Johnson Matthey Plc (JMAT) Earnings Call Transcript
November 27, 2024
Earnings Call Speaker Segments
Okay, are we up and running? Yes. So, 9:00 A.M. Good morning, everybody. I'm Martin Dunwoody, Director of Investor Relations at Johnson Matthey. Thanks to all of you for joining us today, and to those who have tuned in via the webcast. A bit of housekeeping before we begin. If you have mobile devices, please turn them off or set them to silent. We'll follow the usual format today, with a presentation and then Q&A, and we'll take questions first from the room and then the webcast. And I'd say we're very pleased to welcome today Liam Condon, our CEO, and Stephen Oxley, our CFO. I'll point to our cautionary statement as usual. And with that, I'll hand over to Liam for the presentation.
Many thanks, Martin, and a very warm welcome to everyone here at the London Stock Exchange—and, naturally, a very warm welcome as well to all of you joining us online today. As Martin mentioned, I'll make a brief introduction, sharing a little about what's going on in our markets and what has been happening at JM over the past six months. Stephen will take you through the financials. I'll bring you up to date on our strategic progress, and then the bulk of the time will be open for Q&A, which we're very much looking forward to. So, diving straight in: what you saw in the results we published this morning, we believe, was a pretty resilient performance in the first half, and it was actually very much in line with our expectations. To be honest, this is the first time since I joined Johnson Matthey that we came in slightly ahead of our internal budget. So, just to frame it, this was very much in line with our internal expectations. A really important point: we have maintained our full-year outlook, which implies a strong second half. And together with Stephen, I'm going to explain to you why we have that confidence in the second half.
Obviously, the macroeconomic backdrop is quite difficult right now, but there are many elements within Johnson Matthey's control, and we'll discuss those and how they affect our results. Our ongoing transformation is one area squarely in our hands. Overall, we are turning into a more efficient organization. The advantages of that transformation show up in the first half in terms of savings, with more to come in the second half and also in the year that follows. So we'll spend a little time on that. We're making headway. For a company such as JM, which has existed for 207 years and holds a very strong purpose of catalyzing the net-zero transition, I believe it's really important that we're not just achieving operational progress. Making strides on the strategic front matters greatly as well. I'm pleased to report that we're doing very well on that front. Now, as I said, we talk a great deal internally about controlling the controllables and focusing, and we can't spend time complaining about everything that isn't breaking our way. We redouble our efforts and concentrate our energy on the things we can control.
Let me break that down a bit further. I'd add as well, speaking of Johnson Matthey, that this financial year really splits into two distinct halves. Two of our businesses, in my view, delivered strongly — very strongly, I'd say — during the first half, while two did not do so well, and I'll get into why. On the two that did well: if you consider the wider picture for Clean Air, the automotive backdrop, nobody, I think, would dispute that it's a tough one. Yet we've actually succeeded in lifting margin within Clean Air. Much of that stems from the transformation that's still underway. Considerable headway has also been made on securing new platforms. So here, Clean Air turned in a very robust performance. Catalyst Technologies is much the same — excellent margin improvement within a chemicals market that isn't precisely booming. Here, good, genuinely strong progress. We've likewise achieved meaningful gains on the manufacturing and operational efficiency front. And on top of that, we're landing some notable wins. A good, robust, very solid first half for both of these businesses, with more to come. Clean Air should keep that going through the second half. Catalyst Technologies, you can expect, will stay strong across the second half too.
When it comes to Catalyst Technologies, we'll keep expanding year on year. Two areas you didn't observe performing strongly were Platinum Group Metals and Hydrogen Technologies. So what should you anticipate going forward? A very strong second half is what you should anticipate for Platinum Group Metals. Multiple reasons sit behind that, and from a phasing standpoint this was built into our original budget. We anticipate, and have line of sight to, a significant uptick in volumes from a refining point of view. Thanks to our commercial excellence efforts, we've managed to replace a lot of the automotive scrap automotive catalyst scrap refining volumes, which have been somewhat depressed. We've managed to replace that with industrial feed, which is actually a higher margin product, which is actually on-site ready for refining now. This is something that we know is there, and it's something that we can lean into in the second half, so increased volumes on the refining side. We also have a very strong and growing life science technology products business for Platinum Group Metals, where from a seasonality point of view, vast majority of those sales come in our second half. There we have clear line of sight.
We also experienced planned shutdowns at our refineries during the first half, and because of that, metal recovery came in lower than it would have without those outages. So we're expecting higher metal recoveries in the second half. And there's a transformation efficiency initiative that's underway in Platinum Group Metals as well. So there are plenty of factors explaining why PGMs will be considerably stronger in the second half compared with the first half. And on Hydrogen Technologies, you saw a loss. This is still an investment business — a nascent investment business. You saw a loss of a magnitude similar to the prior year, but with lower sales. And naturally, those lower sales affect the size of the loss. So what you'll see going forward is a sequential improvement in that loss during the second half. That will become visible thanks to the restructuring and the cost measures we've already implemented in that business. So there's a lot to look forward to in the second half. And all of that sits against the backdrop of what we believe is a very disciplined approach to capital allocation. We said we would divest anything that's non-core.
Those divestments are now finished, and we got them done in a fairly brief period — fully complete. The cash return we received on those sales was very good. And as we promised shareholders, we told them that any excess cash would go back to them. So a GBP 250 million share buyback is currently underway — once again, we are delivering on what we committed to. And since certain parts of the net-zero transition, especially those tied to green hydrogen, have lost momentum, we are modifying our CapEx and changing our spending levels as we move forward. In the end, that should also affect, in a favorable way, how much cash we can generate. So all in all, there are plenty of reasons that hopefully make clear why our confidence in the second half is strong, and, with that, why we are keeping our guidance for the full year. Now, to walk you through the first half financials in greater detail, I will pass things to Stephen. And with that, Stephen, the floor is yours.
