Finolex Industries Limited (FINPIPE) Earnings Call Transcript
February 2, 2021
Earnings Call Speaker Segments
Ladies and gentlemen, good day, and welcome to the Q3 FY '21 Earnings Conference Call of Finolex Industries Limited hosted by Investec Capital Services. [Operator Instructions] Please note that this conference is being recorded. I now hand the conference over to Mr. Ritesh Shah from Investec Capital. Thank you, and over to you, sir.
Thank you, Margaret. Thank you all for joining Finolex Q3 FY '21 Results Con Call. We have with us Mr. Sanjay Math, Managing Director; and Mr. Anil Whabi, Director of Finance and CFO; and Mr. Niraj Kedia, Deputy CFO from Finolex Industries. Thanking management for offering us the opportunity to host this call. I'll hand over the call to management for opening remarks, post which we'll have a Q&A session. Over to you, sir. Thank you so much.
Thank you, Ritesh. Good morning, ladies and gentlemen. I heartily, heartily welcome you all for this conference call for Finolex Industries for quarter 3 of year 2021. Hope you all are safe. We thank you for your continued interest in Finolex Industries Limited, and we are happy to talk to you about the third quarter results of this third quarter results of 2021. During this quarter, higher volumes and better realizations have resulted with significant improvement in all our operating parameters. During the quarter, PVC prices touched historic high on account of various reasons, which resulted in better realization. Let me give you some of the performance indicators for the quarter 3 of financial year 2021. Total revenue rose by 52.5% to INR 1,067 crores, which is also a substantial increase compared to quarter 2 2021. EBITDA rose by 150% to INR 346.66 crores from INR 138.96 crores against last year. EBIT margins -- or EBIT increased by 172% to INR 326.81 crores from INR 120.20 crores. Profit after tax rose by 174% to INR 255.86 crores from INR 93.32 crores versus last year's. For the segmental performance, EBIT for the resin segment was 35.5% against 20.1% last year, and EBIT for pipes and fitting segment was 12.6% against 7.9% last year. We continue to be net debt-free company, with a net cash surplus as at 31st of December '20, I think these are the results which are substantially higher results than the second quarter as well as in the COVID situation. This is a substantially higher result that we see. Let me leave this floor open for questions, and we'll be happy to answer your questions.
[Operator Instructions] The first question is from the line of Bhargav from Kotak Mutual Fund.
Congrats for the very good performance. Sir, my first question is on the PVC prices. As you mentioned, that PVC prices were sort of at historic high levels in the third quarter. So just wanted to have your views in terms of what are your expectations in terms of PVC prices going forward, especially given that in China, the PVC prices have already started correcting since December. And also wanted to sort of know your views in terms of does the Indian prices on PVC have any correlation with the movements in the Chinese PVC prices. That's my first question.
PVC prices have gone up to USD 1,400. Presently, they are running around USD 1,350. There has been some correction, but they are still holding at that level. Yesterday, the Formosa has also given a $20 increase. [ The land ] has also maintained the rollover of the prices. We see that the prices remaining at this level for some more time to come. This is, again, because the international prices are still not softening out. In almost all regions, whether it is North America, whether it is Europe or it is in Asia Pacific, they are holding at this level all across. And that is how a pricing structure may remain maybe for this quarter also at this level.
Understood. Secondly, sir, we've seen volumes in your pipe business sort of being a bit muted when compared to other players in the industry. So is it that on the agri side, especially, there is some softness because of the higher prices? And do you think that once the prices start correcting possibly on the volume front, you can -- your recovery maybe around March or maybe around April when the downward trend starts?
I think let me put you in this -- when we, this year, particularly started with COVID. In the first quarter, we were about minus 40%. In the second quarter, we were minus 9%. This quarter, we are plus 5%. Going like this, I think quarter 4, we should see substantial growth. This is what we see. The momentum is there. And we expect that the pipe market opens up further after the budget. So there is some indications that there is Nal se Jal and Swachh Bharat, there has been big allocations that have been given by the new budget. So possibly, this -- both these areas, particularly the real estate sector and agri sector also should be opening up now the winter is closing out and summer is coming up. So we see that the market should give a better quarter 4 results, and the momentum will be there.
And sir, my last question is on capital allocation. Given such strong performance and net cash balance sheet, what is the plan going forward on capital allocation? Are we looking at being aggressive on the CPVC side and maybe use our balance sheet more to sort of grow that business? Or are we looking at any new CapEx or possibly we'll sort of give out a dividend?
Anil, can you answer on this?
See, this year, we have not expanded any capacity in the pipe segment. But going forward, we will have, in next year, the routine expansion that we do in a modular fashion. And in CPVC, right now, we have enough capacity. So we don't need to increase any further right now. But yes, we will continue to be aggressive in the CPVC market.
The next question is from the line of Kumar Saumya from Systematix.
Sir, my first question was regarding the PVC/EDC prices during the third quarter.
See, prices average we can give for the third quarter: PVC price, $1,235; EDC price, $470; and PVC/EDC delta for quarter 3 was $765; PVC/VCM delta, $275.
And sir, this was against $650 in the last quarter. So sequentially, we have seen substantial rise in the spread. But sir, the gross margin seems to have gone down.
Q2 was -- PVC/EDC delta was $654, yes.
Yes. So as I said, gross margin has come down from 46% to 45%. So if you could highlight that, what is the reason behind that despite still improving the gross margin [indiscernible].
In absolute terms, it has improved.
Yes, sir. As a percentage of sales, it is marginally down [ INR 100 ].
The percentage, it has to because the selling prices have moved up very sharply.
Okay. Okay. And just the PVC volumes and sales number for this quarter.
In CPVC, we did about 3,000 -- 3,004 tonnes in CPVC.
The revenue that we booked from that, sir?
Revenue was INR 91.5 crores.
The next question is from the line of Sonali Salgaonkar from Jefferies India.
