MP Materials Corp. (MP) Earnings Call Transcript
November 5, 2026
Earnings Call Speaker Segments
Thanks, operator, and good afternoon to all of you. I'd like to welcome everyone to the MP Materials earnings conference call for the third quarter of 2026. Joining me today from MP Materials are Jim Litinsky, our Founder, Chairman, and Chief Executive Officer; Michael Rosenthal, our Founder and Chief Operating Officer; and Ryan Corbett, our Chief Financial Officer. Just as a reminder, this afternoon's discussion is going to include forward-looking statements about future events and expectations, and those are subject to a range of assumptions and caveats. The factors that could cause the company's actual results to differ materially from those statements are laid out in today's presentation, in the earnings release, and in our SEC filings. Beyond that, this presentation includes certain non-GAAP financial measures. You can find reconciliations to the most directly comparable GAAP financial measures in today's earnings release as well as in the appendix to today's slide presentation. Whenever we refer to EBITDA in our discussion, we mean adjusted EBITDA, and when we say tons, we mean metric tons. And lastly, both the earnings release and the slide presentation are available on our website. With all of that said, I'll hand things over to Jim. Jim?
Thanks, Martin, and good afternoon, everyone. MP turned in another robust quarter throughout the company, with NdPr output and sales volumes continuing to climb and with solid progress on a number of key strategic initiatives. Within our materials segment, NdPr production for the third quarter rose 41% from a year earlier, reaching 1,018 metric tons, consistent with the guidance we gave in August. Our product continues to see very strong demand, and NdPr sales volumes came in at 1,020 metric tons, a 94% year-over-year increase. Michael and his team also advanced our heavy rare earth separation circuit considerably during the quarter. I'm happy to report that commercial-scale output of dysprosium and terbium starts this quarter, Q4; that will meet our heavy rare earth requirements for the EV traction motor magnets we make at Independence. We also gained from the strategic worth of the inventory accumulated through our separation operations. Ever since we launched commercial-scale light rare earth separation a couple of years back, we have set aside the heavy rare earth fraction of our output while we built out our heavy rare earth separation capabilities. That fraction is what we usually call SEG+. Given geopolitically driven supply tightness, especially in heavy rare earths, we sold a modest share of our SEG+ inventory to serve an important strategic customer. The transaction produced attractive economics, and we kept several hundred tons of feedstock to support our own production down the road. In total, the materials segment generated $141.6 million of revenue and PPA income along with $47.8 million of adjusted EBITDA in the quarter; over in our magnetics segment, qualification is complete and we will start shipping saleable magnets to GM this quarter. Ryan will give you more detail on what to expect across the coming several quarters, but I want to acknowledge our outstanding magnetics team. We built this business from the ground up, and I believe we are well on our way to becoming the most advanced, most profitable, and best scaled magnetics platform anywhere in the world. 10X is still on track for commissioning in late 2028. As we ramp magnet deliveries to GM and expand Independence so that deliveries to Apple can begin in 2027, we keep refining our production processes from precursor products through to finished magnets. Our ramp and expansion are still at an early stage, yet we are already producing solid financial results. This was another good quarter, with segment revenue of $18.6 million and adjusted EBITDA of $5.3 million. With that, I'll hand the call to Ryan to take you through our financial results, and then Michael will share more detail on our operations. Ryan?
Thanks, Jim. In the quarter, consolidated revenue together with PPA income came to $155.8 million, up 23.6% from the prior quarter, which speaks to solid operating performance throughout the business. The gain versus a year ago was broad-based, reflecting NdPr sales volumes that nearly doubled, better realized market prices, a one-time SEG+ sale, and the inclusion of PPA income, which, as you'll remember, we started earning in the fourth quarter of 2025. Higher revenue combined with PPA income produced a $53.7 million year-over-year gain in adjusted EBITDA. And lastly, our sizable improvement in adjusted EBITDA, on both a sequential and a year-over-year basis, carried through into meaningful gains in adjusted diluted EPS comparisons. Turning to the fourth quarter, we anticipate that the robust operating performance in our materials segment will carry on. We expect NdPr oxide volumes and realized prices to stay broadly in line with Q3, at roughly 1,000 metric tons and $100 per kilogram, respectively. With realized pricing at that level and given our anticipated product mix, we look for about $8 per kilogram of PPA income on NdPr sold. As in Q3, we don't anticipate recognizing any PPA income tied to NdPr held in stockpiled concentrate. As we look toward 2027, we expect to keep seeing leverage in our cost structure as NdPr production volumes rise and cost optimization projects pay off; there may be some lumpiness around the Chlor-Alkali startup early in the year. In the end, we remain highly confident in our capacity to deliver strong progress on bringing down our cost per NdPr kilogram produced, especially in the second half of the year, once operations across heavy rare earth separation and Chlor-Alkali steady out. Moving to magnetics. At the close of the third quarter, roughly $28 million of deferred revenue tied to magnetic precursor products remained; we expect to recognize it across the coming several quarters at a declining rate as we draw down what's left of the balance and ramp magnet production. I'd also point to the margin lumpiness we called out last quarter; the main cause is the shift from precursor production into the initial ramp of magnet production, while we simultaneously invest