Thanks, Liam, and good morning, everyone. I'll begin with the main points. We've turned in a resilient performance despite difficult end markets. On a continuing basis, sales fell 3% and underlying operating profit dropped 4%, which was in line with what we expected. As Liam mentioned, we anticipate a stronger second half, with bigger transformation benefits and a stronger PGM Services, so our full-year guidance stays unchanged. Free cash flow came in at GBP 347 million. That was driven by proceeds from the sale of medical device components, which closed on the 1st of July. That wraps up the divestment of our value businesses. Net debt ended at GBP 783 million, below year-end, and at 1.4x EBITDA versus our target range of one and a half to two times. We began our GBP 250 million share buyback in July and finished half of it in September. The second tranche will be done by March. We also declared an interim dividend of GBP 0.22 per share, matching last year. Now let's look at our performance in more detail, beginning with sales. Sales excluding divestments were down 3% at constant currency, to GBP 1.7 billion. Clean Air sales fell 7% to GBP 1.2 billion, as the business felt the impact of weak end markets and previously announced platform losses.
Revenue in PGM Services fell 9% to GBP 207 million, mostly because of our refining and trading operations. Catalyst Technologies rose 20% to GBP 336 million, with licensing sales more than doubling, and Catalyst posted double-digit growth. In Hydrogen Technologies, sales dropped to GBP 20 million as market development slowed. Now moving to profit: underlying operating profit declined 4% when divestments and foreign exchange are excluded. That came partly from pricing headwinds tied to historic contract commitments in Clean Air, along with mixed effects. Volume growth in CT was more than outweighed by decreases in Clean Air and PGM Services. And as we mentioned in May, metal prices have leveled off, with an impact of only GBP 3 million in the first half. Apart from that, operating profit was down 2%. As you can see, we offset nearly all of our top-line performance through the gains from our transformation program. We achieved GBP 35 million in cost savings during the first half, which brings the total to GBP 155 million. We remain on track to reach GBP 200 million in savings by the close of this year. And as those savings annualize, we will see a benefit exceeding GBP 50 million in 2025 to 2026, lifting total savings above GBP 250 million.
For the back half, the plan involves cutting more jobs, improving how we buy materials, and bringing global business services in-house. Delivering this program is still expected to cost GBP 130 million in cash, and roughly GBP 20 million of that is still to come. Turning to the remainder of the income statement on an underlying basis, finance charges fell to GBP 23 million, driven by hedging gains and a release of interest related to tax provisions. For the full year, we anticipate an interest charge of approximately GBP 60 million. At 22%, the underlying effective tax rate matches our guidance, reflecting the global shift toward higher minimum tax rates, and underlying earnings per share came in at GBP 57.4. Reported operating profit was GBP 575 million, helped by a gain of GBP 484 million, mostly from selling off medical device components. On top of that, we booked GBP 63 million in major impairment and restructuring charges. That figure includes GBP 23 million of non-cash impairments, chiefly from rationalizing our IT assets, plus GBP 40 million of cash restructuring charges tied to our ongoing transformation. So moving on to the individual businesses now. Clean Air sales were down 7% amid a tough market environment in which worldwide vehicle output fell in both light and heavy duty.
Platform losses I mentioned earlier also weighed on volumes. In light duty diesel, sales were up 2%, beating a market that was declining. The main driver was a favorable product and customer mix in Asia. Light duty gasoline sales fell 11% because of lower market production, underperformance of our customers in China, and some platform losses in Europe and North America. Heavy duty diesel sales dropped 16%, owing to customer underperformance in Europe, share losses in China, and weaker Class 8 truck volumes in North America, including the ramp-down of a large customer platform. Even with that sales decline, operating profit rose 2% as we keep focusing on operational excellence and transformation. Margin went up 80 basis points to 10.4%. We expect operating performance to improve sequentially in the second half, with margin expanding further toward our 2025 to 2026 mid-teens target. Lastly, we expect strong further cash flow this year and stay on track to deliver our target of at least GBP 4.5 billion. In PGM Services, sales were down 9% to GBP 207 million. Our refining business felt the impact of lower volumes amid continued softness in auto scrap recycling and lower metal recoveries.
With metal prices steady, the price headwind came to only GBP 3 million. Market softness and reduced volatility in metal prices also pulled down our PGM trading business. Operating profit fell 35% to GBP 51 million, reflecting lower refining volumes, weaker metal recoveries, and smaller metal trading gains. So as we look forward, and as Liam mentioned earlier, we anticipate a significantly stronger second half. We have clear line of sight over greater volumes, improved metal recoveries, and efficiency gains as we optimize the cost base. At Catalyst Technologies, sales rose 20% to GBP 336 million, and operating profit climbed 43% to GBP 50 million. Catalyst sales were up 10%, lifted by first fills as new customer plants started up in China and by a cyclical recovery in methanol refills. That more than offset softer performance in additives and a slowdown in formaldehyde. In licensing, sales more than doubled to GBP 60 million, mainly on the strength of our existing portfolio, and momentum continued in Sustainable Technologies, where sales more than tripled from a low base. A bigger contribution from licensing, higher Catalyst volumes, and efficiency gains helped produce strong profit growth, and margin widened to 14.9%.
After a solid first half, particularly in licensing where sales tend to be uneven, we're expecting the second half to come in slightly lower. Our guidance stays the same: strong growth and mid-teens margins for the full year. In Hydrogen Technologies, sales fell to GBP 20 million, reflecting slower market development and customer destocking. The business posted an operating loss of GBP 26 million, in line with last year, as we cut costs and investment to offset the lower sales. Going forward, we anticipate a significantly lower operating loss in the second half as we take further steps to reduce cost, and we continue to expect the business to break even by the end of 2025 to 2026. We ended the first half with net debt of GBP 783 million, which is GBP 168 million below March. And as I mentioned earlier, net debt to EBITDA stood at 1.4x. That reduction came from strong cash flow from divestments, partly offset by returning GBP 224 million to shareholders via dividends and the share buyback. Precious metal working capital was flat, reflecting stable metal prices and efficient management of our metal balances. Non-metal working capital rose by GBP 146 million, primarily because of lower payables.
