Action Construction Equipment Limited (ACE) Earnings Call Transcript
July 21, 2026
Earnings Call Speaker Segments
Good day, everyone, and welcome to the Action Construction Equipment Limited Q1 FY 2027 earnings conference call, brought to you by Anand Rathi Share and Stock Brokers Limited. <<operator_script>> Kindly be aware that this call is being recorded. I'll now turn things over to Mr. Aniket Jain of Anand Rathi. Thank you, and the floor is yours, sir.
Good afternoon, everyone. I'd like to welcome the leadership team from Action Construction Equipment and express our appreciation for this chance to speak with them. Joining us today are Mr. Sorab Agarwal, Executive Director; Mr. Rajan Luthra, Chief Financial Officer; and Mr. Vyom Agarwal, President. At this point I'll turn things over to management for their opening remarks. Please go ahead, sir.
Thank you, and good evening, everyone. Welcome to this earnings conference call, where we'll be discussing the results for the quarter ended June 2026. Joining me on today's call are our CFO, Mr. Rajan Luthra, and our President, Mr. Vyom Agarwal. I trust you've had a chance to go through the company's financial statements and the earnings presentation, which has been circulated and uploaded on the stock exchanges. I'll now walk you through some of the key highlights of how we performed during the quarter. After the normalization we saw in the second half of the previous financial year, demand across the construction equipment industry held steady during the quarter, and we have sustained our growth momentum. The financial year has started amid an unpredictable domestic economy, as the global operating environment has grown increasingly uncertain. India's macroeconomic fundamentals remain strong. Rising geopolitical tensions in West Asia, volatility in energy markets, firm steel prices, elevated freight costs and inflationary pressures across most of the industrial commodities have contributed to cost volatility and supply chain uncertainty for manufacturing businesses worldwide. Against this backdrop, our company posted its best ever Q1 performance, with continued focus on disciplined execution, operational excellence and maintaining a healthy balance between growth and profitability.
Keeping our focus on quality products, efficient manufacturing, cost optimization and measured price adjustments allowed us to post our strongest Q1 ever for revenues and profits. Now I'll walk you through the financial results for Quarter One of FY 2027, standalone. For the year on a standalone basis, total income rose roughly 19% to INR836 crores, with EBITDA margin up 12 basis points to 20.40%. EBITDA for the quarter was up 19.66% at INR170.58 crores versus about INR142 crores. PBT gained 73 basis points, rising 23.81% to roughly INR156.79 crores. PAT gained 41 basis points, climbing 22.47% to INR118.59 crores, compared with INR96.83 crores in the same quarter last year. PBT and PAT margins for the quarter now sit at 18.75% and 14.18%, respectively. Sequentially — that is, quarter over quarter — in line with our historical patterns, total income fell 18.15%, while EBITDA, PBT and PAT each expanded, by 438 basis points, 395 basis points and 353 basis points, respectively. Turning to segmental business performance, the company has kept up its growth momentum across every operating segment.
For cranes, construction equipment, and material handling, consolidated revenue in the quarter just ended came in at INR738.37 crores, against INR605.43 crores in Q1 FY 2026 — a rise of roughly 22%. Volumes were up 17.25% year-over-year. Margins likewise expanded, reaching INR134.09 crores compared with INR107.83 crores, which works out to 24.35% growth year-over-year. The agri equipment division posted revenue of INR42.67 crores and a margin of INR4.34 crores. Results for this quarter show we kept up operational discipline and managed costs prudently. Looking ahead, we will keep watching commodity markets closely and stay focused on safeguarding profitability via sustainable operational enhancements instead of depending only on pricing moves. The strategic joint venture with Kato Works Co., Ltd., which we announced in the prior quarter, gets underway by the end of July. That represents one more key milestone for our long-term growth strategy. Through this partnership, ACE’s manufacturing strength and leadership in the domestic market come together with Kato’s technology, which is recognized globally, and its footprint in the heavy crane segment. The joint venture offers a strong platform for growing our domestic presence in truck cranes, crawler cranes, and rough terrain cranes, and it also supports technology upgradation, localization, and export opportunities across the medium to long term.
This move further boosts where we stand in the greater-value-added heavy crane segment and builds on the leadership we already hold in pick-and-carry cranes and tower cranes. Our defense business, too, keeps moving forward at a steady pace. Manufacturing of rough terrain forklifts began during the current quarter. Beyond that, we stay dedicated to creating specialized products for defense uses and to broadening our involvement in this sector of strategic importance. Over the past few years, we have invested consistently in growing manufacturing capacity, upgrading our facilities, and deepening automation throughout our plants. Those investments have markedly improved our manufacturing flexibility, product quality, and operational efficiency. Given our current capacities and better manufacturing capabilities, we are well placed to serve future demand across our product portfolio while keeping capital allocations disciplined. Turning to margins, commodity prices stayed volatile in the quarter because of ongoing geopolitical developments and swings in the global energy market. Prices for commodities such as steel, rubber, oil, and all its derivatives, together with freight costs and currency movements, remain at elevated levels. Against these shifting market conditions, our focus stays on safeguarding profitability through a mix of operational efficiencies and calibrated pricing actions where needed. Our endeavor remains to strike the right balance between volume growth and sustainable profitability, while maintaining and preserving our margin profile.
