Escorts Kubota Limited (ESCORTS) Earnings Call Transcript
November 4, 2025
Earnings Call Speaker Segments
Good day, ladies and gentlemen, and welcome to Escorts Kubota Limited's Q2FY2026 earnings conference call, brought to you by Kotak Securities Limited. Just a reminder that every participant line is in listen-only mode, and once the presentation wraps up, you'll have a chance to ask questions. If you need help at any point during this call, please signal an operator by pressing star and then zero on your touch-tone phone. Kindly be aware that this conference is being recorded. I'll now turn things over to Mr. Richey Bora of Kotak Securities Limited. Thank you, and the floor is yours, Mr. Richey.
Thanks, Asha. Good evening. I'm welcoming all of you on behalf of Kotak Securities Limited to the Escorts Kubota Q2 and H1FY2026 earnings conference call. I'd also like to take this chance to welcome the management team from Escorts Kubota Limited. Joining us today are Mr. Bharat Madan, Whole Time Director and Chief Financial Officer; Mr. Neeraj Mehra, Chief Officer, Tractor Business Division; Mr. Sanjeev Bajaj, Chief Officer, Construction Equipment Business Division; Mr. Sanjeev Garg, Head Finance and CPMO; and Mr. Prateek Singhal, Investor Relations and ESG. The call will begin with brief opening remarks from the management, and Q&A will follow. Before we get started, I want to add that certain statements the company makes on today's call will be forward-looking in nature and are subject to risk as outlined in the annual report and investor releases of the company. I'll now hand things over to the management for their opening remarks. Thank you.
Thank you, Richey. Good evening, everyone, and thanks for being with us today. Here are a few highlights from the company's standalone financial performance for the quarter that ended in September 2025. Operating revenue from continuing operations came in at INR 2,777.4 crore, which is a year-on-year increase of 22.6%. EBITDA stood at INR 363.2 crore, rising 56% compared with a year earlier. Our EBITDA margin for Q2 was 13.1%, an improvement of 280 basis points year-on-year. PBT from continuing operations was INR 431.1 crore, up 55.2% year-on-year. Net profit, or PAT, from continuing operations reached INR 321.2 crore, a year-on-year gain of 6.1%. Do note that the same quarter in the prior fiscal carried a one-time tax impact of INR 91 crore, stemming from changes to the long-term capital gain tax provision as well as the effect of brought forward losses relating to merged companies. Once you adjust for that, normalized profit rose 51.7% year-on-year. EPS came in at INR 29.19, versus INR 29.71 a year ago. Turning to the consolidated basis, the company's financial performance for the quarter ended September 2025 is as follows. Revenue from continuing operations was INR 2,791.6 crore, up 22.6% year-on-year. EBITDA was INR 359.7 crore, with a margin of 12.9%, an increase of 279 basis points year-on-year. Net profit from continuing operations totaled INR 318.1 crore, and after adjusting for the INR 91 crore impact, normalized profit grew 52.1% year-on-year.
Now turning to how each segment performed, in tractors for Q2FY2026 the total industry figure combining domestic and export came to 300,000 units, a 28% rise versus the same quarter a year ago. Our overall tractor volume reached 33,877 units, which is 30.3% higher than 25,995 tractors in the equivalent quarter last year, giving us a 20% gain in basis market share. By the close of Q2FY2026, total share works out to 11.28%. Within India, the tractor industry in Q2FY2026 totaled 275,000 units, 30.7% above the equivalent quarter a year earlier, helped by festive season readiness, ongoing government backing, a reduction in the GST rate, and favorable agricultural conditions, including sufficient reservoir water levels. Domestically, our sales came to 32,329 tractors, 30.5% higher than 24,768 tractors in the equivalent quarter last year. We grew in step with the industry, and that expansion was aided by new product launches along with a variety of customer-focused initiatives. Going forward in FY2026, we anticipate the tractor industry will keep up its growth trajectory, posting a low double-digit growth rate across the full fiscal year, driven by healthy reservoir water levels and separately strong crop yields, higher minimum support prices, and better terms of trade.