We anticipate bringing working capital lower during the second half by cutting inventory levels, and we expect to generate robust operating cash flow throughout the group. CapEx came in at GBP 171 million, which includes spending on our new world-class refinery within PGM Services. That project remains on budget and on schedule, with commissioning set to begin by the end of 2025 to 2026. We have a clear route to strengthening future cash flow. Our transformation and cost programs are lifting margins, which lets more cash flow through from our operations. CapEx is on a downward trend. In May, we guided to as much as GBP 900 million across the three years to 2026 to 2027, which is a reduction versus earlier periods. Roughly GBP 250 million of that relates to our new PGM refinery, and it will be self-funded through lower working capital. After completion, CapEx will then come down substantially. Lastly, we don't anticipate material swings in working capital now that PGM prices have stabilized. So all of this together will produce improved cash flow and the chance for greater returns to shareholders. And finally, on the outlook. As you've heard, we are maintaining our guidance for the full year. On a like-for-like basis, excluding divestments, we expect at least mid-single-digit growth in operating performance at constant currency and metal prices.
For clean air, we anticipate modest improvement in operating performance, backed by additional benefits from transformation. Within PGM services, performance should be broadly stable, with a much stronger second half thanks to increased sales, better metal recoveries, and cost optimization. Catalyst Technologies is expected to produce strong growth and mid-teens margins, with a slightly weaker second half. And although sales in Hydrogen Technologies will be lower, we expect a considerably reduced operating loss as we cut costs further. Should metal prices and exchange rates stay where they are now for the remainder of the year, we foresee adverse impacts of approximately GBP 3 million and GBP 10 million, respectively. To sum up, despite difficult market conditions, we have posted a resilient performance, and we are keeping our full-year guidance of at least mid-single-digit growth. We are controlling what is within our power — pushing our transformation program, lowering our cost base, investing with discipline, and maintaining an efficient balance sheet. Strong cash flows are being generated. Net debt has fallen to GBP 0.8 billion, and we are returning money to shareholders via dividends and our share buyback. With that, I will pass things back to Liam.
Okay, thank you very much, Stephen. I'll walk you through the strategic progress we've made, and after that we'll move on to the questions. So a quick reminder of what our portfolio looks like following the divestments. Here it is. These are the four components of our portfolio in which we hold the aspiration, the ability, and the capability to lead the global market in every single one of these businesses, with PGMs — the Platinum Group metal business — serving as the foundation, supplying and recycling critical PGMs for all of the other businesses. Now, in the last full-year update, we laid out fresh targets for the full year and new strategic milestones, and I'm pleased to report that across all of the milestones — which we've grouped around customers, capability, and transformation — we are on track, so all of them are green with a single exception, and that one concerns Hydrogen Technologies, green hydrogen, which is market-related because of the slowdown in market development there. I'll cover each of these points as we go through the presentation that follows. But the key point here, measured against the new, the latest strategic milestones we've set for ourselves, is that we are very much on track. Now, if we turn first to Clean Air — and we said this last year as well — in the near term, what will really drive results is Clean Air and CT.
And that's what came through in the first half. In Clean Air, Stephen has already talked about how we want to — how the results came out in the first half, but also how we expect to keep making progress in the second half too. And here we'll stay on our path of optimizing the manufacturing footprint and raising utilization. What we're doing over time is concentrating production in our most efficient plants. That's where consolidation is taking place. It takes a bit of time, since each plant ties to specific customer contracts. All of those plants — the most efficient ones — are already built. So the CapEx has already been spent. That's why our CapEx sits well below depreciation for this business. So we'll keep going on that manufacturing excellence journey. Beyond that, we'll keep chasing further opportunities in procurement and supply chain. We actually have a new lead for supply chain in Clean Air, who is finding plenty of new opportunities for us to pursue. And we have a new global head of procurement whose eyes go wide when he looks at our procurement portfolio and sees the opportunities we have. So with these two new leaders, we're taking a fresh look at what's possible from a Clean Air point of view.
This, again, gives us confidence that we can keep moving forward on the path toward mid-teens margins, which we expect to reach quite soon, by the end of 2025 to 26. And it's why we're highly confident in our ability to hit the GBP 4.5 billion cash flow target through 2030 to 2031, with a great deal more beyond that as well. A further piece of this is lower R&D spending, which naturally ties to the phasing out of emissions regulations. So that covers Clean Air. On the Catalyst Technologies side, you've once again seen very strong performance. What that performance doesn't really show is the effect of the sustainable technology project wins we hold. All of this is now booked to come through in the years ahead. But we already have 13 projects accumulated here, three of them in the last half year from a sustainable tech standpoint. In the last half year, that's two sustainable fuel projects. It's one low carbon hydrogen project. And we have a very robust pipeline of more than 140 sustainable solution projects. Now, one I'd like to explore a bit to explain the dynamics of our portfolio and also a little about how it fits together is the DG Fuels sustainable aviation fuel plant in the USA, because we've recently also secured a new license for that business.
We secured a license for that business. We've obtained a new license — I'll get into what that means shortly — and it has a substantial effect on our results moving forward. We aren't treating it as a fresh project win, since that customer win was already ours, but it matters quite a bit. Let me break that down a bit. Take the DG Fuels example. This plant sits in Louisiana. It's the biggest Fischer-Tropsch sustainable aviation fuel facility anywhere in the world. Without going deep into the technical side, this is genuinely cool stuff. What happens is you take agricultural residues — sugarcane in this case. So the sugarcane gets harvested, the roots stay in the ground, you collect that residue, and our technology converts it into sustainable aviation fuel. Think about that for a second. Powering a jet plane with agricultural waste is quite remarkable from a technology standpoint. We had already sold the FT CANS technology. That's a specific license to DG Fuels. And DG Fuels has now additionally taken a hydrogen technology license from us. With that hydrogen technology, we can essentially take this waste biomass and this used sugarcane, add hydrogen, and convert it into syngas.
