Home / Transcripts / Johnson Matthey Plc (JMAT) · November 19, 2026

Johnson Matthey Plc (JMAT) Earnings Call Transcript

November 19, 2026

London Stock Exchange GB Materials Chemicals earnings 74 min

Earnings Call Speaker Segments

Louise Curran executive
#1

Morning, everyone. Louise Curran here, Head of Investor Relations at Johnson Matthey, and it's a real pleasure to welcome you all to this morning's half-year results presentation. Thanks for joining us at Deutsche Numis, and a warm welcome as well to those of you on the webcast. Just a quick bit of housekeeping before we get going: please could you put your phones on silent. Today it's my great pleasure to welcome Liam Condon, our CEO, and Alastair Judge, our CFO. Before we kick off, I'll draw your attention to the cautionary statement; as for the agenda, it follows the usual format, with Liam taking you through an overview, then Alastair walking you through the financials, and finally Liam returning with a business update at the end. There will, of course, be plenty of time for Q&A. With that, over to Liam.

Liam Condon executive
#2

Thanks very much, Louise, and good morning to everyone. A warm welcome from me as well. It is great to see such a big crowd here at Deutsche Numis. I had some worries that with GTA 6 launching, the analysts might all stay away, but it is wonderful that everybody showed up. As Louise mentioned, I will walk you through a few of the highlights from our results. I think you are all aware that we have talked a good deal about transformation at Johnson Matthey, and the big question always is, of course, whether that is showing up in the results. What you can see today, I think, makes it very clear: yes, the transformation at Johnson Matthey is delivering very tangible results. The standout figure here is a 13% rise in underlying operating profit. The media usually focus on the reported number, which is +45%, which is very pleasing. To get to that reported figure, you need to add back the effect of metal pricing, Cormetech and FX. The underlying number is normally the one we use to judge how the core business is performing. With 13% growth, you can see this is pretty strong. The main driver has been Clean Air, our biggest business. It is higher sales, higher profitability and a higher margin; we have lifted the margin once more by 180 basis points, and you have seen that steady margin improvement over recent years, and that journey will continue. We will come back to that a little later in the midterm as well. On the cash flow side, you will have noticed we were soft; we had an outflow in the first half. That is purely a timing phasing matter tied to a stock take at a refinery in the U.S., which Alastair will touch on. It all reverses in the second half, so we are very, very confident that we will generate even more cash than we did last year, which was GBP 168 million for the full year. You will see a big swing in the second half, and a very strong second half from a cash perspective is not unusual for Johnson Matthey. All of that, those results, give us the confidence to upgrade the outlook for the full year. Normally we would try to steer clear of an upgrade in order to stay on the conservative side. Unfortunately, the numbers were so good that we had to upgrade. Otherwise, the math does not work. We are moving from a low to mid-single-digit increase in underlying operating profit to high single digit; so a significant upgrade compared with what was originally forecast for the year. As you can see, really strong financials. What matters just as much, I believe, is the strategic progress we're making, since that comes down to the foundation being built, so that we aren't merely delivering or posting strong financial figures for a half-year, but can keep doing so on a sustainable footing as we move ahead. On the strategic front, we've been busy; essentially we've gone through a portfolio transformation; during this half we divested the CT business, the Catalyst Technologies business, to Honeywell, basically at the end of July. Roughly two days afterward, we completed the purchase of Cormetech, a leader in the stationary emission control market in the U.S., in a business very close to our core. Our core centers on PGMs and emission control, Clean Air; so this is a genuinely valuable addition for us, letting us concentrate more on what we do best. Naturally, the divestment of CT, of course, has created a great deal of value for shareholders. This new Cormetech business has an equivalent inside JM, which was always operated as an independent, very small, nascent business within the large Clean Air. We call it Clean Air Solutions, so stationary emission control versus catalytic converters on cars and trucks; we've combined these two businesses, and in future that will be called Clean Power. Cormetech and Clean Air Solutions will form a new business that we'll report separately going forward. We'll say a little about that later, the dimension, the size of it. But I can already signal that integration is progressing so well and the outlook for the business is so strong that after only two months of integrating Cormetech, we actually have to raise the outlook for this entire business going forward. So there's pretty strong momentum here and an integration that is going very well. A third point I'd like to highlight: we've been continually refining our operating model, and there are really two components to it. One is right-sizing our corporate and functional setup for the size of business we're going forward with, minus Catalyst Technologies. The other is moving decision-making closer to where our customers are. We've basically set up a distributed P&L model with six managing directors who can make decisions much faster and much closer to customers. You can see how the impact of this model now translates into our financial results. We're simply doing better, also because of the operating model we have; we still have room to refine further. There are still overheads we can take out. We're working on that. But I think this new model is working very well right now. The sum of all of this is substantial shareholder returns. We gave our word — and I think it seemed fairly ambitious when we said it — that we would hand back GBP 1 billion to shareholders; for a business the size of ours, that is a substantial sum. Achieving that requires a great deal of work. A GBP 800 million special dividend has already reached shareholders, and we are GBP 72 million into a GBP 200 million share buyback. A billion is coming. The bulk of it is already here. On top of that, shareholders will receive the GBP 200 million we have pledged from year-end onwards, split roughly evenly between dividends and a share buyback. You will have noticed that we raised our dividend for the first time in five years, which signals the momentum we have as well. All in all, we are firmly on track with our midterm targets. I think this is a strong set of financial results. Before we go further into what comes next, I think it would help to look more closely at what has been happening in the first half. I will ask Alastair to come up and walk us through the financials.