Now for exports—the tractor industry shipped 25,600 units in Q2FY2026, a gain of 4.4% over the 24,500 tractors recorded in the same quarter a year earlier. Turning to our own export volume, we moved 1,548 tractors, which works out to 26.2% growth versus 1,227 tractors in the comparable quarter. Sales made through the Kubota Global Network represented roughly 52% of our total exports during this quarter. Non-tractor revenue—made up of the agri-solution business, engine business, and the service and spare part business—accounted for 17% of agri-machinery segment revenue in Q2FY2026, compared with 18% in both the corresponding quarter and the sequential quarter. Revenue for the agri-machinery product segment stood at INR 2,432.9 crore, a rise of 29.1% from INR 1,884.2 crore in the corresponding quarter. EBITDA margin in the agri-machinery business improved by 368 basis points to 12.8%, versus 9.1% in the corresponding quarter. That margin expansion was helped along by softer material costs, improved operating leverage, and cost control measures. Moving to the construction equipment business, served industry volume in Q2FY2026—covering cranes, backhoe loaders, mini-excavators, and compactors—fell by about 4% relative to the same quarter last year. The decline came mainly from the crane segment, which dropped roughly 13% year-on-year. Total volume in our CE business was 1,146 machines, against 1,394 machines in the corresponding quarter.
Our mini-excavator kept building momentum, picking up 151 basis points of share, which puts it at 18.5% now. Revenue for the construction equipment segment was INR 338.1 crore, compared with INR 379.9 crore in the same quarter last year. EBITDA margin for the quarter that ended September 25 stood at 3.8%, versus 9.3% in the corresponding quarter, with the main reason being lower production than a year ago, when we built inventory to support the move to the higher emission norms. Right now the construction equipment industry has been working through a difficult environment, largely because of the extended monsoon season and infrastructure projects on the ground being mobilized more slowly than expected. That said, the industry should recover over the rest of this fiscal year, since the government remains committed to infra investment and new projects are being started across the nation. We expect industry momentum to build gradually, and we intend to be ready to capture that opportunity. At this point, I'll ask the moderator to open the floor for Q&A.
Thanks a lot. At this point we'll open things up for questions. If you'd like to ask one, just press star and one on your touch-tone phone. Should you want to drop out of the queue, press star and two. We ask that participants use their handsets when posing a question. Ladies and gentlemen, we'll pause briefly while the queue builds up. Our first question comes from Gunjan Prithyani at Bank of America. Go ahead, please.
Hi there, and thanks for letting me ask. My first question is about the industry — if you could give us a bit more detail on what sentiment looks like on the ground. There's obviously been an increase in the growth guidance, right, moving from mid-single digit up to low double digit now. So a little more detail would help on what we're seeing by region, what we're seeing when it comes to HPYs, and how sustainable this is as we go through the rest of the year.
Yes. Hello, Gunjan, and good evening. Neeraj Mehra speaking here. So, as Prateek already said, indeed, we are seeing an upturn in the industry, and we expect this year to close with double-digit growth — a slight increase in the double digits. Yes, after the GST reforms came in, where 7% GST was cut, we've witnessed a lot of buoyancy in the market. That buoyancy came mainly because of favorable rainfall and other positive macroeconomic factors. With tractor prices coming down, this buoyancy has in fact picked up further, which should help the industry expand more over the coming six months. When it comes to the regional picture, the industry is in fact expanding considerably in the southern region and the western region of the country mainly. It has posted a bit of growth in the northern region. The north was more or less stagnant before September, but it has now begun to display some positive movement. On the whole, there is growth throughout the country, but the biggest movement in Q2 originated from the southern region as well as the western region. On the HP side that you asked about, what has in fact happened?
It's still early days, in a sense, but after those revised GST slab rates came in, we've observed a change in that segment where customers are actually shifting toward tractors with a bit more horsepower. When I say higher horsepower tractors, the pull now is toward the 50 HP or 55 HP or 45 HP range. Because at the price of a 38, 40 HP tractor, he can actually buy a higher HP tractor. A slightly higher HP tractor is sort of a multi-utility tractor, where he can use it across all applications, agri and otherwise. I hope I've covered every aspect of your question, Gunjan.
Okay, that's quite useful. As a quick follow-up regarding your market share: obviously, there's been a degree of stabilization over the recent months, though against a backdrop where South and West keep performing fairly well, it will essentially come down to your product actions to help win back that share. So any initial thoughts on the product interventions we've been making across the last six months, how have the new products been received, and how should we think about market share from here, given that it will still be more a case of South and West delivering higher growth?
