Home / Transcripts / NanoXplore Inc. (GRA) · September 15, 2026

NanoXplore Inc. (GRA) Earnings Call Transcript

September 15, 2026

Toronto Stock Exchange CA Materials Chemicals earnings 51 min

Earnings Call Speaker Segments

Liam Turner executive
#1

Good afternoon, everyone, and thanks for being here as we discuss NanoXplore's financial and operating results for the fourth quarter of fiscal 2026. We issued the press release with these results after the market closed today, and you can find it on our website together with our financial statements and MD&A. Those documents are posted on SEDAR+ as well. Before we start, please note that today's remarks, which include management's outlook and responses to questions, contain forward-looking statements. These forward-looking statements reflect our expectations as of today, September 15th, 2026, and are therefore subject to change. They rest on assumptions that may not materialize and carry risks and uncertainties. Actual results could differ materially, and we caution listeners against placing undue reliance on these forward-looking statements. You can find a description of the risk factors that may affect future results in NanoXplore's Annual Information Form, which is available on our corporate website and in our filings with the Canadian Securities Administrators on SEDAR+. Joining me on the call today are Rocco Marinaccio, our Chief Executive Officer, and Pedro Azevedo, our Chief Financial Officer. Once Rocco and Pedro have finished their remarks, we'll open the line for questions from financial analysts.

Liam Turner executive
#2

Rocco, I'll hand things over to you now.

Rocco Marinaccio executive
#3

Thanks, Liam, and good afternoon, everyone. I'm Rocco Marinaccio, President and CEO of NanoXplore, and I'm glad you could join us today as we go over the results for our fourth quarter of 2026. Looking back at fiscal 2026, this company achieved some enormous breakthroughs and advances, and I can state confidently that NanoXplore has never been in a stronger position than it is right now. Our cash position is solid, we have a robust $35 million pipeline of graphene-enhanced solutions business launching over the next 18 months, and a set of exceptional, high-margin graphene opportunities is developing across multiple end markets. We began the year more slowly, since volumes in our solutions business were climbing back from their lows, but the momentum we built from that point was significant. We launched our state-of-the-art facility in Statesville, North Carolina, supplying exclusively for Club Car. We formalized our partnership with Chevron Phillips Chemical, or CPChem, and are actively promoting and driving commercial TriboGraphene revenues. Most importantly, we moved our proprietary dry process, or D-Series, graphene technology from development into commercial production, engineering and commissioning a dedicated production line entirely in-house. That capability has already led to the launch of new D-Series products, opening new markets for the company.

Rocco Marinaccio executive
#4

We also wrapped up a CEO leadership change successfully, and made our team stronger by promoting Nima Moghimian to Chief Technology Officer and Ilya Shlapnikov to Chief Operating Officer. Not one of these steps forward would be possible without our people. Colleagues at every one of our sites form the bedrock of all we have achieved this year, and I want to acknowledge how dedicated and hardworking they are. I'm proud as well to report that this year we set the best safety record in the history of the company, bringing our total recordable injury frequency down from 9.99 to 3.10, and that dedication to a safe workplace is inseparable from the operational discipline that fuels our results. NanoXplore leads the world in graphene. With annual capacity of as much as 5,000 tons, no other business out there is able to make graphene at commercial scale while keeping quality and consistency intact. More than 100 patents and patent applications safeguard our IP, product, and process knowledge, and we are among a very small group of companies with legal permission to manufacture and sell graphene in Canada, the United States, and Europe. With Environment and Climate Change Canada, Health Canada, EPA, and REACH certifications in hand, NanoXplore's regulatory standing in this industry has no equal. Back in 2020, when we constructed our first facility at 4,000 tons of capacity, we engineered it with scale in mind.

Rocco Marinaccio executive
#5

Talking to customers across a wider set of end markets made it obvious that each application needs its own graphene properties, and that realization is what our platform strategy is built around. The grades we've sold historically, the X-Series, have a high aspect ratio — in plain terms, thin, long graphene sheets delivering things like lubricity, thermal conductivity, and barrier performance. The D-Series grades we recently brought to market have high surface area, which gives attributes including electrical conductivity, EMI shielding, and UV protection. With both, we're able to hit purity of as much as 99.8% whenever a customer asks for it. Because the platform lets us tune grades to what each customer specifically requires, we avoid overprocessing the material, and that lets us set prices that are appropriate and consistent with what the market expects. Let me illustrate this platform strategy with a concrete case. Cement and concrete are global industries worth multiple billions of dollars. A widely cited study from 2018 drew attention to the performance gains graphene can deliver in cement. At that time we worked with several companies and got excellent lab results, yet in the end we couldn't turn those into commercial traction using X-Series graphene. That opportunity has been reopened by our D-Series grade, and today we're collaborating with one of the five largest cement producers in the world to bring graphene into mainstream cement applications.

