Home / Transcripts / Draganfly Inc. (DPRO) · November 12, 2025

Draganfly Inc. (DPRO) Earnings Call Transcript

November 12, 2025

Canadian Securities Exchange CA Industrials Aerospace and Defense earnings 48 min

Earnings Call Speaker Segments

Rolly Bustos executive
#1

Okay, in the interest of everyone's time, let's begin immediately. Once more, hello and welcome to every shareholder and stakeholder joining us today for Draganfly's 2025 Q3 Earnings Call. I'm Rolly Bustos, Internal Investor Relations Representative at Draganfly. Thank you for being with us. As usual, we'll begin with our CEO and President, Cameron Chell, who will recap highlights from the third quarter's earnings. After that, our CFO, Paul Sun, will take us through a more detailed financial review. As always, we'll wrap up by responding to the questions submitted in advance. Feel free to contact me at investor.relations@draganfly.com at any time should you have additional questions. I'd like to remind everyone that forward-looking information and statements may be part of this presentation. Such statements do not constitute guarantees of future performance or financial results, and they should not be relied upon unduly. Future events or financial results could differ from those potentially discussed here. The company's results and statements are accurate as of today, November the 12th, 2025. Outside of material press release disclosure going forward, we have no obligation to update or renew these statements. The complete forward-looking disclaimer is visible on the screen at this moment.

Rolly Bustos executive
#2

Alright, Cam, whenever you're set, please take it away.

Cameron Chell executive
#3

That's great. Thanks, Rolly. I really appreciate it. And thank you, everyone, for spending part of your day with us. Your time and attention mean a lot to us. So perhaps I'll jump straight into the key points. Revenue for Q3 2025 came in at $2.155 million, which is up 14.4% compared with the same period last year. That figure includes $1.6 million in product sales along with roughly $530,000 from services. Gross profit reached $420,000, and our cash balance on September 30th, 2025, stood at slightly under $70 million. So let me walk through a handful of the quarter's highlights. These in particular are the ones we saw as clearly material and meaningful both for shareholders and for our future revenues. First, we are introducing the Outrider Southern Border drone, a multi-mission drone now in live operations at Cochise County. Essentially, in that whole operation, the Southern Border sheriffs have commissioned an Outrider drone — a drone we built together with those sheriffs so it could handle the very specific mission sets needed along the Southern Border. This highly distinctive drone, which has a large addressable border opportunity worldwide, not only along the Southern Border, is in fact a drone that is uniquely positioned to perform essentially anything a fixed-wing surveillance aircraft can do, while offering the versatility of a heavy-lift multi-rotor drone.

Cameron Chell executive
#4

We'll go into a bit more detail, and I'm aware there are some questions that came in on that topic too. So for us, that was a really meaningful win. In fact, next Monday we'll be conducting the first missions, with that drone becoming live and operational. So we're genuinely excited about the roughly 100 government and international representatives who'll be on hand to observe and take part in those missions along the Arizona border. We've also strengthened our military and defense capabilities considerably by appointing Victor Meyer and Keith Kimmel. Both are highly accomplished warfighters who bring extremely strong educational and operational backgrounds. They're leading our military board of advisors. They operate within the business and support our sales teams along with our operational team. So we're absolutely delighted to have them with us. They're very well known, certainly in the community. Palladyne AI approached us, and we were very pleased to put a deal together with them. So we're collaborating on a specific opportunity that a military customer brought to us. Beyond that, we're assembling and integrating their AI into our drone fleet.

Cameron Chell executive
#5

There are multiple AIs we're integrating into the drone fleet we operate. Our approach to AI is roughly the same as how we handle payloads. The point is that since every one of our systems is modular, be it a specific camera type, a specific payload type, a specific sensor type, or even a specific AI type, the whole of our system — from hardware all the way through software and through design — is managed such that everything can be modular. So when a customer approaches us with a particular workflow requirement calling for one specific AI rather than another, we're able to build that in. Palladyne, meanwhile, has done tremendous work in this industry, particularly when it comes to swarming. That's why we're truly thrilled about the opportunity we've managed to create together. They've been able to build something with us, and we with them. So we anticipate great results from this relationship. And it does begin with one specific customer that we're currently engaged with. We also put out the news that Drone Nerds, the biggest reseller in the United States, has picked up the Draganfly line — especially for public safety, though for military too.