Alastair Judge executive
#3

Thanks, Liam, and good morning to all of you. It's a pleasure to be with you today to walk through our first-half results, in which we turned in a very strong performance, with sales, underlying operating profit and margin all growing, helped by two months of contribution from Cormetech. Let me begin with the financial highlights. Group sales rose 9%, as favorable conditions across our key markets drove higher volumes in automotive, and our new Clean Power business, which Liam mentioned, meaning Clean Air Solutions and Cormetech, also did well. Underlying operating profit climbed 32%, helped by robust metal prices. If you strip out metal prices and Cormetech, underlying operating profit was up 13%, powered by a strong showing in Clean Air and by reduced losses in Hydrogen Technologies. Basic earnings per share rose 50% to GBP 1.022, reflecting higher profit, including the higher metal prices. We saw a free cash outflow of GBP 98 million, against a GBP 4 million inflow in the same period a year earlier, and that came from a working capital outflow in our PGM business, which will unwind in the second half. Net debt fell from GBP 880 million at the full year to GBP 831 million, giving a net debt-to-EBITDA ratio of 1.6 x. As Liam said, we are today announcing an interim dividend of GBP 0.227 per share, up 3%, consistent with our commitment to deliver enhanced returns to shareholders. Moving down the income statement from that 32% growth in operating profit. Net finance charges declined from GBP 32 million to GBP 25 million. We had a temporary benefit from higher interest income, driven by receipt of the Catalyst Technologies proceeds, along with increased capitalization of borrowing costs. Those proceeds have now largely been returned to shareholders. There is roughly GBP 130 million of buyback still to go, and as a result, we expect full-year finance charges to build somewhat from the first half, to around GBP 55 million for the full year. Underlying profit before tax grew 47% to GBP 162 million, and the underlying tax charge was GBP 33 million, an effective tax rate of 20.4%; for the full year we expect an effective tax rate of 21%-23%. That is lower than our May guidance of 25%-27%, and it reflects our updated view of the geographical mix of profits, which now favors lower effective tax jurisdictions. Turning now to each of the businesses. Overall sales in Clean Air rose 10% to around GBP 1.2 billion, with two clear growth drivers, both reported in our heavy-duty segment. First, heavy-duty diesel performed strongly, with a rebound in the U.S. Class 8 truck market, as we anticipated in May. Second, we delivered material growth in our Clean Power business. That included solid organic growth in Clean Air Solutions, with sales more than doubling to GBP 59 million, plus a robust two-month contribution of GBP 33 million from Cormetech, as both businesses gained from data center expansions in the U.S. Clean Air's operating profit rose 26%, comfortably ahead of sales growth, and margins went up from 12.4% to 14.2%. The main driver behind profit growth was higher volumes, while commercial and operational discipline offset elevated raw material inflation. We anticipate the sales cycle and operating profit staying strong through the second half, and we're holding to our 2027/2028 guidance of at least GBP 2 billion in revenue with margins of 16%-18%, excluding Cormetech. PGM Services delivered a good first half: sales rose 6% to GBP 239 million, helped by a GBP 20 million benefit from metal prices along with good product sales. Operating profit was up 2% to GBP 68 million, as sales growth was partly offset by process loss provisions and the lower metal recoveries we flagged to you at the full year. First half operating profit came in broadly in line with last year, and we expect the same at the full year. All in all, a solid performance. In Hydrogen Technologies, sales fell 26% to GBP 17 million, mainly on lower volumes of fuel cell components. We expect second half revenue to stay soft. As you know, we intend to run this business at break-even. We posted a small loss of GBP 3 million this half, which is a big improvement on the GBP 18 million loss in the first half of last year. We're still on track for operating profit break-even and positive cash flow this financial year. We keep winning new customer contracts, so we're well-placed to capture market growth when it arrives. Now to cash. As I said earlier, free cash was an outflow of GBP 98 million, versus an inflow of GBP 4 million in the first half of last year. That relates to a working capital buildup in our PGM business. We told you in May about an operational metal loss at our U.S. refinery; in September we carried out an additional stock take confirming those metal losses have now normalized. That meant taking the plant down for three weeks and building stock ahead of time so customers saw no disruption. The plant is running again now, and the working capital build will unwind in the second half. This slide shows the movements that deliver the expected free cash inflow at the full year; we anticipate underlying EBITDA staying strong, and we expect a working capital inflow in the second half as the higher working capital tied to the additional U.S. stock take unwinds. We keep achieving working capital efficiencies thanks to the better inventory processes we discussed back in May. If you look at the remaining bars on the chart, CapEx is still tracking our full-year guidance of roughly GBP 230 million. Putting all of this together, we anticipate that free cash flow for the full year will be better than last year's GBP 168 million. Turning to capital allocation, as you are aware, our capital allocation policy is disciplined and has three distinct priorities. Organic investment comes first, and we expect CapEx to drop significantly as we work through the fit-out and completion of the new refinery in the U.K. Delivering significantly enhanced shareholder returns is our second priority. As Liam said, we have already made solid progress in returning the GBP 1 billion of net proceeds from the Catalyst Technologies sale, which closed in July. We paid out GBP 800 million via a special dividend alongside a share consolidation in August, and our GBP 200 million share buyback is on track, with approximately GBP 72 million of that completed so far. We have also pledged ongoing returns of no less than GBP 200 million respectively this year and beyond, and today we announced a 3% rise in our interim dividend to GBP 0.227 per share. Inorganic investment is our third priority, and there we will consider only highly compelling bolt-on acquisitions within core areas. That said, our attention right now is entirely on integrating Cormetech, which is going well, and Liam will cover more on that shortly. Lastly, we stay focused on reducing our net debt to EBITDA ratio to the target range of 1x — 1.5x, and we expect to reach that by the end of March 2029 as we drive stronger cash generation. I would like to close by updating you on our 2026/2027 profit outlook. First, assuming constant currency and metal prices, and excluding Catalyst Technologies and Cormetech, we now anticipate high single-digit growth in group underlying operating profit. This upgrade from the low to mid-single-digit growth we cited in May reflects our expectations of continued cyclical strength in Clean Air during the second half, operating profit matching last year in PGM Services, and break-even operating profit in Hydrogen Technologies. Second, assuming metal prices and exchange rates stay at current levels, we now expect a GBP 35 million benefit from metal prices, up from GBP 25 million in our prior guidance, along with a GBP 2 million adverse impact from foreign exchange. Third, we expect an operating contribution from Cormetech of approximately GBP 20 million. In closing, we are highly pleased with our first half performance, and it is good to be in a position to raise our full-year operating profit guidance. We know there is more work to do as we concentrate on delivering cost efficiencies and ensuring cash generation through our business transformation. With that, I will pass things back to Liam.