heavily in our team, capabilities, R&D, and startup operations to set the business up for strong growth ahead. As part of that shift, a rising portion of our manufacturing costs, depreciation in particular, is now assigned to magnet production instead of only precursor products. Given how our precursor contracts are priced, that lowers precursor revenue near term. In the end, those costs will earn an attractive margin within our magnet products as magnet sales ramp; on that ramp, we're still in the very early stages of scaling production, so magnet sales will probably be lumpy from quarter to quarter. Beyond a measured scale-up of production volumes, magnet revenues will in the end be set by a deliberate phase-in by our foundational customer. Like you'd normally see when automotive supply chains shift, they'll use up what's already in stock and then bring our magnets into particular programs and plants gradually. As happens with any intricate manufacturing ramp, things probably won't move in a perfectly straight line as we raise throughput, lengthen production runs, and fine-tune the process. So we anticipate magnet volumes will grow steadily, beginning fairly small across the coming two quarters and then climbing in the back half of 2027, which is also when we expect production for Apple to start adding its contribution. Tying that all together, although we anticipate magnet sales will produce positive adjusted EBITDA right from the start, we expect the total adjusted EBITDA contribution from magnetics to stay modest through 2027, especially during the first half, since falling precursor revenue will offset the early magnet sales ramp; we expect the segment's full earnings power to show up in 2028. Turning now to the balance sheet and cash flow. Capital expenditures so far this year came to $413.8 million throughout the business. Roughly 60% of that spending went to magnetics, mostly for building 10X and buying the related land. We still anticipate full-year capital expenditures of $500 million-$600 million. Also, in the quarter, we brought in another $8 million of prepayments from Apple as we keep making progress toward starting production for them next year. We expect to bring in a further $120 million of prepayments across the coming one to two years as we hit assorted magnet and recycling-related milestones. Last, we closed the quarter with a solid liquidity position of $1.34 billion in cash equivalents, plus short-term investments on the balance sheet. With that, I'll hand things over to Michael. Michael?
Thanks, Ryan. From an operations standpoint, the materials and magnetics divisions each turned in another strong quarter, since we raised output while pushing forward on multiple programs meant to boost efficiency, broaden what we can do, and underpin growth down the road. At Mountain Pass, the numbers came in broadly as we had anticipated; upstream, concentrate output stayed robust even with pilot testing under way, spending on future growth and optimization, and work to get more out of the reserve base. On the encouraging side, these programs are showing they could unlock additional gains in operating efficiency and flexibility while keeping production strong. Midstream, results kept getting better. We hit our largest quarterly NdPr oxide output ever, matching our guidance. Through parts of the third quarter, we ran at a rate above 450 tons per month, which gives us more confidence in our long-term output targets. The majority of circuits are running well, and the payoff from the equipment upgrades and process improvements we covered last quarter is coming through. In the period, a few circuits ran into unplanned maintenance and equipment-related stoppages tied to bringing new capabilities online. As we said before, working through the remaining reliability bottlenecks will take an iterative approach across the coming several quarters as we build in redundancy and carry out focused debottlenecking work. Even with these intermittent disruptions, throughput, reliability, and operating consistency overall keep moving in a favorable direction. Our midstream expansion work also advanced meaningfully in the quarter. Chief among the highlights, we started up our first heavy rare earth separation circuits, built to split terbium and dysprosium out of the wider medium and heavy rare earth stream. We are happy with how startup has gone so far, with process and equipment performance both coming in as expected. Commissioning has mostly gone according to plan, helped by what the team has learned from years of running and fine-tuning our light rare earth separation facilities. Because separation circuits can be prone to unexpected operating difficulties and small upsets may set us back by multiple weeks, the team has taken the startup carefully and step by step; even so, we have handled those risks well and stay on schedule to start on-spec output of finished terbium and dysprosium shortly. As a reminder, this circuit mainly exists to serve our downstream magnetics division and its strategic customers. As we move toward full production, we remain focused on achieving sustainable output and making sure product quality holds. Bringing terbium and dysprosium separation capability online also yields two high-purity intermediate streams that we can choose to precipitate and finish. Those are SEG — samarium, europium, and gadolinium — plus a mixture running from yttrium and holmium through to lutetium. With the supply chain difficulties affecting the market right now, both products are drawing considerable customer interest. We are keen to seize these opportunities, especially since doing so lets us meet the near-term needs of our strategic long-term customers while taking advantage of an unusually favorable market setting for these materials. To help get the startup going and speed up near-term output of our medium and heavy earths, we also kicked off a process to carefully put our SEG+ inventory back into the system. Our wider heavy rare earth expansion strategy keeps moving forward as well. Our samarium and gadolinium initiatives remain on schedule to begin producing in the first half of 2028, using feed from the SEG intermediate stream I referenced earlier. Although conditions in the market at present are