Lattice Semiconductor Corporation (LSCC) Earnings Call Transcript
November 2, 2026
Earnings Call Speaker Segments
Thanks, operator, and good afternoon to all of you. Joining us on the call are Ford Tamer, who serves as Lattice's CEO, and Lorenzo Flores, our CFO; together we'll walk through a financial and business review covering the third quarter of 2026 along with our outlook for the fourth quarter of 2026. Should you not yet have a copy of the earnings press release, you can locate it in the investor relations section of our company website at latticesemi.com. I'd like to remind everyone that on today's conference call we may make projections or other forward-looking statements concerning future events or the company's future financial performance; please be cautioned that these statements are predictions built on information currently available, and that actual results could differ materially; we point you to the documents the company files with the SEC, including our 10-Ks, 10-Qs, and 8-Ks. Within those documents you will find identified important risk factors that may cause actual results to differ materially from what our projections or forward-looking statements contain. This call includes and constitutes the company's official guidance for the fourth quarter of 2026. If at any point following this call we communicate any material changes to this guidance, we intend for such updates to be made through a public forum, such as a press release or a publicly announced conference call. During this call we will refer primarily to non-GAAP financial measures. By disclosing certain non-GAAP information, management intends to give investors additional information that permits further analysis of the company's performance and underlying trends. For historical periods, we provided reconciliations of these non-GAAP financial measures to GAAP financial measures, which can be found on the investor relations section of our website at latticesemi.com; with that, I'll hand the call over to our CEO, Ford Tamer.
Thanks, Rick. Good to have everyone with us on the Q3 earnings call. Lattice achieved record revenue in the third quarter of $291 million — a 45% rise quarter over quarter and 118% higher than a year ago. Non-GAAP EPS came in at $0.72, more than 155% above the prior year and comfortably past the top of our guidance range, since we turned revenue growth into even greater earnings growth. At the midpoint, our Q4 revenue guidance of $335 million implies roughly 130% year-over-year growth, an annualized run rate north of $1.3 billion; that is above the outlook we gave last quarter and shows momentum picking up along with demand across the board. Our Q4 non-GAAP EPS outlook midpoint of $0.84 works out to 160% year-over-year growth, which speaks to our operating leverage, the differentiated value we deliver to customers, and disciplined execution. With continued scaling, we anticipate that EPS growth will stay substantially above revenue growth as time goes on. Such a view suggests non-GAAP EPS for full-year 2026 of roughly $2.50, which is a 140% increase year-over-year—a plain sign of the earning strength we are constructing throughout the company. The results for Q3 and the guidance for Q4 exceed expectations by a wide margin. This stems from our intentional approach of helping customers and partners succeed through differentiated products, solutions, support, and supply. Our promise to you, our valued shareholders, is that we will state our plans and then deliver on them. This call marks two years since I joined Lattice. We've now hit that target for eight straight quarters, and we plan to keep doing so going forward. Next, I'll walk you through our FPGA business, where both our results and our forecast are considerably better today than what was anticipated two years back. The growth showed up across every end market we serve. FPGA revenue came in at $252 million, a 90% increase year-over-year. Our Compute & Communications segment posted record revenue, rising 132% year-over-year, fueled by fast uptake in data center AI applications. That rising demand mirrors investment in AI infrastructure, more servers being deployed for agentic inference, and greater AI content per server. We're still seeing gains from greater FPGA usage in emerging use cases, as architectures become more disaggregated and complex and security demands keep rising. Our Industrial & Embedded portfolio kept expanding, posting a 35% year-over-year revenue gain. Global PMIs and those for individual regions are hovering close to all-time highs following the bottom of the most recent slump. We anticipate that Lattice's Industrial & Embedded segment will outpace the broader industrial market and pick up speed in Q4 and on into 2027. The expansion spans every sector — factory automation, robotics, aerospace and defense, medical equipment, and autonomy. Channel inventory looks healthy, customer engagement is picking up speed, and several new design wins are moving into production, so we see Industrial & Embedded becoming a more significant growth driver as we head toward 2027 and past it. In the quarter, we strengthened our lead in small and mid-range FPGAs. We launched Lattice Prompt, an AI-assisted tool for developing on Lattice FPGAs that enables developers to build and verify FPGA applications through natural language prompts. It does this by connecting the large language model customers favor, together with an agentic development environment, to our Lattice Radiant tools, generating FPGA code that is tested and proven. Lattice Prompt delivers substantial productivity gains for FPGA developers and marks a major advance for our customer base. We also brought out the Mach-N2 family, our newest secure control small FPGA platform, with integrated flash, a hardware root of trust, post-quantum cryptography, and enhanced connectivity, and customer sampling is already underway. Now let me tell you