Hua Hong Grace Semiconductor Limited (1347) Earnings Call Transcript
August 13, 2026
Earnings Call Speaker Segments
Ladies and gentlemen, thank you for standing by. Welcome to the Hua Hong Grace Semiconductor Second Quarter 2026 Earnings Conference Call. Dr. Peng Bai, Chairman and President, and Mr. Daniel Wang, Executive Vice President and Chief Financial Officer, are hosting today's call. Please be advised that your dial-ins are in a listen-only mode. However, at the conclusions of the management presentation, there will be a question-and-answer session, at which time you'll receive instructions on how to participate. The earnings press release and Second Quarter 2026 summary slides are available to download at our company's website, www.huahonggrace.com. Without further ado, I'd like to introduce you to Mr. Daniel Wang, Executive Vice President and Chief Financial Officer. Thank you.
Good afternoon, everyone, and thanks for being with us on our earnings conference for Q2 2026. We'll start today with Dr. Peng Bai, our Chairman and President, who will give an overview of how we performed in the second quarter. After that, I'll walk you through the financial results in detail and then provide guidance for the quarter ahead. Following that, we'll open the floor for a question-and-answer session. With that said, I'll hand the call over to Dr. Bai.
Thank you, Daniel. Good afternoon, everyone, and thanks for being on our earnings call. In the second quarter of 2026, we kept making progress on operational performance, and profitability strengthened further. Revenue reached a record high of US$717 million, which is a year-on-year rise of 26.8%. Gross margin came in at 16.5%, an increase of 5.6 percentage points year-on-year. Both figures exceeded guidance and grew sequentially. Net profit attributable to shareholders of the parent company was US$38.6 million, with substantial growth both year-on-year and quarter-on-quarter. Hua Hong Grace sustained a high fab utilization rate in Q2 and delivered growth across all process technology platforms, particularly the standalone and embedded non-volatile memory products. Rising volumes and prices drove the improved business performance. Since the start of the year, the global semiconductor industry has seen a strong AI-driven upturn in demand, first on memory IC products, then spreading to logic and analog IC products tied to AI applications. As a specialty technology foundry serving a broad marketplace, we have clearly seen the AI wave's overall positive impact on our business. We have also seen diverging intensity and strength of market demand, depending on end-user market segments. Amid this rapidly evolving industry landscape, our strategy of steady capacity expansion, ongoing specialty technology upgrades, and continuous capacity product mix optimization will let us capture growth opportunity to deliver substantial improvement in our business results.
Hua Hong Grace just received registration approval from the China Securities Regulatory Commission for our purchase of Huali Microelectronics. Bringing the acquired asset into Hua Hong Grace will bolster our technology portfolio, boost our operational economy of scale, and enhance our profitability, giving our future growth new momentum. At this point, I'd like to turn the call over to our CFO, Mr. Daniel Wang, for his remarks. Daniel?
Thank you, Dr. Bai, for those truly motivating comments. Let me now take you through a summary of how we performed financially in the second quarter, and after that I'll give our outlook on revenue and margins for Q3 2026, before we open things up for the question-and-answer session. To start, let's go over the financial results we posted for the second quarter. Revenue came in at an all-time high of $717.5 million, which is 26.8% higher than Q2 2025 and 8.6% above Q1 2026, with the main drivers being greater wafer shipment and a better average selling price. Gross margin stood at 16.5%, up 5.6 percentage points from Q2 2025 and 3.5 percentage points higher than Q1 2026, chiefly because of an improved average selling price along with cost-reduction efforts, partly offset by higher depreciation costs. Operating expenses totaled $109.1 million, up 11.4% from Q2 2025 and 3.3% from Q1 2026, largely as a result of greater labor expenses. Other income, net, amounted to $2.2 million, a decline of 79.4% versus Q2 2025, mainly reflecting higher finance costs and lower government subsidies, partly offset by a larger share of profit of associates. The other net loss, net was $2.4 million, primarily attributable to a bigger share of profit of associates. Income tax expenses came to $7.6 million, 7.5% above Q2 2025. Profit for the period was $3.9 million, versus a loss of $32.8 million in Q2 2025 and a loss of $17.3 million in Q1 2026.
