Coherent Corp. (COHR) Earnings Call Transcript & Summary
February 4, 2026
What were the key takeaways from Coherent Corp.'s February 4, 2026 earnings call?
In the second quarter of fiscal year 2026, Coherent Corp. (COHR:US) reported record revenue of $1.69 billion, reflecting a 7% sequential increase and a 17% year-over-year growth, driven primarily by strong demand in the AI Datacenter & Communications segment. Non-GAAP EPS rose to $1.29, up from $1.16 in the prior quarter, indicating robust profitability. Management provided optimistic guidance for Q3, expecting revenue between $1.7 billion and $1.84 billion, with non-GAAP gross margins projected between 38.5% and 40.5%, signaling continued operational strength and growth potential.
What topics did Coherent Corp. cover?
- Strong Demand in Datacenter & Communications: Coherent experienced a significant acceleration in its Datacenter & Communications segment, with Q2 revenue growing 11% sequentially and 34% year-over-year. CEO Jimmy Anderson stated, "Given the extraordinary strength and visibility of demand from our customers, combined with our continued rapid expansion and production capacity, we expect a period of sustained strong revenue growth over the coming quarters."
- Indium Phosphide Capacity Expansion: The company is ramping its 6-inch indium phosphide production capacity, with 80% of its target already achieved. This expansion is expected to significantly enhance gross margins, as 6-inch wafers yield over 4x the chips at less than half the cost of 3-inch wafers. Management noted, "We're really pleased with that ramp... and expect this production ramp to support significant revenue growth and margin expansion of our transceiver products over the coming quarters."
- Portfolio Optimization and Divestitures: Coherent completed the sale of its Munich-based product division, which is expected to be immediately accretive to gross margin and EPS. This divestiture is part of a broader strategy to streamline operations, with management stating, "We plan to continue to streamline our footprint and exit additional underutilized and unnecessary sites over the coming quarters."
- Guidance for Q3 FY2026: Management provided guidance for Q3, expecting revenue between $1.7 billion and $1.84 billion, with non-GAAP gross margins projected between 38.5% and 40.5%. This guidance reflects confidence in ongoing demand and operational execution. CFO Sherri Luther emphasized, "We remain focused on expanding profitability with disciplined execution against our long-term financial target model."
- Growth in Industrial Segment: While the Industrial segment saw flat year-over-year growth, management indicated a potential recovery driven by increased orders from semi-cap customers. CEO Anderson noted, "We expect improving demand... which we expect to translate into sequential growth for our industrial business in our June quarter and the remainder of this calendar year."
What were Coherent Corp.'s February 4, 2026 results?
- Revenue: $1.69 billion (up 7% sequentially, up 17% YoY)
- Non-GAAP EPS: $1.29 (up from $1.16 in the prior quarter)
- Gross Margin: 39% (up 24 basis points sequentially, up 77 basis points YoY)
- Operating Margin: 19.9% (up from 19.5% in the prior quarter)
- Operating Expenses: $321 million (up from $304 million in the prior quarter)
- Debt Leverage Ratio: 1.7x (down from 2.3x YoY)
Coherent Corp. is positioned for strong growth driven by robust demand in the Datacenter & Communications segment and effective capacity expansion strategies. The positive guidance for Q3 and the ongoing operational improvements suggest a favorable outlook for investors. However, attention should be paid to the Industrial segment's recovery and the potential impact of rising costs on margins.
Earnings Call Speaker Segments
Thanks, operator, and good afternoon to all of you. Joining me on this call are Jim Anderson, our CEO at Coherent, along with Sherri Luther, who serves as Coherent's CFO. On today's call, we'll walk through a review of the business and financials for the second quarter of fiscal 2026, as well as the outlook for the third quarter of fiscal 2026. You can find our earnings press release in the Investor Relations section of our website, coherent.com. I want to remind everybody that throughout this conference call, we might make projections or other forward-looking statements about future events or the company's future financial performance. We caution you that these statements are predictions grounded in information available right now, and that actual results could differ materially. We point you to the documents the company files with the SEC, including our 10-Ks, 10-Qs, and 8-Ks. Those documents contain and identify significant risk factors that might cause actual results to differ materially from what's contained in the projections or forward-looking statements. This call includes and constitutes the company's official guidance for the third quarter of fiscal 2026. Should we communicate any material changes to this guidance at any point after this call, we intend for those updates to be made through a public forum, like a press release or a publicly announced conference call. In addition, we'll refer to both GAAP and non-GAAP financial measures on this call. By disclosing certain non-GAAP information, management aims to give investors additional information that permits further analysis of the company's performance and underlying trends. For historical periods, we offer a reconciliation of these non-GAAP financial measures to GAAP financial measures in our earnings release and investor presentation, which are available on the investor relations section of our website at coherent.com. I'll now hand the call over to our CEO, Jim Anderson.
