Home / Transcripts / NanoXplore Inc. (GRA) · May 14, 2026

NanoXplore Inc. (GRA) Earnings Call Transcript

May 14, 2026

Toronto Stock Exchange CA Materials Chemicals earnings 23 min

Earnings Call Speaker Segments

Operator operator
#1

Hello, and thanks for being with us today. Welcome to NanoXplore's earnings conference call for the third quarter of 2026. Right now, everyone is in listen-only mode. Once the speakers finish their presentation, we'll open things up for the question-and-answer session. If you'd like to ask something during that session, press *11 on your phone's keypad. An automated message will then confirm that your hand has been raised. Should you want to take your question back, press *1 and 1 once more. Please note that this conference is being recorded today. I'll now turn the conference over to today's first speaker, Liam Turner, General Counsel and Corporate Secretary. Sir, the floor is yours.

Liam Turner executive
#2

Hello everyone, and welcome to NanoXplore's third-quarter 2026 conference call. Good morning, all, and thanks for being here as we discuss NanoXplore's financial and operating results for Q3 of fiscal 2026. We issued the press release with these results yesterday after the market closed, and you can find it on our website as well, together with our financial statements and MD&A. Those documents are posted on SEDAR+ too. Before we get started, I want to remind you that today's remarks, including management's outlook and responses to questions, contain forward-looking statements. These forward-looking statements reflect our expectations as of today, May 14th, 2026, and as such, they are subject to change. Statements of this kind rest on assumptions that may not materialize and carry risks and uncertainties. Actual results could differ materially, and listeners are cautioned against placing undue reliance on these forward-looking statements. You can find a description of the risk factors that may affect future results in NanoXplore's Annual Information Form, which is available on our corporate website and in our filings with the Canadian Securities Administrators on SEDAR+. Joining me on the call this morning are Rocco Marinaccio, our Chief Executive Officer, and Pedro Azevedo, our Chief Financial Officer.

Liam Turner executive
#3

Once Rocco and Pedro have finished their remarks, we'll open up the call for questions from financial analysts. At this point, I'll hand things over to Rocco.

Rocco Marinaccio executive
#4

Hello, Rocco, Liam, and everyone. I'm Rocco Marinaccio, President and CEO of NanoXplore, and it's a pleasure to have you join us today as we go over the results for our fiscal third quarter of 2026. I'll begin with the main financial figures. Revenue came in at $32.3 million, with adjusted gross margin at 22.9% and adjusted EBITDA of $1.2 million. On a normalized basis—leaving out one-time items from the prior year—all three metrics improved both sequentially versus Q2 2026 and year over year. The direction is unmistakable, and we are delivering. The momentum built during the first half of this year is carrying forward. Revenue, gross margins, and adjusted EBITDA each rose this quarter, supported by consistent volumes from the Club Car launch in Statesville, ongoing recovery in our transportation segment, and TriboGRAPH sales, our lubricant product, all of which match what we expected. Now I'd like to bring you up to date on the four priorities I laid out in my recent shareholder address. First: execute with discipline and deliver on our commitments. We told you Q1 marked the trough. The last two quarters have borne that out, with sequential gains on the key business metrics. Looking to the medium term, we expect that momentum to pick up speed, powered by the growth impact of graphene and graphene-enhanced solutions.

Rocco Marinaccio executive
#5

Regarding our dry graphene production method, we promised it would be operational by early April, and we came through on that. The equipment has been switched on and is running mechanically, and in keeping with our rigorous manufacturing protocols, the team is carrying out a disciplined scale-up. Qualification of commercial material should get underway in Q4, which puts us in position to fill customer orders from this new platform during fiscal 2027. This isn't some pledge for down the road. The technology is operating today and moving forward through scale-up. Second: growing into new markets and applications. Worldwide, NanoXplore holds the biggest graphene production capacity, the highest purity, the most competitive pricing, and now multiple product grades serving multiple industries. Nothing else matches that combination. The clearest illustration of graphene as a disruptive technology is our recently announced XGnP D500 HP product. With 99.8% purity and a surface area of 500 m²/g, verified at commercial production volumes, D500 HP was purpose-built for the conductive carbon additives market — a $3+ billion space presently dominated by carbon black and carbon nanotubes across applications such as lithium-ion battery electrodes, electrostatic discharge safe plastics, and conductive coatings. D500 HP matches incumbent products' conductivity, is price competitive, and delivers twice the flexural strength and stiffness.

