Nauticus Robotics, Inc. (KITT) Earnings Call Transcript
May 19, 2026
Earnings Call Speaker Segments
Thanks. Morning, everyone. Here with me and taking part in the call are John Gibson, our CEO and President, Jimena Begaries, our Interim CFO, plus additional members of the leadership team. During this call, we'll start with prepared comments about the financial and operations results. After that, we'll take questions; results for the quarter that ended March 31st, 2026 have just been released, and you can find them on our website; also, a webcast of today's call is happening, and a replay should be up on our site not long after the call wraps up. Keep in mind that anything we say today about projections or what we expect for future events counts as forward-looking statements. Such statements carry a variety of risks and uncertainties, a lot of which we cannot control. Actual results could end up differing materially from what we currently expect because of these risks and uncertainties. Listeners should look over our earnings release and the risk factors covered in our SEC filings. Also check the reconciliations in our earnings press release, since non-GAAP metrics might come up on this call. Now I'll hand things over to John.
Good morning, and thank you, Kristin. I also want to thank everybody for being with us on today's call. For offshore activity, the first quarter of 2026 was seasonally weaker, which lines up with what the wider subsea and offshore services market went through during the winter operating season. Larger industry participants offered similar commentary, among them Helix and Oceaneering, and both of them cited winter seasonality, reduced utilization in the first quarter, and expectations for better activity in the second and third quarters of 2026. Here's what matters most for Nauticus: we made that quarter productive. Revenue wasn't at the level we wanted, but our team concentrated on the work that sets us up for better execution in the second half of the year as the operating season gains strength. We moved fleet readiness forward, finished substantial annual maintenance and refurbishment work across a number of the ROV systems, and kept getting our systems ready for higher utilization opportunities over the rest of the year. We also kept making progress on Nauticus ToolKITT, our proprietary autonomy software platform. Nauticus ToolKITT sits at the center of our strategy, since it lets us generate value through services and also through software licensing, technology-enabled services, and deployment on vehicles owned by customers. During the quarter, we kept integrating Nauticus ToolKITT across our subsea systems, together with new high-definition camera systems and other advanced sensors built to enhance navigation efficiency, data quality, and customer value. Progress also continued with Aquanaut and our autonomous manipulation capabilities. Aquanaut Vehicle One has now passed 500 hours of in-water testing on client-driven workflows, plus more than 200 successful vertical inspection behaviors on mooring lines. Those are meaningful steps toward offshore deployment, and the data from that testing keeps informing our software and engineering improvements. International expansion remains another key part of our growth strategy. During the quarter, we kept advancing our UAE and broader GCC initiative, including work toward a long-term operational and commercial presence in Ras Al Khaimah. For Nauticus, that region represents a meaningful opportunity across offshore energy, technology licensing, manufacturing support, and strategic partnerships. Last, we're happy to welcome Brian Allen as Chief Revenue Officer. Brian brings close to two decades of experience in subsea robotics, autonomy, and commercial leadership. His focus is clear: turn customer interest into revenue opportunities across offshore services, software licensing, hardware sales, defense, and international markets. Although Q1 reflected normal offshore seasonality, we believe Nauticus exited the quarter better prepared, more focused on commerciality, and positioned to pursue a strong opportunity set through the balance of the year; with that, I'm gonna turn it over to Jimena to walk you through the financials. Jimena?
Thanks, John, and good morning to all of you. I'll walk you through the financial results we posted for the first quarter of 2026. In Q1, our focus stayed on protecting liquidity, keeping stockholder equity intact, and obtaining the financial resources needed to back the company. First quarter revenue came in at $0.2 million, a sequential decline of $0.9 million and roughly level with the same period a year ago; that result tracks with the seasonal patterns we usually see in Q1 and mirrors the broader market conditions John described earlier. Operating expenses totaled $5.8 million for the quarter, which is $0.2 million below Q1 2024 and $0.8 million lower on a sequential basis. G&A expenses were $3.2 million in the quarter, an improvement of $1.2 million versus Q1 2025. On a sequential basis, G&A rose $0.6 million, driven by the non-recurring legal fee credit we recorded in Q4 2025. The quarter's net loss was $9.3 million. That represents a $9.9 million sequential reduction in net loss and a $1.7 million larger net loss than Q1 2025. These swings, favorable and unfavorable alike, stem mostly from fair value changes on our debt instruments. Adjusted net loss for the quarter reached $6.4 million, versus $10.4 million in the fourth quarter of 2025 and $6.6 million in Q1 2025. Cash stood at $5.9 million when Q1 2026 ended, compared with $7.6 million at the close of 2025. The decline reflects cash used in operating activities. Looking ahead to the second quarter, we continue to take a disciplined approach to running the business and safeguarding financial flexibility. At this point, I'll hand the call back over to John.
Thanks, Jimena. At this point I'll hand things over to the folks heading up our efforts abroad and the chances we have to grow revenue. Jason Close is up first to share what's happening with our expansion in the UAE. Jason?