about how Lattice keeps expanding its leadership in secure control and management, with the AMI acquisition successfully closed on July 27. The AMI business also posted better-than-expected results in Q3, and we anticipate continued growth in Q4. During the roughly three months since the deal closed, we've spoken with hundreds of customers and partners around the world. What they've told us has strengthened our confidence in the strategic rationale behind the transaction and confirmed how well our portfolios fit together. Following the AMI acquisition, we introduced AMI Rack Manager, which makes deployment and operations simpler for large-scale AI data centers. In addition, we expanded our work with SK hynix across the ecosystem, using our memory resilience technology to boost server reliability. Together with AMI, we hosted Lattice and AMI Tech Summits in Taipei and Shenzhen, drawing more than 700 attendees plus over 20 customer and partner demos — a clear sign of how close we are to our customers. Our ecosystem keynote lineup featured Advantech, Inovance, Intel, Mitsubishi Electric, NVIDIA, NXP, Panasonic, Qualcomm, and Sony — a clear demonstration of what our companionship and firmware strategy can deliver. At OCP, during the Lattice and AMI keynote, we unveiled the Secure Control and Management Plane Initiative, or SCMP, together with seven industry leaders: AMD, Arm, ASPEED, Intel, Jabil, Microsoft, and NXP. Four additional industry leaders have since told us they plan to join this exciting industry-wide effort. That speaks to how relevant secure control and management are for autonomous data center infrastructure as well as industrial and embedded applications. Last, an update on our recent launch of four joint Lattice AMI solutions covering streaming rack boot, security retrofit, plug-and-play deployment, and power and cooling management. The feedback on those pre-integrated, pre-validated FPGA and firmware products was extremely positive. Customers saw right away the advantages of getting to deployment quickly, less complexity, and reduced risk in implementation, which prompted a substantial number of them to move forward into proof-of-concept work. To sum up, we came into the fourth quarter posting record revenue, faster bookings, and a backlog running well into 2027. Driving this momentum are normalized channel inventory, our lead position in small and mid-range FPGAs, and our part as companionship, firmware, and solutions across both data center and physical AI. Consequently, demand in data center keeps expanding. Industrial and embedded is rebounding strongly, and the AMI acquisition widens the markets and applications we are able to serve. All of these factors combined give us confidence that growth will continue and profitability will keep improving. If we look further ahead, into the medium and longer term, we expect revenue growth of at least 60% year-over-year in 2027. We also expect revenue to continue growing at over 30% CAGR over the next five years. This confidence is based on the multiple growth vectors we have just described. We expect this to create a sustainable, secular growth company with a broad and diversified customer base and market segments; in turn, we believe this will drive robust demand for the foreseeable future. Our focus is on turning that opportunity into long-term earnings growth for you, our valued shareholders, for many years to come. With that, I'll pass things over to Lorenzo Flores, who will walk us through the third quarter results and outlook. Lorenzo?
Thanks, Ford, and good afternoon, everyone. The key takeaway is that Lattice is turning in outstanding financial results — last quarter, this quarter, and, as we see it, the next quarter, the next year, and further out. Revenue came in well ahead of guidance. The FPGA business and the AMI business each beat expectations. Total revenue for us was $291 million, which is 118% above last year. FPGA revenue of $252 million is roughly 90% higher year-over-year. Gross margin also beat guidance, once more in both FPGA and AMI. We held operating expenses to our guide as well and produced a dramatic profitability expansion, with Q3 non-GAAP EPS of $0.72 amounting to 2.5 x the prior year's EPS. Based on where our business is headed, 2026 looks like it will be a standout year. Our expectation is that 2026 will bring in roughly $1 billion in revenue along with $2.50 in EPS. Compared with last year, that works out to almost twice the revenue and earnings that are about 2.4 x larger. We've been driving this expansion throughout the end markets we serve, and we anticipate that robust growth will keep going. Here are a few key highlights. Revenue for Q3 reached a record $291 million, an increase of approximately 45% quarter-over-quarter. Within that total, FPGA revenue came in at $252 million, which is up roughly 90% year-over-year and 25% quarter-over-quarter. The force behind this was yet another record in Compute & Communications, climbing 132% year-over-year and 36% sequentially. Of real importance, Industrial & Embedded revenue likewise increased 35% year-over-year and 7% sequentially. During the two months after we acquired AMI, it contributed $39 million in revenue, which was also better than we had anticipated. Non-GAAP gross margin for Q3 exceeded our expectations, landing at 70.9%. We outperformed our targets by weighing supply chain challenges against what our customers required. Non-GAAP operating expense for Q3 totaled $86.7 million, in line with our guidance and up about 29% from the prior quarter. That quarter-over-quarter increase largely reflects the addition of AMI along with ongoing investment in our product roadmap. In Q3, our non-GAAP operating margin grew 280 basis points from the previous quarter to 41.1%, and EBITDA margin climbed 200 basis points to 45%. For Q3, non-GAAP EPS came in at $0.72 — roughly 160% higher than a year ago and 36% better than