 3.1% net of FX effects. The same factors I just referenced at the order intake level have weighed on this rather moderate growth. Gross profit rose at a faster rate, up 6.3% to CHF 163.5 million, producing a gross margin of 47.1%, which is 1.8 percentage points above the prior year. That higher gross margin stems from a greater share of spare parts in the sales mix along with the previously mentioned closure of U.S. facilities, where we cut back the volume of low-margin business. This substantially higher gross profit, after being reduced by one-off expenses tied to the service center closures and by negative FX impacts, still delivered an overall EBIT increase in Services of 2.6% year-over-year, reaching CHF 85.7 million. That works out to an EBIT margin of 24.7%, 10 basis points above the prior year. On this slide, I'd like to walk you briefly through the summarized cash flow statement.
Operating cash flow came in well above the previous year, driven primarily by higher net income and also by favorable net working capital movement as of the balance sheet closing date. We'll take a closer look at that when we get to the balance sheet. Cash flow from investing activities was minus CHF 17 million, made up of CapEx investments totaling CHF 25.4 million. That's roughly in line with depreciation at a high level, mainly maintenance and debottlenecking CapEx, but to achieve the sales we've seen, no growth CapEx investment was required. Also included here is cash in of about CHF 8 million from the sale of property and equipment in connection with the closure of service centers, trucks, real estate, which is shown under this position. Then cash flow from financing activities includes the outflow for last year's dividend payment of CHF 52.5 million, which is CHF 12 million more than the year before. And on top of that, we also repaid bank loans of about CHF 66 million.
On the other side, we raised our bond by CHF 50 million, bringing it to CHF 150 million — once more with a 4 years term and a coupon interest rate quite close to the previous one. Next, currency translation effects were mostly tied to cash positions held by subsidiaries outside Switzerland, and borrowing came down slightly, by CHF 17 million versus the prior year, consisting mainly of the total bond amount of CHF 150 million. As a result, our overall net financial position swung to positive, reaching close to CHF 70 million — a strong turnaround from last year's net debt of minus CHF 62 million. Moving to the balance sheet, we keep showing a robust, balanced equity. Property, plant and equipment stayed at the same level as last year. As I said, we didn't need to spend on any substantial growth. CapEx is worth mentioning. Inventories fell by roughly 4% to CHF 302 million, and the balance among advanced payments received from customers on large projects, work in progress, and advanced payments to suppliers remains positive and rose further by CHF 54 million as of the closing date. Then, even with sales growth of 12.6%, trade receivables finished the fiscal year a bit under last year, at CHF 356 million.
There is one thing, though, that needs to be pointed out: overdue positions exceeding 90 days have grown to 24% of total accounts receivables, whereas 12 months earlier that figure stood at 12%. The rise is tied primarily to projects in China as well as India, where we took on some large projects. In the U.S., actions have already been implemented. And at this moment, we have in the interim collected substantial amounts against those positions. That said, this is a snapshot as of the closing date. Total shareholder equity then increased by CHF 44 million, reaching CHF 340 million. As a result, the equity ratio climbed to 29.1%. That is 120 basis points higher than the prior year, despite the higher dividends paid in '24 and negative FX effects, which also show up in this position. I would now like to update you on RONOA and the value creation slide that we already shared in last year's presentation. Our RONOA rose further to 32.6% in '24, driven by the combination of a higher EBIT margin and greater asset productivity. As the graph on this slide shows, the profitability-level EBIT margin has improved continuously across the past 6 years, rising from 7.4% in fiscal year 2018 to 12.9% in the fiscal year just closed.
