Home / Transcripts / MP Materials Corp. (MP) · May 7, 2026

MP Materials Corp. (MP) Earnings Call Transcript & Summary

May 7, 2026

New York Stock Exchange US Materials Metals and Mining earnings 58 min

What were the key takeaways from MP Materials Corp.'s May 7, 2026 earnings call?

In Q1 2026, MP Materials Corp. reported revenue of $132.9 million, a 28% sequential increase, driven by record NPR oxide sales and improved market pricing. Adjusted EBITDA was $36.6 million, with adjusted diluted EPS of $0.03, compared to a loss of $0.12 in the prior year. Management maintained a positive outlook, expecting continued growth in the second quarter and beyond, particularly in the magnetics segment, while signaling a potential decline in PPA income from stockpiled concentrate.

What topics did MP Materials Corp. cover?

What were MP Materials Corp.'s May 7, 2026 results?

MP Materials is positioned well for growth, supported by strong partnerships and a robust cash position. However, investors should monitor the ramp-up challenges in the magnetics segment and the potential impact of supply chain constraints on future production. The company's ability to navigate these challenges will be critical for sustaining its growth trajectory.

Earnings Call Speaker Segments

Martin Sheehan executive
#1

Thanks, operator, and good afternoon to all of you. It's a pleasure to welcome everyone to MP Materials' First Quarter 2026 Earnings Conference Call. Joining me on today's call from MP Materials are Jim Litinsky, our Founder, Chairman and Chief Executive Officer; Michael Rosenthal, our Founder and Chief Operating Officer; and Ryan Corbett, our Chief Financial Officer. Please keep in mind that our discussion today will include forward-looking statements about future events and expectations, which rest on a variety of assumptions and caveats. Factors that could lead the company's actual results to differ materially from those statements appear in today's presentation, the earnings release, and our SEC filings. Additionally, this presentation contains certain non-GAAP financial measures. You can find reconciliations to the most directly comparable GAAP financial measures in today's earnings release as well as the appendix to today's presentation. Whenever we refer during our discussion to EBITDA, that means adjusted EBITDA, and when we say tons, we mean metric tons. Last, both the earnings release and the slide presentation can be accessed on our website. With that, I'll hand things over to Jim. Jim?

Jim Litinsky executive
#2

Thanks, Martin, and I appreciate everyone being here today. Coming off an exceptionally robust 2025, that forward motion continued into 2026, as we posted strong operational and financial results throughout our platform during the quarter. Scaling and disciplined execution remain our focus; within Materials, the team achieved a record 917 metric tons of NPR oxide, which is up 63% versus the prior year and 28% quarter-over-quarter. Shipments also started initially to the newest U.S. customer we mentioned last quarter, which pushed total NDPR oxide sales to 1,006 metric tons, over twice the level of a year ago and 79% above Q4. One of our best concentrate quarters was also delivered, with slightly less than 13,000 metric tons of REO produced, representing a 6% rise from a year earlier and our strongest first-quarter output ever. Crucially, Michael and the team keep achieving meaningful advances on the heavy rare earth separation circuit, which should start commissioning in the second quarter; at the same time, we made substantial headway on the engineering design for the recycling circuit that supports our Apple agreement, one more important move toward a differentiated closed-loop supply chain. More information on these and other projects will come from Michael soon. Robust sales volumes, better market pricing and the PPA agreement together yielded $114.5 million in materials segment revenue and PPA income, roughly twice last year's first quarter, and produced $36.7 million in segment adjusted EBITDA for the quarter. Now to our Magnetics division. Steady progress continues as we commission commercial production equipment. Customer specifications are being met on magnetic performance, and our focus stays on ramping core processes alongside Precision. From that base, we are moving through customer validation prior to full production. At the same time, we recently broke ground on 10x, and every element of that project is being pushed forward with urgency. Using the hard-won knowledge gained from building, commissioning and operating at independents, we are confident about moving more quickly and executing more effectively as this platform scales. Given proven partners and complete Department of War backing, construction activity should speed up over the course of the year, and updates will be shared as things develop. Financially, as mentioned last quarter, a $32 million Apple prepayment arrived in February, which lifted total Apple prepayments to $72 million. In addition, magnetic precursor production and independence generated $21.1 million in magnetic segment revenue and $9.6 million in segment adjusted EBITDA for the quarter. All told, we have begun what should be a pivotal year on a strong footing, with policy tailwinds and ongoing urgency surrounding onshoring and supply chain security, we are pushing our platform ahead with momentum, executing in a disciplined way and delivering sustainable financial results. I'll now hand things to Ryan for a short review of the quarter's financial and operating metrics. Ryan?