Rocco Marinaccio executive
#6

We'll share further information as the partnership moves forward, though I should warn that this will require a number of months. It's early days yet, and validation of our product is still underway. Before going through each of our growth opportunities individually, I'd like to briefly lay out the thinking behind the acquisitions NanoXplore has made over the years, since I believe that gives important context for how to view our margin profile from here on. Several operating companies have been bought, and there were two reasons for doing so. The first was to make a profit. Building a new material from scratch and bringing it to market takes a great deal of time and money, and these operating businesses give us revenue and cash flow along the way. The second reason, which matters even more, was to show the value and real-world performance that graphene delivers in actual applications. Graphene has been successfully integrated by NanoXplore into the majority of the products we make and sell today, and that record is a major factor in why customers have confidence in us to deliver at commercial scale. The graphene benefits our customers see are why we have a substantial pipeline of business launching across the coming 18 months — a pipeline we expect to extend the EBITDA-positive base we've established and carry NanoXplore toward generating free cash flow on a sustained basis.

Rocco Marinaccio executive
#7

With that being said, I want to make it clear how this mix is reflected in our margins at present. A lot of the products that get sold through the operating companies we already have carry a lower overall margin profile, since graphene accounts for a comparatively small share of the finished product, usually with loading below 5%. As the newer graphene opportunities start to scale, we anticipate that mix shifting in a meaningful way. Such applications typically call for a higher graphene content, and so they come with considerably stronger margins. TriboGraphene illustrates this well. It goes to market as 100% powder, free of the same raw material pass-throughs or transformation costs that thin out margins in certain of our finished product businesses. Masterbatches likewise rank higher on the value curve, pairing plastic with graphene loading levels that are meaningfully greater than what we see across the majority of products from our existing operating companies. As these newer applications — with higher loading and higher margins — turn into revenue over the years ahead, we expect them to drive a substantial portion of margin expansion for NanoXplore overall. With that context in mind, I'd like to take you through five specific opportunities in which we're seeing this platform strategy turn into genuine commercial momentum. To begin with drilling fluids and our TriboGraphene technology, I want to speak candidly, because we recognize this is an area investors have been monitoring closely.

Rocco Marinaccio executive
#8

Just to remind everyone, on September 18, 2025, we announced a multiyear supply agreement with CPChem covering sales of TriboGraphene, which is our proprietary carbon-based formulation additive used in drilling fluids. That deal came out of over 18 months of really close work between the two teams, including a lot of lab testing and field well trials. The results were outstanding. TriboGraphene produced meaningful cost savings for operators, and CPChem has brought the product to market under its own brand, NanoSlide. I want to be upfront with you about where we are. CPChem's original activity forecasts reflected how strong those well trial results were. Since then, CPChem told us they lost a major prospective customer, and from what they've shared, that loss stemmed from commercial issues on the customer's side, not from how NanoSlide performed. So where do we stand today? CPChem has sent NanoSlide samples to a number of potential customers, and those customers are at various stages of evaluation right now, and importantly, every customer that has finished lab testing so far has confirmed the product performs as intended. What we're seeing now is the normal sales cycle in this industry, where validated lab performance takes time to turn into field well trials and, in the end, adoption at scale.

Rocco Marinaccio executive
#9

Although the rollout has moved more slowly than we initially anticipated, we believe it's crucial to distinguish between speed and confidence. CPChem and NanoXplore are both absolutely certain that NanoSlide is a high-performance, cost-effective answer, as shown time and again by test results from each customer that has run lab testing, and we expect it to begin capturing meaningful market share as customers progress through testing and adoption. Our focus is on helping CPChem turn that proven lab performance into well trials and long-term volume. We urge investors to see this as we do — a high-conviction opportunity whose fundamentals (proven performance, a strong multiyear partner in CPChem, and a genuine cost advantage for operators) stay firmly in place. We truly lack visibility into precisely when customers will go from validated lab results to well trials and adoption. What we do know is that it will take longer than we first expected, yet nothing we've observed alters our confidence in the commercial potential of this opportunity. I'd like to devote some time to a very exciting new growth vector for NanoXplore in insulating foams. A number of years ago, we started working with a Fortune 500 producer of insulating foam to add graphene into the formulations to improve insulation performance.