Thank you, John. Since the previous call, our attention has been on shifting from planning to implementation regarding efforts to expand in the UAE and the wider GCC. Although the present regional security situation has restricted our capacity to journey there ourselves, it hasn't decelerated what we're accomplishing. As a matter of fact, we've kept pushing ahead with the essential groundwork required to set up an office in Ras Al Khaimah and to underpin growth over the long haul in that area. Throughout the last few weeks, we've been busy working to pinpoint a site in Ras Al Khaimah capable of serving our ongoing operations and commercial objectives. We've likewise brought on board a marketing firm based in the UAE to assist with the coming stage of our efforts to activate the market. Such work encompasses upgrades to our site, our branding, and our go-to-market assets, aimed at the regional marketplace and, more widely, as we keep honing the way we present the Nauticus portfolio around the world. Simultaneously, we observe that commercial prospects across these regions keep advancing and coming to maturity, despite the wider ambiguity. The present climate has additionally underscored how pertinent our offering is for government and defense-related uses, especially in cases where unmanned systems, operations conducted remotely, and enhanced safety in operations rank as priorities. We're proceeding with caution and discipline regarding the way we pursue those chances, yet we think our portfolio lines up nicely with a number of the region's needs over the long term. Concurrently, we're noticing greater curiosity from beyond the GCC area as we keep broadening our commercial engagement internationally; on top of that, we keep making headway in our joint work with Forum Energy Technologies concerning the Olympic Arm platform. Throughout the first quarter, the team wrapped up an assessment of the design documents already in existence, and during the second quarter, we anticipate kicking off joint testing work on the prototype as it stands now. This stays a significant chance to further confirm our technology and widen its use via well-established industry pathways. On the whole, we keep perceiving long-term promise in these global markets. Stay concentrated on carrying out our growth strategy in a disciplined and organized manner all the way through 2026. Having said that, I'll pass the call along now to Steve Walsh, who heads our sales, to provide an update.
Thanks, Jason, and good morning, everyone. Q1 revenue came in as we anticipated, showing the usual seasonal dip that tends to hit Gulf of Mexico operations during the winter. Offshore work was constrained by weather through a large portion of the quarter. Early in the year, softer crude prices made the operating climate more cautious. Lately, though, energy markets have started to firm up, helped in part by geopolitical instability and the continuing conflict involving Iran. Even with that slower start, we're feeling quite optimistic about how the rest of 2026 shapes up; upcoming offshore activity shows strong momentum, with a number of new contracts having just kicked off in both the offshore oil and gas sector and the offshore wind industry; that diversification keeps us well positioned as subsea services demand grows across multiple energy markets. On top of that, we keep actively chasing project opportunities along both U.S. coasts, throughout the Gulf of America, and in select international markets; we're also widening our focus in the defense sector, where we think our subsea capabilities, operational experience, and technology platforms set us up nicely for future opportunities. Along those lines, we're eager to begin deploying resources in early June to support a large defense contractor, marking the first work of this kind in over a year. Crucially, our team put the slower offshore stretch to good use. Over the quarter, we finished major annual maintenance and refurbishment work on several of our ROV systems. Those efforts make sure our fleet runs at peak efficiency and reliability as we head into what we anticipate will be a much busier 2026 operating season. We're also still achieving meaningful progress on the technology side. Nauticus ToolKITT, our proprietary software platform, together with new perception capabilities and other advanced sensor technologies, is being successfully integrated throughout our subsea systems. Such enhancements boost operational capability, data quality, and overall client value while setting us further apart in an increasingly competitive subsea vehicle market. As the year moves along, we believe these operational gains, paired with strengthening offshore demand, geographic expansion, continued technology integration, and growing exposure to defense-related opportunities, leave the company well positioned for growth and long-term success. Thanks once more for your ongoing support and confidence in our team. With that, I'll hand things over to Brian Allen, our revenue lead, for his thoughts on 2026.