Liam Condon executive
#4

Thanks very much, Alastair. I’ll give you a quick reminder of how our portfolio is shaped as we move ahead. As you’re all aware, platinum group metals and Clean Air remain our two core businesses, and everything is built around them. Over on the right-hand side, you can see what we regard as the growth businesses for the future. The simplest way to view this is that Hydrogen Technologies and PGM products are medium- to long-term growth businesses, while CAS, the Clean Air Solutions in-house piece of stationary emission control for JM, together with Cormetech, will going forward be Clean Power, and that is the part we will break out and report separately. I believe it serves everyone’s interests for us to do so, since it already has critical mass, which we’ll come to, and it is expanding quickly, and it earns a margin that is accretive to the group. I think it matters that you have transparency on that and on what is happening. The crucial point is that, under this model, what we have committed to is a step change in cash transformation, and with that, the ability to ensure sustainable returns to shareholders. That is what you have seen in the first half, and it will carry on going forward. Beyond the portfolio’s shape, I mentioned at the start the transformation that is underway. We have already discussed the portfolio changes, which are really significant. Divesting CT essentially releases all the managerial capacity to concentrate on the core, and the core takes in the new stationary emission control business, because again, emission control is something very close to our heart in any case. In addition, we have been making enormous progress on both the commercial and the operational side. I’ll give a few commercial examples, and they relate to the individual businesses. On the operational side alone, here are a couple of examples. Overall equipment effectiveness has reached 90% in North Macedonia; that is our largest plant worldwide for Clean Air, our biggest business. This is the first time we have managed to hit a metric of this kind. This metric essentially tells you how efficient manufacturing and operations are. It is simply a good sign of progress on the operational front. Likewise, another example in the U.S., in Devon, on one of our lines, thanks to targeted CapEx investments, we have been able to automate a line and raise overall equipment effectiveness there by more than 10%, and this is now the fastest coating line anywhere across JM globally. These are just tangible examples of things that then feed into the results, but they come from a great deal of hard work on the ground and some targeted CapEx investments that we have made over time. On the people and culture side, I was really pleased to see our engagement scores carry on improving. Engagement is usually an early indicator of performance. If your engagement scores are falling, you can typically expect performance to follow in a later period. It is genuinely encouraging to see this number rising, and it has been climbing steadily over the last 2 years. We view that as a very positive indicator; it demonstrates that our workforce is highly engaged, strongly dedicated and deeply committed, and that they wholeheartedly embrace the strategy ahead, even with all the transformation taking place. Johnson Matthey currently has a great deal of change underway. Our net promoter score also mirrors this, since engagement essentially captures the internal sentiment. The NPS, meaning the Net Promoter Score, captures how customers feel about us. Normally, anything above 40 is regarded as quite strong, indeed really strong. Ours has risen to 47, which tells us customers genuinely value what we do. Once more, when both employees and customers are in good shape, positive outcomes usually follow. One last thing worth noting here: thanks to heavy emphasis on succession planning, we have shifted from a position where most of our managerial hiring was in fact going to outside candidates. Through the succession planning we have run now for several years, we have managed to reverse that; roughly 70% of all managerial roles are now filled from within, with 30% coming from outside, and I consider that a far healthier mix. We also have a strong illustration of this present in the room today. You will have noticed that we reported earlier today that our COO, Richard Pike, departs JM at the end of the year. In my view Richard has accomplished wonderful things for us. Richard, I am truly thankful to you for everything you have contributed. I am certain you will achieve even greater things elsewhere, and I wish you the very best with that. At the same time, I am delighted that his successor, Olivier, is here in the room and will become the new COO. Olivier presently serves as Head of Strategy and Corporate Development, and previously was first the Chief Commercial Officer of Clean Air, then the Chief Operating Officer of Clean Air. Much of the steady margin improvement you have witnessed in Clean Air, along with the acquisition of Cormetech, has in a sense come under, well it is not solely Olivier, but it has come under at least his leadership. I believe Richard has helped us truly reset a strong foundation for success ahead, and Olivier will now help build on it so we can speed up progress as we move into the future. Thank you once more, Richard, and warm congratulations to Olivier on that as well. Now, at JM we have 3 key things, focus areas that genuinely matter, and we are absolutely single-minded about getting these right. First is sustaining the robust margin improvement in Clean Air. You will remember that when we began, we were in single-digit margin territory. We stated that we would reach 16%-18% by 2027, 2028. That work is still ongoing. Let me speak about that for a moment. Handling the shift at the PGM refinery. We're constructing a brand-new, state-of-the-art refinery right here in the U.K., so handling that shift matters a great deal. Number three is that we have a tremendous growth opportunity in stationary emission control, through our new Clean Power business. Getting that business positioned to succeed is the third item. If you ask what JM's top priorities are, what must we get right? These three items are the ones that will make a material difference. On the first, Clean Air, that margin improvement is going to keep going. In the first half you've seen an increase of 180 basis points, taking the margin to 14.2%. A further increase will come in the second half, which then puts us in the landing zone of 16%-18% for the following year. Where within that 16%-18% we land depends more on volume, on what's happening in the market, but without a doubt we will land inside that zone. The only question is which part of the zone we land in. There are various elements to how we get there.

