Home / Transcripts / USA Rare Earth, Inc. (USAR) · November 6, 2025

USA Rare Earth, Inc. (USAR) Earnings Call Transcript

November 6, 2025

NASDAQ US Materials Metals and Mining earnings 35 min

Earnings Call Speaker Segments

Lionel McBee executive
#1

Operator, thank you. Hello, everyone, and good afternoon. We're glad you could join USA Rare Earth's call about our third-quarter 2025 earnings. Joining me are Rob Steele, our Chief Financial Officer, and Barbara Humpton, our Chief Executive Officer. Our fiscal 2025 third-quarter results came out earlier today. The 10-Q, the earnings release, and the slide presentation are all available on our website, usare.com, under Investor Relations. Barbara and Rob will first go over the quarter's results and business updates, and then we'll take your questions. On this call, we might share forecasts and other statements about what lies ahead, made under the safe harbor protections set out in the Private Securities Litigation Reform Act of 1995, concerning upcoming events or how the company's finances will perform in the future. Such statements could address our business, the economic and market picture, expectations for growth, newly introduced products and how they do, our cost structure, and our business strategy. Forward-looking statements rest on information we have right now as well as management's beliefs, assumptions, estimates or projections. They are not promises about how things will actually turn out and carry certain risks, uncertainties and other factors. We point you toward the documents the company periodically submits to the SEC, in particular its Form 10-K and Form 10-Q. The materials list key elements that might lead real outcomes to diverge significantly from what our forecasts or forward-looking statements suggest. Every remark on this call reflects conditions only as they stand on this date, November 6, 2025, and unless the law demands otherwise, the company clearly states it has neither plans nor duties to revise any forward-looking statements given here in light of later developments or situations. Having said that, I'll now hand things over to Barbara. Barbara?

Barbara Humpton executive
#2

Thank you, Lionel. As USA Rare Earth's new CEO, this marks my debut earnings call, and it's an honor to steer this organization through such a decisive period. What we're tackling, in my view, is the quintessential commercial problem of our time. To me, this undertaking carries mission-critical weight. Over the past three decades, the West has come to recognize the harsh truth about just how perilously unstable rare earth supply has grown, how essential these substances are across every part of our economies, and the extent of our reliance on China for meeting these vital requirements. Here at USA Rare Earth, we're pushing hard to remove that lone vulnerability, broaden sourcing options, and in the end strip away the geopolitical sway, all for the good of America and its partners. We hold a strong capital position, carry no debt, and aim to steer our sector ahead. Our ambition is to be the preferred ally throughout the value chain: putting money in, teaming up, and merging to reconstruct the proprietary technologies that shape what's ahead. I've now spent a little more than 1 month in the CEO role; in that period, I've toured our American locations, gotten to know the LCM crew in the U.K., and listened to many clients and stakeholders. You're familiar with our mine-to-magnet approach; however, today, allow me to walk you through it from magnet back to mine and offer my takeaways. Starting with magnets. At our Stillwater magnet production site, I encountered David Bushi and his group of engineers who are putting together Line 1a and getting set for commissioning. David's approach is thorough, and his team is performing admirably. The whole building, from the production area all the way to the main entrance, is undergoing revival. Our magnet sales funnel looks robust. And though plenty of you want to know which customers we're working with, I'm sure you grasp why we must keep things confidential. What we're engaged in is extremely delicate, for both national security and business reasons; shortly, Rob will provide further details. For now, though, I'll shift to the