exceptionally robust for quite a few medium and heavy rare earth products, we do not expect the high prices seen today to persist indefinitely. A number of these markets are still fairly small, and export restrictions along with artificial supply constraints have hit them hard. Even with that, we see strong opportunities to generate value via targeted investments, commercial partnerships, and long-term offtake arrangements that help build out a broader market. The gadolinium agreement we announced last quarter illustrates the type of opportunity we are chasing. Solid project returns plus our capacity to add supply fairly quickly. We think these new capabilities will sharpen our ability to land and process third-party feedstocks and lift output volumes down the road. Getting our terbium and dysprosium circuits up and running successfully gives us even more confidence to chase those opportunities. At Mountain Pass, we kept moving forward on a number of fronts. In the first part of Q4, we finished our planned maintenance outage safely and successfully, mostly on schedule. As usual, the roughly 10 to 14 days needed to de-inventory, perform maintenance, and re-inventory will affect sequential comparisons. Still, we anticipate better sustained production rates and fairly steady year-over-year growth in total NdPr oxide output in Q4. Now regarding our magnetics business, the Independence teams achieved significant technical, operational and commercial advances, and those efforts produced what I consider a pivotal quarter for that operation. During this stretch, everyone concentrated on raising output of strip-cast alloy, growing throughput in powder processing, substantially boosting our machining, bonding and finishing capabilities along with related capacity, and securing better magnetic performance from chemistries we already have. Our emphasis, as anticipated, keeps moving away from proving we can produce and working through qualification toward scaling volumes and gaining efficiency. Having now built the capability to make qualified, saleable magnets at scale, we are stepping up work on material handling, process optimization and automation. As time goes on, these efforts are going to produce higher throughput, better operating leverage, and more value pulled out of the manufacturing platform. We're also still putting substantial investment into growing our technical capabilities. To back our Apple partnership, 10X, and wider market opportunities, our engineering teams are broadening the range of magnet grades and specifications on our product roadmap. As we've said in earlier quarters, cutting down on heavy rare earth usage is still a key priority. With additional progress in how we handle grain boundary diffusion, tighter process control, and continued materials innovation, we anticipate lowering heavy rare earth intensity further throughout our product portfolio while still meeting performance requirements. The progress we're seeing keeps us encouraged. To wrap up, the 10X build is still tracking to plan. What we picked up at Independence and Mountain Pass, plus the seasoned expertise we've built running big projects over a large part of this company's history, is finding its way into thorough engineering and commissioning blueprints. Zooming out, it was yet another strong quarter companywide. Between ongoing advances in our materials segment and key milestones in magnetics, the payoff from years of investment, operational learning, and technical development is increasingly compounding across the platform. That leaves me confident not just about our capacity to close out 2026 on a strong note, but also about what lies ahead as we broaden our capabilities, lift output, and deliver on our long-term goals; with that, I'll turn it back over to Jim.
Thanks, Michael. This marked yet another exceptional quarter in terms of execution. I feel a great deal of pride in the MP team. What you learn about every quarter is the product of years of demanding effort; during our August call, prior to the recent market turbulence, I raised the question of whether the vast amounts of money pouring into computing infrastructure would generate attractive returns. I also stressed at that time that the transformational economic opportunity would materialize once intelligence entered the physical economy. My view is that we are currently experiencing a second Gilded Age. As with the first, it pairs remarkable technological advancement with huge capital formation, substantial financial speculation, and concern regarding wealth distribution and the future of work. The railroads reshaped America even though a great many of the companies behind them ended up bankrupt. Correctly anticipating the future back then did not ensure a return. The financing strain now appearing in computing infrastructure serves as a reminder of that gap. Demand may expand dramatically while the economics prove disappointing. Capital continues to carry a cost, and investors require both a return on it and a return of it. Yet even while capital markets become more volatile, the components of the coming industrial era are starting to become visible. Superintelligence is entering the physical economy. Robots require motors, those motors require high-performance magnets, and such magnets depend on an industrial supply chain whose construction takes years. President Trump's recent proclamation regarding robotics and industrial machinery, along with the FCC's restrictions on foreign-produced advanced robotics devices, highlights how vital these supply chains are to national security. In the rivalry with China, American leadership will demand American production, spanning the robots themselves and the magnets that set them in motion; for context, the worldwide NdFeB magnet market totals approximately 250,000 metric tons annually, with well over 90% of production concentrated in China. Exact requirements hinge on final design, yet at three to five kilograms of magnets per humanoid, yearly output of 50 million robots would generate added demand equal to most or all of the present global market; that demand would arrive on top of cars, electronics, factory automation, drones, data centers, and defense systems that already rely on these magnets. One manufacturer aiming to build