Thanks, Paul, and I appreciate all of you joining the call today. Coherent stands as the top global innovator and supplier of photonic technology and solutions, and we find ourselves right at the heart of a remarkable build-out of optical networking infrastructure — one that is fueling enormous increases in data traffic across scale-across, scale-out, and scale-up networks within AI data centers. Thanks to the AI build-out, our December quarter delivered robust growth in both revenue and profit. On top of that, we saw yet another step function jump in bookings, and we anticipate that figure will climb once more during the quarter we're in now. Because demand from our customers is so extraordinarily strong and visible, and because we keep rapidly expanding our production capacity, we anticipate a stretch of sustained, powerful revenue growth across the quarters ahead. Specifically, we anticipate that sequential revenue growth will stay strong in both our March and June quarters, and we anticipate our revenue growth rate for fiscal 2027 will be higher than the rate for fiscal 2026. The main growth drivers we identify for the quarters ahead include increases in both 800G and 1.6T transceivers, gains from ramping new offerings like OCS and CPO solutions, and continuing exceptionally robust demand for our products serving DCI and scale-across. Beyond that, we are now receiving demand signals pointing to an uptick in growth for our industrial business during this calendar year, powered by hefty orders from our Semicap equipment customers. All told, we feel enthusiastic about the growth picture for the quarters ahead. We are equally committed to generating meaningful operating leverage, and we anticipate continuing to produce EPS growth that outpaces our projected revenue growth rate by a wide margin. With that summary in place, allow me to share further specifics about the quarter just completed and our expectations going forward. Moving to our Q2 operating results, revenue rose 9% quarter over quarter and 22% year-over-year on a pro forma basis, which leaves out revenue from the aerospace and defense business we recently divested. Non-GAAP gross margin widened 24 basis points quarter over quarter and 77 basis points year-over-year. Revenue growth paired with gross margin expansion produced non-GAAP EPS growth of 11% quarter over quarter and 35% year-over-year. Now I'll share a few highlights from our two operating segments. Within our data center and communication segment, which now represents more than 70% of our revenue, sequential growth accelerated, with Q2 revenue up 11% quarter over quarter and 34% year-over-year, powered by robust gains in both the data center and communications markets. In our data center business, we achieved a significant acceleration in sequential growth, as Q2 revenue rose 14% quarter over quarter and 36% year-over-year. That faster sequential growth in Q2 came from truly outstanding execution by our production teams. Because demand is exceptional and our capacity is expanding quickly, we anticipate double-digit sequential growth in data center once again in both our March and June quarters. Since this ranks as our biggest and quickest-expanding line of business, I want to share a few more specifics about where things stand on both the demand side and the supply side of our data center operations. Growth in 800G as well as 1.6T transceivers fueled the revenue increase for data centers in Q2. During Q2, our data center bookings jumped up yet again in step-function fashion, and the book-to-bill ratio came in above 4x, since customer demand keeps climbing and buyers are placing orders farther into the future, which gives us solid visibility into upcoming quarters. Our portfolio's strength, together with vertical integration and a growing U.S. manufacturing footprint, hands us a distinct competitive edge with customers; we anticipate that revenue growth in the present quarter will come from a mix of gains in 1.6T and 800G transceivers, plus growth in our OCS systems. Across numerous customers, we observe robust demand for our 1.6T transceivers, and we still anticipate that both 800G and 1.6T will expand substantially in calendar 2026. Over the next several quarters, we expect 1.6T to ramp up considerably, with the initial stage of that ramp powered by our EML and silicon photonics-based transceivers, then followed by our 200G VCSEL-based 1.6T transceivers ramping during this calendar year's second half. Turning to supply, in order to handle the tremendous demand growth, we are putting money into quickly scaling up our production capacity. As one example, we boosted our indium phosphide production capacity considerably in Q2, and we are carrying out our plan, right on track, to double internal indium phosphide production capacity before this calendar year's fourth quarter ends. As a reminder, ramping six-inch wafer production is what drives our indium phosphide capacity expansion. A six-inch wafer, when set against a three-inch wafer, yields over 4x as many chips while costing under half as much. Our production team is performing exceptionally well in ramping six-inch indium phosphide output, and I want to use this moment to thank the team for carrying out the plan ahead of schedule in Q2. At two locations, Sherman, Texas, and Järfälla, Sweden, we are ramping production simultaneously. On six-inch indium phosphide, we are in production with three distinct kinds of key transceiver components: EMLs, CW lasers, and photodiodes. Yields on our six-inch lines keep surpassing those of our three-inch production lines; beyond that, we have several suppliers of six-inch indium phosphide substrate, and we have locked in committed substrate supply that backs the doubling of capacity we expect by our December quarter. In brief, we are quite happy with how we've ramped the first six-inch indium phosphide production lines anywhere in the world, and we expect this production ramp to underpin considerable revenue growth and margin expansion for our transceiver products across the quarters ahead; we likewise expect to keep supplementing internal indium phosphide capacity by continuing to source from outside suppliers. Take EML supply, for instance. What we got from outside vendors went up quarter over quarter in Q2, and thanks to ongoing long-term collaboration with our main external suppliers, we anticipate another increase in the present quarter and across this calendar year. Beyond that, we keep putting money into growing our capacity for assembling transceiver modules. Our production footprint is being scaled up in Malaysia, Vietnam, and additional sites. On the whole, I'm quite happy about how our production capacity keeps growing to keep pace with the swift rise in demand. I feel just as enthusiastic about what we're achieving with other key data center offerings and technologies. More specifically, I'd like to share updates on our CPO and OCS products, both of which we believe will be major drivers of our growth and profitability over the long term. Transceiver technology platforms kept on evolving, and we're in a strong position as we keep advancing work on LPO, LRO, CPO, and MPO-related products and technologies, with a rising number of engagements spanning a broad range of customers. Notably, we just landed an exceptionally large purchase order from an AI data center customer that leads the market, for a CPO solution incorporating our new high-power CW laser, which started sampling last year. Besides the superb performance of this solution, one key reason the customer chose to partner with Coherent was that our high-power CW laser comes off our six-inch indium phosphide line at our Sherman, Texas, facility.