Net profit attributable to shareholders of the parent company came in at $38.6 million, which is 385.9% over Q2 2025 and 84.6% above Q1 2026. Basic earnings per share was 0.022, or 2.2 cents, 340% over Q2 2025 and 83.3% above Q1 2026. Annualized ROE was 2.4%, 2 percentage points over Q2 2025 and 1.2 percentage points above Q1 2026. Now let's take a closer look at how our revenue performed in Q2 2026. From a geographical perspective, revenue from China was $563.7 million, contributing 78.6% of total revenue and an increase of 20% over Q2 2025, mainly driven by increased demand for MCU, flash, general MOSFET, logic, and smart card ICs. Revenue from North America was $93.8 million, an increase of 77% over Q2 2025, mainly driven by increased demand for other power management IC and MCU products. Revenue from other Asia was $32 million, an increase of 11.6% over Q2 2025, mainly driven by increased demand for superjunction and MCU products. Revenue from Europe was $28 million, an increase of 90.1% over Q2 2025, mainly driven by increased demand for MCU and smart card ICs. With respect to technology platforms, revenue from embedded non-volatile memory was $200.1 million, an increase of 41.8% over Q2 2025, mainly driven by increased demand for MCU and smart card ICs.
Standalone non-volatile memory brought in $68.8 million, up 149.3% versus Q2 2025, with the main driver being stronger demand for flash products. Power discrete revenue came to $182.3 million, a rise of 9.4% compared with Q2 2025, primarily on greater demand for general MOSFET products. Logic and RF generated $83.2 million, which is $21.3 million, or 21.3%, higher than Q2 2025, chiefly because demand for logic products grew. Analog and power management IC revenue reached $183.1 million, 13% above Q2 2025, mainly as demand rose for other power management IC products. Moving now to the cash flow statement, operating activities produced net cash flows of $330.1 million, which is 99.3% over Q2 2025 and 159.2% above Q1 2026, largely thanks to higher receipts from customers. Capital expenditures totaled $356.6 million in Q2 2026, comprising $325.9 million for the 12 for the 12-inch facilities and $30.7 million for the 8-inch facilities. Other cash flow generated from investing activities amounted to $25.4 million in Q2 2026, made up of a $25.4 million receipt of government grants for equipment, $8.6 million in interest income, $7.3 million in dividends, and $0.2 million in receipts from the disposal of equipment, partly offset by a $16.1 million investment in equity instruments.
For financing activities, net cash used came to $406 million. That figure includes $569 million in bank principal repayments, $37.6 million of interest payments, and $1 million in lease payments, partly offset by $201.5 million in proceeds on bank borrowings and $100,000 in proceeds from share option exercise. Turning next to the balance sheet, cash and cash equivalents stood at $4,530 million on June 30th, 2026, versus $4,867.9 million on March 31st, 2026. Other current assets rose to $936.2 million on June 30th, 2026, from $894.6 million on March 31st, 2026, largely because of a higher prepaid value-added tax. Property, plant, and equipment came in at $7,286.3 million on June 30th, 2026, against $7,105.9 million on March 31st, 2026, mainly reflecting capacity expansion. Interest-bearing bank borrowings went from $2,897.2 million on March 31st, 2026, down to $3,567.5 million on June 30th, 2026, chiefly as a result of bank borrowing repayments. Total assets grew to $15,225.8 million on June 30th, 2026, from $14,947.3 million on March 31st, 2026. Total liabilities fell to $5,528.4 million on June 30th, 2026, from $5,663 million on March 31st, 2026. The debt ratio declined to 36.3% on June 30th, 2026, from 37.9% on 31 March 31, 2026. Lastly, let's go over our outlook for the third quarter of 2026.
Our revenue outlook is $770 million to $780 million, and we're projecting a gross margin of 16% to 18%. That wraps up my financial comments. At this point we'll move into the Q&A portion. Operator, please help us get started. Thank you.
Thanks. We’re moving into the Q&A portion now. If you want to pose a question, press * 1 and 1 on your phone and hold until your name is called. If you need to withdraw your request, press * 1 and 1 once more. The first question is from Leping Huang at Huatai. Please go ahead—your line is open.
Oh, thanks for the question. Dr. Bai, first of all, congratulations on the very strong results. From my calculations, you delivered another 3% Q-on-Q ASP growth this quarter. Could you break down what's driving that ASP growth and whether it comes from pricing or some mix change? How do you see this ASP trend in the second half and beyond? Also, we noticed that the largest foundry in the world now also says they were re-emphasizing this mature and specialty node process to serve their customers. Plus the domestic peer also wants to add capacity. What's your view? On this mature node supply-demand relation in the next few years, and how can Hua Hong differentiate from peers and further improve profitability ahead? Thank you.