following part of the chain, which is metals. Buying LCM, Less Common Metals, forges a distinct edge in competition and boosts our capacity to generate revenue. This deal is transformative, greatly speeding up our plan and building out a completely integrated rare earth supply chain. Thanks to LCM's demonstrated track record, we picked up over 30 years of unmatched know-how in producing metals and alloys, locking in raw material for our Stillwater operation and supplying a vital component, bridging our home mining efforts with our magnet output further down the line. LCM will keep supplying metals, alloys, and strip cast to its other clients. Among its key products is samarium, which the U.S. Geological Survey just ranked as the #1 critical mineral facing the greatest danger of supply chain weaknesses. LCM's capacity to manufacture samarium, along with samarium cobalt, is essential for areas such as defense and medicine. Thanks to Grant Smith and his expert team, we are also tackling the lack of skilled workers in metal production by starting an apprenticeship initiative designed to educate American metal makers, passing along vital know-how to restore the country's rare earth supply chain. Essentially, this deal brings together homegrown resources, cutting-edge technology, and top-tier personnel. We are still set to finalize it prior to the end of the year, and we are eager to bring the outstanding LCM group into our company. Now let's turn to processing. Grant Smith is currently highly focused on the upstream feedstock sources that will supply the oxides required for making metals and alloys. That is why I was delighted to get acquainted with the processing crew at USA Rare Earth. Ben Kronholm oversees the midstream R&D laboratory located in Wheat Ridge, Colorado, where we keep advancing our patented rare earth extraction and purification methods. This cross-functional integration sets us apart within the sector and lets us generate value for our stakeholders. That leads us to mining, and at Round Top Mountain, which holds North America's biggest deposit of heavy rare earth and other critical minerals. We just shared that Alex Moyes has become our new VP of Mining, arriving from Ramaco; we are building a group possessing solid technical abilities, hands-on operational background, and a mutual commitment to establishing a robust rare earth supply chain based in the U.S. Their work is transforming this vision into reality. And within this framework, turning vision into reality, we have a number of significant milestones we are happy to share concerning our processing and mining efforts. The initial one concerns recycling. Our Wheat Ridge laboratory has now moved our swarf recycling flow sheet forward via bench scale testing, yielding encouraging outcomes. This lets us start advancing toward pilot scale testing of our recycling flow sheet during the first quarter of 2026. Being able to recycle our own swarf, meaning we reuse scrap material left over from finishing magnets, is a crucial capability for establishing a circular supply chain and improving the efficiency of our operating costs. Next, following our effective leaching and SX piloting, we are now excited to kick off the pre-feasibility study stage of the Round Top development project; this is especially thrilling since we are advancing to the PFS phase with our toughest SX circuits derisked at pilot scale. We aim to finish our PFS near the third quarter of 2026. Finally, while piloting these SX techniques, we discovered that alongside our heavy rare earth separations, we had also extracted and isolated hafnium. Hafnium finds use across several strategic sectors, such as advanced semiconductors, nuclear reactors, and aerospace materials, which further expands the range of what we offer. As you can see, this initial month has been packed, and I am encouraged by everything I have witnessed thus far; and it is the people who truly count. When it comes to getting me up to speed, nobody has pitched in more than my finance counterpart, Rob Steele, who serves as CFO at USA Rare Earth. His experience lines up perfectly with what this incredible period of change demands. I'll now pass things over to Rob, and he'll walk you through further specifics regarding the business.