Thanks, Steve, and good morning to all of you. This is Brian Allen speaking — I've just taken on the Chief Revenue Officer position at Nauticus, and this marks my initial earnings call since joining, so I'd like to be candid regarding my perspective and my plans. You're all aware of the weather-related factors behind our Q1 results, and my responsibility will be to expand where our revenue comes from — spanning technology, robotic hardware, and services across additional regions worldwide — which should help even things out and shift us toward a faster-growing trajectory. A quick note on where I come from: over the past decade I built a subsea robotics and AI business named Beam from nothing up to roughly 230 employees, with revenue climbing between 60% and 100% each year and an $840 million sales pipeline that generated $90 million in sales and order book during my last 12 months; what we sold was autonomous inspection technology and tech-enabled services into precisely the markets where Nauticus is active. Prior to that, I logged 10 years at sea — initially piloting ROVs, later supervising and managing them for oil field and wind farm construction. These customers are familiar to me, so is this market, and I understand what's required to sell advanced autonomy into precisely this sector. Why did I pick Nauticus? People have asked, and honestly, it comes down to two things I discovered through my technical diligence that I haven't encountered anywhere else among marine businesses. To start, Nauticus ToolKITT stands as the most advanced autonomy software you can buy right now for subsea vehicles. It leads in the category that counts commercially — a deployable, supported product customers are able to run on their current vehicles as of today — and I can see a number of near-term opportunities in the market for this software. When it comes to smoothing seasonality, software sales are our most obvious path, since weather doesn't affect them. Second — and this genuinely shifted my thinking — is what the company has done with autonomous manipulator control. The intellectual property in this area could be as much as five years in front of the nearest competitor. Considering how heavily the offshore inspection, intervention, and repair market is limited by pilot skill and vessel expenses, dependable autonomous manipulation amounts to a very substantial commercial opportunity. Getting that to market together with the core Nauticus ToolKITT platform, and providing it alongside Aquanaut, is where I believe the genuine step change for this business lies. As for my plans, my top priority is securing early commercial wins that restore market confidence, and I've already pinpointed a small number of near-term Nauticus ToolKITT opportunities plus a potential high $7, low $8-figure Aquanaut services tender from my own network that I plan to pursue quickly. Past that, I'm assembling the marketing function and sales infrastructure to push tech sales, technology-driven services, and Aquanaut hardware sales around the world. A central part of what I do involves producing clear commercial signals from the market that Amin and the engineering team can rely on to steer development efforts. When what we create is more tightly connected to the needs our customers express, revenue follows from that technology more quickly. My approach to capital is an efficient one. In the current market, that's simply required, and it's the way I've constructed companies throughout my career. Systems are already being designed by me that employ AI to take over portions of our sales and marketing work, and that lets us boost commercial strength fast while spending a small share of what the usual method would require, and with less staff. At a business like ours, at this point in its development, each commercial dollar has to deliver a lot. One last thing. Other options were available to me. Nauticus was my pick because the technology in this business truly stands apart, and that's something you seldom find in this sector. The people here are impressive. What I see is an unevenly weighted chance that justifies the commitment. As part of my pay, I've acquired a stake, since alignment between my interests and those of every one of you is what I want; this isn't a talking point. Had I not perceived a promising future for this company, joining would not have happened. Over the next few quarters, I'm eager to bring all of you up to date on how our commercial efforts are going. John, back to you.
Thanks, Brian. It's great to have you with us. We know that revenue in Q1 is consistent with a slower seasonal stretch, yet the way the business is heading gives us encouragement. Fleet readiness is in better shape. Our technology keeps moving forward. Nauticus ToolKITT is turning into a more evident commercial prospect and provides a way to counter part of that seasonality. What we're doing to grow in the UAE and GCC is shifting out of planning and into action. Above all, we're tightening our attention on revenue. With Brian on board, a more robust commercial setup, and ongoing chances spanning software, offshore energy, defense, international markets, software licensing, and hardware sales, we think Nauticus is set up to gain momentum for the rest of 2026. We're grateful for the ongoing backing of our shareholders, our customers, our partners, and especially our employees. We're eager to share updates on how we're doing in the coming quarters. With that, Operator, I'd like to open the line for questions.
Thanks a lot. Morning, everyone, and I appreciate you taking my questions; it's excellent to see the new senior addition alongside Brian and the other talent joining Nauticus lately, and I'm really eager to follow how the team advances, you know, over the remainder of this year. To start, my first question is about the revenue trajectory. In Q1, there's obviously seasonal softness, which is to be anticipated, yet it does appear somewhat weaker than anticipated. Could you discuss what your approach is for lowering those seasonal fluctuations in your business going forward? For instance, in what way would software contribute to that? And regarding, you know, the cadence as we move into Q2 and the second half of the year, whatever you can tell us about, you know, the main revenue drivers in that period would be useful. Thanks.
Thanks for that, Peter. The way we achieve a more stable revenue picture is actually quite simple, and it requires us to start doing a couple of things. First, we need to get ToolKITT sold, and I’ll hand it over to Brian to speak to that shortly. Doing so removes the seasonal swings and the weather-driven exposure that affects our top line. Second, we need to establish a presence internationally, so we aren’t tied to the seasonal patterns of the Gulf of Mexico or North America. If we execute those two approaches effectively, I believe it will smooth things out and level the revenue profile for the company; on the software side, Brian, do you have anything you’d like to add regarding software and how you see it removing the seasonality and the softness?
Yeah, of course.
North America?
So, I'd say the quickest thing we can pull to boost ToolKITT revenue is licensing the ToolKITT software. That product has matured. It's already running on platforms from other vendors, among them the Comanche and the VideoRay Defender, and it has beaten the solutions that were there before. A big advantage of selling software is that it happens throughout the year. These devices, basically, they get used throughout the year. And the licenses get billed throughout the year. When it comes to evening out the profile, this is the most obvious path to a revenue stream that runs all year and is steadier than the unevenness you get with contracts of the offshore services kind.
Right. I'd have figured we would be somewhat farther along too when it comes to what we're doing in the GCC — because of the conflict, we haven't been able to scale up as fast as we'd like. Even so, things are moving along nicely, there's a great chance for us in that region, and it's got us enthusiastic. I expect to head back to the UAE, most likely in the middle to latter part of June, and keep building on that opening. The situation there set us back somewhat, but our drive hasn't dropped off at all, and we're eager to collaborate with them.