Cameron Chell executive
#6

We invested around a year collaborating with them, largely to make sure we’re strongly positioned within the customer base they serve. They are an extremely discerning organization, and our offerings align very well with their NDAA compliance strategy. It’s worth noting — and I believe I’m being fully accurate in saying this — that when it comes to a manufacturer, not only in North America but anywhere globally, that offers a comprehensive lineup of NDAA compliant drones, I think Draganfly can be identified as the leader, if not essentially the sole NDAA compliant manufacturer out there with five-plus drone systems that are all NDAA compliant. Those span from small FPV drones that we sell into the military all the way to the Outrider drone, a hybrid dual-diesel engine platform with seven-hour endurance and 100-pound capacity. So Drone Nerds now has this capability to offer that entire product line, especially down to their public safety. So we’re truly thrilled to have been chosen by them and to get to work with them. We also had an excellent show at AUSA, and that was genuinely meaningful for us. AUSA is the Association of the United States Army show, basically the major military show in the United States.

Cameron Chell executive
#7

At that event, we had a chance to exhibit alongside our partner — that's the next item worth spotlighting — Global Ordnance. Among the biggest of what are called DLA primes, Global Ordnance ranks as one of the largest providers of munitions and equipment going into Ukraine, as an illustration, among lots of other activities, and it's an organization worth multiple billions of dollars. They showcased our drones together with their own offerings and have since pulled us into several opportunities that we're pursuing jointly with them. For Draganfly, this show truly served as a debut in terms of what we can do and our capacity, and the response we got was simply overwhelming. That was further underscored by a highly notable announcement we made with the US Army, which we'll get to in just a moment. We additionally announced that Autonomy Labs — a terrific and robust company based in the UK — essentially made the decision to standardize on our platform, specifically the heavy lift, meaning the electric version rather than the hybrid one, so they can deploy their mine clearing solution, which they refer to as carpet. In my view at least, that's another excellent illustration of payload companies aiming to take advantage of the drone market while searching for the appropriate manufacturer and solution provider to actually design their payloads around.

Cameron Chell executive
#8

A crucial element of both our modular approach and our complete product range is this: a payload can only succeed as a drone platform to the extent that it has a drone it can actually fly on. Our central strategy is being able to serve those channel partners and payload companies — again, whether that means things such as LED signs we've worked with previously, or mine clearing carpets, or specific camera systems or AI systems. The more of these we can bring into our drones, the larger the channel into which those payload providers are in fact selling as well. That's a vital piece. With Draganfly having spent 25+ years in this business now, we possess that experience needed to bring all those other payloads onboard. It takes considerable time to accumulate enough integrations to create some critical mass around someone — an end user or customer saying, "Hey, hold on, I need to run this payload, not only on a small ISR drone, but I also need to pair it with a medium-lift logistics drone." So when they can make one investment in a particular payload yet apply it across multiple use cases, since they have drones of differing sizes that those payloads can mount on, we're discovering that this is a major strategic differentiator, or accommodator, if you like, for the customers we're working with in the market along with our payload providers.

Cameron Chell executive
#9

Once more, we're really excited about having completed this project alongside Autonomy Labs. At the DSEI show in London, we exhibited together with them. Pardon me — in terms of the volume of orders they were setting up and the testing they have underway with a number of militaries across the globe, they truly exceeded expectations. At the invitation-only US Army T-REX experimental showcase, we also put both our Flex FPV and our Commander 3XL platform on display. As I said, we were present there by invitation, in fact. We were showing the 3XL and the FPV and how the two can operate together. Again, when you consider that Commander 3XL — positioned above my left shoulder here — the flat bottom really stands out, since it provides an enormous surface area for various payloads and multiple sensor capabilities, and so consider as well the FPVs beneath that platform. You have the 3XL, capable of transporting FPVs to a specific location, perhaps a GPS-denied location, because the 3XL can manage the level of sophistication and the radios needed to fly in those environments and then release FPVs from close range.