Alright, I'll take a couple of minutes to walk through this. So, we have three brands: Farmtrac, Powertrac, and Kubota. On Farmtrac, things are going quite well. After we launched the new series in January — the Pro Max series — market share has been climbing. No matter which region you look at, Farmtrac's market share is rising. During the last call, I mentioned that we'd be bringing in certain new products — not a whole series, just certain new products — under Kubota, and those came out in early August. It's still early days, but the initial impact has actually been good. That's what I have to say on the product interventions. On the Powertrac side, we had planned to launch a series in the latter half of this quarter, but for certain reasons, it's been pushed to the first half of quarter four. Once that series is in play — and that series is mainly from the southern market perspective — we'll see a definite positive turnaround on the Powertrac side. Yes, industry growth — substantial industry growth in the western part and south — is actually affecting us, but you'd have seen that in the last quarter, we've been able, to a very large extent, to arrest this market share.
Broadly speaking, our market share hasn't increased, yet we managed to halt the steady erosion during quarter two, and we're optimistic that moving ahead with Kubota and Farmtrac, we'll witness continued positive momentum. The new lineup arriving under Powertrac will require some time, but yes, we will see positives on the Powertrac side as well.
Understood, that helps a lot. Just quickly on the P&L side — treasury income declined this quarter. I imagine the railways funds would also have fed into the reasons behind that drop in treasury income, and what kind of yield should we be looking for going forward? That's my final question.
Hi Gunjan. So, Gunjan, treasury income comes from a combination of things: first, the surplus funds; and second, the way you account for the various products you've put money into. As you're aware, a portion of that portfolio sits in an open-ended fund — a mutual fund — and that's exposed to mark-to-market. Looking at quarter one, yields across the board had eased, which produced gains in the market. The mark-to-market movement went in a favorable direction. But in quarter two, there's been a bit of hardening relative to quarter one. That's where you're seeing the mark-to-market hit show up. Strip out that mark-to-market movement, and we're on the usual path. On an H1 basis overall, if you look, there's an improvement. The effect of the R&D money was also present in Q1, for two months, beginning in May.
Alright, I understand. Thanks a lot.
Thank you.
Thanks a lot. Anyone who’d like to ask a question can press star and one right now. Our next question comes from Vijay Pandey at Nuvama. Please go ahead.
Hello, sir. Thanks for taking my questions. I'd like to ask about the construction equipment industry. How are you viewing a possible recovery in that sector, particularly in the excavator business and the P&C business?
Okay. Good evening, Mr. Pandey. Sanjeev, as I mentioned a moment ago. We see quarter two as the first indication of recovery, since quarter one was genuinely weak. In quarter two, the industry has slowed less, the sluggishness has eased. Our expectation is that around the middle of quarter three, the trend should begin to reverse. A few developments occurred in quarter two. First, naturally, the monsoon ran longer. Also, with the industry shifting from BS4 to BS5, customers face a price increase, and that too met resistance from the industry. Demand has not been strong enough. Projects are mobilizing slowly owing to the monsoons, and demand has not been high enough to offset the effect of pricing on the product. On the whole, the industry went through a difficult stretch in quarter two. We think the government's recent announcements of new projects, particularly in states such as Andhra Pradesh, Bihar, Maharashtra, Gujarat, and various other projects that are non-mobilized are also beginning to mobilize. We expect demand to improve, and that should serve as a major leveler going forward, particularly in the latter part of quarter three and later in quarter four.
Looking at it year over year, our expectation is that the industry will come in below last year, though the decline should be in the single digits. Even so, that comparison is against a very high base relative to where things stood a couple of years back. We don't see any cause for worry; it's just that, given the current situation, it appears there will be a modest dip relative to the full-year industry figure from last year.
I believe there was news that the government’s construction equipment side will be introducing an incentive program for the tea industry. Could you update us on that, and how do you see it likely coming in April? How do we see the benefit for the company and the industry?
