Harsha Engineers International Limited (HARSHA) Earnings Call Transcript
February 5, 2026
Earnings Call Speaker Segments
Ladies and gentlemen, you've been joined to the Harsha Engineers International Limited conference call, which is about to start. Kindly remain on the line. Ladies and gentlemen, you've been joined to the Harsha Engineers International Limited conference call, which is about to start. Kindly remain on the line. Ladies and gentlemen, good day, and welcome to the Q3FY26 Harsha Engineers International Limited earnings conference call. As a reminder, every participant line will be in listen-only mode, and there will be a chance for you to ask questions once the presentation wraps up. If you require assistance at any point during the conference call, please signal an operator. We're pressing Star then zero on your dashboard phone. Please be aware that this conference has been recorded. I would now hand the conference over to Mr. Vishal Rangwala, CEO of Harsha Engineers International Limited. Thank you, and over to you, sir.
Good day, everyone. A very warm welcome to our Quarter 3 FY26 Investor Call. As we normally do, I'll invite Mr. Moulik Jasani, our CFO, to walk everyone through the numbers in more detail a bit later. That said, I'm guessing you've probably already had the chance to review them. Let me begin with the big picture. I'm genuinely pleased to see that at the macro level, a number of favorable developments have taken place, and these have clearly lifted the overall mood of the market. Among them: the India UK FTA, then FTAs with a few other nations, plus a very encouraging India EU FTA that was wrapped up just recently, and on top of all that, the much awaited India US Trade Agreement, again with some strong directional push on capex as well as long term tax holidays announced in certain key segments. With the last budget, all of us are fairly confident that India can hold a good GDP growth rate of around 7% over the coming years. As you would have noticed from our numbers right at the start. I'm glad to say that the quarter three FY26 performance is broadly in line with what we expected, aside from a slight blip in the form of below par performance in Romania. Our India engineering business, which comprises our company plus our wholly owned subsidiary Hersha Advantage, has kept up a strong showing on both the top line and the bottom line.
Even though Hersha Advantage, which brought its Greenfield facility online during this financial year, has posted losses at the PET level — mainly because of the impact of higher interest and depreciation. Also, as you've probably noticed, we had to book a one-time provision of roughly 5.97 crore in quarter three in India for additional gratuity and leave and encashment, to reflect the changes introduced by the new Labor Code that the Government made effective in the quarter. This is a one-time exceptional provision that had to be made retrospectively in quarter three. Our India engineering business has reported 17.4% revenue growth in Q3 on a YoY basis, and if we normalize the effect of the one-time exceptional provision, then our India engineering business operating EBITDA margin has shown a healthy 23.8%, though the reported EBITDA is at 21.7%. As mentioned earlier, this is after absorbing a net loss of rupees 3.7 crore in Harsha Advantech in quarter three. We expect a much stronger revenue performance in the Hersha Advantech subsidiary in quarter four, which should increase the data and reduce the Q4 loss in the Advantech subsidiary. Speaking of outsourcing of cages in our India engineering business, we are steadily growing in this segment owing to a combination of favorable factors.
When we look at cage demand in India, it's increasing as well, and we keep a dominant share of the market across many different kinds of customers. Also, we've begun supplying a number of our customers' new facilities in India, which serve various markets worldwide. Our exports out of India are steadily climbing too, with the EU still showing a recovery in industrial demand for cages, although wind demand in Europe has yet to pick up. My belief is that, with the favorable FTAs, demand ought to rise in Europe over the coming quarters. On that note, large size kgs have kept up a strong showing, posting sales of roughly 39 crore during the nine months to December 25, compared with 31 crore in the matching nine-month stretch of the prior year. The pace of new product development remains strong at about 123 SKU up to quarter three, or in quarter three alone, giving 382 SKUs for the nine months in the period ending December 25th. Then, looking at our other growth drivers, I'm pleased to report that the bronze bushing business has maintained its strong growth trajectory, hitting a sales revenue figure of approximately 92 crores in the nine months ending December 25.
Relative to what we projected before, this segment remains on course for roughly 30%+ growth on a YoY basis. On stampings, Q2 saw a blip from some seasonal effect in consumer goods, but things are picking up again in Q3, and revenue for the 9 months through December came to 41 crores overall. I anticipate stamping sales will rise further next quarter thanks to a few new stamp components now under development that should be commercialized in the next financial year. Finally, although sales growth with our Japanese customer is slow, the direction remains positive. We're confident that even though this is taking longer, there's been no dilution in our efforts or in the opportunity for meaningful market-share growth with our Japanese customers. On overseas subsidies, I'm pleased to say Hersha China has kept delivering consistent, steady results, which has maintained decent profitability and a growth strategy. In fact, you'd have seen in the disclosure we made to the stock exchanges that we've set up a brownfield expansion plan in China with an outlay of approximately US$9.94 million to expand Cage manufacturing capacity there, focused primarily on steel cages.