Thanks. There are several questions in there, so let me try to break them apart and address each one. On pricing: in our industry, the market sets pricing. It comes down essentially to how supply and demand balance out. From the start of the year, we began noticing demand rising, and the balance is tilting toward a tight supply situation. Because of that, price increases have been pushed up, mainly in MCU and the memory area, and PMIC area. Those areas are the ones tied more closely to AI applications. They do get used in the consumer segment as well, of course, but the upturn in AI demand is probably more significant. That is why we see the supply-demand balance shifting toward demand supply being tight. In fact, with some products, we clearly cannot meet demand. The orders we are receiving run anywhere between 1.5x to 2x of our capacity. So we are doing everything we can to essentially optimize our capacity structure and try to produce more across the board, which is somewhat difficult right now, because we are pretty much 100% loaded.
It really comes down to a lot of hard work and innovation, trying to squeeze out more. Naturally, we've been fortunate to have a fab that was still in the middle of its capacity expansion, and that's the reason we're still able to achieve a solid capacity increase from Fab 9A, which continues to go through its capacity ramp-up. In a sense, if you ask me where our advantage lies, with Hua Hong's advantage, I'd say it shows up in two ways. First is our technology capability. From a domestic perspective, it's clearly industry-leading across many, many areas. Several of them are also on par with our international competitors. That gives us a strong foundation on which to build our capacity and serve our customers. The other thing is that since last year — though last year nobody predicted this year would go up — since last year we were also quite steady, and we were quite determined to keep increasing our capacity. That decision, or that strategy of steadily expanding our capacity, actually, you could say, has paid off somewhat as this year has come in and the market is turning upward.
When it comes to predicting pricing going forward, it really depends on this most recent surge in demand and how long that surge will endure. That is an open question. Industry folks are discussing and debating it a great deal. Near term, I think for the second half of this year and also 2027, most people still believe demand will stay strong. I share that view, so in that sense, I expect our price increases to continue through the second half of the year. Some of the pricing action we've taken over the past quarter will probably begin to show up in the second half and even next year. I do think this upside, this upturn in demand, will come alongside our continued ability to raise the price a little bit. I do want to caution everybody that we are not like a DRAM market, where there is a multiple increase in percentage terms. I do think it is a nice turn for the better, and we should keep enjoying that for the foreseeable future, at least through the second half of this year and perhaps into next year.
Thank you.
My second question concerns memory. A major DRAM player headquartered in China has only recently gone public on the A-share market, and investor enthusiasm for the country's memory sector looks quite strong to us. Meanwhile, from a worldwide standpoint, offering logic die foundry work to memory manufacturers has emerged as a new pattern lately. Dr. Bai, could you tell us how Hua Hong might gain from this memory expansion both in China and around the world, and do you have any thoughts on whether you intend, say, to work with Chinese or global memory producers in delivering that kind of logic die service? Thank you.
Alright. Memory shows up in a few different forms. DRAM is where you're witnessing the largest surge in demand. NAND comes next. We don't take part in DRAM or NAND directly, though we hold a sizable position in the NOR flash business, where demand has risen this year, and that will likely keep going through the second half of this year and into next year. We are certainly benefiting from that pickup in demand. Regarding the memory market climbing, I think it truly reflects growing overall demand for semiconductors. In that sense, it clearly helps everyone. It helps memory more directly, since things probably ramp up faster there. It also helps a logic foundry — I'd describe us as a specialty technology foundry, with plenty of product in logic, analog, and certain specialty memory such as NOR flash. In a way, DRAM seeing the largest demand gain really just shows that AI has been fueling a great deal of the demand growth across the semiconductor sector overall. In that sense, it's certainly a positive thing. We do gain from the broader rise in semiconductor demand.
When it comes to DRAM or even NAND specifically, the technology roadmap there is pushing them to split the memory array from the peripheral logic onto two separate die, and then join them together into one product through some form of 3D assembly. So if the memory companies want to devote more time or attention to the pure memory array itself, they may hand off their logic — the peripheral logic die — to a logic foundry to build. In that light, we do expect the logic players will likely begin exploring that kind of collaboration with the logic foundry, so they can concentrate on what is genuinely their specialty, namely the memory portion of the overall memory product. That is, I think, still at an early point in this technology transition. Broadly speaking, things are heading in a direction where they could even generate some fresh demand for logic foundries, since the logic part of their monolithic die might be carved out onto a separate die and handed to a logic foundry to manufacture. Hopefully that came across clearly. Thank you.