And then, using our FT CANS technology, we convert that syngas into synthetic crude, upgrade it even more, and after that it turns into sustainable aviation fuel. Now, what's really key regarding this project—besides that incredible technology—is what you see at the bottom, since we think this is the way sustainable aviation fuel and this industry will develop: an offtake agreement is in place with Air France, KLM, and Delta Air Lines. A strategic partnership also exists between DG Fuels and Airbus aimed at accelerating sustainable aviation fuel's penetration. That matters a great deal, because it provides DG Fuels with confidence and a clear line of sight to demand, and it gives the producer a clear line of sight to a cost-effective supply of sustainable aviation fuel. Having such an offtake agreement in place greatly boosts the bankability of projects like this one. That's why this project is so significant. In this particular case, JM actually has two revenue sources coming in. We believe this is what the industry's future looks like. Offtake alliances will be getting formed. In this instance—the world's largest FT plant—JM technology sits at its heart. Now, here's one more CT example and a sign of where things are heading.
There may be quite a bit of technical detail on this slide once more, but it's genuinely rather interesting. Basically, what we mean is this: if you look at it through a customer's eyes, they want solutions that decarbonize their operations. That might be a decarbonized ammonia solution. It might be several pathways toward sustainable aviation fuel, or it might be low carbon hydrogen, blue hydrogen. And we're able to use various feedstocks and, with our technology plus partners, build an end-to-end solution for customers. That matters because our technology won't always cover the whole chain from end to end. In fact, typically no company's technology covers the entire chain. So from a customer's perspective, what happens is you must negotiate with several companies. You must assemble different flow sheets. You must negotiate various contracts and prices. And the whole thing is somewhat clunky. What we've done here is create integrated flow sheets alongside market leaders in this area — in this instance, Honeywell UOP, thyssenkrupp Uhde — and from a customer's perspective, it's quite easy. We hand them one flow sheet, one price, and we can guarantee that it will work.
From a customer standpoint, that makes things a lot simpler. And again, this is one more illustration, from a commercial excellence standpoint, of how we win and why we win in the marketplace: we take a strongly customer-oriented approach, supported by excellent technology. Yet excellent technology by itself won't sell unless it's presented in a customer-friendly format. So that's just one further example here. I've talked before about building commercial capabilities. I've talked about how important it is that we also strengthen our engineering capabilities. We've made very strong progress on this, increasing the number of engineers we have. We've gone far afield. Maybe Manchester isn't that far, but Mumbai is. And the key goal here in going to both Manchester and Mumbai was to tap different pools of engineers so we can service the demand out there for our products. So we're very much on track with building our engineering capability. Another really important point for a company like JM, where Platinum Group Metals forms the backbone: we are building the world's most efficient Platinum Group Metals refinery to replace our old refinery, which in the meantime is very old — as in 50 to 60 years old.
This kind of replacement happens only once in a lifetime. There won't be a need to do it again for another 50 to 60 years. It's a one-time CapEx effect. In the end, it will produce a plant that is much more efficient, much safer, and much more sustainable, and it will also deliver a significant working capital benefit. So there's a lot to look forward to there, I think. And thankfully, as Stephen said, it is on budget and on time. On transformation, we've talked before about several threads that we're working on. The most visible one, probably from an investor's point of view, is of course the cost savings piece, GBP 155 million so far. We have a target of at least GBP 200 million this year. So you know what's coming in the second half. And as Stephen pointed out earlier, the annualization of that impact carries over into the following fiscal year. So we do get a benefit from that as well. JM Global Solutions might not sound very exciting to anybody here. This is actually pretty fundamental for JM, for us to be able to work in a more efficient manner. This is all about the professionalization of our, basically our transactional processes.
We've built out an outsourced shared service center model here. And this isn't a situation where we're still planning it. It's already up and running in our core markets. We've moved our processes over — HR, finance, procurement, IT — and we're now in the middle of building those end-to-end processes that are far more efficient, which will pay off for customers, for internal users, and for our cost base. So this is simply part of laying a more solid foundation for the company — one that's more agile and more efficient. And the last thing I'd point to here — and on this, I have to say I'm eternally grateful as well. A lot of change is happening at Johnson Matthey. A lot of change is happening in the world, but inside Johnson Matthey too, plenty is moving all at once. And when you go through that kind of change, keeping people engaged can be tough. I've been very encouraged that, for the second time in a row now, we've seen an uptick in our engagement scores. So that is something I think is genuinely encouraging and really stands as testimony to the resilience of our people, who are driving the results we've been presenting today.
And lastly, on sustainability — it’s genuinely built into all that we do. Our nature strategy was launched in September. Our double materiality assessment for the European Sustainability Directive has been completed, and we marked our third annual Global Safety Day. Having a truly safe culture matters enormously to us. I’ve always firmly believed that when your safety culture is strong, the rest of the culture follows. Our safety stats have improved considerably. To me, that’s one more sign that the transformation of JM is heading strongly in the right direction. External parties acknowledge us for that too. That was essentially all we intended to present today. I hope that Stephen and I together have managed to explain both the first half results and the reasons we’re so confident about the second half and why we keep our outlook unchanged for the full year. With that, we’re very much looking forward to taking your questions. Thank you very much.
Okay, thank you. Right, we’ll start with questions from those here in the room. Fine, Tristan, on the right-hand side. Thanks — Tristan with Deutsche Bank.
It's good to hear you're pointing toward better clean air results in the second half, since I believe that's been a major area of uncertainty for the markets. How much visibility do you currently have on the auto markets, and how confident are you in the H2 guidance? And perhaps you could also address how you performed relative to the market in H1 as well. Thank you.
Okay, so like we discussed, Tristan, really strong, really strong results. Revenue is down slightly, obviously, but that was more than offset by the profit increase, which is great. I think if you look at it against the auto market, the 7% decline was kind of split evenly, half from the market and half from those platform losses we had before. That obviously gives us a fairly solid view into the second half. We aren't building in any meaningful volume recovery in the market, if there's any at all. That point matters a lot. The auto market is genuinely difficult, so the improvement in profit and margin will follow the same pattern. It comes more from self-help, from the transformation benefits we've discussed, and that's what delivers the additional sequential gain in operating margin that we've already seen. You'll see that play out in the second half as we move much nearer to that mid-teens target, which we'll hit in 2025, 2026.