merely 1 million humanoids per year without depending on China would require magnet volume equal to roughly 40%-70% of 10X's planned annual capacity. And those established markets will keep expanding. China is striving to prevail across every one of them, particularly in robotics, where its own downstream manufacturers hold global ambitions. Take note of the capital being dedicated to this opportunity. Venture investors, major technology companies, and Chinese competitors are putting in billions. Private robotics valuations have already climbed into the tens of billions of dollars. Such valuations represent wagers on which companies will secure a portion of a market with the potential to reach multi-trillion dollars. The timing and the eventual winners stay uncertain, and near-term expectations could very well fall short; but set that capital next to the supply-demand arithmetic and the rivalry with China, and one conclusion stands out. If you think physical intelligence is going to change the world, then whether a company gets access to the MP platform may decide who is able to compete in an opportunity worth multiple trillions of dollars. What exactly that is worth, I can't say with precision, but I do think our present valuation falls well short of it. That isn't to say every rare earth or magnetics business is going to make it. Quite the opposite—I anticipate a very tough year ahead for portions of the industry. Certain projects will stall, and certain businesses will fail, whether from capital constraints, inadequate feedstock, flawed M&A, or a mix of all three. A strong demand forecast can't save weak assets, nor can it stand in for solid execution and strategy. Contracted cash flows, committed customers, and long-term partnerships spanning industry and government are what underpin our growth. That base lets us chase the robotics opportunity with patience. We don't require the most aggressive forecast to come true in order to build an exceptional business. As we make good on the commitments already in place, we are building the best and most vertically integrated magnetics company in the world. With that, let's open the line for questions. Operator?
Hey everyone. Good afternoon, and thanks for sending in your questions. Jim, I appreciated the way you laid out some of the medium- to longer-term opportunities. What I'd like to dig into is the nearer- to medium-term opportunity as it currently stands for you in NdPr magnets serving the automotive market, and GM in particular as your anchor customer. Can you give us a picture of the overall demand backdrop for NdPr magnets in the U.S.? I'm aware GM has had a very publicized dispute with another supplier that you might view as a peer of yours. Is that a reflection of demand for EV applications in the U.S.? Or could there perhaps be an opportunity for that demand to come your way, letting you actually upsize your commitments to GM? Just wondering about the bigger picture for EV magnet demand in North America.
Yeah. Hey, Brian; Ryan here. Thanks for asking. I won't get into that specific question of yours, but I think broadly, what we're seeing from a foundational customer and across the automotive space generally is demand for our products that remains very strong. We stay very enthusiastic and pleased with the demand backdrop we see from our foundational customer. Importantly, what we keep seeing is that, with GM being very early in their strategy of localizing, there are many, many more OEMs behind them that are really starting to catch up. Looking at automotive's share of the market, it is clearly extremely substantial. What we're seeing in terms of demand—both straight from OEMs and also from the tier ones and tier twos that supply them—is still remarkably robust. So in our view, as long as we choose to keep putting money into that space, automotive remains a genuinely large upside opportunity for us.
All right, that's useful. So perhaps just one broader question, and then I'll hand it over. I realize it's very early, but do you have any preliminary views on critical minerals and possibly a policy response—could this week's midterm election results have an effect on the U.S. rare earth sector and on MP in particular?
Hi, Brian. Sure, this is Jim, and I'll field that one. Fundamentally, we truly don't anticipate any shift. We're a national security company that takes no partisan stance. Our transaction really came about through the Pentagon. We have operations in red states, blue states, and purple states, and from the very start we've enjoyed solid bipartisan backing, and clearly we've been working under a fair number of different government regimes. So we feel quite confident that nothing changes on our end. Regarding some of the others, obviously I wouldn't venture to guess what could be going on there, but my guess is there will definitely be plenty of media coverage and activity on that subject.
Thank you so much, operator, and good evening, gentlemen. A nice quarter, and once again, thank you for the update. Ryan, I appreciate the guidance you've given on the magnet ramp-up as we look toward 2027 and 2028. I hear you loud and clear. When you call 2028 the year in which Independence's earnings potential will become clear, does that imply Independence will be running at its design rate of roughly 3,000 tons per annum?
Yeah, Lawson, at this point we're not providing specific volume guidance, especially given how our customer contracts are structured. I think two of them are very high profile, with others potentially to follow, so we won't get into the specifics there. But given what we expect from our production ramp-up, along with the feathering in of our products into our customers' supply chains, that's when I think you'll begin to see the positive flywheel become very clear from a financial perspective.
All right. If we approach this from a different perspective, and that's purely regarding commercial production: so far in 2026, there have been some significant startup costs. Once commercial production is reached, you'll begin recognizing those within COGS. Given the 2027 ramp-up you outlined for Independence, when would you anticipate commercial production being achieved, and how exactly would you define what commercial production looks like?