William Steele executive
#3

Barbara, thank you. Everyone here on the leadership team would agree that the vision you've laid out and the momentum generated up to this point are a real inspiration to us. It's genuinely thrilling to be involved in this mission at this moment. Cash is where I'll start, and it remains solid — over $400 million as of November 3, 2025. Add in the exercise of the investor warrants still outstanding that relate to the redemption notice we sent out last week, and that's another $123 million coming our way. A balance like that gives us both the flexibility and the liquidity to execute and accelerate our magnet-to-mine approach as we secure, reshore and grow. When it comes to the magnet business, we're still looking at demand climbing by thousands of tons for 2026, and even more so for 2027 and later. That spans a lot of sectors — agriculture, industrial, defense, medical, and others — along with rapidly expanding fields like drones and data centers, both of which are expected to double or triple in size across the coming decade and will require huge quantities of precision-engineered micromagnets featuring advanced surfacing. The question we hear from customers over and over is how quickly we can get production up, and that tells you just how strong the appetite is for magnets manufactured in the United States. Given how much cash we have on hand, the wide range of demand we're seeing from customers, and a pipeline that keeps expanding through 2026 and past it, we're accelerating the timeline on our expansion initiatives, both for production capacity and for staffing. Those initiatives include upgrading our magnet finishing operations so that we can satisfy the specs customers require in a variety of sectors, increasing what we're putting into Line 1b so that Line 1 can scale up to 1,200 metric tons, and delivering additional improvements that face customers at the Stillwater magnet plant. In total, completing this extra scope of work ought to cost us about $100 million. On top of that, we'll put money into our workforce and bring on new hires as we get ready for commissioning in Q1, and we'll reinforce our foundational infrastructure — systems and cybersecurity among them — so that we're operationally ready. In September, we shared news that we were buying LCM. This deal brings benefits throughout our whole supply chain. It speeds up our strategic plan by a large margin and gives us something special: metal making capacity outside of China that serves America, our partner nations, and — this matters a lot — it turns into our source of strip cast material for the Stillwater plant. Right now, LCM can produce 1,500 metric tons of NdFeB strip cast, and we expect that figure to reach 2,000 metric tons as we head into 2026. We're going to put money into LCM and grow what it can do, plus we'll gain more from the experience curve effect as LCM scales up with us; our plans include building out LCM's operations in the U.S. and U.K. We also intend to serve the wider industry outside China, spanning numerous defense and industrial uses, by expanding into Europe. Part of this involves setting up a facility in France for producing strategic light and heavy rare earth metals and alloys, which leverages LCM's solid ties with governments and customers in the supply chain. As these initiatives take clearer shape over the coming quarters, we're excited to share further details. Building on Barbara's comments, we expect to complete the acquisition of LCM prior to the end of the calendar year, provided the standard closing conditions are met, among them securing regulatory clearance in the UK. Regarding formal guidance for 2026, we're looking forward to offering that once we release our fourth quarter results in early 2026. Until then, our sharpest focus is on expanding magnet output and making sure we can flex to match what customers need. We're likewise working on locking in the metal supplies required for the growth we've projected in 2026 and afterward. Our approach to feedstock includes material both mined and recycled from outside China through the LCM deal, letting us build the foundation for steady supply into 2027. On the operational side at Stillwater, within the coming weeks we'll start feeding metal through to test our initial manufacturing line; that marks an important milestone, letting us confirm our supply chain and qualify raw materials using commercial-scale equipment, and it sets up commissioning in Q1 2026, which is still on schedule. Now, on Round Top and Wheat Ridge — given the results we've seen from bench and pilot testing, we're going to begin funding our PFS in the fourth quarter of 2025, and then in the first quarter of 2026 we'll direct capital toward our swarf recycling pilot. And with the faster pace of spending on Line 1 and Round Top capabilities, our adjusted ongoing operating expenses for Q4 2025 are now projected to fall in the $13 million to $15 million range. For the third quarter of 2025, operating expenses were $15.9 million. On an adjusted ongoing basis, that quarter's operating expenses reached $8.9 million, once you back out M&A-related expenses, stock-based compensation and severance costs. Net loss attributable to common stockholders was $156.7 million, or $1.64 per share; that figure includes a noncash fair value adjustment of $142.4 million tied to our warrant and earn-out liabilities. Leaving that out, adjusted net loss stood at $14.3 million, or $0.25 adjusted net loss per share, which in our view better reflects how our core operations performed. Moving forward, we'll supply this adjustment to help with your analysis of our results; the quarter closed with $257.7 million in cash and no meaningful debt, which puts us in a good position to hit near-term milestones, complete the LCM acquisition and speed up our manufacturing capabilities. In closing, the company's balance sheet is still strong. We are deploying capital carefully and selectively to support growth that can scale over the long term at attractive returns, while meeting demand from a customer base that keeps growing. At this point, we have the financial flexibility to consider lower-cost funding choices for subsequent stages, and we anticipate improvement in our cost of capital as execution continues. Barbara, over to you for the closing comments.

Barbara Humpton executive
#4

Thanks, Rob. So this is what we're going to deliver. The industry may be under the geopolitical microscope right now, but our attention stays on the things within our control so we can seize the market opportunity. Every one of our key initiatives is moving forward with precision. Disciplined execution of our plan is what we're here to do. We're grateful for your outreach. Since the LCM acquisition was announced, a lot of you have reached out. You see the rare chance we have to reshape the supply chain, and you also see how we're going about it: open, collaborative and trustworthy. Our aim is to be the partner of choice in this sector. The growing attention on critical rare earth just confirms what we're building: a fully integrated U.S.-based rare earth material and magnet platform that backs national priorities, delivers supply chain stability and creates long-term value for our shareholders; we're operating where global necessity meets technological innovation, at a level not seen in decades. The plain fact is that industries around the world cannot reach their ambitious goals without a stable supply of rare earth materials, and USA Rare Earth is helping to make that happen; but we can't accomplish this on our own. As I've stated publicly, networks beat hierarchies. We're working with partners across industries and governments to build an ecosystem that guarantees a reliable, sustainable supply for America and our allies. Being part of this mission makes us proud, and the scale of what lies ahead energizes us. Operator, let's open the line for Q&A.

Neal Dingmann analyst
#5

My first question concerns the magnet facility. You all noted in the prepared remarks that you're on schedule for commissioning commercial scale production in the first quarter of next year. I was just wondering, could you talk about, Barbara or Rob, which steps remain before that can happen? And what else will be required after that to get all of Line 1 up and running?

William Steele executive
#6

Sure. This is Rob. I'll handle that one.

Barbara Humpton executive
#7

Over to you, Rob.