Sure. I might offer a small forward-looking note first, and then I'll ask Anish to add some color, since he speaks with the OEMs on a daily basis. Looking at our HDD win rate so far this year, the heavy duty win rate is top notch. That gives us a lot of confidence in our heavy duty market share going forward. As for next year — we're right in the middle of the planning process. From a market share standpoint, our expectation would probably be a stabilization next year. That said, I'd rather turn it over and let Anish chime in here and share a bit of color on what's coming up in his discussions with the OEMs.
Thank you, Liam. Good morning, everyone. I think when we look at our customers in the automotive segment, they're facing a very difficult environment right now, because several impacts are converging. The first one is that they have less demand on the consumer and the fleet side impacting LDG, LDD, and HDD. On top of that, they have a fundamental transformation of the market in China, which is really impacting mostly the Western OEMs, and now the uncertainty about tariffs. There's a lot of things coming together, which makes it very difficult to predict the volumes in the market short term and mid term. That's just a reconfirmation for our strategy to really focus on what we can control. That is really our value-based pricing, which we are more and more implementing to the market. It's the focus on our efficiencies, our transformation. You've seen on the slide that we are currently initiating the second wave of the transformation in Clean Air that is going to unleash a lot of potential to really reconfirm the guidance and the commitments we have given, which is mid-teens margins by end of fiscal 2026 and the GBP 4.5 million of cash until 2030 to 2031.
And it's becoming clearer and clearer to us that there's still plenty of cash even beyond that — 30, 31 — and that cash is coming from combustion engines, which will definitely be stronger for longer. We just need to wait a little to see in which areas, in which segments, and in which markets around the world.
All right. Moving on to the next question — Sebastian, in the center. Claire, perhaps a handful. I believe he is a bit nearer to you.
Thank you. This is Sebastian Bray from Berenberg. I'd like to begin with a few questions about clean air, if I may. At present, what level of R&D is being invested in that segment? As I recall, it was roughly GBP 100 million. And what is that money currently being used for? To what extent could that figure be reduced? Turning to clean air and the regulatory environment — taking Euro 7, China 7, and the stricter emissions rules in the U.S. — how confident is Johnson Matthey about the timing here and about these changes actually happening? My third one is smaller: is there anything remaining or worth noting on the litigation front specifically? I believe there was one outstanding case tied to heavy duty. Has it now been settled, or am I wrong about that? And anything you could share on possible action connected to the divestment of the old health business would be helpful. Thank you.
Okay, thanks very much, Sebastian. I'll begin, and Stephen, please jump in. Regarding R&D spending, it was in fact for clean air, in the neighborhood of GBP 100 million. That figure has dropped considerably. Basically, it's going to keep falling as time goes on. The bulk of our R&D budget at present is directed toward the new emissions rules. That means Euro 7, CARB 2027, EPA 2027-style regulations, plus emissions regulation updates in China and India. So that is where the great majority of it is allocated. Once those emissions requirements—say the most recent updates—are behind us, then you should expect that R&D to essentially taper off. I wouldn't say 100%, but very, very sharply, down to a level of merely maintenance R&D. So that's our firm expectation. And that's among the factors driving our margin improvement ahead, both near term and long term, overall from a regulatory timing and an R&D standpoint. On the litigation, would you like to handle that one?
Regarding clean air, Sebastian, we don’t have any meaningful litigation. You may recall that a few legacy cases existed. Everything there has been resolved. As for divestments, one lawsuit is still active. It concerns the sale of the health business. We firmly reject every allegation in it. Our confidence in our position is high, and we expect to have it resolved within roughly the next 12 months. So that area is clear for us.
Thanks. If I could just build on that, I want to ask about how confident we can be that Euro 7, China 7, and the US legislation will really move forward. At this point, is Euro 7 locked in? With EV penetration possibly reaching such a high level by then that it matters less, is China 7 still an open question? And do you have any thoughts on the US?
Yeah. So I think we live in a world where not much is fixed. It's really difficult to claim anything is 100% certain. The market environment, I think, has shifted enough that the odds this legislation gets enacted are now higher rather than lower, simply because EV — since EV penetration has slowed down so much, ICEs are going to stick around for a lot longer. So that next level of a regulatory upgrade is going to be needed. If not, especially in the U.S., you'll end up with litigation, because there's technology out there that could help save lives and it isn't being used for cost reasons. That wouldn't be a good outcome. So we actually believe the probability is higher rather than lower than before that this regulation and legislative direction will carry on.
Thanks. All right.
Ranulf, over to you, Nancy.
Hello there. Ranulf here from Citi, with just a couple of questions, please. First, returning to PGMS — I believe you've laid out the components behind the first-half decline and the components behind the recovery, but might you be somewhat more specific, or at least rank those components, in terms of where the largest deltas have shown up and where the greatest risks sit in the recovery? And my second question concerns tariff exposures. Of course, it's a highly uncertain future, but could you provide some context — perhaps your net U.S. imports, exports, and localized production across key regions? That would be very helpful. Thank you.
Sure, Ranulf, thanks. So if you had to break it down, I laid out 4 components of the PGMS. Let's say the reason the second half is going to be significantly better is that, by and large, they're roughly equal, by and large. So without going into epic detail, the first one is refining volumes. And again, refining volumes aren't automotive catalyst scrap. This is industrial scrap. Higher margin industrial scrap — automotive catalyst scrap tends to carry lower margin. So higher margin volumes, that's one significant piece. The second one is the volumes tied to life science technologies. This involves pharmaceutical and agrochemical customers' products that use PGM catalysts, where typically those sales land in our fourth quarter, financial quarter. So the first calendar quarter. And there we also have line of sight to those volumes. The metal recoveries — we know from, I mean, we've been in this business for so many decades. We know where and when the metal recoveries will come in. And then the efficiencies are all, I would say, in our own gift. This is just about us managing our cost position. So all of those elements, I would say if you were to say the puts and takes, we largely have line of sight.