We anticipate that this major design win will bring in its first revenue near the close of this calendar year, followed by a much larger revenue contribution in the next calendar year and afterward. We additionally hold engagements with several other customers spanning both indium phosphide and 200 gig VCSEL-based solutions for CPO and MPO applications. During Q2, we likewise witnessed robust momentum for our optical circuit switch platform, which relies on our differentiated non-mechanical liquid crystal technology. OCS backlog increased sequentially in Q2, and we currently have more than 10 customer engagements. Shipments and backlog encompass both 64 by 64 and 320 by 320 system sizes, with the bulk of the backlog tilted toward the larger system size. We anticipate OCS revenue will rise sequentially in the current quarter and the quarters ahead as we scale production capacity as quickly as possible to satisfy rapidly growing demand and the over $2 billion of expected addressable market opportunity for this platform over the years to come; within our communications market, Q2 revenue climbed 9% sequentially and 44% year-over-year. Growth remains fueled by our products for data center interconnect and scale-across, along with strong growth in traditional telecom applications. We anticipate our communications business will grow sequentially in the current quarter as well as our June quarter. The strength we observe in communications is broad-based in terms of both products and customers. We keep seeing exceptionally strong demand for our products addressing the data center interconnect market opportunity. These encompass our ZR and ZR+ coherent transceiver products, as well as lasers and other components that we sell to system OEMs. For instance, we recently landed a significant multiyear design win with a leading DCI OEM, which utilizes Coherent's industry-first, uncooled three-pin micro-pump solution. We're also witnessing strong demand in our traditional telecom business, fueled by ongoing market recovery and new product introductions, such as our new award-winning multi-rail technology platform; we are additionally experiencing very strong demand across our broader communications product portfolio, including pumps, amplifiers, line cards, and systems. Shifting to our industrial segment, revenue rose 4% sequentially and was flat year-over-year on a pro forma basis, excluding revenue from the recently divested aerospace and defense business... Sequential growth in Q2 was fueled by our industrial lasers and engineered materials product lines; we anticipate the industrial segment will be roughly flat sequentially in the current quarter on a pro forma basis. Nevertheless, looking forward, we expect improving demand. As an illustration, we saw a significant increase in orders in Q2 from our Semicap customers, which we expect to translate into sequential growth for our industrial business in our June quarter and the remainder of this calendar year. During the latest Photonics West Conference, we showcased several strong long-term growth opportunities across our industrial product lines. These include cooling solutions for data center XPUs that leverage our 300 mm silicon carbide and thermoelectric technology, thermoelectric generators that boost data center energy efficiency by recovering waste heat, excimer laser annealing systems designed for Gen 8 OLED fabs, high-power lasers supporting direct fusion energy generation, and excimer lasers used to process superconducting tape for magnetic fusion applications. This broad array of differentiated offerings puts our industrial business in a position for meaningful long-term growth. Now, I want to give you an update on our portfolio optimization initiative. Last week, we closed the sale of our Munich, Germany-based product division that manufactures tools for materials processing. That divestiture should be immediately accretive to gross margin as well as EPS. Because of this transaction and other streamlining efforts, we exited 10 sites during the past quarter, bringing the cumulative count of sites either sold or exited to 33 across roughly the last six quarters since this initiative started. We intend to keep streamlining our footprint and to exit more underutilized and unnecessary sites in the quarters ahead. To sum up, we posted strong revenue and EPS growth in Q2, and we expect fiscal 2026 and fiscal 2027 to be strong growth years for Coherent, thanks to exceptional customer demand and the swift expansion of our production capacity. I want to thank my Coherent teammates for their strong execution and the incredible innovation they deliver every day for our customers. I'll now hand the call over to our CFO, Sherri Luther.
Thanks, Jim. During Q2, we kept generating robust double-digit top-line growth versus a year earlier, along with an expanding gross margin and solid profitability. Capital allocation remains something we concentrate on, and we kept our debt leverage ratio under 2x. Now I'll walk through a summary of what we delivered in Q2. Revenue for the quarter hit a record $1.69 billion, which represents a 7% rise from Q1 and a 17% increase compared with the same period last year, fueled by expanding demand in AI data centers and communications; on a pro forma basis, once you strip out revenue tied to our aerospace and defense business that we divested in Q1, Q2 revenue climbed 9% from the prior quarter and 22% versus a year ago. Our non-GAAP gross margin in Q2 came in at 39%, which is 24 basis points better than the preceding quarter and 77 basis points better than the equivalent quarter last year; we're still carrying out our plan to expand gross margin, and we delivered both sequential and year-over-year gains there, mainly within the data center and communications segment. Those gains came from lower product input costs, efficiency improvements tied to faster cycle times in manufacturing, and better yields. Pricing optimization also kept making a meaningful contribution to our gross margin expansion. Non-GAAP operating expenses for Q2 totaled $321 million, versus $304 million in Q1 and $283 million in the same quarter a year earlier. Operating expenses measured as a share of revenue fell to 19%, compared with 19.2% in Q1 and 19.7% in the year-ago quarter. SG&A expense as a share of revenue dropped to 9.6% in Q2, versus 9.8% in the prior quarter and 10.2% a year earlier, reflecting the ongoing progress we've made on efficiency and greater leverage within SG&A. We've achieved substantial progress on consolidating our ERP systems, and we anticipate that the bulk of the company will operate on one ERP platform by the close of this fiscal year; beyond that, we're carrying out low-cost region efforts across our G&A functions, which should keep delivering benefits through the rest of this fiscal year and even more substantially in fiscal year 2027. The quarter-over-quarter and year-over-year rises in R&D occurred mostly in the data center and communication segment, since we remain focused on investments offering the best ROI that fuel the company's future growth. Our non-GAAP operating margin for Q2 was 19.9%, versus 19.5% in Q1 and 18.5% in the same quarter last year. Non-GAAP earnings per diluted share in Q2 reached $1.29, versus $1.16 in Q1 and $0.95 a year earlier. On capital allocation, we held our debt leverage ratio at 1.7x, which is lower than the 2.3x we had in the year-ago quarter. Capital expenditures during Q2 amounted to $154 million, versus $104 million in Q1 and $106 million in the same quarter last year; our priority is backing the extraordinary customer demand we're seeing in data center and communications. So because of that, we're moving quickly to grow our capacity, and we anticipate that capex will rise quarter over quarter through the rest of this fiscal year. We've made solid headway on making our balance sheet stronger, and that includes bringing down our debt leverage by a meaningful amount, refinancing our debt, and getting our working capital into better shape. Given a robust balance sheet and our emphasis on lifting profitability, the company is in a strong position to meet the extraordinary demand from customers through investments aimed at swiftly scaling up our production capacity. As Jim mentioned, at the close of last month, we completed the divestiture of our product division located in Munich, Germany, which produces tools used for materials processing. For context, across the last 4 quarters, that business brought in average quarterly revenue of $25 million, and its gross margin sat well under Coherent's corporate gross margin. This transaction will cut our employee headcount by roughly 425 employees. We intend to apply the money from this divestiture toward lowering our interest expense by paying down debt, and that will be immediately accretive to both our gross margin and EPS. Now I'll move on to guidance for the third quarter of fiscal 2026. Our Q3 outlook factors in $5 million of revenue from the stretch of time before the Munich product division sale closed at the end of January; we anticipate revenue landing between $1.7 billion and $1.84 billion. We anticipate non-GAAP gross margin coming in between 38.5% and 40.5%; we anticipate total operating expenses ranging from $320 million to $340 million on a non-GAAP basis; we anticipate the tax rate for the quarter falling between 18% and 20% on a non-GAAP basis. We anticipate EPS in the range of $1.28 to $1.48 on a non-GAAP basis; to wrap up, I'm extremely pleased with the robust results we delivered in our second quarter. We stay committed to growing profitability through disciplined execution against our long-term financial target model. We're enthusiastic about the considerable growth trajectory that lies ahead. This momentum strengthens our confidence in generating long-term growth and lasting value creation for our shareholders. That brings my formal remarks to a close. Operator, please open the call for Q&A.