Ryan Corbett executive
#3

Appreciate that, Jim. Looking at things on a consolidated basis, revenue plus PPA income came in at $132.9 million for the company, which works out to a 28% increase over the fourth quarter sequentially, and adjusted EBITDA was $36.6 million. What drove these results were record sales volumes for NPR oxide, along with better market prices and PPA income; those same factors pushed adjusted diluted EPS to $0.03 per share, versus a loss of $0.12 per share back in the first quarter a year ago. Sequentially, adjusted EBITDA came down slightly, mostly because of how PPA income was composed in the earlier quarter. At March 31, we held roughly 815 tons of NDPR oxide and metal either in transit, at toll processors, or awaiting shipment. On the pricing side, the majority of contracts still price off prevailing NDPR market prices with about a 1-quarter lag, and shipment timing creates some puts and takes. Given how we currently see sales mix and timing, we anticipate second quarter realized pricing landing in the low to mid-90s per kilogram, with the PPA agreement largely covering any gap between what we realize and the $110 per kilogram floor. Since concentrate production available to stockpile keeps shrinking as our midstream operations continue ramping, and NPR market prices stay near or above that $110 per kilogram floor, we don't anticipate generating a material amount of PPA income from stockpiled concentrate over the quarters ahead. Now on to magnetics. As Jim mentioned, this segment turned in another strong quarter on both revenue and EBITDA. That leaves roughly $62 million in prepaid revenue still to be earned from magnetic precursor products across the next 4 quarters, declining modestly each quarter. After this prepayment is fully recognized, we would stop producing those products for external sale, and instead direct metal production capacity toward what we need to manufacture and deliver finished magnets. Our expectation for initial magnet revenue remains the second half of 2026, starting with modest deliveries as capacity builds over the several quarters that follow. Financials will move around quarter-to-quarter due to the eventual roll-off of precursor product deliveries, the early scaling of magnet production, the timing of certain product testing milestones at our customer, and near-term investments in our team and product development capabilities. We're laying the groundwork for scaled manufacturing and strong financial results from our marquee contracts with GM, Apple and the Department of War. We're still very pleased with the team's progress and with the substantial strategic and financial opportunity in Magnetics, where our scaled vertical platform truly sets us apart. Turning to cash flow. CapEx for the quarter totaled $77.4 million, with roughly 60% tied to the Magnetic segment. Second quarter CapEx will rise meaningfully now that we've acquired the 10x site, broken ground and are speeding up construction; our full year CapEx expectation remains $500 million to $600 million. And finally, at the close of the quarter, cash plus short-term investments held on our balance sheet came to $1.7 billion. Combined with robust cash flow from operations, that gives us complete funding for our long-term capital plan and keeps our fortress balance sheet intact. So with that, I'll hand things over to Michael. Michael?

Michael Rosenthal executive
#4

Thank you, Ryan. As we talked about, we turned in a strong quarter of output at Mountain Pass, with recovery and grade of concentrate both doing especially well. That result is notable even while we keep trying out new methods and working across various parts of our ore body. What we're learning from this work is giving us useful information that shapes how we refine operations, and we're excited about the chance to turn that knowledge into lasting gains in performance; on the midstream side, improvements we made to processes earlier helped drive robust NDPR output this quarter. It's also worth noting that we see considerable room to get better in roasting, leaching, and the circuits for finishing product. Down the road, we anticipate these steps will lift output and bring costs down. Just as we'd planned, we wrapped up our twice-a-year maintenance shutdown in April, and that work involved periods for installing and commissioning tied to a number of projects. Because of those projects, getting back to typical output took a bit longer, so we anticipate a quarter-over-quarter drop in the single digits for NDPR oxide production, then a big rise sequentially in Q3 once the full advantages come through across a complete 3-month span. After the remaining commercial-scale processes were commissioned at independents in Q4, our attention now is on building up the facility, boosting throughput, enhancing yields, and in the end bringing operations to a stable state. This is intricate, meticulous work that requires time to get fully optimized, though we're moving along well. We've got a robust team that keeps expanding, and the main processes are carrying over effectively from development to production. Our commercial magnets' magnetic performance matches what customers require, which shows the system works as designed at scale. Alongside the commercial ramp-up, we're pushing ahead with product development. That covers new grades and specs for magnets with better underlying chemistry, such as a substantial cut in heavy rare earth content. These efforts line up with customer programs, among them Apple and the Department of War. As our Magnet Recipe road map grows, we're setting up the platform to serve a large share of the commercial market, covering newer uses like robotics, drones, and defense, with greatly lowered heavy rare earth content and, in certain instances, none at all. Turning back to Mountain Pass, we anticipate kicking off recommissioning of the first phase of our chlor-alkali capability very soon, which is a key chance to boost resiliency and efficiency. Our main reagents, hydrochloric acid and sodium hydroxide, can be sourced domestically and aren't directly affected by the recent worldwide supply chain upheavals. Chlor-alkali offers a strong chance to cut outside reliance further, shrink our environmental impact, and lower costs as time goes on. Our heavy earth separation circuit is still set to start commissioning in Q2 and to make terbium and dysprosium before this year ends; beyond those items, the circuit will yield 2 intermediate feedstreams — mixed samarium europium gadolinium and holmium tyletesium plus yttrium concentrate — which we can hold for separation down the line or sell to outside parties, helping to grow the broader supply chain. With the Department of War agreement in place, we've made a commitment to turn out samarium oxide at high purity, and our planning for that product keeps moving ahead at a steady pace, together with the possibility of producing gadolinium oxide and other appealing HRE product capabilities. On a separate note, the magnet recycling line we built at Mountain Pass to back up our Apple agreement has finished conceptual design and is pushing further into engineering and procurement. That line is both a strategically significant asset and a strong business opportunity, closing the loop across our end-to-end capabilities while generating an additional source of third-party feedstocks that contain both light and heavy rares. Beyond breaking ground to 10x, the expansion work at Independence aimed at 3,000 metric tons of annual magnet capacity, which also backs our Apple agreement, keeps moving forward. Design is almost finished. Every major piece of equipment has been ordered, and we're still on schedule to hit our targeted start of production dates. Taken as a whole, this was a very solid quarter of execution throughout the business. We posted stable upstream performance, kept advancing our midstream operations, verified that our commercial magnet processes are viable, and made steady progress on a wide range of growth initiatives. As we work through the rest of the year, we stay focused on disciplined execution, applying what we learn and turning that progress into greater output, reduced costs, and an operation that is increasingly integrated. I'm encouraged by where we stand, continually impressed by our team's ingenuity and grit, and optimistic about the road ahead. With that, I'll hand it back to Jim.