Look, those first rounds of talks have taken place. The government is leaning toward implementing PLI schemes aimed at production within the country. Those conversations remain at a very early stage, and no conclusion has been reached so far. ICMA, our construction equipment manufacturers association, stays in regular contact with the Ministry of Heavy Industries. Right now, there is nothing we can state conclusively. The government definitely has the intent for domestic production, and it will keep promoting localization of products as well as components. Not as of today. That clarity won't be available as of today. I think over the next few quarters, we'll see what comes out of those discussions.
Alright, thanks.
Thanks a lot. Our next question comes from Mumuksh Mandlesha at Anand Rathi Institutional Equities. Go right ahead. Mr. Mumuksh, the floor is yours.
Hello. Are you able to hear me? My apologies. My line was muted.
Yes, sir. We can hear you now.
Yeah. Thank you very much, sir, for giving me the chance. I'd just like to get a sense of this: over the medium term, GST has brought tractor prices down. I just want to understand how affordability factors in here, and whether that can genuinely lift demand across the longer medium term. Also, since the price point is lower, will we see any upgrading toward higher segments, given that prices have fallen? And sir, because customers have experienced the benefit of lower prices, are you noticing any shift in discounting or the pricing trend for the company? Also, if you could add this, since steel prices have declined, do you see any benefit or margin ahead?
Thanks for that question. Yes, over the very near term we're seeing GST help us. When I responded to an earlier question, I did note that it's still quite early, but we've observed customers shifting toward a higher HP product. In India, higher HP essentially means a 50 HP product. We've seen a move in that direction. Essentially, on an INR 700,000 product, that's a straight INR 50,000 reduction. And for the smaller or marginal farmers, this is once again a chance for them to purchase a tractor. Because the smaller or marginal farmer now has an opportunity to buy a tractor with a smaller amount of margin money that he needs to bring in. Also, from a medium-term view, considering these two aspects, we believe GST will have a positive effect as we move forward. On the discounts, discounts are always present during the season. Whenever it's peak festive time, every manufacturer, us included, offers certain discounts to certain shops, and those get withdrawn once the season ends. That will hold true this time as well.
Regarding input costs, sir, is there anything you can share about where those are headed going forward?
When it comes to cost, in the quarter that just ended, there was clearly some inflation, and that is the reason the margin took a bit of a hit. In the quarter ahead, Q3, we will see the advantage of deflation in those prices. As for the amount at this point, we cannot say for certain, but it will have a favorable effect on margin in Q3.
Understood, sir. Last thing, sir, regarding the non-tractor revenue portion, what growth do you expect for that segment over the next 6 months to 12 months?
This quarter has also seen quite strong growth, actually. When you look at our agri solution business, it outpaced the tractor business over the last quarter as well. Just the remaining two segments, Indian and spare parts, stayed more or less flat across these six months. Looking ahead, clearly, should tractor growth decline from where it stands now — and that has been extremely steep — then the effect will start showing up. The non-tractor business will certainly do better over the coming six months. On the whole, I'd say the mix won't shift meaningfully. Roughly 17%-18% still comes from the non-tractor side. We see it possibly moving by 1% in either direction, but we don't anticipate any substantial change at that level. Tractors are growing too, which I believe is also having a bearing on that overall mix.
Understood, sir. I really appreciate the chance.
Much appreciated. Our following question comes from Rishi Vora at Kotak Securities Limited. Your line is open.
Yeah. Hi there. Hi. Thanks for giving me the chance to ask. My first question is just that I wanted to get a sense of where inventory levels would stand for us and for the industry after, let's say, the month of October.
Thanks, Rishi, for asking. When you mention inventory levels, are you referring to how they stood on 1st of October?
If you could share that around the end of October, basically, or whatever details you're able to provide.
By the close of October, what we're seeing in our business is inventory sitting at just under 3 weeks—just under 4 weeks.
Got it, got it. My next question concerns exports. We've witnessed robust expansion during the first half. Could you shed some light on what's fueling that growth, which markets are performing strongly, and looking ahead, where do you expect the tractor — the export market — to settle for us, plus any guidance you might share for the second half of FY2027? That would be helpful.