At this moment, we're still in the early days. I've only been part of the company for under 7 days at this point, and I already have a substantial amount of industry connections whom I've contacted, and there's interest in ToolKITT. I have calls I need to make, meetings I need to attend, and there's an interested market we can sell into. In my view, ToolKITT will be quite beneficial for what lies ahead for us; the only question is how fast we can turn that pipeline into results.
Yeah. Next question, Peter.
All right, thanks. So, regarding the Northeast ROV fleet — that would serve as a solid demonstration of ToolKITT, right? Has that been useful when it comes to the licensing talks, and what's the current status there?
That's also a genuinely strong question. If you're going to offer ToolKITT for ROVs, you really have no choice but to prove it on your own fleet first — otherwise it rings hollow. Getting it out there in the field is something we're thrilled about. On top of that, it functions as our finest test bed, which tells us exactly what level of quality customers will receive; and we feel quite confident about showing that evidence of our efforts, letting them witness firsthand the efficiency gains that come with running autonomy like this across their present, already-owned ROV fleet. Operators then have a path to squeeze more use from the equipment they already own, while possibly avoiding the purchase of extra ROVs down the line. Boosting the capability of an existing fleet this way is a real advantage. Suppose your fleet numbers 10 units and you can achieve 20+% more — that means 2 units you can skip buying. To my mind, that represents a terrific financial opening for ROV commercial operators wanting better fleet utilization minus any growth in asset count. Demonstrating and measuring that benefit for ROV operators by running it on one of our own units is going to happen, and I believe it lifts our odds of moving the software. Right — it's located up in the Northeast, and I expect we'll be sharing updates on how well it's performing there as this quarter unfolds and this work gets done.
All right, thank you. Brian brought up that chance in the high 7, low 8 range. I apologize, but would you mind saying that once more so I can be certain I've got it right?
Sure, absolutely. One aspect of my role involves growing the different income streams throughout EMEA, and I'm reviewing technology-enabled services as well as ToolKITT licensing and the extended sales cycle for Aquanaut hardware sales, for which we must establish the infrastructure in order to convert that. The two near-term possibilities are basically, as I mentioned earlier, software licensing and technology-enabled services. In order to accomplish that, we need to begin developing a pipeline of prospective services contracts in EMEA; these are comparable to the work already underway in North America. This capability already exists within the company; it's utilizing similar assets. The only difference is geography. I'm beginning to contact my network and introduce tendering opportunities of a similar kind to what the business is already able to deliver in the U.S., though located closer geographically to where I'm based.
All right, thanks a lot. This one's more of a macro-level thing. I just want to find out how much budget cycles really matter when it comes to your newer customers. Take oil and gas, for instance. And with government-related work, I'd figure we may already be beyond the cycle for fresh work in 2026. Should we be thinking that way — that attention ought to shift toward what's possible in 2027? Do your customers still have some 2026 budgets they can draw on? And when it comes to those 2027 budgets, is there any signal or confirmation out there? From your time spent with customers, annual budget announcements? I'm just curious, broadly speaking, how all of that lines up with your customers' cycles.
Okay. A lot of questions in that question, Peter.
Sure.
Alright, let’s take a look at how things are shaping up. Number one, I’ve just returned from Washington, where I was doing marketing and business development on the government side. We’re present there, and I believe we’re doing a strong job positioning our capabilities and the ways we can have an impact on a great deal of government work. There are things I’m not able to discuss, but what I can say is that we need to be there at this moment and marketing so that we can successfully be included in the 2027 and 2028 budgets; it appears they are planning two years out, and you want to be present and on the ticket for 2027 and 2028. My sense is that we've done a really good job getting ourselves set up for that 2027 and 2028 budget cycle. As for the 2026 budget, it will likely take something like a vendor default, a vendor problem, or an emergency situation where they need someone to fill the gap — and we're in a position to come in and assist them if an urgent need comes up. What I see as our genuine opening is getting under contract for the 2027 and 2028 work, and that effort has to happen right now, which is exactly what we're doing. At this point, every one of the products is finally ready to be brought in, to bid straightforwardly on commercial work at that level, and to be looked at as a vendor for the 2027 and 2028 season. This turned out really well for us. When it comes to our current customer base too, we're still seeing plenty of room to grow on the oil and gas side. A great deal of transactional and call-out work is headed our way for the remainder of 2026. My view is that oil and gas prices will hold steady around current levels or climb higher. I don't expect the Straits of Hormuz to be opened up in a way that pushes prices down, and even if that happens it would only last briefly, until the full extent of the infrastructure damage from the conflict becomes clear. So plan on elevated oil prices over the longer term. Because of that, I expect activity will keep building in oil and gas—especially offshore in the Gulf of America and globally—since those barrels cost the least to produce. That’s a huge opportunity for us.
May I add to that?
Yeah.