Liam Condon executive
#5

Most of this, apart from volumes, is largely within our control—and volumes decide where within the range we end up, not whether we end up in it. We keep reducing overhead, depending on market conditions. You have seen overheads in Clean Air go up further or come down further, and that is helping. A great deal is going on commercially, and I gave examples earlier on the operational excellence side. Meanwhile, on the commercial front, we have won, to give just one example, 11 hybrid platforms over the last 18 months, and that amounts to at least 25% of the forecast hybrid market from 2028 to 2029 onward. That 25% is well above our market share in the light-duty segment. We are punching above our weight there, and we manage that because we are competitive on both technology and cost, thanks to strong collaboration among R&D, operations, and the commercial team. That progress will carry on. The last major lever in our armory as we move ahead is footprint consolidation. We have done a great deal already, but depending on how quickly the market develops, there will be more footprint consolidation. If volume decline comes faster, footprint consolidation will come faster. If it is slower or, as this year, not happening, then footprint consolidation will be slower. That gives us a lever we can move, essentially letting us breathe at the market's pace; we remain very much on track for that 16%-18% by 2027 to 2028. Turning to PGMs, let me first discuss the 3CR and the new refinery we are building in Royston. Early-stage commissioning already began this year. I mean, this is a large, complex CapEx project. To give you a sense, it needs something like over 50,000 m of piping installed. It is a fairly complex build-out. We have actually made tremendous progress so far. 98% of the equipment needed to run this plant has been delivered. 90% has been installed. Of the electrical equipment infrastructure, 100% has been installed. Of the electric cabling, 90% is installed. Of the metallic pipework, over 80% is already installed. There is a lot of progress here, and as we get further and further and further into the detail of this build-out, the engineers keep refining the approach and trying to work out the best overall balance for how we run this plant going forward, to make sure it is optimal when running at full capacity going forward. What the engineers have told us is, "Look, we have planned a metal-by-metal startup, and we have a certain timeframe allocated for each metal to start up, and then we will have the full ramp-up." Originally, we were saying that in calendar year 2027, we will have that full ramp-up. The engineers are essentially telling us that if we give this a few more months, the plant will operate better once it's at full capacity and from then on. So we'd rather shift that to 2028, early 2028. To be clear, we mean a few months and nothing beyond that; in my view, when we have these conversations, there are two guardrails around this discussion. The first is, at the level of business continuity overall, can we keep delivering products to our customers? That is completely assured, since we have the existing refinery where we've been doing some limited targeted CapEx, and also investments in people; we know it will run for as long as we need it. Business continuity is fully ensured. The second guardrail, which matters enormously, is that everything stays within the bounds of our financial guidance, both for platinum group metals and for the group. None of these changes has any effect at all on our financial guidance or on our capacity to generate no less than GBP 250 million in free cash flow and no less than GBP 200 million of returns to shareholders annually. It's with that in mind that we consider this acceptable, or in fact the better and smarter course of action: to push this date out a little and have it running properly and in an improved way compared with sticking to what was identified or flagged as the original timeline. That's the situation on 3CR. A great deal of attention is going into it. Management devotes considerable time to this one. Given where we stand at this moment, we feel very confident about the build-out. We've carried out a lot of assurance on the process. On the whole, I believe this is heading in absolutely the right direction with some fine-tuning, which is what you'd expect on a project this large as we proceed. The key point is that it has no effect on business continuity and no effect on financial returns. The final item I want to cover is Clean Power. This is the new business segment. Once again, it's Cormetech plus Clean Air Solutions. Just a bit of background on this again, such as what is driving demand. At present, the hotspot is, naturally, data centers in the U.S. That has greatly accelerated demand for our products. What you see on the left side are some statistics concerning demand for gas and coal. It's mainly a gas market; in the U.S., gas is plentiful and inexpensive. Coal is declining, yet it remains. As you can see, demand for gas and coal has a CAGR of 13% to 2030, and it's estimated that 50% of the energy supply will be gas and coal going forward. All of that gas and coal needs emission control, and that's the segment we're leaning into. As a reminder, our product. What do we have with Cormetech? What do we have with Clean Air Solutions? So with Cormetech, the main emphasis is really on gas turbines and gas engines — so, really large engines — and catalyst systems that ensure the air stays clean while those systems operate. As for Clean Air Solutions, the bigger emphasis was on diesel backup power generators. Every plant needs backup power generation. A data center can't ever go down, so whenever you install any form of energy, you always have a backup supply, and that's usually where JM focuses its efforts. Bringing the two together essentially means we unite emission control across primary power generation and secondary backup power generation within a single company. Because of that, we're able to offer customers something more complete, and we've already seen the advantages — in fact, we had our first joint sale after just two months. Honestly speaking, we hadn't planned on any commercial synergies during the initial phase. Our focus was more on the hard, cost-related type of synergies. Commercial synergies weren't part of the plan, yet the offering is so compelling that we've already closed a first joint offering. Essentially, a Cormetech SCR customer also purchased a JM oxidation catalyst. To me, that's a good sign of plenty more to come.

