Harsha Engineers International Limited (HARSHA) Earnings Call Transcript
November 4, 2026
Earnings Call Speaker Segments
Good day, everyone, and welcome to the Harsha Engineers International Limited Conference Call. <<operator_script>> Please be aware that this conference is being recorded. I will now turn the call over to Mr. Vishal Rangwala, the company's CEO. Thank you, and please go ahead, sir.
Hello, and good evening everyone. Welcome to the Harsha Engineers Quarter 2 H1 FY 2027 Post Results Update Call. Following our usual approach, I'll briefly walk through how we view these figures and share our thinking, after which Mr. Maulik Jasani will provide further detail on the numbers. That said, I assume you've already had the opportunity to review both the numbers and the presentation. If I had to sum up our quarter 2 performance in a single sentence, I'd describe it as business as usual and largely on track. Let me nevertheless touch on our main business verticals, beginning with our India Engineering business, which comprises Harsha Engineers International together with our wholly owned subsidiary, Harsha Engineers Advantek. As the numbers show, we saw strong top line growth of over 24% in quarter 2, with an equally strong 23% in the first half on a Y-o-Y basis. This growth came more or less from nearly all the key verticals, including Cages, Bushings and Stampings. On Cages, I'm pleased to say we've seen decent demand traction from both the industrial and automotive segments in India.
On the export side as well, we've been seeing demand that remains strong, coming mostly from the industrial segment across key geographies — Europe, the U.S., Japan and other countries. Also, as we announced previously, the new resourcing outsourcing project we announced last year is progressing quite well, and we anticipate that commercial sales under it will begin at some point in quarter 3 and quarter 4 of the current financial year. And genuine visibility will begin to emerge in quarter 4, though sales tied to this project will ramp up gradually. At peak, sales could hit a run rate of roughly INR 75 crores per year. We are also at work on a couple of additional resourcing and outsourcing projects out of the Europe and North America markets. The first one is comparatively small, yet it sits at a fairly advanced stage of development, and we expect commercial sale there to begin somewhere in financial year '27, '28 as well. As for the second project, we have only just begun initial development on it, and it could start somewhere in financial year '28, '29. Then again, within the Cage category, we have strong demand visibility for large-sized Cages, and we anticipate a significant sales ramp-up in this segment during the second half of financial year 2027, which ought to produce overall annual growth of at least 20% in this segment in the current financial year.
In a similar vein, we're beginning to see reasonable growth in Cages sales to our customer based in Japan. And while it's slow, it should certainly gain momentum over the coming quarters, and that gives us confidence in annual growth of more than 10% to 15% for this segment. Finally, as I mentioned, exports out of India have stayed quite robust, with our H1 exports at roughly INR 280 crores versus the INR 480 crores in annual exports we achieved last year. So now speaking of Bushings, as I noted on the earlier call, I'm confident we should manage about 30% growth in the current financial year in this segment, helped by solid demand visibility from key windmill gearbox manufacturing companies. And we've also developed newer Bushings designs for these customers. We stay very bullish on this segment going forward, with our annual sales target of reaching about INR 300 crores within three, four years at some point. Likewise, speaking of Stampings, we're also seeing very good traction for our key Stamping components, which include certain specialized railway seal inserts, AC compressor components and certain other automotive components. And we've recently launched a new category in the AC air conditioning segment compressor, known as accumulator, which has very good demand potential.
So we have a fair amount of confidence that this segment will see sales growth above 30% in the current financial year, versus the roughly INR 72 crores in revenue sales we posted in FY '26. We also believe that with the new products we are in the process of developing for this segment, targeted annual sales here should get to around INR 300 crores within the coming four years. To wrap up, I can say with satisfaction that our India Engineering business is turning in satisfactory performance on nearly every front. Turning now to the Harsha Romania facility: internally, we have worked out a plan to downsize operations and, along with that, bring down operating cost. That said, we will keep our focus on growing sales of finished Cages from our Romania facility. Our view is that this will be a good, viable model — a medium-term strategy — and our target is to arrest the operating losses incurred in Romania, which we believe is achievable by the end of the current financial year. So our thinking is that the next financial year in Romania may deliver a lower level of sales, but it should still be a relatively positive contribution to profitability.
Turning now to China: during quarter 2 of FY '27 we came in somewhat softer on a sequential basis relative to quarter 1. Year on year, it has nonetheless delivered decent growth, and we anticipate a reasonably strong showing continuing through the remainder of the year. EBITDA in China presently sits at a single digit, yet we feel it ought to strengthen going forward, supported by a relatively stable demand picture there. Our expansion projects are moving ahead quite satisfactorily. So the Advantek expansion project — a substantial increase in capacity for producing Bushings, Stampings and large-size Cages — remains on track. Production there ought to begin within the next few quarters. Likewise, the brownfield expansion in China, where we are building capacity to manufacture steel Cages for the industrial and auto sector, ought to start producing at some point in quarter 3 of FY 2028. In summary, I would like to restate the growth guidance we gave on earlier calls, namely that on a full year basis for FY 2027 we ought to deliver sales growth in the mid- to high teens in India, whereas consolidated it could land anywhere between 10% to 12%. At the same time, a note of caution.