Jim Litinsky executive
#5

Thanks, Michael. As we've gone over during today's session, 2026 has begun on a very solid note. Looking forward, our approach is straightforward: grow in order to meet demand, finish bringing our platform together, and carry things out with discipline. We are the national champion, with a distinctive platform built on actual assets, actual production, and actual customers. Beyond that, as I've said time and again, my view remains that obtaining NDPR oxide will keep being the limiting factor for rare earth magnet output outside China that makes economic sense, for a minimum of the coming 5 years. This quarter, we observed the Japanese government along with industry lock up almost all of Lynas' NDPR output through long-term arrangements. Consequently, very little uncommitted NPR supply remains to back what Adamis research forecasts will be over 60,000 tons of Western magnet capacity that exists or has been announced in the years ahead. One handy industry guideline is that roughly 1 ton of NDPR oxide feedstock is needed for every 2 tons of magnet output. To put it another way, getting a 10,000 tonne magnet facility up and running ultimately demands upstream mining and refining capacity at a scale similar to Mountain Pass, plus industrial capability whose replication would probably take more than 5 years and considerable capital, even if a resource like that were found today. We think this reality offers strong validation of our vertically integrated strategy and puts MP in an excellent position as the market keeps changing. Crucially, we're accomplishing this with considerable contracted visibility throughout the platform, such as our partnerships with GM, Apple and the Department of War. These agreements deliver lasting long-term growth and cash flow, along with significant upside as we keep scaling. We feel confident about what lies ahead and are thankful to our team and partners for their ongoing support. With that, operator, please open the line for Q&A.

George Gianarikas analyst
#6

Hi, everyone. Can you hear me?

Jim Litinsky executive
#7

Yes, George.

George Gianarikas analyst
#8

Jimmy, you kind of touched on this already, and I'm certain it hasn't escaped you, but right now there's quite a bit of drive beyond MP to create a Western group of magnetic champions; and you've been traveling this road for a while. And as you head toward that 10,000 ton goal. How would you describe the expertise or operational advantage you've established across stages 1 and 3. And more precisely, if someone were starting from scratch as a rival today, what main obstacles stand in the way of them catching up?

Jim Litinsky executive
#9

Sure. Well, thank you, George; and yeah, I mean, like you mentioned, there's plenty happening out there. I'd say capital formation is broadly a positive thing; we'd like to see more of it within the supply chain. So it's encouraging to see so many projects emerging. Clearly, when it comes to heavies, for instance, it's wonderful to see capital formation there because from a heavy perspective, our focus is on a fairly diversified feedstock supply chain. We aren't really as keen on owning upstream projects; so we'd like to see plenty of capital formation out there. We believe that possessing our current refinery is truly a major edge, at minimum for the foreseeable future, 5-plus years because every project we observe globally, in the end, if it's a non-Chinese supply chain, it's going to wind up in or very probably wind up in our refinery; and therefore we don't really have to participate in those projects to expand our business, yet we can definitely gain from them. And what I'd add, I mean, I think what — I suppose, these projects are genuinely tough, having spent a decade doing this now. I think there's a habit out there of examining projects and saying, P-times-Q equals this. And so that represents the project's cash flow. And honestly, getting these things up and running tends to take a very long while. More often than not, they cost more than you'd anticipate, and reaching full production takes multiple years. You can't just put up a plant and flip a switch. And often, when you weigh what a deposit might offer against what actually happens once you work through the processing difficulties—even if that's entirely on the upstream side—just to achieve the recovery rates, what you generally discover is that the opportunity you imagined in theory isn't always the opportunity you end up with. To put it in a somewhat roundabout manner, we are quite deliberate about the places where we choose to put money to work. You might have heard this from me previously, George — I've said it in jest — but there's a well-known Jeff Bezos line: your margin is my opportunity. At MP, we flip that around. When I survey the landscape, what I say is: your investment is our opportunity. Think of it as the Litinsky version of that idea. Essentially, we simply want to see plenty of activity out there. We have some doubt that folks will manage to get projects up and running as fast as they imagine, or secure the pricing they're expecting, and all the other pieces that come into play when the dream scenario turns into something real. Still, we believe it ends up being positive for the supply chain. It's wonderful to watch governments worldwide showing enthusiasm, wonderful to watch capital being formed, and in the end I believe it will be quite advantageous for us, since we're in a strong spot: we determine our own outcome in the sense that we keep delivering, and our cash flows are under contract. Consider GM, Apple, the Department of War, and our business expanding by 10x — with all of that under contract, we know that financially we're fully shielded. Finally — and apologies for the rambling reply, but it's truly a terrific question, given all that we're seeing out there — I do want to restate, George, what I said during the prepared remarks regarding NDPR oxide being the binding constraint. I don't want to talk up a competitor, but honestly, people should take a look at Adamis's intelligence research. If you look ahead about 18 months to 2 years, we're seeing magnet capacity outside China — in the non-China world, basically — of around 60,000 tons, growing to more than 100,000 tons. And when you check, the only material that's truly scaled comes from MP and Lynas. Lynas has already made commitments to Japan. Obviously, we'll be in a position to supply our magnet facility. So I look at all these magnet companies, and I have to ask myself where their feedstock is going to come from. Again, I believe that leaves us in a very strong position. I want to stay realistic. I don't want to dampen a lot of investment in this space, but I do think it will create some incredible opportunities for us.