So across that same period, asset productivity — put differently, net operating asset sales — has doubled for us, and RONOA rose by over 20 percentage points alongside it. When you look at how we stack up against peers, marked by those dots on the slide, several of them do show a higher EBIT margin, yet none matches our asset productivity, at least among those that have released comparable figures. There's a reason for that too: our business model is tied to this high asset productivity. In Systems, within a systems project, roughly 50% — sometimes even less — consists solely of the compressor. Everything else is auxiliaries such as electric drive, coolers, dampers and so on, which lets us leverage our suppliers' asset base. To produce that roughly 50% of a project's value, we don't require manufacturing capacity or manpower. Turning to earnings per share, they've risen steadily since fiscal year 2018 as well, at a CAGR of 25.1%, reaching CHF 31.20 per share on the back of the strong result, and Fabrice noted that the Board will propose a dividend of CHF 18 per share to the AGM for approval, within the 50% to 70% guidance.
Also worth mentioning: Burckhardt Compression has distributed a dividend to shareholders each and every year since the IPO, with no interruption. And as you may have noticed or come to realize, Burckhardt Compression is again in '24 included in the SPI Select Dividend 20 Index. Then last but not least, on this slide we'd like to share the capital allocation strategy with you, or reaffirm what we already presented during the market — the Capital Market Day in '22 — our disciplined approach when it comes to allocating capital. On the one hand, we support organic growth through maintenance CapEx. Some dedicated CapEx will also be needed for investments in connection with the MRP initiatives, but all of it under RONOA greater WACC conditions. Then on the M&A side, our focus is on bolt-on acquisitions, with an emphasis on the Services Division. That doesn't mean we won't also look into other opportunities. And when it comes to shareholder return, we are committed to redistributing part of the profit within this bandwidth of 50% to 70%. And beyond that, we're aiming — as a kind of ambition level — to have an equity ratio of 30% plus. With this, I'd like to thank you for your attention and hand back to Fabrice.
Thanks, Rolf. Let's move to the section that I'm certain holds your interest too — in particular, our outlook. I'll begin with how U.S. tariffs could affect us, then widen the view to the megatrends underpinning our business, and finish in the middle with the outlook for fiscal year 2025. U.S. tariffs. They pose an obvious near-term difficulty, though largely an indirect one, working through the effect on the economy and on certain customers. If you look at the left side of the slide, the effect falls into 3 areas. First comes the direct effect. We anticipate it will be neutral to slightly negative. In fact, we see no effect at all on our project backlog, for example the projects we hold in the U.S. We likewise see only a limited effect on upcoming projects, since not one of our direct competitors operates a factory in the U.S. That means customers will be the ones paying the tariffs and, put simply, paying more for the compressors. Where a limited effect could arise is our spare parts exports from Switzerland into the U.S., which are currently subject to the steel tariffs, or to the other tariffs, depending.
It's impossible to predict—it shifts daily. Still, that represents a minor portion of what we do, and we're able to localize it gradually, since for the core components of a compressor the customer has no alternative. No one else can manufacture those spare parts. What they can do applies to the simpler spare parts—there they might seek out alternative suppliers. But once more, that's a quite limited share of the business. And as things stand, customers are paying the extra 30% or 50% without pushing back much—they lack the ability—they can't switch quickly. And again, we can localize gradually if they begin to do so. On the macro side, weaker GDP growth might mean softer demand in some regions. And the Swiss franc, too, we should note, could naturally hurt our competitiveness given our Swiss factory. Lastly, turning to the BC markets, we anticipate differing reactions across markets. Looking at hydrogen, the IRA in the U.S. clearly has a negative impact on that market. Looking at the oil price declining, that isn't favorable either, since it makes hydrogen more expensive in relative terms.
When I consider the PCI market, slower GDP growth could likewise reduce demand for polymers, and as a result, demand for extra capacity when it comes to polymer production. But on the other hand, there may be some positives too. As I said earlier, the Middle East. The Middle East possesses abundant energy and inexpensive gas. And geopolitically speaking, it is a neutral location. So we are now seeing investment flowing into the Middle East. China as well. China today remains heavily reliant on petrochemical imports from the U.S. So they keep adding capacity so as to be less dependent. That is the segment-by-segment view. Now, looking concretely at individual projects, we can observe possible delays in decisions from certain customers regarding large projects for new projects — not those that have already begun. Those already running, where they have not yet ordered the compressors, will proceed. New ones might see a slight delay in decisions. On the service side too, for bigger projects such as compressor upgrades, customers may take somewhat longer to decide whether to do it now or wait a few more months to see how the tariff situation develops.