Let me say that in the past, demand in Q3 has generally been somewhat weak, given that nearly every big international buyer closes its accounting year at the end of the calendar year, so things tend to look a bit slower. Those buyers tend to ease off their purchasing somewhat. So the guidance above ought to be viewed on a full-year basis. I'd like to thank all of you for your continued confidence in Harsha, and I wish each of you the very best. With that, I'll ask Maulik to carry the presentation and the numbers forward.
Thank you, Vishal bhai. Hello, everyone, and good afternoon. For the quarter ended September 26, at our consolidated level the Engineering business achieved a top line of INR 428 crores, against INR 363 crores in the same quarter last year and INR 421 crores in the immediately previous quarter. We achieved consolidated EBITDA for Engineering business of INR 81.1 crores for the current quarter, against INR 63 crores in the same quarter last year and INR 69.8 crores in the previous quarter. On EBITDA margin, we see a consistent increase for stand-alone as well as consolidated level based on our last few quarters' performance. In Solar business, we achieved revenue of INR 11.9 crores and EBITDA of INR 0.73 crores in the last quarter. Solar business still has a good order level due to PV sales relaxations from government up to December '26. Overall working capital at our consolidated level is around 135 days, against 139 days in the same quarter last year and 116 days in our previous quarter. We incurred CapEx of INR 35.6 crores in the last quarter. For the last quarter, revenue from Bushings was around INR 42 crores, Stampings was around INR 23 crores and LSB was around INR 14 crores, which grew by 26%, 19% and 35%, respectively, compared to the previous quarter.
Japanese customer revenue came in at roughly INR 24 crores, which represents 15% growth compared with the prior quarter. That wraps up this quick rundown of the financial figures, and now I'll pass things to the operator so we can begin the Q&A with participants.
<<operator_script>> Our initial question is from Nisarg at Pkeday Investment Office.
Let me start with the Romania business. We’ve had quite a few profitability challenges there. And looking ahead to the next year, our plan is to get to operating profitability — but will that also translate into net profits for us?
Yeah, saying that would be too premature. We're looking at it very positively and are hopeful as we work on bettering the cost structure along with a few other improvements, though a variety of factors come into play. Still, we're fairly confident about generating operating improvements, and then full profitability may hinge on multiple factors.
We’ll continue to provide updates every quarter.
And what does the road ahead look like for Romania? If growth isn't going to materialize, then what's our plan and strategy as a business when we look at Romania?
Romania is a market where our Cage business keeps expanding. That said, given the numerous cost pressures we're facing, giving a completely clear answer to that question is quite hard. We're assessing the situation and will provide an update once we have clarity on it.
Understood. Regarding China, what sort of growth do we expect over the coming few quarters and the year ahead? It had been recovering, and that was what was provided. So how are we viewing it at present?
Broadly speaking, for the portfolio and business we have today, growth looks moderate—roughly 5% to 7% is our estimate. But once our new capacity starts up, that adds a fresh product portfolio, and growth should speed up from there, driven by the launch of new production, new products, and so forth. At present, we plan to have that capacity running from the third quarter of FY '28—so the second or third quarter of FY '28. That's the point where we hope to see extra growth arrive.
Varun Jain from Dolat Capital has the next question.
Okay, so I’ve got a couple of questions. First, sir, for this quarter, gross margins were very strong at 51.7%, and they’ve gone up versus every other company in this space — all the bearing companies are seeing margins decline. So is that because of some price pass-through we were able to do? Or is it because the solar share was low?
Yeah, it's a combination of the two, Varun. As you pointed out correctly, the main drivers are a similar blend of both. Some pass-through has occurred, since over the last six months we've seen brass prices rise, and brass is copper plus zinc. So a portion of that has already been passed through. As you're aware, our mechanism is quite standard. And certainly, in this quarter, Solar contributed at the lower end of the total top line. So at a consol level, we see a better margin.
So a margin like that, particularly at the EBITDA level — we're at, if I look at the India Engineering business, it came in at 23.7%. So will it hold around this level, and perhaps tick up slightly over the next two quarters?
Like we've mentioned before, at a blended level, we're looking for margin to hold sustainably above 20% over a longer horizon, instead of judging it quarter by quarter. But it also appears that we've got an improved product mix performing across the overall India Engineering business. And we view that as a permanent shift toward a somewhat higher margin. It's a bit early to state what a fully stable margin looks like. Still, yes, over the last few quarters, we've been seeing margin better than the blended guidelines we're providing. So that's a 100 to 200 basis point increase.
