Home / Transcripts / PyroGenesis Inc. (PYR) · November 12, 2025

PyroGenesis Inc. (PYR) Earnings Call Transcript

November 12, 2025

Toronto Stock Exchange CA Industrials Commercial Services and Supplies earnings 46 min

Earnings Call Speaker Segments

Operator operator
#1

Hello, and thanks for being with us today. You're listening to the PyroGenesis business update call for the third quarter of 2025. <<operator_script>> I want to let you know that this call is being recorded. At this point, I'll turn things over to Steve McCormick, our Vice President of Corporate Affairs. Steve, please go ahead.

Steve McCormick executive
#2

Thank you, Liz, and good morning, everyone. My name is Steve McCormick, and I serve as Vice President of Corporate Affairs at PyroGenesis — thanks for being with us on the PyroGenesis 2025 Third Quarter Financial Results and Business Update Conference Call. Joining me on today's call are Mr. Andre Mainella, the company's Chief Financial Officer, and Mr. Peter Pascali, President and CEO of PyroGenesis. On Tuesday, November 11, 2025, the company released a press release that includes the financial results and business update covering the third quarter that ended September 30, 2025; you can find it on the company's website, pyrogenesis.com. Should you have questions following this call, or if you'd like more information about the company, please send an e-mail to the Investor Relations department, and we will do our best to respond to questions of a public nature that financial market regulations permit us to address. The e-mail address is ir@pyrogenesis.com. Shortly, we will offer prepared remarks that review the operational and financial results for the third quarter. Before that, though, a reminder: this discussion may contain forward-looking information based on certain assumptions, and those assumptions carry risks and uncertainties that could cause actual results to differ materially from historical results or from results anticipated by the forward-looking information.

Steve McCormick executive
#3

Anything forward-looking that gets discussed on this call reflects only the situation as of today and rests on what management currently plans, believes, estimates, projects, expects, opines, and assumes. Nobody can guarantee those forward-looking statements will turn out correct, so you shouldn't lean on them more than is warranted. PyroGenesis accepts no duty to refresh any forward-looking information, nor to clarify any material gap between later real-world events and such statements, unless the law requires it. On top of that, throughout this call we may point you to some non-IFRS financial measures, such as EBITDA, modified EBITDA, and backlog, and those lack a standardized definition under IFRS, so they might not line up with comparable measures or figures that other companies report. To learn more about both the forward-looking information and the non-IFRS financial measures, including how EBITDA and modified EBITDA reconcile, please see the company's management discussion and analysis, which together with the financial statements can be found on the company's website at pyrogenesis.com and on the SEDAR site at sedarplus.ca. Last, a reminder: PyroGenesis reports under Canadian generally accepted accounting principles, or GAAP, in which revenue is accrued not on sales but through a model reflecting the percentage of work finished on a given project within the reporting period.

Steve McCormick executive
#4

This can shift depending on what kinds of projects we have in-house as well as on a client's own choices about scheduling and logistics, and both of those things can affect project milestones and how well the company can book revenue from one quarter to the next. As we've said in earlier reports, the company's revenues will probably be fairly consistent quarter to quarter based on project timing as described above, or sometimes because of cash on hand and a continuously fluctuating economic landscape, clients may run into their own cash flow and CapEx scheduling difficulties, which can affect PyroGenesis revenue. I'll begin the business overview with a quick look at some of the company's top line results for the quarter, then give a summary of some key business activities that took place during the quarter before handing the call to our CFO, Andre Mainella. Later on the call, the company's President and CEO, Peter Pascali, will respond to a series of investor questions submitted during the quarter. Beginning with revenue: for the third quarter of 2025, the company finished the quarter with revenues of $3.25 million, a decrease of 18.7% year-over-year. On gross margin, for the quarter, gross margin came in at 24% versus 42% a year earlier.