Rocco Marinaccio executive
#10

That effort has reached maturity, and ahead of final plant trials aimed at 2027, their formulation is now being optimized. What's especially exciting is that the knowledge gained through that application has carried over directly into wider market traction. We currently have active development programs running with major producers that account for approximately 80% of North American market share in this category — a testament to just how differentiated our graphene technology is in this application. It's encouraging that several of these programs remain on track to commercialize during fiscal 2027. One major customer in particular is moving to outright replace their current additive with our graphene product, and is in the final approval stages to start purchasing volumes for what we expect will be an immediate conversion. From the demand signals that customer is showing, we anticipate 1,000 tons of masterbatch at 30% graphene loading levels in the first full year of production, with space to grow from there as the relationship matures. Later this year, we expect to begin supplying graphene-enhanced masterbatch. Beyond that lead customer, several others are in advanced plant trials, and the results so far are very encouraging for further commercialization over the next year.

Rocco Marinaccio executive
#11

We're also happy to report that NanoXplore has just signed a letter of intent with a top global manufacturer in graphene-enhanced polyurethane foams, or PU foams. Through this deal, the partner would buy graphene powder from us and make shelf-stable liquid dispersions in polyol — the precursor used in PU foam production. This partner has a broad customer base spanning both the US and Europe, and importantly, they helped us spot a compelling value proposition in the European foam market: graphene's potential to functionally replace a widely used halogenated flame retardant that faces growing regulatory pressure and is expected to gradually phase out over the coming years. That puts us in a strong position to benefit from a real regulatory tailwind in a market actively looking for alternatives. All told, we believe insulating foams are a substantial multipronged growth opportunity for NanoXplore, spanning masterbatch, powder, and now dispersion applications, and we're excited about the momentum we're building across the value chain. I'll now turn to what we believe could be one of our most transformative opportunities: industrial and consumer plastic films. On June 15th, 2026, we announced a technical innovation together with Techmer PM, our long-standing partner in graphene-enhanced plastics. To put the addressable market in context, industrial films include landscape liners, protective films, pallet wraps, and heavy-duty industrial bags, while consumer films include various types of plastic bags, trash bags, and a wide range of non-food consumer packaging.

Rocco Marinaccio executive
#12

This is an enormous category that gets used every day. The results tell the story on their own. With our graphene enhancement, we've shown over a 70% gain in mechanical strength, and we think it could let film producers cut thickness by as much as 20%, which delivers genuine savings on material costs while tensile, tear, and structural performance stay fully intact. We've also observed the potential for a substantial boost in how much recycled content can go into film formulations without giving up performance — a critical step forward for packaging manufacturers facing tightening sustainability mandates and circular economy targets. That breakthrough comes specifically from our D-Series graphene, which has delivered performance that our X-Series graphene simply was not able to reach in this application. To us, that's a genuine point of differentiation for NanoXplore. Techmer brings a broad, well-established customer base that already supplies this industry extensively, which gives us an efficient route to market. Since our June 2026 announcement, engagement has been strong. Several customers have already asked for samples and received them for testing. We expect that testing to wrap up over the coming months, and we're aiming for graphene order flow to begin in the second half of fiscal 2027. The size of the opportunity here is significant. The trash bag industry by itself is a multibillion-dollar global market, and our ambition is to show graphene's value proposition to the industry's most iconic brands — companies such as Hefty, Glad, and others who set the standard in this space.