Varun, I'd say a margin in the neighborhood of 22% is a more steady-state kind of figure for us to assume.
Sir, once other income is excluded, what does that figure come to?
Varun, we'll handle the reported EBITDA margin discussion. Yes, you can take care of the rest of the.
Right. Understood, no problem. Then, sir, second point — from what I see, many of the bearing makers have gone quite heavy on CapEx. SKF India is spending close to INR 500 crores, SKF Industrial INR 800 crores. Then CRSKF Industrial 800, and Timken has put in roughly INR 700 crore at Bharuch for SRB, CRB. As things stand today, are we getting 100% of the Cages share across all of these companies?
Yes. We think we're getting a very big portion of that added business. And we're seeing solid traction in the market for it. I don't have an official or precise figure — what share and things like that.
Perhaps just to frame it this way — given how well we know our customer relationships, market share isn't going to slip away from us. It's going to grow.
Sure. And sir, for these too — for these higher-value items, let's say CRV, SRV, industrial bearings — is that case only 5% of the TAM? Or would it be a bigger figure? So if the revenue potential is INR 700 crores, then what does the Cage TAM come to? Is it INR 35 crores, 5% — or is it larger for those?
I'd say giving a complete, proper answer to that question is tough, but our estimate remains roughly 5%. Depending on the product size and similar factors, there are some ups and downs. Still, broadly speaking, you can continue to treat it as 5%. Yes.
Understood, sir. And sir, second, regarding Stamping — Stamping has posted quite healthy growth. So will you get to the — earlier our guidance was that we reach an annual revenue run rate of INR 150 crores to INR 200 crores in basically three, four years. Now it looks like we can get there in FY '28, the next financial year itself. So is that possible? And what percentage of Stamping sales comes from this accumulator product?
We won't provide more detail on Stamping at this point, Varun, given that we've only just entered this business, and we intend to address the larger scale at a later stage. That said, yes, I think that -- and Vishal Rangwala can chime in here, but I think we will certainly pull forward some of the achievements on the Stamping side given the volume we currently have. As for exact time lines, whether that means the end of FY '28 or H1 of FY '29, we'll know later, and we'll give you a further update. But yes, we do see growth there.
Yes, of course, sir. And sir, regarding the Solar business, what revenue guidance do you have for FY '27 and FY '28?
It's comparable to what we've indicated, in the INR 150 crores to INR 200 crores range. That said, this business is more cyclical and is subject to government regulations—both on imports and on subsidies—so we need to stay watchful.
Our following question is from Harshit Patel at Equirus Securities.
I'll start with my first question. Our first-half revenues rose roughly 21% Y-o-Y, and India Engineering revenues grew over 22% Y-o-Y. That's ahead of the low to mid-teens and mid- to high teens growth you guided to last quarter, and also ahead of what you guided to today. So sir, that would suggest a very soft second half. Is that what we're seeing? Or could there be meaningful upside to our guidance given the product pipeline, projects, and visibility you have, and you're simply being somewhat conservative on the guidance front. Some color on this would be helpful.
Yeah, Harshit — the way I'd put it is that in Q3 and Q4 of last year, we were already starting to see indications of solid growth. So with that in mind, we're saying that, relatively speaking, we need to be careful when compared with last year's figures. At the moment, we're seeing pretty decent growth, but clearly there are some headwinds and challenges out there in the market — in the bearing market — as well as the ones we deal with ourselves. That's why we're being a bit conservative and cautious.
To add to that, Harshit, I don’t believe anything negative is being suggested here. What Vishal and the entire team feel is that we ought to be somewhat conservative given the fact that previously — and take, for instance, the overall picture — China is somewhat soft, though it will expand, just not at the same ratio as India. And Romania is the biggest challenge. So we have certain specific plans for Romania that we will roll out over roughly the next 1 quarter, but we have given a hint about some downsizing. And that is where, on an overall basis, we don’t think we should be able to — so Harsha, India will 100% grow at a higher rate. Harsha, Romania will in fact be on the negative side. So we are saying that <<foreign_lang>> on a consolidated basis, <<foreign_lang>>, that is what Vishal has guided. And India will definitely grow stronger. We are not implying anything negative on the India scale.
Got it, sir. Sir, my second question concerns what you just said about the Romania downsizing. Could you help us understand what that downsizing would involve with regard to capacity, headcount, and any possible one-off costs?
Harshit, let's focus on this together. We'll make the announcement when the timing is right.
To share this here, our focus is making sure we stop the losses. And whatever steps are needed for that, we'll take them, whether with a customer or inside the organization.