the prior quarter. That's well above the top of our guidance range and shows how much leverage our model has. On a GAAP basis, net cash flow from operating activities in the third quarter of 2026 was $95 million, compared with $88.3 million in Q2. Free cash flow in Q3 totaled $77.6 million. CapEx during the quarter was higher than what we typically spend, reflecting investments in test capacity and R&D capabilities that are meant to drive operational efficiencies and future growth. Turning to capital allocation — our priorities haven't changed. We invest in the business to support long-term growth, maintain financial flexibility, pay down acquisition-related leverage quickly, and evaluate opportunistic share repurchases. On that front, we reduced debt by $50 million during the quarter, and we're still on course to bring leverage down more quickly than we'd originally intended. By the end of 2026, we anticipate net leverage will be under 2 x EBITDA; during 2027 we intend to retire debt aggressively while continuing to invest in growth opportunities across our markets; with that, let's move to guidance. As mentioned earlier, we anticipate our robust growth will continue; for Q4, revenue is expected to land between $325 million and $345 million. At the midpoint of that range, that works out to roughly 130% year-over-year growth and 15% sequential growth. We're seeing ongoing expansion in our core FPGA end markets as well as in AMI, and we anticipate that gross margin will stay robust at 72% ± 1% on a non-GAAP basis. Non-GAAP operating expense should land somewhere between $95 million and $101 million. The bulk of the OPEX increase keeps funding R&D investments tied to our product roadmap and long-term growth goals, along with a full quarter's contribution from AMI. For Q4, we project our income tax rate on a non-GAAP basis to fall in the 4% to 6% range. We expect non-GAAP EPS to come in between $0.82 and $0.86 per share. Looking at the middle of that range, we'd expect to top 160% growth in earnings year over year, showing again how much operating leverage our model carries. It's worth repeating that what we're projecting for Q4 implies roughly $1 billion in revenue for all of 2026, which is about 90% growth compared with 2025; FPGA revenue, we believe, will come in above $900 million, which works out to more than 70% growth year over year. Also important: we're looking at earnings per share of roughly $2.50 for the full year, an increase of about 140% year over year. What these figures show is how strong our business model is, the advantages that come with scale, and the considerable earnings power we're opening up as we carry out our growth strategy. Naturally, your attention is on what we expect for 2027. Although our 2027 annual operating plan isn't finalized yet, we can see enough at this point to share some expectations. As Ford mentioned, we have a clear route to growth of 60% or more off the roughly $1 billion in revenue we project for 2026. Compute & Communications should stay our fastest-growing end market. Industrial & Embedded ought to keep up its strong upward trend, and we expect AMI to grow in line with what we previously anticipated. The planning cycle is still at an early stage, but our confidence comes from our backlog, from design wins in I&E ramping up and adding to the strength we've already shown in C&C, and from the contribution we expect AMI to make. To wrap up, Lattice is heading into Q4 carrying considerable momentum on every measure. Lattice and AMI combined face a wide market opening, and that puts us in position to capture greater value throughout each of our core markets. Our attention is on turning that opening into revenue growth that outpaces the market, quicker earnings growth, healthier free cash flow, and lower debt — while still investing to create long-term shareholder value. Operator, those were my prepared comments. We're ready now to take questions from callers.
Yeah. Good afternoon, and thanks for taking my questions. Congratulations on the strong results here. My first question is about the guidance for next year. So you've laid out a path to roughly $1.6 billion or more of revenue in 2027. Could you maybe just help us unpack and understand what gives you confidence in that kind of outlook this early?
Thank you, Sebastien. Good question. What we're building is a company with durable secular growth, not just through 2027 but past it. Because of the several growth vectors we've worked hard to develop over the past few years, we do expect to grow faster than market. Several elements underpin our confidence for 2027. First, backlog visibility stretches far beyond 2027, reaching into 2028. Second, all players in every geography are showing strong ongoing CapEx, and multi-year long-term agreements are being signed with our customers. Third, sustained AI-driven content expansion is tied closely to business fundamentals—unit growth, new features such as security that drive higher value—and attached FPGA rates are climbing quickly. Fourth, our industrial embedded business is now shipping to natural demand, meaning the inventory situation is behind us, and we're very excited about new applications like factory automation fueling our growth in 2027. Fifth, AMI has now been with us for a complete year. Sixth, our revenue from newer products — Nexus and small FPGA among them — is climbing sharply. Past those, we also have a number of fresh growth vectors extending toward 2028 that we could go through as well.
Right, excellent. Maybe this ends up being a growth vector for 2028. As a follow-up, I just wanted to ask about the four Lattice AMI joint solutions you announced a few months back — the security retrofit, the rack boot, the plug and play, and the power and cooling. Can you give us a feel for which of those is seeing the most customer engagement or traction so far, and when that ought to begin contributing to revenue?