That said — and this covers the remainder of the slide — it's worth emphasizing that our setup is quite stable. First, we hold this very large order backlog, and in 2024 we actually grew it. Our business model is diversified, and we have a global market presence. On top of that, our service business is resilient. I mean, as long — even if growth is zero, those compressors keep running. And since they run daily, they require spare parts. They require maintenance. So that gives us a degree of stability. And lastly, we have a global footprint with local value added, and we can leverage that to avoid tariffs or to clearly work around them. Still, we don't simply depend on that. We have actions underway to mitigate these tariffs' potential impact. And as I mentioned earlier, that basically means accelerating some of the things we were already doing: accelerating operational excellence and MRP initiatives; accelerating local value added, for instance in China with the spare parts in India, as I mentioned before; and also diversifying our offering further by launching new services. So through this, we can mitigate and bring some positive dynamic into our competitiveness and into our orders.
So that's the near term, let's say, and we're monitoring it very closely. And in our outlook, we've factored in all these positives and negatives as we know them today. We'll give you an update on the half year call. There could be quite a few new developments before then. Now, looking beyond the near term, 3 megatrends underpin our business. And our strategy is well positioned to capture the benefits from that. First, the growing global population, particularly the middle class, creates demand for more polymers — I mean, more cars, more furniture, which means more polymers; more transportation, which means more energy. And all of that — more fertilizers for food, et cetera. And all these applications require compressors. Also a new angle: artificial intelligence requires a lot of additional energy. Looking at the U.S., there's a plan suggesting electricity demand in the U.S. could double between now and 2035 purely because of AI. That means more energy, which depending on maybe U.S. states, might come from renewable energy or from natural gas, but clearly there's a need for more energy due to growing global population. And not only is there a need for more energy, but it needs to be more secure.
Geopolitics plays a role — take Europe, where a wave of new LNG import terminals has been built, and those facilities in turn create a requirement for LNG tankers, which drives demand for compressors. A second factor is the difficulty posed by variable renewable power sources such as solar and wind, which generates a need for energy storage — and that storage can also be achieved through molecules, whether natural gas or green molecules. Lastly, even as we move in the right direction — even if certain nations are currently reversing course — the globe keeps advancing its shift toward renewable energies, particularly in Europe and likewise in China. China is progressing at a very rapid pace on this front. The initial consequence is a greater share of natural gas within the worldwide energy mix. Looking at 2024, 40% of the extra energy demand was met by natural gas — far more than oil, coal, nuclear, hydro and everything else. Natural gas is therefore the fastest-growing energy source, which translates into more compressors. Beyond that, naturally, the energy transition calls for fresh infrastructure spending on renewables such as solar panels. That again means Hyper Compressors, hydrogen, green ammonia — and therefore tankers, and so on and so forth. Taking all of this together, regardless of short-term developments, the world is going to require additional compressors.
Our strategy is essentially a continuation of what we laid out at the Capital Markets Day. It's in place as we speak. So with these megatrends and the U.S. tariffs as backdrop, let's turn to the 2025 outlook. To close out the prior slide, we're plainly operating in a dynamic environment that carries some uncertainties. That said, our setup is resilient, and we have mitigation actions ready. Taking all of that into account, for fiscal year 2025 we anticipate sales at a level comparable to 2024 — roughly CHF 1.1 billion for the group — with an EBIT margin likewise similar to 2024's. As for how the year is weighted, we foresee stronger profitability in the latter half, driven by product mix and service mix alike. So in essence, this guidance has us planning to match the record set in 2024 despite a higher Swiss franc. Beyond that, we stay entirely on track toward our 2027 MRP guidance: CHF 1.2 billion in sales with an EBIT margin of 12% to 15%. That brings our presentation to a close. Along with Rolf, I'm happy to take your questions — we'll likely start with the audience here and then go online as questions come in.