And to reinforce what Vishal made clear, our goal is to grow Cages sales while cutting the losses. So naturally, anything that's losing money, we have to ensure it doesn't — so — but yes, we're working on that. Perhaps in the next quarter, we should be in a position to share a more concrete announcement with you on this.
To clarify this point, Harshit bhai — at the time Vishal provides guidance, that guidance does not factor in adjustments for metal movement. So it's possible that this growth also shows up when you make that comparison.
Yes. Absolutely. Understood. Just a quick follow-up question regarding this rise in metal prices. So, with all the inflation we've encountered up to now, has it been fully passed through, or is there still some portion remaining that we'll likely see in the third quarter and fourth quarter, which could perhaps keep our gross margin expansion going? I ask because gross margins were at a fairly strong level given all the pass-through that has already occurred. So what I'm trying to get at is whether any further pass-through is still needed, or whether we're broadly covered at this point?
Harshit bhai, it's been a pretty continuous situation. But yes, we're seeing very sharp spikes over the last four, five months. Now, if the metal price settles, then we see a significant pass-through has been completed. But if metal prices keep moving, whether upward or downward, we'll see an additional impact from that. So effectively, I can't say it's 100% done, because this is very much an ongoing matter and each customer has different timelines. So certainly, we see that if metal prices settle, this margin will either improve or stay at the same level. But on further changes, Vishal bhai can add.
And I'd add that we're also feeling cost-side inflationary pressure on the share that isn't passed through — a lot of indirect items and so forth — and that's something we're working to get through and mitigate. So that too stays an ongoing challenge for us.
Moving on, our next question is from Prasenjit Paul of 129 Wealth Fund.
Sir, my question concerns H1, where we can see quite robust consolidated growth of roughly 20%. So how much of that can you attribute to realization growth? And how much will actually come from volume growth? Also, whenever raw material prices settle down, could we expect any kind of degrowth? Or, speaking purely from a volume perspective, what sort of volume growth are you planning for FY '28 or in the second half of FY '27?
Yeah. So generally speaking, we're planning on a worldwide basis — we're aiming for volume growth of roughly 12% to 15%. And then how metal prices, pass-through, and all of that play out will affect the value, I think.
All right, so for H1, or the quarter we've already reported in the results — if I'm asking about the growth so far, how much of it would you consider realization-led? Within that 25% growth in H1, what portion comes from realization, or from price increases?
We figure roughly 4% to 5% of that ties to something involving material pass-through, and the remainder is genuine volume growth.
Alright. And sir, on the call before last, you said that using the capacity we already have, we can get to roughly INR 2,500 crores to INR 3,000 crores of revenue. Do you have any long-term vision for how many years it will take to get there? And after that, would we need another significant capacity addition? Or do you expect that in FY '28 there won't be any major capacity addition and debt reduction will be the priority? So if you could share some long-term vision?
I think over the long term, we've said that we expect roughly INR 2,500 crores to INR 3,000 crore in revenue, coming from a mix of our current capacity plus the new greenfield investment and expansion that we're working on. Some of that is already finished, and some is still in progress. Regarding the existing capacity, the figures we've given are peak figures — meaning if demand in every subsegment of our product line matched the capacity, that's the kind of number that could be reached. So it's genuinely hard to say whether that will play out exactly that way. Again, we don't get into those specifics, and what we tell you is that yes, even with that capacity, we'll never reach the 100% figure on each of those subsegments. And beyond that, we have to consider the overall situation.
All right, and one final thing — is there any plan in place to bring down debt? Or will you need to take on significant borrowing over the coming year, FY '28?
Right now, we aren’t factoring in any incremental borrowings for FY ’28. What we’ve already drawn down relates to our Advantek expansion plans as well as our China Phase 2 expansion plan, both of which we’ve already announced on earlier calls.
We feel quite at ease with the debt level as it stands today. So there isn't really a plan specifically aimed at reducing debt, in the way you might be suggesting. That's because it's supported either by a lower interest rate or by the government subsidy.
Our following question is from Sanmat Jain, who is calling in with KamayaKya Wealth Management.
Yes. I just have one question, sir. So with the bearing supply shortages we're seeing right now in the U.S., are our top global customers moving more of their U.S.-bound Cage production over to Harsha? And how much is this tailwind adding to our current order book?
So I think we're looking at a supply situation that's very long-term in nature, and beyond that, we keep seeing growth in the U.S. within our portfolio. I can't give a complete answer, since bearing sits one level below me. Should any issues arise in the bearing supply chain, I can give assurance on one part, but Cages isn't the cause, and we're tackling aggressively whatever demand challenges or opportunities come our way. Over the long term, our expectation is that the U.S. will keep growing, and we're seeing good traction. Also, we're collaborating closely with our customer in the U.S. to meet any requirement or opportunity.