Sir, congratulations on a great set of numbers. Sir, my first question is regarding the pipe's EBIT margin. Now consistently over the past 4 quarters, we have seen a year-on-year expansion in here. So definitely, what could be the fundamental drivers for this? So I understand the PVC's sharp rise, but over the past 4 quarters, there's been something -- is, especially, I think, changing fundamentally. So if you could highlight on that, please.
See, basically, if you see in the past few quarters, there has been an improvement, which is because of the better realization. Slowly, if you see, we have been talking about this. So margins have inched up. But if we talk of the Q3, it is a combination of inventory gain as well as better realizations compared to last year.
I understand. Sir, could we quantify the inventory gain, please?
Inventory gain is difficult to quantify. But yes, there would be a large part of it because the PVC prices and the pipe's prices in turn moved up very sharply in a very short period of time.
Correct. Sir, my second question is regarding your mix. So current mix is, I believe, 70-30 on agri versus real estate. So how do you envisage it going forward? I mean in the past few calls, you mentioned that you want to increase your plumbing to about 40% over the next 3, 5 years. Where are we on that part?
I think we are still maintaining that we are trying to focus on non-agri. We have been leaders in agri anyway. But going ahead, we are also making efforts to get into non-agri business. And as we said last time, we want to increase our product basket as well as reach at various geographies. So these are some of the things that we are doing. At the same time, we are focusing independently on routines as well as on individual verticals of non-agri business.
Understand. Sir, and what is the current spread right now at these levels?
What do you mean by that?
Sir, the PVC to EDC spread right now.
Right now, also, it is maintaining $765 PVC to EDC. EDC at present is $1,350, as I was telling earlier also. PVC is $585. And the spread between PVC/EDC is still running at $765. PVC to VCM, a little bit contracted from $275 to $230.
Understand. Sir, last question, what was the spread in Q3 FY '20?
FY '20...
FY '20 was $589.
Understood. Understand. Sir, and CPVC numbers, volumes and revenue in Q3 FY '20?
Q3 -- just a second.
2,000 tonnes last year, I think.
Yes, 2,000 -- almost 2,500 tonnes.
2,500, yes.
And revenue was INR 34 crores.
CPVC has grown by 20% year-on-year.
The next question is from the line of Sneha Talreja from Edelweiss.
Sir, many congratulations on very great set of numbers. so two questions from my end. Firstly, related to demand scenario. Are you seeing a lot of consolidation happening in this industry that is why we are able to grow the volume? Or in general, you feel that there was some pent-up demand, which is leading to this kind of a healthy growth in terms of volumes? Why I would call still healthy is because, I mean, we are majorly into agri price and with the sharp kind of a price hike that we have seen, we are still able to record volume growth. So just wanted to know your view on the same. And how do you see the trend going forward? Are you still expecting the demand will continue to remain healthy because we will be entering the agri season and given that PVC prices still continue to remain at elevated level?
At least the prices will remain stronger by this Q4, but this is not sustainable. It is going to go down. So there will be cooling down. Demand from the agri sector possibly has a backlash at this pricing. But real estate demand need not have this type of a contraction as the cost of construction and the contribution of piping system is very small, 2% to 3%. So increase in pricing of piping may not be affecting that cost. So we see that maybe real estate sector will not have a backlash on high pricing. Agri sector possibly is same, but this year also, the monsoon was delayed. I think agri sector has not yet opened fully. So we can't say like is that -- there is -- at this price level, whether the demand will really contract. We are still hopeful that Q4 will be better than Q3. And so we have made about 5% growth. Even agri was growing at 4.5%, and non-agri grew at about 5.7%. So our total growth was nearly about 5%. We will be seeing a growth in Q4, possibly much bigger, and we are hopeful that it will maintain last year's numbers.
Sure, sir. And any comments on consolidation?
Hello? Hello?
Hello?
Yes?
Sir, I was just asking, any comments on consolidation? Are you seeing that still happening? Or do you think after COVID, these guys are now settled and they are back to routine business activity, I mean, the very smaller players?
Consolidation from unorganized to organized is a question mark which we debate every time. There is very little data available that how much unorganized sector is a consolidated -- or getting consolidated into organized sector. We don't see that numbers very authentically. Can't comment on this very, very confidently on this that there is consolidation happening from unorganized to organized.
Sure, sir. Sir, my second question is an extension to previous participant's question. So we definitely aim to increase our mix -- product mix towards real estate. And you, of course, have mentioned that you want to increase the product market as well as the reach. Commenting on reach, any particular numbers that you would like to highlight that our retail touch points have reached so and so? And what is the rural and urban mix as of today?
I think we have now the total retail fund is about 21,000, from 18,000 to 21,000. So there is an increase of retail touch points. Mostly, we are now trying to look at geographies of north and east. So these are some of the areas where we are weaker earlier, and we are concentrating on those areas. We are very strong on south as well as on west maybe because we are closer in the west -- western region for our manufacturing setups. And that is why we are now looking at those 2 areas where we are weak, and we are building up our concentration on those areas.
Sure. Sir, this 21,000 is an updated number because last quarter also, we've got similar numbers on the distribution front.
Yes. It is actually close to 21,000, yes.
The next question comes from the line of Maulik Patel from Equirus Securities.
Sir, a few questions. Sir, can you highlight what's happening with the carbide route in China? Is that market open?
Carbide is -- PVC was stopped by China earlier because of the environmental concerns. And that has definitely been opened since last year. I cannot know how they have revised that decision of environmental concerns and opened up, but yes, it is opened up. Possibly, the reason could be that intra-region trade also has fallen. And China was the one which recovered faster than the other countries after the pandemic. And so when the intra-region trade also was not there and PVC availability was a question mark, I think they might have opened up on carbide. This is our guess on that particular sector, and there is hardly anything that is moving out of China to the other regions, that it is affecting high structure in other areas. Maybe that is internal China PVC demand, which is being met through the carbide growth.