Liam Condon executive
#6

Two months in, this business is doing extremely well. Olivier and I actually disagree on this point, but after roughly half a year of due diligence on Cormetech, we were skeptical of how bullish their projections seemed, so we trimmed the original base case — yet it turns out those numbers are entirely genuine. Only two months have passed and we already find ourselves needing to lift our forecast for this business, moving away from our earlier figure of GBP 200 million covering Cormetech plus Catalyst Technologies combined — bearing in mind that Cormetech contributes just eight months of sales rather than a full twelve. We're lifting that to a minimum of GBP 250 million — and I really want to emphasize the floor of GBP 250 million — with an operating margin of no less than mid-teens. Once more, that adds to the group margin. It's already fairly substantial, fairly meaningful today, and expanding at a very fast clip, so that gives you a picture of what lies ahead. The integration process is progressing nicely. An integrated management team is already in place. Every work stream remains on schedule. Take procurement synergies — they look very compelling early on. For instance, with platinum group metals, our ability to lock in the correct price for PGMs and guarantee sufficient supply is far stronger than what Cormetech could achieve independently. Take tungsten, for example—a key metal used in many of these products—where prices have climbed roughly fourfold during the past year. The point is that as a group we can source it far more effectively than we ever could as a single small company. And since we've thankfully become increasingly commercially savvy, we're able to pass those costs along to customers anyway, and we're making strong progress on that front. I mentioned our first joint win; effectively, we now have contracts with every major player. I left this off the slide because I wasn't certain how it would be received overnight, but Anthropic is on that list as well. Our order book extends through 2028, and we're also in the process of upgrading. At first, we mentioned GBP 300 million. As of now, it stands at GBP 350 million and rising; that covers through March. This relates to Cormetech, out to March 2028. And naturally, people always ask how solid that figure really is. To give you some idea, consider a data center under construction: there's enormous spending on the data center itself, and then substantial spending on a gas turbine or engine to supply behind-the-meter power, since waiting for a grid connection takes far too long. Our piece is installed only at that later stage, once all the major capital expenditure has already taken place. At that point our product is delivered—and without it, no permit to operate the data center can be obtained. That makes it a crucial factor. Overall, this GBP 350 million in business consists mainly of very solid orders, usually backed by down payments, and substantial ones at that. To date, not a single cancellation or postponement has occurred. In fact, it is the opposite: on the capacity side, we have actually had to turn customers away. Demand for compute and for more data centers is what's keeping this market extremely hot at the moment. That's certainly a topic we can explore in more depth when we get to the Q&A. As things stand today, though, I'd describe it as a very strong development. Let me offer one more data point, an extra reference point, before I move on. On the question of how solid these orders really are: at Cormetech last week, we booked an order slated for delivery in 2029 — so it sits outside this GBP 350 million — and it came with a 70% cash down payment paid right now. Just consider that. So that shows you just how strong the demand really is, and what customers will pay to get hold of our products, which matter a great deal; so there's plenty to look forward to on that front. We're going to hold a mini capital markets day alongside the next full-year results in May. We'll break it all out for you. We'll give you plenty of detail on it; but I just want to make the point that this is very real, and it's already very material. So, to close, we essentially made a good number of commitments, and really, all we're doing is delivering on them. So that's the pattern you observe every six months — we keep checking items off the list as we move forward. Now and then we need to make small tweaks, for instance to the refinery's schedule. Still, of all the milestones we laid out looking toward 2027 to 2028, more than half are already achieved. As for the remainder, you can be fully confident that come 2027 to 2028, every one of those milestones will have been met too. Essentially, we're delivering exactly what we promised. And one last thing, to repeat the point: our 2027 to 2028 commitments remain very much on track. Let me remind everyone that the mid-single-digit CAGR and pro forma operating profit figures were set at the constant metal price in place when we first flagged this. So naturally, on a reported basis, that pricing element has to be added back. And none of this, of course, factors in Cormetech. So come May, we'll be providing revised midterm guidance. Rest assured, we will definitely deliver on what we've already committed to, but at that point we'll issue updated midterm guidance going forward that will also capture the impact of Clean Power and Cormetech, along with wherever pricing stands at that time. The key thing to focus on is the cash returns of at least GBP 200 million you'll see this year and next year, and they'll just continue. That "at least" is significant—it's a floor, not a ceiling. I think grasping that point is important; that's basically the entire point. We're delivering on what we promised. Now, before we take questions for the GTA fans, we'd like to offer a small reward for attending in person and to everyone watching online as well. After the CT divestment, we essentially updated things. Our company purpose has been updated to capture what genuinely sets Johnson Matthey apart, and platinum group metals sit at the heart of it—the tagline now reads "Metals that matter." One thing I believe is worth really understanding—we spend a lot of time on the financials in this forum, but as an investor in JM, you're contributing to positive change in the world. We truly assist in tackling some very significant challenges, and that is meaningful for our employees, meaningful for our customers, and in my view it should be meaningful for investors as well. We are not a danger to humanity's future, just to be clear about it. This is a business engaged in worthwhile work, and people ought to take pride in that.

Liam Condon executive
#7

We aim to get that down in a quite brief video, and after that we'll move on to Q&A.

Executive executive
#8

< >

Liam Condon executive
#9

Oh, thank you very much. Sorry.

Louise Curran executive
#10

Many thanks to Liam and Alastair for that presentation. Questions will start with those of you here in the room, and for anyone watching via the webcast, you can send a question in through that channel too. There are two microphones, so once one reaches you, kindly state your name and where you are from. We will begin with questions from the room. Ranulf, we will start with you.

Ranulf Orr analyst
#11

Thanks. Hi, Ranulf from Citi. To begin with, I have three questions about PGM Services, if that's alright. On the 3CR delay, it seems quite late in the process to be discovering that another couple of months are needed. I didn't really grasp the explanation, so maybe you could say a bit more about that, and also what it implies for the CapEx required and the timing there. Second, I'd be interested in your thoughts on the longer-term outlook and the durability of earnings from the minor metals, ruthenium and iridium, and perhaps particularly viewed through the lens of lower core PGM volumes in a declining ICE market. Lastly, I'd like to get a clearer picture of the half-on-half earnings bridge in PGM Services, especially given the step-up that's required. Thank you.

Liam Condon executive
#12

Okay. Thanks very much, Ranulf, and thank you for your report overnight too. It's extremely helpful. I'll begin with the first item, which Alastair may want to add to, and I'll start on the minor metals and the long term, and Alastair can cover the half-on-half. In one sense, you might see this as coming late in the day, but frankly, this is such an enormous project. There are many moving parts, many engineers are working on it, and they keep refining the approach. We could take the route of holding to our original plan, but doing so would essentially leave the plant running less effectively than if we adjust things somewhat as we move forward. That captures what the team is telling us. Would that mean extra CapEx? Likely a modest amount of additional CapEx, though again, it wouldn't affect any financial guidance in any way, since we have plenty of levers that will naturally offset it. On the financial side, there's no difference. From a business continuity standpoint, there's no difference either. The key point is that once everything is fully operational, it has to perform at the highest possible standard, and that's simply what the engineers recommend. That's the straightforward context for that item. Regarding the minor metals—iridium, and especially iridium, along with ruthenium—demand has been extremely strong; we refer to them as minor metals since their volumes are even smaller than those of the other PGMs. I sometimes like to use iridium as an illustration: the entire world's supply of iridium would likely fit inside three or four suitcases placed in a car's trunk; it's that tiny when you compare it with something like copper or gold, where you have countless tons of the material. The use of troy ounces as our unit of measure is deliberate. Demand has been especially strong, driven by a growing number of applications tied to AI — largely in data storage and, to some extent, data transmission. Because the volumes involved are so small, even a modest rise in demand naturally produces an outsized effect on pricing. In our view, this reflects a structural change in demand, since no matter which government is in power, the push toward more compute and more electrification will happen as a matter of structural necessity. Exactly where and how fast that occurs could differ, but occur it will. We do believe this is a positive sign for the future of the minor metals; in our view, platinum will stay very robust ahead from an industrial demand standpoint. The larger uncertainty concerns palladium and rhodium. As ICE volumes fall, will new use cases emerge to absorb any surplus supply? That is a fact. That is also something we are working on alongside others, through an R&D alliance, examining new applications for those PGMs. That, just for reference, and perhaps split half and half, Alastair.