The refining volumes are mostly there on site and ready to go. We hold the order books for life science technology. Past experience tells us where the metal recoveries are going to come from. And the efficiencies really just come down to, I would say, management discipline. So broadly speaking, there will be some variation, but it's roughly four, not entirely equal, though relatively equal buckets. The probability, or let's say the risk attached to those, is fairly low, since either we have it on site or within line of sight, or it's entirely within our gift. That's how I would frame it.
And maybe I'll just add a bit from where I sit. What we're discussing are factors inside our own control. All right. We aren't building in any assumption of a rebound in the auto scrap market. That point matters a great deal. What we're referring to is contracted volumes over on the non-auto side. And we aren't assuming metal markets go back to being, say, highly volatile. That point matters a great deal. Now, ideally, as we move into next year and the economy picks up, we'll witness that rebound in the auto scrap market, and that gives us confidence not just for the next six months, but also, clearly, for the business moving forward with the new refinery,
And moving to your second question, Ranulf, about U.S. tariffs and the current discussions — I mean, first off, I think everyone needs to wait and see what actually materializes, but let me offer a few data points from a JM perspective. Canada and Mexico — if you combine them, since that's the pair most recently talked about in the media — from a sales standpoint, that's roughly 5% for JM, so quite small. The U.S. is a very significant market for us. But it's also a market where we have an extensive manufacturing and refining footprint. So we tend to serve the U.S. from within the U.S. That means we don't need any additional investment, for instance in manufacturing locations, out of any fear of trade tariffs. So we're well set up in the U.S. Typically, our biggest manufacturing sites are in the U.S., Europe, and China, where we largely serve local for local. So while tariffs will certainly have a global impact and there could be knock-on indirect effects, we believe the diversification of our portfolio and geographic footprint leaves us in a relatively solid position there.
Let me just ask one quick follow-up about the shift in feedstock for the refinery. I mean, how did you pull off the move from auto scrap over to industrial scrap? And if the margin opportunity is that strong, why wasn't this done before? Is this a structural change to the margin going forward?
Yes. That's a really good question. We've actually always processed industrial feed too. We've handled plenty of automotive catalyst scrap, but industrial scrap has been part of the mix all along. In practice, in most cases, because of the refinery capacity constraints we faced, we were already at the limit of what we could take in. Since the automotive catalyst scrap market has been so weak, our teams — our commercial team — went out and brought in new industrial process material. That was a deliberate effort, since we had the capacity. We secured new industrial feeds, and those carry higher margins because their refining processes are more complex than automotive cat. And in fact, going forward, that will mean a shift in mix over time. That higher-margin industrial feed will play a bigger role, especially with the new refinery coming, where we have stronger capability to take in more. So that should work in our favor going forward. And I'm glad to say the team has done a pretty strong job of bringing in those new customer contracts.
Tristan, I believe the culture within that organization is genuinely changing. Sorry, Ranulf. PGMS, I think, has traditionally been viewed somewhat as an internal supply operation, and we're really gaining from injecting commercial strength into it. First Alastair, with you, and now Louise Melikian. That gives me real confidence there's a good deal more distance to travel in that business, and we're already seeing those early fruits.
Is there anyone else here in the room?
Charlie, sitting beside Ranulf. Many thanks. It's Charlie Bentley at Jefferies. I've got essentially two questions about cash. First, on the PGMS facility's commissioning and how the working capital benefits will be phased. Is that GBP 250 million across 2025 and 2026? That would be rather welcome. Any thoughts there? That said, we've seen these facilities stumble from time to time. As you move from one to the other, what guardrails are you putting in place so that doesn't occur? Second, you clearly acknowledge underlying operating cash flow was fairly weak in the first half, with an improvement in the second. What's your expectation for year-end net debt and where you land on that leverage ratio? You also mention declining CapEx from 2027 and 2028 and the ability to return cash to shareholders on a recurring basis. How do you think about, when you're below the low end of that range, flexing more capital returns through buybacks?
You've clearly begun to lean on that mechanism more. So that's just the thinking around capital allocation before you reach the end of that CapEx.
Yeah. Thanks, Charlie. So Stephen is going to handle the cash-relevant net debt piece, and I’ll cover the startup plan and what we’re doing to make sure it gets started and keeps running.
Yeah. Yeah. So, Charlie, that's a great question. There's roughly GBP 250 million left to spend on the refinery. The trouble is that the current refinery is 50 to 60 years old, which makes it fairly inefficient and not particularly reliable. As a result, it's tying up a lot of metal during refining. With the new refinery, that product will essentially flow through very fast. That delivers a one-time working capital benefit of roughly the same size. So in cash terms, it will basically pay for itself from this point forward. Commissioning gets underway by the end of 2025, 2026. This isn't simply a matter of flicking on a light switch. Moving the different metals across from the old refinery to the new one will take time. That process will take up to 12 months, and our expectation is that the working capital benefit will emerge across that period. Okay. And what we're left with is a refinery that's far more efficient, has a much better cost base, stronger sustainability credentials, and, really importantly, is much, much more reliable. So we won't see the working capital backlog swings that we've had before. The other working capital point, and this is absolutely critical to PGMS, is that the era of high metal prices and changing metal prices has passed.
That was among the main things driving the swings you saw in working capital on the balance sheet. And you've now seen that come through with very limited impact in the first half at all. Net debt quickly at year-end. Peak CapEx will land in the second half. There's a genuine opportunity to bring working capital down further. So I'd expect us to be at, or perhaps even under, the target range of one and a half to two times — meaning debt will be around where it is now, or lower. We do, of course, have GBP 125 million in the share buyback still to come, but there will be further reduction. And then longer-term capital allocation.