Cameron Chell executive
#10

Moving on to the next significant item: we're now far along in establishing seven additional plants across the United States under our contract manufacturing setup. Tooling work at those facilities is underway at this moment. Once complete, that will expand our capacity by more than four times. For anyone unaware, in our existing plants we have roughly $100 million of capacity that is only now beginning to come online. Getting it fully built out took us until around Q3. Production is now starting on those lines, especially for the U.S. Army order we announced roughly four weeks ago, and so these seven new plants, coming online in response to demand we already see flowing in, will provide approximately four times that capacity by the close of next year. Choosing the company to partner with was a demanding process, but the group we picked has a real specialty — they are excellent at contract manufacturing. They proved highly flexible regarding the tooling and training we must supply, and they are exceptionally strong in global logistics and supply chain management, which matters enormously to us, particularly given the kinds of Army orders we are now considering.

Cameron Chell executive
#11

I think we're also in a position that's quite unique as a company to back not only NATO but especially the Canadian government. So Canada has announced at this point that 5% of their GDP will be shifting toward defense spending. That amounts to literally billions of dollars in fresh spending during this coming year. And upwards of CAD 2 billion will be spent over the next couple of years on drone technology alone. Now, thanks to the unfortunate tariff war—which, between Canada and the United States, is working out fantastic for Draganfly—Canada right now has a very explicit buy Canadian policy. And since we have manufacturing plants and strong roots from Canada, we're positioned very well there, and we have several initiatives ongoing to address that market. And there might be two companies in the entire country of Canada that can serve that market for the Canadian DND. In fact, the other company at present only has one particular type of drone, and it's more of a helicopter that would address that. So we think we're incredibly well positioned up there and thrilled to be of service to that nation—not only to the nation of Canada, but because of our Canadian manufacturing, our opportunities in the Arctic, both with the U.S., NORAD, Canada, and the Arctic states of Sweden, Denmark, etc., really seem to be burgeoning quite well also.

Cameron Chell executive
#12

So once more, I'd really like to claim that this was something we planned. It wasn't. Luck plays a bigger role here than anything else. Still, we're extremely proud to find ourselves in this position, and we're eager to serve those organizations and customers in the years ahead. And then a Fortune 50 telecom company began purchasing our heavy-lift drones. In this instance, their heavy-lift drone is deployed to support communications after natural disasters, and we've been extremely hopeful about expanding the relationship with this particular Fortune 50 telecommunications company, so this fits within two major initiatives now underway. To begin with, they are shifting away from Chinese manufacturing, and they stated very clearly that they required a truly dependable long-term partner with NDAA-compliant drones and the ability to serve them at scale, so this was an initial order, yet it was a highly significant order for us, and should we receive additional orders from this company, we view that as their signal that they are standardizing on our fleet, and naturally, those order sizes reach well into the hundreds, and by hundreds I mean, once again, I'm not referring to a small ISR drone.

Cameron Chell executive
#13

What I'm referring to is a quite large drone, nine feet across, with remarkable capabilities — it's being used to stand up cell towers, it has tethered components attached, and so on. And then, naturally, a highly notable event that followed in Q3, which was amazing for us both as a company and for shareholders, was our announcement of an order for our FPVs from the U.S. Army. On this specific order, we do have to stay reticent about certain details, but what I can say is that the reason we secured it, I believe — I like to think it's because we possess a fantastic FPV platform featuring some truly unique characteristics that came out of our experience with boots on the ground in the Ukraine since 2022. Yet I believe the additional reason we honestly won this is that this order isn't merely about supplying drones. What it actually provides is supply chain and logistical support. We are in fact training that particular section of the Army to assemble and manufacture our drones themselves, enabling them to make modifications on the fly. And then we are backing that up and handling the logistics for resupplying all of those drones into those locations. So in effect it's Draganfly manufacturing at a US Army location and, presumably, hopefully, locations.

Cameron Chell executive
#14

This is genuinely a big deal. Putting this order together took roughly 18 months, perhaps a bit more. And that's partly why, around two years back — actually a bit under two years, about 18 months ago, sorry — we began expanding our capacity. Basically, during the past two years we've had to limit our sales. We needed to rebuild quite a bit of our capacity so we could handle the demand from this order along with other comparable orders we expect to result from it. So, just to give a quick recap, this is our drone platform. What you see in this view doesn't include the Outrider drone, which goes live next Monday on the Arizona border. That drone would look quite similar to the one on the far right, the heavy-lift drone. Except that it also has combustion engines, and it can come in a variant with either 1 or 2 engines. It's able to fly as long as 7 hours and carry 100 pounds of payload. That drone will handle everything from communications, mesh networking, surveillance, reconnaissance, actual interdiction, logistical resupply, medical emergency support, and many, many other things.