Thanks. That’s very clear. Thank you, Dr. Bai.
Appreciate the questions. Give us a second while we line up the next ones. Ziyuan Wang from CITIC Securities is up next. Your line is open, so please go ahead.
Thanks for taking my question. Ziyuan here, from Zhongxin Zhengquan. First question: guidance looks strong and points to solid growth in Q3. Could you break out the Q3 revenue guidance to show what portion comes from ASP increases and what portion comes from capacity expansion? And on expansion, roughly how much capacity gets added in Q3 and in Q4? Thank you.
Okay, I'll handle the capacity expansion section first, and after that I'll hand things over to Daniel so he can address the Q3 guidance question — specifically how it splits between volume growth and price increases, since that's what he was asking about. On the capacity side: Fab 9A in Wuxi is going to ramp to its full capacity during Q3, which is the upcoming quarter. All of the equipment in that fab will be installed. We'll begin loading that fab at 100% starting in Q3, though the output likely won't begin to appear until Q4 or next year. In 2027, you should expect output equivalent to a full fab from Fab 9A. We also have a second fab under construction, which broke ground in March of this year. Equipment installation at that fab will likewise begin in Q3. We anticipate having a complete line in Q1, and we'll begin producing a small volume. Next year, across 2027, we expect to begin ramping capacity at that next fab, which we refer to as Fab 9B. Now I'll turn it over to Daniel to cover the Q3 revenue breakdown — the guidance split between volume and price increases.
Hi Ziyuan, thanks for asking. Our expectation is revenue will land somewhere between $770 million and $780 million — that's $7.7 to $7.8 hundred million, give or take — and that figure is what we're projecting for Q3. Most of that lift is driven by MCUs. Embedded non-volatile memory as a whole should keep growing at a solid clip, with double-digit growth. Standalone non-volatile memory stays very, very strong in Q3, and my sense is that this trend carries on through the rest of the year and into 2027 too. On power discrete, particularly the low-voltage products — meaning the MOSFET business — plus the medium-voltage products, those are going strong as well. IGBT and superjunction are basically flat. Turning to logic and RF, I'd say RF should deliver pretty strong momentum too. Beyond that, we're seeing solid momentum out of power management IC and the analog business as well, even though analog remains a small segment at this point, but those are growing quite strongly in Q3 too. Overall, looking at technology platforms, what I just walked through are the main drivers. On the revenue increase, when you break it down by ASP and volume, it's really a split — I'd say of the roughly 7%-8% increase in revenue we're looking at, about 60% comes from ASP and the other 40% comes from higher volume.
Thanks.
Thanks. Hello, Dr. Bai and Wang Zong. For my second question, I’d like to ask about switching or transferring capacity. Given that demand is strong, could we move capacity between products in a flexible way? Is it possible to shift CIS capacity over to memory products? What kinds of capacity permit that sort of conversion? And what effect would a conversion like that have on overall ASP, perhaps in the next quarter or in the second half? Thank you.
Capacity is somewhat fungible, at least to a degree. The point is that capacity is fungible: if you build 1,000 units of capacity for a particular technology platform, then with some conversion rate, that capacity can be used for something else. There is a certain amount of fungibility. How much exactly depends on which technology platform you mean. Take CIS specifically: its flow is close, quite close, to the logic flow. If you aim for fungibility with a technology platform that is near the logic flow, then a great many of those can be put to use. For instance, we usually place logic products, CIS, and driver-type products together in one group, since they are largely mutually fungible to a substantial degree. If you want to use CIS for a BCD-type product, some fungibility remains, but it will be reduced. Or if you want to use it for a memory product, there is likewise some fungibility, though it is probably reduced further still, because certain memory products have some unique tool requirements. Very often, your fungibility is constrained by those unique tools that are specific to each technology platform. When we build a fab, we try to manage fungibility. Obviously, you cannot be 100% fungible.
Our aim is to make things as interchangeable as possible, so we can respond to shifts in market demand across the various technology platforms. At this moment, we are definitely using that interchangeability to the fullest degree. This is, naturally, also constrained by the fact that we still want to keep a sensible volume for every product, since we are in this for the long term. We don't want to essentially focus on the next quarter or even merely one year. There is a certain amount of strategic decision-making taking place to ensure we do hold a long-term view, rather than being 100% pushed by short-term factors. That's one point. The other is that we do employ pricing as a tool to help manage the shift in demand between technology platforms, so that the demand pattern fits our capacity pattern better. Yeah. On the whole, I think when overall demand is tight, in general, we succeeded in raising prices across the board, some more than others. Thank you.