Yes, of course. We're seeing robust growth across every one of them, and tens of customers are already in proof of concept. The clear standout is the security retrofit, since it enables operators to modernize their fleet while keeping the hardware as is — and that would allow them to shift the fleet onto the newest post-quantum cryptography for security immediately. It reaches production with the first customer this quarter, and with numerous customers moving into production during 2027, and we anticipate revenue will inflect significantly in 2028. Past that, we see the remaining three. The streaming rack boot is excellent, as it enables our operators to update all firmware simultaneously throughout the entire rack, the entire pod, which saves considerable time and delivers enormous consistency. One of our largest hyperscalers will bring the power and cooling offering to market shortly, and by contributing that solution to OCP it should gain traction and turn into a significant volume driver. Last, plug and play will matter a great deal in letting operators combine x86 and Arm, and combine different baseboard management controllers, within a single rack. These solutions reaching the market beginning this quarter, running through 2027, and then adding meaningfully to revenue in 2028 have us very enthusiastic. Past that, we anticipate an additional inflection in industrial embedded tied to humanoids, physical AI, and aerospace defense applications arriving on the market in 2028. Avant, which is our mid-range FPGA line, should turn up meaningfully in 2028. Beyond that, we see fresh AMI capabilities—OnSil, for instance, lets customers emulate firmware before tape-out, and memory resilience tech extends how long memory lasts in the field. So there are some very exciting growth vectors ahead, Sebastien.
Great. Thanks for all the detail, Ford.
Yeah. Hi there, good afternoon. Hey, everyone. Congrats on the momentum heading into year-end, and thanks for the longer-term guidance. I guess to follow up on the question about 2027, Ford — going off the run rate, it looks like you'll need roughly $400 million a quarter on average. I'd like to understand how you expect that revenue to be distributed across the year, and what portion of that 60% is already in backlog versus what depends on customer feedback about design wins ramping — or perhaps you could address pricing, given the strength of demand. Thank you.
Yeah. Thank you, Ruben. That covers several questions. I'll start and then pass it to Lorenzo. On the first one, linearity: we've taken a more conservative stance on the second half of the year. Within that 60% guidance, you're likely looking for growth in Q1 and Q2, and we haven't baked in that same growth rate for Q3 and Q4. As the year unfolds, we do expect — once we see the Q1, Q2 numbers come through — that we may be able to raise those figures. So we feel confident about our 60% or higher growth rate. Second, on the pricing question: we're seeing some cost increases from our suppliers, along with expedite fees, because we have a lot of demand from our customers, and we're passing those along to customers. But really, pricing isn't the story. Pricing is only a small part of the equation. The real takeaway is that we're seeing both more units and greater value per unit, driven by our move into new use cases like security—which I mentioned earlier—and by the new products themselves. Those carry a higher price tag since they pack far more capability as customers shift from our older offerings to the Nexus and Avant families. Yes, Lorenzo?
Ruben, let me add a bit more detail here, since we're still in the planning cycle for our business. What we've examined, as Ford mentioned, is the near term: growth rates are going to stay strong, and we will continue to see growth — just so that's clear. We still expect growth, meaningful growth on a year-over-year basis, in the second half of next year. As we plan the business, we want to be sure we're taking environmental concerns into account and grounding that — I mean, comparing it with what we see directly in our business, which, as Ford said, is quite strong; we'll manage the business through the year. What gives us a lot of confidence is that the fundamental drivers of the business — Ford laid them out in response to Sebastien's question — remain strong, and we're widening the growth rate across our end markets, Industrial & Embedded included, and we see that reflected in continued unit volume growth this year and next year.
Yeah, got it — that's really useful. Naturally, Lorenzo, I need to circle back on C&C and put this to Ford. Back in July, Ford, you mentioned the possibility of a 20 million server unit TAM for 2026. I'd guess that with this early 2027 outlook, there's been plenty of discussion — and you brought it up in the prepared remarks regarding agentic workloads on servers. Do you have an early read on server units, and could you perhaps give us a rough high-level sense of how quickly you think Compute & Communications might grow around the server opportunity? That would help. Thanks.
Sure. Good question. What we shared on the last call in July was accurate. We do expect server units to come in at roughly 20 million this year. We do expect them to rise to about 25 million next year. The growth rate, in our view — and based on what the market research and our customers show us — will be faster next year than this year. We move from, call it, 22% year-on-year growth to roughly 25%. Inside that, we do see AI continuing to expand from what may be 25% AI server share this year to around 40% server share next year. Then we see our attach rate and our content rising too, because, as I said, we're shifting from older technology to newer products such as Nexus and Avant.
That's quite useful. I appreciate it.
Hi, everyone. Thanks for the opportunity to ask. I'd like to inquire about how AMI has been performing. In your prepared remarks, you said it's tracking in line with your expectations, but from what I remember, you were figuring this business at roughly $200 million a year. It appears it may be doing somewhat better than that. And regarding gross margin, I believe it was expected to be something of a drag on the reported quarter, until certain non-core assets were sold. Perhaps you could bring us up to date on how that turned out.