Cameron Chell executive
#15

What I'd say is this is genuinely a drone that suits an amazingly wide range of applications. Next Monday's event will bring in more than 100 attendees from a number of nations, and all of them are pretty focused on the border. What we're hearing right now is that although we named this drone the Outrider, most folks now refer to it as the Border Drone, since that's exactly what it was built for. For this specific product line, the TAM for border and border surveillance with drones comes to hundreds of millions of dollars annually on a global basis. So our expectations are fairly high, and the early signals certainly suggest this will be a leading sales driver for us even next year, despite the fact that we hadn't expected it to contribute heavily to sales before 2027. You can see the rest of the drone lineup there, which I believe I've covered reasonably well on earlier calls. What matters most here is that every one of them is interoperable, and all the payloads work across them. Once we've completed an integration on a single drone, whether that involves AI — and yes, our Flex, and even the FPV drone shown there, has AI built in — whether we do it with that drone or all the way up to the heavy-lift drone or the Commander, pardon me, the Outrider drone, you're dealing with one shared common operating environment, identical connections, the same buttons in the same locations, flight characteristics, and so on and so forth.

Cameron Chell executive
#16

It's worth mentioning too that legacy DJI payloads which DJI itself supported are compatible with this modular design. So suppose someone has money tied up in a payload — they own FLIR cameras or something along those lines — and they're being forced to retire their DJI fleet, yet they don't want to write off what they've put into those FLIR cameras or other payloads; well, those payloads plug directly into our setup too. So again, that's some experience that has helped us reason through the question of how we move customers onto a brand-new full product line. I won't take much time on this, but essentially, the military impact of what's going on in the small UAV market is staggering. In just the past couple of weeks, we saw the US government discussing procuring well over a million drones. And I know one question that came in was whether we believe we'll capture our share of that. Absolutely — that's exactly what we've planned for over the years and worked toward. We're among a handful of North American companies possessing the capability or capacity to satisfy that demand. We're quite enthusiastic about developments on that front.

Cameron Chell executive
#17

There's actually some validation we can point to on the Army orders — the ones we sold earlier into Special Forces and are now selling into the Army — along with the many other initiatives we have underway throughout the whole Department of Defense. So at this point, what I'd like to do is hand things over to Paul Sun, our CFO, so he can walk everyone through our financial highlights. Paul?

Paul Sun executive
#18

Okay, thanks Cam, and thanks everybody for being here — appreciate it. All right, so let me walk you through these tables. Third-quarter revenue came in at CAD 2.16 million, which is a 14.4% increase over CAD 1.89 million in Q3 of 2024. That third-quarter revenue was made up of $1.62 million in product sales, and the remainder came from the drone services Cam referred to at the start. Gross profit was $421,000 this quarter, versus $441,000 in Q3 of last year. This quarter included a one-time, non-cash inventory write-down of $43,000, and absent that, gross profit would have been $464,000. For Q3 of 2024, gross profit would have come to $617,000 if we removed the one-time inventory write-down of $176,000 from the prior-year period. So when you factor in those non-cash items, gross margin would have been 21.5% this quarter against 32.7% year over year. Total comprehensive loss for the quarter was $5.4 million, compared with a loss of $364,000 in the same quarter a year ago. This quarter included non-cash changes made up of a $1.8 million fair value loss on derivative liability, the $43,000 inventory write-down I mentioned, and a $35,000 gain on a notes receivable. So excluding those, it would have been a comprehensive loss of $3.6 million.