Hi there, and thanks for letting me ask a few things. Jim, I'm glad to hear the leg is on the mend and doing better than before. To start with demand — you gave us some book-to-bill numbers, but how would you characterize how long that visibility stretches? Put another way, how many quarters or years ahead are customers actually giving you a view into their needs? And on a related note, how are you thinking about adding capacity, particularly on indium phosphide — what's the plan there, and specifically, what role should six-inch play in that build-out? I've got one more question after this. Thanks.
Sure thing, Samik. And yes, the leg's much improved. I appreciate you asking. About the demand piece — yeah, I'd describe what we're seeing and the visibility we have as extraordinary. If I pull out a few notable points from the prior quarter, for instance on our data center business, the pickup in our sequential growth rate — 14% sequential growth — really made me happy. And then, as I noted in the prepared remarks, we also recorded a book-to-bill ratio above 4x. Demand has been incredibly strong, and bookings are now reaching farther out than was previously the case, which hands us fantastic visibility. First, our order book is full for the remainder of this calendar year, and nearly all new orders coming in are for calendar 2027. That means calendar 2026 is essentially sold out for us, while calendar 2027 is filling up extremely fast. This matters a great deal because it hands us excellent forward visibility. On top of that, our largest customers are providing us with very thorough long-range projections. Frequently, those projections stretch out two or three years. We're receiving projections extending through calendar 2028, and again, that's excellent when it comes to visibility. The third point I'd bring up regarding visibility involves the long-term supply agreements we've either already signed with customers or are currently finalizing. You know, under such an LTA, our customers get assurance of a set supply quantity, and in return, they commit to a guaranteed level of demand. Frequently there's also some form of financial commitment on the customer side, such as funding for CapEx and similar items. Taking everything into account, I'd say the clarity we have into how the business is performing has never been stronger, and that leaves us feeling very sure about the growth ahead. As for the other half of what you asked, about scaling up indium phosphide capacity, I'm genuinely happy with how the team has delivered on moving to six-inch indium phosphide. One number I watch very carefully to measure where we stand is wafer starts. Remember, the goal we laid out three months ago was to have twice as much indium phosphide capacity in place by the time this calendar year ends. If you check the volume of wafer starts we're running in the current quarter, we're basically already sitting at 80% of the capacity we're aiming for. In other words, we're launching wafers at 80% of our objective to double capacity, which is truly impressive and, honestly, ahead of where we expected to be. Actually, during the prior quarter, the number of wafer starts we initiated more than quadrupled as we moved from our September quarter into our December quarter. So to me, that serves as a very solid and meaningful leading indicator of our progress on the indium phosphide ramp — reaching 80% of the target for initial wafer starts. That said, this covers the front end of the production line, right? There's a lag of several quarters—or several months—between when wafer starts happen and when the resulting products are finished and sent out to customers. From the moment a wafer is started to when something such as a transceiver gets shipped, the usual span is about six months. Even so, that serves as an excellent leading indicator for how our indium phosphide ramp is going. We're already benefiting this quarter from the first production that kicked off during the September quarter of last year. So that ramp has me quite pleased. And once more, the reason we pay so much attention to it: a six-inch wafer compared with a three-inch wafer produces over 4x the number of chips while costing under half as much. That increase went really well, and we're happy about it. Samik, I think you had something else to ask?
Yeah, yeah, real quick. On OCS — obviously demand is strong, but is there any way you can quantify for us how big the backlog is from those 10 customers, or perhaps in terms of a material impact on revenues, how should we think about when it reaches, say, more than $100 million in revenue, timing-wise? Would that be this fiscal year or the next one? How should we think about it? Thank you.
Yeah. Thanks, Samik. Yeah, when it comes to OCS, this will sound like a familiar refrain, but once again, demand is very strong. Right now we're highly focused on the production ramp. So the backlog looks good; it was up in the December quarter compared with the September quarter. We expect revenue to ramp up and grow this quarter, and really, for revenue to ramp across this calendar year and into next year. We're entirely focused — 100% — on ramping capacity and production as quickly as we can. Demand is very strong; we're engaged with more than 10 customers. The market's size has only expanded since we assessed it roughly a year ago, so it's a tremendous opportunity, and we're ramping production as fast as we can; we'll probably provide some more specific milestones regarding revenue as we move through the year, but it will certainly contribute to our revenue growth across this calendar year and certainly be a contributor next year as well.
Understood. That's excellent. Excellent. I appreciate it. Thanks for giving me the chance to ask my questions.
You're welcome.
Thank you so much for fielding the question. What I first wanted to inquire about is that you mentioned some encouraging momentum regarding the 1.6 T, which I suppose represents what I'd describe as an up-and-coming cycle; so perhaps you might offer a few milestones so we can grasp the point at which that reaches 100 million each quarter? And what does the competitive situation look like for that offering? And after that I have a longer-horizon item that I'll ask about next.
Yes. Appreciate it, Simon. So to begin with, for both 800G and 1.6T, our expectation is that they keep expanding during this calendar year. Last quarter we observed growth in each of 800G and 1.6T. This quarter, once more, we anticipate expansion in both. As you know, 800G remains the largest share of revenue. Our expectation is that it expands versus the prior year during this year. 1.6T is expanding at a considerably quicker rate, though it expands from a base that is smaller than 800G's. What I'd say is that the 1.6T ramp has sped up. Customer demand has sped up. We're ramping alongside several customers. For us, throughout this year, I regard that as a genuinely essential primary growth engine. Breaking out revenue according to data rates isn't something we usually do, yet those two, 800G and 1.6T, will without question serve as essential, essential growth engines for the company, during this year, this calendar year; and 1.6T will keep ramping into the next calendar year as well; in fact, a great many of the orders we currently see are indeed for 800G, yet an enormous quantity of orders involve 1.6T, and so that's wonderful. That gives us excellent visibility concerning demand going forward. And perhaps I should also note what I said during the prepared remarks, namely that our first ramp is propelled by EML-based transceivers for 1.6T along with silicon photonics; however, we anticipate VCSEL-based 1.6 transceivers beginning to ramp during this year's second half. So I'm genuinely pleased with the progress along with the rate and pace and the growth that lies ahead for 1.6T.