Alastair Judge executive
#13

Right. So keep in mind that during the second half of FY 2026, the U.S. refinery stock take was coming down. My way of looking at it is that this year we face a modest headwind in H1, since we're setting aside larger provisions for metal losses. Once you move into H2, you'd anticipate those somewhat elevated provision levels carrying on, yet the large one-off hit we took at the close of FY 2026 won't recur, and that's the reason you see the half-on-half rebalancing.

Louise Curran executive
#14

Thanks, Ranulf. I believe we'll move on to Tristan now, assuming there's a mic available. Appreciate it.

Tristan Lamotte analyst
#15

Hello, thank you. This is Tristan Lamotte with Deutsche Bank. I have two questions, if I may. The first one concerns PGM too. I was reviewing the figures and noticed with interest that the margin came in at 28% for H1, with sales of roughly GBP 240 million. Historically, when sales were at a similar level, the margin was closer to 37%. So I'm curious whether some portion of that reflects a temporary effect or under-earning in that regard. My second question also relates to the minor metals. I'm wondering whether you could increase output, since that sounds quite restricted, and demand is likely to rise substantially. Related to that, your peer Umicore is active in other minor metals that are performing strongly, such as germanium, tungsten, and antimony. I'm wondering whether that is an area you consider a logical bolt-on.

Liam Condon executive
#16

Mm-hmm. Thank you, Tristan, also for your report and for having us at your house today. Alastair, perhaps you could handle the first one about the PGM margin, and I'll take the second.

Alastair Judge executive
#17

Right. First-half margins are being held back by when metal recoveries land, something we discussed back in May, so fewer of those one-off metal recoveries are coming out of the refinery during this stretch. On top of that, there are the larger loss provisions we booked following the U.S. stock take we did in May. Looking ahead, I think we'll have the findings of that U.S. stock take in January and February, and that should give us a far clearer picture of where things stand there and whether those provisions can be brought down. And then, clearly, the timing of metal recoveries is always going to be uneven in how it phases, especially as we move through shutting down the old refinery in the U.K. and work out how and when we actually manage that.

Liam Condon executive
#18

Thanks, Alastair. Regarding the minor metals, I believe it's worth pointing out that they come as byproducts of other operations, usually platinum and at times chrome. From a mining standpoint, the great majority of that output originates in South Africa. Naturally, we collaborate closely with the miners, and whatever activities they undertake and whatever output they generate, we are able to refine on their behalf. The key point is that we rely on them as our primary supply source. So when you mention raising supply, that decision would rest with the miners. As you're aware, capital expenditure on the mining side is generally very long term, which means they can't truly make adjustments over the very short term in response to any demand increase. Their thinking tends to span generations rather than short-term CapEx cycles. What matters, though, is that we are the largest recycler globally. The bulk of our output, more than 70% of what we'd produce, comes from recycling, so it isn't reliant on, or purely reliant on, supply from mining. And we recycle to the maximum extent we can, especially in light of the particularly elevated prices right now, which we clearly gain from. On the matter of other metals and our interest, our core competence, and we've put substantial work into this, is really our grasp of chemical properties, our capacity to manufacture, and our capacity to recycle PGMs. That is where we operate at a world-class level. And we believe there are sufficient exciting markets for us to pursue on the strength of that competence. So we aren't considering adding further metals to our portfolio at this moment. We feel we already have enough irons in the fire with what we hold.

Louise Curran executive
#19

Thanks, Tristan. Maybe move along the row to Sebastian.

Sebastian Bray analyst
#20

Thanks. It's Sebastian Bray from Berenberg Bank. I've got a few questions, please, and I'll take them one at a time. Could this U.S. refinery stock take exercise end up producing some kind of announcement at next year's full-year results, along the lines of, "We need GBP 100 million to fix and repair/rebuild part of the refinery"? That's my first question.

Alastair Judge executive
#21

No. Look, as we said back in May, we've put things in place and we've checked all the protocols for how we manage it. Our thinking is that we simply need to verify everything is working exactly as expected so we avoid any surprises; the results will come in January, February; we're very confident that it will in fact just reinforce our view that the refinery is now working as expected, and we'll confirm that as the results come through.

Sebastian Bray analyst
#22

Thanks. For my second question, I'd like to ask about the financials regarding underlying tax and interest charges starting in FY 2028, which is the next fiscal year. Should we now take the underlying tax rate as 23%, with financial charges of roughly GBP 60 million for JM? Would that be a fair assumption, or not?

Alastair Judge executive
#23

Yes, our guidance, I believe, has been 21%-23%. Precisely where the geographic mix lands will have some bearing on it. So it's certainly lower than what we stated at the full year. And on interest, yes, I'd say that's probably about the right place to think about it.

Sebastian Bray analyst
#24

Regarding the Clean Air segment, has Euro 7 already been included in the figures, or does it still lie ahead? I understand it's not as significant an event as Euro 6 was, but can any uplift from it be seen in what JM has reported in H1 2027?

Liam Condon executive
#25

No. Yeah, go ahead.