The thinking behind this expansion is that demand for steel cages is strong in China, mainly in the industrial segment. Our view is that we can substantially raise our market penetration in this segment in China by boosting our cage manufacturing capacity there as a local player — which matters not only for our existing key MMC customer that is present in China but also for local Chinese bearing manufacturers, who can be served if we have sufficient steel gauge capacity in China. We will fund this expansion mainly through not debt, and then up to maybe 70 to 80% — or rather, we will fund it by borrowing locally, and the balance will come from an equity contribution from Harsha India. This expansion will be carried out at our existing site as a brownfield expansion, and we intend to have it operational before the end of financial year 28. In this quarter we once again saw Romania's performance come under pressure, mainly because of a steep rise in copper prices globally that could not be passed on to the customer right away, as there is a lag. This has resulted in an operating loss at Romania, and the combined net loss of our foreign subsidiary stood at around 3.98 lakhs or 3.98 crore in quarter three, and for nine months it stood at 6.09 crore in nine months, or year to date.
Even so, we’re still confident that Romania will probably perform better in the coming quarter. That’s because of the consistent, deliberate shift and focus we’ve made on the finish cage business, along with customer diversification and the cost control strategies we have under implementation. On our Solar business: the Solar division posted a strong performance in quarter three, with top line revenue of around 59 crores and an EBITDA of around 9%. But as I said earlier, this is an order driven business, and overall performance in the current financial year will be — you know, it’s good and keeps contributing positively. This division continues to make a positive contribution to the overall business. Finally, I feel very confident that we’ll keep performing well in quarter four in this segment as well, and that we should be able to achieve the overall guidance given for financial year 2026. More importantly, we feel we’re on a good trajectory for the next financial year and hope to continue in this direction. That said, we’d prefer to give overall guidance for FY27 at the time of the quarter four FY26 annual result. Now I’ll hand over to Moulik, who will take us through the numbers in a little more detail.
Molik, I'll turn it over to you.
Thanks, Vishal Bhai, for the business overview. Good afternoon, everyone. As you'll have noticed, for the quarter that ended December 25, our engineering business at the consolidated level posted a top line of rupees 350 crore, versus a top line of 363 crore in the quarter right before and 302 crore in the same quarter a year ago. For the engineering segment, consolidated EBITDA came in at rupees 58.6 crore, compared with EBITDA of 63 crore reported last quarter and 48.2 crore in the prior quarter. However, adjusted EBITDA for this quarter stands at rupees 64.3 crore once we adjust for the one-time provision impact from the new labor code. Rising metal prices, particularly copper, along with a lag in passing through raw material costs, have weighed on our EBITDA margin and pat relative to last quarter, and also on our new greenfield sites. Baila at Baila has posted a net loss, as USAR noted, because of first-year operations, and we also capitalized the second building at our Baila sites. In the last quarter, both foreign subsidiaries together also contributed an EBITDA loss of roughly rupees 51 lakhs at the combined level of the two foreign subsidiaries.
On the solar side, as noted, revenue came in at 59.7 crore, with EBITDA of 5.5 crore. At the consolidated level, our overall working capital cycle stands at roughly 140 days, compared with 146 days in the prior quarter and 145 days in the same quarter a year ago. Capex incurred during the last quarter was rupees 32 crore, and cumulative capex over the past three quarters of the current financial year is approximately 100 crore. That covers this brief note on the financial numbers, and I'll now ask the operator to open the Q and A for the participants. Thank you.
Thank you so much. We'll now start the question-and-answer portion. Anyone who wants to pose a question can test our one on the touchdown telephone. Should you want to take yourself out of the question queue, you may press Star in two. We ask participants to use handsets when asking a question. Ladies and gentlemen, please wait a moment while the question queue assembles. Our first question comes from the line of Harshit Patel from Aquarius Securities. Please go ahead.
Thanks a lot for taking the question. First, on the India engineering business, this marked the second quarter in a row of really strong growth, and in that business we delivered growth ranging from the mid double digits to the high double digits. Could you point out what's driving that — which end-user industries in particular are behind this performance? And if you could also give us some sense of the mix between pricing and volume within the 17% growth we posted this quarter, that would be very helpful.