Kaustubh from Paul Asset has the next question.
To start, congratulations on those results. Most of what I had was already covered, so I'll just follow up regarding Romania. After the downsizing, what annual revenue and EBITDA run rate should we expect for H2 this year and FY '28? Also, are there going to be any restructuring charges or a onetime loss?
As I said in response to an earlier question, we're still working through all the fine points and specifics. Give us another quarter, and we'll bring you all the detailed answers, along with the disclosure as well.
Right, got it. I just wanted to check whether Romania could turn EBITDA positive in Q4 of this year.
That's what we're aiming for, though at this point we can't confirm it. It's still a bit too soon. Quite a few challenges lie ahead of us.
Our following question is from Aditya at Old Bridge Mutual Fund. Congrats on a solid set.
Sir, my question concerns the CapEx side. In quarter 1, we guided for CapEx of roughly INR 50 crores to INR 80 crores for the full year. During H1 this year, we have already spent INR 73 crores at a consolidated level and, I believe, INR 9 crores at a stand-alone level. So what is the expected CapEx now for FY '27? And could you also give us a split, or how much of this CapEx is going to Advantek and China?
Aditya, perhaps there's a bit of a misread or a misunderstanding here. When it comes to India alone, the CapEx is roughly INR 110 crores over the next 1 to 1.5 years, which we announced at the start of the year, and it's mostly going toward the next phase expansion of Advantek. We've also announced China CapEx of about INR 100 crores. That one, again, will take roughly 1.5 years to finish. So for 18 months of CapEx, what we've already announced comes to around INR 220 crores, and of that, as you correctly pointed out, the first half is a little over INR 70 crores. On the remaining portion, we're actually speeding up our CapEx plans in both India and China. And we think that rather than 18 months, we'll be able to wrap it up in about 12 to 15 months, depending on the case. We'll keep this CapEx going through the 15-month mark — perhaps we can say up to June '27 is when we expect both of these CapEx sites to be completed. The go-live may take somewhat longer, given the customer approvals and trial requirements. But yes, the CapEx spending will be finished by then.
All right. One final question from me. For the Harsha stand-alone business, what would maintenance CapEx need to be each year for that to happen?
At a consolidated level, Harsha, I'd put it at roughly INR 25 crores to INR 30 crores, since we also require some operational or maintenance CapEx for the China Romania site.
Jason Soans from IDBI Capital has the next question.
Congrats on the strong results. I just wanted to ask, if possible — for FY '26, our engineering business on a consolidated basis has turnover of roughly INR 1,440-odd crores. Could you break that down on an annual basis into steel cages, brass cages and bushings, polyamide cages, and stamp components? I'm just trying to get a rough sense of what proportion comes from this segment.
No, Jason, you're already getting a solid breakdown of Stamping Bushings and LSB, which are our growth drivers. What's left, you should assume falls under our other Cages. We've already provided guidance that industry has picked up, and that industry pickup is contributing to both a larger steel business and a larger brass business. That's the guidance we've already given.
Once more, on the industrial portion, we've previously given you a broad picture of that side and of automotive. And once more, as a general rule of thumb, the bulk of industrial is brass, though that isn't always the case. Right now, plenty of large steel Cages are also heading into industry as well. So frankly, it would get far too complicated.
All right, all right. And I didn’t catch the growth that’s expected in the Stamping business — I mean, the anticipated growth for FY '27. Could you say that again, if you can?
We just mentioned that Stamping's growth figures have sped up, and we expect that acceleration to keep going. Our initial guidance was about 30%-plus, and we saw some acceleration take place in the last quarter. We anticipate that the business will continue accelerating. We haven't provided any updated guidance up to now.
Alright. Alright. Alright. Got it. And sir, I mean, whenever you examine the consolidated figure excluding the stand-alone entity — that's essentially the subsidiary — right now I grasp that it covers the overseas subsidiaries along with Advantek. Therefore the figure there works out to roughly a loss of about INR 123 million, or somewhere around INR 12 crores odd. I mean, so I gather H2 is going to be positive for Advantek, and after that you're attempting to reduce the losses in Romania. So is it fair to expect a positive — you did mention one line in the presentation, but could we expect a mildly positive or mildly negative number by the end of FY '27?
Taken together, all three, we expect it to be positive, including Advantek. China and Romania. -- for H2, yes.
Vaibhav Shah from Equirus Securities has the next question.
I'll start with a question about the Stamping business. Could you give us more detail on the products you have in development right now, especially those for the Aerospace and Defense segment? Specifically, what applications do they serve, and what end platforms are the systems where these components go into? Also, how should we view the overall opportunity here, and what commercialization timeline should we expect?