Alastair Judge executive
#26

Yes.

Liam Condon executive
#27

No, in practice Euro 7 isn't included in the figures at this stage. So that's more a matter for the future, something we'd anticipate, but at present it isn't part of any of those numbers.

Sebastian Bray analyst
#28

That is useful. One last question about Cormetech and its share of the market. Right now, is this roughly a 50% market share business for the applications that matter in the U.S.? And as I think about modeling this business, the reason some U.S. investors get worried about the hyper-scale CapEx cycle is that its growth rate begins to slow sharply from 2028. I don't know what forecast horizon was shown in the business plan at the time you acquired this business, but is there any point where sales top out and then fall after 2030, or does it just keep growing forever?

Liam Condon executive
#29

Go ahead.

Alastair Judge executive
#30

Yes. At some point, new sales are going to level out, Sebastian. Keep in mind, I believe we mentioned this in May, that one of the strengths of this business is that there's an aftermarket component here. When the catalysts come in, we have to service them, and then on a regular basis we have to replace those catalysts. I think what we expect for the business is that eventually new installations will slow down, right? Then you begin to pick up the repeat catalyst replacement for the data centers that are already running; that's in our model, and we'll share more on that when we sort of walk through this in May.

Liam Condon executive
#31

I might add a bit to that. First, regarding market share, it stands at a minimum of 50%, so it's likely — I think you could view it in a way similar to heavy-duty diesel, where our truck market shares in the U.S. are exceptionally high. That's the sort of position we hold in the U.S. within this space. As for the business outlook going forward, there's naturally plenty of discussion about demand softening or leveling off at some point. The reality is that the order book, as you mentioned, extending to 2028 is crystal clear. I'd call that bankable; we have an order book growing significantly through 2030 and beyond, which we'll discuss further in May. From where we sit, we're still a good way off from that plateau. Things will undoubtedly change somewhat in the market as events unfold. But take what's happening in Texas right now as a concrete illustration — there's a new Democratic governor there, and Texas is hugely important for data centers. This new governor isn't declaring, "No more data centers." What this new governor is proposing is, "Let's look at a moratorium on future construction, not on projects already being built." That runs through 2028, which is why those sales are protected. Beyond 2028, the story isn't that data centers stop entirely. This comes down to making sure those data centers are constructed in a manner that brings communities into the process, avoids driving energy costs higher, keeps air quality at acceptable levels, and prevents nearby residents from being harmed by these facilities. That concern is entirely legitimate. And frankly, we belong on the solution side of it, since the unavoidable consequence here is that drawing power off the grid produces an increase — a spike — in pricing. So without question, demand will grow substantially for behind-the-meter, on-site generation; that covers gas turbines, gas engines, and diesel backup engines, and every one of them needs emission control. In our view, that direction is unavoidable. Some forecasts suggest that on-site, behind-the-meter generation currently covers 4% of data center demand, and that figure is expected to rise to 40% — specifically as a way to avoid pushing local energy prices higher. All of it must include emission controls, since without them operators won't receive permits to run. From the public's perspective, I believe those worries are valid, yet we don't view this as something that blocks the business. In fact, it could even work in our favor, since more engines will be needed along with additional air quality control requirements.

Louise Curran executive
#32

Thanks, Sebastian. Alex is with us, so if you could just hold on a moment for the mic. Appreciate it.

Alex O'Hanlon analyst
#33

Thanks a lot for taking my questions. I've got three of them. It's Alex O'Hanlon from Panmure Liberum. First off, it's great to see Cormetech performing so strongly. If you keep delivering the way you have been, does that suggest you'll probably need to pay out the earn-out tied to the acquisition you completed? I can ask them one at a time, or just put them all out there together, whichever works better for you.

Liam Condon executive
#34

Just ask them all together, and then we'll respond to that, Alex.

Alex O'Hanlon analyst
#35

All right. Then the second thing: I believe at some point you provided a bit of detail regarding how much sits in the order book tied to the GBP 2 billion of Clean Air sales for 2028. I was simply curious about how that is progressing. My last question concerns the overall equipment effectiveness you brought up, Liam, along with the gains you have achieved on that front. I was just wondering how that is in fact defined, or how you go about calculating it. A little more detail on that would be helpful.

Liam Condon executive
#36

Would you like to? Regarding the earn-out?

Alastair Judge executive
#37

Right, so regarding the earn-out, you'll notice in the accounts that we've recognized a portion of it in H1, reflecting the strength that's coming through as well as our capacity to actually deliver more than we initially expected. We'll be reassessing that going forward. But right now, I think we feel quite comfortable that part of the earn-out will be paid, and we'll evaluate the remainder as the business develops.

Liam Condon executive
#38

Right. Regarding Clean Air, we remain very much on track with the GBP 2 billion guidance we provided for 2027 to 2028 for Clean Air. What matters there is that this figure includes Clean Air Solutions as it stands today. So, as we've said, we'll carve that piece out going forward, we'll break it out, and we'll be very transparent about how the numbers kind of adapt going forward. But as of today we are very much on track for that number; on OEE, I don't know whether Richard or Olivier wants to jump in on this one, but basically we use industry standard metrics, along with quality and performance. It's a function of kind of three components, all of which are measured against the industry bench. It isn't something specific to JM. It's an industry benchmark, and reaching a level of 90% is, particularly given where we were coming from, an exceptionally good result. But it's an industry benchmark and not a JM benchmark.

Alex O'Hanlon analyst
#39

Perfect, thank you.

Louise Curran executive
#40

Thanks, Alex. We'll now turn to questions coming in from the webcast, and we'll return to the room at the end. Our first question comes from Wenyan Fei at Millennium, and it's about hedging. Could you please share a little on the PGM, how much is hedged, and around the timing of that?

Alastair Judge executive
#41

Right, so we sell forward the refinery gains we expect, in places where a liquid market exists. For platinum and palladium specifically, we'll have sold essentially all of H2's volumes, and a substantial portion of volumes into FY 2028 will also have been sold. Rhodium behaves in much the same way. When it comes to iridium and ruthenium, the market is very illiquid, which means for those two metals we're far more tied to existing spot rates and the way they move.