Rocco Marinaccio executive
#13

I want to stress that although the amount of graphene added in these film applications is small—typically less than 1%—the price we charge per kilogram is considerably above what our other graphene products command. That mix suggests substantially better product margins once this business grows, which makes thin films not merely a big opportunity but a very appealing one when viewed through profitability. Let me also draw attention to what we've achieved in conductive graphene. We announced, on May 5th, 2026, the introduction of XGNP D500 HP, a high-purity graphene powder designed for highly conductive uses, among them energy storage, conductive composites, and advanced electronics. With this launch we again show our capacity to create tailored graphene materials that satisfy the exact requirements of particular end uses instead of presenting a one-size-fits-all offering. Today we sell conductive graphene to one customer in Asia, and we are actively engaged with several other customers on commercial opportunities we anticipate will come to fruition during the coming fiscal year. Products in this space carry a broad range of selling prices depending on material specifications, and they consistently deliver higher margins than our traditional graphene products—one more instance of our platform strategy converting into high-value commercial opportunities. I'd also like to discuss another opportunity that has us excited: graphene-enhanced recycled plastics for industrial applications.

Rocco Marinaccio executive
#14

Recycling plastic naturally causes the polymer's mechanical performance to deteriorate. Those lost properties can be brought back with graphene, and that ability is creating a major opportunity for us. Right from the start of our discussions with Club Car, we weren't just aiming to supply parts. The goal was always to ultimately shift their products over to recycled polymers enhanced with graphene. At present we're collaborating closely with Club Car on formulations so that performance and quality either meet or surpass the standards they currently hold, and we anticipate that conversion happening in early 2027, with our graphene and recycled polymers provided by our Canuck subsidiary — a solid illustration of how our integrated platform delivers value that a standalone graphene producer simply couldn't provide by itself. Lastly, an update on VoltaXplore. VoltaXplore is a wholly owned Nano subsidiary, and it presently runs a 1 megawatt-hour cylindrical battery production facility in Montreal, making high-performance cells in the 21700 format for highly demanding applications. Since I became CEO, we've carried out a strategic review of VoltaXplore and refocused it on validated near-term opportunities in drone and defense applications. In line with our capital protection discipline, we've restructured VoltaXplore into a specialty operating model aimed at selected markets.

Rocco Marinaccio executive
#15

With this repositioning, Volta is moving away from the electric vehicle emphasis it had before and toward defense and dual-use platforms — UAVs, UGVs, and portable electronics among them — with a particular focus on Canadian and US defense customers. Several factors underpin this: rising demand for battery cells made domestically, which trade and geopolitical developments are driving, along with procurement preferences that favor products manufactured in Canada. Thanks to production capability VoltaXplore already has in place, the company has been able to start supplying cells to interested parties for testing and qualification, and active federal programs continue to back its technology development — among them Natural Resources Canada's Energy Innovation Program and the National Research Council's Industrial Research Assistance Program. Before handing things over, I'd like to leave you with how we're thinking about NanoXplore's story at this moment. What gives this company its stability is our graphene-enhanced solutions business, together with the $35 million of new business launching over the next 18 months. We expect this to make NanoXplore free cash flow positive. That's our foundation. The real value in NanoXplore lies in the high-margin opportunities we expect to begin commercializing in fiscal 2027: drilling fluids, thin films, insulating foams, conductive applications, recycled plastics, and our repositioned Volta platform. These are the businesses we believe will meaningfully shift our revenue and margin profile over time, and where we see the greatest long-term upside for shareholders.

Rocco Marinaccio executive
#16

A few of these, such as insulating foams and thin films, should start bringing in revenue over the next 12 months. Others — drilling fluids and cement among them — hinge on schedules set by customers that are outside our full control and that we cannot forecast precisely, so we'd ask you to keep being patient while those relationships develop. Our platform strategy succeeding does not rest on any one of these alone, and that mix — a steady core business that generates cash plus a real portfolio of high-margin growth opportunities — is precisely what underpins our confidence in NanoXplore's trajectory as we head into fiscal 2027. With that, I'll hand things to Pedro, who will take you through our financial results in greater detail.

Pedro Azevedo executive
#17

Thank you, Rocco. Good afternoon, everyone. I'll start today by walking through our Q4 and full-year financial results, then give an update on near-term CapEx spending, and finish with some commentary on the coming financial year along with preliminary guidance. Before I get into the Q4 review, I wanted to note that in the same quarter a year ago, we had unusually high tooling revenues at higher margins. That stemmed from the closeout of the PACCAR capacity expansion in Q4 last year, and it masks the improvements we made on product sales and margins during the past quarter. Because of that, I'll present my review both including and excluding tooling revenues. Tooling revenues in Q4 came in 7% higher than Q4 last year, at $3.9 million. Leaving out tooling revenues, our revenues rose by $4.5 million, which is 17% growth year-over-year, driven by new programs and volume recovery on PACCAR and Volvo programs. Adjusted gross margin on revenues from customers as a percentage of sales was 22.5%, down 220 basis points versus 24.7% last year. That said, if you exclude tooling margins, product gross margins went from 20.6% last year to 23% this year. While that's a significant improvement, we had expected higher margins, but the US-Iran conflict drove up raw material prices, and we only partially offset that with increased prices to our customers during the quarter because of a lag effect.