That disciplined approach has stayed the same across the last several quarters and remains at the heart of how we operate. Turning to what lies ahead, the structural growth drivers for the Indian construction equipment industry are still firmly in place. The Government's ongoing emphasis on building infrastructure, investments in roads, railways, urban infrastructure, manufacturing, and logistics, along with sustained public capital expenditure, keep providing a strong foundation for long-term industry growth. Beyond that, rising private sector investments, growing industrial activity, and a continued focus on domestic manufacturing are opening up new opportunities across several of the end-user sectors we serve. Historically, our business has shown a seasonal pattern, with approximately 40% to 45% of our revenue coming in during the first half of our financial year and the remaining 55% to 60% during the second half, supported by post-monsoon project execution, improved construction activity, and the festive season. Our healthy balance sheet, expanded and upgraded manufacturing capacities, diversified product portfolio, and strong market position give us a solid platform to create sustainable long-term value for our stakeholders. With that, I would like to ask the moderator to open the floor for the question-and-answer session. Thank you.
Thanks a lot. <<operator_script>> Our opening question comes from Shivam Gupta at Trinetra Asset Managers. Go ahead, please.
Hello, sir, and thanks for the chance to ask. My question is this: what portion of this quarter's revenue came from defense and export orders, and how much visibility does the order book give us in that segment for the remainder of FY 2027?
Look, I'd say exports have been a bit soft this quarter, mainly due to problems with shipping and the fact that prices have climbed quite a lot. Every one of our Middle East orders—Saudi Arabia in particular—we weren't able to get them shipped during the last quarter. A few had been sitting pending since March. As a share of this quarter, export sales come in at close to 3%, though I'm confident it'll make up ground, since all those orders remain live and pending. On defense, I don't really have a figure. Luthra, sir, do we have a number for defense as a percentage for this quarter?
We saw roughly 5% this quarter. All right, defense came in at about 5%.
Correct.
Exports came in at just about 3%, while defense was at 5%. In fact, when you look at it across the full year, we're expecting a contribution of at least 6% to 7% from exports — possibly higher — and roughly 5% to 6% from defense. All together, that lands somewhere in the 10% to 12% range.
Alright, sir. For my second question, could you provide an update on how the KATO JV is progressing?
Pretty much everything formal has been wrapped up, and the JV ought to be up and running by the end of July. Some revenue will begin flowing in from the joint venture starting in quarter three. During quarter three and quarter four, a great deal of effort is going to go into upgrading our products. That work is already underway. It will be accelerated further. Real, meaningful revenue from the JV won't begin to arrive until next year and beyond — FY 2028 and after.
All right, sir, thank you. That’s all I have to share.
Yes. Thanks.
Thanks. Our next question comes from CA Garvit Goyal with Serene Alpha. Go ahead, please.
Hi, can everyone hear me?
Yeah, we can hear you. Yes.
Hello, sir, and good evening. Sir, what's your read on how demand and the supply chain are shaping up? Apologies if you covered this in your opening remarks — I missed it. What I'd like to get a handle on is where demand and the supply chain stand now for FY 2027 and beyond, and how we should be thinking about growth at the company level for the remainder of this year? I ask because we didn't grow last year, right? Is it possible for us to make up for the whole of last year — FY 2026 and FY 2027?
Here's one question, and it's really for all of you, especially about demand and the supply chain — I'd like to put it in a somewhat lighter vein. Demand was extremely strong through May and June, and of course, as is traditional, things ease off a bit during the rains. That's what we're seeing now, but it happens every year. On supply chains, we haven't run into any significant trouble so far. True, we did have issues with the supplier of our engines and with the casting suppliers — particularly engine castings — over roughly the last month, but those suppliers have come up with ways and means to get past it, and hopefully that settles down in July. Beyond that, I don't believe there's been any big supply chain problem up to now, other than inflation and costs. As for demand or the growth picture, we can speak to that. We said on the previous con call as well that at some point ahead of the end of September, we'd like to provide a full-year growth target for our revenue, and that still stands. Having said that, I'd add that we are certainly anticipating growth, since what we observe is that it will arrive through three or four separate avenues.
The Hydra-type crane segment was the main drag—it had been quite weak because of last year's price hikes and technology shifts. That's now beginning to turn around. It'll contribute to our figures. Beyond Hydra, take our construction equipment volumes, road machinery, backhoes, forklifts, tower cranes—in all of these we certainly expect volume growth during this year. Naturally, that comes alongside cranes, particularly the Hydra-type cranes. I think inflation will bring us some additional revenue. The large defense order we secured will also bring extra revenue. Execution begins in August. The first batch should be delivered in August. We do expect growth, though attaching a specific figure to it is a bit hard, since these are unpredictable times with so many geopolitical developments unfolding. The other reason we'd like to hold off until the end of September before issuing full-year guidance is mainly that we've already raised prices 3 times during the first 6 months of this calendar year. First in January, then we raised them again in May, and the largest portion came in June. That process is still ongoing. As you'd expect, there's considerable pushback, and this lands at a moment when the market is at its weakest because of the rains. Buying sentiment is already soft thanks to the rains, and on top of that there's been a striking price increase, all pushed through just 1 month ago.