Paul Sun executive
#19

In the same period a year earlier, we had a one-time non-cash change in derivative liability of $3.6 million, the $176,000 inventory write-down I mentioned, and then a gain on an impairment note of $8,000. So last year's comprehensive loss would have come to $3.8 million. That reduction in loss is mainly attributable to a foreign exchange gain and lower professional fees, offset by higher office and miscellaneous costs, wage costs, and share-based payments. Let's move to the next slide, please. Yeah, we just covered the year-over-year changes. So here, I'll go quarter-over-quarter between Q3 of this year and Q2 of this year. Revenue for Q3 2025 rose CAD 41,000 to CAD 2.16 million, up from CAD 2.12 million in Q2 of 2025, a 2% increase driven by higher product sales. Gross margin for Q3 2025, again, came in at 19.5% versus 23.9% for Q2 2025. Again, if we exclude that one-time inventory write-down mentioned earlier for Q3 and the CAD 10,000 write-down from Q2 2025, gross margin, again, would have been 21.5% for Q3 and 24.3% for Q2, with the difference being product mix during the quarters. Total comprehensive loss for Q3, again, was CAD 5.4 million compared to CAD 4.7 million for Q2 of 2025.

Paul Sun executive
#20

Also, just to remind everyone, we recorded a CAD 1.8 million loss in fair value of derivative liability, a CAD 43,000 inventory write-down, and a CAD 35,000 gain on the note. That means the comprehensive loss would have come in at CAD 3.6 million. When we adjust for the non-cash items in Q2 — which were a $180,000 non-cash gain on derivative liability, a $10,000 inventory write-down, and an $8,000 gain on a note — that loss would have been $4.6 million. The decrease in loss from quarter to quarter is mainly attributable to the foreign exchange gain and lower professional fees, partly offset by wage costs and share-based payments. Let's move to the next slide, please. Yeah. So, taking a look at some high-level balance sheet items here, you can see total assets rose from $10.2 million at the end of 2024 to $77 million, which is mostly because of the increase in cash over the year. Working capital at the end of September stood at $69 million versus $3.8 million at the end of December. But if we excluded the $3 million fair value of derivative liability, working capital would have been a surplus of $73 million this quarter and $6 million at the end of December last year.

Paul Sun executive
#21

If we run that same calculation for shareholders' equity at the close of this quarter, we'd get $73 million, compared with the $70 million shown, and $6.8 million at December's end, versus the $4.6 million shown here. As you can see, our debt remains minimal. As Cam mentioned at the start, our company's cash balance stood at $69.9 million at the end of September, against $6.3 million at the end of December. With that, I'll hand it back to you, Cam.

Cameron Chell executive
#22

Okay, thank you Paul. Appreciate it. What I'm going to do at this point, if that works for everyone, is move into a few of the questions. Nine questions have come in. I'll definitely try to be prompt and address them as soon as is reasonably and regulatorily feasible. So the first one we have here asks: it appears you now hold more cash than at any previous point. What scenarios or use cases exist for any possible future raise? We'll take an opportunistic approach to any potential future raises. I believe we've brought in less cash, certainly, than our comparables in the market. We're mindful that cash represents a strategic advantage. Having said that, we are highly, highly attuned to dilution and shareholder value. So essentially, we hold CAD 70 million in cash. We're using roughly CAD 1.5 million per month. Things are scaling wonderfully. The pipelines are literally — I can't even quote the figures because they're genuinely, truly unbelievable. So there isn't an urgent need to bring in cash. Certainly, as a business that has existed for 27 years, we're capable of doing so. We believe we have very strong visibility toward being EBITDA positive and cash flow positive at some point here.

Cameron Chell executive
#23

With that said, certain acquisitions do hold appeal for us. To be clear, these aren't necessarily deals centered on technology or a specific product. What we look for in acquisitions—and I believe this sets us apart somewhat from peers out there—centers heavily on people. So we have the. We're lucky enough to be in a position where we can build what we sell and integrate what we sell. Ours is a strongly engineering-driven, customer-integration organization. What matters most to us, then, is securing the right team and the right people capable of pulling that off. So there are a few rather cool acquisitions out there whose strong products and tech align with our efforts, yet they're likely not the size or scale that some of our comparables out there are pursuing, since what truly draws us is culture—how those individuals fit in, how we serve our customers better, how that scales, how it contributes to the scalability our customers currently demand of us, given that the scalability being asked of us is genuinely astronomical. So it isn't about piling on additional acquisitions, which can sometimes create more problems.