Yes, Lawson, that's an excellent question. As we said, shipments of saleable products will start this quarter, in Q4. That will involve ongoing ramp-up toward what we consider a somewhat more normalized volume level. Part of that will depend, as I noted, on how our parts make their way into the particular programs and particular plants of our foundational customer. And then, naturally, right on its heels, in 2027, comes the start of production for Apple. All things considered, I'd anticipate that we'll keep seeing, from a startup cost standpoint, ongoing costs in that category through at least the first half of next year, after which it will begin to taper off as we move into higher-volume production.
All right, I appreciate that very much.
Thank you for making room, Jim. What I want to ask about builds somewhat on the point you just raised, namely those many offtake agreements and price floors you have. To be specific, Jim, I'm assuming the answer is no, but it seemed worth putting to you: could any portions of your contracts or floors be revisited or reworked at some point by the incoming representatives?
No, that contract is binding on us.
That's exactly what I figured. OK, that seems easy enough.
Absolutely.
Second thing — could you refresh my memory on the 10X you keep pushing forward? I'd really like to hear how that's progressing. Could you speak a little to how discussions around it, price structure perhaps, have shifted over the last few months? To me, that seems like a pretty robust pricing backdrop even with the volatility we've seen in the group. I'm just curious whether your contracts keep moving ahead the way you expect.
Sure. I think that's a great question. What's really interesting here is that, looking back historically, over the past year or so, you may have heard me say we expect demand for 10X to be a multiple, given the growth and all the growth vehicles plus onshoring. What I'd say is that in recent months, really this quarter, it seems to have accelerated. We've actually seen specific RFQs, or specific customer sizings, that well exceed the 10X capacity we're bringing online now. What was sort of theoretical has become specific. I'd remind you that our 10X, as we know, is 100% contracted. We can bring it online in 2028, and we can be thoughtful about how we ramp and how we contract. We don't have any sort of financial gun to our head, so to speak. What that really lets us do is focus on what we believe will be materially higher margin opportunities. As I referenced in the script — and I try to be thoughtful about the words I put out there, Neal — we do believe we'll be somewhat of a kingmaker in some of these new multi-trillion dollar opportunities. If you look at our platform, we'll be able to enable a company or companies to be a number of years ahead of competitors. It's a very unique position we're in, and obviously, we'll make sure our shareholders are rewarded for that strategic value.
Great. Thank you, Jim.
Hi, everyone. Appreciate you taking my question. I'm certain that as of today you've tried out a wide range of magnet formulations in order to complete the qualification process with GM. I was just curious whether, over the course of that process, how your thinking has shifted regarding the market or the supply and demand balance for NdPr or certain other rare earth elements?
Well, I mean, sort of referring back to the answer I gave earlier, what I'd say — and we've been saying this for a couple of quarters now — is that we have dramatically reduced the heavy needs required to hit grade on automotive magnets. We truly believe we've built a lot of IP value on that front; then as you move into some of the other categories, which we believe are going to carry materially higher margin and higher growth, our expectation is that when 10X comes online, we are going to need likely none. I mean, perhaps we'll have certain verticals where we'll have a little bit, but we believe that we could, based on what we are seeing today, we believe we could fit more than the supply of 10X with zero heavy formulations. And so, again, I return to what you've heard me say for a quarter or two now, which is that NdPr is the binding constraint. For the major growth and margin opportunity that lies ahead, we do not believe heavies are going to be a factor. And frankly, we are making that reality happen through the extraordinary IP advancements that our team is achieving at Independence today.
Thank you, Jim. Perhaps I can follow up on that point. With the GBD and the improvements in thrifting some of the heavies, do you think we could reach a stage where we begin to see additional heavy rare earth sales to third parties, similar to what we saw this quarter?
Yes, I can address that. Max, at this moment it is Ryan. We are focused on making sure our current magnetics customers have secure supply; however, there is definitely a scenario where, taking what Jim mentioned, we examine certain performance applications we currently have that do require heavy rare earths via GBD, where we might not actually need them. And that is in fact far nearer to reality today than I would have believed three months ago. So there is a scenario where that becomes reality from a dysprosium and terbium standpoint. What you have certainly seen from us is careful consideration regarding the other heavy rare earth markets, where needs vary widely—especially the gadolinium announcement we made last quarter. I believe the sale you saw this quarter is in many respects emblematic of the embedded value on our balance sheet right now that I do not think is being properly appreciated; it is not solely heavy rare earth concentrate, and frankly it does not include light rare earth concentrate on the balance sheet that carries potential value worth hundreds of millions of dollars. The same applies to the heavy rare earth concentrate. I think the results you saw this quarter—though the sale of SEG+ specifically is somewhat of a one-off to support a strategic customer—if you consider the margin potential of the products we will bring to market shortly, I think it speaks to the value, the incremental value we will be able to create out of Mountain Pass and why we have been investing so thoughtfully in this heavy rare earth capability.
That's really useful context. Thanks, Ryan, Jim. I'll hand it back over now.
Thanks
Hi, Carlos. Are you on the line?
Yes, my apologies. Is my voice coming through?
Yep, please continue.