Louise Curran executive
#42

Cool, thanks. Our next webcast question comes from Thomas Streater at Streater Research. Your Clean Power business delivers strong growth, but assuming the diesel and gasoline auto cat business shrinks over time, how do you generate growth from those automotive customers? And just to add a note on the sort of dynamics they're seeing in terms of the EV market within that as well.

Liam Condon executive
#43

Right, thanks. So Clean Power is definitely going to expand. When you look at JM's portfolio, understanding its shape really matters. Heavy-duty diesel in this half is already the largest segment, helped along by a cyclical upturn in the U.S. But from an internal combustion standpoint, that market is projected to expand at a very low single digit CAGR across the coming 10 years. So it isn't a market in decline. It's one where our shares are exceptionally high and profitability is very strong, and it isn't shrinking. That's our foundation, and it's important to grasp that point. As time goes on, it will matter even more. In light-duty diesel we also hold very strong market shares. Electrification will push that segment down. The pace of decline will differ by region. We still see some growth in the U.S; we see growth in the southern hemisphere too, in places like India, Latin America, Asia. As economies expand, there's typically a lot of vans and deliveries and so on. In those kinds of geographies, these tend to run on diesel. In China, the ICE market is contracting fastest because of electrification; so the pace varies a lot. In light duty diesel we'll hold our market share, and from a volume standpoint we'll decline broadly in line with the market. Light-duty gasoline is the smallest part of our portfolio, roughly 15% market share. The good news there is that you don't have that much to lose; but since we concentrate so heavily on diesel, we decided to focus only on specific segments within light duty gasoline going forward. There we've doubled down on hybrids, as I said earlier; given that we've won 11 platforms on the hybrid side that start contributing from 2028 to 2029 onwards, we'll see an inflection point there. We'll actually grow along with that market going forward. So it's a very differentiated picture. Once again, heavy-duty diesel is our core strength, and we'll grow in selected parts of the light duty business. Beyond whatever happens on the volume side, we have enormous levers, as we've said, already via footprint consolidation, overhead reduction, commercial and operational excellence, to make sure that regardless of what happens on the volume side, we deliver strong profitability and cash return on this position for a very long time.

Louise Curran executive
#44

Thank you, Liam. I believe that covers everything from the webcast questions. We'll do one last check to see if anyone else in the room has a question. Ranulf, perhaps hold on for a microphone from Heather on this side. Thanks.

Ranulf Orr analyst
#45

Thank you. I appreciate your taking the follow-ups. Actually, just two. First, on Cormetech and, sort of, what we should expect for CapEx and what work you need to do there. Can you make better use of some of that old HDD capacity? How are you working through the capacity constraints?

Liam Condon executive
#46

Yeah.

Ranulf Orr analyst
#47

And then second, regarding working capital and cash flow. You mentioned some about building inventory and similar things before the shutdown, but my sense is that a GBP 200 million outflow in payables was the real drag on free cash flow. So I'd just like to get a better handle on that. Thanks.

Liam Condon executive
#48

Thank you, Ranulf. I'll have a go at the CapEx piece, Alastair can chime in, and then Alastair, you covered cash and working capital. Our view of Cormetech and Clean Air Solutions is that this is genuinely a CapEx-light business, since we already have substantial manufacturing infrastructure. What they need on the capacity side is additional machinery rather than new buildings or expanded sites. Manufacturing capacity is not something we lack. Occasionally we may need to purchase additional dryers, additional machines that are essentially used to make our products. Set against something like a PGM, or Clean Air in the past, this is a fairly modest CapEx investment; we would give an update at full year in May on whatever the capital requirements turn out to be, but my expectation is that this will be a CapEx-light business. There will certainly be synergies with the JM footprint. The CAS, the Clean Air Solutions products, are currently made at certain sites that have been more focused on heavy-duty truck engines. We can adjust some capacity at those sites and reconfigure part of our manufacturing setup so that we simply produce more capacity for this growth business. On the clean power side, I would expect the CapEx to be pretty easily digestible.

Alastair Judge executive
#49

Yes, regarding accounts payable — we move a significant volume of precious metals through AP, and those typically carry very short payment windows. Even a slight shift in the number of days before you pay can have a sizable effect on AP. In fact, when you're doing a stock take, some of your AP terms get affected by that as well, or at minimum the timing of AP does. I'd say it reflects both the amount of AP flowing through and the precise timing around the PGMs.

Louise Curran executive
#50

Thanks, Ranulf. Sebastian?

Sebastian Bray analyst
#51

Thank you. I'd like to follow up on the health business write-down, since it was the largest non-cash adjusting item in the P&L during the first half. I understand the business may have encountered some headwinds, which explains why the choice was made to impair the equity component. It appears the vendor note that Johnson Matthey lent to the company has been written off. Is this simply a matter of capital structure seniority, or what exactly is happening there?

Alastair Judge executive
#52

Yes. When we sold the business in 2021, a number of parameters were put in place. Given how the business is doing at present and how confident we are about earning a return on the equity as well as the loan note, there are, from an accounting standpoint, questions we find difficult to answer as a minority shareholder. We've reviewed where we rank in seniority, and overall we've concluded that the cautious approach is to take a writedown. We'll stay a shareholder. The loan notes stay valid, and should the business return to its majority owners, we would clearly receive a payout. Right now we see a substantial exposure there, and the numbers no longer support carrying that asset at its prior balance-sheet value.

Louise Curran executive
#53

Is there anything else from anyone here before we finish up? Seems we’re all set. Thanks so much to all of you for being here. And thank you to everyone on the webcast as well; we hope to see as many of you as we can during the roadshows in the days ahead. Thanks again.

Ranulf Orr analyst
#54

Thanks a lot, folks.

Liam Condon executive
#55

Thank you.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Johnson Matthey Plc transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to Johnson Matthey Plc earnings transcripts and 132,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.