Steve McCormick executive
#5

Although it's below average, the company's margin on a 9-month basis is still better than 2024 and is currently at 35% versus 31% for the 9 months of the prior year. Andre will give further detail on these figures later in the call. As usual, to give context for margins by comparing with some of the industries the company serves or supports in the aluminum sector, second quarter margins are reported at 10.4%. Aerospace and defense stands at 11.6%. Iron and steel is at 25%. The mining -- the metal mining industry is showing a 38% margin for the quarter, as is industrial machinery and components, also at 38%. Broadly, across much of heavy industry in Q3, ongoing tariff costs, higher energy prices in Europe and demand swings, particularly in the Far East, have contributed to higher input prices for many of these industries as commodities face shifting global ties and as energy sectors work to bring more electricity and renewables capacity online while phasing out coal. Now on to backlog. PyroGenesis backlog stands at $51.6 million, showing continuing strength in the company's order book. For those who need clarity on backlog, backlog is defined as signed or awarded contracts and outlines future revenues for the company that will be added to the financial results over subsequent quarters as projects are started, or as product milestones are reached on a percentage of work completed basis.

Steve McCormick executive
#6

From management's perspective, a solid backlog does a good job of demonstrating how robust the long-term outlook is. It also illustrates the broad range of contract types the company is able to land — what the company frequently describes as its multi-legged stool identity. So the backlog reflects the minimum revenue coming in the future as those projects move toward completion. Now let's move to a few key production highlights for the second — for the third quarter, pardon me. Keep in mind that projects, or possible projects, that were announced earlier but aren't included in this summary update, the MD&A, or the outlook shouldn't be viewed as at risk. Notable developments can happen at any moment depending on where projects stand, and the information provided reflects some of what is available for some projects, though not all of them. Projects that go unmentioned may — may simply not yet have reached milestones worth talking about, or their status may not have shifted since the prior reporting quarter. Let me begin with a quick reminder of the company's business strategy. PyroGenesis applies its expertise in ultra-high temperature processes to build technology solutions serving heavy industry and defense. From early stage pilot through full commercialization, the company's technology solution set sits within three business verticals: energy transition, materials production and waste processing.

Steve McCormick executive
#7

These three verticals were recently reorganized so they align better with what the company offers and reflect shifts in the business environment. Over the last 5 years, as PyroGenesis has developed, new technologies came on board, some industry terms grew more recognizable and standard, and the company's future opportunities within each vertical became more evident. So, starting with the energy transition vertical, which mainly supplies plasma-based fuel switching solutions that help heavy industry electrify high-temperature processes, adjust their energy mix and cut emissions. In August, the company announced it had signed a contract with Constellium, one of the largest aluminum transformation and recycling companies globally. The deal covers buying plasma torch technology and related components for implementation in an aluminum remelting furnace. That contract launched the Phase 2 industrial implementation stage of the two companies' collaboration agreement from April 2024, which set out Constellium's stated plan to use PyroGenesis plasma torches and associated processes as possible replacement heating sources in aluminum remelting furnaces at Constellium's aluminum cast houses. In September, the company announced a $1.2 million contract with a European cement industry customer to supply a plasma torch system for a calcination furnace. A calcination furnace, also called a calciner, can serve various steps in the cement process, including high-temperature processing of limestone, quicklime and trona to produce lime, clinker and soda ash, all of which can be key cement components contributing to its binding properties, strength and durability.

Steve McCormick executive
#8

When it comes to the cement industry, burning fossil fuels and the CO2 that gets released during calcination are two of the biggest emission sources. As a matter of fact, roughly 40% of the greenhouse gases from making cement stem from combusting the fuel that's needed to produce the heat the calcination process requires. Moving over to the materials production business vertical, that covers building chemical-free systems for producing materials as well as making materials that manufacturers are demanding. In the quarter, the company put out a number of announcements about its fumed silica reactor pilot plant, which goes by FSR. For anyone who doesn't know it, fumed silica ranks among the industrial materials in widest use, and it shows up in thousands of products — cosmetics, toothpaste, pet litter, powdered food, milk shakes, instant coffees, pharmaceuticals, paints, inks, thermal insulation batteries, to name just a few. It's frequently employed as a thickening agent, or else to stabilize an end product and enhance how consistent its texture is and how well it flows. PyroGenesis designed the fumed silica reactor so that it makes commercial-grade fumed silica from courts within one eco-friendly system, and at the same time does away with the harmful chemicals that the conventional production method relies on. PyroGenesis has been contracted to develop and construct the FSR for HPQ Polvere Inc., a subsidiary of the PyroGenesis client HPQ Silicon Inc.