My experience with Nauticus is more limited, though I can speak to the broader industry based on prior roles where I did comparable work involving similar vehicles in a comparable setting. When you look at contracted position at this stage of the year, you can forecast revenue for the remaining months to some degree, yet spot work and emergency work are never part of that picture. At the company I worked for previously, looking from where we stand now, an uplift of 30%-40% on forecast revenue is what we would usually observe. That said, it doesn't map directly onto Nauticus, since our region is North America rather than EMEA, but typically you do witness a meaningful revenue bump across the later quarters, driven by spot work and the spot work market.
Yes. I believe a further unintended effect of this conflict is that you will likely witness a growing focus on wind power and on servicing the offshore wind installations, as folks attempt to counterbalance elevated prices for oil and gas. Where we stand with respect to performing wind-related work in the Northeast is going to benefit us greatly, and Steve possesses extraordinary ties in that region, and so does Brian. I believe we are able to go after a substantial share of the offshore wind farm business, which people are going to concentrate on given the price level that oil and gas will sustain over a longer stretch. In my view, these alternative offshore energy generators are going to experience a great deal of activity.
All right, that's great, thanks. Before I rejoin the queue, I'd like to pose just one additional question. You're holding roughly $6 million in cash, and the burn has kept going. Over the coming 2 to 3 quarters, how should investors view your funding runway?
Hemant, would you like to take that one? What I'd say is, in the immediate term, Q1 came in soft where cash flow is concerned. So we're, you know, looking at Q2 and Q3 for the point when revenue and collections start climbing. For a business of this type, cash flow is a persistent challenge, since the money comes in only once the work has been completed. We'll likely keep tapping the ATM in modest amounts. The ELOC is another tool we'll draw on, and our existing lenders back us tremendously; availability of cash isn't something that worries us. Going forward, we take the smallest amount we possibly can. Getting to cash flow breakeven is what we're aiming for, so that no alternative route — one that dilutes shareholders or saddles us with long-term obligations — becomes necessary. The capacity to hold up over the long haul and to bring this company to where it ought to be by 2027 and 2028 exists. Building excellent products, delivering excellent outcomes for customers, and customer satisfaction are where our attention sits, since this company is built for the long term, not the short term. The financing required to carry us through 2026, I believe, is within reach, and by the end of the year and into 2027, we must be funding ourselves.
Perfect. I really appreciate you answering my questions and the presentation your team gave. I'll rejoin the queue.
Alex Latimore, Analyst: Starting off, I'd like to— Alex Latimore, Analyst: Is this coming through? John Gibson, CEO: Yes, Alex, we've got you.
Oh, so you're able to hear me? All right. I don't know exactly how much got through there, but I'll combine a couple of questions into this first one. To begin with, I wanted to ask whether you might walk through what ToolKITT brings to subsea vehicles in terms of improvements. If you happen to have — and this is still the first question — any measurements illustrating the autonomy gains before versus after the upgrade, that would help. Then the second piece: is it necessary to upfit customers' ROVs, or do they already possess the hardware required to operate ToolKITT?
You've come prepared this morning. Let's take the final part first, then move back to the opening part; to control and navigate the vehicle, additional equipment has to be mounted on the ROV, usually an INS, which tells us precisely where the vehicle sits and gives us the capability to control it. So yes, extra equipment must be mounted on the ROV. Once that equipment is in place, we can then actually control the vehicle's dynamic positioning, allowing us to achieve bottom locks and keep the vehicle at a given height above the sea floor, and we can manage its navigation from one point to another. Now, here's what we've done, which speaks to the first part of your question: the very first time this was used, we ran a quantitative test, and I believe we put some short videos up on X. Here's what we found: when autonomy is performed on an ROV the way we do it with ToolKITT, you have no knowledge of current, but instead you optimize the path, so the thrusters keep operating at varying levels to hold a specified line. It travels from one point to another very efficiently in a straight line while continually adjusting all eight thrusters to maintain connection and fit to that line. When a person is operating the ROV and still steering manually, you're attempting to overcome the current, you're attempting to pull the umbilical behind you and the tether. Everything is working, plus the currents, and actually currents differ at differing depths, so it's quite a complicated operation. They're relying only on the thrusters to try to move the vehicle from point to point. What we found was that there's at least a 20% reduction in efficiency and inability to stay on that line when steering manually; now, that carries a lot of consequences. First, a 20% increase in time because of doing it manually — just convert that into 20% of a daily vessel rate, which runs anywhere from, say, $25,000- $150,000. Take the range of $40,000-$50,000 per day — you're putting aside $8,000 daily purely on vessel time. At the $40,000 mark, that still leaves plenty of space for a software license charged on a day rate basis, which would boost how well those ROVs perform. Then there's a second effect: whenever you're traveling sideways to and fro, or shifting vertically, the consistency of your data suffers, so you wind up doing substantial post-processing to obtain what's wanted and desired, at the quality you're after. By contrast, if you maintain a fixed position above the seabed and travel in a straight line, data quality comes out far higher and the effort required for processing afterward drops a great deal. My view is that this delivers benefits for data. It delivers enormous benefits for cost. In fact, things are getting better, and the ROV operators are among our strongest supporters, since it cuts down on what consumes so much of their time. Their focus should be on the task at hand — inspection, examining data, watching the infrastructure — rather than piloting the vehicle. You're restoring the ROV's attention to the job in front of it. The upside here is substantial, and my belief is that uptake of this across the ROV world is going to accelerate sharply. Certain heavy duty ROVs already carry some of these capabilities, yet as we keep discovering, no one ever switches them on. A commercial quality autonomy system aimed at the ROV world has never truly been their focus. My sense is that we're going to lead in that.