Overall, growth is what we expect. If I had to attach a figure, I'd point to September — actually, let's say the start of August. Apologies. I'd say the start of September, mid-September, or the best estimate we can provide by the close of September. As I noted in my opening remarks, roughly 40% to 45% of revenue typically lands in the first half. Clearly, what we deliver in quarter two — which will certainly surpass last year and ought to resemble our present quarter one, since quarter one and quarter two are alike — combined with applying that 40% to 45% split for the first half and 50% to 55%, 60% for the second half, will let you derive a range either way. As for putting a specific % growth figure on it, we prefer not to do so, given how conservative we are and in the interest of prudence. That's my answer. Thank you.
Understood. Second, how competition in the industry is affecting us at present. Have you noticed any rise in competitive pressure on us, particularly within the domestic market over roughly the last three or four months?
Not truly. We’ve had competitors in these segments for quite a while, and the level of competition hasn’t changed. Yeah, as I mentioned, the main difficulty—both now and looking ahead—is inflation, for two reasons. First, inflation drives up costs, including the cost of our products, and clearly getting customers to understand and accept that pricing adjustment is hard and takes time. In some cases, at a few %, you simply can’t recover it. Second, when inflation keeps rising and just about everything gets more expensive, it can weigh on economic growth, which is also visible in the various forecasts that leading banks and financial institutions have been issuing. They’ve already trimmed India’s GDP forecast slightly. I think inflation is the biggest challenge, while competitive intensity is unchanged. We’ve done a solid job on that front over the past several years. I’m confident that isn’t a problem at all.
And finally, are you folks noticing any problems when it comes to contractors receiving payment from government departments or on government projects? Is there any sort of issue going on at the moment?
There isn't anything specific that has come to us or reached our awareness, but yes, in certain situations, particularly at the state government level, problems do occasionally arise, though they usually get resolved. That's just part and parcel of operating as an EPC company or a contractor. Some things may be delayed, pushed back, or moved up. We truly don't see a problem or an issue on that front.
Understood. That's all from me, sir. Best wishes going forward. Thank you.
Yes. Thanks very much.
Thanks. We'll take our next question from Aditya with Old Bridge Mutual Fund. Go ahead.
Hello, and thanks for taking my question. Congratulations on a solid set of numbers. My first question concerns the structure of the pick-and-carry cranes market. You mentioned that you anticipate a healthy volume increase in the Hydra segment. My understanding was that after the CEV Stage V emission norms took effect, a substantial share of the market moved to the new generation cranes. That is the reason we are also seeing mix improvement in our crane construction equipment volumes. Looking ahead, what sort of trend should we expect in that market? Will the mix continue improving toward new generation? If not, then would we see an adverse impact on our mix going forward if Hydra cranes pick up at a much faster pace?
Let me take you back to last year, or perhaps the one before — I mean FY 2025. Hydra-style cranes accounted for roughly 60% to 65%, while the new generation made up 30% to 35%. In the last year, since Hydras moved directly from BS3 to BS5 emission standards, their prices climbed far more than those of the new generation, which went from BS4 to BS5. During that same year, the market stood at roughly — I'd put Hydra at slightly under 60% and the new generation at slightly above 40% of total volume share. Now, the Hydra as a machine is central to every industrial zone and industrial base across the country, serving as the primary pick-and-carry, lift-and-shift unit. The new generation, on the other hand, is central to most infrastructure and construction work. Naturally, even after those price hikes, there remains, I'd say, a gap of about 40% — 35% to 40% — between them. Hold on a moment. Perhaps I'm slightly off. Maybe it's 30% to 35% between a new generation crane and a Hydra-type crane. What happened in the last financial year was that when the new emission norms arrived, the retail segment — which mainly uses Hydra cranes and rents them out even to industrial zones — felt somewhat skeptical about the electronic engines and the technology shift, combined with a considerable price increase tied to all these emission norm changes.
All of that has settled over the last, I'd say, seven, eight months. My feeling is that this year the split between Hydra and NG will return to 60/40, with 60 being Hydra and 40 being NG. That covers one part of your question. As for the second part, looking ahead, we believe the shares of Hydra and NG will eventually — perhaps within the next one or two years, maybe three years — end up at roughly 50/50 and should hold steady there. What I mean here is that the absolute count of cranes, of Hydras, sold last year dropped primarily because the retail segment was skeptical. That skepticism is gone now. That's why we feel the Hydra numbers, which have already begun rising over the last three, four months, will come back — and they'll also deliver growth for our company, since the numbers will go up.
Part of what I was asking is this: if Hydra mix gets better this year, would that also create some negative effect on realizations?
I doubt that’s the case. Realization is set to rise for two reasons only. Even within the Hydra line, we’re noticing movement toward bigger tonnages. Over the past three years, four years, we’ve introduced models that are 18 tons, 20, 25 tons larger. Once again, a shift is clearly taking place. In any event, Hydra prices went up last year as a result of changes to emission norms. When it comes to product mix — both Hydra, NG, and inside the new generation itself — we’re again seeing higher tonnages picking up momentum. Overall, I believe average selling prices in the pick-and-carry segment will do nothing but go up.
Alright. Sir, you mentioned that three price increases have happened up to this point. My first question is about that — does this price increase cover all the product segments? And what would the quantum be of the price increase taken so far?