Yes. Hi, Gary. I appreciate the question. For Lattice as a whole, margin this quarter exceeded what we anticipated in both the FPGA business and the AMI business. On your point regarding AMI, revenue for Q3 — and again, that's only a partial quarter for them — arrived a little above what we had forecast, and the mix was better, which means a greater share of high-margin business. That therefore benefited AMI's margins; at the aggregate level, we continue to view it as roughly a $200 million ± run rate business across the year. It's improving, and then in the next year, we ought to grow substantially as part of our 2027 AOP. Within that growth, this non-core business, as you mentioned, will no longer be there. Margins ought to expand into the high 70s, as we've previously stated. So for us, it's a strong driver of both revenue and profitability.
Understood. So regarding OPEX in 2027, how should that be modeled against revenue growth? Could we potentially see a 45% handle on the non-GAAP operating margin in 2027?
Yes. That's a great question, and we'll provide more details as we work through our planning process. But what we're aiming for during that planning process is to grow EPS — the bottom line — faster than revenue under the scenario Ford and I described in our prepared remarks, in terms of the revenue growth we expect. So that means we need to take all the right planning steps on OPEX. Still, we believe we can fund a significant amount of growth opportunities while maintaining this very, very meaningful year-over-year growth in EPS.
Thanks so much.
Hey, everyone. I’ve got a question about those long-term agreements with customers you brought up. What’s different now versus roughly a year back, given that you have far more visibility and customers are obviously keen to lock in supply? Could you maybe share what percentage of revenue for next year is covered by LTAs, and does pricing sit inside those deals or are they purely volume-based? If pricing is included, would the gross margin profile resemble what you report or what you’ve guided into Q4?
Tristan, you knew that answer was coming, right? Clearly, no. We won’t be laying out every detail of our customer agreements on a call with a gazillion people listening, but nice try.
All right. Yes, thanks. I realize that coverage was given on some earlier occasions, but I get it. What I wanted to ask next was whether you anticipate any kind of restocking of inventory, particularly on the industrial side. You said inventory levels are lean, but do you expect a rebuild at some point that you would ship against?
Yeah
So for next year, does that track with what demand looks like?
Hi Tristan, you mean channel inventory, is that right?
That's right. Yes.
Yes. All right. The reason is that I want to draw a clear line here. On channel inventory, our aim will be to keep things near where they currently stand. That gives us far better sight into what end customers actually demand, and it lowers the risk of an overhang; so a given quarter's figure might rise or fall, but our real approach is to look past the distributor toward the end customer and align supply with demand. This holds for both Industrial & Embedded and Compute & Communications; so no, we won't be seeing that happen to any meaningful degree, and definitely not as a matter of strategy in the coming year. To remove any uncertainty, I'd add that we are quite intentionally building inventory internally so we can meet what we anticipate will be substantial growth in Q4, in 2027, and after that. So our inventory figures will climb. You'll have noticed they climbed during the quarter just ended.
All right, thanks a lot.
Hi, everyone. Just a fast point of clarification, if I may. When you mention growth rates easing in the back half, did you mean that on a year-over-year basis? Or was it meant more sequentially? And then I have a follow-up question.
Honestly, I'd say yes on both counts, since mathematically it would roughly come out that way. But the real situation is that growth numbers remain quite strong. It's simply that, once more, when planning the business, we prefer to stay cautious on that front and avoid stretching ourselves too far. Go ahead — you mentioned having a follow-up, Quinn?
Yeah. My follow-up question is this: I think you guys — and it sounds like demand conditions might have kept up their very strong pace — but I think in the prior quarter you saw demand spike late in the period, which led to delinquencies that were higher than usual. I was wondering whether you could give us an update on your delinquencies. Are you beginning to make headway toward a more typical delinquency level, or has demand stayed so strong that those delinquencies remain elevated? I suppose on a related note, any thoughts on how you feel about your ability to add capacity in support of the demand environment. Thanks.
Yeah. So I am assuming you mean supply, and if that is what the question is about, supply, is that right, Quinn?
Yeah, that's right.
All right. Understood; so, we're in good shape. We're also putting multi-year supply agreements in place with our suppliers. We've secured what we believe is the right level of supply for, again, multiple years. We feel good about being able to supply to numbers that are much higher than what we discussed our growth rates to be next year. So, we're ready to do a lot more than what we discussed. Go ahead, Lorenzo.
Yeah. I think the proof of that looks something like this: in our Q3 and our Q4, most of the upside in the business compared with our earlier guidance came from how well we managed to get through what I was describing as a supply pinch point in Q3 and get more units delivered to the customer this quarter; we're seeing the same pattern in Q4. As Ford put it, we feel quite comfortable about supply going forward. So our delinquencies are falling significantly, and our lead time has come down.
Great. Thank you, everyone.