Steve McCormick executive
#9

PyroGenesis holds a 50% stake in Polvere, along with an exclusive deal making it the only equipment supplier for any future commercialization of this process. Several developments over the quarter have helped bring the FSR nearer to commercialization. Early in July, the company reported that material quality, purity and consistency had improved across multiple production cycles at the pilot plant. A leading global fumed silica manufacturer verified these results; that manufacturer had earlier requested, tested and verified first-stage material samples from the FSR pilot plant under a letter of intent. Later that month, the company announced that a third-party analysis had confirmed those previously announced results, further validating the key technical metrics for material samples produced by the pilot plant. Then in September, the company announced that August performance trials and modifications to the pilot plant had produced a 3x increase in material surface area, along with significant progress on a number of essential product parameters. A global manufacturer of fumed silica supplied these results after analyzing the fumed silica sample materials PyroGenesis submitted following the latest round of operational tests. With these results, the surface area of fumed silica from the reactor satisfied the requirement for several commercial grades of fumed silica products, while also demonstrating total elimination of carbon impurities.

Steve McCormick executive
#10

Additionally, during July, the company said it had received a contract for titanium metal powder made through PyroGenesis’s next-gen plasma atomization process. It came from a European firm focused on engineering and material science that specializes in additive manufacturing. That client had already gotten samples of PyroGenesis metal powder and tested them, and this contract represents the first commercial order from that customer. The order covers a Ti-64 coarse cut titanium powder. And lastly, turning to the waste processing vertical, which supports safe, emission-free destruction, remediation and valorization of industrial, chemical, agricultural and municipal waste on land and at sea: in July, the company announced a $600,000 contract with one of the world’s largest integrated environmental services companies for engineering and testing of an advanced waste management solution, aimed at both nonrecyclable plastics and other forms of hazardous liquid waste in Europe, using PyroGenesis plasma gasification technology as the platform. And finally, also in July, the company said it had completed a previously announced $9.3 million coke oven gas valorization and hydrogen production project for Tata Steel, one of the world’s largest diversified steel producers. The systems developed by PyroGenesis subsidiary Pyro Green-Gas are running continuously, 24 hours a day, at the Tata Steel facility in Kalinganagar, India, and the newly reformed hydrogen produced by the system is being reused by other applications around the facility.

Steve McCormick executive
#11

For details on these and other updates and events, along with some of the many ongoing projects we didn't discuss on this call, please see the corresponding section of yesterday's news release, or the management discussion and analysis document—specifically the outlook sections in each. I'll return at the end with some final thoughts. But right now, I'd like to hand the call over to the company's Chief Financial Officer, Andre Mainella, who will provide more details about the third quarter financials. Andre?

André Mainella executive
#12

Thanks, Steve, for that thorough rundown. And thanks to everyone listening for being on the call. I'd now like to move on to a review of PyroGenesis's financial results for Q3 2025, and give a bit more color on the key revenue and expense lines. In Q3 2025, PyroGenesis posted revenue of $3.3 million, which is $0.7 million lower than the $4 million booked in Q3 of 2024. The product line chiefly accounting for that was torch sales, down $0.6 million. The reason was lower project activity stemming from the completion of several major projects last year that were not repeated this period, along with 2025 projects that remain at an early stage. On the biogas upgrading side, revenue rose $0.3 million, as the company keeps advancing a major gas desulfurization project. As for year-to-date revenue, it came in at $9.3 million, a drop of $2.2 million compared with 2024. That decline is explained by the same factors as the quarter, and it goes further, extending to our lower revenue from system supply to the U.S. Navy. The biogas upgrading category offset that drop by contributing $3.2 million of revenue during the 9-month period, which is $2.3 million above what it delivered in the same period of 2024.