Okay. Sir, second question on the similar thought. In earlier conference call, you guide -- you mentioned that a few of the plants like Formosa and few others were shut down for maintenance or unscheduled maintenance shutdown. Have they come back on the stream? Or they are still not producing at a full capacity?
I think they are coming back on the stream by December. There is definitely more availability of PVC coming in the U.S. Fortunately, from the European Union, there is hardly any trade that is going on. European Union is almost locked out for external trade. I think they are only working on the internal trade. Asia Pacific, yes, it is definitely opening up further. And the recovery is faster than Europe as well as U.S. because the pandemic situation is under control in Asia Pacific.
Sir, you mentioned that in one of the earlier call, an earlier EBIT question. Was that current PVC/EDC spread is around $750, right?
Current PVC?
Price.
PVC minus EDC spread, $750.
PVC minus EDC spread is $765.
Yes. This includes the import duty protection, what we have in India, right? 10% import duty on PVC and 0% on EDC, right?
No, this not included. These are all IHS or ICIS numbers.
Okay. Okay. I got it. I got it. So this -- so on top of that, there will be a 10% import duty protection, but we will have to adjust that.
Exactly. So there will be different duties from different places, okay? There are certain countries which do not have duties, and certain countries have more duties, right? Accordingly, it will be there and the prices are adjusted by those countries who are exporting to India. ICIS are finally having good parity between them.
Okay. Got it. Sir, in your own assessment, what could have been in a decline in the PVC consumption for the first 9 months? And I understand that because of the various concerns, the pandemic, the lockdown and then the availability of the cargoes within and then the price also. But what could have been a decline in the PVC consumption in the country?
We see consumption in the country, the demand is there and that is being met by the domestic players to the extent they are all running at full load. There is only contraction of import volumes, and that is where there is a shortage of PVC. And there was definitely from the list price also, there are a lot of trades that are going on where the prices were shooting up.
So sir, I understand that there is a large secondary market in terms of trader sales to the small manufacturers. And that was -- they were buying the small manufacturers, which do not have a capability to import the cargoes on their own. And they were buying the PVC at around INR 10 premium to the realized price is a month on month -- 1 month or [ double bag ]. Has that situation been reduced? Or I think there's still -- there is a shortage in the secondary market.
I don't think that the situation has -- it has definitely softened out. And that volatility was there where the traders were taking advantage, I think that has reduced a lot. Presently, the markets are more or less at the least prices, matching the international prices.
Okay. So right now, there is no growth, there is no cash premium. It was better in [ November back ] or 2 months back.
Yes.
Okay. Sir, the last question, if you allow me. Has there been any -- Finolex has made a significant investment for -- to grow our non-agri business. We've been talking about since last, I think, say 1 year since I've been tracking this company. And it's only the last 2 years or 3 years we made a -- we see -- we saw substantial investment in terms of either the credit to the distributors or the number of SKUs, what we have, or times of support, which we provide to the distributors and understanding of the market. So what, in your assessment, what do you think the next step for us to increase our non-agri volume further? I mean do you think that whatever you have done is sufficient enough? Or in your view, are there still some steps which are missing, and you want to implement or you are implementing right now?
I think there is nothing like complacency in any of the businesses. We are -- when we have decided that we will be trying to increase our focus on non-agri and increase our market size, yes, we are definitely looking at increasing product profiles as well as our geographical reach. Both areas, we are definitely going aggressively. I think you have to give some time, 2 to 3 years' time, for any visible change that we can see. And for example, we were somewhere around 26%, 74% earlier. Today, we are now running about 30%, 70%. If you see that in quarter 2, we were 38% to 62%. Agri was low. So our growth rate in non-agri is maintaining continuously over the last years. PVC, particularly this time, we have grown by 20% over last year this quarter.
Sir, and you mentioned about this geographical expansion, right, in your [indiscernible]. Sir, do you think that, as a company, we have 3 plants. All are in the west part of the country, one in Pune, one in Ratnagiri and one in [ Bharat ]. Do we think that it is difficult or it will be more important for us to set up in a plant on the east or the south side of the country, where the substantial part of the demand is there? Or particularly the demand is coming up very fast or the competitors are also putting up a plant there? Do you have such kind of a plan or the reason that we want to set up a plant in other parts of the country?
I think when every plant requires some critical mass of the market size, and we are evaluating that. When we reach somewhere around 20,000-plus on a market size for east, we will definitely look at that proposition. And we are already thinking about it. So it is not that we will never do anything on that. Whether it will be make or buy, maybe we have subcontractors or we have a different model of making product available to us. So these are some of the things which we'll be thinking.
[Operator Instructions] The next question is from the line of Ritesh Shah from Investec Capital.
Sir, you indicated agri growth at 4.5% and non-agri at 5.7%. Sir, would it be possible for you to comment on the industry growth numbers? Just wanted to have a sense on market share gain or loss. Either on a Q3 basis or 9-month basis will also do fine.
We don't have the numbers for other competitors or in the industry as a sector. And do you very authentically what others have done and what we have done.
Sir, any sense on PVC consumption basis at India level on 9-month basis, if that's probably acts as a broader proxy, not exactly apple-to-apple comparison, though?
Yes, numbers -- the domestic production itself is about 1 lakh, 10,000 tonnes. And the imports were somewhere around 70,000 to 80,000 tonnes. So you can say some -- we are still maintaining about 2 lakh tonnes every month.
Okay. Sir, my second question is you did indicate about the distribution number being at 21,000. I think a couple of quarters back, you had indicated the same number at 18,000. Do you have a sense on where this additional 3,000 have come in from? And is it for a particular segment that we are looking at on the non-agri side?
I think most of these additions are in non-agri side only.
Correct. My question is, is it like the more we are focusing on tier 1, tier 2, where is this additional 3,000 distributors being posted?
I think in north as well as in east, the market is more on the urban sector, not on rural sector. Rural sector is for agri pipes, and urban sector is for the real estate piping. We are more or less focusing on the urban sector.