Rocco Marinaccio executive
#6

So what that means is customers can now get conductivity without having to sacrifice strength. D500 HP is going to be priced competitively against conductive carbon blacks, so customers get graphene-level performance but don't pay a graphene-level premium. This isn't some emerging opportunity anymore. Competing in large carbon markets is a reality for NanoXplore today. Number three: turning our growing pipeline into sustained revenue and cash flow. This is where our capital investments are starting to pay off in a tangible way. We've previously announced $50 million in business wins for our Solutions business. Of that amount, $15 million has been successfully launched in Statesville with Club Car, on time and on plan. The remaining $35 million will ramp over the next 18 months as part deliveries begin in line with customer forecasts. These are contracted revenues with clear timelines. For the first time in our company's history, we have a clear line of sight to free cash flow generation. As these programs ramp and revenues are recognized, the financial profile of this company changes materially. That inflection point is now within reach. On TriboGRAPH, our partnership with Chevron Phillips Chemical continues to advance. We're progressing through new end-user customer lab and field trials, actively co-promoting the product with a growing list of major customers across multiple geographies.

Rocco Marinaccio executive
#7

Customers are validating the product as it was meant to work, as they shift from lab testing into field trials. TriboGRAPH cuts drilling times by as much as 20% by reducing the coefficient of friction and boosting lubricity, which delivers enormous value to the end user. That is a plain example of how our innovation is producing huge breakthroughs in sectors that had gone stagnant for many years. Point four: drive shareholder value. We back our conviction with action. In recent months, our leadership team and board have made meaningful insider share purchases. We are shareholders as well, and our interests on outcomes are aligned with yours. With new product grades such as D500 HP opening adjacent billion-dollar markets, and contracted revenues ramping up in our Solutions business, we think the market has not yet fully reflected the value being built at NanoXplore. We will keep communicating openly and regularly with the investment community as that value is realized. In summary, we are executing on our commitments, expanding our addressable markets, converting our pipeline into revenue, and investing in shareholder value with both capital and conviction. NanoXplore's story is one of compounding progress, and Q3 is another step forward. With that, I'll hand it over to Pedro to walk you through our financial results.

Pedro Azevedo executive
#8

Thank you, Rocco. Hello, everyone. Good morning to all of you. I'll start today by going over our Q3 financial results, then give an update on the financial side of our expansion initiatives, and finish with some comments on near-term CapEx spending and revenue guidance for fiscal year 2026. Q3 total revenues came in 6% above the same quarter last year, at $32.3 million. The main driver of that gain was new revenue streams from the Club Car program, shipments under the CPChem contract, and higher tooling revenues as well. Those gains, though, were partly offset by reduced revenues from government grants, which had been unusually high last year, and by lower revenues from our two biggest customers, whose volumes are improving but remained below last year's level. Even so, our revenues are up by almost 40% since Q1. Adjusted gross margins, excluding depreciation, stood at 22.9% of sales, which is 50 basis points above last year's 22.4%. We're happy to see gross margin improve, though the gain was capped by a larger mix of tooling revenues, which carry lower margins. With volumes continuing to recover and powder sales rising, we anticipate margins will keep expanding over the coming quarters.

Pedro Azevedo executive
#9

Adjusted EBITDA came in at $1.2 million, which is down $240,000 compared with last year. Within last year's adjusted EBITDA, there was $550,000 in grant revenues that represented a one-time benefit. Taking that out, Q3 2026 adjusted EBITDA would have been $350,000 above last year's figure. Turning to the segments, adjusted EBITDA in the Advanced Materials, Plastics and Composite Products segment was $1.25 million, down $80,000 from last year, while the Battery Cells and Materials segment posted a loss of $60,000, a decrease of $160,000 versus last year. On the balance sheet and cash flows, we finished the quarter with $24.4 million in cash and cash equivalents and $16.8 million in short-term and long-term debt. Combining our cash with the unused capacity under our revolving credit lines gave total liquidity of $34.4 million as of March 31st. Operating cash flows were negative $3.5 million, driven mainly by an increase in working capital, largely from higher sales and payments to suppliers on tooling projects. Cash flows from financing activities were positive $900,000, coming from equipment financing offset by repayments of debt and leases. Lastly, cash flows from investing activities were negative $3.2 million, primarily because of capital expenditure payments. As of the end of March, the company had spent a cumulative $2 million in cash on capital expenditures for projects in progress that will be financed in Q4.