So Rishi, overall we'd guided to 25%+ growth on the export figure, given the lower base we had last year. On exports in the first six months, we've done better so far. Going forward as well, I think those numbers will keep looking better. The market where we're growing, especially, is Europe, where the supply is happening. The major supply goes to the European market only. We've also opened Mexico now. We have tractors that will start going there. Some parts dispatches have already happened in the first six months. Volume will start picking up as we go forward. I think in the midterm business plan, over the next few years, we have a lot of projects that are more export-focused from the R&D side, and we're working on those. Our idea is to capture as many markets as we can. That's one opportunity area we see remaining for us. The intent is to utilize the quarter network for export as well. We think that's one area that will continue to do well in the future for us too.
Got it. Regarding construction equipment specifically, I realize margins have dropped sharply, and that includes versus the prior quarter. Could you walk through what's taken place, at least where profitability is concerned, and how we ought to view this looking ahead?
Look, so one factor here — if you actually make the comparison — is the production side, which came in weak during this quarter, since the emission norm changes took place. We are still holding steady where volume is concerned. There was a bit of inventory last quarter that got cleared out. I think as we move ahead into the balance second half, we expect the numbers to begin trending upward now. Last year, clearly, isn't comparable, since we built up a substantial amount of inventory. That's the reason the margin improved as well. There's a correction that has been underway across the first six months now, particularly this year. Moving ahead, I think once your numbers begin rising and production volume is improving as well now, we expect we ought to return to a high single-digit margin level across the balance six months for the seed business. The last quarter was also hit by the inflationary impact, which again, with softening now underway, is a positive effect we'll see in the next quarter.
Got it. Just one final question — is there any news regarding the new plant? What's the status on the approvals and all of that? Could you give us any timeline?
There's a piece of land — I believe it's roughly 5% to 6% — that the government still has to acquire. They ran into some macro issues and litigation involving certain farmers, and the government has now won that case in its favor. They're in the process of finishing the acquisition. They've indicated they will wrap it up within a month, and after that they'll begin the formalities for transferring the land to EKL. So let's hope that once they finish this acquisition within a month, we then have to carry out our due diligence on title, and after that we'll kick off the formality for the land acquisition. Hopefully we can get everything completed within this fiscal. The bulk of the parcel has already been acquired by them. I think it's only around 190 acres. They're looking at about 8 acres to 10 acres that they still need to acquire. Everything else is finished. Because this parcel falls within the overall plot area, we don't want to move ahead until they confirm and complete the acquisition.
Got it. And for this year, what's the CapEx guidance going to be?
This year, out of normal capital we had completed INR 350 crore to INR 400 crore, and that will take place. In the first six months, we have spent proportionately in line so far. That number, we expect, will happen.
You'd expect the following year to come in above this one, wouldn't you?
Our standard CapEx is going to stay right around this level. The INR 300 to INR 400 crore band will keep being our ordinary CapEx. Greenfield spending, of course, will come on top of that whenever it happens. It will sit entirely outside this regular CapEx.
Got it. Thanks, and best of luck.
Thanks. Thanks.
Thanks so much. Anyone who’d like to ask a question can press star and one now. Once more: if you want to ask a question, press star and one at this time. Our next question comes from Vipul Agarwal at HSBC. Please go ahead.
Thank you, sir, for taking my question. Sir, you just spoke about the timeline for the plan. It appears that next year, the plans will be ready by the end of next year. Maybe I just want to understand, in a shared way, what is the revenue growth trajectory for the next five years? Like covering key milestones, what's coming from domestic, and how much will be coming from exports? Then parts supplies, maybe like a longer-term view, if you can give some idea about it. The key timeline, tentative timeline says which year we'll see the maximum growth. Yeah.
Look, the big jump in exports is going to arrive once that greenfield site is operational. That's going to take place around 2028, 2029. The reason being, if we finish buying the land this year, then next year we'll begin construction work at those sites. According to the initial project estimate, we'll be commissioning phase I of the added capacity for tractor manufacturing and for construction equipment manufacturing at that plant. Honestly, the capacity we currently have at the existing site stands at roughly 170,000 tractors, and that too gets balanced out and raised to 200,000. Given how demand looks over the coming three, four years, we don't see any capacity shortfall arising at the current location. The only thing is the timeline — there's lead time involved in getting that phase I facility set up. I think demand will also pick up by then. We can clearly shift the timeline a bit, by a year here or there, and can even pull it forward if needed. If not, then obviously we'll stick to the planned schedule.
Thanks. Thanks, sir. With this new capacity for exports, what quantum are we expecting right now? Maybe it's been about a year or so — any changes versus the earlier estimates? From the export side, what kind of growth can we expect from the new plant?