Pedro Azevedo executive
#18

Adjusted EBITDA came in at $1.9 million, which is down $565,000 compared with last year. If you set tooling aside, the recent quarter was $1.3 million above last year. Turning to the segments: in Advanced Materials, Plastics and Composite Products, adjusted EBITDA was $2 million, a drop of $650,000 from last year that ties directly to tooling revenues, and in Battery Cells and Materials we had a loss of $140,000, which is an $80,000 improvement over last year. Now for our full year: sales in the first quarter were significantly lower, but the launch of the Club Car business, a recovery in volumes at PACCAR and Volvo, and the beginning of shipments to CPChem under our supply agreement in the second quarter gave us three quarters of continued growth in both sales and EBITDA. Sales for the year were $117.3 million, below last year's $129 million, though that gap stems directly from our first quarter and from more normalized tooling revenues in the current year. Adjusted EBITDA this year of $1.93 million was also lower than last year's $6.1 million, for those same reasons. On the balance sheet and cash flows: we closed the quarter with $25 million in cash and cash equivalents, along with $11.5 million in short-term and long-term debt.

Pedro Azevedo executive
#19

During a recent renewal of our RBC credit facility, we cut the revolving credit line from $10 million down to $5 million and raised the term loan facility by that same amount. We concluded that $5 million was enough for our needs and that we were paying standby fees for no reason. An amendment can reverse this if it becomes necessary later on. So our cash, together with the unused capacity under our revolving credit lines, gave us total liquidity of $30 million as of June 30th. All in all, cash flow in Q4 was positive $650,000, and that marked the first quarter in which we produced positive cash flow apart from quarters containing financings or large tooling repayments. Operating cash flows came in at positive $3.6 million, driven mainly by strong EBITDA and a decrease in working capital. Even with that improvement, working capital is still above normal because of tooling invoices sitting in our receivables and tooling receivables that cannot yet be billed, which hurt our working capital by $8 million. We anticipate collecting those amounts during fiscal year 2027. Financing activities produced positive cash flow of $230,000, coming from equipment financing and partly offset by repayments of debt and leases. Investing activities had negative cash flow of $3.1 million owing to capital expenditures as we continue working to complete the investments in our strategic plan.

Pedro Azevedo executive
#20

And finally, as we noted on the May analyst call, the February US Supreme Court ruling on IEEPA tariffs let us submit a claim for refunds of IEEPA tariffs we had paid on imported equipment. In June 2026, that approval came through for a US refund of $720,000, and we recorded it as an accrued receivable, reducing the carrying cost of the equipment within plant, property, and equipment on the balance sheet. We collected that amount in July 2026. Now shifting to near-term CapEx spending and our commentary on fiscal year 2027 expectations. As noted earlier, most of our large strategic investments are now behind us, and we expect CapEx to drop substantially starting in Q1 2027, running at under $1 million per quarter on a run-rate basis. New initiatives, such as a capacity expansion, could arise during the year, and we will give an update when that happens. As for fiscal year 2027, Q1 revenues should land in the range of $30.5 million to $31 million, an increase of 32% compared with last year. Keep in mind that Q1 is typically the weakest quarter of the year. For the full year, beyond full-year impacts from the Club Car business and continued volume recovery in the solutions business, as Rocco described, we expect commercialization across several graphene sales initiatives to get underway and grow.

Pedro Azevedo executive
#21

Although those will help revenue, the effect on margins will be larger, because the majority of that added business in graphene powders and masterbatches comes with high margins. That said, two new Volvo programs that were slated to begin in the second half of our 2027 have been pushed to our fiscal year 2028 because of regulatory changes in the industry originating from the Trump administration. Despite that postponement, we remain optimistic about fiscal year 2027 and expect revenue growth for the full year of between 11% and 20%, with revenues of between $130 million and $140 million, and we expect to generate positive free cash flow. Achieving that revenue and free cash flow performance would mark record highs for NanoXplore. Then, looking further out, our internal expectations for fiscal year 2028 point to revenues of between $160 million and $170 million, driven by growth in both graphene sales and our solutions business, absent any unforeseen circumstances. Finally, on the trade war between Canada and the United States, as of today, most of the materials we bring into Canada are not subject to Canadian tariffs, and none of the products we sell into the United States are subject to US tariffs. NanoXplore is well positioned to handle this situation, since we have production facilities in both countries, and we can work with customers to mitigate potential future impact.