In January we implemented a 1.5% increase, followed by 3% to 4% across the range in March, and then another 5% to 6% in June, varying by model and product. That June increase is still being worked through, so with luck it will be fully in place by the end of July. Taken together, that comes to roughly 10%, and the final 4% to 5% of it is currently being put into effect.
Okay, one final question, sir — sorry, second to last. In this quarter compared with the prior year, gross margin shrank by nearly 140 basis points. Does that stem entirely from the commodity cost headwinds we're up against, or is mix playing a part too?
My guess is that it will most likely concern commodity cost alone, though I believe Mr. Luthra or Mr. Vyom could answer that better if their view differs.
Yeah, it's essentially commodity prices and how they're affecting us, since as you know steel has climbed by almost 20%. And it's not just steel — every other commodity, things like tire, belt, rubber, plastics, all of it has risen. With the geopolitical tensions and everything, prices across the board keep going up and up. That's the reason the gross margin came down. We're taking the steps needed to offset this rise by raising our selling prices, so that we hold our margins for the full year.
For the first time — or possibly the second — practically every commodity, input material, or component we purchase, and I mean any of them, has gone up in price right across the chain.
Alright.
This is a huge rise in commodities. In fact, I'm certain that for every other business too, the procurement folks along with the vendor development groups have been completely swamped as time has gone on, working to keep suppliers satisfied while holding increases to the smallest level they can.
Okay, so one final item from me, sir. We had wanted to expand our tower crane capacity. How is that new facility coming along? Has anything moved forward, have sites been chosen, or where do things stand on that?
Yes. We've already secured a plant for that purpose. Every one of our facilities is prepared. In fact, our intention was to kick things off starting in April. Sadly, the war broke out in March. We'll hold off until September, and then in September we will finally make a decision about when to proceed with the expansion. Depending on how the market looks, perhaps we'll launch it right away, or we could push it back another six months — but it can begin in October, or it can be postponed by another six months. That choice will be made only in September. Having said that, here's what we did last year: we carried out a few small additional arrangements and rearrangements, and we also leased a modest factory space situated very near our current one. Over the past one year, we have in fact managed to raise our capacity to roughly 1,000 cranes at this point. Given the present demand situation, that ought to be enough.
All right, then — where would that land be situated?
This plant is going to sit quite near the facility we already have — roughly 4 to 5 kilometers away.
All right, sir. All right. Thanks. That's all I have to say.
Appreciate it.
Thanks. Our next question comes from Suraj Malu at Cathie Wood. Please go ahead.
Sir, what was the number of backlogged orders sold during this quarter, during last quarter, and in last quarter of the previous year?
I believe we've been running at roughly 150 to 160 units on backhoe loaders, and hold on just one moment. Yeah, around about 150, give or take. 150, 160 units.
Thanks. Sir, in your view, how will this segment develop over the coming three years?
We're quite optimistic. Yes. Up to now we haven't seen success, but we see enormous potential when it comes to exports of backhoe loaders, and in the domestic market as well. We're very hopeful that as we move forward, this could be — and will be — one of the fastest growing segments for us inside the crane construction equipment segment.
Thanks. All right. Thanks a lot.
Thanks. Our following question comes from Raksha Srivastav at Narnolia Finance. Go ahead.
Hello there, and well done on the strong results. I appreciate the chance to ask a question. During the previous quarter, you said the dedicated proof of concept for the backhoe loader segment would be finished by June or July. How much volume and revenue contribution should we anticipate from that during this financial year?
Right now it’s still a work in progress. Yes, we’ve seen some success with something we were attempting around finance companies. Hopefully by July and August we should have complete clarity, but it’s certainly moving in the right direction. We implemented it in three, four specific pockets. Hopefully that should help us grow our numbers at a much faster pace. That’s what I just mentioned in the previous answer — it gives a lot of confidence that, yes, backhoe loaders especially could be our fastest growing segment going forward.
All right, thank you. That is everything from me.
Yes. Thanks a lot.
Thanks. Our following question comes from Aman Saifi at Stallion Asset. Go ahead.
Hello, sir. I hope you can hear me clearly.
Yes, we can hear you. Yes.
Yes. Sir, how much volume did we do in the pick and carry segment this quarter?
Mr. Luthra, do you happen to have the precise volume figures? Just drop us an email, and I believe we'll get all those volumes over to you.
Sending them an email seems like the better approach, I think.
All right, of course. Sir, looking at our unit economics and the realization we get per unit, over the past two to three quarters, how much of that came from the price increase, and how much resulted from the shift in mix?
What we raised prices by back in January amounted to just 1%, 1.5%. The uptick in realization during Q4 of last year would mostly have come from product mix. Even in that final quarter — let me just draw the comparison here. My view is that it's a blend of the two, particularly in Q1, leaning more toward, I'd say, the price increase. Yes, that one also took effect from May onward, though the impact only showed up in June. You'll notice a meaningful step-up in quarter 2 when it comes to the additional pricing action taken during May and June. In the quarter we're in now, Q2, all of us should see an even stronger average price increase. Hopefully that answers your question. If there's anything further you'd like to ask, otherwise we'll go to the next question.
Sir, he's no longer in the queue, so I'll move on to the next question. That question comes from Preet at InCred AMC. Please go ahead.