From our perspective, then, looking at it geographically, India is performing very well, and so is Europe, as I said earlier, and both are driving overall growth for us since they are very large segments. For us, this growth is mainly — what we're seeing is that it's purely quantity driven, and we're seeing volume growth as of yet; I think in the last quarter, Q3, we don't see any material impact or pass-through that has materialized, so that will happen in the current quarter. And overall we're seeing India, we're seeing strong demand across all segments, industrial as well as automotive, and overall globally we're seeing the industrial segment slowly improving, which had been in a negative cycle over the last year and a half. So it is recovering, that's how we look at it. And that's how we're seeing it. And for us, another positive is the wiring growth and stamping business growth, which are largely domestic focus. So that also supports India. India growing overall very well. So that is also supporting, just to.
I’ll add just one point quickly for this year: exports are growing too. So over the last couple of years, India was expanding at home, but exports were dragging us down somewhat. Now exports are also posting roughly 10% growth, and that is helping us show a much stronger growth figure in India.
Next, regarding the CapEx you mentioned for China: we've announced a capex figure of roughly $10 million. That's a fairly substantial amount at this point, considering that we're still running at about 55% capacity utilization in that market. So, do you believe demand will be quite strong in the near term, and that's the reason we're expanding? We're essentially trying to get ahead of the demand there. And if you could also give us some sense of when this capacity would be expanded — at that scale and plant size, what would be the maximum revenues we could achieve at the China level? Perhaps in FY29, since FY28 is when your expansion will be completed. So, at that scale, what kind of revenues and EBITDA margins are we aiming for — this is a slightly longer-term, broader question, but any outlook on that would be very helpful.
Right. So once more, where we stand: in China, several developments are underway. As I said earlier, we have substantial brass capacity situated locally in China. But for industrial steel cages, we currently have no local capacity, and we're working on that. The industrial segment is growing, and our capacity to take part and capture some business share shifts considerably once we're a local manufacturer there. So that is mainly what's driving this capacity expansion inside China. What we're doing is this — some brass capacity is also being expanded as part of this plan. Now, in this investment, a large portion — 40% plus — is infrastructure, which covers the building and a few basic infrastructure items we need to construct so we can actually house a lot of our dedicated capacity there. So that's a large portion of this investment. And then we're adding cage capacity, as I mentioned, mainly on the steel industrial side, where we see solid demand and growth and an opportunity to penetrate local markets. So that's the rationale; from a numbers standpoint, giving you a very precise figure would be very difficult.
That said, regarding the piece or the equipment we plan to install, we anticipate that at full maturity it should. It should deliver.
Right now, revenue from where we stand is going to be twice what India brings in. So we're expecting overall revenue in China to hit 2x once all of this capacity reaches full maturity. Now, that. That still leaves us with extra infrastructure available for expansion, since we're in the middle of a full infrastructure expansion at the moment. So, and we're sort of holding space open to accommodate any. Any growth opportunity that comes our way in a different segment and so on.
That’s great. Sir, I really appreciate your taking my question. I’ll return in between.
I appreciate that.
Thanks. Our next question comes from Amit at PL Capital. Please go ahead.
Hello sir, and thanks for giving me the chance to speak. Sir, my question returns once more to China. What's the thinking behind the rationale for expanding? So would it be that you're penetrating entirely local, this 2x sales that you're aiming to reach by F29 F30.
So it's a mix of our current customers and local ones. We see a chance to capture better market share by localizing, both within our existing customer base and because some customer access simply isn't available when we're, you know, supplying out of India. So we're sort of building that. So it's a blend of both local customers and our global MNC customers, growing the wallet share with them.
And just to add to that, Amit: in that particular industrial segment, there are certain areas — in China, there are only 1 or 2 local suppliers, and no major suppliers are available. So even the local bearing manufacturers need reliable, consistent suppliers as alternate suppliers. And that's where we have a great opportunity to capture even the local bearing manufacturing companies in the industrial segment of the steel areas.
Okay, but with a customer you already have, is there any chance you could use maybe 50 or 60% of what's being installed? Any rough estimate at all, or does that remain open?
The factor here is that there are definitely great dialogues. We don't have a clear commitment. However, we have a—we have—we have good engagement and discussion going on, and some portion of capacity will definitely go toward supporting our existing customer and a bigger wallet share of their demand.
Okay, so, given what we've learned from our past experience in China, how confident are we about margins? With this expansion, what margin level are we targeting? Looking back, we've encountered difficulties with our international subsidiaries in any case. Yeah.
Yes. So we definitely—we have confidence that with revenue at the right level, our existing EBITDA in China will improve. We're definitely working toward that. We see the potential for better margins here, and that's also one of the motivations for us, you know, to go there; there's also a need for scale at a level that will likewise help us generate operating leverage and improve our margin even on the existing portfolio as well. So.