Right, Charlie, I’ll address the transition planning piece. So once we begin ramping up that entire PGM side, how do we go about mitigating any risks from an execution standpoint? I believe that was the main thing you were asking. At present, we’ve got a very strong project lead on this project. It’s a large team, and naturally it has enormous priority for everyone here. Usually, the place where such projects fail is the handoff between the project lead and the operational lead. Our operational lead is already appointed — one of JM’s most seasoned leaders from an engineering standpoint, and he understands the processes thoroughly. The key point to note is that this plant processes 5 metals. We know these processes — we’ve worked with them for many decades — yet it remains a new plant, and new plants can always encounter hiccups. We’re taking what I’d describe as a risk-based, relatively conservative approach: we’ll only commission the new plant in stages, essentially working through the different metals, and confirm it performs. Meanwhile, the old refinery stays in place.
There's time available. In major efforts of this kind, teething issues tend to arise, I believe. Teething issues are something you should anticipate. From the standpoint of engineering execution, we've accounted for that in our planning. The old refinery running somewhat past the planned duration serves as our backup. Startup will happen in stages across the whole facility, and it ought to be ready by 2027, at which point it should be fully commissioned. So the risks, I think, have been mitigated to the greatest extent we can. It simply helps that we grasp completely the processes that are, so to speak, central to this new project.
So how do you plan to approach capital allocation from here on out? You're all set.
Right, so the main point here is that we're going to generate considerably more cash as we move through this cycle. Historically, we've laid out a very clear capital allocation framework that will hold up over time, and obviously it puts investment in the business and returns first. The bottom line is that more cash is going to be there. Of course, we'll have to decide whether it gets deployed inorganically, but we've said we won't go off and do anything crazy with, you know, big acquisitions or a fourth leg. So look, you can take from that that cash will be available, and I'm sure cash will be available for shareholders.
Thanks. Alright.
Now we'll take some questions from the webcast. The first comes from Martin Evans at HSBC. I should mention that Ken Rumph from Goodbody has asked a very, very similar question. But we'll begin with Martin's. You mentioned the slowdown in the hydrogen market, but could there be potential risk with the new U.S. administration that some of the 140 sustainable technologies projects in CT also experience some delays or cancellations, given the more hawkish attitude toward the energy transition, including a scaling back of IRA subsidies? And then Ken Rumph has kind of expanded that a little bit beyond CT into prospects for green hydrogen and what it means potentially for existing contracts as well as the pipeline.
Okay, absolutely. Let me begin with the question Martin raised, which feels especially pertinent right now — namely, what will happen with the U.S. administration and matters such as the Inflation Reduction Act. In practical terms, I believe it's key to grasp that the contracts signed under the Inflation Reduction Act generally have a 10-year term, and they cannot be altered simply because a new administration takes office. So once you have signed a contract, it will continue to run. What I think matters a great deal — and this caught many people off guard — is that a large share, indeed most of the jobs created, and a substantial number of manufacturing jobs, have come about in the U.S. as a result of the Inflation Reduction Act and other legislation that followed. The overwhelming majority of those jobs were in fact created in states where Republicans hold a majority, so as a rule the Midwest belt has benefited more strongly on the jobs front than the Democratic states, and I am fairly confident that no Republican member of Congress would willingly surrender jobs in their own district and then try to persuade their voters that doing so is good for them.
I'm less worried about how the Inflation Reduction Act plays out in practice or what its practical effects might be, because to some extent the train has already left the station on a lot of projects. Jobs are already there, and it's Republican states that are benefiting. I think if you consider our portfolio — and that was partly what the question was about, Catalyst Technologies — could there be an overall slowdown in the energy transition? Again, I think if you step back and look at our portfolio, what's probably, or what's likely, in the U.S. is that feedstock there comes with an abundance of cheap gas, typically shale gas, as a feedstock. So for something like low carbon hydrogen, the economics can actually work in the U.S. If the economics work, that's a direction companies will typically take regardless of where legislation stands. If you think of the example I mentioned with DG Fuels from a sustainable aviation fuel point of view, think about farmers being actually a core clientele for the Republican Party. If you can raise farmers' income by finding a second source of income for their crops — so not just selling the sugar cane, but actually selling the residue to produce sustainable aviation fuel — that is something that's going to be economically attractive.
You could see this as the glass being half full or half empty, but in my view there won't be any shortage of opportunity for JM when it comes to the portfolio we hold and the legislation we can anticipate ahead. Turning to green hydrogen — I believe this was more Ken's question — green hydrogen is somewhat different, in that you still have to construct an infrastructure for it. You need regulatory clarity regarding which incentives will be required. And you need economies of scale to bring costs down. So that differs from, say, low carbon hydrogen, where an infrastructure is already in place and you often have clarity on subsidies. It's a different animal. Our perception is that it will simply take longer. That's what all the market feedback tells us. That's what every market forecast is saying. It remains inevitable that the green hydrogen market will take off, for the simple reason that you cannot reach net zero and decarbonize hard to abate sectors such as steel, ammonia, et cetera, without green hydrogen. But you do need to put the right infrastructure in place, have clarity of incentives, and obtain those cost benefits from economies of scale.
Our sense is that everything is simply going to take somewhat more time. The result for us, then, is that we have to adjust to that speed at which the market is developing, ensure we aren't putting in too much investment at a moment when the market just isn't prepared to take up that investment, and lower our risk through additional partnerships. That is the path we are following.
Alright, thanks a lot. Let’s go to the next question — Thomas Striter from Striter Research. Could you discuss sustainable aviation fuels and what effect ReFuelEU Aviation will have on market demand over the next few years, and also how you’re positioned for that?
I'm glancing over at my colleague Maurits, and I'm quite worried about him — he's got a tie on, and whenever someone shows up in a tie, I always worry they've got a job interview lined up afterward. But Maurits, maybe you could jump in here and share your view on ReFuelEU and SAF, and on how things will develop in Europe.