All right. That was a fantastic answer. Really nice detail there. Let's think. Since we're on the subject of the data, could you perhaps rank the two or three data points you gather that hold the most value? Does any customer show interest in purchasing that data?
All right. Sure. I'll let a few of the others on this call chime in as well. Usually, our contract is to gather the data on their behalf, and that data is proprietary. No data library exists on our side. I've often wondered whether we might reduce what the data costs and then establish a data library. The bulk of this is proprietary infrastructure. They're the ones paying, they're the ones owning, they're the ones using it to run their infrastructure. You hand it back to them, and we don't offer that as a data library, the way you'd see with, let's say, speculative seismic, where you gather data and then sell it to several parties. That's not what we do in this industry for the majority of the work performed with ROVs. Let me check with the people here so I don't steer you wrong on this, but the chance to do that does exist, especially once you reach the environmental work where you're doing, you know, examining coral reefs, and so on. But in cases where it serves the general good, having that data library, yet you still need someone to gather that data and cover the cost of gathering it. Brian, do you have anything you'd like to add?
Regarding the primary portion, keeping the rights over, say, analyzing customer data is tough. Some approaches exist that one could take in that area, and we ought to discuss it once this call wraps up.
Right. That data is theirs — it belongs to the customer — and every one of those customers wants to keep it confidential. From their standpoint, it's an edge over competitors, which makes it hard to apply it toward anything else, really, beyond a fee-for-service arrangement. All we do is hand over the data.
All right, that makes sense. I follow you. There's one more thing I wanted to ask about. I'm just interested in which major technology developments you're anticipating rolling out during this year and the next one. What kind of advantages come with them? Would that involve introducing the new manipulator, giving the manipulators autonomous capabilities, or is it something different?
That's yet another excellent question. One factor, I believe, is a strategic choice made by the company — in contrast to certain rivals of ours, we don't operate within the sensor sector. That leaves us with 22 sensors installed, and we're free to select sensor improvements. Any time we spot one showing enormous progress, we're able to swap it in and take out a different one; as a result, we aren't stuck with a sensor that could be two, three, four years old. So we're noticing quite impressive gains in certain imaging abilities, and because of that we're installing cutting-edge equipment; actually, I'd tell you that at this moment we're evaluating a few of the fresh sensors on behalf of some of these firms. That represents a chance for us — leveraging our platform to evaluate sensors belonging to other businesses, having them compensate us for genuinely bringing those sensors into operation and benchmarking them against competing sensors too. We continuously assess what will deliver the most differentiation for us and what approach is correct for imaging and gathering data, whether that's for pipelines or for cables. It makes no difference. Our role will be a platform for rolling out the finest technology, rather than attempting to create those sensors ourselves. That's an extremely competitive model with high R&D expenses, and we won't be getting into it. Exciting. Turning to autonomy, we have the next-generation manipulator. Components are arriving for assembly, and we're quite enthusiastic about installing that manipulator onto the Aquanaut. I've held discussions with rivals and clients, along with prospective clients. For this market, this manipulator is an absolutely perfectly suited piece of equipment. I give credit to our team here; it's a mid-range manipulator. It isn't truly a small, light-range manipulator of the sort you'd encounter, which are merely small arms capable of lifting, you know, perhaps 10, 15 kg; nor is it meant for a heavy-duty, work class ROV capable of lifting hundreds of kilograms. For operation, it will fall within that 50 to 70 kg range. It's also extremely well engineered when it comes to maintenance. What we discovered from using other manipulators and from building manipulators is that spare parts are essential, and you must keep them on board. You want the most straightforward possible capacity to repair and maintain, since you'll be in the parts business the moment you begin selling manipulators. These guys treat them roughly, so you need the capacity to manufacture replacement parts and possess a genuinely solid ability to source parts for them as they buy the manipulators. This manipulator offers a 3 to 7 degree of freedom. If we can accomplish the task without every one of those degrees of freedom, we can bring it down to 3. Suppose you simply want to make contact with something using a cathodic probe, collect a basic sample, or perform a cut—7 degrees of freedom aren't necessary for that. A human arm isn't required to get it done. What you're after is the minimum equipment performing the job in the simplest manner, which allows you to keep cost out of the system and cut down on non-productive time—the maintenance that comes from having more joints on the arm than the task demands. In my view, it's an outstanding design. Finally, autonomy for arms is what supports all of this, and I believe that's remarkably unique across our entire industry. Even in the terrestrial sector, being able to use an arm that isn't automated—where it repeats the same action again and again—isn't really achievable in the subsea setting, given where the Aquanaut, the ROV, and so on are positioned. You need some perception to deal with the object you're interacting with. By contrast, if you're building an automobile, you can perform automated welding with an arm. You can move to a fixed position, shift to another fixed position, pull back, and repeat that. That isn't the world we operate in within maritime. You must be able to observe the environment and engage with it. I think we'll have ToolKITT available in multiple flavors. One will be for ROV navigation. We can strip down some of what's needed there that we use on the Aquanaut. ROV-related ToolKITT, Nauticus ToolKITT. We'll have the manipulator-related software, and we'll also have it for the Aquanaut or full AUV. The entire market for autonomous manipulators looks extremely, extremely exciting.