Okay, sure. Yes — let's take the first question now.
Adrian Pehl from ODDO BHF here. I actually have two questions. First, regarding your EBIT margin guidance — obviously you aren't really guiding on gross profit, but I was curious to hear, since 2024 has been strong on the gross profit margin as well: should we expect that the stability of the gross profit margin is somewhat a given? Or what do you see in the order backlog you currently hold with respect to that KPI — put differently, do you need OpEx savings in order to hit the EBIT margin target? And my second question concerns the change in accounting toward PoC. I understood that 2023 restated is a bit lower in terms of profits. Should we assume that 2025 will then — and actually that 2024 will then be positively influenced by PoC accounting versus the old standard, or not necessarily?
Appreciate the questions — I'll pass those along to Rolf.
On the first question, it's pretty much, as you said at the end, basically determined by the backlog, since we know which projects get invoiced at what point in time. And because of the product mix, different gross margins are attached to each project. So we have a pretty good view on that one. Then on the PoC side, the restatement in '23 is kind of an effect. Some projects also overlap with '22, which is not restated, and then with '25. For '25, we don't have a set of audited figures that we could share here with you. But what -- for '24, thank you, Fabrice. For '24, we don't have an audited completed contract method set of figures that we could share. So what we can say, however, is that we would have been within the guided range as well. So there's not too much of an impact in '24. And then it's a phase-in that goes then quite smooth down the road also to '25.
To build on what you asked first: we don’t require OpEx savings to achieve that same EBIT margin, which means gross margin should be roughly unchanged. On that point, one thing worth noting is tied to the record LPG tanker orders I referenced earlier. Those orders carry a very strong gross margin, and that will definitely flow through in '25 and in '26 as well—this backlog we’ve built in LPG. Yes, Arben?
I've got a couple of questions. First, on demand: it sounds like you expect things to be fairly stable or perhaps ease a bit across most of your segments, with maybe more pronounced normalization in your solar business. So is that roughly right for how you're reading the market right now? And the second one concerns your service business. Could you size how much sales impact came from those 3 centers you shut? I believe in H1 it was high single digit. And on the service side, I mean, at some point there will be a lift from all the compressors you've sold, but I guess it's still a bit early for that. My guess is it might begin next year. If you could say more about that.
Alright, thank you. I'll handle the 2 market questions and pass the financial one over to Rolf. On solar — yes, that really is one of the main pillars of our order intake in '24. We're in much the same spot as 1 year ago, when I said, well, last year we got 8, this time 7 compressors, very strong demand, and the situation is the same. There's still overcapacity in the solar panel markets. Even so, the backlog, or the pipeline, for that kind of project remains fairly healthy. Still, we don't think it can keep going this way forever. And when will it begin to come down? I don't know. Right now I'm in the same position as last year — the same sort of backlog, plenty of discussions with customers about new projects, and we'll see whether they make the investment decisions or push them back because of the uncertainties we're facing here. On the service market, I believe I mentioned this last year too: you should count 4 to 5 years from the order intake for new equipment to the first service order intake for that equipment. Why does it take so long? Basically, it takes 1.5, 2 years to deliver the compressor, then perhaps 6 months to install it.
After that, there’s a guarantee window of 2 to 3 years during which we perform any needed work at no charge. So all told, it takes 4 to 5 years before the service uplift becomes visible. Returning to the order intake peak in '22, that effect begins to appear in '26, and then '27. As I noted, right now we have over 20 Hyper Compressors in production that haven’t been delivered yet, and those could even begin in '27, '28, since these projects run very long. Then there’s the question about the impact of the closure.
Right, the service center shutdown we announced during the first half of the fiscal year was essentially carried out as well. So that high single-digit figure remains the same. It's roughly CHF 10 million at most.
Any more questions from the room? Yes, one more. Are there really questions coming in from online? Okay. Then maybe we can take one.