George Gianarikas analyst
#10

You can go ahead and give Adamis a shout-out — they deserve it. One more brief question from me. As you increase output of magnets, are you making any changes to how you approach metallization?

Jim Litinsky executive
#11

Absolutely. Michael, would you like to take the metallization part?

Michael Rosenthal executive
#12

Right. Thank you very much. What we're aiming for is a mixed model in which we keep running as we do now. And to grow what we can do at Independence; at 10x we'll have that capacity too. And we're in discussions with partners both at home and abroad regarding additional mineralization. At present we rely on some total processors. And our plan is to keep relying on that as we explore other low-cost low-cost metallization choices globally.

Brian Lee analyst
#13

I suppose my initial inquiry concerned EBITDA margins within the Materials division. Those looked quite robust in this period, possibly exceeding what had been anticipated. First off, would you agree that assessment is accurate? And does that stem from improved pricing? Or might there also be something happening on the expense side? Perhaps you could take us through a few of the positive and negative factors? Then, additionally, how should we consider EBITDA margins from these levels as we move forward and volumes increase?

Ryan Corbett executive
#14

Sure. Brian, this is Ryan. I appreciate the question. When we examine how the Materials segment performed, we were definitely happy with what Michael and his group achieved in pushing output higher than anticipated. That's excellent, in my view. We likewise enjoyed a highly productive quarter for sales. As mentioned previously, shipment scheduling always creates quarter-to-quarter fluctuations regarding revenue that ultimately gets recorded within that 3-month window; however, given the thrilling new partner unveiled during the prior quarter, we managed to begin shipments under that agreement too. That generated additional momentum in sales volumes. We keep observing an obvious route toward removing expenses from that operation. We detect no significant shift in the direction we've described on our way to eventually reaching steady-state volumes running consistently at that level. Thus we remain committed to pressing forward toward it. There is still effort required on our part, yet the route seems fairly evident. So I wouldn't say anything this quarter genuinely took us off guard in a meaningful way. I'd say we're simply focused on carrying out the plan, pressing onward toward our eventual goal for throughput and the cost structure we're aiming for.

Brian Lee analyst
#15

All right, that's useful, thank you. Now, stepping back a bit — there are plenty of solid operational achievements and points covered here, but turning to the customer development front. As I recall, during the prior quarter you announced a fresh customer. It's fair to say one shouldn't expect a brand-new customer each quarter, but could you describe the current level of engagement activity, and also how you plan to lock in additional offtakes, and perhaps which categories of customers you're interacting with most at this point?

Jim Litinsky executive
#16

Of course, Brian. The engagement, I'd say, is extremely strong — it's actually been quite remarkable, and it continues to be that way. We're certainly having plenty of excellent discussions. Given what's happening globally with the shifting nature of warfare, there seems to be a distinct and growing awareness that the world is different now; and clearly, with all the enthusiasm surrounding physical AI and its implications, NDPR is, at this point, a binding constraint within the magnetics business. As that growth unfolds, I believe people — especially those in certain growth verticals — are coming to see that too. So it puts us in a very strong position. What I'd add, and just to remind you — and I know you've heard this from me before — is that our business is contracted. We sit in a good spot regarding Obviously, independence is going to be essentially for GM and Apple. Then, looking at 10x, we'll take our time to thoughtfully sort of build out the customer base of that facility, but it certainly is not for lack of interest or demand we will approach that methodically. And I'd note there will be certain customers that are extraordinarily sensitive, where you certainly won't hear a name or an announcement. And then there'll be some that want to announce. But what I'd say is that, that discussion continues. We're going to — it's going to — I think it's going to be really attractive for us, and we'll just keep — stay tuned obviously for things we announce in time.