Okay sir, back on this point — you mentioned somewhere in the commentary that demand isn’t picking up in Europe. So I’m wondering whether that carries any implications for Bushing’s business, like whether there might be some challenge there. Because I think you wrote that it’s going strong. But I’m just trying to understand what you mean by wind demand.
Yeah. So. Yeah. Yeah. So I think the focus of our Bushing business is on replacement-driven funds. So that’s why it keeps growing even though, you know, Europe wind isn’t performing as well as we expect. However, a significant portion of our Romania facility does support the wind market. So overall, the wind market in Europe isn’t doing that great. And that’s the reference I was kind of mentioning. So we don’t see that as correlated at a full conversion majority. The pushing business will follow the wind market. Whatever is going on in the wind market. But having said that, right now we’re in a very different phase when it comes to Bush, where the focus is on whatever existing wind application is converting into Bushing, and that will drive the bushing.
Okay, so finally, regarding Romania, you mentioned that commodity prices affected this quarter and that this will likely carry into 4Q. So what are we seeing at this point? Last time on Romania, I believe there was a bit of a rebound, and you pointed that out then. So given this challenge now, how does the outlook look for the coming one or two quarters in Romania?
So I think we won’t be able to say precisely how things are going. The commodity market is showing a lot of volatility. We do have a pass through mechanism, so there’s a quarter to quarter impact and correction. But — I mean, not knowing the future, but based on what we have seen — there’s significant volatility. So that remains a risk and a concern. That said, as I mentioned earlier, our improvement program is ongoing. We are improving the revenue and the product portfolio, doing more cages and so on, which is gaining traction. So apart from this specific challenge, I think if you look at the revenue side compared with last year, the similar quarter, we have grown and we have improved our product portfolio. We are not at all where we need to be. So we are continuing to work on that and evaluate the situation, engage with customer and see what’s the right path going forward on this.
Thank you, sir. Thanks a lot — really appreciate it.
Thanks.
Thanks. Our following question comes from Saket Kapoor of Kapoor and Company, who is on the line. Kindly proceed.
Namaste, sir. I hope you can hear me. Yes, thank you, sir. First, if you wouldn't mind repeating it — just for the sake of repetition — also on the guidance side, what is the likelihood that we exit fi.? That's my first question.
Saket mentioned that overall growth would be slightly above 10%. So Q4 ought to keep up that same run rate, perhaps with a small incremental gain. We'll see. That was the guidance, then. I think we're on track and should be fine. Regarding margins too, on the standalone business the reported margin will be better, and we're targeting, you know, the EBITDA range we discussed and reaching the PAT range, taking Q3's run rate and then improving Q4 a bit. We should see considerably stronger bottom line growth in FY26 than in FY25.
No sir, the EBITDA margin for the standalone business part is 23%, 23.4. That’s what we reported. So. So we’re confident about maintaining it.
No, no — look at what actually happens. A quarterly lag always exists between commodity prices and selling prices, and consistently we ought to land in the 20 to 23 range. Then there's a small effect from Advantech that will be somewhat lower than Q3 this year in terms of loss — the third loss — and it won't break even entirely. Starting next year, it should break even. Even so, turnover keeps rising steadily. Advantech may orbit Q4, as we'd say. There are quite a few moving pieces, but we should be getting to the targeted PAT level within the range of around 35 or so. Let's see.
Alright, could you provide the nine-month figures for sales and profitability separately for Romania, China, and Advantage? Just give us those numbers, and then, sir, regarding Romania — if I'm recalling this correctly, we were about to talk through and lay out the strategy or restructuring for that unit so that better deliverables could come from it. So where do we stand on that, sir?
Regarding the figures, we've already provided them in our investor presentation covering India engineering, business, and foreign subsidiaries performance. So you can look at our investor presentations, and there you'll find those numbers. And on the Romania situation, yes, our focus remains the same — on improving our cage proposals relative to our current casting proposal — and dialogue with the customer is already underway.
Sir, I was hoping you could break out the China business and the Romania business separately, and the advantage — could you give us all three of those numbers individually?
So as a matter of strategy, I’ll tell you that in the past we’ve always provided a combined figure at the foreign subsidiary level. So you’ll see the loss came to roughly 6 crores during the nine-month period. At the foreign subsidiary level, there could be a slight reduction in Q4 when it comes to the combined loss. But you may take a combined loss somewhere around 8 crores for the year end for the foreign subsidiaries. We’ve already given it as 370 lakhs in Q3; it should come down in Q4, but it will still be at a loss level. So I think we won’t be able to give the exact number. This is already given the way we’ve explained it. Actually.