On north and east, right? That's what you said.
Yes.
Okay. Sir, in the earlier call, you had indicated about basically 40% non-agri, and you had also spoken about the variable component being implemented for the marketing people. Sir, any update over here on the variable component in salaries so that there could be probably more [ aggression ] on volume push on the non-agri side?
I didn't get you. What is variable component?
Sir, so whatever understanding is for Finolex is the marketing people, they don't have a variable component unlike the [ PSA ]. So there was a thought or comment earlier in one of the calls that this is something that we were looking at which will motivate the marketing people better, and it will help on the volume growth as well. Sir, so any update on here?
These are compensation models, and we have certain different ways of compensating our own people.
Okay. So no basically, right?
No.
Okay And just last question. Sir, given the prices have been quite volatile, PVC, EDC, VCM, what is our philosophy on maintaining the inventory levels? And if you could give broad ballpark numbers on how much is the volume inventory and, if possible, the average cost of EDC, including this year, end of quarter, that would be very useful.
Anil, do you have the numbers?
Ritesh, see, inventory policy, as we have been saying, always saying, these imported materials, we always stock for 2 months, irrespective of their prices. So we continue to follow that.
Okay. And sir, how much will be the average costing end of the quarter? Is that possible? Just help us understand what sort of inventory gains...
Yes, correct. So the average, as I said, for EDC and the Q3 prices were at around $470. So that would be the cost that we would be carrying inventory at, roughly, roughly.
Okay. So one can assume November, December average. Would that be a fair assumption?
Yes. Yes, of course.
The next question is from the line of [indiscernible] from SUD Life Insurance.
Yes. I just want one clarification. So sir, as you told that you are still hopeful that Q4 will be better than Q3. So just wanted to clarify here that do you say this in terms of, let's say, volume growth, value growth or absolute number or the percentage growth as such?
It will be both volume as well as revenue.
Okay. So absolute will be higher than Q3. Am I correct?
Yes, sir.
This is because of our expectation that the markets will open up now. With the agri season now coming in, the market should open up. So if that happens, yes, we will do good volumes.
The next question is from the line of Achal Lohade from JM Financial.
Yes. Congratulations for the great performance. My first question is with respect to PVC rating. You mentioned about 200,000 tonnes per month consumption. How much would be roughly for the plastic pipe according to you, sir?
Normally, if you see PVC application segments, 70% growth in pipes and fittings. And all others like profiles or films, animation and toys and other things. So that will be every application is about 4% to 5%. So there is no major application there apart from pipes and fittings.
Right. And this 200,000 tonnes per month, is it the recent month? Is it the average for the last 9 months? Or can you elaborate if you have for the first 9 months, cumulatively, what is the number?
First quarter, second quarter, it was just taking off. So those numbers are definitely poor. Nowadays, in this quarter 3 is around 200,000. Definitely it will go further in quarter 4.
Right. Is there any capacity increase happening in the domestic market according to you? And in terms of our thought process, would we also look at capacity additions in the resin segment, sir?
You are talking about resin or you are talking pipes?
Resins, resins.
Resin, at present, there are definitely plans for various companies. [ Clients ] has a plan and plus has a plan. I think even we have a plan there. It all depends upon how the feedstocks are available, and they are sustainably available. Not necessary that they are available today, but over a period of 10 to 15 years, if we have contractual arrangements for feedstock, then only the projects can take off. We are in the world of feedstocks. I think that is the major concern for -- there's no sizable buildup that has happened in PVC. There have been talks coming from Department of Chemical and Petrochemical (sic) [ Department of Chemicals and Petrochemicals ] that there will be PCPIRs, who will be the mother plant to feed the feedstocks to the downstream industries for PVC [indiscernible]. This has yet to take off. And possibly, there are [indiscernible] type of [ grams ]. We definitely see that the PCPIRs are given priority.
Understood. In terms of the -- you said there are gaps in terms of the product offering in the non-agri side. Is it possible to elaborate a bit in terms of which segment -- subsegment, so to say, in the non-agri, which is kind of missing at the moment and what sort of time line you would have in mind to bridge that?
In CPVC and SWR, these are the 2 major growth areas for us. And although plumbing also is there, but these 2 areas are faster growing, and we are providing more SKUs in this area.
Okay. Okay. And as of now, how much of the volume -- is there any volume which is subcontracted? And you mentioned about the east region. You could look at make or versus buy decision. So I just thought of understanding what is it currently and what sort of time line one could look at for the plant in the eastern or the northern region.
Anil, can we have some numbers on this?
No. Currently, there is nothing on horizon right now as we need to expand capacity later. Maybe at some point of time, see, immediate expansions will happen at the existing locations only.
And how much can we expand? Like 40%, 50%, you can double actually practically.
It takes 2 years. Whatever we need to add can be added into existing locations.
For next 2 years, you think?
Yes.
Understood. And just last question, if I may. In terms of what is the kind of long-term sustainable margin one should look at for the resin business. I know quarterly, it is extremely volatile. But if we were to look at the longer-term average, what kind of number one should kind of look at for the resins business and the plastic pipes business, sir?
It is difficult to say. If you have looked at it in the past, 15%, 16% has been the normal margin in the PVC segment. And in better times, it does much better; and in worst times, it is lower, going to 8%, 9%. So it is difficult to say that what would be the sustainable margin.
So 15%, 16% you mentioned for resins or the...
Resins, resins, resins.
And what about plastic pipes, sir?
Normally, plumbing pipe is relatively stable. If you have seen, 8% to 9% we have been doing.
Right. But the mix, surely, further improve the margin? Or you think that is...
Normally it should. It should. It will not dramatically change, but slowly, it should.
The next question is from the line of [ Richard Jain ] from [ ANX ].
Most of our questions have been answered. I just need a few data points. So if you could give the CapEx that we've done for 9 months FY '21 and what kind of CapEx numbers are we planning to do in FY '22. And if you could also give the cash position as on December 31 and the receivables, sir.