Patrick Rafaisz from UBS here, with two or three questions, please. First one would be about how the order environment looks now as we begin fiscal '25. You said there's a risk that some delays could occur, particularly on larger projects that haven't been started yet. Could you give us just a hint about how things have gone at the order level early in the year? That's the first question.
I mean, that's just 2 months. And 6 months is also quite brief from our standpoint, given this big project, which can be somewhat unwieldy. So I'd rather not say too much about 2 months. All I can say is that there's some uncertainty, and that's the reason we state it so plainly.
All right. Turning to the balance sheet and cash flow — the balance sheet shows a very strong net cash position now, at roughly CHF 200 million, plus operating cash flow, though advanced payments are included in that. If we assume a stable revenue environment, how should we think about cash flow this year? My guess is that you'll be building up or absorbing some working capital now. Yes. Is there anything you can share on that?
Rolf, over to you...
Yeah, right. We really can't give guidance on cash flow. That one's pretty tricky. It's a snapshot as of the balance sheet closing date. And in 2024, we had a swing of CHF 50 million — more than CHF 50 million in the balance between advanced payments versus what we've put into work in progress and to suppliers. So a lot also depends on new orders coming in with new advanced payments. It's really not possible for us to guide on that, but I wouldn't expect a tremendous swing there.
All right, and for the third question, I’d like to focus on Services. You discussed quite a bit the new offering involving UP! — it was Detect, correct? — along with the solutions that have already launched. Could you give us some detail on what portion of your service revenues that represents today, and how you anticipate that developing under the mid-range plan?
Right. I mean, UP! Detect came out in March, so it really doesn't affect revenue today. What we've got planned — the digital business sits at roughly CHF 20 million to CHF 25 million, and that includes the PROGNOST hardware and software we know about. I believe I've said that before. And under the mid-range plan, we intend to double it. That's driven by the new services. We're still early on there since we only just launched the services, but the ambition is to double the digital services. And by the way, that project I mentioned — going from a $200,000 project to a $2 million project with more scope — will really help us get to that doubling. Yes, one more.
Yannik Ryf from ZKB. I’ve got a question about the overdue receivables that are past 90 days. I mean, those have more than doubled versus the prior year. I think they rose from CHF 42 million to CHF 86 million. So the question now is how many — how much of that has been paid so far, since you touched on that? That’s my first question. My second question concerns capacity utilization at your production plant. How high was it last year? Was it roughly 80%, 90%? Or are you now running at a certain limit?
Let's start with the first question. The floor is yours.
Yes. On the first one, I mean, these really are big projects. Like I said, we've got projects in China. We have big projects — very big ones — in India. That was in fact the largest stand-alone position. And also in the U.S., where it relates to new energy customers that only bring in cash flow once they have everything up and running and are able to produce <<inaudible>> products. So obviously I can't disclose figures here, just as a snapshot as of today. But what I can say is that the payments are ongoing. We are receiving money. We also always have some leverage because these customers, they need also — they have a time schedule. They have an end customer if it's an EPC. So we have good leverage to get paid. And as we speak, we've received substantial amounts on all these 3 positions.
So all in all, that's not something that concerns you?
No. What I’m saying is that, of course, we needed to reassess the bad debt provisions. That is why we raised them by nearly CHF 5 million for Chinese polysilicon customers, where we viewed the situation as somewhat more critical. Beyond that, there is no cause for concern at this point. And what about capacity?
On capacity — we've delivered a record number of compressors. That puts us at a minimum of 80%, and most likely nearer 90%. We also noted in the annual report that we've delivered 800 — nearly 800 — yet sold close to or roughly 1,100 compressors over the course of the year. Those units will now begin entering production. That's precisely why carrying out the Fit4Growth project in Switzerland matters, so we can push more volume through the factory. So we ought to land very near 90% as the year goes on. Our capacity is sufficient to ship essentially the same sales level, since in '25 we have that same sales level. Even so, we're approaching the capacity required for the CHF 1.2 billion. As I said here, what we need sits in India — for service, the global parts production center, and for systems, an expansion of the factory in India. That's the requirement, along with gross CapEx of roughly CHF 20 million. Okay. Perhaps we'll take a question online from Torsten Sauter at Kepler. First one: could you give an indicative split by application in China? That has shifted considerably over the past few years.