On the export side, I think the main thing to watch is what happens once we begin shipping into the U.S. market. As of today, nothing at all is going to the U.S. from us. The intent was that when the greenfield plant comes online, that's when we'd kick off export activity into the U.S. market. There's also an idea of moving some of the global models into India, with India serving as the sourcing base for those products. Essentially, they'd be built only in India, and we'd supply them from India to the world. That's a plan Kubota needs to come back on, and they're working on it as we speak. Kubota will present its midterm business plan at some point, I believe in February or March next year. Once they make that public, we'll then formalize our own version as well, and at that point we'll announce it to the public at large too.
Appreciate it. Thanks a lot. That was useful, sir.
Thanks a lot. We now have a question from Himanshu Singh of Baroda BNP Paribas Mutual Fund, calling in. Himanshu, the floor is yours.
Hi, sir. Thanks for giving me the chance to ask. Sir, I just want to get a clearer picture: our employee cost and other expenses, compared year over year, have more or less stayed flat or even come down. I'd like to understand the reason for that, and how you expect that trajectory to develop going forward?
Actually, compared with last year it has risen, and on a sequential-quarter basis too, since our increment cycle starts on 1 July. So in this quarter — July to September — we have felt that cost increase, roughly 8%-9% on the manpower side. In percentage terms it appears unchanged, but on a fixed-cost basis overall, it is higher. On other expenses, I think mostly only those that are variable in nature have moved. Beyond that, expenses have been kept in check, and we expect that trend to carry on. Obviously, a lot will hinge on how much we spend going forward on marketing and promotion efforts, and that in turn will hinge on the market situation. That is something that can genuinely affect your other expenses. That genuinely can rise. The company's focus right now is on sales growth and accelerating the top line. That genuinely can affect some of those expenses in the short term. As things stand, I think for this year we do not necessarily see a significant change.
Alright. Sir, could you break out how much of the other expense would be fixed expense?
Look, apart from selling expenses — those tend to be somewhat variable, since logistics, freight, forwarding, packing, warranty, and loyalty all sit within other expenses — I'd still say you could have roughly a 50-50 kind of split there. You can treat 50% as fixed, and the remainder would be variable in nature.
Alright. Alright, thank you, sir. Thanks a lot.
Much appreciated. Our following question comes from Raghunandan N.L. at Nuvama Research. You have the floor. Mr. Raghunandan, go right ahead.
Thank you, sir, for giving me the chance to speak. Great results — congratulations — and happy holidays. I have just one question. Regarding tractors under the Kubota brand, could you point to what's being done to boost sourcing locally? What portion is sourced locally at present, and how do you expect that proportion to rise in the coming year? And how much would that shift once the new plant is operational? Thank you, sir.
Regarding the Kubota tractors that we manufacture in India, the engine is really the sole major component brought in from abroad. And given that Kubota product volumes aren't especially large at present, I believe we sell just around 10,000 to 12,000 tractors in India that use a Kubota engine. At that kind of volume, making the engine locally isn't a workable choice for us, since the investment would be extremely heavy and wouldn't pay back over the short term. As we said, the plan is ultimately to shift to our own locally made engine, and we're exploring that possibility through product development that would be sold under the Kubota brand name using our platform, S-Car's platform. That product development is currently underway. Hopefully, within another two years' timeframe, we'll launch this full range, which will carry our own engine and be sold either under the Kubota brand name or co-branded with our brand. That should enhance the margin profile for the Kubota brand. Until then, I think it will stay under pressure overall, because apart from tractors, most of the other items in the Kubota brand are imported. The only thing we're doing at present is the transplanter, as a single product line that we're localizing in India.
At the moment, that product is being brought in from China. Localization of it is underway, and production should begin at some point next year, possibly for that item. Demand for our agri solution has been extremely robust this year, the harvester in particular. Over the past two months, I believe we've had record sales, and with zero inventory now, we've clearly sold out as a company. Looking ahead, demand remains quite strong given how the integrations are shaping up. Naturally, as volumes rise, the effort will be to localize components to the greatest extent possible, which would let us enhance those margins.
Understood, sir. Thanks so much for that.