Corinne Blanchard analyst
#17

Could you perhaps discuss the pace of output you anticipate for the remainder of the year? Then my follow-up would be, maybe, a broad perspective on the Middle East conflict — any shift in how customers are approaching things or in demand?

Jim Litinsky executive
#18

Michael, go ahead and handle the first portion, and then I'll cover the second.

Michael Rosenthal executive
#19

All right, that's great, thank you. Just like I said during my prepared remarks, we're expecting DR output in Q2 to dip a little compared with the prior quarter; for Q3, we do anticipate a significant step back up. After that, I look for ongoing gains as we move toward hitting a run rate of 500 tonnes per month by the close of this year. So there's essentially nothing different from what we talked about before.

Jim Litinsky executive
#20

Then, Corinne, regarding your second question about the Middle East, let me build on that and revisit it. This began several years back when we observed events in Ukraine and the rise of what is essentially physical AI — meaning drone and robotic combat. After that, I'd say what took place in the Middle East has definitely sped things up and amplified — excuse the wordplay — the view that drones and robotics represent the future of warfare. So here's my take: the significance of this supply chain was, I believe, already broadly understood. It's a bit like infinity multiplied by 2 still equals infinity — I don't think those events were really necessary to make people aware of the existing situation, or that rare earth magnetics as a national security sector had to transform. Still, without a doubt, this brings added acknowledgment and perhaps even moves the schedule and the magnitude of that demand ahead. My sense is that it's quite probable warfare in the future will involve millions — eventually not billions — of robots and drones operating together. And clearly, that represents an enormous demand accelerant for rare earth magnetics.

Lawson Winder analyst
#21

Congratulations on a strong quarter and a solid update; with independence now in place, that ramp-up seems to be progressing very well. Right now, I'd imagine you're getting fairly close to having a reasonable sense of the timeline for hitting nameplate capacity of 1,000 tonnes in the first phase. Could you begin giving us some guidance on that at this point? And then — yes, and after that I have one more question on the same topic.

Ryan Corbett executive
#22

Lawson, I would say that obviously we're very happy with how the team there has performed. There's still a great deal in front of us, though. At this stage, all of the commercial equipment has been commissioned. And currently we find ourselves in the product qualification process alongside our foundational customer, GM. As we've likely discussed previously, that's a pretty rigorous and demanding process, and it isn't simply a matter of whether you can produce the part. It involves establishing a highly detailed quality management plan, testing run-at rate scenarios; and honestly, much of this also relates to taking validation parts that must be produced using the commercial equipment rather than the NPI equipment, placing those parts into motors, performing regulatory testing, efforts at that scale. So there are numerous puts and takes regarding how that will unfold across the next couple of quarters. So we're happy with where the team stands. But of course, we anticipate that will require some time, and after that deliveries will be modest before growing over time; we've provided guidance that we expect to be in production for our second marquee customer there around the middle of next year for Apple. And so once you begin layering those volumes on, certainly, the momentum starts to build. So from that standpoint, I believe we're pleased with our progress.

Lawson Winder analyst
#23

Then, as a follow-up, I'd like to focus on 10x and specifically the second aspect of independence regarding Apple. Given the first-of-kind lessons you've already gained at independents, how would you describe the schedule for the upcoming phase and then 10x?

Ryan Corbett executive
#24

Sure. Obviously, I believe we've picked up plenty of lessons from creating this operation starting from nothing, correct? Our initial Magnetics hire came aboard during 2021. Watching the advancement we've achieved is quite remarkable, yet those lessons are enormous, and at this moment, while we work through the process — I think Michael put it clearly during his prepared remarks — that will provide us, and honestly, to return to George's question, the moat we've established through this operational know-how while expanding this operation is incredibly valuable. Therefore, every additional customer is hopefully likely simpler than the 1 preceding it. We've provided approximate guidance regarding when we believe 10x will occur from a time line standpoint; we're proceeding with maximum urgency to get that facility operational alongside our partners at the Department of War. So from an execution standpoint, it's truly all hands on deck, ramping those up as fast as possible.

Bill Peterson analyst
#25

Great work on this quarter’s execution. I’d like to pose a handful of follow-ups, perhaps seeking greater precision on items raised earlier. Turning to expenses: 12 months back, you provided a cost bridge with an objective of reducing costs from above $60 per kilogram to $40, driven by better utilization, fixed cost absorption, plus advantages from chlor-alkali. You touched on chlor-alkali, yet for a point-in-time view, I wanted to verify where things stand along that path despite the Q2 hit from downtime, and also your route toward reaching that earlier goal.

Ryan Corbett executive
#26

Yeah, absolutely, Bill. This is Ryan. Appreciate the question. As I previously explained, given all the inputs that went into that guidance, we foresee no significant departure from our eventual plan. Consider a snapshot taken during any particular quarter, producing, say, approximately 1,000 tonnes in the prior quarter. Many approaches exist for producing 1,000 tons—certain ones carry lower costs, others higher costs. And certainly, as we progress toward steady output at our run rate target, that will release the operating leverage we’ve mentioned. During any individual quarter, there are—many shifting elements involved in funding this debottlenecking right now. Then definitely, one effect you’re observing at present, where full visibility into the stand-alone NDPR operation isn’t available, stems from our substantial investments that appear in the P&L as we scale up staffing for the heavy wear separation facility, along with preparing ahead on team and tools for that chlor-alkali plant before it comes online. So as you look ahead across the coming quarters, combining achievement of our intended throughput with bringing these operations online is when the leverage truly begins to show through.