So at this point, with the Hyper Compressors and also with polysilicon — which is what drives our solar panels — that's still, very clearly, the biggest factor behind order intake in China. What's dropped significantly is the refinery side, since China doesn't want to refine its own oil. They'd rather purchase refined product and then move into petrochemicals. Petrochemicals would be the second biggest. So solar might be first, maybe half; petrochemicals, probably around 25%; and the remainder is the new applications we've developed in China that didn't exist 3 years ago — marine applications and hydrogen for mobility and energy, green ammonia. Once again, China keeps going at full speed on green energy, and we do have some orders there. On the second question, how do you expect the geographic revenue mix to shift in the years ahead? As you know, as part of the strategy from our Capital Markets Day, we aimed to lessen our dependence on China, particularly by growing in the U.S., where historically we weren't that strong and we wanted to grow. And that's happening step by step, although if you look at the annual report in terms of sales, the level — the percentage of sales coming from China remains at the same level.
I believe the figure is 42%, if I recall correctly. However, the share of order intake originating from China has definitely declined in '24, which means we'll begin to witness that shift taking place. And at this point, as I said, the U.S. continues to be—remains the central topic, perhaps less so for new energies and perhaps more so for fossil fuels. But the Middle East in particular is a new entrant, something we didn't really observe so strongly 3 years ago. Now the Middle East is going to assist in rebalancing away from China. And Europe as well, with all these new projects for new energies that I referenced earlier, which ought to arrive over the next couple of years, will help Europe expand as a proportion of the total. So this objective of rebalancing away from China is occurring right now and ought to carry on over the next couple of years. Any questions here? Then I'll take the following question from online. Could you give us some indication regarding CapEx over the coming years? This one's for you, Rolf.
Yes. Thanks for asking that. I mean, over the past 4 years, you've seen us sitting in the CHF 20 million to CHF 25 million range for CapEx, which is roughly what we spend on maintenance or replacement CapEx. We also mentioned at the Capital Market Day that we're budgeting roughly CHF 30 million apiece for capacity expansion and for IT investments across a 5 years' time span. It's possible we won't end up spending all of that. Fabrice said earlier that we're in the process of setting up a factory in India. So in the next year, fiscal year 2025, we will definitely have some expansion CapEx, though how much we actually require still remains to be seen. We definitely need something for digitalization, where our whole enterprise architecture is being reviewed and reconfigured so that we're also prepared for additional growth between the 2 divisions by aligning the processes and the tools we currently have in place. That's all I can say.
So all in all, across those 5 years — I mean, the CHF 60 million we referred to at the Capital Markets Day over 5 years — that is definitely sufficient. Let me put it that way. It is definitely sufficient. And I believe your answer also addresses the second question. Next, a question from Adrian <<inaudible>>. Regarding the CHF 86 million in receivables, what causes them to be written off, and when does that happen? What policy do you apply? Do they get written down automatically, or does it depend on a subjective assessment?
Yeah. Thanks for raising that, Adrian. So really, we look at each position individually — it isn't some percentage tied to the overdue base or anything along those lines. Each one gets a thorough assessment. And like I said, as long as customers remain healthy, we've generally got solid leverage to push back on them as well. A lot of our dealings are with EPCs — engineering, procurement contracting firms — where, well, getting money out of their pockets is tough, but that's exactly when we apply pressure, since they need spare parts services and people for installation. So every case gets looked at on its own. Nothing here runs on an automated process.
All right, are there any more questions from the online side? Any — yes. Let's take one more.
Yes, I have a follow-up question, please. I was just wondering whether you might give us some initial thoughts. Yesterday, the announced merger between Chart Industries and Flowserve came out. Howden belongs to Chart, correct? They make reciprocating compressors. Do you have any thoughts?