André Mainella executive
#13

We anticipate that revenue will improve as project phases move forward with more momentum and higher revenue getting recorded in the quarters ahead. As of November 11, the date these financial payments were released, our backlog of science and/or awarded contracts is at $51.6 million, and we expect that to be recognized into revenue over the next 3 years. It's important to note that most of this backlog is denominated in foreign currency, with more than 80% being in U.S. dollars. Gross profit for the quarter came in at $0.8 million, or $3.2 million year-to-date, and that represents a gross margin of 24% and 42%, respectively. Q3 margins are affected by where the projects currently stand and therefore by the nature of the expenses being incurred. Employee compensation went down and there was more reliance placed on external subcontractors. These stages also incurred additional material costs, which produced lower margins. This is the reverse of what happened in the prior quarter, where project stages generate higher margins with small incremental direct costs. We also want to mention that the company keeps controlling costs and product sourcing on an ongoing and proactive basis, as has been seen in past years. Now let's turn to operating expenses. Selling, general and admin expenses totaled $2.6 million in Q3 2025 and $5 million for 2025 year-to-date.

André Mainella executive
#14

During the third quarter of 2024, we booked provisions for credit losses, and in that same quarter some of those charges were reversed because the related accounts receivables got collected. SG&A costs came down in additional categories as we keep watching expenses, and the biggest favorable quarterly swings were again in employee compensation, at $400,000, professional fees, which fell $250,000, plus insurance, other expenses and depreciation. On a year-to-date basis for SG&A, we saw that same anomaly in the comparative figures. Yet if we strip out the effect of the credit reversal, which came to $3.3 million in 2024, year-to-date SG&A expenses are in fact lower by $2.6 million. And again, the primary factors behind those reductions are employee compensation from lower headcount, share-based compensation, professional fees, together with insurance and other expenses. Once more, we have kept carrying out our cost optimization efforts across every category and improved sourcing. Net R&D expenses for Q3 2025 came to $0.2 million and are comparable to Q3 of 2024. Year-to-date, they closed at $0.9 million and are quite comparable to the $2.7 million we had for 2024. The company keeps benefiting from client funded R&D projects, which qualify for SR&ED tax credits, while further supporting and developing new technologies.

André Mainella executive
#15

Now let's turn to net financial cost for the quarter, which came in at $245,000. That figure sits comfortably inside what we expected. Interest expense and accretion expense tied to the secured loan from May 2025 are new this quarter, though they are offset by comparable costs from the prior convertible loan, which has now been fully reimbursed. In 2024, we also took a hit from an expense related to the balance due on the business combination. Year-to-date financial expense, before net financial income is factored in, likewise falls comfortably within the $800,000 to $900,000 range we anticipated for both the 2025 and 2024 year-to-date periods. Fair value adjustments on strategic investments produced only a minimal expense in the current quarter and in the comparable 2024 period. That stemmed from a decline in the share price of HPQ common shares, which has a direct effect on the investment's value as well as on the fair value of the warrants that PyroGenesis holds. Turning to comprehensive loss, the items just discussed leave us with a loss of $2.5 million, versus a $3.9 million loss in 2024 — a favorable swing of $1.4 million. So while sales and gross profit were lower, reduced SG&A expense produced a smaller operating loss, and lower net financial expenses gave it a further boost.

André Mainella executive
#16

Looking at the year to date, the loss comes in $3.1 million larger than 2024, driven by the noncash loss tied to the change in fair value of strategic investments, plus the fact that 2024 included a $1.2 million gain from a legal settlement. With the quarterly comprehensive loss improving, both EBITDA and modified EBITDA improve by $1.1 million. This metric, then, gives investors a clearer picture of how our operations are performing financially, while leaving out factors beyond our control as well as other noncash items. That concludes the financial section for Q3 2025. Steve, I'll turn it back over to you now. Thank you.

Steve McCormick executive
#17

Thank you very much, Andre. At this point we're going to move forward with a set of prepared responses to questions that came in to the company over the course of the quarter. Providing those answers will be Mr. Peter Pascali, who serves as President and CEO of PyroGenesis. Please go ahead, Peter.