Thanks for taking my question, sir, and well done on a solid set of results. I’d like to ask about commodity cost pressure: what commodity cost inflation did we see for our mix in this quarter, and what sort of pressure should we expect in the next quarter, Q2?
Over the past three or four months, ever since the war began, we've clearly faced a great deal of pressure. That pressure has been enormous. As I also said on our previous con call, I believe it was in May, led by steel, since steel ranks among our largest inputs. Our sense is that the total inflation will land somewhere around the final effect — which, hopefully, should settle by July or at the latest August in terms of how it shows up in our costing — and that figure could fall anywhere from 11% to 12%. We've already implemented a price increase of roughly 9% to 10%. Perhaps down the road, should more volatility occur and should there be added upward push from all the unforeseen events unfolding globally, with the Iran War escalating further and possibly additional choke points emerging — yes, we expect it to come in around 11% to 12%. We've already moved to a 10% price increase. Going forward, we may need to add another 2% or so, yes. That is, if additional pain hits the system over the coming one, two, or three months, which we can't rule out. I think our next pricing move will hinge on what unfolds during August and September.
Okay, thank you — that's useful. Sir, even with an 11% to 12% increase in commodity prices, we managed to hold our gross margin steady. You noted that during the latter half of June we implemented a further 4% to 5% price increase. Should we expect margins to improve starting in quarter two?
No, that isn't the goal. Our goal is simply to recover what we spend. Margin expansion isn't something we're pursuing. It's just that generally about 2 to 3 months of inventory is moving through the system on the vendor side. The price increase takes effect with a lag of 1 month, 2 months, 3 months, depending on which suppliers. Naturally, we also have some inventory on hand. As it rotates, the full effect typically arrives in 2 to 3 months. Our last price increase would have taken full effect by the end of July. The final inflation impact will likewise land by July and September. Sorry, July and August. The two should more or less line up with each other. We aren't expecting or planning any net gain in our margins. Right now we're just planning to maintain and sustain our profitability, and that is our aim.
Understood, sir. Sir, could you break down for me how much of that 11% comes from raw material cost inflation that we saw in quarter one versus how much we'll see in quarter two, if you could just split it out.
Mayank, would you like to break down that 11, 12%?
Preet, we might not have precise figures, but somewhere around 5% to 6% is likely in Q1. As we move forward, we'll need to watch for the effect in Q2.
Understood. Thanks a lot, sir. I’ll rejoin the call.
Somewhere between 5% and 6% of costing—or perhaps even above that—has come through.
Yes.
7%, 8% has flowed down.
That has carried through into Q1. A portion of it will now extend into Q2, since the price hikes took effect with a delay — certain increases occurred in April, while others took place in June. The full impact will land on us during Q2.
A number of the price hikes haven’t gone through yet — those are set to take effect in July and early August.
So that's the reason our pricing move in the market, along with the price hikes we've passed through from our vendors, will come together over the next 2 months.
Understood, sir. Sir, should we expect to keep margins in that same 15% to 16% range across the full year? What would your guidance be on margin?
Yeah. On an operating EBITDA basis, we came in at just above 15% last year, and our goal is to keep that level and hold onto it. That's our main objective for quarter two and possibly quarter three as well — to preserve our profitability.
Appreciate it, sir. I’ll jump back in a bit later.
Thanks. We'll take the next question from Aniket Maswani at Steptrade Capital. Go ahead, please.
Hi there, can everyone hear me okay?
Yes, we can hear you.
Yes, sir.
I just want to get a handle on your defense segment. Are you still on course to deliver roughly INR200 odd crores of orders in FY 2027?
Yeah, I believe our efforts ought to go beyond that level. There's room for perhaps an additional 10% to 15% on top of this — possibly a bit more than that.
How do you expect the mix of segments to look when FY 2027 comes to a close?
From what we're observing, manufacturing plus logistics should land somewhere in the 40% to 45% range. Infrastructure and construction will also account for somewhere between 40% and 45%, and that figure includes roughly 10% to 12% coming from real estate. Exports contribute about 6% to 7%, and then 3% — no, pardon me, defense will be 5% to 6%, with agri adding about 6% to 7%. The numbers I just listed may total slightly above 100, which is exactly why I framed infra and manufacturing each as 40% to 45%.
So all in all, we can conclude that defense is going to account for roughly 5% to 6% of total revenue for the year.
Yes. We are sure of that.
Did you get any orders during this year that came from the prior quarter? I mean, you were at roughly INR570-odd crore from defense.
Could you please repeat that question for me?
Sir, has the company booked any new orders during this quarter?
There isn't any really large order, but yes—smaller ones continue to come in each month. Orders worth INR2 crore, INR5 crore, and INR1 crore keep occurring. Right, nothing major. We anticipate a repeat of a large order that ought to exceed INR100 crore, hopefully within the coming 2 to 3 months, since work on the first order began during the previous quarter. I believe that over the next 1 or 2 quarters, we expect a repeat order for one of the larger orders. That's one sizable order in the pipeline.
All right, so the new facility you're aiming for around this September-October — what revenue do you expect that facility to bring in?