Pedro Azevedo executive
#10

Also, in light of the February ruling by the US Supreme Court concerning IEEPA tariffs, we anticipate collecting $500,000 to $700,000 in IEEPA tariff refunds over the next few months. Those tariffs were paid on imported equipment that was installed in Statesville, North Carolina. Now shifting to a financial update on our expansion efforts. To recap, our initial focus covered three primary areas: anode materials, dry process graphene, and expansion of graphene-enhanced SMC and composite materials. As we explained on last quarter's analyst call, we chose to drop the CSPG anode materials initiative and proceed with the remaining two. On dry process graphene, the first module — of what we anticipate will be multiple production modules — is installed, and we are currently scaling up that production line. On the graphene-enhanced materials initiative, the equipment is running in Statesville, North Carolina, and we are in the final phases of scaling up the equipment in Beauce, Quebec. Accordingly, we anticipate that by the close of our fiscal year 2026 the equipment will be installed and operating, creating new revenue streams in fiscal year 2027. Now moving to our near-term CapEx spending and fiscal year 2026 guidance.

Pedro Azevedo executive
#11

Capital expenditures for the quarter came in at $3.2 million, a bit below the $4 million to $5 million we had anticipated. The reason was timing—a portion of those costs landed in early April. For Q4, we expect to invest $2 million to $3 million in order to finish the graphene-enhanced materials initiative and the dry process graphene line initiative. After both of those projects wrap up, we anticipate CapEx dropping substantially, to under roughly $1 million each quarter, not counting new initiatives. As for our fiscal year 2026 guidance, we remain confident in the previous guidance we provided: full fiscal year revenues will land between $115 million and $120 million.

Liam Turner executive
#12

Thanks, Pedro. Operator, at this point we can take questions from the line.

Operator operator
#13

Thank you. As a quick note for everyone joining, should you want to pose a question, just hit *11 on your phone's keypad, then hold until we call out your name. If you'd rather pull your question, simply press *1 and then 1 once more. Please remain on the line while we put together the Q&A list. That will take a short while. We're now ready for the first question, which is coming from James McGarragle at RBC Capital Markets. Your line is live — go ahead with your question.

James McGarragle analyst
#14

Morning, everyone. Thanks for inviting me to join you.

Rocco Marinaccio executive
#15

Good morning there, James.

James McGarragle analyst
#16

Good morning, James. I just had one question. We heard some fairly upbeat demand remarks coming from Volvo and PACCAR. Could you roughly put a number on the volume increase you expect from those two customers going into FQ4, and how much your guidance range would move if heavy truck production rates were to soften?

Rocco Marinaccio executive
#17

Sure thing, James. We experienced softer demand for that volume as we entered Q1, correct? From that point on, it has been climbing steadily, and we expect that demand to keep rising from now through the close of the calendar year. Industry volumes continue moving in a favorable direction, and we stand to gain from that in the period ahead.

James McGarragle analyst
#18

On gross margins, I'd say they landed somewhat below what I had anticipated, particularly considering the stronger top line. You mentioned the softer tooling revenues and volumes, but how should we view the normalized gross margin run rate heading into Q4 and then into fiscal 2027, as some of these new programs ramp up?

Pedro Azevedo executive
#19

Hello again, James — Pedro here once more. Regarding margins, they came in somewhat softer than we'd ideally have wanted. We're with you on that, and the cause really stems from the fact that we're ramping up certain operations over in Beauce. With volumes climbing, we've had to bring some staff back on, and there have been what you might call minor inefficiencies at the overhead level that could have diluted the benefit we got from gross margin improvements. I'd describe that as a timing-related matter. As for how things look over the coming quarters, we anticipate Q4 margins will land roughly consistent with what we've just seen, with a bit of improvement — perhaps an additional 50 basis points, say, as we move through Q4. Looking at Q1 and beyond, I believe you'll keep watching that adjusted margin expand further as new revenues keep coming online. Those new revenues Rocco has discussed, the ones we've been talking about for some time now, aren't really a ramp-up in nature — they're far more of a start-up situation. Many of these projects will be getting underway, and they'll deliver incremental revenues accompanied by only limited extra overhead.

Pedro Azevedo executive
#20

So once more, across the coming three quarters, margins ought to keep climbing by no less than 50 basis points as we move into Q4, and after that they should rise progressively a bit further as we head into Q1 and Q2.

James McGarragle analyst
#21

Thanks for that added detail — I'll now hand things over.

Rocco Marinaccio executive
#22

Appreciate it.

Pedro Azevedo executive
#23

Appreciate that, James.

Operator operator
#24

Thanks. We'll move on to the next question now. This one is from Michael Glen at Raymond James. Your line is open — go ahead and ask.