Yeah. Great. Yeah, thanks. Good afternoon, gentlemen. My question is about whether, given the recent performance of the share price, you might be looking at share buybacks. You ran a great program in 2024. Look, I understand you're growing and investing, but there also could be value — there is value at these levels in your share price. I wanted to hear your thoughts on that.
Yeah. Sure, great question. Obviously, we're quite surprised. As I mentioned in the opening remarks, there are a lot of currents at play in this market that I think are broadly unrelated to us. If I had to guess, you're seeing a lot of pods and tax arbitrage strategies putting pressure on certain sectors, and ours is one of them. You really have these macro-level quantitative forces hitting our sector, tied to some others. What I'd say is that I think what sets us apart is that we have contracted cash flows, and then obviously we have this material upside strategic value, given the niche we're in. I think we seem to be correlated with some peers that need to raise enormous amounts of capital, that don't have balance sheets commensurate with survival, that don't necessarily have assets that even with time would represent the value. I think there's this overall macro downdraft on the sector. Obviously, then there are some political considerations that may be happening with some of the others. I don't think that reflects on us. I think if you look, all we have to do — and we don't take this lightly — but all we have to do is execute, and our cash flows, you can do the math on that and the upside. We do believe there's, as I said, material upside. But I think what's really important is that we have to make sure we maintain our fortress balance sheet to continue, so that we have the runway to be opportunistic through. Although I feel really great about our strategic positioning, our business, our ability to execute the niche we're in, I will say — and I think probably, again, my remarks probably reference this — but I do expect the months and year ahead are going to be significantly challenging financially. There's a lot of disarray in the market right now. It would not surprise me if we see some of the credit issues continue to play out across private credit and maybe the insurance industry that's loaded up with a lot of that. I think there's an entire rethinking around the returns on capital happening; and I think there's, for those of us who've been in the markets a long time, these things are never up and to the right. It would not surprise me to see a real global macro financial setback. For much of this quarter or the last two, inside MP we've had that possibility squarely in view; we've mentioned it during these calls, and we've essentially been securing the hatches, making sure we think carefully about each dollar we spend; and when we survey opportunities out there, avoiding wasting capital, since I believe there will be some outstanding chances for us to — for want of a better comparison — sort of clear out the trash, if you will, in the period ahead. That's an extended way of setting out how I see the current environment. And then clearly, finally, regarding particular capital actions, as you're aware, we never signal those in advance. We'll clearly act first and then inform you, but ideally you can count on us staying opportunistic the way we have been.
Thanks, Jim. I appreciate it. So, digging in a bit further on that SEG+ sale you made. What did that revenue cost you, if you're able to say? And, perhaps more to the point, were those tons actually delivered, or did you sell them — did you monetize them, or will you monetize them — yet plan to use them to make magnet for that customer later on?
Yeah. Hey, Carlos, Ryan here; we won't discuss the specifics of the contract. You can likely infer from our filings that this was a sale to one of our existing strategic customers. I'd point out that this product has now been sold. We neither intend to nor are able to reuse it. This is a use case that isn't focused on magnets. Again, I think it kind of illustrates the wider opportunity set in the heavy rare earth business we're building. Obviously, at this stage, as we're entering production of the initial set of separated heavy rare earths the team is working on, then expanding into gadolinium and samarium, I think we've made clear that there are probably some further opportunities in other separated heavies for us to look at. This is kind of an early sign of the potential of that business.
Fair enough. Thank you, Ryan.
Thanks.
Hey there, good evening, everybody. I believe most of the questions I had have actually already been asked and answered, but perhaps we could discuss recycling a bit — any update you can share there. Then my second question would maybe concern Project Swarm, which you announced a few months back. Is there any update on that which we might expect perhaps for next year, like over the coming months? Thank you.
Hi, Corinne; this is Michael. Regarding recycling, solid progress at both of our sites. At Mountain Pass, engineering is advancing, and construction is underway. We've procured all long-lead equipment. On the magnet production side itself from recycled materials, equipment is beginning to be delivered and installed. Our teams are collaborating closely with our customer on developing magnet grades, prototypes, and specifications so deliveries can start next year. The collaboration has been great so far, and we're very excited about it.
Then, Corinne, regarding Project Swarm—since that involves the defense supply chain, we'll aim to be careful and considerate in what we say—but what I can tell you is that the response has been overwhelming; it's wonderful to see. Just to provide a bit of context, the aim of Project Swarm is this: when we surveyed the landscape—drones clearly being the future of warfare—and looked across the American defense supply chain, we discovered that a lot of the producers had magnet specs whose purpose they didn't really understand. They were sourcing motors from China, whether via another location or not. Our role here, as we see it, is to assist in standardizing the domestic industry around specific grades and to collaborate with some of the downstream producers, helping them do what they do best and ensuring the supply chain was available to them, so they don't have to worry about procuring or investing capital in capacity they may or may not need. On this front, I think we're playing a really important part in the country's defense supply chain, and the response has been outstanding, and we're glad to do it. I doubt we'll provide many updates past this, but that's the overall picture.