The specific facility we have underway right now—hopefully within the coming 2 quarters, by the end of December, we should have it up and running. Say end of quarter 3, early quarter 4, whenever that lands. This facility is going to be dedicated to defense manufacturing, the special machines, and beyond that, a couple of additional products that we're currently designing and validating. From this facility taken together, where we're putting in close to about INR40 crore to INR50 crore, eventually we ought to be able to achieve a turnover of, just a second, perhaps close to about INR500 crore.
My apologies — INR500 crores from that facility itself, is that right?
Yes. That plant will be capable of turning over close to INR500 crores.
Alright, I believe that covers it.
We're only building on the land we already had available inside our current complex. This is really the final significant piece of land in that complex—roughly 100 acres. Once it's done, the current complex will be pretty much at capacity. Sure, through some additional modifications here and there, we could squeeze out a bit more capacity. But realistically, the land in our present complex will be used up.
And finally, how much capex in total will that facility require?
That comes to between INR40 crore and INR50 crore. Inside the company, we refer to it as Plant Nine. I'd say capex for the full year ought to land in the neighborhood of INR200 crore to INR250 crore, and the biggest portion of that will be used to take over the land for roughly INR130 crore to INR140 crore — land we had contracted about one and a half, two years ago. INR40 crore to INR50 crore goes into this facility, plus another INR50 crore to INR60 crore for upgradation along with additional robotics and automation, and that's combined with some routine capex maintenance and so on. The number should come in somewhere between INR200 crore and INR250 crore.
All right, that’s fine. Many thanks.
Thanks. Our next question comes from Lakshmi Narayanan, who is calling in from Tunga Advisors. Go ahead, please.
Hello, and thanks. Sir, I have one question about how you handle demand planning. In construction machinery, the usual approach to bottom-up planning leans heavily on dealer projections made at set intervals. What I'd like to understand is how, across the last 3 years, you've brought real-time input from dealers into that process, and what adjustments you've made on the demand planning side so that channel stuffing stays limited and your factory production plans can also be optimized. I just want to get a sense of how your demand planning has actually evolved and what changes you've implemented in it.
Clearly, demand planning is quite crucial, and at our company it’s a highly dynamic affair. Of course, we make plans covering 6 months and 3 months regarding production figures — tentative figures — yet we continue refining those on a monthly basis. Beyond that, simply to serve some extra demand, which unfortunately — fortunately — is a good thing to occur, exceeds what we planned for that month. What we do is, when it comes to our inventory of semi-finished and finished goods at each plant, we keep 10%, 20% additional inventory in that category every month so we can handle any upward fluctuation. Naturally, if, say, a downward fluctuation happens, it gets adjusted during the following months.
Understood. How have you enhanced predictability over the last 4, 5 years? Since we've seen solid growth during the past 3, 4 years, in what ways have you made your demand planning more predictable?
Predictability is really the sole issue we've faced over the past 18 months. Particularly following last year's war—that Operation Sindoor—activity cooled off. Mr. Trump's tariffs are simply toying with everyone's mood across the board. And now the Iran conflict. I believe when such exceptional circumstances come up, that's a key factor in our decision not to provide a growth figure. We're certain growth will happen. We'd like to share that figure. I think it would be wiser for us to be in a position to provide a growth number around mid-September or the end of September, since by then we'll be quite certain. Predictability is one major thing we've been struggling with owing to these unidentified causes, or whatever you'd call these occurrences. That's genuinely painful right now.
Understood. Sir, my second question concerns what will drive growth. Naturally, our PPT actually lists a number of growth drivers. Could you just name two or three very specific ones that you believe will take shape over the next three years — which would those be, and where are you really concentrating your efforts?
Yeah, I think in the current year growth in our country could be subdued. Let me lay out the possibilities in order. Our two biggest growth drivers going forward, I believe, would be inorganic growth and export growth. These, we feel, are going to be really significant growth drivers for the company — inorganic growth as well as exports. At number two, I would put, let's say, the growth happening inside our country — 6.5%, 7% GDP, whatever it is — which will lead to growth in respect of our business. Obviously, the last one or two years have generally been troubled because of various factors. As soon as we see some stability, we feel this is going to be another major driver, which traditionally has been a major driver, and it will help us grow further. This ACE-KATO joint venture will also help us two to three years from now, once the export-ready products, which are totally built on the lines of the KATO base in Japan, are there. They will contribute as well. As I said, inorganic growth and exports in the current scenario, we feel, are going to be the major drivers. Yes, an overall timeframe of three years, apart from these, the growth of our country — basically our infrastructure growth, our manufacturing growth, our logistics growth.
Consider all areas, data centers included. They've begun adding roughly 1.5%, 2% to our revenue as well, which I've taken note of. Some kind of growth is going to continue occurring here in our country.
Sir, just on that point—since all of these are things that already exist—from a top-down view, you can examine India's growth and so forth. Are there any particular items you're focusing on that you'd want to highlight? I mean, for instance, in defense, that's something you've already mentioned. What I'm asking is whether there are two or three things—okay, this state will actually perform well—or very specific items, sir. That's what I was getting at. Also, regarding the KATO joint venture, I'd like to understand the localization plan, and then by the end of three years, what percentage of our production would be localized?