There are a couple of small things you brought up in the presentation, and also earlier, regarding the lower offtake from your Japanese customer. So if you could just tell us where things stand on the deliverables and on order booking from that Japanese party. And then, sir, in the slide we mentioned the diversification into precision stamped and brushing components. So does this stamping also tie into the brushing part of the story, or.
We also perform stamping for additional tools, separately.
And yes, we're moving past bearing cages and bushings. We also provide stamping components to our customers, which span automotive as well as consumer goods and certain industrial goods, and so forth. And. So.
Yeah, stamping is quite a different thing. Yeah, it extends what we can do in manufacturing steel cages, which is a stamping process. But we've created some quite specialized components, such as railway seals or compressor parts, special kinds of compression stampings, and so on. That takes our technology skill set into a somewhat more diversified field. But we keep the same value addition in mind, you could say. So we aren't doing a me-too kind of situation. But bushing replaces bearings in the gearbox, the windmill gearbox. So it's a very different application.
All right, just to go over the sample parts — will those sit in the Advantage unit we're running, or are they in the older plants?
We already have that in place. Perhaps Advantage has added capacity for bushings and large-size cages.
All right. And finally, sir, one last thing—could you share your message for your investors? We listed in 2022, so Covid's impact on valuation had us frightened. Yet even accounting for market levels, the business climate, geopolitical matters, every dimension—shareholders have seen no value creation, and that includes the promoters holding three fourths of the equity. So we've observed, on the deliverable side, what more is there, and how soon would that convert into value creation for us through consistent, profitable, predictable growth for the organization? So if you, sir, could offer some insight on that.
What you've noticed is accurate. At the same time, keep in mind that factors at the macro level are outside anyone's control at any given moment. We've been quite open with shareholders and investors about where things stand, given that 35% of my business comes from Europe globally, Europe is declining, and then there are geopolitical tensions on top of all this. I think we've performed well by promptly returning to the drawing board, reworking our strategies, and working to grow while sustaining reasonable growth. I don't want to say much more, but it appears this year was considerably better than last year, and next year should be better still. Our responsibility is to be candid about the present situation, our strategy, and how we intend to keep the company on a growth trajectory. The market is something nobody can predict and we can't control — that's all. And we'll communicate extensively about what. Being always transparent is what we feel is right.
Understood, sir — I've gotten into the queue. Yes, indeed, I'm getting in line. My turn now. Thanks.
Thanks. Thanks a lot. Our next question comes from Manish Koel, who is calling on behalf of think wise wealth managers. Manish, you have the floor.
Thanks a lot, and congratulations on the very strong setup figures, sir. So I have a couple of questions. First, could you provide the revenue breakdown for your new businesses — Bronze bushing stamping, bath size, and Japan-based customers — for the nine months of the current year, along with the comparable figures from last year?
Yeah, I believe Vishal already addressed that in his remarks, Amani. So let me go over it again for you. That way it's easy to refer to.
Yes.
For the last nine months, size cages came in at about 39 crore, compared with roughly 31 crore in the same nine months a year earlier. Japanese customers account for approximately 51.5 crore, or 50, against about 50 crore last year. So stamping was almost flat: we posted around 39 crore this year versus 41.2 crore, while busing stood at about 74 to 75 crore last year against 92 crore this year for the nine months.
Alright, so the related question is this: roughly, if I run the numbers, those three or four categories together account for 21% of your revenue. So how should we think about that moving forward over the next two years and three years, or maybe what sort of visibility do we have — could this business potentially grow within two years? That was the first question, and the second one is about the cages business: on a standalone basis, how do we see the growth rate in the kgsp?
I don't have an exact double-up figure to give you like that. But these are the growth drivers we're focused on, where we see solid opportunity — that's why we keep citing the numbers, and sometimes we don't perform as well as we'd expect. That said, we do expect very good growth across all these segments. It can happen that one segment stumbles for a while or something along those lines. But you know, across all these segments we've signed a lot of new supply agreements with our customers, and we feel they're on a good growth trajectory, and realization will come soon. And on the cage side, we see very strong growth continuing for that product. What we offer customers in terms of cages is basically a very unique proposition. And we're fairly confident that what we bring to the table will deliver that additional growth for us. We're also seeing that this is driven by existing business that was supplied into Europe or the US or other locations. How those agents are doing. However, in India it's doing very well, it continues to grow, and overall we feel fairly confident about the cage business as well.