That's very clear. Thank you, Dr. Bai.
Just a moment while we bring in the next questions. Our next questions come from Ziye at Guosen Securities, whose line is open. Please go ahead.
Thanks for taking my questions. This is Yezi from Guoxing Zhengquan. My first question is on consumer electronics demand. Higher memory prices could put pressure on demand for consumer parts, yet we still see Hua Hong delivering sequential growth in consumer parts. How do you see our consumer-related parts growing in the second half of the year? That's the first question. Thank you.
That is genuinely a solid question. Honestly, at the start of this year, once it became widely understood that products tied to AI carry strong demand, one more topic was being talked about across the industry: the idea that as DRAM moves on pricing, it will likely weigh on consumer demand, and that is probably accurate in certain end-market segments, cell phone being one example. Plainly, a decline is going to be seen there this year. We had actually been anticipating perhaps some drop in demand within the consumer segment. As for Hua Hong, like I mentioned, we operate as a broad foundry serving every kind of market segment, and I think we were somewhat surprised that we truly did not observe as large a negative effect from the demand decline in some consumer end-markets. That may stem from the fact that, being a foundry, our direct customers are design houses, and via them those IC products reach various end-market segments. Since we do not supply the end-market directly, perhaps our direct customers are managing well across the different end-markets. That is one possibility. That is the reason we are not seeing a large negative effect from the consumer end-market. One more possibility, also plausible, is that even if the short-term end-market may see demand fall somewhat, they still want a certain inventory level in order to build up inventory ahead of what is probably an unavoidable upturn down the road.
So those are the 2 possibilities. What it nets out to is that demand is strong across every AI-related product, and at the foundry level we haven't observed much of a negative effect from the consumer market. A third possibility might involve our product and our technology — as I mentioned before, we're quite strong on technology. It could be that if you sit at the low end of the market — which isn't where we are, since we're mostly in the mid and high-end market — perhaps the low-end market is experiencing a more negative impact. Thank you.
Thanks. For my next question, I'd like to ask about how the acquisition is coming along. Can you give us an update on where things stand, and also on the technology road map following the acquisition? Thank you.
We've already updated everyone in the statement that we received final approval from the exchange to proceed. We anticipate that this last step in the lengthy acquisition process will occur probably within a month. Once that happens, the entire transaction is complete and finished. On the second part of your question, I probably didn't quite catch it. We do expect this acquisition to be a very positive one for our financial statement. As soon as the final steps are completed, Huali Micro's results will be included in our financial results. If there are no surprises, the Q3 statement will include Huali Micro. Did I answer your question?
And I’ve got one more quick question, if that’s okay. What does the technology road map look like following the acquisition? Yeah.
When you look at what Huali Micro does, there's a lot of synergy with what we have at Hua Hong Grace. We genuinely get a fair amount of savings and a fair amount of synergy when it comes to sharing technology. Put another way, some of the technology development we used to do at Hua Hong Grace or previously at Huali Micro can now be combined, and basically for every R&D dollar we spend, we get a larger manufacturing scale. That benefits us when it comes to improving efficiency. Another way it helps is that we now have one more fab, so for a given technology platform our manufacturing scale is effectively virtually larger, and we can take on more customers who need bigger capacity than we previously might have struggled with if we just had two separate entities. Huali Micro especially, on its own, is not large. That's another benefit. The third benefit is that now that Huali Micro has joined Hua Hong Grace and the overall manufacturing system, we can optimize the capacity structure, such as which kind of technology platform goes where, which gives us a better ability to respond to changing market demand. Especially right now, because of the short supply, we can immediately start some of the technology platforms that we cannot supply in Wuxi, for example, and put them in Huali Micro.
Broadly speaking, what you're seeing is largely a result of the larger scale, the R&D savings, and generally better efficiency stemming from that big scale. And on procurement as well, we now have greater volume too. Basically, everything is positive. We believe this is going to be a very, very — it has proven to be a very good step for us to take. Thank you.
Thank you, Dr. Bai. That covers everything from my side.
Questions. Please wait for our upcoming questions. Our following questions will be from Qingyuan Lin at Sanford C. Bernstein. You may proceed.