Cameron Chell executive
#24

What we're truly focused on is bringing in the right personalities, the right people, and the right leadership and technical capability so we can satisfy the demand that exists right now. Naturally, the customers who are placing those demands — and that's really where the market stands at present — we want them to feel incredibly confident about the people we're adding. So that's generally a bit of where our acquisition focus lies, which I believe is likely another one of the questions in here. As for raises, if we needed to do a raise for an acquisition, we would consider it. If it were opportunistic in the market — everyone says that when the cash is there and you're in a growth phase, you really want to make sure you don't pass it up. But we're certainly going to be prudent about that to the best of our ability. So the second question that came in is, can you expand on the press release about manufacturing and overseas military facilities? How large is the potential here in terms of revenue? Are the financial metrics of this much different than when manufacturing is done in North America and then shipped as a final product?

Cameron Chell executive
#25

I can address this only up to a certain point. The overseas manufacturing sites are quite specifically military installations, and what happens there is production of a Draganfly product. Really, it's closer to assembly work than true manufacturing. The main reason behind this is that those sites must have the ability to modify things and possess capabilities without having to run through a procurement cycle just to order some new capability for a drone. They have to be able to carry out those modifications and similar work on their own. They need training in manufacturing, in modifying, in repairing, and in changing the product as the concept of operations shifts along with their tactical situation at any given moment. That is essentially the core premise. Beyond that, the other question is whether an Army base could ever really do this at scale. Consider what's going on in places such as Ukraine at present — individual brigades there are employing hundreds of thousands of drones each month. So that kind of scale isn't something you'll achieve on an Army base. You therefore need a partner capable of still delivering that scale into your theater of operations, even while you retain the ability to make modifications or push your technology or tactics forward.

Cameron Chell executive
#26

So that's closer to the kind of relationship we have here, and that's exactly why it's so strategic and such a major deal. On the scale question, the only thing I can tell you is that the US Department of Defense has a great many brigades, and so do all the NATO and Five Eyes nations. And at AUSA, one of the Army's big announcements was that every soldier will receive training on a drone — every single soldier. The reason being, if you consider those FPVs at the moment — which are merely the tip of the iceberg relative to what's coming, and they're the current focus — basically, each soldier carries a grenade capable of traveling 10 km. That's what they opt to use it for. So the scale is truly enormous. But then, when you factor in what's taking place on the logistics side, the resupply side, all of the rest of it, and the fact that they require that embedded manufacturing capability — which is what we're terming it, a hybrid embedded manufacturing — I genuinely am not at liberty to disclose the sizes, but you can work it out quite fast: these are numbers that are simply astronomical.

Cameron Chell executive
#27

The U.S. has said it plans to order millions of drones. Do you figure we can capture a meaningful slice of that? I believe so. It doesn't need to represent a large percentage for it to matter. At Draganfly, our ethos is making certain that each customer we serve — military, industrial, commercial, whatever the situation — our job is helping guarantee that customer is unbeatable, truly without equal. Again, whether the customer is military or industrial, what we enjoy doing is adding value. Will we someday become the biggest drone manufacturer on earth or anything like that? I don't know, and honestly that isn't our goal. We want to be the finest partner our customers could have, the one that makes them impossible to compete with. We truly want to remain that high-value, highly sought-after organization bringing plenty of experience and plenty of consciousness to the table regarding the products and services we can enable for our customers. The short answer is yes, I think we can get a piece of it, and we'll simply keep working toward that. Canada has said it wants to buy drones made in Canada.

Cameron Chell executive
#28

Should we anticipate substantial orders from Canada and the Department of National Defence at some stage? I think so. There's no way for me to offer predictability or deeper visibility, yet in my view we're far better placed than anyone else globally to deliver against that enormous budget. Canada isn't typically thought of as a military power, but even so, it ranks roughly seventh among the world's largest economies, and now 5% of that economy is flowing into rearmament and rethinking how they operate, with a very significant share directed toward drone technologies — just like every military budget today, since we've entered a wholly new era in which everything is becoming not merely about automation but about autonomy, and the forefront of autonomy is frankly drones, whether that means controlling autonomy, operating autonomously, being in airspace, managing airspace, all of it. Drones sit at that leading edge. That's why even modest military budgets matter now, given how much of the money is concentrated in this specific domain. So does border security remain the company's primary focus? Yes. If Cochise County and the Southern Sheriffs tell us anything about where we've been lucky enough — truly blessed — to position ourselves as a border management specialist, it's not only through our drones but also via our tactical solutions team, so we can grasp the CONOPS and translate that grasp of the CONOPS into workable equipment.

