Eltek Ltd. (ELTK) Earnings Call Transcript
March 9, 2026
Earnings Call Speaker Segments
Thank you. Good morning, and thanks for being with us on our 2025 annual earnings call. Ron Freund, our Chief Financial Officer, is here alongside me. We'll kick things off with an overview of the business and a summary of the main factors shaping the results for 2025. Once our prepared remarks are done, we'll gladly take whatever questions you have. By this point, everyone ought to have the press release, which came out earlier today. It's also posted on our website. Revenue for 2025 came to $51.8 million, an 11% rise over 2024. That growth shows the company's strategic accelerated investment plan starting to bear fruit, though it hasn't reached its full potential yet. I'll go into more detail on this in a moment. I will elaborate on this shortly. Over the course of the year, we ran into a number of operational difficulties, among them moving machinery and production lines around inside the facility to get ready for the new plating lines to be installed, trouble hiring workers, difficulty holding onto highly experienced staff, and a sizable drop in the US dollar exchange rate, which hurt the dollar-denominated profitability we report by roughly $2.2 million relative to 2024 profitability. I'll now go through each of these areas more thoroughly. As I mentioned, we ended the year with revenue nearing $52 million. When we signed off on the accelerated investment plan, Eltek was bringing in average annual revenue of about $37 million. The revenue growth since then reflects robust demand for the company's products, together with the considerable investment in machinery and equipment made over the past few years. As we've said before, we're aiming for annual revenue installed capacity at the current plant of $60 million-$65 million at current market prices. During the year, we ran into significant operational constraints that hurt our ability to hit customers' delivery schedules. That situation, paired with demand outpacing domestic production capacity in Israel, brought more competition from overseas players looking to grab a piece of the local demand. We keep seeing strong demand for our products, including from international customers, driven by limited manufacturing capability in the Western countries. We're steadily getting better at delivery performance for our domestic customers, recognizing that many Western countries, including Israel, want to preserve local manufacturing capability. At the same time, we're actively growing our presence in overseas markets, especially the United States, to boost order volume from these regions. Turning to operations. We're making steady headway on our investment program. The core component expected to drive meaningful improvement in output and quality are the two new plating lines. While they don't account for most of the accelerated investment budget in financial terms, their effect on production is highly significant. The first line arrived at the facility at the beginning of 2026, and it's currently in the assembly phase, which was interrupted by the current tension situation in Israel. We continue to hope that the conflict now underway won't cause additional postponement of getting the installation finished. Once that installation is done, a thorough qualification effort will be needed so the lines can be certified across our entire product portfolio. Over the years, we've also dealt with the necessity of hiring more staff, especially engineers, to back the enlarged base of machinery and equipment, and to handle the operational intricacies brought about by shifting production lines and the consequent effects on continuing manufacturing; on top of that, we saw several highly regarded employees leave, retirements among them. These operational difficulties held back overall efficiency. We keep moving forward with the effort to bring in foreign workers from overseas to bolster the workforce we need as the company grows. Lastly, the weakening of the US dollar leads to a rise of roughly $2.2 million reported in NIS-denominated expenses relative to 2024, which hurts both gross and operational profits. It's worth noting that a portion of our present backlog was priced according to a higher exchange rate. The margin on those orders will stay under what was originally expected when the quotations were made. In spite of these difficulties, we stay confident about the company's business and about our capacity to get back to healthy profitability levels once the investment program is finished, the new plating lines are installed, and production stabilizes. Consistent with this long-term dedication, we prolonged the lease agreement for our manufacturing facility until the close of 2039. Under this extension, we got a payment meant to partly offset the company's investment in the facility. That sum will be amortized across the lease terms and will slightly lower annual rent, rental expenses. I'll now hand the call over to Ron Freund, our CFO, to go over our financial results.
Thank you, Eli. I want to direct your focus toward the financial statements covering the year that closed on December 31st, 2025, along with those for 2025's fourth quarter. Also during this call, I'll touch on several non-GAAP financial measures. For non-GAAP financial performance measurement purposes, Eltek relies on EBITDA. Its definition, plus why we use it, can be found in our earnings release. Now I'll walk through the key points from 2025. Every figure I cite is denominated in US dollars. Revenue for the year that ended December 31st, 2025, came to $51.8 million, versus $46.6 million during 2024. We posted gross profit of $8 million, against $10.3 million during 2024. Gross margin stood at 15%, against 22% during 2024. That drop in both gross profit and gross margin stemmed mainly from NIS-denominated expenses climbing because the US dollar weakened over the course of 2025, together with lower production efficiency. Operating profit reached $2.3 million during 2025, versus $4.4 million during 2024. During 2025, financial expenses of $1.3 million were recorded, versus financial income of $0.7 million during 2024. That swing came about mainly because the US dollar lost value relative to the NIS. Net profit came to $0.8 million, or $0.12 per share, during 2025, versus a net profit of $4.2 million, or $0.63 per share, during 2024. EBITDA came in at $4.5 million during 2025, versus $5.9 million during 2024. Over the course of 2025, cash flow from operating activities was positive, reaching $0.6 million, versus $4.5 million during 2024. At December 31st, 2025, our cash and cash equivalents plus short-term bank deposits together came to $12.1 million. Now I'll walk through the key points from 2025's fourth quarter, setting them against 2024's fourth quarter. Revenue for 2025's fourth quarter reached $13.2 million, versus $10.8 million during 2024's fourth quarter. Gross profit for 2025's fourth quarter came to $1.2 million, versus $1.9 million during 2024's fourth quarter. For 2025's fourth quarter, net loss was $0.3 million, or $0.05 per share, versus a net profit of $23,000 during 2024's fourth quarter. EBITDA for 2025's fourth quarter was $0.7 million, versus $0.8 million during 2024's fourth quarter. We're now ready to take your questions.