Michael Glen analyst
#25

Hey Pedro, regarding the gross margin you just described, is that 50 basis points, and is it sequential from the Q3 gross margin?

Pedro Azevedo executive
#26

Right, that's accurate. We're anticipating that margins in Q4 will improve a bit more relative to Q3.

Michael Glen analyst
#27

Next, I was hoping you might go a bit deeper on CPChem for us. Where are you observing the product deliver the strongest results in terms of application? Are certain drilling types involved? Do particular regions stand out? I'd just like to hear whatever you can share on that.

Rocco Marinaccio executive
#28

Morning, Michael. Once again at CPChem, the value we're delivering is enormous, correct? We lower the coefficient of friction, boost lubricity, and cut drilling time by 20%, right? You're correct that these are specific applications for horizontal drilling in very tough environments, right? This is a premium-based product. You wouldn't use it in an area like the Permian, where drilling is soft, right? Places in North Dakota, the Colorado Rockies in the US, western Canada, similar terrain in South America, right? In Australia, for instance — all of these are applications where the product is being tested and trialed right now. No negative feedback has come from anyone testing, right? Everyone moving from lab-scale into the field confirms the results again and again, right? Some of the projects CPChem is working on at the moment — it's almost like you're quoting for a program that launches in 6 months to a year, right? People are specifying the right type of lubricant for a drilling application launching 6 months from now, right? Working across all different ends of the spectrum. We have converted customers who are drilling today. There are commercial customers purchasing TriboGRAPH into NanoSlide and using NanoSlide today.

Rocco Marinaccio executive
#29

CPChem is concentrating heavily on several high-volume applications, with launches expected around late this year and continuing into calendar year 2027.

Michael Glen analyst
#30

I just want to make sure I understand: is this something you can buy as a standard product, or does the formulation have to be tailored to each drilling application, each customer, or each region?

Rocco Marinaccio executive
#31

It's off-the-shelf. Much of the formulation effort—those 2 years we spent working alongside them—went into developing a formulation. That work is complete. Whatever work Nano has carried out, whatever work CPChem has carried out in the lab, all of it is finished. This is an off-the-shelf product. You can purchase it today as a drop-in replacement for the competitive lubricants currently available in the marketplace.

Michael Glen analyst
#32

All right. So when it comes to the way your supply agreement is structured, should we anticipate that the contribution each quarter might come in uneven chunks, or would you expect it to be more even?

Rocco Marinaccio executive
#33

That's a tough one to pin down. At the moment, we have a handful of commercial accounts, plus plenty of others running trials at various stages, correct? The more of those accounts move into commercialization, the faster that ramp curve climbs, right? This space has plenty of major companies trialing the product as we speak. Should one of them land and switch over their fleet rapidly, the ramp would occur far more swiftly, correct? Four blenders are in operation across North America at present, meaning we can reach geographic areas fast. Turning those blenders on involved a process. We're set to ramp, and CPChem is out there actively marketing, so.

Pedro Azevedo executive
#34

What I'd probably add here is that we're likely to see this come in steps. As some of those larger customers come on board, you get a significant jump at that moment, followed by a period of stability, then another jump at a later point, and it continues that way. That's the pattern we believe will probably play out as time goes on.

Michael Glen analyst
#35

Once those volumes scale up, that ought to give gross margin a lift, right?

Pedro Azevedo executive
#36

Sure. One thing to always keep in mind is that a big portion of our business sits on the Solutions side, and proportionally it makes up a large share of what we do today. Many of these TriboGRAPH sales will remain a portion of the total, but they have a meaningful effect on gross margin benefits. I've mentioned repeatedly that as TriboGRAPH and other graphene sales increase, they add gross margin in a very powerful way. On the revenue line you'll notice it less clearly, but proportionally it adds much more to EBITDA.

Michael Glen analyst
#37

Appreciate you fitting in our questions.

Pedro Azevedo executive
#38

Appreciate it.

Operator operator
#39

Mike. Thanks. Thank you. To everyone joining us, one quick reminder: should you want to pose a question, just hit *11 on your phone's keypad. To our speakers: that brings us to the end of the question queue for today. At this point I'll pass things back to the management team in case they have any closing comments.

Pedro Azevedo executive
#40

Thanks so much to all of you, and I hope your day is a great one.

Operator operator
#41

That brings us to the end of today's conference call. Thanks for joining us. Everyone may now disconnect. Have a nice day.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete NanoXplore Inc. transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to NanoXplore Inc. earnings transcripts and 132,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.