Photis Pascali executive
#18

Much appreciated, Steve. At last I have a speaking part, everyone. Many thanks. So what I'll be doing is taking a set of questions that come up often or that specifically surfaced lately. First question: what can you share regarding the super high temperature torches — in particular the 4.5-megawatt and 20-megawatt units that were announced a couple of years back? For anyone new to the story, on August 1, 2023, we announced a contract for a 4.5-megawatt plasma torch with a client that serves as a prime contractor for the U.S. government, and also for public and private customers in aeronautics and defense industries. That project is coming along very well. Engineering and fabrication are both finished. Assembly of the torch is underway. I saw it at our factory not long ago. It measures roughly 6 to 7 feet in length. And we expect to deliver the torch and have it tested at our client's facility in early 2026. Turning to the 20-megawatt torch, that contract was announced a little more than a year ago. It involves the same client, runs about 3 years, and is likewise moving forward — currently in the engineering and electrical design phase as we speak.

Photis Pascali executive
#19

We also observed that, when the announcement was made and according to our own investigation, no one had ever manufactured this 20-megawatt torch — this plasma torch — on a commercial basis. That represents an enormous jump in power and performance, whether for us, for anybody else, or for the industry as a whole. In 2020, our top output was a 900-kilowatt torch. Well, since then, in only 5 years, through this particular project we have increased torch power by over 20 times. On to question number two: what details can you share regarding the hazardous refrigerant destruction system that was sold to New Zealand? As background once more, in late 2022 and early 2023, we announced the sale of one of our large systems, which we refer to as SPARC. SPARC is short for Steam Plasma Refrigerant Cracking technology. This system is used to safely destroy hazardous and end-of-life synthetic refrigerants, for example CFCs, HFCs and HCFCs, typically coming from air conditioners and fridges. The buyer was an organization in New Zealand that has been entrusted with collecting and disposing of these kinds of refrigerants. This matters for New Zealand because at present there is no existing method on the island. As a result, these hazardous materials have to be stored before being shipped to, I believe, Australia, for destruction.

Photis Pascali executive
#20

The client constructed a separate, standalone plant for our SPARC system, and that facility has been in the building phase for some time now. That project is currently approaching completion. In fact, as I speak right now, we have personnel at the site in New Zealand carrying out final assembly and commissioning. The aim is to run the first batch of hazardous refrigerants through it prior to year-end — that's year-end 2025. On to question three: what's the status of the titanium metal powders business line? There's been no news on that front for a good while. In addition, you were certified recently for your coarse cut powder — so what has happened regarding the fine cut? The first thing I'd note on that is that a number of investors have observed that, broadly speaking, we haven't issued any project news for a short stretch. The explanation is — and I'm straying a bit off topic here — partly it's because of the private placement we are in at present. It's a private placement that has been made public. I believe I put in approximately $3.5 million. I think that — I think I essentially purchased the speaking role. What I mean is, it appears I'm permitted to talk now that I've put in $3.5 million.

Photis Pascali executive
#21

Anyway, that financing is still not done. And while a financing is underway, regulators are not especially keen on you releasing any kind of news, since they worry that certain people might be trying to stir up enthusiasm for the stock among the audience, and such news could influence folks favorably. So unless something is truly, truly material — I mean materially significant to a real degree, in which case we would have to put out a press release immediately — it's frowned upon to issue news during this window. That said, we have not put out general news for that reason. It isn't that we're staying quiet or anything like that. Regarding the titanium powders broadly, you can be sure there has been considerable activity that we hope to be announcing over the next little while. We receive many comments and questions, especially since being named an official supplier to a very large global aerospace leader. And then comes the question of why no follow-up news has appeared. Again, as a side note, you might observe that we don't use their name in public announcements. It's important to note that we don't appear to be — it matters that we — it matters to them that we avoid using their name and avoid appearing to ride their coattails for publicity.

Photis Pascali executive
#22

The company itself keeps extremely tight restrictions on how its name can be used. And to do that over and over, we would need to secure their permission each time, and that simply takes far too long. So in order to steer clear of using their name entirely, we avoid it. More precisely, we rely on a broad descriptor, which means no approval is required. As for what has been going on since they certified us, aerospace firms are very big organizations, and they run numerous divisions and business units. Every one has its own procedures, and it has taken a number of months, as a newly appointed supplier, for our official status to be passed around among the customers' assorted lists and project hubs and the like. And certification — certification does not mean guaranteed orders. It merely places us in a strong position to win them. It places us on the roster of approved suppliers. For every project needing the metal powder, an RFQ, or request for quote, gets issued, just to give you a picture of how it works. And the certification lets us compete for the project against other firms. 3D printed metal parts remain at a very early stage of adoption, even with this global leader.