All right. I’ll address that KATO question on its own. Please — when it comes to individual states, I genuinely can’t offer a comment, since each state is engaged in one initiative or another. Yes, the South Indian states along with Maharashtra are doing considerably more than the rest, even Gujarat. Activity is happening without a break, and it’s a process that keeps going. Yes, on prospects, I think the first high-speed rail is already being built, and hopefully something ought to get started within the coming 1 year. Another 7 more DPRs are in the planning stage. That will provide a very large boost. Looking ahead, these data centers will contribute additional momentum, and I’m certain that energy storage too — particularly oil storage facilities for keeping reserve levels — is set to deliver a substantial boost. Nuclear energy as well going forward. Solar is already delivering a large boost at present, if I speak about one segment. If you examine our company’s revenue, just to give it an extra spike, I think inorganic growth would, alongside all the other growth drivers, rank among the significant ones. Inorganic growth, I think over the next 1 to 2 years. We also hold plenty of cash on the books, and we need to deploy it in a meaningful way.
Naturally, we wouldn’t want to make any choice when the business we’re buying lacks a competitive moat—or, put another way, lacks the future prospect of three, four, or six times possible growth in that business. We have identified some opportunities. We are working on them, and hopefully they should get through. Things are happening, and we feel inorganic will give us a lot of help in our effort.
And KATO’s localization as well.
Yes. Look, the KATO business is going to involve 2 kinds of things, the joint venture. The first is our current cranes, and some new models for India are in development, and those will be upgraded and brought up to par in terms of technology and everything regarding KATO technology and the standards. Further localization is going to happen here, since the quantities are going to improve. I would say some hydraulic components and certain other high value items. Yes. Regarding the 100% KATO models, which are also going to be used for exports, apart from the domestic models, there, I think the indigenization level — I feel that since these models will begin to roll out roughly two years from now, the specific export models which are based on Japanese design — there, I think our aim is to reach a localization level of close to 50% to 60%, and we think that's easily possible.
All right, thanks.
There's one more aspect to this venture involving KATO, Japan — since KATO is a major manufacturer not just of cranes but of other construction equipment as well. They're also going to source components and materials out of India, and ACE is meant to provide those services. That creates yet another revenue stream for ACE. A great deal of focus will be placed on localization and on manufacturing within the country.
Alright, that's really useful — thank you.
Yes. Thanks.
Thanks. <<operator_script>> Our next question comes from Divij Jain with 360 ONE Capital. Please go ahead.
Hey, sir. I’ve got one question about the Kato JV, sir. How much capital is Kato Japan putting into the JV? Is its role only that of a technology partner?
The overall investment we're looking at comes to roughly INR200 crores. Kato is contributing INR100 crores of that in cash. Our INR100 crores share comes in kind — through the machines we already have, the models, the technology, and the infrastructure.
Okay, sir. When do we expect production of those heavy-duty cranes with Kato to begin? And is any technology included?
The Indian models we have right now are going to stay in production. From quarter four onward, at some point, once the upgrades are ready with Kato technology, these Indian models—hopefully the upgraded products that meet Japanese standards—we should be able to launch as early as Q4, and that will be an ongoing process. It will continue for one and a half years after that, beginning with Q4 of this year. Roughly one year from now, we will begin producing dedicated Kato models in India for the Indian market as well as for exports. That will take place in year one to two.
Okay, sir. There's no royalty attached to that, correct? Because in any case, we're selling to Kato through split sales.
No royalty applies to the machines being produced for India. There’s a modest royalty — I believe 2%, 3% — and that’s for Kato-specific design models, which Kato will build in India through the joint venture for export markets. Pricing there is almost twice that of Indian pricing. Luthra, is the royalty 2% or 3%?
3%.
A 3% cut of the joint venture's net selling price to Kato, is that correct?
You've got it.
Okay, sir, thank you for that. Sir, one last thing — could you shed some light on the anti-dumping duty? Is there any news on that front?
Could you speak up a little, please?
Sir, do you have any update on the Finance Ministry notifying the anti-dumping duty?
We haven't gotten any leads up to this point, and we're still doing the best we can. We believe there's still a ray of hope somewhere—we haven't entirely put down our guns. We still believe a ray of hope exists.
Sir, just a quick follow-up on that point. Is there any reason you believe they might have pulled the process? My understanding is that the government was the party that had pushed the industry to file for the anti-dumping duty, correct?
Look, the process—we were driven by the Ministry of Finance, which is the Government of India, asking why these Chinese and imported cranes are flooding the Indian market.
Got it.
So clearly, the Ministry of Commerce, through the DGTR, carried out the full investigation, and the duty was recommended. The Finance Ministry is the body that implements these duties. It's only at the final stage that the Finance Ministry didn't act. What it amounts to is that the Government of India wanted it, the Government of India completed the entire investigation and provided the duty. The Finance Ministry did not. I think it has more to do with certain geopolitical matters, because throughout last year, and particularly in the second half of last year, our country was in the line of fire when it came to American tariffs. I think our country was posturing that we are becoming a little pally with China. That's why I think the government has so far avoided putting in place or implementing custom duties. That is my best guess. Beyond that, there is no other logical reason why the Finance Ministry should not make these duties. Every second day, third day, fourth day, you see an article in one of any of the leading newspapers, India is looking forward to be Atmanirbhar, self-reliant, manufacturing in India, export from India, import substitution. Here in a small way, only this current account deficit is only going to be catered.