Appreciate you taking my question. Dr. Bai and Daniel, congratulations on the strong earnings results. I'd like to ask from two directions. The first concerns expanding capacity down the road. Dr. Bai, how do you see demand holding up for '27 and '28? You said it was fairly clear for the second half, but I'm curious whether we should expect this cycle to keep getting stronger over the next few years as well. You noted that last year there was a sound decision to keep expanding capacity. Given this robust demand, do we still see that we may need to speed up capacity expansion further, even for '27 and '28? That kind of leads to a question for Daniel, I suppose: do we have any plans to ramp up our CapEx further? That's my first question. Thank you.
Right, so on capacity expansion — we definitely intend to keep growing capacity at a steady pace. That way we can manage CapEx spending while still holding on to the profitability we've worked a long way to establish at this point. I do think — as I said earlier — in the second half of the year, everyone sees short-term market demand as strong, and for 2027 the consensus is strong as well. 2028 is the year where people begin to have some debate. It's probably a little too early to say for 2028, but I do think the overall secular trend — I do see a secular growth story in the marketplace we participate in, which is specialty technology. So in that sense, that's the reason it gives us confidence that we'll keep expanding capacity. This overall increase in demand is based on new applications of the semiconductor, and also on the fact that some industry players may begin shutting down some of their 8-inch fabs. We do have three 8-inch fabs, so we also benefit from some of that industry capacity going offline.
When it comes to 12-inch, the picture is different — on the demand side, most of the growth is on 12-inch. On supply, no one is adding 8-inch capacity, so 8-inch supply could actually shrink. For 12-inch, though, demand will likely keep rising. Our approach of steadily adding capacity rests on our confidence that the market, despite some fluctuation, is still headed upward overall. That confidence also comes from a second factor: we believe our technical capability relative to our competitors in the industry will strengthen as we move forward, since we have the scale, the people, the track record, and the position in China and now even worldwide, so we think our capability will improve. We're not afraid even if a downturn arrives. I think we will still keep growing and steadily keep adding capacity. Thank you.
Thanks. Daniel, do you have anything to say about the CapEx guidance or any kind of projection for the next few years?
So I’d say we began building our third 12-inch fab earlier this year, and over the next three years that fab will ramp to 55,000 wafers of capacity. All in, CapEx comes to roughly $6 billion. I’d put it at about $2 billion annually across the next three years. Beyond that, unless we decide to construct additional new fabs, this will be the main CapEx outlay.
One quick note on that: the $6 billion isn't entirely CapEx — it's likely under $2 billion annually, around $1.5-ish, yeah. Over
Three years — that's the span, yes. Over a three-year period, correct.
Understood—that's very clear. For my second question, on the earnings side: we specifically note roughly $25 million in receipts tied to government grants for equipment. Could you give me a bit more detail on that? The prior occasion we flagged it was Q4 '25, at approximately $37 billion. This ties into what I asked about the plan for the 9B: what portion is local equipment? Do we expect that share to rise, and at what kind of level should we anticipate it? Thank you.
That was actually a subsidy grant we received — it wasn't in Wuxi, it was really for Shanghai. That's the grant we got here from the local government in Q2. As for the Wuxi portion, most likely it will be paid, I think, in Q4 — part of it in Q4, in Q4 2026.
On your second point regarding domestic equipment, I believe China's domestic equipment sector has been strengthening year over year. As a general trend, we do expect that newer fabs will carry a higher percentage of domestic equipment.
That's very clear. Thanks a lot.
Appreciate it.
Thank you for those questions. We now have a question from Lin Tuoni at Daiwa Securities. Your line is open, so please go ahead.
Thanks. Hey, I appreciate you taking my question, and congratulations on the strong execution. May I ask what your present lead time is for products across the various technology platforms, and also which segment is growing and which one is shrinking? Thank you.
Apologies — the lead time in
The lead time for manufacturing.
And what's the total time needed to get a wafer through the whole process, from beginning to end?
Right, exactly. That's for delivering to your clients.
Oh, okay. That clearly hinges on which technology platform you're dealing with. Certain process flows take longer, while others are shorter. Take discrete power devices — those don't involve too many steps, and if we speed things up, you can have them in a couple of weeks. Meanwhile, certain MCU products carry 50, 60, or 30, 40 mask layers, and accelerating those would still mean two months. How quickly a wafer travels through a fab also depends on loading. When a fab is very heavily loaded, you essentially face longer queue times ahead of the equipment, so the average speed ends up slower. We also typically manage things in the fab by maintaining different tiers of speed. For items such as NTO — the first time you have a new product — we try to assign high priority so they can zip through the fab very fast. When it comes to volume production, we tend to maximize output versus speed, and nothing takes more than a quarter, I would say. The faster ones can be a month or two months, really depend on the type of products you have.