Hello. Appreciate the question. Nice results — congratulations. I hope you won't hold this one against me, but as semis analysts, it's something we feel we have to raise. Are there any indications of double ordering? I mean, we've observed — I realize the channels are extremely lean, and you're in dialogue with the end customers — but is there anything you're doing to help clean up the demand and confirm, particularly in that Industrial & Embedded business, that no double ordering is going on?
Melissa, thanks for asking. Our team has invested an enormous amount of time alongside our customers and the channel, verifying these figures again and again, to ensure we don't ship parts where a customer might struggle to ramp production owing to other components. That's why we stay very close to our customers and partners in this effort. Industrial & Embedded has only just begun ramping once more, so no double-ordering signals exist there. In Compute & Communications, demand is extremely strong. What makes us confident, Melissa, isn't that this booking is short-term in nature. It stretches well into 2028. So we now hold bookings for the foreseeable future, and that's precisely what has given us our confidence. These are being scheduled far out in time.
Thanks. That helps. Regarding Compute & Communications, I may have missed it — did you provide a refreshed FPGA figure per rack or per server, or any metric along those lines? Could you also address how broad the design engagements are? Is your growth pulling in new hyperscale customers? Is it broader-based than that? To what extent does the memory pooling story factor in? Any additional color on how wide the momentum is in data center would be great.
Let me direct you to a new slide in our deck — the corporate deck, just posted on the IR section of the website. Slide 30 lays out all the different applications through which we address data center challenges. You will notice applications spanning compute, networking, and storage across GPU, XPU, DPU, CPU, baseboard management controller, storage, network switch, NIC cards, pooling power, both the HPM card and the DC-SCM cards. Looking at what we detail on slide 30, it lists numerous applications inside the server — from connectivity to fan and power control, to hardware abstraction, to various security functions like root of trust, attestation, post-quantum cryptography, rack-level trust and attestation, low-level deterministic leak response, rack telemetry, manageability, power control, throttling. As you can see, we have a great many applications. Had you asked me a couple years ago, we lacked all of these. On trust and control alone, we now face all the new regulations for CNSA 2.0 and CRA compliance. Those regulations must be satisfied by early next year; so customers are exerting tremendous pressure to deliver these new applications. We are very excited about this. Let me take you to slide 32, an additional slide that existed previously, showing the various applications we have for Industrial & Embedded, and we are quite excited about those. Let me point you to one more spot in the deck. Actually, a couple. If you go further down to slide 35 and past it, you will see quite a few additional applications. So there are quite a few applications there; but let me point you to a new product we announced this quarter called Prompt, Lattice Prompt. What it does is let customers develop their application from an English language prompt, integrates with their preferred language model, their preferred IDE, and from a prompt it would generate not only the code but also validate the entire application. So you can test a proven application in a matter of days rather than weeks and months. Even more, it truly expands the developer base well beyond what we had previously. We're really enthusiastic about the market expansion we're seeing with Prompt, since we genuinely believe a huge number of applications exist that are more deterministic, closer to hardware, and closer to the sensor, and those need to be done in FPGA. Previously, they were done in software simply because we don't have enough programmers and developers who know how to program RTL. So this is going to open up a completely new developer base, and we're very excited about the new application this is creating. So all of this is pushing our attach rate to numbers we've never seen before, along with a fantastic range of new applications. We haven't even begun dreaming about the applications that Prompt can open up. This shows we're truly at the very early innings of this whole AI revolution. So we're very excited about the future ahead.
Many thanks, Ford.
Appreciate it. Ford, your response really showed some fire. I'd like to pose one more question with a longer horizon. You mentioned growth of roughly 30% over five years. I'm just wondering — and you did partly address this in what you said before — but considering how this industry has historically behaved, you must be spotting something in the marketplace that supports talking about five years of 30% growth, since this sector has been cyclical in the past and didn't really expand at that pace. So I'm curious: is that a Lattice-specific remark, or do you believe the FPGA industry now sits in a structurally stronger place going forward?
This draws on my own history and on our shared history. Srini, you've been in this market as long as I have — and honestly, I may have been in it even longer than you, since I'm older. Look, this is the third time I've watched this play out. I saw it at Broadcom in the cloud, where we were driving networking forward, and eventually we got optical going, and now here we are launching this entire Secure Control and Management Plane, and the sky is the limit. I mean, through the cloud revolution there were plenty of winters and plenty of ups and downs, but just look at where we stand today. When you examine the results from every hyperscaler, the cloud stands out as the truly brilliant spot, with demand still rising two decades on from the cloud revolution. On optical, as you'll recall, we kicked that off back in 2012, and just look at the enormous transaction Marvell and Lumentum announced today—$115 billion. Again, with this optical business, the two of us can count up all the downturns we lived through in optical, yet taking the long view, the market has climbed. I genuinely see Lattice as an ideal gauge for the industry, since we touch every one of the different sectors, all the different customers—11,000 customers—spanning highly broad-based and widely varied segments throughout Compute & Communications and Industrial & Embedded. The list of applications is extensive—robotics, humanoid machines, factory automation, drones, autonomous vehicles, and it continues—medical, aerospace, defense. We participate across all the leading aerospace and defense segments, and we're currently standing up a rad-hard process on U.S. soil in Austin. That's another development we're genuinely enthusiastic about. Yes, we really do see this revolution as being in its early innings. The market is quite jittery at the moment, but I think we need to focus on the longer-term picture. Nothing in the figures we're reporting points to a slowdown. If anything, they reflect tremendous acceleration. We do expect that some company-specific issues will emerge. On the FPGA side, our PC market exposure is zero, all right? That's behind us. On AMI, we have very little PC market exposure, so that's fine, but server is the big business. Every part of our business is moving in a positive direction and building momentum. We're definitely quite excited, and we see this as multi-year growth, and I think people need to look beyond the small amount of turbulence we're dealing with right now and focus on the long term.