Beyond that, when machines come into this country, the government and the Finance Ministry will collect revenue through additional customs duty. I think there's no practical explanation—even within the Finance Ministry—for why they wouldn't do it. If it benefits the country and benefits the manufacturer, it's a win-win situation. As luck would have it, the timing of our DGTR order with the recommendations came right after Mr. Modi's visit to China; I really can't comment. I don't want to go that far—I see no reason to. Everyone gains simply by implementing the duty. Our country's capacity and capability when it comes to bigger cranes will not only stay intact—it will grow much faster. I think what's happening right now is a totally uncalled-for indecision, or a wrong decision. Those are my views.
Understood, sir. Thanks very much for walking us through that. Best wishes going forward.
Yes. Thanks very much.
Thanks. We’ll take the next question from Aditya at Oldbridge Mutual Fund. Go ahead.
Hello, and thanks for taking my question. I only have one, sir. You mentioned that the crane industry mix is shifting to 50/50 between Hydra and the new generation.
Moving forward.
Right, as we move ahead — yes. In your view, what additional elements will drive that? After all, the gap in pricing isn't going away, is it?
Right. What happens is that the newer generation of cranes is more stable. They're assumed to be safer. Compared with the old generation or the Hydra type, they're safer. My belief is that some industrial users, at least the larger ones, will shift to the new generation as well. That's why I think it will go and settle at roughly 50/50.
And for us too, the split in our volumes is 60/40, right?
Right. Over the past 2 years, we've also been leaders in the new generation segment. If all goes well, we'll grow our share of that new generation segment before this year is out.
Right. That's fine. Thanks.
Yes. Thanks.
Thanks. <<operator_script>> Our next question comes from Madhur Chaturvedi at MAIQ Investment. Go ahead.
Hello, sir. Good afternoon.
Yes, hello.
Congrats on the solid quarter. I've got a couple of questions, sir, about what you brought up concerning recent events. Sir, whenever we raise prices because of commodity costs, once those commodity prices return to their historical norm, do those increases remain in place? Sir, how does that typically play out over something like a 3, 4-year cycle in our business?
Look, generally what happens is, if the commodity cycle rolls back over, say, the prior six months, eight months.
Correct.
Clearly, some share of that has to be returned, and doing so would be the sensible approach. Should the rise in commodity prices persist beyond that 6 to 8 months, the industry generally tends not to hand it back, since even our suppliers don’t truly give it back either.
Got it. That 6 to 8-month threshold is our measuring stick. Second, one more quick question about what's been happening lately. For us, typically—since you've guided as well—the monsoon's nature means the first half tends to be weaker than the second half, owing to the monsoon and construction activity. In a year such as this one, when the monsoon has been erratic or could be delayed, does that alter plans, or again, is it only a factor if it lasts for a longer stretch? Generally speaking, does this shift how your clients buy?
It does. Honestly, if you look at our country’s economy overall, when the monsoons are normal—or “sufficient” is probably the better word—the economy usually performs well. Yes, if the monsoons fall short, then there is definitely some impact somewhere, particularly in what I’d call tier 2 or rural areas, since construction and cranes and those kinds of things reach there as well. That part of the business certainly gets hit when the monsoons are deficient. When I say hit, I don’t mean anything enormous, but yes, it can cause a 5%, 7%, 10% swing up or down if the monsoons aren’t full or effective, yes.
Got it. That's clear. This impact—and "impact" is a strong term—or this fluctuation…
Right. That's what I was attempting to soften as well. Yes.
Right, got it, sir. I take your point. This variability, sir — would we typically see that effect within a single calendar year, within the same season, or does it come and go? We're able to understand our clients' purchasing patterns — does this have an impact…
That takes place during the latter half of that same year.
Got it. Those typically end up being deferred. Got it.
That shows up already in quarter 3.
Got it. That's great, sir, and many thanks. I have nothing further to add on my side. I appreciate those few questions, and listening to you on this call has been quite informative. I will certainly reach out to you with additional questions. Thank you.
Yes.
Thank you. Ladies and gentlemen, because of time limits, that was our final question for today. At this point I'd like to give the conference back to the management for closing remarks. Over to you, sir.
Economic expansion, all of it. We think we're in turbulent times right now, and I believe every country around the globe — and India especially, given how rapidly its economy is growing — is focused on energy security. At the same time, this whole mess is driving a great deal of inflation. I'd say we're reasonably uncertain about — not reasonably uncertain, rather, I'd put it this way: there is uncertainty regarding how demand will grow going forward. Even with inflation and demand forecasting being somewhat in jeopardy, we believe we're on a growth track during this year. How much growth we'll manage, I think definitely by the end of quarter 2 we ought to be able to project that and then reach a conclusion. All our building blocks for medium-term to long-term growth are in place. Our capacity is in place. We're even continuously working on our costs as well as our process and system up gradation, even as we speak. Hopefully, good things lie ahead for the country and for our company too, along with all other companies. I think going forward, we should be able to create even better value for our stakeholders.
I appreciate that.
<<operator_signoff>>
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Action Construction Equipment Limited transcript - plus 131,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Action Construction Equipment Limited earnings transcripts and 131,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.