Okay, thanks. Has anything shifted on lead time — meaning the stretch from when the order comes in to when the product ships? Any changes there at all? Just trying to get a handle on it. Yeah. No,
Not much has changed on that front. Whenever demand tightens up — when it's high and supply is constrained — one consequence is that lead times tend to stretch a bit. That's something we sort out together with our customers. Basically, at the point an order is placed, we normally commit to a delivery window. If the customer is fine with that and it meets their needs, we go ahead. That's how the process works. And if something is needed urgently, we can accommodate that too. Not 100% of the time, but a certain percentage of the wafer can be turned around really quickly when necessary.
Got it — that's very clear, thanks. Moving on, my next question concerns how we plan to invest. As I recall, Dr. Bai referenced CapEx of $1.5 billion USD annually. Over the next two to three years, which technology platform will receive the greater share of our focus? Thank you.
That brings us back to what we concentrate on. Our company's emphasis is specialty technology. When you examine specialty technology, it's heavily application-driven—we follow wherever the market happens to be, so to speak. The rationale behind having those four or five sizable technology platforms is that there's substantial market demand for them, such as BCD for PMIC, power management; power devices for everything electric and much that's power-related; MCU, microcontroller—these days plenty of AI-related applications need a microcontroller; or even automotive, the new EVs, which contain a lot of microcontrollers; and CIS has been present ever since cell phones grew into a large application that propelled a great deal of CIS, the image sensor. At present CIS is additionally propelled by certain security requirements, and even automotive, the new EVs, the autonomous driving car, or robots, for that matter—some emerging applications will propel plenty of that. There's no brief answer to your question, but on the whole, we examined every specialty technology we take part in, we examine where demand runs high, and combined with where our strength lies, like MCU, we're historically very strong in MCU, that's also a growth area, we're going to put a lot of, for instance, we're going to put a lot of capacity there.
BCD is another one. Broadly speaking, when you review our financials from the past few quarters, the strongest growth really comes from MCU, BCD, and even NOR flash — those are the areas we're going to invest more in. CIS and logic are also areas of significant interest for us, even though their growth rate hasn't matched the other two technology platforms — or the other three — but we're still trying to push them up and capture a bigger share there. For us, that could turn into a growth platform. Those are the areas where we're really directing capacity among the current technology platforms. Every technology platform, as time goes on, the technology itself evolves too, and MCU will likely move from 55-nanometer to 40-nanometer, and we'll follow along. We'll keep watching for where the sweet spot is in the market, and try to shape our technology road maps to go where the market is, and also to go where we believe we hold a competitive advantage. That's the complicated answer I'm giving you. It's somewhat complicated because by nature it is complicated. We devote a lot of time to those things to make sure we get it right so that we can achieve good growth.
That’s wonderful. Thank you very much.
Thanks for the questions. To save time, we’re going to take the final two questions now. Please keep your question short so that we can get to all of them. Our next question is from Tracy Cui at CLSA. Your line is open. Please go ahead.
Thanks, Dr. Bai, Daniel, and the senior management team, for this opportunity. My question is about depreciation. With Fab 9A ramping up and another new fab on the way, I'm wondering how much depreciation might be in the second half and also next year? Thank you.
Thanks for that, Tracy. If you look at the back half, on the whole, the 8-inch segment would come in at roughly $55 million, all right? I realize that will help with your model. Regarding our first 12-inch fab, depreciation expense will be approximately $250 million in the second half of 2026. As for the second fab, it'll be about $210 million — roughly $210 million — for the back half. Those are forecast figures. On the third fab, we're only just beginning; if anything shows up, it will be minimal for this year alone. Then for Huali Microelectronics, all right, we're expecting roughly $30 million in the second half, okay? At that fab, the depreciation expense is largely behind them. We're looking at somewhere around $50 million to $60 million annually, and it should begin falling even more in the coming few years.
Understood, thanks, Daniel. Turning to the new business: I believe on the prior earnings call you mentioned moving into interconnect solutions, including silicon photonics and interposer. I was wondering whether there is any brief update on how those efforts are progressing, and which particular area you view as having the stronger growth potential? Thank you.