To add some context, large-size cage is really a subset within our cage outsourcing — the straightforward reason being that it was separated out since it represented a fairly low wallet share five years ago, merely half a percent, 1%. At present, we're aiming for it at maybe at least 5 to 7%, and that's one area growing quite nicely. So it's very much part of outsourcing. And I think, overall, all these Japanese customers tell us our wallet share with them stood at 1 or 2%. We're targeting at least 5 to 10% over the next two, three years. So, you know, these fall inside the larger subset of outsourcing. They're carved-out subsets with a specific focus.
Sure. You mentioned that new product development is picking up speed. So I'd like to get a sense of whether we're gaining market share with your customers, and on resourcing — as you said, you've begun supplying to customers and there are new facilities in India. How should we view this — is it fair to expect that next year we could see double digit growth for the company overall?
For us, a product that's in development or under development serves as an early signal. What that means is the customer keeps handing us product that we're going to develop. Turning such a product into commercial reality could take anywhere from six months to two to three years, and it hinges on how the customer is approaching things. Sometimes a customer will decide that commercialization will only begin once you've finished the entire portfolio, and so on. So really, we point to that as a kind of indicator that our pipeline is strong, and that's where things stand now. As for doubling the growth, I think it comes down to a variety of factors. It depends on how the industry is performing as well as how new projects come online. We're very hopeful and confident that good revenue growth sits in the pipeline. But it hinges on all those factors. So it's hard to put an exact number on all of that.
For the coming year, our aim is growth in the double digits. Right. So, as I mentioned, that's certainly the objective. However, we'd like to provide somewhat more specific guidance, informed by certain recent developments. We'll follow up with you once Q4 concludes.
Alright. And sir, specifically regarding margins such as India, the standalone engineering margins — what we've observed for the engineering business at roughly 25% this quarter, is that sustainable going forward? Also, given that steel prices have now begun inching up and copper prices are inching up, how should we look at this, sir?
As Manish has generally heard from us, we've maintained that margins ought to be monitored on an absolute basis, given that there's a meaningful route by which the percentage can be moved either upward or downward, depending on the situation or on the cycles we're entering. So our recommendation remains the same: please emphasize the improvement in our absolute margin, and we're confident that we will definitely enhance that margin both year over year and quarter over quarter.
So, M, what kind of timeline are you looking at for passing those costs along? Is that revised on a monthly basis?
The duration is 3 months, and with 1 month as a leg in, that makes 4 months in total for the leg — though again, it varies from customer to customer, so on average you can think of it as four months.
Yes sir. And regarding the free trade agreement — are we already seeing any immediate gains from it? I mean the one India signed with the UK and the EU, and also now with tariffs coming down in the US — how should we view the prospects going forward?
Clearly, export demand is going to rise. That is what we expect. There aren’t direct connections, but there certainly are connections, and given that this product of course has multiple uses and serves multiple industries, we can’t trace the benefit end to end, yet yes, we view that as a favorable result for our business line.
All right, and that brings us to the final question.
In the US, our share wasn't particularly large—roughly 8% to 9%—so to that degree, you know, we were fairly neutral, or agnostic, about it.
Sure, absolutely. One last thing, sir, regarding the new facility — we've now begun work on building number two, the second building too. So what sort of ramp-up do you foresee, and what visibility on utilization do you have for it in the coming year, and can it get back to margins at the company level next year?
We expect to move on it early, but as we've said, any new capex we commit to generally takes 2 years to hit its peak, and we're on that same track. Nothing there looks behind schedule to us.
Sure. Thanks a lot for all of that, and hello. Thank you. Yes, no, just one question — I just wanted some clarification on this Q3 presentation: the International revenue share has been restated for quarter 2 FY26, so is there any reason for that? Was there a typo earlier?
Yes, we found a calculation mistake in there. During the previous quarter, we had a math error. We've now fixed it.
All right. Since even Q1 carries a notably larger portion of revenue from outside the country, it would help if you could give us that figure.
Right, so that explains Q1 and Q2 — there was a math mistake. The base figure has now been fixed, and that's exactly why the earlier years came out right.
Alright, fine, Molly, I'll take it from you. Yeah, I'm getting those figures from you. Thanks a lot.
Appreciate it.
Thanks. Our following question comes from Jamie at AR — they're referred to as asset Manager. Go right ahead.
Thanks for the question. First, on the European demand side — how are you seeing it? I mean, what does your current inquiry pipeline look like with European OEMs? Any color you can give on how that's advancing?
My apologies for cutting in—your audio isn’t coming through clearly.
Hi there — are you able to hear me at this point?
Yes sir. Yes sir.
I just wanted to get a sense on the European demand side — is there any new program for the RSQ moving toward the prototype for the validation stage, or any new program means? For the global sourcing mandate, which gives us comfort for sustainable double-digit growth in the near term. On Europe.