Photis Pascali executive
#23

So as usage increases, we will be in a very strong position to serve them. In fact, we just got our first RFQ from them for a possible powder order, and we've replied, and we hope to make an announcement very soon. On the topic of coarse versus fine cut: yes, our fine cut powder remains in the certification path. Our coarse powder was approved. But the fine powder is still in the certification path. Some of you might recall that the fine cut was initially meant to be the first powder qualified with this customer. However, they altered the technical specification of the powder, requiring every supplier to meet the new specification, and so it delayed the process somewhat. Without getting too technical, the allowable properties of the metal were made significantly different, and each supplier of the metal, since they each use different technology, had to figure out a way to adapt to the change. We eventually figured this out for our next-gen system to meet this requirement. In the interim, the popularity of coarse cut powder has grown quite a bit over the last years.

Photis Pascali executive
#24

We've reached a stage where demand for those two cuts is nearly balanced, and that matters a great deal to us, since it shows the fine cut isn't the only top-tier product — the other one we'd simply been holding as side inventory. In a powder run, demand is now equal — meaning we need matching quantities of each. That puts us in a much stronger position once orders start coming in and we begin powder runs. Printer hardware, meanwhile, has advanced enough that coarser material can be used just as effectively as the finer grade. So being certified with fine cut carries less weight than it used to, regardless. We'll soon send the customer another batch of fine cut powder samples for final testing and analysis, and assuming things unfold the way they have previously, the outcome should be positive. It probably goes without saying that we've also been reaching out to a number of other prospective clients, and we're hoping to share announcements about those very soon as well. How is the broader energy transition movement progressing — sorry, question number — whichever question number 4 is. How is the broader energy transition movement progressing, particularly regarding what appeared to be an opportunity in the mining and iron ore sectors, but which seems to have cooled?

Photis Pascali executive
#25

I really appreciate that question, since it touches on several topics I care deeply about. The challenge with the iron core business is that it swings around a great deal, and rather sharply at that. Both demand and pricing rise and fall. It's an extremely volatile sector, driven by the ups and downs of worldwide steel demand, supply constraints, and geopolitical turmoil. Alongside that volatility comes variability in those companies' readiness to invest. As a result, they frequently reduce or halt capital expenditures in step with the broader turbulence. Bear in mind that these are enormous, far-flung international corporations that have existed for 100 years or longer. Their outlook spans the long term. Thus, a capital spending slowdown lasting a few years carries no weight for them—it amounts to merely a temporary dip. For investors who are somewhat new to the company, it was the iron-ore sector that initially launched, together with us, the possibility of broad plasma adoption in industrial furnaces. That marked our first glimpse of how our torches might be used in this specific manner. Within the iron ore business there is a process known as palletization, which relies on a furnace to heat their small pellets, and around 2020 or thereabouts testing was carried out for deployment in those furnaces.

Photis Pascali executive
#26

And then we went on to sign agreements with major international firms to test our plasma torches, and one customer is even now running trials on a live furnace at their site. Back then, we didn't really realize this signaled a wider industrial push toward decarbonization. And that's really the crux of the question being asked. It's a key part of my answer. The pelletization furnace opportunity was more or less a one-off effort for us, but what it actually did was show other industries and ourselves that plasma, in a broad sense, was genuinely an alternative to gas burners. And as you can see, that has been a real boost for us over the last year especially. And those other industries, aluminum and cement above all, have gone beyond the iron ore pelletization opportunity simply because they have more separate processes that can use plasma. Our latest — our biggest energy transition contracts have been announced with the titans of the aluminum sector, Norsk Hydro and Constellium, to name two. GE Vernova is also part of that. And this year has brought the emergence of the cement industry and its various processes, particularly calcination, which is a high-temperature process for raw materials such as limestone, and processing raw materials like limestone also offers visibility for us.