Liam Turner executive
#22

Thanks, Pedro. Operator, let's go ahead and open the line for questions now.

Operator operator
#23

Thank you. Just a reminder — to ask a question, press star and 1 on your phone. An automated message will confirm that your hand is raised. To drop out of the queue, press star and 1 once more. Please hold while we put the Q&A roster together. We'd also ask that you hold off on your question until your name and company have been announced. Our first question comes from Batshur Tsogtbaatar at National Bank of Canada. Please go ahead.

Baltej Sidhu analyst
#24

Hi there, good afternoon, Rocco and Pedro. I’ve just got a handful of questions from my side. To start, on TriboGraphene: with more operating data now available for the product, are you still seeing steady results from lab work through field trials across various regions and different geology? And does that 20% cut in drilling time still hold as representative of what you initially found?

Rocco Marinaccio executive
#25

Yes. Good afternoon, Batshur. Every piece of technical data for NanoSlide has now been run and validated. The technical data sheets posted on CPChem's website all remain accurate. Each customer that has trialed the product and carried out its own testing has confirmed those results. The decrease in drill time holds up in the various regions around the world where it has been tested, and the value propositions remain unchanged.

Baltej Sidhu analyst
#26

Thanks. Since that first chance with the customer didn't move forward purely because of commercial factors specific to that customer, is there a risk that comparable customer-specific issues could keep pushing back wider commercialization? Or, based on what you know, is that more of a one-off?

Rocco Marinaccio executive
#27

I'd describe it as a learning curve — and I'm not speaking for CPChem here — but I'd call it a one-off. I won't get into what the commercial issues were between them and their customer, but I'll characterize it as a one-off.

Baltej Sidhu analyst
#28

Thanks. Turning to the dry process graphene side — I know you currently have one line in place, and it sounds like there's somewhat better incremental visibility with certain customers. Given what you have today, might you indicate that we could see an additional line added at some point during fiscal 2027?

Rocco Marinaccio executive
#29

That’s difficult to answer at the moment. For the D-Series product, capacity varies based on the grade we produce—anywhere from hundreds of tons to a thousand, correct? A few of the opportunities we mentioned earlier have come back to life, including cement application, which represents a very large opportunity. There are also thin film applications—the percentage figure we cited for that is below 1%, correct? It’s hard to say whether there’s extra capacity available. What I can tell you is that we’re looking at 1,000 tons when it comes to insulation foams. As we move forward, the bottleneck we’re seeing is really with our masterbatch equipment rather than on the graphene side at this point.

Baltej Sidhu analyst
#30

Thanks very much. One final question from me, and it's a change of topic to VoltaXplore. With the increased focus on defense and the fact that you're now going after UAVs, drones and similar areas, when it comes to the customer discussions you're having, is it mostly you proactively approaching customers, or is it more that customers are coming to you? And building on that, is the pace of those engagements greater than what you originally expected at the time of the strategic review?

Rocco Marinaccio executive
#31

Yes to every one of those. On customers — and Nano itself — we haven’t discussed Volta much publicly in recent years. From a Canadian perspective, Volta’s technology is second to none, I’d say. I’m not aware of anyone else able to make 21700 cylindrical cells with the technology we hold. On your customer question, I’d answer both. We’ve engaged customers and had excellent interaction, with people contacting us directly on that front. We’ve talked about federal grants and the like that we’ve applied for, and as things move forward, we’ll share more insight with you and the market.

Baltej Sidhu analyst
#32

Appreciate it, Rocco and Pedro. I'll take it from here.

Rocco Marinaccio executive
#33

Much appreciated, Batshur.

Operator operator
#34

Thanks. Give us a second for the following question. The next one comes from James McGarragle at RBC Capital Markets. Your line is open.

James McGarragle analyst
#35

Hey, thanks for having me on the call.

Rocco Marinaccio executive
#36

James, hello there.