See, on net debt basis, we were plus by INR 500 crores plus on cash. And if we talk of CapEx, the plan this year was around INR 100 crores. So we should be ending the year with less than INR 100 crores. And from next year, the normal CapEx, which we do, is about INR 150 crores a year, which includes the replacement assets also in both the segments. So for next year, it should be around somewhere between INR 150 to INR 200. The plans are yet to be frozen.
Okay. Understood, sir. And the receivable number that you could give.
Receivables.
So we had around INR 200 crores of receivables on December.
Okay. Okay. And so a few more data points, if you could give me the agri versus non-agri growth in terms of sales and volumes in Q3 FY '21 versus FY '20 of Q3.
I think we mentioned just a few minutes back.
Yes. I think I missed that number, so sorry.
So in agri, it was...
4.53 in agri and non-agri, 5.14. Total about 4.7.
Okay. So these are the same number, right, not the volume.
Sales volume number.
Volume number.
These are the volume numbers. Okay. Okay. Can we also have the breakup in terms of the sales revenue, sir?
It's very robust. I don't have it.
The next question is from the line of Ankit Gor from Systematix.
So just to carry on CapEx side, how far we are from that critical mass of 20,000-tonne to set a plant in north, for example, or to have an alternative plant in a make-or-buy strategy? How close or how far we are, sir, from that number?
Yes. We kept the plant, which we set up in Masar and Gujarat. It was basically to cater to the markets in north. So whatever capacity we have set up there, we would like to see that, that is used to the optimum level. And then we would look at anything further.
Okay. And similarly, east, are we at a substantially good number, still, let's say, 10,000, 15,000? Or we are still far away there in east?
Still far away.
Still far away.
Around 10,000 even.
Okay. Okay. And sir, if we really see on a PVC Resin side, if we have to do some CapEx there, as sir mentioned, will it be brownfield at Ratnagiri? Or are we thinking about greenfield plant of resin? How will you see that, sir, probably a year, 2 year down the line?
Regarding PVC Resin you are talking?
Yes, sir. You talked about some expansion there, evaluating some expenses.
We have already a technology and MOU done for the plant, but we have not been able to tie up on any of the raw material supplies. This will be a brownfield because we have excellent infrastructure. We have our own jetty. We have storages for cryogenic materials. We also have a big land bank there. We have a power plant, and we have our own trained manpower. So if at all, there is resin capacity buildup, which [indiscernible].
Okay. On the pipe side, sir, if we assume that the valuated PVC Resin prices remain elevated even in 1Q FY '22, how do you see impact on our volume or farmer will buy despite higher PVC prices since they have to make their mind for current season? How do we see that, sir?
It is difficult to say. Obviously, there will be impact because for a farmer, it's a large CapEx. So...
Yes. And that would be how much? As sir said, real estate will be relatively lesser. In my assumption, probably 4%, 5%. In any -- for farmers, this would be cost of would be how much, sir, in overall scheme of things?
I didn't get your question exactly. What is your -- farmer?
Sir, you said in real estate, overall pipe cost is relatively lower in real estate.
So what I meant was that the construction cost, say, for example, for any housing sector, is INR 2,500 per square feet. In this, the piping cost required for the construction will be about INR 400 to INR 500. It will be hardly 2% to 3%. And that is where, even if there is an increase in pricing in pipes price, it will be absorbed by the construction cost because it is 2% to 3% only, whereas for a farmer, he has to buy a pipe. It is direct cost to him for the infrastructure cost, input cost.
The next question is from the line of Sonali Salgaonkar from Jefferies India.
Sir, my first question is what would be the volume split of agri versus non-agri for 9 months?
Do you have the number, sir?
I'm sorry. Actually, we lost the line for the other locations. We have reconnected. I would request Sonali to please repeat your question.
Sure. Sir, what was the volume split of agri versus non-agri for 9 months FY '21?
Agri is 116,000 tonnes and non-agri is 46,000.
And the growth in 9 months?
Sorry, Sonali, your question, please?
Sir, what would be the growth -- volume growth in agri versus non-agri for 9 months FY '21?
So 9 months, I don't have that data right now. But obviously, if you consider a 9-month basis, this is lower. There's no growth.
Sure. So my second question is what would be the SKUs in pipes right now?
Our number of SKUs is 2,000 plus.
And of that, how much -- how many in CPVC?
CPVC, about 370. There's one clarification when we just cut off on the previous question. In case of resin, we are not planning any capacity expansion right now. What MD was saying was if it were to happen, then it would definitely happen at Ratnagiri. But right now, we are not considering any expansion in PVC Resin segment.
The next question is from the line of Rajesh Kumar Ravi from HDFC Securities.
Yes. On the CPVC, what is the revenue and volume growth that we have seen in third quarter this year?
In CPVC, we have grown 20.7%.
In terms of?
Volume.
Okay. And value growth?
I think it is about 23%.
23%. Okay. And what is the thought process in terms of the revenue mix of CPVC in your total pipes and fittings versus where we stand today?
CPVC business that we do is very small. We presently do over 10,000 tonnes, and we have a capacity of 20,000 tonnes. We will continue to strive to grow in this. But then in overall business volumes, there is still a very low volume. So it won't make a significant difference in total numbers.
Okay. So in terms of incremental expansions, CPVC, you would see any expansions or you would try to first ramp up the existing capacities?
For CPVC, the extruders are basically same. It is only the barrels crew that we need to change, which we keep on changing in all the extruders. So whenever we need to add capacity, it is not difficult for us to do so.
The next question is from the line of Prateek Bhatnagar from HSBC.
Yes. I have just one. So what we've seen is that your inclined industry globally has been impacted a lot by shutdowns. So the question is what is the risk that we are not able to source our feedstock due to the scarcity or the quantities less? So the question is basically how many suppliers do we have, what is the contractual agreement, what is the options we have if the suppliers are not able to give us in the U.S. or Middle East? So any color there will be helpful.