So from the standpoint of customer engagement and all of that, we keep responding to RFQs, but for us the cycle from RFQ to realization is quite long. What we observe is that what our customers ask us to develop ends up being a better benchmark for how growth is coming and how things look, and that has stayed strong despite everything we've seen over the last 1 to 1.5 years — that part has held up well. We're involved in a few more RFQs and further opportunities, but whether those projects move forward gets decided by a range of factors, and it isn't solely in our hands or down to our competitiveness. These are big macro-level, big projects that depend on how our customers are approaching various things. Overall, though, I'd say it stays positive — though I should note that this isn't a very accurate indicator for us.
Understood. So regarding sales to your Japanese customer, on a YTT basis those should stay flat. Is that more a matter of the program ramping more slowly on the customer's end, or is it something like a technical delay on our side?
It's somewhat a mix of factors. I noted during the prior quarter that certain programs had slipped on our side, and part of it came from customer demand and postponements, among other things. So it was a combination, and we're quite optimistic that we'll get back on track. And also, Jamie, there are the worldwide backlogs to consider, since because of worldwide uncertainty, customers were likewise putting off their longer-term decisions about moving or expanding their supply chains beyond what they're used to. So we're seeing matters calm down on the worldwide front. These items will pick up now.
Understood, sir, understood. And we get it — I mean, you know, Advantage Front. I mean, reaching an optimal mix won't take 2 years. If you could just help us out here — I mean, what does your scale-up look like for next year, for next year itself? How should we think about that? Is there any holdup when it comes to customer validation? Anything on that color front?
No, it's online, Jaimin. But given that this is a new plant and still at an early stage, give us a quarter or two more, and we'll be able to provide you with better guidance, taking into account where things stand with customer acceptance and approval over there. But yes, as we said, we see ourselves on the same track to reach the optimum level within two years, or roughly two years from our capitalization, and we see that ramp-up will come, and it will arrive faster once we secure the approvals.
Understood, sir. Understood. Yeah. That's all from me. Thanks a lot. Thank you.
Thanks. Our next question comes from Jason at IDBI Capital. Your line is open.
Thanks for taking my question. Am I coming through clearly?
Sure, sure, sure, sure.
Yeah, yeah, sure. So the first question is really about when I take this as console minus standalone. That gives you the subsidiary numbers. So looking at it, the loss comes to roughly 157 million. Now I understand that even this quarter, there are 4 crore of losses from Advantage and 4 crore of losses from the overseas subsidiaries. That's how it's playing out. So sir, in light of that, I just wanted some color, since 26 is almost done. So how should 27 look when you look at, you know, even looking at Advantage and looking at the OC subsidiaries, how do you see it? How should this loss thing go forward, or some profitability — just some color on these two aspects is what I wanted from you.
Jason, before Vishal or Maulik continue, I want to clarify some arithmetic. At the subsidiary level, as I mentioned, the loss over nine months comes to roughly 6 crores — correct. And for Advantage, as you can see, we've already provided the number: that advance take was approximately 9 crores. That's how you arrive at 15, right. Over 9 months. 15 crores, right.
No, no, no, sir. Look at the total loss from the subsidiary. Okay. Just to be clear. So the figure I gave — what I said — 157 million covered nine months. Okay. So that's the exact number. What I'm seeing is a loss of 157.
All right. On a simple console basis, excluding standard items—yes, yes, yes, yes. Reported pat—yeah. So with this figure, let's not mix things up. But I get that it combines the Advantage loss with the OC subsidiaries' loss. That's mainly what makes up 80, 90% of it. Yeah. So I just wanted to understand how this gets to 26 and 20. 26 is nearly finished. 27. How do you see these two factors playing out? How should it—how should we view it? So that's what we mentioned. We'll provide better guidance on 26 at the quarter four year end. But just as a heads up—yeah—obviously Advantage will turn positive, and China keeps growing within the same territory at an improved margin. And Roman—our intention is to get it to break even quickly at the EBITDA level, then at a profit level. That's the main intent.
All right, all right, got it. So I’ll be watching for the Q4 guidance. Sure. And sir, regarding the standalone revenue that we ought to be able to track — I mean, you did bring up standalone engineering revenue. I just wanted to ask. A 10% revenue growth should be a reasonable assumption for 26 and 27 as we move forward. We should be able to achieve this. 10% revenue growth at minimum.
Yes. And the answer's the same. Wait for Q4N. Yeah, but. Yeah, I mean, you might.