Bill Peterson analyst
#27

Yes. I appreciate the background. And perhaps to build on what Lawson asked; I'd like some clarity on how large the revenue path looks for the rest of this year and going into the next one. That's accounting for precursor sales falling off before the finished magnet ramp arrives for your customers. So basically, should we expect that total revenues in the magnet segment would drop at some point during the latter half of this year or early in the next one, before climbing again as a finished magnetron? I'm just attempting to understand how we ought to model that business on the revenue line?

Ryan Corbett executive
#28

Yes. Look, I believe what we're seeing at present is clearly that completing the PPAP process will open the door to generating revenue on the magnet side; the truth is we're manufacturing out of view, yet we have to reach a sellable PPAP status before we can begin recording revenue there; and so definitely, I think we provided you with the components of the leftover deferred revenue that is going to wind down and more or less begin falling quarter over quarter. And then we're moving as fast as possible to make up the gap on the magnet side. But we'll continue to update you as we move through these coming couple of quarters. I think the truth for us is, pulling back for a moment. Certainly, fully focused on execution, there will be unevenness across the next few quarters; but when you consider how Jim described our position in this business, the operation we currently see, the magnetic characteristics of our parts are doing very well. And so we've demonstrated by now that we can take what we accomplished at a smaller scale and expand it. And so it's merely a question of timing; and so we're eager, clearly, to add growing volumes once we're past the PPAP process, onboarding our next group of customers. And so across the coming several quarters, that financial model will definitely begin to materialize.

Bill Peterson analyst
#29

Yes. Thank you, Ryan, and I appreciate the team sharing all those insights.

Davis Sunderland analyst
#30

To kick things off, I'd like to revisit 1 of the points Lawson raised as well, and Ryan, I'm grateful you discussed the learnings. I'm curious whether you all could elaborate a bit on how what we've learned from independents could allow 10x to be more efficient when it comes to dollars per capacity, or on a time line, or through any other metrics that show how version 2.0 could outperform the first one, so to speak?

Jim Litinsky executive
#31

Sure. Michael, would you like to handle that one?

Michael Rosenthal executive
#32

Absolutely. We've gained an enormous amount of knowledge during the past 2 years when it comes to designing, constructing, and subsequently ramping up new facilities. A great deal of the engineering work can therefore be, up to a point, duplicated directly. There's no need for us to build certain vendor relationships again from scratch. We take advantage of what we already know. As a result, the design phase is going to move much more quickly and be far less susceptible to errors, change orders, rework, and so on. So the speed of engineering, design, and construction is definitely going to be considerably greater than anticipated. On top of that, we believe the ramp at Independence — which began last year and continues through this year and afterward — is going to provide us with extraordinary understanding of a process that yields excellent magnets while pushing costs lower. That knowledge will therefore be put to use from day 1 in how 10x operates. And because our people can move back and forth between the 2 separate locations, we'll be able to take advantage of that understanding rather than having to develop it again from the ground up; so we definitely anticipate that 10x will be much smoother when it comes to start-up than what we'll recall about Independence. Naturally, though, given the size of what we're undertaking and the added product complexity, there will undoubtedly be a portion of difficulties too.

Jim Litinsky executive
#33

And, Davis — Jim here. I'll just piggyback on Michael's comments. One thing he brought up strikes me as especially significant: his point about equipment suppliers and the way we view our magnet operation. If you look back roughly 5 years, to our IPO, when we launched the Magnet business from nothing, a small number of priorities drove me as I built it. Clearly the first one is bringing aboard an excellent team, correct? We brought in an excellent leader, and from there we began assembling an excellent team. Priority 2 on that list involved creating a sourcing plan for equipment outside China. Back then, despite the world looking entirely different, we regarded it as somewhat strange and tough to defend that a rare earth magnetics supply chain outside China would make sense, yet depend completely on equipment from China, correct? So we got started, and this was surely costly and difficult for us across those years, but from day 1 we constructed that facility with the idea in mind that we had to genuinely rebuild this supply chain through to the equipment itself. Then the final item I think we're building upon is that the final component of that excellent team — growing that team, equipment — is essentially charting and comprehending the IP landscape, particularly regarding their grain boundary diffusion approach. Without question, the magnetics producers in China excel at pushing the boundary — I suppose that's another pun intended. Yet the Chinese and Japanese industries are extremely adept at moving the IP forward and producing the best magnets per dollar, as it were. So we concentrated heavily on that right from the start. And I think we've now brought the MP team to the leading edge. As you might have heard me mention, I believe across the coming few years, we will eventually jump ahead from an IP perspective. One objective I've given the team tied to 10x is my belief that — once that facility begins operating, MP will, from an IP perspective, jump ahead and become the top magnet maker globally. Naturally, we'll absorb plenty of difficult lessons while we ramp that facility and expand our business; but we're already contemplating all of those matters to guarantee we stay ahead technologically. It isn't merely about constructing a huge box and placing equipment inside it.