You're talking about Resin division, right?
Yes. So resin division, the EDC, VCM, ethylene, which we source.
Yes. There is no major buildup of EDC capacity as well as ethylene capacity in the near future in the Middle East or in the Southeast Asia. I think whatever capacities are coming up are on the shale gas basis in U.S. and in China, which is with various types of sources. One is the carbide route for PVC, but for the ethylene route, they are on naphtha. So China is one area where they are building up, but that is for the domestic consumption, and possibly, it is not for the merchant sale. The new capacities, which can come up based on ethylene, will be based on naphtha-based ethylene only because there is no gas available now in Middle East. So naphtha-based ethylene is not competitive against the gas-based ethylene. So presently, I think this whole dynamics of ethylene feedstock is a question mark. At the same time, refining is moving from OTC, it is oil to chemicals, as fuels demand is going and contracting based on the electrical vehicles. Now based on this, if really one has to see how this unfolds and how this is going for petrochemical feedstocks and ethylene becomes available. At present, India doesn't have major ethylene plants that are coming up, there is no plan for a big ethylene setup, which is there in India. And ethylene transport from Middle East or from Asia Pacific. It's a costly affair, and there are no certainties that you have a secured contract on ethylene. That is why we said we have a plant ready, but we don't have any kind of a surety of any feedstock. And that is why we can't do any expansion on resin plant. It will happen only if there is a very sure supply source available for feedstocks. And for EDC, it is ethylene required, given otherwise from EDC route to when we don't have ethylene, we require ethylene for oxy coordination. So it is a smaller quantity. Now getting only VCM and building up a PVC plant, this also is having a limitation that merchant sale for VCM is also restricted. It is not very, very common. Why people will sell VCM if they cannot make their own PVC and sell PVC? Transporting VCM is in a gas form, so it is a costly affair, whereas PVC in a solid form. It's cheaper to transport also and easier and then safe to transport. And so availability of VCM to PVC route, and VCM is in short supply. Secondly, EDC to VCM to PVC, this route also, unless there is EDC available based on ethylene, that is the question mark. And that is why India as a country is short on feedstocks. That is where -- we don't see any growth in India, particularly on EDC to VCM to PVC route.
Right. So the question is on the existing plants, sir. So is there a risk that because of the global shutdowns, we are not able to source the EDC, which you require for existing plants, a risk?
Existing plants, we have long-term contracts. And all those suppliers who are making EDC are tied up with us for long term. That is where we are sustaining on that. Now they are not expanding, so there is no additional EDC that is available in Middle East presently.
The next question is from the line of [ Steven Shao ] from Select Capital.
Yes. Sir, for our CPVC product, what is our market penetration?
See, as I mentioned, our volumes are very low compared to the total volumes that is done in India. Our volume is not even 5%. So that way, the penetration is quite low. We are planning to expand this vertical. But still compared to the volumes that we do or the total volumes of CPVC in the domestic market, it is quite low.
Okay. So out of the total 21,000 distribution network, which we have, what would be the figure for CPVC, sir?
No, no. See, there are a number of retailers who keep -- so there is no specific number as such. All of them keep the CPVC stock also. And CPVC, it is not only in the urban areas. In Tier 2, Tier 3 cities, also, we have seen that there's consumption of CPVC pipes there.
Okay. And sir, other peers are also looking for an opportunity in water tank solution business. So maybe in coming years, we are also looking for that opportunity.
We have been looking at this, but we have not yet decided to go for it.
Any particular reason for that?
No. See, basically, we have to see the visibility of volumes. This necessarily needs the distributed manufacturing model. So, so far, we have not decided to venture into this.
Okay. And sir, of the total, around 4.5% volume growth, which we have seen in pipes and fittings, what is the volume growth in fitting segment?
This year, the fittings volumes have been slightly better. If you see in the past 2 years, slowly the fittings volumes have been rising. So marginally, improvement is there in fittings volume.
I think fittings volume, 7% year-on-year.
Okay. And does this...
Quarter-on-quarter is 14%.
Okay. So this 12% EBIT margin, which was posted in PVC pipes and fittings, you said, currently, it would be around 8% to 9%. So by when you expect this kind of an EBIT margin sustainable?
Sorry?
You said this 12% EBIT margin is not sustainable, right, in PVC pipes and fittings, and you guided for 8% to 9% EBIT margin.
No, no, I said 8% to 9% is a normal EBIT margin. This quarter has been unusual because of the sharp increase in the PVC prices. So obviously, because of that, the EBIT margin has been better.
Okay. So realistically, we should look at 8% to 9% kind of a margin or 12% margin is sustainable, sir?
Again, see, this -- as I said, there is an element of inventory gains because of the sharp changes in the prices. Now this is not going to happen every time. And every quarter, we can't expect the sharp price rises. They move other way also.
Okay. So more sustainable would be 8% to 9% as of now.
Yes. But slowly, we want it to see improving.
The next question is from the line of Chintan Sheth from Sameeksha Capital.
Two sets of questions. One is on the resin side. You mentioned about the supply constraints we are facing, which restricts us to expand the capacity. So are we seeing a near-term or medium-term sales being -- steadily staying at this current level, high levels of 700, 750? Or do we see there are chances of supply coming back, and that will reduce overall spreads and not sustaining that guidance? And second question is on the pipe side. Given that we are broadly agreeing, we are slowly and steadily building our SKUs around the non-agri side, if you can provide some color on where are we compared to, say, a couple of years back in terms of improving other SKUs, both in the non-agri and fittings side. That are -- those 2 questions.
Basically, the number of SKUs that are rising is mainly in plumbing sanitation. And I don't think there are many number of SKUs that we are adding. So our addition mostly is in plumbing sanitation. And as far as the delta is concerned, it is always very difficult to say how much will it be coming quarter or coming period. In earlier years also, it has crossed $700, which is not unusual. So...