That makes sense, Ford. For Lorenzo, I have my next question. Lorenzo, you mentioned briefly that your balance sheet inventory had risen somewhat. Your receivables also increased, yet you beat consensus by roughly $35 million. I'm just curious how that quarter went. Was it pretty linear? Or did things speed up toward the end of the quarter? My other question: given your balance sheet inventory, if we see incremental demand relative to your guidance over the next couple of quarters, it seems you're sitting in a fairly good spot; also, tell us about supply in case there's more upside ahead in upcoming quarters. Thank you.
Yeah. Let me go back to how Ford framed the longer-term supply picture. Near term, you're referring to the balance sheet items we saw in Q3. For everyone's benefit, that quarter was different since AMI was included for the first time, so certain account balances, such as AR, would have risen. When you look at the days, it's actually lower, and our cash conversion cycle looks quite good. The inventory piece is something we're investing in, and what you'd have observed as we moved through the quarter matches your point, your question about linearity. Owing to the supply side, a lot of material comes in toward the end of the quarter last quarter. We ship a lot of material out. That will begin to even out over the next few quarters, and our linearity will look better. On the whole, we believe the company's cash generation engine will stay really, really strong. What we're doing very deliberately is adding supply, as you noted, to support demand upside. Given the potential demand scenarios we see, given our margin structure, and given how long-lived the products we build are, we view the risk as minimal in holding a few extra parts, and we don't want to miss the chance to capture the upside when it's there.
Understood. Many thanks.
Hi, everyone. I appreciate you taking my question, and congratulations on the great results and outlook. I believe previously you've mentioned FPGA per servers rising from one to more than 3x. Could you discuss where we stand in that progression? As rack scale and heterogeneous architectures keep spreading more widely, should we be thinking about any sort of cap on content or units? I think that generally has been a big FPGA problem, not one for small and mid-sized players. But I'd be curious, as we consider you generating well over $1 billion of FPGA revenue next year, whether there's any sort of cap on the TAM or content we should be thinking about. Thank you.
No, thank you so much, Joshua. Yes, this will be well over $1 billion next year. Look, that attach rate figure has been rising steadily from one to two to three to it begins with a four at present, okay? We won't give you further detail, but you can see it keeps growing; that's due to new applications we're finding, and we're quite excited about it.
Right, and I also think about the Industrial & Embedded segment — once physical AI starts getting deployed, we'll witness an attach-rate effect much like the one showing up in Compute & Communications and the data center. So the ceiling — we prefer to view it as having no cap — but we're basing our growth-rate view not just on the unit volume the industry ships, but on an attach rate that keeps rising over time.
Yeah, Joshua, I'd say a humanoid actually offers far more potential sockets compared with a server, since you've got vision, motor control, and connectivity. A humanoid has considerably more attachment points than a server does, so the humanoid industry, for instance, might end up larger than the server industry.
Right. Competition is going to show up, and we intend to be ready — not only on the silicon front but also on software, with capabilities such as Prompt, embedded firmware, and manageability, where that gives us an edge we can put forward and offer customers a greater-value opportunity.
Thanks for that extra detail. As a follow-up, you all made it quite clear that like-for-like ASPs or pricing isn't what's fueling growth for this year or the next. Could you perhaps discuss how much of the—when we consider your outlook for 60% growth next year, obviously AMI contributes, but how much comes from new product growth as Nexus and Avant come in more meaningfully with the higher ASPs attached to them? Thank you.
Yes, thanks, Joshua. The first magnitude really propelling this is unit growth from existing product. The second will be the expansion of the new products. The third will be AMI and the related solution on FPGA and firmware. That's the way I'd rank them.
Thanks.