Great, thanks. Maybe there's room for one more. I think you devoted a few minutes—in fact, likely somewhat longer than usual—to robotics and to just how far you could genuinely move the demand balance in that area. What I'm really wondering is whether some of the conversations you're having with customers are already moving that way. Are there already customers approaching you for magnets meant for robotics? Or perhaps a broader strategic question: do you have a preference, and do you perceive any strategic distinction when it comes to pricing between defense and robotics, or are you essentially indifferent?
Yeah, good question. That's exactly what I had in mind earlier on this call, Corinne, when I brought up the idea of the theoretical turning into the real. We're in talks with the names you'd expect and already know — and clearly there are plenty of those — plus some world-class global big tech players and other kinds of companies that are moving into this area. What we keep seeing everywhere is a huge level of investment, attention, and acknowledgment that this is the frontier of economic opportunity as super intelligence enters the physical world. So those conversations are happening. And actually, if you saw what happened last night, Beijing stopped SoftBank from buying ABB's robotics unit. So obviously all of us here in this country are caught up in plenty of politics this week, but we can't overlook the fact that global competition is happening out there, and that supply chain matters enormously; so what we're seeing is that this is becoming more targeted. Regarding what you asked about the business — that's the reason I brought it up. My belief is that since our platform is quite distinctive, this will be a very high-margin business for us. We also have the balance sheet and the contracted structural advantage for 10X to carefully consider how we bring that factory online for this sector and others. So while we expect it to be genuinely economically attractive and plan to be patient and thoughtful about it, what we're seeing has us really encouraged.
Excellent. Thanks a lot.
Hi, Bill. Are you there?
Yeah, apologies for that. Is this coming through now?
Yes, it is.
Okay. Apologies for that. What I'd like to do is ask about NdPr output, and really how we ought to think about the ramp as we go into next year, factoring in any downtime that's typical for you. In effect, at what point should nameplate capacity be reached? And also, what could push it past nameplate — further efficiency gains, or incremental investments? Then perhaps you could address the cost side: when normalized costs might arrive, and how the Chlor-Alkali facility could affect that.
Thanks, Bill. It's Michael here. I'll begin and then hand over to Ryan. As I said in my remarks, during part of the third quarter we managed to operate at a run rate above 450 tons per month. That, I think, confirms in my mind that we can reach that sort of targeted run rate with the assets we already have; we still need some optimization and debottlenecking before we can hold it for a whole month or quarter; but it's clear we're capable, and I'd expect that across the coming several quarters we'll arrive at the point where we can do so. Looking at 2027, several projects come online next year, notably the Chlor-Alkali facility, whose first phase we'll kick off around the first quarter. That project matters a great deal to us — it adds resilience, should hopefully bring down our cost structure, better our environmental footprint, and cut dependence on third parties and on certain tight chemical reagents that make up a very meaningful share of our costs. Getting it running will be a major undertaking with major consequences for site infrastructure overall. From that, along with recycling some of the extra heavy rare earth investments, we'd anticipate some added downtime next year, and that's already baked into our expectations. Even so, we'd expect to run at a production rate of over 5,000 tons per annum for the year.
Great. Thanks for that, Michael.
Yeah, regarding what you asked about the cost structure, I think all of the points Michael just laid out also address the portion of your question aimed at me. The fact is, once we've gotten through a number of these de-bottlenecking initiatives, bear in mind that de-bottlenecking comes at a cost, and so does the startup of Chlor-Alkali and heavies. I think 2027, particularly as we reach the latter half of the year when our first train of Chlor-Alkali is online, we've made headway on heavies, and we're producing consistently on a normalized basis at that 500 tons a month production level. That's the point where the leverage and cost structure will really become visible. In some respects, we're already beginning to see that now. Consider Mountain Pass's scale, and the fact that NdPr has essentially been the sole revenue product carrying nearly all of the shared infrastructure, and we'll reach a stage where dysprosium and terbium—along with our other heavy rare earth products—will take on a portion of those shared infrastructure costs. When you consider the complete, actual cost of producing NdPr, factoring in every one of these optimizations along with the growth and throughput we anticipate, I have great confidence that we can keep pushing the cost structure lower.
Yeah. Thanks for those remarks. I'd like to pose a question about the magnet ramp that's framed a bit differently from some of the earlier ones. First off, congratulations on the qualification. I suppose when we consider the route toward roughly the nameplate 1,000 tons for your lead customer, and then stack on top of that the following tranche for the second customer, my question is this: is it limited by your own output or capability or yield, or by the demand cadence from these customers? If it's the former, which areas are you aiming to de-bottleneck or work on to improve yields? If it's the latter and you have the capacity, are there ways to ship these magnets to other—is there demand, basically, from other players that could absorb the capacity?