Hey, everyone. First thing I want to ask about — the gross margin this quarter came in really weak, around 9%, if my math is right. At what point do you anticipate seeing this figure get better? Revenue looked fairly decent, yet the gross margin was extremely low. What's your read on where things stand?
Hello, Mark. Just like we said in earlier reports, we anticipated wrapping up the integration and installation of the new plating line — it showed up at the start of 2026 — by the middle of 2026. That line should streamline our core manufacturing processes and boost production capacity. Once the installation is finished, we'll kick off the qualification process, and that's anticipated to run through the rest of 2026. Over that stretch, our plan is to qualify product families and, on a gradual basis, allow the production to shift in phases onto the new line, until we reach full compliance and complete qualification across all company products; we also anticipate that by then our production process will have stabilized. This ought to help bring the gross margin up. Like we've mentioned before, every extra dollar of revenue adds meaningfully to gross profit and, naturally, to net income. So to answer you directly: growing our sales volume should deliver a sizable favorable effect on profitability and lift the gross margin.
Yes, Eli, I’m trying to get my head around the fact that even earlier, when your gross margins were 27%-29%, and now—I get the dollar circumstances and all that—why has there been such a steep decline in margins even at this point, before those lines have been put in?
Mark, hello, this is Roni. During the first quarter, as you’re aware, the US dollar kept depreciating, and that led to a substantial extra Nis report, causing expenses denominated in NIS to rise when converted into dollar-reported figures. Also, as you know, just like in earlier quarters, we’re dealing with production efficiency problems, and we anticipate that, as Eli mentioned before, once we reach higher sales volume, a gross margin will go back to its earlier positive levels.
All right. Could you two discuss the way prices are behaving a bit? This USD decline was visible to everybody, but earlier today I also joined the PCB call, and they told us that they're now lifting their prices in order to compensate for that decline, so as to, you know, get back to a typical gross margin. What's your read on how pricing will move from here?
Where pricing is concerned, our pricing system gets updated right away so that it captures both the fresh depreciation and the fresh US dollar exchange rate. Like I said earlier, quotations are already in motion that were built on long-term proposals, which in turn were built on a US dollar to NIS ratio that sits above where it is now, and that proposal will come our way. Those purchase orders will arrive, and a portion of our basket down the road is going to fall short of the volume our proposals anticipate at present.
Mark, it's not solely about quotes. We've genuinely had orders placed and taken in at a higher dollar rate. On those orders, we're anticipating a margin that's lower than what we'd expected for fresh orders coming in over the coming months.
Naturally, that makes sense. So then, assuming those orders get recalculated according to the updated dollar-shekel rate, at what point should we anticipate some benefit from that change? Will it show up next quarter, in Q1, or in Q2?
Well, as we've mentioned previously, our backlog typically runs one to two quarters, and we didn't hold off until this call; our pricing system has already been updated. My guess is it'll take roughly four to five months before we start seeing some pickup.
Got it. All right. I figured you'd already revised it earlier too, since the issues actually started back in Q3.
Yes, that's true. As happened during Q4, the depreciation carried on-
Yeah, I get it.
... we needed to revise it once more.
Got it. Got it. All right. All right. That’s all I wanted to ask.
Thanks, Mark.
Thanks.
To wrap up, I'd like to express appreciation to those who invest with us for standing behind the company and believing in it. Having you represent us over the long term, along with your faith in what we're doing, makes it possible for us to keep putting money into what we're capable of and chase the goals we've set for growing. I'd also like to acknowledge how devoted our team members have been. The skill they bring, how well they adjust, and the hard work they've shown during this time have been essential for keeping things running and pushing our strategic plans forward. We appreciate you being here with us today. Enjoy the rest of your day.
That brings us to the end of the conference call on Eltek Ltd.'s 2025 financial results. We appreciate everyone for joining. You are welcome to disconnect now.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Eltek Ltd. transcript - plus 131,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Eltek Ltd. earnings transcripts and 131,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.