Hi, I appreciate you making room for me here, and the results are fantastic. Being on the Lattice call is really great. I suppose I also had some questions looking further out. Ford, you talked about Lattice Prompt, and I was hoping to go deeper on that. Altera came out recently with its Agilex 2X portfolio, aimed at robotics and physical AI. They also have QuartusIQ, their new AI-assisted FPGA design tool. These appear to overlap with how Lattice is positioned in low-power programmable logic and with Lattice Prompt. With AI helping design work become easier to get into FPGAs, and since you said you think this will expand the FPGA market as a whole, what would you point to as Lattice's most lasting edge in these new physical AI use cases? Also, what makes you confident that Lattice Prompt and QuartusIQ would succeed? We've attempted similar things in the past with HLS, Xilinx Vitis, and the Xilinx reVISION Stack. Thanks.
Absolutely, Sajal — I appreciate the question. To start, we were the ones who made the announcement first. I'd point out that Altera's news came after ours, so it's good to see people keeping an eye on what we do. Their tooling will support their products, and our tooling will support our own. Lattice Prompt, our toolset, is designed to function alongside Lattice Radiant, which of course supports our FPGAs. My view on why these AI-assisted tools will succeed now, more so than they did previously, is that they plug into the IDE that users already rely on. Be it Claude, OpenAI, Cursor, or whatever you happen to be working with, these tools will integrate smoothly with the language model you prefer and the IDE you prefer. We are already observing the gains. The gains, frankly, are enormous. Applications get built within hours and reach production within days, whereas previously that took weeks and months. This represents a really significant shift for everybody involved—not only for our company but clearly for Altera and Xilinx as well. Our differentiation over the long run will center on small FPGAs and, in time, the mid-range segment. We keep a tight focus on our markets and intend to deliver low power, compact size, superior connectivity, minimal latency, and quick boot times—the things our small FPGA customers demand of us. We stay sharply concentrated on our markets, and in our view there is genuinely fairly limited overlap between us and Altera and Xilinx.
Great. As a follow-up, we're noticing supply constraints at a few of your FPGA rivals. Are you seeing any shift in how competition works for new designs, particularly in servers and industrial control? And is that turning into share gains and better win rates for Lattice? Thank you.
Yeah, those are really two distinct questions. You began with supply, then moved to market share gain. Supply clearly is a problem across the whole industry, and we, like I mentioned, have locked in supply for our customers. I can't say what our competitors are up to there, but we can only speak to our own situation, we secured supply. On the market share gain, definitely. We are certainly picking up share in the small FPGA. If you had strolled through OCP and looked at each server board, each network switchboard, Lattice is visible everywhere.
All right, thanks.
Thanks for taking the question, and congratulations on the results. So maybe for my first one, just on the conservatism regarding the back half. I'm a bit curious. Do you have backlog — solid backlog coverage across that period? What does the data show? Are these actual customer conversations you're having that drive that? Or is it maybe just what we've seen in the stock market lately and concerns about the back half? I'm just wondering, is this data-driven? Is it feedback-driven, or is it more of a gut feel?
No, good question, Chris. No, our backlog extends well into 2028. Yes, Q1, Q2, Q3, Q4 of 2027, and into 2028, meaning Q1, Q2 2028. We're already into 2028 right now. Our confidence comes from backlog, but it's November 2nd of 2026. Would it change anything if I told you we'll grow at 70% or 80% next year rather than 60%? I mean, we've said we'll go over 60%, and it could be 70%, could be 80%, but it could be 60%. I mean, at this point on November 2nd, we don't see a benefit or upside to going beyond over 60%.
All right. That's very clear, Ford. Thanks for that; moving on to my second question, Ford, your cash position is growing once more. You're the strategy and vision person at Lattice, so chances are you're considering maybe further acquisitions, tuck-ins, or possibly even bigger ones. Maybe you could share where your thinking stands and what's on your mind. Is your focus on software or hardware? Are you looking at FPGAs or possibly things beyond that? Is everything driven by AI data centers, or is it something else? Just any thoughts on where you might go.
Yeah, hey, just.
Let's move on to the company.
Hold on, hold on—just a moment. I want to make sure everyone is aligned here. Our cash balance isn't growing. Cash is being generated, and we intend to pay down the debt aggressively. Beyond that, I don't think anything has changed in how we see inorganic opportunities. Our lens is very wide but our aperture is very narrow, and near term we're going to concentrate on reducing the debt and completing the integration—the successful integration—of AMI. So that's where things stand. Thank you.
Lorenzo, my intention was growth starting from this point.
All right. Still, no worries, that's okay. In any case, we've run out of time, everyone. Rick, would you like to close things out?
Yeah, we’ll be there. Thanks to all of you for being with us on today’s call. During this quarter, we’ll take part in these investor events: the RBC TMT Conference in New York City on November 17th, the UBS Global Technology Conference in Scottsdale on December 1st, and after that the Barclays 24th Annual Global Technology Conference in San Francisco on December 9th. We really appreciate your participation, and have a great evening.
Goodbye.
You may disconnect your lines at this time. We thank you for your participation.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Lattice Semiconductor Corporation transcript - plus 131,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Lattice Semiconductor Corporation earnings transcripts and 131,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.