Davis Sunderland analyst
#34

That's really useful. Perhaps one final item — a dull administrative one, yet it's likely directed at you, Ryan. Could you possibly share anything regarding contract adjusters, or other mechanisms guarding against inflation, that your gas business might possess in order to, I suppose, lessen the effect of rising shipping and logistics expenses, or perhaps this shows up as a sales leg longer than usual, or any further points along those lines?

Ryan Corbett executive
#35

Certainly. When it comes to the Materials segment, at least, the shipping and logistics piece, at least from a cost-of-fulfillment standpoint, is very tiny compared with what the product costs. Thus, despite the inflation present in logistics expenses, my expectation isn't that it becomes a significant factor for the business. Regarding the cost structure and materials, definitely, we've listened to other producers, especially those depending on Sulfuric within their process, describe difficulties and cost difficulties in that area. I believe we're lucky that, as Michael noted, those aren't the materials our process relies on. Consequently, naturally, general inflation does affect us too — gasoline and diesel are definitely utilized in our mining fleet — yet that represents a very minor share of the cost structure. So on the whole, we feel rather positive. Then magnetics is somewhat of a separate creature regarding how we've arranged the contracting. Without diving into specifics of particular contracts, I'd say we've consistently been careful about shielding ourselves from rises in raw material prices regardless of their origin, for any kind of raw materials. Therefore, we feel fairly confident about the way we've contracted around that.

Sam Brandeis analyst
#36

Can you guys hear me okay?

Jim Litinsky executive
#37

Yes, Sam.

Sam Brandeis analyst
#38

So Jim, given how you've laid it out — NDPR oxide being the thing that really caps non-China magnet output across the coming 5-plus years — that's a pretty compelling picture. You've got 6,000 tonnes announced, scaling toward 100,000 plus, limited feedstock, and the independents basically already claimed by GM and Apple, as you both noted, plus 10x expanding its buildout. So how do you weigh locking in more long-term offtake deals against keeping flexibility open to capture pricing and margin as <<inaudible>>?

Jim Litinsky executive
#39

Yes. And just to clarify, Sam, that figure is 60,000 across roughly the next, let's say, 18 months — 6 to 0 — which, incidentally, works out to about 30,000 tons of NDPR demand. So it's already, well, it's pretty much unmistakable that NDPR is what's capping things just across the next year or 2. And then that 60 figure is meant to climb past 100 during the following 5 years. Clearly, not all of those will actually be constructed. But I do find myself puzzled — if you're standing up a magnet operation right now without guaranteed, dedicated feedstock at scale, and provable at that, I simply can't see a path to making a magnet. As for your question, it's a great one. I think this really comes back to the foundation of the company when we first set out to build this business — we've always been, and we've stated this repeatedly, of the view that the midstream and the downstream are separate businesses, even though a vertically integrated strategy matters enormously. We need to be certain we're maximizing returns and being careful — meaning we don't rob Peter to pay Paul. So when we examine our magnetics business, we don't want to prop it up by accepting poor pricing, say, on the midstream side and then tell ourselves, "Oh, gee, we put this money into the Magna business, we offered some form of price protection, and we wound up losing money on that investment." No. By and large, we want to be sure our magnet business obtains material at what amounts to market, right. Naturally, there are certain puts and takes around contract structure; but by and large, the Magna business obtains material at market and from there anticipates a very appealing return. So that's a roundabout way of saying we'll gain from that exposure, but I also believe there's a compounding effect at work — namely, yes, the price will rise, in my view, for NDPR. I'm less convinced that's true for the heavies. Actually, I think if you look, I'm aware there's some discussion circulating regarding the heavies. And once more, when it comes to commodity pricing, that's something no one can predict with certainty. Still, compared with what the market anticipates, it wouldn't shock me if the steepest declines showed up in the heavy prices — the magnetic heavies ITB in particular, not the rest, only the magnetic grades YTV — falling pretty dramatically from where we are now. The reason is that those have become somewhat secondary to the binding constraint of NPR at this point. Even so, we anticipate gains from the NPR price, and beyond that, from having this business assembled as one. Our customers will want to bring their business to us. Think about it — if you were in the market to purchase a magnet, why take on supply chain risk? Even if you're prepared to spend more, and do everything needed to onshore, why would you go and accept an unstable supply chain situation? That's essentially why you're in this position. So I believe we can stand before customers — and we are, we're watching this happen right now — because we hold the feedstock, we can lock in long-term appealing business at incremental appealing margins within the magnet business, on top of capturing the commodity price benefit.

Sam Brandeis analyst
#40

Great. No, that was quite useful. And just to build on it — so you've described physical AI, drones, robotics, and autonomous defense systems as yet another step change that accelerates demand for the industry, and for empty materials especially. When you speak with customers in these emerging verticals, how do you estimate the additional NDPR demand pull coming from physical AI compared with the more mature EV and traditional defense channels? And how does that change the way you think about 10x capital allocation and the pace of expansion beyond that?