But given the supply constraint now versus in the past, there are certain underlying change playing out because of the EVs and all. You are sensing that ethylene supply chain is not growing, and that leads to more steadier business than what about it used to be in the past because of the supply constraints.
Global PVC capacity is also not going up substantially. I don't think the dynamic is going to change, which is known today.
Okay. Okay. Because for the past couple of quarters, and so we have been getting this very healthy spread sustainable for a pretty long time. So I was just wondering if that is a little bit sustainable and not going back to less than 500...
It is difficult to say so.
Correct. Okay. Okay. And in terms of gaps, do you want to highlight in terms of the SKU gaps we have compared to peers in the plumbing side, whether we still have a very long way to go or we have already covered a lot of SKU gap in our portfolio, and that will drive overall incremental growth in nonplumbing side?
See, SKUS, we will keep on adding year-after-year based on the demand pull. So we'll continue to do so.
And any plans on setting up PVC lines outside of these 2 units to cater better eastern and northern market, somewhere on the east or north side?
No. That we mentioned a while back. I know whatever expansion will take place will be brownfield. In future, definitely, we'll have to look at such options.
The next question is from the line of Kishan Gupta from CD Equisearch.
Yes. So I want to understand, like, is there scope to increase your PVC resin capacity through debottlenecking?
I think we are already at full capacity utilization. So there is no scope for any debottlenecking left now. We have already done it.
Okay. And what is your competitive advantage in PVC pipe business compared to other organized players?
I didn't get your question. Competitive advantage is -- competition is based on quality leadership, based on cost leadership as well as the marketing leadership. We have definitely established ourselves in an agricultural brand. So we are the leaders in agricultural piping. We are trying to leverage that brand value to our nonagricultural piping, where we are the late entrants. Our competitors in organized sectors are mostly in non-agri sector, and they have the advantage of early starting. So that is where you see the difference that we are lagging behind in non-agri sector, but we will be catching up on that.
And you talked about cost leadership. So could you elaborate that on -- in your agri business, what is your cost advantage compared to others?
Cost advantage, we have large volumes in agri. So our production costs are definitely better in agri pricing.
And how you people have adapted to this sharp increase in PVC resin prices?
PVC resin, we are making. So there is -- we have not to adapt for any raw material costs. Raw material costs are slowly moving up as the PVC prices are moving up.
So in terms of production because this last quarter, you sold a lot of resins, so this was -- we felt is a sort of adoption you did. So any other adoption you did?
No, it's not a question of adoption. See, we produce to our maximum capacity and we try to consume as much as possible captively. But whatever we cannot consume is definitely sold in the market. That is how it has always been.
The next question is from the line of [ Satish Kapoor ] from Kapoor & Co.
Yes. Sir, firstly, as you have articulated that this rally in the PVC prices are pertaining to, well, 2 or 3 factors that are playing out. Sir, going forward, sir, in terms of these factors reversing on all the moving parts to these factors changing or picking out, if you could dwell more on that.
I think the shortage of PVC is because of various reasons. One is the pandemic and the intra-region trade or the international trade getting affected, one. Secondly, ethylene to polyethylene. Polyethylene is softer. And so there are people who have taken longer shutdowns because polyethylene is not moving as it was, and that is where ethylene availability has been restricted. So there are -- operating rates on ethylene was low. Thirdly, EDC dynamics is dependent on chlorine availability, which is related with caustic, caustic being very soft. The caustic operating rates also were low. And that is why EDC production was low. So it is a cyclical thing that one after another, like EDC availability, caustic pricing structure and the ethylene to polyethylene conversions and ethylene plant operating rates. With all these dynamics, I think the PVC manufacturer also was affected, and that is where there is a shortage of PVC. And the prices went up. The demand is still there.
Sir, we can sum up that this caustic and the PVC prices are inversely correlated. Then -- as and when the caustic starts moving up, the -- then the PVC correlation, depending upon this theory, [indiscernible] part would also revert, and there would be a softening of prices. So that could be a good indicator if we see the prices of caustic soda rising.
Not necessarily. PVC prices also depend on the demand in the market for PVC. See, basically, in the caustic prices rise, there's more availability of chlorine. So they would necessarily to dispose of chlorine would have higher quantities of EDCs, which may soften the EDC price, but that doesn't necessarily mean that the PVC prices also will come down. There is good demand in the market that PVC prices might sustain and result in higher delta.
Right. Sir, you articulated about this quarter 4 volumes to be higher. Last year, quarter 4 FY '19 volume to be higher -- FY '20 volume to be higher than this -- this year will be higher than the last year. So sir, as per understanding, as you told the market, you are expecting the market to open up. Do we have the principle of coming up with monthly exit numbers on production on scale?
No, no, no. See, basically, we are not saying that there will be growth. We expect, if the markets open up, then we should be doing good volumes.
Yes, sir. I got your point. I was just trying to understand, as in case of various commodities and in various practices, the monthly numbers are available in the first week of the next month, the preceding number -- the sales volume of the preceding month. Sir, are we -- can we come up with this practice of giving us the monthly...
We cannot know exactly numbers are available because there's no industry body, which publishes such numbers.
For us?
Yes.
Okay. So that would be the case. Right. And sir, one more small point. So earlier, sir, we have seen our Chairman, Mr. Prakash Chhabria, leading the call always. Any reason for him missing the call and interaction with investors and analysts...
No, no. Every conference call after our annual results, he still participates.
No. I was just looking for the -- in every quarterly call, also, we used to hear his views, and he was there very much participating throughout the call. So last over -- last few calls, I have observed that he's not taking time out for us. Any particular reason for his missing?
No, no, no. There's no particular reason. It's just that he feels that once a year also he interacts, that should be enough.
Okay, sir. Okay. So it was just a thought process being an investor. I think not to demerit any one of you, sir, with all the right respect, sir.
The next question is from the line of Ritesh Shah from Investec Capital.