Cameron Chell executive
#29

Border management and border security are an enormous, enormous part of what we do. And I really do think we're positioned uniquely there, because it's a specific specialty that goes beyond just ISR. When people are crossing that border, you have search and rescue scenarios, you have human trafficking, you have weapons, you have armed militias, you have drugs being brought in, so the range of what's taking place is incredibly wide, which means you need a specialized team that genuinely knows how to collaborate with law enforcement professionals and the extraordinarily brave individuals along the border who keep our economy and our people safe, so that we can deliver that service — so again, those tactical solutions we offer, the integrated services we have at a tactical level, are truly our strategic differentiator when it comes to building great product. Do we anticipate consolidation in the drone industry? Absolutely. Yes. I believe we'll keep seeing a major expansion. Plenty of small companies are talking about a million drones. They're talking about making procurement easier. This isn't an easy business. You're talking about putting aircraft in the air. And no matter how you look at it, plenty of people order parts off Amazon and believe they can build a drone.

Cameron Chell executive
#30

So, when you're discussing manufacturing drones at these volumes, with requirements that are mission-critical and/or operating them above people or vehicles or similar situations, I mean, you're simply working in a space that the majority of people don't grasp. And then, on top of that, attempting to scale up production — that brings an entirely different set of challenges. So we believe a big wave of folks is coming. A big wave of folks is already entering the industry. We've witnessed it seven or eight times over the last 25 years. There will be fallout from it, and there will be great talent available out there. We're hopeful to pick up some of that talent, because there are super talented people in lots of organizations working on these problems, including our comps out there. I think our comps, who are probably obvious names, are going to do great. There's sort of like the four or five companies out there that have kind of made it through some very lean times, have some capacity, capability now, have some experience, and they've got enough scars. All of us have enough scars that we're going to muddle our way through and be able to solve these solutions or solve these problems at scale.

Cameron Chell executive
#31

I'd say the industry overall is beginning to take shape pretty well. A few private players will also perform strongly, but sure, consolidation is coming—it always does. So could you update us on your production capacity and whether you intend to expand it in 2026? Yeah. Our top priority is organic capacity, which handles roughly $100 million. That's what we're really focused on ensuring we have streaming in 2026. That said, we're adding more capacity during 2026, so it will grow well past that level. Still, organic capability is where our attention lies. One reason we're bringing outsourcing capability online is to support some of our supply chain management and to supply from various regions of the countries and various border areas, so we get efficiency on tariffs, on manufacturing, on delivery, on supply chain, and so on. So again, our positioning is fairly unique when it comes to North American manufacturing and being able to serve every part of North America and Europe—especially European manufacturing. So again, it wasn't in the master plan, but it certainly turned out well for us.

Cameron Chell executive
#32

It may have been a small piece of the master plan, though not a very large one. So could you share what share of revenues would be military as opposed to commercial? And do you anticipate military becoming a significant portion of your revenue down the road? Yeah. At present, I'd say our revenue has been capped for the last couple of years, and that is certainly about to shift very rapidly now, or is already shifting very rapidly. And I'd characterize military as roughly 30-ish% of that. But come next year, it'll be 90%, simply because one single order dwarfs the figures we've posted over the last three years. And multiple types of those orders are falling into place. So it could be 99%. Our commercial or public safety market might rise 200% this year, and military sales will still be 90%, simply because the individual order sizes, plus the resupply and everything else, is just so absolutely mind-boggling. So what do you believe sets Draganfly apart? Our integrated practices, our integrated tactical services. That is a major differentiator for us. So when we worked on the Cochise product, we spent months on the border, on horseback, on ATV.