Yeah. Yes, yes, yes, yes. Okay. Okay. And sir, regarding this ramp-up you referred to — Advantage is going to take 2 years. Okay. For the ramp-up. I get that. So peak revenue once more, probably 2x is a reasonable assumption. So how much of the investments sit in Advantage? I just wanted to know. So I mean, just a calculation of peak revenue.
Regarding the plant and machinery investment — yes, you can think of it as 2x. 2X.
And as for the infrastructure, land, and buildings — how much of that is there? Yeah, yeah.
Right. Right now, investment comes to roughly 210 crore and up. I have the exact figures here. All right. But a large share of that is infrastructure along with land and buildings. Then there's machinery at about 100 crore plus 120 crore or so. That's going to be.
All right, so the 2x applies to the machinery. Got it. Okay, understood. Yes, sir. Fine. Alright. Alright. And as for the main products, they come from.
Sorry, Jason. We'll also be adding machinery on an incremental basis, and that's still in the pipeline. And we will provide that as well in the guidelines.
Yeah, yeah, absolutely. Naturally, it can only apply to plant and machinery. The remaining infrastructure counts as shared infrastructure. Understood, sir. And regarding the key products from Advantage that you brought up earlier, I just wanted to confirm. The bushing stampings along with the large-sized cages — those are the primary items from Advantech. Is that correct?
That's correct — the additional growth plus the new business coming from those three lines.
Yes, sir. I have nothing further to add. Thanks. I really appreciate your taking the time to respond to what I asked.
I appreciate it.
Thanks. We'll take our next question from Saket Kapoor at Kapoor and company. Please go ahead.
To build on what the participant just said, for advantage, the product profile would lean toward bushing and large size cages.
Is that right?
Yeah. And sampling a bit.
All right, I believe so—regarding the large size cases, you mentioned the market earlier, and there were a few deterrents we were attempting to address properly. How would you describe the business environment or demand when it comes to the last size cases, and what are the fillers?
A few quarters ago—actually, a couple of quarters back—we noted that the industrial product market was quite sluggish, and that was why growth in large size was very moderate, or not much at all. We may have said that. I think we're now seeing that turn around, and on top of that, we're looking at further product development for the future in this area. So yes, those factors are improving somewhat compared with what we mentioned earlier.
Alright, on the total investment for Advantage — is that all of the capex finished? And then regarding the commercialization piece, what's any closing figure for capital work in progress? Is there one?
In the earlier questions? I already mentioned in the prior question, Saket, that the incremental plant and machinery will keep going in advantage, considering that wherever additional capacity is required and wherever we see incremental growth can come, we'll keep having plant and machinery spending there.
Even so, I maintained that we have something worth commercializing. If you could put a date on it, I'd like to know how much could be invested for this unit, land included—or whether you could break that down for me.
As for answering what you asked, yes — some work is still in progress on the CAPEX side as well, including on the building side. There are other buildings, such as admin and others, that are under capitalization and yet to be capitalized, and some plant and machinery is under installation, so the rough number is around 40 crore. That's the figure off the top of my head.
All right, so as of today, what would the total investment be for this unit overall — at the first?
It's still going on, but yes, we expect it to wrap up this year at roughly 250 crore plus. On the 250, and the peak revenue from this will also be 2x, or will it be different to assume today — because of that, the large size cages and the bushing part — what peak turnover should we expect, or is it the asset turnover issue? 2X of the plant and machineries, but you also have to keep in mind the incremental plant and machineries that are to be in the pipeline, but yes, 2x of the plant and machinery, not of the full capex.
All right, then. Thanks for those thorough responses, and best of luck to the team.
Thanks.
Thanks. Our next question comes from Jason at IDBI Capital. Your line is open.
Yes, sir. Thank you for the opportunity to ask again, sir — this is my final question. We were simply hoping to find out, sir, regarding CapEx, what guidance you're providing for 20166 and 27 at the console level.
Just hold on for the fourth quarter. Jason, my response is identical.
Alright. Of course, of course. Certainly, sir. All right. All right.
Thanks.
Appreciate it. Is there a—no further questions from the participants, then. At this point I'd like to turn the conference back over to Mr. Vishal for his closing remarks. Go ahead, sir. Thank you.
I'd also like to take a moment today to express my appreciation to everyone for the ongoing trust and backing you've given Harsha Engineers. And with that, I wish each of you a very good evening. Many thanks.
Thanks.
Thanks, everybody.
Thank you. That brings this conference to a close on behalf of Harsha Engineers International Ltd. We appreciate your participation. You may now disconnect your lines. Thank you.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Harsha Engineers International Limited transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Harsha Engineers International Limited earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.