Photis Pascali executive
#27

We continue to see strong opportunities in iron ore and the wider mining sector. However, before they get their act together and enter the next spending cycle, aluminum, cement, as well as chemical and steel, will have demonstrated clearly what is achievable in heavy industry when it comes to plasma torches. With any luck, we'll be able to share announcements about this soon. This relates to something my long-term investors, or those who track the company, have heard me mention: one of the distinctive aspects of PyroGenesis is the multi-legged stool model we employ. When you examine PyroGenesis, what you're seeing are several applications of plasma torch that are independent from one another. It's similar to a stool with multiple legs. If one leg slows, the others remain available to support us. In that sense, we are reducing the company's risk through this strategy. Essentially, when you look at PyroGenesis, what you're seeing is a mini fund of plasma opportunities. I raise this point here because this is how it plays out — iron ore pelletization is slowing down its capital investments.

Photis Pascali executive
#28

However, since our tool is small, the others—Constellium and Norsk Hydro—are getting underway and demonstrating significant potential. I believe I've addressed that. I can't recall what the question was. Anyway, on to question number 5. Recent news releases have drawn attention to the fact that you're emphasizing the word defense alongside heavy industry—is that intentional, and could you say more? Yes, it was certainly intentional. Interest from the defense and military sectors in our technology has grown substantially over the last few years, to the point that designating this as a distinct target market is clearly warranted. In fact, their interest spans a range of our offerings, encompassing opportunities in waste destruction and, specifically, chemical warfare agents, high-temperature propulsion and protection, and titanium metal powders, believe it or not. Naturally, a great deal of secrecy can be involved in defense applications. So quite often we'll need to be discreet in how we talk about these opportunities and any contracts that arise, but we view this as a major leg for the company going forward. As we noted in the outlook section of the Q3 earnings documents, we recently signed a teaming agreement with a major defense contractor for the potential sale of chemical weapons destruction systems.

Photis Pascali executive
#29

There's additional material here that we hope to cover in greater depth soon, though confidentiality—the confidential reason will likely prevent us from going into much significant detail, but we'll share as much as we can about how this progress is going. Question number six. Based on the speaker abstract, you're presenting at an industry event in March, and it seems that findings from a project Pyro carried out together with two major aluminum companies will be presented. Can you shed any light on this? Yes, the two aluminum companies being referred to are our Alcoa and Rio Tinto. And it's quite interesting how this gets around. Yes, one of our top engineers will be attending the annual conference of the Minerals and Metals Society, or TMS. TMS, by the way, is one of the oldest organizations in heavy industry, I think dating back to like the 1870s. He will be part of a group revealing the results. It will be a group of himself, Alcoa and Rio Tinto, revealing the results of a major test campaign we conducted for use of plasma in aluminum melting and casting furnaces. And as I said, this is what we did, the three of us together, PyroGenesis, Alcoa and Rio Tinto.

Photis Pascali executive
#30

Two of the largest aluminum firms globally. People from those firms are going to attend the TMS conference, and one of those individuals is going to present the group's findings. We have written a technical paper. As I recall, it will come out the day prior to the event, which takes place from March 15 to March 19 in San Diego. This is quite thrilling for a number of reasons. But in effect, we are under a gag order regarding the specifics. We are unable to discuss it. They want it to be done at that time. And unfortunately, we don't want to spur the presentation. But the abstract is available on the tms.org website, if you want to go find out a little bit more about yourself, but it won't give you enough of the details, but I think there's a positive statement, a general positive statement about something in there, but it won't give you the huge details. But this is what the question is referring to. And we're very proud to be part of that group, and we're very happy with the results. Question six. The film silicon reactor project has built up a lot of momentum, but are you confident you can reach the targeted material surface areas that are the minimum standards for commercial fumed silica?

Photis Pascali executive
#31

Suppose it does work — what does deployment look like? Would you be selling your systems outright? Or does a licensing arrangement come into play, and so on and so forth? All right. My understanding is that HPQ issued a press release this morning discussing some recent results. I certainly hope that's the case, since it won't be happening anytime soon otherwise. So yes, there's definitely been momentum, and I'm certainly confident about results down the road. In my view, our process for making fumed silica ranks among the finest things we've ever come up with. Full stop. It's genuinely, genuinely strong. And credit goes to my engineers and the team for pulling it off in what was quite a record timeframe. Results are excellent. The attention we're receiving is excellent. Regarding what lies ahead — look, every option remains open when it comes to commercialization. Because the technology and its design are so flexible, we're able to weigh multiple paths. Which one ultimately becomes the main route is too early to determine, but rest assured the decision will hinge on maximizing shareholder value. We have our — I believe what was released was our test Series 7 test results. And if that isn't the case, they'll be released very soon. General question, question number — I think we're at number 8 or thereabouts.