Cameron Chell executive
#33

We understand where those communication gaps existed. We came to understand the cartels' locations, their mindset, how they run things, the methods they use — all of that. After that, we met with the sheriffs along the Southern Border, and we devoted that time to designing the solution, the capabilities they require us to deliver. So whether it was that case, whether it was certain industrial clients of ours, whether it was the chance that came our way over the past — was given to us, pardon me, over the past two years through this newest Army contract, the process was identical. The product wasn't the starting point. Understanding the concept of operations and the use cases came first, and then really working out, alright, what can put your situation in a place where we help make you uncompetitive? That, I believe, is what sets us apart. Beyond that, we possess 25 years of experience, which lets us maintain a complete product line. That means we can genuinely draw on it and deliver those kinds of products, pardon me, along with services. So ultimately, it comes down to our people. I dislike saying it since it sounds like such a stock response, yet that is how we apply the remarkable talent within the company so that we stand apart.

Cameron Chell executive
#34

I really do believe that having production located across not just two borders is a major point of differentiation for us, since that Canadian market has become an enormous opportunity. So that's fairly distinctive too. And ultimately, what I think will establish a lasting market share for us over the coming three years — strategically, we're entirely focused on creating Blue Ocean opportunities. So there are quite a few companies, and many more are on the way, that are pursuing that sort of Mavic 3 replacement, the small ISR drone, which is a lucrative market at present. But in the end, that market, in our view, based on what we've observed over the years, is one that will keep getting eroded. There are multiple players chasing it. At this moment, they're $30,000. A year from now, they'll be $20,000. 18 months from now, they're going to be $4,000 drones again. And perhaps the comps out there will concur with me on that. And then the risk is actually that there are others. Everyone believes that DJI came in and came to dominate the market. Well, we have to keep in mind that the North American market was being dominated by multiple foreign manufacturers, primarily out of Asia.

Cameron Chell executive
#35

And absent DJI, another one of those companies would have essentially wiped the rest of us out across North America. The thing is, DJI performed so well that it managed to beat those competitors too. Now, many of those competitors came from nations capable of making NDAA compliant goods. So my prediction would be that several years down the road, we'll be seeing Eastern Europeans, we'll be seeing Southeast Asians, showing up in that small competitive ISR prosumer segment, once again offering NDAA product. Right now, we have roughly a three- to five-year window in which that won't yet be true, but that also hasn't been a reason for us to place real focus on that specific product line. When you look at the remaining five products in our portfolio, they more or less bypass that area. We do have certain strategic alliances and the like in that space, allowing us to serve our customers there, but it simply isn't a segment of the market where North American manufacturers have struck us as being especially successful.

Cameron Chell executive
#36

So the market right now is quite different, and I might be entirely off base about it. Even so, when we enter a market such as the border, we're developing a border solution, and we believe we've set up a really distinctive situation in which we have an addressable TAM where it will be extremely hard for others to compete, given the work we do that leaves our customers so uncompetitive. So whether we're talking about that specific product, the embedded hybrid manufacturing product, or any number of the others we either already offer and/or will be announcing, we prefer to create Blue Ocean opportunities. That gives us these pockets or hives of burgeoning high-margin business that are closely attuned, custom, and ideal for the products we make, and that's a multi-billion-dollar sales funnel, certainly across the years ahead. And so we don't necessarily need to say, "Hey, let's go build the typical drone," and have to rank as the number one or the number two player. Even though we're a small company at present, we are the number one or number two player in the markets we are addressing, and those are large total addressable markets. So with that said, I'm going to wrap up the call.

Cameron Chell executive
#37

Rolly, I really appreciate everything you do. I know I hear a great deal of feedback from shareholders about how candid you are, how hard you work — you're 24/7. And I encourage anybody that if you've got questions or anything that you need help with to reach out to Rolly. He also has the rest of the organization standing behind him in order to be of greatest service that we can be to our shareholders, all of which none of this would be possible. And then finally, just to our team members and to our employees, you're the most important thing that we have going out there. And that ethos of helping make our customers completely uncompetitive is the ethos that certainly keeps my passion going. And I see you guys executing that every single day with customers in ways just going deeper for them than I've seen across many, many organizations I've been lucky enough to be a part of over the last 35, 40 years of entrepreneurship. So I couldn't be more proud. Thank you so much, everybody, for being here. And reach out if you have any questions.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Draganfly Inc. transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to Draganfly Inc. earnings transcripts and 132,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.