I won't be able to discuss particular applications or current development work we have underway. Broadly speaking at the moment, I'd characterize it as not a very big opportunity for us. Relative to our Stamping product portfolio, it's small, and it holds decent potential. Still, as things stand today, directionally, it isn't very large.
Turning specifically to aerospace...
Ladies and gentlemen, we have lost the connection to the management line. Please remain on the line while I bring them back on.
My apologies — I believe the connection dropped, but we'll go ahead.
My apologies for that technical issue—could you ask your question again? Sorry, we didn't catch it.
That mostly related to aerospace and defense — on the stamping side, the commercial timeline and the overall opportunity.
Yes. At this point, you could put it that way without getting into specifics — for us, the opportunity today is fairly modest relative to Stamping. I'd put it at roughly INR 20 crores to INR 30 crores. And we're still pursuing additional opportunity when it comes to aerospace and defense. However, our opportunity on the Stamping side, where we're working on other components, is quite large. And with aerospace and defense, we're working right now to expand that. So we're also trying to get a handle on the market and on what the genuine opportunities are for components — both those we've already made and what's in the pipeline in development.
Got it, sir. Sir, my second question concerns the significant CapEx that has been undertaken for the new Bharuch facility, which is for localizing SRB and CRB and is currently ramping up. So how do you view the demand that will arise from this particular area? And to what extent is this expected increase in our business, and has it also been factored into our revenue guidance?
Yes, all of that is accounted for. Demand from that source looks positive, and our guidance already reflects it. I can't get into specifics, but we believe we're seeing — I mean, that's definitely having a favorable effect.
Manish Goyal from Thinqwise Wealth Managers LLP has the next question.
Sir, my first question — could you give more detail at the subsidiary level? Earlier we said Harsha Advantek would be PAT positive in FY '27. In the first half we've already seen losses of about INR 7 crores, against roughly INR 12 crores last year. So how should we think about the FY '27 figures? We were expecting revenues of INR 140 crores. So if you could give the numbers for Advantek — first, what's the potential? Second, what kind of investments would there be if we look at Advantek alone, happening maybe once this expansion is done by June '27? And how much borrowing is earmarked for Advantek? I'd just like to know what peak interest and depreciation would be from this 100% subsidiary. And what about the overseas operations combined — or perhaps you could share what the losses in Romania and the profits in China might be? China had a profit of INR 5 crores last year and Romania had a loss of about INR 14 crores last year. That was my first set of questions.
Thank you, Manish. I'll do my best to cover as much as I can. Regarding Advantek, we remain on track to meet our revenue guidance of INR 140 crores, or perhaps even slightly above that, for the year. That said, our further expansion plan means we've begun incurring incremental costs there, including operating expenses tied to future growth. And as you correctly pointed out, a full slate of interest and depreciation has also started to come into play for our first phase of expansion, which is now complete. As we've stated, we expect H2 to be profit positive and to contribute favorably to our overall Advantek performance. Looking ahead, once this phase of expansion and the new building expansion plan are finished, we anticipate CapEx of roughly INR 350 crores plus at the overall Advantek level, of which building and infrastructure would account for around INR 100 crore plus in spending. And I see the total CapEx loan we'll take on as approximately INR 250 crores in Advantek. The remainder will be capital funding from HA Engineers International.
To clarify, Maulik bhai, I believe your point is that although we'll be profit positive in H2, on a full-year basis that might not be sufficient to fully offset the INR 7 crores lost during the first half. There may still be a small negative figure reported, but let's see. We'll wait and watch.
For Q2, the combined loss across our foreign subsidiaries comes to INR 1.7 crores. We don't provide subsidiary-level figures on a quarterly basis. Once the year is complete, you will certainly have that breakdown.
Yes. But as we've said, it will be — yes, things are getting better, and by year-end it might reach a low single-digit figure at the foreign subsidiaries level. So that's a lot lower than what we saw during the prior year.
Right. So the losses are going to come down quite a bit — instead of INR 10 crores or INR 11 crores, they'll be below that. And Advantek, okay. So could you just tell us what peak interest and depreciation at Advantek will be, sir, perhaps in FY '28, just so we get a sense of it.
Depreciation is going to continue climbing. Yes. When we look at FY '28, I'd put it at...
Is it 2028 or 2027?
Those figures are solid, sir.
Right now, if you add up the figures, sir, it comes to roughly INR 7.5 crores to INR 8 crores. And once interest and depreciation are both fully in play, we see that figure rising to a maximum of INR 10 crores.
All right. Combined, both of them. And this is also on a quarterly basis, correct?
Correct — that's exactly right.