Photis Pascali executive
#32

This question comes up a lot, along with a few other pretty absurd ones—and yes, absurd questions do exist out there. If you visit some of those websites where people pose these questions, you'll find them. But we frequently get asked, when people hear about our torches or big orders, what's our production capacity? Do we have the resources? And when will we need to buy—or build—a whole new manufacturing plant in order to scale, and so on. A great deal of our manufacturing is outsourced. We structure it so that nobody really has a clear picture of what's being done, and then we assemble the pieces either at our own site or, more often than not, at the client's site. Take DROSRITE, one of our business lines, as an example—I honestly can't recall the last time we built a DROSRITE system in Canada. Every one we shipped to Saudi Arabia, roughly 7 to 10 of them, was built elsewhere and then sent to Saudi. So with that sort of manufacturing approach, our existing facilities will serve us well for a long time. We could reach—I don't think we've actually run the numbers, but hundreds of millions of dollars wouldn't shock me before we'd even begin discussing expansion.

Photis Pascali executive
#33

On a personal level—and I believe my Board shares this view—we're not especially keen on running our own manufacturing plants, since that creates constant pressure to keep them fully utilized. Given how industry demand rises and falls, it's preferable to rely on somebody else's production capacity, especially when spare manufacturing capacity exists out there. That approach serves us well. Now, turning to the questions we've answered: we received, and keep receiving, a great many inquiries about particular projects. However, given the stages those projects are at, we're unable to say anything at this point. That said, please keep your questions coming, and whenever we notice a question that comes up often, we'll do our utmost to address it. Should it be confidential and not yet the subject of a press release, we'll endeavor to work it into a future press release if it's asked frequently enough. Once more, though, I want to thank each person who sends questions—please keep them coming. If you don't hear back from us, that's because your question is one whose answer can't be shared with a single individual. As I mentioned, we'll try to fix that. If enough people ask, we'll attempt to work it into a press release on that topic, or frequently it's a situation where capital markets rules prevent us from answering for one reason or another.

Photis Pascali executive
#34

That brings us to the end of the Q&A session. Thanks for joining us on this call. At this point, I’ll hand things back to Steve. Thank you, Steve.

Steve McCormick executive
#35

Peter, thank you very much. It's wonderful to hear from you and to gain some understanding of the projects currently underway. So to wrap up, the company — on behalf of the Board and on behalf of Peter — wants to voice its ongoing confidence in the strategic direction it has chosen. As Peter noted in yesterday's news release, focusing the company on innovation is the right strategy. Operating as a small cap or microcap business within the industrial technologies sector definitely brings its difficulties, yet the company strongly holds the view that this innovation first approach generates the kinds of daring choices that result in the creation of advanced technologies that we believe hold a long future — from producing titanium powder and fumed silica, to building hyper powered plasma torches for industrial applications that grow ever more demanding and now aerospace ones as well, to designing systems that safely remove an expanding array of hazardous materials in order to protect people and the environment alike. These are breakthrough technologies founded on more than 34 years of research effort, and we are not stopping. For Q4, encouraged by the recent financing, the company is focused on delivering a strong finish to the year and setting the stage for 2026. So stay tuned for more information over the coming days and weeks.

Steve McCormick executive
#36

We’re eager to bring you further updates very soon. Also, a reminder—as Peter mentioned—to send any questions you might have regarding the company and its projects by e-mail to our Investor Relations department at ir@pyrogenesis.com. Once again, thank you for tuning in, and enjoy the rest of your afternoon. Operator, kindly conclude the call.

Operator operator
#37

That brings us to the end of today's conference call. Thanks for joining us. You can disconnect now.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete PyroGenesis Inc. transcript - plus 133,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to PyroGenesis Inc. earnings transcripts and 133,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.