Yes. So this is the last question. Sir, you did clarify that we are not looking at revenue-related CapEx, which is great. But sir, just want to understand what is this MOU on technological side that we are looking at. If it's [indiscernible] feasibility stage, we just want to understand the thought process for you, sir.
Your question is not clear. What is the question?
Sir, my question is you did indicate that there could be something in Ratnagiri related to the resin plant. So just want to understand what is this MOU on technological or feasibility study that we are doing, just to understand the thought process there.
So the technology MOU has been done. That means we have the technology, which is already -- the engineering package is there with us for an expansion. This is there for the last 10 years. In the last 10 years, we are not able to get any form of supply for the feedstocks, and that is where it has been kept in -- put on hold.
Okay. So would it be fair to assume if the feedstock all of a sudden improves, and this is something that we would be looking at?
Yes. Either the feedstock can be available in India or it can be from the imported sources. On both sides, there is no such form of availability is there that we can have a security of feedstocks because such projects are large capital projects. And unless you have a surety of 10 to 15 years of supplies, I think nobody will invest in such capital-intensive projects.
Correct. And sir, what will be the rationale for this, just to ensure that we have full degree of backward integration? Would that be the rationale?
Degree of backward integration?
So that we don't have to buy PVC from outside, we can use captive PVCs.
Ritesh, it will be basically economics, which will drive this decision. See, for our pipes plant, PVC -- ample PVC is available, whether we get it in-house or we import it. So there's no death of PVC availability. That decision of PVC segment would be on its own merits and economics. That is why I said there is no plan right now on the drawing board that we should -- will go for that. Margaret, do we have any other questions?
No, sir, we don't have anyone in queue at the moment. Sir, we got one question in queue right now. We just got that. Shall we take that, sir, and then close the call?
Yes, please.
The next question is from the line of [indiscernible] from Dhanki Securities.
Actually, I had a couple of questions. One is on the operating side. Can you just share with us the revenue of fittings during this quarter and the 9 months?
No, I don't have those numbers.
Okay. For the full year FY '20, can you provide, sir, if you will be having the numbers right now.
For full year, I think we have given the volume numbers. I don't have the revenue numbers.
Okay. Okay. And okay, I'll take it later. But sir, as far as -- the other question is on the agri and non-agri mix, which you always specified that you have been 70-30. So that number, which you say 70-30 is on the total revenues, including the fittings?
Yes. Yes.
Okay. And that is the volume mix or the revenue mix, which you give?
That is volume mix.
That is the volume mix. Okay. So sir, how much might be the revenue...
No, no. In that volume mix also, we understand that the pipes, which we call agri pipes, in many marketplaces in north, they are used in housing also.
Okay. But sir, this 70-30, I understand that, but this 70-30 ratio, which you give, is the volume mix always that you have maintained over the years.
Yes.
Okay. So sir, then the revenue mix will be lower than the volume mix as far as agri and non-agri is concerned. How much is that approximately?
It's slightly lower because revenue is higher in non-agri.
So maybe it will be around, say, 60-40 or something like that?
No, not exactly.
It will be higher than that?
Yes. Yes.
Okay. Okay. And sir, I just wanted to understand, within the fittings portion, you always say that there are 15% to 16% of fittings is required in non-agri and around 6% to 8% is required in case of agri. So if I calculate that way, then will the fittings to agri and non-agri will be around, say, 60-40 or in the range of 50%, 55% to 45%, like that?
Yes, obviously, because the volumes there are higher in non-agri.
Okay. Okay, sir. And just one last question, if we can...
On. No, no, no. Basically, see, from the base of 70% of agri, if you calculate 5%, that number, you have to compare with 12% or 15% on 30%.
Right. Right. Okay. So that way, I get around 55-45.
Yes.
Okay. So that is the ratio, basically.
About, if not always rigid.
Okay, sir. Okay. And one last question is on the CapEx side. So as you have stated that in case of PVC resin, you don't intend to expand the capacity right away, but you may plan out in future if needed. The same is in PVC pipes or in PVC pipes, you are planning to increase the capacity now with the situation normalizing as far as the COVID situation is concerned.
In pipes and fittings, we'll continue to add capacity.
Okay. So this CapEx of INR 150 million, INR 200 crores, which you mentioned for FY '22, that includes the capacity expansion, which you must have...
Pipes and fittings, we do it in a modular fashion. So that is why CapEx is not very high. Each year, we add some capacity in the existing locations.
Okay. So sir, in the past, we have tracked that on an average, on the normal situation, you have added capacities in the range of 25,000 to 30,000 metric tons per annum.
Yes.
So that is the normal range, which we can assume going forward like you [indiscernible].
See, 30,000 to 50,000 is the addition that we'll be looking at. Right now, the plants for next year are not yet frozen. But yes, possibly in that range.
Okay. And this will all be in the brownfield as of now?
Yes. As of now, yes.
Okay. So what is the average CapEx per tonne in case of brownfield expansion?
Normally, it's about INR 15,000 to INR 20,000 per tonne.
This is including fittings also, pipes and fittings.
Yes. It basically provides the 15,000 to 20,000 for fittings, which is much higher because of the mold costs.
Okay. So the capacity, if you are putting in for pipes and fittings both, then it will be much higher. It will be much more higher than 25,000 as well.
In case of fittings, we only invest in molds. Of course, the investment is higher, but we have our exclusive vendors who move mold these fittings for us.
As there are no further questions from the participants, I now hand the conference over to Mr. Ritesh Shah for closing comments.
Yes. Thank you, Margaret. Thank you all for joining the conference call, and thank you management for having the opportunity to host this. Over to you for concluding comments, sir.
Thank you, everybody, for your interest in Finolex. We'll continue to work to see that the good work has continued. Thank you, Ritesh. Thank you, everyone.
Thank you. On behalf of Investec Capital Services, that concludes this conference. Thank you for joining us, and you may now disconnect your lines.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Finolex Industries Limited transcript - plus 251,000+ transcripts from 12,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Finolex Industries Limited earnings transcripts and 251,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $105 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.