Great, and I also picked up that you've secured a qualification related to co-packaged optics. So I want to ask what comes after that, specifically around scale-up possibilities — has the point arrived when you're working with customers on scale-up architectures? Perhaps you can help us understand how to frame that market potential, which I'd assume is still years off, though I'd bet you're already involved on the engineering side. Thanks.
Yes, absolutely. Regarding that CPO purchase order we booked — a very large one — it covers a solution built around our high-power CW laser. We're quite happy about it; at first it will go into scale-out, yet we anticipate that eventually it will drive scale-up deployments. And I'd note that there's quite active involvement and design win momentum when it comes to scale up, CPO, and every kind of CPO-related solution for scale up, spanning several customers. I'd describe those as highly active, deep engagements. As for how big the scale-up chance is, honestly it's hard to put a size on it. It's enormous. A number of the projections we've gotten from our customers are extremely large, correct? Consider that, within the scale-up chance, all of that networking as it stands now — the networks inside racks — runs on electrical. As those networks shift to optical across the next several years, the volume of optical content we capture in the scale-up portion of the network is simply enormous, and our position is very strong. There are a few distinct routes by which we intend to serve customers there. Obviously we can serve them at the component level, delivering high-power CW lasers, detectors, fiber optical cable; yet we also intend to serve those customers at a higher level too. For example, external laser sources, the pluggable laser sources that plug into the front panel, plus CPO module assemblies, and so on. So we'll back that market in multiple ways, and we view it as an enormous growth chance in scale-up. And I wouldn't say it's years away. My sense is it arrives sooner, given the plans we're seeing from our customers.
Great. Thank you very much.
Thank you. Jim, I would like to continue where we left off regarding CPO. It is wonderful to learn of that big order and the schedule spanning the close of this year through the following one. At a high level, what is your thinking on content within CPO compared with the momentum you currently observe in 800G and the early-stage strength of 1.6T modules? Do you believe these will... My sense is the general view holds that such technologies will exist side by side, yet I would really value hearing your perspective regarding the content possibility and the growth possibilities as you project ahead to 2027, when CPO scales up. Thank you.
Yes, thank you, Ruben. Yes, our perspective is that this is truly supplementary. Our framework for it is that pluggable transceivers are going to stay the leading form factor in, without doubt, scale-across as well as scale-out networks, at minimum until this decade is over, correct? Thus we anticipate quite robust expansion in those pluggable formats, across scale-across and scale-out, in the years ahead. And regarding CPO, what we observe is that CPO is beginning to be rolled out first in scale-out, and that is happening. That purchase order we acquired, and so on, reflects it; however, our conviction is that CPO — the major expansion in CPO — is in fact propelled by scale-up, and that represents a highly concrete possibility given the customer engagements we currently have. And that will..; our belief is that the scale-up CPO possibility is going to overshadow the possibility in scale-out. It is going to be larger by orders of magnitude. Consequently, we regard that as entirely additional TAM for the optics sector overall, and definitely for our company too. Because that network remains 100% electrical at present, all that optical content in scale-up constitutes additional TAM.
That's useful. Thanks, Jim. A quick follow-up, since you mentioned the 800G and 1.6T mix. I'm just curious — I'd imagine you're beginning to see some demand for 200G differential EMLs and similar things. As you look at the rest of this year and into next year, and think about the mix, what happens to margins as you get close to 40% gross margins on the modules themselves?
Yeah. First, we expect the 1.6T gross margins to be higher. Generally, what we observe across the industry is that every new data rate carries higher ASPs than the one before it. So we expect that with 1.6T. The 1.6T ASPs we're seeing are above those for 800G. And generally, particularly early in a data rate's life cycle, gross margins are higher, so we expect 1.6T gross margins to be higher; and so we see the 1.6T ramp as accretive to our margins. And then certainly, also-
Apologies.
Yeah, and one more thing to mention — part of what's going on there is that, as you're aware, while we bring up our six-inch indium phosphide capacity, which backs both 800G and 1.6T transceivers, that six-inch capacity also serves as a gross margin driver for us within our transceiver business.
Great. Thanks for the details, Jim.
Thanks for taking my question. Jim, during your opening remarks, you mentioned that the book-to-bill ratio came in above 4x, driven by rising customer demand, with buyers booking orders increasingly far into the future. Clearly, there are many strong opportunities within the data center segment, but perhaps you could take a moment to break down what makes up that backlog. Which part shows the most momentum? Of course, you have the OCS portion, the module portion, and the laser portion. It might be useful if you took a moment to break down those areas and help us understand which ones are driving the bulk of that momentum, especially since we keep hearing specific figures from other companies in the sector. I realize that isn't something you typically provide, but is there anything you can offer that would help us out here?
Yes. Appreciate that, Thomas. Regarding the book-to-bill figure from the prior quarter, I'd characterize the bulk of it—really the overwhelming share—as coming from orders for 800G and 1.6T transceivers. What we saw was a mix: the expansion we'd anticipated in 800G, which kept climbing and may have even come in somewhat ahead of our forecast, plus 1.6T picking up speed. So orders in both 800G and 1.6T were exceptionally robust. We're looking for that momentum to carry over into the present quarter too. On top of that, OCS bookings made a contribution during the last quarter. And when I consider where we are now and what we anticipate on the bookings front, we're expecting yet another exceptionally robust quarter. Honestly, what's driving this comes down to the four items I listed earlier — with 800G and 1.6T transceiver orders doing most of the work. As time goes on, the 1.6T side of those bookings keeps taking a bigger share, and on top of that there's CPO and OCS too, so within the data center portion of our bookings those are the key forces. We're also seeing a lot of momentum on the communications side. The expansion in our DCI, meaning Data Center Interconnect, offerings has been extremely robust — it's outpacing the growth rate for communications as a whole. Even so, demand stays solid outside of DCI in what you'd call the conventional telecom area. That's another area where our booking activity has been quite robust.
Thank you, Jim. Following up on that, you mentioned indium phosphide capacity will double by the time the year ends. Your competitor referenced 40% increases, which they're essentially racing through quickly; it appears the industry is adding quite a bit of supply. Broadcom is also discussing some extra capacity. Could you discuss when you expect the industry will receive the product it requires? Are we still at a point where the industry faces a shortage? And considering those incremental capacity additions, when do you anticipate reaching equilibrium in that business? Thanks.