Okay. Hey everybody, and apologies for the tie. All right, good. So, looking at sustainable aviation fuels, I'd say the global picture is quite an exciting one. What you're seeing is simply a growing number of mandates taking effect. And that's not just in Europe. Yeah. There's activity in the U.S., and recently you're also seeing a great deal of activity in many Southeast Asian countries that are putting these mandates in place as well. Now the next major one is, of course, China, which is also discussing this. And we're talking about genuinely substantial figures — probably 15%, perhaps an even larger share of the fuel pool that has to shift toward sustainable aviation fuels, with timelines of roughly 2035. So looking at that, there's keen interest in SAF, because it's one of the very few ways to decarbonize airlines, you know, and airline flights. Also, these planes, when you purchase them, stay in operation for more than 30 years. These engines have to be fueled. So if you want to bring carbon emissions down, you need to move to sustainable aviation fuels. So looking at that, there's very strong interest in our portfolio. Ours is a broad portfolio, and we believe that, you know, all these mandates will continue to literally fuel demand for sustainable aviation fuels.
Alright, thank you, Mark. That's great. Appreciate it. Now over to Graham Campbell at River Global. Two questions from you. The first concerns clean air. It looks like you're shedding share because of platform losses. Clearly there's a shortfall between new wins and revenue. How would you characterize your hit rate on new platforms? Then the second one is about management changes. Could you provide some context around the shifts in roles at PGM and Corporate Development Strategy? What advantages do you anticipate from that?
Yeah, thanks a lot. So for the platform wins, Anish, I'd suggest you give some color on that, and I'll take the management changes.
Now, regarding platform wins, we're actually sitting in a pretty favorable position. The target has been exceeded consistently for over 12 months at this point. As an illustration, our win rate year-to-date in HDD stands at 100%. So I'd call that pretty solid. There are two topics I'd like to outline. The first is that as our industry evolves, fresh chances arise to secure business beyond tenders. And we've just secured, for the first time, a platform that historically we had lost to JM, and this came outside a tender process. I think that's a first very strong outcome from the hunting mindset we've rolled out everywhere in the company — the spirit, the processes, with the sales incentive plan put in place more than 12 months ago. These are genuinely good results demonstrating that our commercial focus is paying off. The second point on commercial opportunities is really cross-selling, which the four businesses are putting into practice right now. There's a reason PGMS always serves as the backbone in the strategy — because it matters for all of our customers. From what I can see, for instance in HT already, the cross-selling opportunities pitting HT with PGMS, CT with PGMS, or even Clean Air with PGMS are enormous.
Strategically, what we're aiming for is a shift: instead of customers having a transactional tie to just one of the JM business units, they'd have a strategic relationship with JM as a whole, since they're working with more than a single unit. And I'm fairly confident that this will open up additional opportunity for the company and boost our win rates across all four businesses.
Thanks, Anish. Regarding the management changes, let me lay out what they are and, more importantly, the rationale behind them. The first thing to note is that we've reduced the size of the executive leadership team. That's simply very much consistent with our overall transformation, given how much progress we've made, especially with the divestments of smaller businesses, but also with the outsourcing of key processes from a functional standpoint — we can afford a smaller executive team. So it's just consistent with the company's overall transformation. On the key changes made, one is that we've put Alastair in charge of what we're calling strategy and operations, which covers all the functions tied to transformation. Think about IT procurement — the big-ticket functions that can really affect the bottom line. And Alastair has been running a P&L. So Alastair knows the JM business. He was a CFO in a former life, so he knows the functional world, and he's perfectly suited to bring functions and business together and make sure we capture all the opportunities that exist from a transformational standpoint.
That was the reasoning behind Alastair. Taking over from him as head of the PGM Services business is a woman named Louise Melikian, and she is actually in India today. Louise is an engineer and was previously an investment banker. I don't want to step on anyone's toes here, but she is extremely pushy and she has the mandate to drive things. We talked about those extra opportunities for PGMs. Her mandate is to push that forward. And the last change: we've combined what used to be two separate units, Clean Air and Hydrogen Technologies, in light of the restructuring and cost cuts in Hydrogen Technologies, which today lacks the critical mass to stand alone as a business. We've just placed that under a single leadership, with Anish now responsible for both Clean Air and Hydrogen Technologies. That lets us gain from internal synergies on one hand, of course, but it also lets us gain from customer-related synergies. For instance, a lot of our customers that are big in ICEs are also shifting toward a zero emission future over time. So customers are in fact, for fuel cells, for example, if we're talking to a Cummins, we're talking to them about both ICEs and fuel cells and electrolyzers.
There are also synergies tied to customers in this, so that's the context for it. We believe it makes a great deal of sense. I'll stop at that.
Thanks, Liam. That brings us to the final question from the webcast, which comes from Sid Sakuma at Jupiter Asset Management. Could you give us some detail on how working capital moved during the first half, and what you expect for the second half?
Right, I understand. So the first key thing, just to restate it, is that there's no meaningful effect on the metal price. That really matters. That's correct. We did have an outflow of roughly GBP 150 million in non-precious metal working capital. That's on the payable side. It really comes down to two things, timing. So some large payments landed in the first half, such as bonus payments that are sort of phasing. And then second, one of the advantages of professionalizing our back office is that we're getting better at paying invoices. That actually led to an acceleration of our payables. So that's a cash outflow, which is a good thing in the first half. In the second half, look, I think there's still genuine opportunity for us to drive cash through better working capital management. All right. So a real focus on bringing inventory levels down, a real focus on making sure every single invoice gets collected on time or collected early. So that gives me, that gives me real confidence that we've had a big focus on profit and now there's a real shift toward cash. And that will drive more cash generation in the second half. On an underlying basis, I expect us to be free cash flow positive in the second half, even with that higher CapEx.
After that, we expect cash flow to rise.
Alright, thanks. There are no further questions from the web, it seems. Let me just see whether anyone in the room has a follow-up. No, nothing coming there. So many thanks to all of you for joining us today. And we'll be seeing a number of you over the coming days and weeks at the roadshows and various investor meetings. Thank you.
I appreciate that.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Johnson Matthey Plc transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Johnson Matthey Plc earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.