Fantastic. That's wonderful. It looks like the momentum is really going Nauticus's way right now. I can't wait to see how you all move forward. Thanks.
Thank you, I really do. Look, 2.5 years went into preparing these products. At this point, the coming year goes toward bringing them to market and truly demonstrating the revenue that these investments can generate. I'm grateful to every shareholder who has contributed funds, because it's left us in a strong position.
Thanks, and I appreciate the investor update. Brian, glad to have you at Nauticus. My question has two parts for you. Considering what you've done building up subsea robotics and autonomy companies, and just to clear up anything that may have come up earlier on this call, where do you think your impact on revenue will show up first — could be services, software licensing, selling hardware, or partnerships abroad? When you look at the pipeline of opportunities, what's the right way for investors to think about how big and how soon commercial opportunities could be? I suppose that's without diving into anything too much like formal guidance.
Well, that's a great question. Yeah, I appreciate the welcome. Let me break that into two pieces; regarding where the earliest impact lands, my view is three time horizons that run alongside each other instead of separate buckets. This really isn't a services versus software versus hardware kind of play; each one depends on the others and they feed off one another. Out of all of them, the quickest thing we can pull is the Nauticus ToolKITT software licensing offering. I mean, that could shift within a matter of months. We've already got market contacts who are interested. We've already got data showing how it beat incumbent solutions in head-to-head trials. We've already got it integrated with the Forum Comanche and VideoRay Defender plus other vehicles too. Right now we're working on a few different vehicle flavors. That's something I can sell today, and the whole team has flagged a good number of opportunities for us to pursue. That's likely where the first commercial signal appears. The second lever running next to that one is technology-enabled services, and our services business acts as the operational engine that validates that technology out in the field. That's where we anticipate margin expansion showing up as we swap autonomy in for vessel time and pilot time as ToolKITT gets into our own systems and gets used far more extensively now that it's a functional, robust product and commercially hardened. Like Steve went through, Q2 and Q3 are the natural seasons for that to begin improving too. Our third lever, which we brought up, is hardware plus international partnerships. To convert at scale, those need a sales infrastructure that isn't really strongly present in the company right now. We've had some early wins and early meetings and interest, but we truly need more sales infrastructure, which is what I'll be putting in place across the next three-four months. EMEA for the international partnerships, that's a market I know very well from my prior years, and the operators over there are actively seeking this type of autonomy capability that we have. Instead of making promises or basically, I'd rather underpromise and overdeliver internationally than the other way around. I'd warn against framing this as software versus hardware. The thesis is that services revenue is the development and testing area. Nauticus ToolKITT software is showing genuine demand from the market, and once customers see what it can do, that demand naturally drags the hardware along with it. Selling Aquanaut hardware takes longer to close, yet once that operation is running smoothly in roughly two to four years, it will bring in high tens of millions. At this moment, the change in our revenue mix — and my primary job — is steering us toward software with better margins and recurring income. That is the general path I plan to keep pushing along right now. No, I can't offer formal guidance. In my first week, I truly wouldn't want to. How I'd put it is that the opportunity in front of us is enormous, and the addressable market for autonomy-enabled subsea services software reaches into the billions. Today's consolidation squeeze among traditional ROV contractors — many of whom have built their own partial hybrid offerings — opens a window for commercially available autonomy companies to capture share, and that window is open at this moment. It won't remain open indefinitely, yet we are the first mover in this arena while commercial pressure already exists, with everyone trying to outcompete each other. To be candid, you ought to anticipate a commercial signal and pipeline expansion ahead of any revenue scaling, since software licensing is recognized on a different basis than project services are, and larger international hardware agreements take longer to close. What I'd encourage you to monitor are the leading indicators, chiefly the quality and breadth of the pipeline. Beyond that, watch for news regarding third-party deployments, and third-party platforms, partner announcements, and we will also discuss repeat business and framework agreements as they arrive. Those items will demonstrate that the commercial engine is functioning, and they will appear in the numbers 6 to 12 months following those announcements. I can give you an update on commercial progress every quarter, but I'd prefer you judge me by what we actually book rather than what I can forecast from this seat on my first call.