Yeah, sure. I can begin on that. The way I'd think about it is that magnets are highly customized engineered products, and our focus is making sure we're ready to meet the demand of our foundational customers as we continue to get placed into the specific programs and plants we're targeted to be in, which isn't an overnight process. We're focused on making sure that each of the areas of the plant is reaching the sort of throughputs that are necessary to meet a forecast we're planning to; we have visibility, of course, into these various programs and various additions to the plants. It's not one or the other. It's really that feathering into the automotive supply chain is a relatively complex process. At the same time, there's significant expansion ongoing at Independence to support our next major customer there. The focus really is on executing for the two of them first and foremost, getting those programs well ramped and well optimized, then taking further opportunities as they come.
To restate the point, as our foundational customer goes live and then Apple comes on board next year, from a risk management perspective, those 2 customers are where our entire focus sits. They matter enormously, and we intend to get things right for them. I believe our approach to building this business has been methodical. Had we wanted to sign a large volume of business and simply accept whatever came our way, we could do that easily. That is not the philosophy we have followed. It is entirely about executing properly and thoughtfully, and then, clearly, once 10X goes live, we will take that same approach.
Hey there. Good evening, everyone. Appreciate all the detail. Perhaps just on heavy, and I realize you guys touched on this somewhat. Jim, you mentioned having heavies on site, and I also gather you'll be using fewer heavies, but I'm just curious how much of Independence you're covered for with what's in inventory. Then regarding your own production, if you could just explain how we should think about that in terms of ramp and potential revenue contribution down the road.
Yeah. Hey, Ben. This is Ryan. On that point, what we've said consistently is that for Independence, where clearly we're beginning production with EV traction motor magnets and then expanding into other products with our next customer set, we believe we're fully covered for everything we need at Independence from just the output of our own ore body. Obviously, we've also discussed the fact that the heavy rare earth separation facility is designed to accept third-party feedstocks, and we're actively in the market sourcing those as we speak. From that angle, we remain very, very confident. As for 10X, I think we've mentioned previously as well that we have a partnership with Department of War on that front that protects us there, and that has made excellent progress.
I'd like to ask a follow-up about the heavy production at Mountain Pass — what's the right way for us to think about how that contributes to revenue?
Ben, my view is that since we'll be consuming those products internally for the foreseeable future, what you'll see early on is intercompany revenue that gets eliminated during consolidation. Eventually, though, as the heavies find their way into magnets, we'll recognize that revenue through the magnetics business over time. One more factor is that during the initial phase of output at Mountain Pass, we believe we've taken a careful approach in how we're building our stock of heavy rare earths intended for magnets. That means there could be a stretch when what we make goes into our own inventory before eventually becoming part of a magnet and being sold. Given that, we're not offering guidance right now on particular revenue figures for dysprosium or terbium. Once we have additional information to share with you, we will. What you'll begin to notice, I believe — Michael referenced this during his prepared remarks — is that we'll generate certain appealing intermediate product streams coming out of the heavy separation process before we move into finished samarium oxide and gadolinium oxide production. Those represent potentially very substantial margin opportunities for us. Once again, we aren't providing many specifics on that right now, but I'd say it's a very meaningful opportunity for the material segment. And then, naturally, we've discussed 2028 as the period when our gadolinium contract begins, and we're examining additional opportunities too.
Thanks, Ryan.
Richard, please check that you're not muted—we're unable to hear you. Are you with us?
Sorry, can you hear me now?
Yes.
Yeah.
Oh, I've lost you once more.
My apologies, Richard. The connection is cutting out on you. Give it another try.
Can you hear me now? Hello?
Yes.
Okay.
Yes.
All right, let's give this one more go. I'm just wondering — during the qualification process, did anything catch you off guard? Were there best practices you feel you picked up that could help make the process better, whether on the procurement side or in terms of how you essentially set up the lines, where we might find incremental gains in margin and optimization as you ramp up in 2027?
Yes, Richard — this is Ryan. Great question, and the answer is an absolute yes. I'd say this is among the best aspects of our partnership with General Motors; we chose to get into the magnet business and begin with automotive for several reasons. Clearly, it represents a substantial share of the market, but it also happens to rank among the most demanding technically, and without question it's the most difficult on quality. Qualification isn't about whether you build a product to our spec or simply hit performance targets. It comes down to each individual piece of equipment. How do you operate it? Which standard work instructions are in place? What safety characteristics does it have? How does material move across the floor? It is extraordinarily rigorous. I'd probably offer another shout-out to our magnetics team for how tirelessly they've pushed this process forward and, honestly, to the General Motors team for being so thorough and supportive. Going from a standing start in 2021 to reaching this point is something I believe this whole team takes enormous pride in. It has definitely made us better, and there's plenty more still ahead.
Great.
Yeah, Richard, yep.
Okay, thanks to all of you. It was a really strong quarter, and clearly there are plenty of fascinating shifts and a lot of turbulence going on out there, so our best wishes go out to everybody, and we look forward to meeting up with you once more in the next quarter.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete MP Materials Corp. transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to MP Materials Corp. earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.