Moving to my second question, sir, it concerns your opening remarks: Mr. Rangwala brought up projects related to in-sourcing and resourcing, and one of them should begin contributing from Q4. So did that refer to the Cage project — the one contract we announced last year that is probably headed into production in Q4? And perhaps you could shed a bit more light, such as what sort of potential opportunity is emerging in this in-sourcing and resourcing area?
Right. So as I said in my remarks, that's indeed the one we'd announced before, and it's now taking effect. Realization should begin in Q3, and things ought to return to normal by Q4. As for the potential, what I've mentioned is roughly INR 70 crores to INR 75 crores in annual revenue — that's what this offers.
At the peak.
Right, so at the peak, when this project was at its height. And at the moment, we're pursuing resourcing or outsourcing opportunities valued at roughly INR 75 crores to INR 100 crores more, across various phases, which could come online next year, the year after, and so forth. And these, as of now, are specifically our cage-related opportunities.
And sir, this isn't the big one, since from what I gather there was a big Cage. It's the same one — the big Cages contract, big Cages. And you'd also announced another one in the Bushing as well, where we were expecting the ramp-up to begin in this year's second half. So perhaps you could give us more perspective on that, first. Second, in one of the MNC calls we probably heard that for bigger wind turbines beyond, say, 5 megawatt, or maybe, say, 8 or 10 megawatts, in that case the requirement will lean more toward specialized bearings and call for relatively more developed Cages, and the Bushings may not be needed. So if you could shed some more clarity on this too.
Regarding the Bushing, I believe we had announced one contract and were anticipating commercialization to start in the second half. At present, we remain hopeful that this will take place. We believe it is somewhat delayed, and in terms of ramp-up as well, but it will still occur. And when it comes to the large windmill market, yes, we do see Bushing opportunities there. We view that as an ongoing opportunity. As I mentioned, it is not a matter of 100% replacing bearings. The Bushings are used only in limited applications. So I think our customers are correct that they would have many of these opportunities on the bearing side. But at the same time, we see that Bushing must play its own role with reference to large windmills. And we are already a supplier to a 16-megawatt windmill application, in fact. We are supplying Bushings in that application. So we do not see that as a concern. And as the rollout of Bushing proceeds, it will grow.
Our following question is from Prolin Nandu at Edelweiss Public Alternatives.
I've just got a single question about the China business. You said growth is a bit on the lower side and that margins are in the single digit as well. Now, looking back historically at your top line growth, it has fallen anywhere between 8% and 10%, and margins have also been in double digits. So when you said you expect some improvement going forward, will that improvement be limited, or will it only arrive once the new capacity comes? Or do you see sales as well as margin improving without the new capacity kicking in, or before it does?
We do anticipate that growth will keep going in China, even though—as we said—growth has eased somewhat compared with the prior quarter and last year. Still, we expect growth to persist, though pinning down an exact figure with full clarity is hard. A larger step up in growth will arrive once the new capacity is brought online. Apart from that, through the current financial year and the early portion of the next one, what we generally expect is the single-digit range.
Our following question is from Jason Soans at IDBI Capital.
I realize I'm asking this again, and I understand. But honestly, someone earlier in the call brought this up too. So there's 21% growth in the first half. Yet you mentioned guidance for consolidated revenue of 10%, 12% — that really suggests a notable deceleration in the second half. So just some clarity on why that would be, because you began the year really strongly, and things are going really well. So what's making us take this kind of conservative stance?
Jason, let me say it again. We're not suggesting that you're attempting to comprehend. What we're saying is that two elements exist. The first is the quantitative piece, and the second is inflation. Then Romania is the third angle. So overall metal prices have risen quite sharply this year. And both Vishal and Maulik have laid out that quantitatively, we're speaking of 12% to 15% growth. Given continued inflation, that will definitely — it could turn into a somewhat higher — definitely a higher figure as a combined value. That said, please understand we've also announced that we're looking at downsizing Romania. We don't know exactly how and when we'll be able to do it, but probably by Q3, we'll be very clear on what the nuances of the downsizing are. So Romania's contribution can come down quite a bit. So overall, please understand that for India Engineering, we're gung-ho, we're very clear there should be no issue. And so, from that angle, please view it as somewhat more conservative guidance. That's all.
Varun Jain from Dolat Capital has the next question.
Yes, sir. Most of what I wanted to ask has already been covered. So I have just a few follow-ups. In Q2 FY '27, for the foreign business, we saw 1% growth. So given the price increase, we had volume degrowth in Romania as well as China, correct?
Let me put it another way, Varun: we're seeing solid growth in India, and because of that, exports show up as a smaller growth rate in percentage terms. That said, on an absolute basis, exports are growing too.
So growth did occur.
Yes.
But sir, overall revenue is up just 1%. So did we kind of shrink—did export realization prices fall?
No, since China had a somewhat slow quarter, as we mentioned. Apart from that, what we're seeing is that those figures look solid.