All right, that's excellent. Thanks a lot. I've got one more question about revenue. You mentioned expanding possibilities in defense-related uses — could you give us some extra detail about where Nauticus is drawing attention? Things like inspection, surveillance, autonomy, intervention, or subsea support, for instance — and do you think defense will eventually account for a larger, more significant share of the company's revenue mix, including with regard to the Leidos partnership?
That's a great subject to cover too, Robert. I appreciate you asking; we're currently involved in a project that will get underway before long, and it mainly involves service-type work on an AUV. Our hardware expertise is truly where we excel in this instance. Once we finish that portion, the software for it will come next. Both of those elements will be part of this project. In my view this is a, you know, relatively small project, yet it's one that could generate substantial growth with this specific major defense contractor. We devoted three days to the Sea Air and Space Conference in Washington, where we met with essentially every one of the big defense contractors. I believe our product line is a very strong fit. Actually, it was heartening to walk the floor there and observe how distinct we are. Plenty of companies are building USVs. I'd estimate 70% of the attendees at the conference were displaying unmanned surface vehicles. There are lots of, well, I'll refer to it as an AUV, though Aquanaut truly isn't an AUV — it's closer to an underwater drone than a missile, which is what an AUV usually is, prop at the rear, traveling straight. We found almost nothing in that category. We found a fair number of companies making AUVs in various sizes and with various depth ratings — those are simply the bullets. The differentiation was enormous across the board. Every organization we hoped to talk with, we secured senior-level meetings, and every one of those meetings proved highly productive. We have some follow-ups to handle with them. I think the defense sector truly, it has enormous appetite for the capabilities and competencies we offer. I also think we're ahead of the market in this space. The manipulators themselves, especially autonomous manipulators — how to use them and the demand for them is only just starting to appear. We are especially in emerging markets. I'm grateful for the patience shareholders have shown, since when you're in an emerging market, gaining traction and getting the word out is somewhat more difficult. Every market we're pursuing is underserved. We're not in the, you know, business of boosting productivity within an existing market. We genuinely operate in underserved markets with new solutions, and the defense side is a fantastic area for us at this moment.
All right. Thanks, John; that helps a lot. One final item from me. With the tech assets this company holds, the opportunity in the market, and the capital it needs right now, how does the board view the entire set of paths available for maximizing shareholder value — things like strategic partnerships, licensing deals, commercial alliances, financing options, or other strategic possibilities?
That's another good, broad one, Robert. What's the board's view on it? Our board is excellent, all right? That comes first. Completely committed to building shareholder value. If any proposal arrived on the strategic opportunity front, you'd find that they'd examine it fairly, since their aim is to grow shareholder value. When proposals arrive, the board will review them. Nothing gets filtered out here. It genuinely is the board evaluating what we ought to do that serves shareholders' interests best. On licensing, we went down that path with Forum Energy Technologies; we're very enthusiastic about how things are progressing there. We're figuring out how to be a strong partner in that relationship, collaborating with them. For us, licensing is a fantastic method of operating without needing to sink all the capital into manufacturing those items, while still capturing the value of the intellectual property we've developed. In this instance, it's one of our earliest manipulator generations, and it will go on ROVs. That has me quite excited. When it comes to manufacturing, it's an approach with low capital and high margin. The same holds for Aquanauts. Although we'll manufacture them in Ras Al Khaimah under the agreement currently being worked out, we would be quite open to licensing that technology so that someone else builds it and bears the manufacturing cost, while we'd collect a licensing fee for the Aquanauts. ToolKITT clearly involves licensing. As a company, to achieve the margins we want overall — measured on a blended basis — we must exceed 50%. Now, on the software side of the business, you're seeing margins around 80%. On the services side, you're seeing something in the 25%-35% range. On hardware, you're seeing the 25%-30% range. Without carrying the capital cost for manufacturing, I'd want to land in that 15%, 20%, 25% range; that's our thinking on what licensing can do on the hardware side. The software side will be 80+ . The objective is blended margins above 50 in our model; as for strategic partnerships, we currently have a solid relationship with Leidos and are enjoying our discussions with them regarding possible future projects, and we'll keep that going. It isn't an exclusive arrangement. We're in talks with plenty of other defense contractors, and we'd be eager to partner with them on any project matching our competencies and capabilities. Robert, we have no reservations whatsoever about that.
Thanks to each of you for joining this call. As you're aware, what you hold is a stake in a young, growing business. Our product lineup is excellent, and our approach is excellent as well. The strongest proof of that, I'd say, is how talented the folks are who sit on our management team right now. That group is remarkably capable, deeply devoted to what this organization can become, and eager to see it reach everything it's capable of. Thank you for bearing with us, and thank you for the money you've put in. Our effort to build shareholder value won't let up. I want to express gratitude to the banks backing us, the directors, the investors, the staff, and the suppliers. Honestly, a huge number of individuals contribute to making a young firm like ours succeed when the technology is still emerging. Having every one of you is a real gift. Much appreciated. We're excited to share our next update once this quarter wraps up. Be well.
This concludes today's call. Thank you for attending. You may now disconnect.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Nauticus Robotics, Inc. transcript - plus 131,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Nauticus Robotics, Inc. earnings transcripts and 131,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.