William Steele executive
#8

As far as that line goes, success now hinges on how well we carry things out. Two major components matter here. First, we need the equipment in place and functioning, and that will wrap up during Q1 within our commissioning work. Second, there's the human side — getting trained engineers and manufacturing staff ready to run the line. Those are the two main areas demanding our attention right now. We remain on schedule, as previously stated, to finish — basically finish getting everything ready for premanufacturing by the start of — close of Q1, start of Q2.

Neal Dingmann analyst
#9

That sounds excellent. Now for my next question, regarding LCM. I realize the transaction is not final at this point, but could you talk about the reasons you feel assured that LCM can obtain the oxides it requires in a prompt manner moving forward?

William Steele executive
#10

Absolutely. During our due diligence, one thing mattered greatly to us, and that is precisely this: their capacity to procure the various rare earth oxides plus other critical minerals essential for backing both our own operations and what their clients require. Consequently, when you consider their future activities and their track record, they will provide material to us, to third-party magnet producers, and additionally furnish samarium along with samarium cobalt to the U.S. government. Furthermore, every one of those supply sources presently originates in Europe, and we believe that will be enough to satisfy our needs for at least the coming 12 to 18 months.

George Gianarikas analyst
#11

Hi, Barbara. To kick things off, I realize you have to be careful when discussing the customer conversations you're currently engaged in, but could you perhaps provide a bit of form and shape regarding which end markets they might be in and how wide in scope some of those discussions are?

Barbara Humpton executive
#12

Yeah. Let me chime in on that. Rob, apologies, allow me to quickly chime in with a few details about those customer segments. The thing we should probably be focusing on most at this moment is that the defense sector is our priority. So, discussions with top aerospace companies, and especially the innovative front runners who must guarantee dependable supply. Of course, we're all aware that aerospace makes up a modest portion of the addressable market, yet we give it priority given how critical it is. Beyond that, we're truly happy with the feedback coming from both automotive and the agricultural sector. Looking ahead, a couple of the more intriguing developments are in the growing energy sector. And as Rob mentioned in his remarks, the specifics tied to semiconductors along with data center. Rob, apologies, I cut in on you.

William Steele executive
#13

No, that's wonderful, that's ideal. And George, when you examine the demand curve and total demand, we simply lack sufficient capacity for supplying what's needed in 2026. And definitely, if you watch that demand curve grow in '27 — actually, ours stretches all the way to 2033. Our job must be putting money into capacity and capability so we can satisfy that need across a broad range of magnet types. So that is precisely what we are doing.

George Gianarikas analyst
#14

And perhaps building on that, when you look at the capacity you're attempting to establish, you said before that clearly there's a constraint on capital equipment plus a constraint on human capital — between those 2, which one is tighter and harder to secure?

William Steele executive
#15

I'd say both matter enormously, and both are things we need to address. That said, planning for capital equipment is somewhat simpler, and we must plan ahead for it since certain pieces of equipment may take up to a year to show up; because of that, we're already examining Line 2; so we're preparing there to possibly proceed with it, ensuring we possess the machinery required to grow past 1,200 metric tons and reach 2,400 metric tons during the 2026-'27 time frame. So that's one aspect, though it's relatively forecastable. On the human capital side, it truly comes down to — once more, it's about execution and ensuring you plan ahead so that you have enough personnel to operate the equipment at full scale. And we're currently doing that at our facility and putting together additional plans to grow considerably ahead of the capacity we have launching.

Derek Soderberg analyst
#16

I'd like to add my congratulations to Barbara too. Barbara, I'll begin with you. You said the LCM acquisition should be completed by the end of the year. Yet given how strategically important this deal is to the armed forces of both the U.K. and the U.S., I'd guess there could be extra hurdles involved. As much as you're able to say, is there close coordination between the American and British governments regarding this deal? Also, how confident are you that it will in fact be completed? I have one more question after that.

Barbara Humpton executive
#17

Yes, thank you, Derek. That's a good question. Yes, our confidence here is actually high. At the moment, the U.K. government will naturally conduct its own national security interest determination. We aren't seeing any indications of problems there. In fact, the close coordination between our two governments is visible in the work they're already doing together, especially in the critical minerals sector. Our view is that growing in the U.K. is the right initial move as we aim to genuinely scale this capability beyond China; so LCM has already started. Just as we're building ahead of demand for the Stillwater facility in Oklahoma, they are preparing for greater demand on their operations. And in fact, Grant Smith has been traveling around the world, engaging with all of his stakeholders to make sure everyone grasps, in particular, the value proposition of scaling this business and enabling LCM to keep serving the needs of the entire competitive field. This is an area in which LCM will have a wide range of customers, extending even beyond those our magnet-making capability will serve.