Yes, excellent question. It feels as though each quarter we believe we're about to catch up, yet demand continues rising. So, I don't expect supply and demand to return to balance during this calendar year. I don't believe it will occur next calendar year either. And if the forecast we're receiving from customers regarding indium phosphide laser supply that they require for scale up holds, I think we might face a very sustained, lengthy stretch of supply-demand imbalance on indium phosphide, which is precisely why we're extremely focused on ramping our six-inch capacity as fast as we can. That near-term objective is to double our capacity by the end of this year, but we're pursuing goals beyond that which are very aggressive regarding our continued ramp of indium phosphide capacity. The demand we're seeing from the customers absorbs all of that capacity and then some.
Operator, if we could go on to the next question.
Ezra Weener here, filling in for Blaine. Appreciate you taking my questions. First off, clearly component pricing for the parts you source externally is going up, yet at the same time you're signing LTAs. Could you speak a bit about pricing and how gross margins factor into that picture?
Yeah, regarding input cost — I believe you mean input cost relative to our pricing. Yeah, what we're observing is somewhat higher pricing input costs when it comes to externally sourced items such as EMLs, though our internal indium phosphide ramp genuinely offsets that, correct? So I'd characterize the net as, you know, we're in a far stronger position across the coming quarters as we keep rapidly scaling our indium phosphide production capacity, and that gives us a gross margin benefit. So the net works out positive for us. So we feel fairly good about where we stand when it comes to indium phosphide cost. Another angle: whenever the market price of indium phosphide rises, that makes the indium phosphide we source internally that much more valuable, right, as a differential. And then, you know, as far as our own pricing goes, you know, we keep seeing, you know, the ability to keep optimizing pricing. I think Sherri noted in her prepared remarks that some of our gross margin improvement last quarter came from pricing optimization. We keep seeing opportunity to optimize pricing, particularly in an environment where, where we're, where demand is very strong. And so, you know, we believe we're in a good pricing environment across, all of our businesses. Maybe, Sherri, would you like to comment further on the effects on gross margin, or did that cover it?
Yes, absolutely. There are a few points I could mention. So, if you consider the gains we recorded in gross margin — whether measured quarter to quarter, one period to the next, or against the same quarter a year earlier — several factors drove that. Cost reductions were definitely among them: we benefited from cheaper input costs for products in the data center and communications fiber operations, and that business was in fact where the size of that advantage showed up most. We also enjoyed reduced input costs on important items — the bigger pieces of our BOM — so that was genuinely encouraging. Beyond that, we achieved better results in the manufacturing process, which allowed for higher throughput along with gains in efficiency and yield. Once again, that occurred in the data center portion of our operations, which was also very encouraging. Turning to pricing optimization, we in fact recorded, one period after another, a still larger gain there across multiple parts of our operations. All of these count as central pieces of the gross margin expansion plan we introduced when we held our Investor Day last year, and we keep our attention fixed on it. I'm truly happy with how far we've come on that front so far. One more thing worth noting: taking the 39% gross margin we delivered this latest quarter and setting it beside where our FY 2024 gross margin stood, we have in fact lifted gross margin by roughly 470 basis points via the strategy components I just walked through. So I'm genuinely happy with the headway; in my view we remain in the early stages as we keep pushing toward that target above 42%.
Understood. Thanks. For my second question, I'd like to ask about the six-inch ramp, the schedule for it, and how things look over the long term. So in what way should we anticipate that stacking up? And looking further out, do you anticipate that six-inch will account for the heavy majority of your capacity? Also, could you discuss a bit the benefit of that versus peers?
Sure. Regarding the second portion of your question, looking long term, yes, basically every bit of capacity we are bringing on at present is six-inch; we're bringing on a small amount of three-inch, yet past that, six-inch capacity makes up the vast majority, and that will keep going; so as time passes, six-inch capacity will simply turn into an ever larger percentage. And if you consider that we're doubling capacity year-over-year and all, nearly all of that originating from six-inch, another way to view it is, once this calendar year ends, roughly half our capacity is going to be six-inch, and it will increase from that point in subsequent years. Regarding how the ramp is progressing, as I mentioned, when it comes to wafer starts, we've already reached 80% of that target to double our capacity in this year; we intend to greatly grow it past merely doubling capacity in the years ahead. It's somewhat too soon to discuss that, but as we progress through this year, I'll provide some guideposts regarding future years and the anticipated ongoing ramp of indium phosphide. And then I believe you inquired about cost structure advantage. Yes, so the fundamental cost structure advantage is a six-inch wafer versus a three-inch wafer. You obtain, you know, more than four times as much product from that wafer at under half the cost, so it's an enormous cost savings. And that has been a crucial element in, I think, the reason, you know, our customers have been choosing us too. So for example, that very large, high-power CW purchase order we just got, a major reason for it was that high-power CW laser is going to be manufactured on six-inch indium phosphide and it will be produced in Sherman, Texas, U.S.-based manufacturing. So that is certainly something that's playing into our customers' decisions about why to pick Coherent, is that edge in six-inch capacity and where it's located.
Understood. Many thanks.
Appreciate you fielding my question, and congratulations on those results. So, Jim, my first question, I suppose, also concerns the indium phosphide capacity ramp; is there any way you could bring us up to date right now regarding the mix of indium phosphide transceivers that you've developed internally? From what I recall, you got to roughly 50% before. Any detail on where things stand currently? And maybe related to that, do you have a target in mind over the longer term, regarding what mix you're envisioning?
Yes, thank you, Atif. What we've communicated previously, what we've told you, is that historically, our volume of indium phosphide from internal versus external supply — the bulk of our indium phosphide, for example lasers, comes from internal sources. And looking ahead now, I would anticipate, simply because of how quickly our six-inch production is moving across the coming — you know, this year and years after — I think the share sourced internally is going to increase as time goes on. That being said, we do expect to keep using outside suppliers too. We believe there are, you know, solid reasons for doing so, both with customers and for supply chain resiliency, so we expect to keep using external sources. But as time passes, you know, internal sources are going to account for a larger portion of supply.
Understood. That is quite useful. My next question concerns OCS. It's encouraging to learn that your engagement there keeps expanding. My recollection is that it stood at 7, and has since risen to 10. So it would help if you could take us back through those earlier 7 — what sort of workload were those 7 engagements, or projects, tied to? And the same for the 3 additional ones. Any detail on whether they're centered on AI, or what sort of workload they connect to?