Thanks a lot. Anyone who’d like to ask a question can press star and one right now. The next question comes from Preeti Joshi at Financial Security. Please go ahead.
Hi there. Thanks for the chance to ask something. To start off, do we have any plans to bring an electric tractor to market?
Apologies, Preeti — we’re unable to hear you. Could you speak up a bit?
Can everyone hear me at this point?
Yeah, no issue.
Alright, yeah, thanks a lot for the chance to ask. First thing I want to ask is whether we have any plans to bring out an EV tractor. And then the second one is, once the greenfield projects are expanded, what's our new capacity going to be?
Preeti, we had already been building an electric tractor, but we haven't brought it to the domestic market, since those tractors carry a very high cost — the battery pack alone, in particular, runs you as much as a diesel tractor does. In India, we don't see it as a genuinely good market, particularly when you look at what farmers can afford. We used to export those tractors to Europe and the U.S., but we've now halted that, because in the U.S. the subsidies for electric vehicles have also been pulled. There too, you're seeing demand decline. Over the short term, we don't foresee any significant shift in strategy unless battery costs in India actually fall considerably. Charging infrastructure in rural areas needs to be built up, and at present it isn't there. Then there's the power side — you need it to run those tractors and the implements. Moving ahead with the larger tractor doesn't appear to be a workable option right now. We'll have to wait and watch and see. Perhaps there are alternative fuel technologies that companies are developing. For India, those might turn out to be better choices than electric tractors.
Thanks. Once those greenfield projects are finished, what will our capacity — our expanded capacity — be at that point?
You brought up that our current capacity stands at roughly 170,000 tractors, and with some balancing at the existing site we can take that up to 200,000. As for the greenfield, in phase I we're looking at putting in place capacity for 100,000 tractors during the first phase. A second phase could then come along with another similar capacity. I think that overall, we're pretty much doubling the capacity from the level we have today.
Alright. Thanks a lot. I really appreciate it.
Much appreciated. Our following question comes from Priya Ranjan at HSBC AMC, on the line. Kindly proceed.
Thank you, team. Just a couple of things. First, on finance penetration — I mean, you've launched the captive finance. How is that working out? That was one of the aspects of, say, market share gains. Where do we stand and how do we want to make progress on that? Second, on the agri solution, I mean, the harvester, how much have we localized? What is the — because you're seeing a lot of demand, etc., from the harvester side. That is a high-value item. What's the progress on localization, etc., on that side? That's part one. I mean, let's talk about that first, then we'll move to the other ones.
Starting with the captive finance company — I believe operations began at the end of November last year. At present, we're active in just four or five states, and even there only with a limited number of dealers. This year is more of a settling-down phase, as we settle in on the IT systems, which have now been developed and are working. The portfolio will be small this year. Yes, we did well during this season as well. Last month, I think, was also a record number for them, even though volumes are very small as of now. They're looking at expanding pan-India next year. Next year, we expect the company should be able to achieve break-even in profitability prior to the risk cost. In the year after, we expect the company should be in profit. Penetration for captive is very low right now. As I said, since we've only started in a few states, we aren't even a pan-India player right now. The idea is that captive finance typically has a penetration of anywhere between 25%-35%. That's where most of the manufacturers have been working.
We also aim to reach a comparable penetration level through our own captive finance company within the next three to four years. Turning now to your second question about harvesters: at present, we import harvesters from Japan and Thailand. Certain parts and components are ones we plan to produce in India, and those will be exported from India to Thailand and Japan, where those facilities will use them in manufacturing and then supply the finished product back to us. That is one line we are starting this month at our existing facility — specifically for the hydraulic lift and transmission axles, which will be made in India. Step by step, we will shift toward the high-value items. The aim is to localize. We will be working on some options and exploring some contract manufacturers in India who can collaborate with us on our design so that we can achieve the maximum localization. As you mentioned, it is a high-value item. It costs almost INR 20,000-INR 25,000, and that is the selling price. It is 4x-5x over what the tractor really sells at. Demand has been very strong. Obviously, localization would make sense for us there.
Is there any sort of plan — I mean, this particular plan? Can localization happen at whatever volume you're considering at the moment you decide you want to localize? Or do we have to wait until the new plan arrives? I mean, once the new land greenfield comes up, then we'll probably look into it.