Thanks for asking that. I need to choose my words carefully here. We're probably the biggest specialty foundry in China. We're even the number two foundry in China, but when it comes to specialty technology, as I mentioned earlier when responding to previous questions, we follow wherever the market is headed. On that point, sure, that's one element. A second element is that we also go toward places where we believe we possess strength or hold an edge. Combining those two things is what determines where we go. Regarding the part you brought up, there's — we see AI as unquestionably a growth driver, so anything tied to AI applications that also falls within the specialty technology space, we want to examine very closely and then decide whether — if we're already present there — we're already in plenty of those areas: the PMIC, the MCU I mentioned, the power devices, all of those are covered. There are a few, such as optoelectronics and silicon photonics, for instance, where we actually, in a sense, already have a presence, since some of our MCUs do go into the module that produces the final silicon photonics target.
We want to broaden our presence in that area, likely moving into additional kinds of silicon-based devices. That's because this is where our expertise lies. Yes, essentially we'll examine the application there and look at some of the chips inside — the optical ones, the silicon photonics module — to see. We already take part in certain of those chips within it. We aim to add a couple more on the IC side, silicon-based ICs. That remains the plan, and we're still at an early stage of carrying it out. Power devices are another area likely undergoing some technological or market transition; up to now they've been mostly silicon-based, and at present devices built on silicon carbide, for instance, have also become part of a power device offering. Again, if you look at a module there, the product tends to contain silicon-based devices and, increasingly, silicon carbide. This is something we'll have to examine if we wish to keep going in the power device area. We have no choice but to look at whether we can offer something more complete. We are definitely doing planning — a great deal of planning.
We do have a few things to pull together before we can officially say we’re in there. We are not slowing down. We’re moving forward. Thank you.
Understood—that’s quite clear. Thanks, Dr. Bai and Daniel. That’s everything from my side, so I’ll return to the queue. Thank you.
Thanks for the questions. With that, I’ll now take the final question from Kuai Jian at Orient Securities. Your line is open. Please go ahead.
Hello there, and good evening. Kuai Jian here, calling from Dongfang Zhengquan. Thanks to Dr. Bai and Daniel. My first question concerns the very strong growth in our revenue from North America and Europe. Could you share additional color on those two regions? Is it perhaps coming from server PMIC, or possibly MCU, or products of that kind? That is my first question.
North America's revenue — a big chunk of that sits in the BCD and PMIC space. Much of the product involved there is tied to AI server boxes. That explains why you're seeing such large gains, since it flows straight into AI. Turning to Europe, one big European firm has a China-for-China approach. Its products are mainly MCUs, smart cards, and a few power devices too. As that company carries out its China-for-China strategy, I think if we're the partner it picks — and in China we believe we are — that's why growth is showing up. We anticipate seeing additional growth out of Europe as well.
Thanks, Dr. Bai. My second question concerns equipment and materials. There's constant talk about equipment supply being very tight, and about material prices going up, that sort of thing. From our perspective, how do we view the supply of equipment and materials?
That's a great question. Equipment supply is becoming more constrained, since globally, semiconductor manufacturers everywhere are ramping up capacity. That applied to both our domestic and overseas suppliers. One sign of it is that lead times have grown longer. It remains at a manageable level, and on our side, we began the capacity expansion last year, so much of the equipment was already booked by us last year. We haven't experienced a major impact, though things are certainly getting tighter. We're working closely with our supplier partners to bring equipment lead times to a point where our overall capacity increase schedule isn't affected. So far, I believe we can largely achieve that. On materials, there are a few instances — due to the war in the Middle East or other factors — where we do see tightness and even price increases on some items, for example helium gases, which had a temporary spike because of the war there, but have now calmed down. Some metals too. Prices, partly from general inflation or partly from a supply situation — we do see some price increases in a few isolated areas, but overall the impact hasn't been significant.
Even so, we essentially held pricing level or reduced it, since the broader supplier marketplace remains fairly favorable for us. Thanks.
Thanks, Dr. Bai. That clears everything up for me. Those are all the questions I have.
Thank you, ladies and gentlemen. That brings us to the end of the time set aside for questions. I'll now return the call to Mr. Daniel Wang, who will offer some closing remarks.
That brings us to the end of today's call. Thank you once more, everyone, for being with us and for the thoughtful questions and contributions you provided. It was an exciting quarter. We hope to have you with us again on the next earnings call. Thank you.
Thank you.
Thank you for joining us, everyone. That wraps things up, so you're free to drop off the call now.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Hua Hong Grace Semiconductor Limited transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Hua Hong Grace Semiconductor Limited earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.