Derek Soderberg analyst
#18

Understood. That helps. Then, Rob, my understanding is that previously — tell me if I've got this wrong — the approach was essentially a cost-plus arrangement for magnet agreements. Under that approach, would the entire plant overhead along with direct labor be included in the target gross margin you mentioned? And after that...

William Steele executive
#19

Yes, that's right. Yes, that's right.

Derek Soderberg analyst
#20

Understood; and could you assist us in roughly breaking down the variable and fixed costs, perhaps for the initial 1,200 tons or for the first line once it's completely operational, or maybe it's simpler to handle for the entire plant as we get close to production? I'm curious whether you could give us some insight into the estimates for variable and fixed costs.

William Steele executive
#21

Yes. Allow me — I don't currently have those figures available. We'll get back to you on that. I'd be glad to do so.

Subhasish Chandra analyst
#22

About your question — you mentioned being at ease with oxides. I'm wondering whether that same comfort carries over to the heavies, and given the LTM relationship and what I take to be your broadening customer base, where does the heavy investment sit? How comfortable are you on that front?

William Steele executive
#23

Right. So when it comes to heavies and sourcing on a global basis at this moment, like I said, looking at the capacity that exists worldwide for heavies today, we have a strong feeling that what's available now is able to serve our needs across the coming year to 18 months. Running alongside that, heavy capacity is being increased in quite a few locations, starting with upstream feedstock, and it keeps growing. At the same time, processing capability is getting scaled up in multiple locations; that capacity still needs to be established for turning heavy rare earth concentrates into oxide. Even so, given how many different possible sources outside of China there are, we're confident we'll have heavies available to keep supplying us down the road. It's well beyond a small number of projects underway that will deliver those heavies. So the picture is an ex-China build-out happening worldwide, alongside today's capabilities and the investments currently in motion.

Subhasish Chandra analyst
#24

All right, understood. Then regarding the PFS — so the PEA — was that from last time? First, does that PEA still hold? Does it require any updating whatsoever? Or ought we simply treat it as a fixed constant prior to starting a PFS?

William Steele executive
#25

Right. What I'd say is that PEA isn't ours. It belongs to TMRC. Our perspective has consistently been that it serves as a broad reference point regarding which minerals are present. However, our flow sheet differs from theirs — it's a separate flow sheet. Consequently, the economics we're evaluating diverge from what appears in that PEA. So my take is that it's useful, yet it truly doesn't pertain to how we intend to generate economics from the heavies and critical minerals at Round Top.

Subhasish Chandra analyst
#26

All right, understood. So we ought to hold off until your PFS comes out for...

William Steele executive
#27

Absolutely, yes. Absolutely. What I'm saying is, the economics we see are quite strong. However, it's another — it's based on another flow sheet along with a somewhat different blend of rare earths and minerals, especially since ours centers on heavies. That point really matters to grasp. Our flow sheet centers heavily on heavies and critical metals. It doesn't really center on lights.

Sujeeva De Silva analyst
#28

Rob, Lionel, and Barbara, I want to wish you the best in your new positions. So those first customer MOUs are now reaching a point where POs will start coming in, and I'm curious whether pricing is turning out the way you anticipated, and whether customers feel at ease with the amounts you'd previously indicated?

William Steele executive
#29

Yes, just as anticipated.

Sujeeva De Silva analyst
#30

Excellent. Next, what's your view regarding bigger clients who could fund additional production capacity by injecting their own money, as opposed to tapping USAR's funds to expand among the varied customer base? Has anything changed in your thinking on that?

William Steele executive
#31

Yeah. Essentially, our main approach remains funding the line's growth ourselves. That's a fair point you've made. There's genuine disagreement about it; however, because of the level of demand, along with the demand trajectory we see spanning many different customers and sectors, it justifies us proceeding independently with regard to our near-term investments. That said, it's obviously possible that one of the big customers we're in discussions with could step in and absorb a whole line. Still, right now our plan is to serve a variety of buyers needing various magnet types, supplying them across several years through batch processing. So that's what we're concentrating on at present.

Lionel McBee executive
#32

Thanks. I appreciate everyone taking the time to be with us tonight, and I’m grateful you joined. If anything else comes up, please don’t hesitate to get in touch with us tomorrow or in the days ahead. I look forward to talking with you.

Operator operator
#33

That brings today's conference to a close. We appreciate your joining us for this presentation. You're welcome to disconnect at this point.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete USA Rare Earth, Inc. transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to USA Rare Earth, Inc. earnings transcripts and 132,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.