If we take the third-party manufacturing route, there’s no need to hold off for the greenfield site. That’s the approach we intend to take. At present, the localization work we’ve completed sits within the existing facility. Space there is fixed, so our hands are largely tied in that location. For the harvester in the tract type, our average volume today runs somewhere between 2,800 and 3,000, and this year it may come in a bit above that. Those figures aren’t especially large in that respect. That contrasts with a country such as China, where the harvester market is quite robust, at 100,000 units plus. In India, tract type harvesters remain limited. We hold roughly 30%-odd market share in India. The plan is to shift toward the wheel type harvester, which is the biggest segment of India’s harvester market, and is also lower cost from the farmers’ standpoint. As things stand, we don’t have that manufacturing facility in India. What Kubota has isn’t simple to localize, since producing those products in India would be quite expensive. We’re examining some alternative options in India through which we can mix and match know-how from Kubota while also drawing on local facilities in India.
Talks are still underway. We're continuing to look at a few possibilities. Nothing has been made concrete or final at this point, though that's the direction we intend to take.
Sure. And regarding that — I mean, take the manpower question, and so on; it keeps coming up, even in agri. Although we’re a low-cost country — I mean, a low-cost manufacturing country — manpower in rural areas, farming, and so on is still a concern. I think Kubota also has an agri robot and agri — I think the drone system, and so on, where you can at least handle the pesticide — I mean, the spraying, and so on. Any thoughts on those product lines, where we can bring them in and this can mechanize farming and give better yield for the agriculture side in India? Any thoughts on that?
In India, I believe farm labor still remains far less expensive than what you observe. Japan faces entirely different problems, though it does have an aging population. People there may wish to work on farms, but they simply cannot. That is the reason they are moving toward autonomous machinery. Mechanization levels you will find in Japan are higher than what India will likely witness, at minimum over the coming decade or thereabouts. We do not believe so. Kubota has already created a concept machine that is fully autonomous and can genuinely perform work. It runs on a hydrogen fuel cell as well. Launching that in India, I think, remains a distant prospect. That is not, in my view, a workable option. As you pointed to in one of the earlier questions, take the electric tractor—despite being the first to develop one in India, we never brought it to market here, since productivity was a problem. Given the present wage structure for farm labor, we do not see it as a workable option at this moment. Perhaps later, if India truly experiences inflation in farm wages, that might be something that takes off dramatically. At present, we do not believe anything of that sort will occur in the short or medium term.
Yeah, when it comes to drones, there are plenty of businesses out there doing work in that space. That's what I'd say.
Right. Drones have another difference too, because, like I mentioned, when you spray by hand, there's also a health risk for the people doing the work. So it really makes sense to commit to that approach. With drones you get improved accuracy and improved coverage. In our situation, we already use sprayers for bigger crops at this point. We have a boom sprayer as well as orchard sprayers. There's a separate machine we've got that's already offered there in India. We're selling a few sprayers through our agri solution business too. That's also done by machine, so no manual labor is needed in that case. For a bigger field, going with drones makes sense, since in the small fields out there, your holding isn't very large. Even the smaller machines still make sense, and operating them costs much less. As of today, drones remain an expensive proposition.
The final question concerns exports. I mean, regarding the U.S. side, could we reach 25,000 to 30,000 over the next two to three years, depending on the product line, product planning, and so on?
Roughly 2 to 3 years, since shipments to the U.S. will begin once the greenfield facility becomes operational, which should happen around FY 2028 or FY 2029. From that point on, we expect our exports to receive a significant lift, because that is when U.S.-bound exports will kick off.
Absolutely. All right, I appreciate everyone joining us.
I appreciate that.
Thanks.
Thank you very much. Since no participants have any additional questions, I'd now like to pass the conference to Prateek Singhal for his closing remarks. Thank you.
We appreciate all of you, ladies and gentlemen, for joining us today. Should you have any comments or questions, please don’t hesitate to reach out to us at investor.relation@escorts-kubota.com. Many thanks, and enjoy your evening. Thank you.
I appreciate it very much. This brings the conference to a close on behalf of Kotak Securities Limited. We’re grateful that you joined us, and at this point you’re welcome to disconnect your lines. Thanks again.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Escorts Kubota Limited transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Escorts Kubota Limited earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.