Yes. Appreciate it, Atif. Hi. Sure, I'll frame it around the applications we're observing in OCS. Initially, as I recall, the OCS adoption we saw was in places where OCS has traditionally been deployed, say within the spine portion of a network, or in a redundancy-style application. Yet as we've worked with additional customers, and as we've gone deeper with customers we already had, there's been what you might call a widening of the applications we're witnessing for OCS. So while perhaps at first, the bulk of applications sat in the scale-out section of the network, we are definitely now witnessing OCS applications even within the DCI section of the network. Since we're heavily engaged with customers regarding their scale-up plans — that is, optical inside scale-up — we're now seeing customers, you know, discussing the use of OCS inside scale-up networks too. And so it's genuinely been a widening not only of customers, but of applications. That's the reason, you know, when we sized this market 12 months ago, we sized it at roughly, I believe it was roughly $2 billion by the close of this decade. We probably sized it too low, and were we to size it again today, it would be comfortably above $2 billion. So we've watched customers and applications simply keep increasing.
Thanks; that's wonderful as well.
Hey, everyone. Many thanks. I simply wanted to return and inquire regarding your capability to produce all of this material. Clearly, demand is extremely strong at the moment. I believe we covered the indium phosphide topic quite thoroughly, but I'm just wondering, you know, about transceiver supply in Malaysia and Vietnam. Clearly, you also have a sizable telecom business. I'd be interested in, like, how things appear regarding utilization rates. Is your capacity sufficient? Do you have to add capacity? And then any indication whether you might also consider using outsourcing. Thanks so much.
Yes, thank you, George. Yes, we have been more focused on bringing you up to date regarding indium phosphide capacity since that has sort of been the bottleneck throughout the industry, and we have been limited by it; but at the same time, we have definitely been constructing capacity for, say, transceiver assembly and test. So I mentioned during the prior quarter that in Malaysia, we launched a new site in Malaysia, a second site in Penang, Malaysia. We are also now intending to produce transceivers at our facility in Vietnam. So Vietnam already produces a variety of the components used in our transceivers. We are now beginning to make transceivers in Vietnam, so that represents an expansion. So we have been growing assembly and test capacity. We are also growing, as you brought up, regarding telecom. For our DCI and telecom products, we are likewise swiftly growing capacity for those too. So yes, I would say, truly across the board, we are increasing capacity as fast as we can. I feel that is sort of my primary task at present, increasing capacity. And so, yes, because of the robust demand we are observing, that is certainly a priority throughout the company and across numerous product lines; and then I think you also asked regarding outsourcing. Yes, we are quite open to outsourcing, and we do utilize several different partners for outsourcing. And the way we always think about it is, if making something gives us a technical, like a technology advantage that our customers value, or if it gives us a cost structure advantage, then we will keep it in-house. But if it gives neither of those two advantages, then yes, we will seek to outsource. There are several areas where we have historically outsourced and things we are considering going forward. What we keep insourced is things that are technically advantageous to our products and provide a cost structure advantage. You know, a clear example of that is six-inch indium phosphide, where we are the world's only maker of six-inch indium phosphide. So yes, we are definitely open to outsourcing, and we will keep looking for opportunities to take advantage of outsourcing.
Great. Thank you so much. I appreciate that.
Thank you, George.
Yeah, thank you. Jim, I appreciate the additional information regarding how large the growth will be as we move toward 2027. However, might you address the investments being made at present in order to fuel that growth, and whether OpEx increases might come in at around 50% of the rate of sales growth? My reason for asking is that back in March, based on the sales material and processing business, I would have expected somewhat weaker growth and greater steadiness in OpEx. So it would be useful if you could connect those points as well. And I have one more question, please.
Yeah, perhaps I'll have Sherri address the OpEx growth, though maybe just a brief introductory remark regarding OpEx. From an R&D perspective, perhaps, our philosophy is that, you know, we hold a substantial number of businesses with enormous growth potential in front of them, and we aim to ensure we are fully capturing that opportunity. Consequently, if R&D is needed by those businesses, we will absolutely expand the R&D in order to fully capture the opportunity. I believe, you know, and we will absolutely expand, you know, in line with revenue, perhaps slightly below revenue. Yet I believe the major chance to generate operational leverage lies within SG&A. And with that said, perhaps I'll pass it over to Sherri, who can maybe offer a few further remarks on this.
Of course, happy to address that, Karl. Looking at things through an OpEx lens, specifically where R&D is concerned, like Jim mentioned, the idea is to put money into things that fuel the company's growth over the long haul. If you examine how our R&D spending has grown compared with a year ago, the increase comes to 16%. So we are, without question, putting money into R&D, and those efforts are concentrated quite heavily in the data center and communications portions of our business, since that's where growth over the long term is showing up. That matters a great deal. On the other hand, when it comes to SG&A, the goal we shared at our investor day was for SG&A to equal 8% of revenue. We still, as you know, have some distance to cover on that. Improvement has definitely happened. The headway we've achieved makes me genuinely happy; both sequentially and compared with a year ago, we have, you know, brought down the share of revenue, and we're pushing toward that goal. Then, to round out the picture on the R&D side, the objective we set at our Investor Day was 10% of revenue. So, as you know, our attention is on putting that money to work. I believe it simply comes down to, you know, the pace at which you're able to spend, since the dedication is clearly present, and we want to be certain those investments get made. So the investments we've completed so far leave me pleased, and that's how we'll keep approaching this, correct? Putting money into R&D while simultaneously seeking greater efficiency and more leverage from SG&A; that's roughly how you can view it moving forward.
That's really useful. Now for my second question: over at SPIE, you unveiled a number of fresh offerings throughout your industrial lineup, and you mentioned that orders are getting better right now in Semicap. Outside of Semicap, are you actually observing a clear rebound throughout the rest of your industrial operations, or can we not yet say that with certainty? Thanks.
Yeah, that's a fair question. When it comes to the wider industrial space, I'd probably say it's still too soon to declare an across-the-board industrial upturn, though without a doubt Semicap is picking up quite strongly. We had robust orders during the previous quarter — that's our December quarter. And we anticipate those orders will begin driving quarter-over-quarter revenue gains for us during our June quarter, and continuing through this calendar year's second half too. Semicap represents a major segment for us, so stronger order growth in that area matters a great deal to us.
Thank you.
Thanks.