Jim Litinsky executive
#41

That's a great question. That connects to what was just asked, and it's one more reason I think we could genuinely witness a significant drop in DYTB pricing. When we examine the physical AI sector, we anticipate that for robotics and certain drones, most of those applications will probably rely on magnets with a lot of heavy rare earth content. That said, we're already stretching what's possible right now — our capacity to make magnets meeting the required specifications while using minimal or zero heavies keeps improving, and the pace of those gains has been quite remarkable. That's a really good question, and honestly it's something we wrestle with constantly as we figure out how to grow 10x, since I genuinely believe the physical AI surge matters enormously — not just for national security reasons, but as an economic opening too. And I want to be careful in saying that. To put it another way, consider what's taking place in certain parts of the AI supply chain right now—suddenly there's an advance, and then a ripple effect follows, whether that involves memory, CPUs, or similar components, where pricing shoots upward dramatically once everyone grasps, "We've just had this technological leap, and we require additional quantities of x." Since we lack it, and it matters enormously for sales and value further down the line, prices essentially skyrocket. Also, I believe — though I can't say when this will happen, and I'm not suggesting it's happening in the coming week or even the coming month — that eventually, once humanoid robotics especially turns into something real, assuming the prominent technologists' predictions hold up, with magnetics being the crucial component, together with chips, clearly, and the capacity to work out how to get these products manufactured. Still, I do believe a kind of psychological reevaluation of how vital our product is will occur, and we genuinely aim to have the business positioned, alongside certain other customer segments, though our attention is firmly on that vertical for the moment when it arrives.

Carlos de Alba analyst
#42

Can you hear me?

Jim Litinsky executive
#43

Yes, Carlos.

Carlos de Alba analyst
#44

Great. So just—sorry, only 1 question. Given that gap between supply and demand you mentioned, with such a strong outlook for NDPR, have you worked out what incentive price would be needed for NDPR capacity, or supply, to potentially respond to the demand coming our way?

Jim Litinsky executive
#45

Yes. I mean, that's a great question. Obviously we think about it, and we've discussed it over the years. As I've said before, having put a decade into this industry, bringing these projects online—you start by finding a deposit, then you grapple with the challenges of determining what can truly be recovered, and you tackle the processing side, whether by selling to a processor or, say, building both a mine and a processing facility—that consumes a great deal of time, doesn't it? It isn't simply a matter of erecting a large processing plant, which demands considerable capital, and then ramping up production; there's no button you can press to switch it on, is there? Usually it takes multiple years before operations begin. From what I understand, Lynas required over ten years; our own schedule was much, much faster. But every one of these projects requires time. If you take a model and tweak it so it isn't just, say, checking the reserve report, grabbing all the rare earth contained in it, applying a price to it, and evaluating that basket, then concluding we can construct it for X, which means our NAV equals Y — that's basically how this industry has always operated, and that's what we're witnessing right now, both today and in the market. The truth is, you're not going to capture that entire basket; you'll only recover a portion of it. It won't come out flawless. And it will require far more time than you anticipate — years more. Over time, the price of capital definitely shifts as cycles play out. What that means is these assets are simply tougher to source through digital channels and present more friction. As I've said before—and I'll repeat it once more, purely because it amuses me—the flip side of that Bezos line about your own investing being your chance applies here too. This business was built on capitalizing on a massive wave of spending that we essentially stepped in to repair. So yes, we're already witnessing signs of that in the market, and I believe it will create openings for us. But to give you a direct response: when you add up every one of those factors, the resulting figure far exceeds what the majority of people would estimate. And the geology plays a huge role too, doesn't it? If a project looks appealing, raising money is the simple piece. The real determinants are what the deposit is like, how you go about extracting and processing it, and how long it takes to get up and running. Add it all together and you get a number, but that number sits well above where pricing is today.

Carlos de Alba analyst
#46

Right, that logic holds up. What you hinted at comes through pretty plainly. Perhaps this was an extremely strong quarter, correct? If I had to point to one thing, it would be cash generated by operations, which came in somewhat below what we expected. Given how quickly the business is moving at present, maybe that figure deserves a note. Still, how should we think about it across the next few quarters, so we can adjust our model a bit more toward what's actually happening — closer to reality?

Ryan Corbett executive
#47

Sure. Carlos, this is Ryan. Broadly speaking, the first quarter is usually the period where our working capital and cash flow look weakest. Quite a few prepayments tied to particular items land in Q1 of the year — things like employee compensation — and from a working capital standpoint, all of that becomes a drag during Q1 that doesn't truly recur over the remaining portion of the year. Beyond that, it's simply a matter of ins and outs. To be sure, some portions of the earnings pool exist right now, plus fairly sizeable amounts of sales that we're beginning to gather as we speak; so really, this comes down to a working capital timing matter.

Carlos de Alba analyst
#48

Congratulations on a very solid quarter.

Jim Litinsky executive
#49

Thank you so much, all of you; it was definitely a remarkable quarter in terms of execution, and now we will return to our work and we look forward to meeting with you again in the next quarter.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete MP Materials Corp. transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to MP Materials Corp. earnings transcripts and 132,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.