Right, of course. And on the whole, China stood at INR 120 crores in FY '26 — roughly that figure last year. So for this year, we'll come in around INR 150 crores, or...
Since this is INR currency, part of the growth in INR also comes from the exchange rate effect. On the volume side, though, what we see is that, as of now in China, we've provided guidance of single-digit growth on volumes.
Varun, to build on what Maulik mentioned, on a year-over-year basis for the second quarter, exports grew by nearly 15%. That's INR 123 crores rising to INR 140 crores. And for H1 versus H1, it's again roughly 17%, 18%. So export growth out of India is continuing. On the whole, since China and Romania are combined, it feels flat.
Understood, sir. And sir, you mentioned that roughly INR 150 crores of CapEx remains over the coming 15 months or so. So within that INR 150 crores — the amount still left — how much relates to China, and how much to Advantek.
I don’t have that available right now. Combined, the two total 220, but yes, as of now I don’t have it on hand.
All right. And because we were planning to front-load the CapEx, so if we assume it only comes by June '27, then FY '28 would see the benefit from this CapEx, correct? China will come on. So in that case, what would China growth be like?
On commercialization, though — again, we'll follow similar timelines, which we've shared, Varun, since customer approval schedules will govern things. So even though the CapEx will be finished, commercialization won't happen until around the close of H1.
So essentially, the China CapEx is going to matter primarily in FY '29 rather than FY '28, is that correct?
H2 is going to be part of this.
The second half of next year.
In H2, that'll come into play, and we'll provide improved guidance close to the end of the year and completion.
Understood, sir. And sir, over the past 2 quarters, you've consistently said you expect 10% growth in Japan. Yet when I look at H1, growth with the Japanese customer was 28%. So has anything shifted when it comes to product acceptance — what's behind that?
Yeah, we’re seeing an improved product. As I’ve said before, a few of our projects had been delayed. They’re now coming online, and that’s lifting this relative percentage. So that’s broadly what’s happening, and on top of that, our customers—when we factor that in—I think they’re growing in the U.S. as well. When we refer to these customers as Japan-based, that also covers cases where we’re supplying them in the U.S. So all those geographies are improving too, and that affects that figure.
All right, sir, of course. There's one item I neglected to ask about, sir, regarding the CapEx for China and Advantek — what were the asset terms on that? Would it be the usual 1 to 1.2x asset terms, or does the Advantek CapEx carry a higher figure?
In either case, taking out the immovables would put us above two. If we strip out the immovable portion, since both plants carry removable spend, that helps. We've already gone over this on an earlier call.
The baseline infrastructure capital expenditure stays the same for, let's say, the coming few years. So when you consider the additional project-specific CapEx on productive assets — things such as civil works plus plant machinery, and so on — in connection with that CapEx, roughly 2x is what should be expected.
Of course, sir, of course. And just one final question. So regarding Stamping, sir, what kind of margins are we achieving, particularly on these accumulated products, given how quickly that business is expanding? Is it? How much below the core Cages margin does it sit?
That's not something we disclose. As you know.
Our next question is from Saket Kapoor at Kapoor Company.
If we look purely at the quarter-on-quarter expansion in EBITDA margin, is some of that coming from the RM benefit as well? Or would you attribute the consolidated improvement from 15.9% to 18.6% in EBITDA margin to product mix?
Saket, it's both of those, and on top of that — not just both — I'd say operational efficiency played a part too. And at an overall level, solar's contribution is lower for the month, on the cost side as well as on the revenue side. So all four of those factors contributed there — as the primary factors, I'd say, contributed there to the EBITDA growth.
Alright, sir — bearing in mind H2, since I came in a little late, so this may repeat something, roughly what range should we expect for the margin trajectory?
For India, we anticipate the EBITDA margin profile will stay at roughly 22%. And for the Engineering business at a consolidated level, we also expect it to hold in the range of about 17% to 18%.
All right, so on the consolidated basis, the figure we showed was 18.6% for all goods — does that also apply to the second half?
At this point, yes—assuming metal prices and the other factors we've already gone over stay where they are.
Ladies and gentlemen, that brings us to the end of the question-and-answer session for today. At this point, I'd like to turn the conference back over to Mr. Vishal Rangwala, who will offer some closing remarks.
Okay, great. Thanks a lot. I really appreciate everyone staying so late to join this call, and many thanks for taking part.
We wish everyone a happy Diwali, and here’s to a great year ahead.
Thank you, sir. Thank you. Ladies and gentlemen, that brings us to the end of this conference call on behalf of Harsha Engineers International Limited. We appreciate your participation, and you can go ahead and disconnect your lines now.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Harsha Engineers International Limited transcript - plus 131,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Harsha Engineers International Limited earnings transcripts and 131,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.