Yes. Regarding the background, Howden was among our main rivals as an independent company, 2, 3 years ago, and then Chart bought them. In fact, they weren't truly folded into Chart, since it's a different kind of business. Chart does a great deal of process equipment. In this case, it's an OEM for turning machines. As a result, the plants are entirely distinct. So we have -- and they retained the Howden brand. So essentially, nothing much shifted for us. They remained present as Howden. Now Chart itself has been purchased by an even larger company, Flowserve, which focuses particularly on pumps, I mean flow control, and so on. I don't see any reason Howden would be altered. My read is that they'll keep running Howden in the same manner, more or less independently. So from our standpoint, we ought to keep viewing it as an independent company and as a rival. I likewise doubt that membership in Flowserve gives them any edge over us. We didn't observe that while they were part of Chart. The plants, again, are different. What we have witnessed, on the other hand, is that when rivals get acquired -- for example, Dresser-Rand was a very formidable competitor in the past. I mean, they hold most of the installed base in the U.S., for example.
Siemens acquired them, and they're now within Siemens Energy. Since that happened, they've somehow turned into a far less significant competitor. What's the reason? The thing is, reciprocating compressors are usually smaller than everything else in their lineup — turbines and so forth, and so on. So management — I'd guess the sales staff — concentrates on the large items, and reciprocating compressors end up getting less attention, that's our assumption. On the service side as well, they've turned into a piece of a large conglomerate. And usually that does nothing to strengthen a service mindset or responsiveness. So when it comes to service, this player is likewise much less visible to us. So what happens with Howden, I can't say. Once again, up to now, being under Chart, nothing changed. I don't expect any change from being under Flowserve. Thank you. Good question. There was one more.
Yes, I actually have a question about your capital spending, if that's alright. So, if I understood correctly, you're obviously working to bring your DSO down, so working capital ought to improve over the years. You want to raise your margin. So that should ultimately mean very strong cash flow over the next couple of years. And I assume your balance sheet keeps deleveraging even with the payout ratio you've laid out, obviously. So at some point, once you hit your medium-term goals, would you also consider remunerating shareholders a bit more, say through a share buyback? Is that an option? And second, since you've mentioned bolt-on acquisitions, is that something you'll keep pursuing? Or do you feel you're well set up with the technology portfolio you have?
Thank you. Good questions — and perhaps you can add to this, but I'll begin with an answer. First, the balance sheet as it stands today is really quite strong, with a net position that's positive. I'd say that right now, given the uncertainty, that isn't a bad thing in itself. But yes, at least one time each year, we go through every option, laying all of them out on the table for the Board — how should we deploy the cash, what leverage level do we want — and we run some projections. And as of today, no options are off the table. All of it gets discussed. And then the method — were we to go that route, the method for returning cash to shareholders also gets discussed, so nothing is excluded. Now, yes, we do have some CapEx for fiscal year 2025. So we need some cash for that. On net working capital, we've now seen positive financing of projects of about CHF 60 million. After we deliver those projects, that should normalize. And on M&A, bolt-on acquisitions, we are — we currently have a couple, quite active, not large things, because typically in our business, if we want to stay focused on reciprocating compressors, which is where our strength lies, then the number of targets is fairly limited.
Yet regarding the service side, we’re seeing some — right now, we have interesting targets, so we’re holding back some money for that. And with the uncertainties, you never know if an OEM — perhaps a smaller player — might come into the market, so we’re ready to step in and need some cash for that. So again, I think that ties back to the graphs Rolf showed. All options are here with the priorities: organic CapEx, M&A, but when the options become too much, we’ll look at it at least once per month and make some decisions, or the Board will make some decisions. Very good. Last chance? No? Then not online either, so thank you very much for your attention online. Thank you for being here with us, and I’d like to close this presentation now. And for those who are here, we have a small aperitif outside. Thank you for your presence and for your attention.
Thanks a lot.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Burckhardt Compression Holding AG transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Burckhardt Compression Holding AG earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.