Great. Thanks. I'd like to ask about the communications segment. You called out Multi-Rail, which I take to be something that would be fueled by a few of those scale-across densification efforts. Jim, what's your thinking on the timing, and on your content, for these Multi-Rail density upgrades on long-haul fiber?
Yeah, I appreciate the question, Ryan. So to begin with, this new Multi-Rail product is something we're very excited about. It gives service providers and network operators a really strong capability to upgrade, you know, inside the footprint they already have and to move essentially far more traffic across optical infrastructure that's already in place. So we're quite happy with this product. In our view it stands out clearly in the market, and we'd anticipate the ramp getting underway toward the end of the back half of this year. We're seeing very solid design wins and orders coming in for this product, and revenue contribution would begin in the back half of this year; and then, more broadly speaking, you know, that DCI piece of our business, and even just traditional telecom, has shown really strong growth. You know, in the last quarter, we had 9% growth sequentially, but it came in at 44% growth year-over-year. We anticipate that communications segment being up sequentially in the March quarter and the June quarter, purely on the basis of the robust demand that we're seeing. And here, once again, is another area where backlog has been building. And we sell at, several distinct levels within that portion of the market. We sell at the system level, as we just discussed. We also sell at the module level with ZR, ZR+, coherent transceivers, and then we'll sell, components too; so things such as, pump lasers and other products of that kind; and demand has been strong across every one of those product categories.
Thanks. As a quick follow-up, Jim, could we spend a moment on the 3D sensing space and the move toward multi-junction? In terms of that portion of the business, how do you view that shift?
Sure. On 3D sensing, I'll restate our prior comments: we secured a sizable new deal with Apple, which they made public under their American manufacturing initiative last summer. Money from this fresh arrangement with Apple begins flowing during the back half of this calendar year. It's a wonderful multi-year alliance, and we couldn't be more pleased. This is yet one more illustration of a top-tier customer making use of our American production capacity in Sherman, Texas. For that particular line of business, it involves six-inch gallium arsenide that has been produced in Sherman, Texas, for a long stretch, so that's six-inch gallium arsenide pixel technology, and yes, a major new alliance. We're quite excited about it. Revenue ought to begin arriving in the back half of this calendar year.
That's really helpful, thank you.
Operator, I believe there's room for perhaps one additional question, operator?
Hello, I'm Michael Mani, sitting in for Vivek Arya. We really appreciate you fielding our questions. First off, I'd like to get a sense of how much gross margin leverage that six-inch indium phosphide ramp is currently generating for you. Then, looking ahead across the coming couple of quarters, what sort of gross margin gain should we expect as you manage to double supply compared to a year ago? And on a broader note, when you consider that 42% longer-term gross margin objective, where are you now? What are the main things that get you there? Thank you.
Sure, perhaps I'll take the first portion regarding indium phosphide, and Sherri can handle the second portion, which is more about the wider gross margin drivers. That said, I'd note that during this quarter we're beginning to observe the advantages of six-inch production, since, as you'll recall, six-inch production kicked off in the September quarter. And typically it takes about six months from when wafer production begins until products are placed into a transceiver and then actually delivered to customers. So a modest amount of benefit will show up this quarter, though that benefit will begin accumulating across the quarters ahead. And if you jump ahead, say, to the close of this year, when half of our internal capacity runs on six-inch, you can roughly view it this way: that half of our internal six-inch capacity costs approximately half as much as the remaining half, correct? The reason is that with six-inch, the product cost comes to about half of three-inch; so that's a rough method of thinking about the cost advantage; and Sherri, would you like to discuss some additional general gross margin drivers?
Yes, of course. Michael, if you think about what lies ahead for our gross margin — whether we're talking about 39.5%, the midpoint of the guidance we gave for Q3, or certainly the longer-term target in our model of more than 42% — the main things driving that will be, well, definitely reductions in cost, and that's a big category, covering product and input costs, a few of which I mentioned before; and we definitely benefited in the quarter from lower product and input costs in our data center and communications business. But that category also covers yield improvements that we keep pursuing, and every quarter we're realizing gains from those yield improvements, and it makes me genuinely excited to keep seeing that. There will always be room for more there, so we'll continue pushing on that, along with the lower costs on product inputs. Then another piece is optimizing pricing, as we keep capturing the value of our products; and we've kept seeing quarter-over-quarter gains in how much pricing optimization we achieve, so that's very encouraging too. As for when these programs land, well, it's going to vary. Certain ones will come sooner, others will take longer, depending on which initiatives we're talking about. So how big the benefit is in a given quarter will, you know, probably move around, simply given how these projects are. But volume will certainly be another source of benefit too. As we ship more units, that helps us as well; and then there's mix — mix can always create headwinds in any given quarter, so those are the ups and downs inside gross margin, Michael.
Excellent. Thanks a lot. That's really useful. And I've got one more quick question. Now that the 1.6 ramp is starting, I get that EML and CW lasers are primarily driving things at this point, but out of those 2, are you expecting a meaningful change in the silicon photonics versus EML split for 1.6T? Particularly as you look ahead over the coming year, with CPO apparently becoming a larger opportunity, does that cause you to reconsider how much CW laser capacity you'd require, recognizing that there's ample flexibility to handle both, but I'm just wondering about that change. Thanks.
Yeah, regarding the first portion, EML against silicon photonics, given that we offer both products and are ramping both of them, the mix really comes down to what the customer wants, and it simply depends on the application. So we just produce whichever version the customer application calls for; and financially, there isn't much difference to us between those 2. And we think we, you know, we're just, we're in a very strong competitive position on both a 1.6T transceiver built on EML and silicon photonics. Then for the second portion of the question, you know, we're definitely ramping indium phosphide capacity for the transceiver demand we're seeing, but beyond that, we're also ramping capacity to serve the high-power CW laser demand that lies ahead of us too.
Great. Thank you. Thanks, operator.
All right. I appreciate all of you being here on this call. We are definitely headed toward yet another remarkable year, with increases in both revenue and profit, for fiscal 2026, and we sit in a very strong position to make fiscal 2027 even better, thanks to the phenomenal demand coming our way and how quickly our manufacturing capacity keeps growing. I want, one more time, to express my gratitude to every one of my Coherent teammates for their tremendous effort and commitment. Operator, that brings us to the end of the call today.
You may disconnect your lines at this time. Thank you for your participation.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Coherent Corp. transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Coherent Corp. earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.