James McGarragle analyst
#37

My question is about the top-line guidance of 130 to 140 for fiscal 2027. If I simply take your Q4 revenue figure and multiply it by four, it kind of suggests you're already landing in the middle of that range. I understand there is seasonality in these numbers, but the low end appears to presume that nothing improves whatsoever and everything stays exactly as it is. Could you walk us through the revenue drivers behind the range and explain what would take you to the high end of it? And if any of those other opportunities you mentioned were to materialize during this next fiscal year, might they point to potential upside beyond the top end of the range?

Pedro Azevedo executive
#38

Hi James, Pedro here. In response to your question, yes, seasonality is a factor, and as I mentioned, we're anticipating roughly 30.5 to 31 for Q1. That already brings us nearer to that 120-something starting point, and from there it climbs. With Club Car continuing, plus the full-year effect of the Club Car business—since last year we had only about three quarters of genuine business—the fourth quarter will contribute to that revenue figure, so that will be additive to what you're seeing. We had expected the Volvo and PACCAR business to begin this year; in fact, we thought it would go beyond 140. Since it has been pushed to fiscal year 2028, we have taken that out of our expectations at this point. The 130 to 140 will really stem from Club Car's continuity. It will stem from growth in those graphene-enhanced products, the masterbatches and powder forms that Rocco brought up. You need to keep in mind that even 500 tons of product will add only $5 million. It won't increase by $10 or $20 million simply from expansion of these products. That impact will be slower, but when it comes to margins, it will be larger.

Pedro Azevedo executive
#39

So the 130 to 140 really comes from Club Car, plus the Volvo and PACCAR expansion, along with the graphene and masterbatches rollout. Then

James McGarragle analyst
#40

This is a similar question about the step-up going into fiscal 2028 — I'm just trying to get a sense of how much confidence you have in being able to achieve that. Is it mainly Volvo ramping up? And then would all the other opportunities represent potential upside? I'm just trying to see the walk between the fiscal 2027 and fiscal 2028 guide.

Pedro Azevedo executive
#41

James, your interpretation is spot on. The reason we're publishing those figures for 2028 is essentially that we know these Volvo programs are coming to market. Absent any problems with PACCAR or the trucking sector that could force us to lower them once again, our business is steady. At this point, we know this business is getting underway. We know it adds to what we already have, along with the growth we'll see from graphene and masterbatches across those five initiatives Rocco mentioned. Frankly, we believe that 160 to 170 — I wouldn't call it safe, since you can never call anything safe — is, in our view, a solid starting point, and we might even surpass it within two years.

James McGarragle analyst
#42

Thanks for that. Then I’ve got just one more on the margin front. Clearly, it looks like there’s room for margins to get better as some of those opportunities with higher margins potentially begin to scale up. As for what you can see right now for fiscal 2027, could you give us some detail on how you expect Q1 margins to develop and any targets you’re able to share for the whole of fiscal 2027?

Pedro Azevedo executive
#43

Sure. In Q1, although graphene delivers solid margins, it's revenue that covers our overheads and fixed overhead. For Q1, we'll likely come in somewhat softer than Q4 — roughly 50 basis points, driven by the revenue decline, so to speak. Then, as the year moves along and revenues strengthen, we're expecting 150 basis points of improvement starting from Q1, potentially reaching 200 basis points by year-end, in Q4. That translates to roughly 200 basis points of gain across the year, ending Q4 at around that level. As for the average, it will likely work out to somewhere in the 100-and-something range, 150, for the full-year impact year-over-year, but by the close of Q4, we anticipate being about 200 basis points stronger than we were in this Q4.

James McGarragle analyst
#44

Much appreciated. Thanks for the added detail.

Pedro Azevedo executive
#45

Happy to have you with us.

Operator operator
#46

Thanks. Please hold for a second while we get the next question. The next one is from Marvin Wolff at Paradigm Capital. Go ahead.

Marvin Wolff analyst
#47

Afternoon, everyone, and nice work on a solid quarter—this call has been a really strong one.

Rocco Marinaccio executive
#48

I appreciate that, Marvin.

Marvin Wolff analyst
#49

I'm doing well. I had a question about the cement side, and it's really more of a science and technical question. Could you give us some more detail on how your D-Series graphene behaves differently in the cement application compared with the X-Series?

Rocco Marinaccio executive
#50

Regarding the X-Series graphene I mentioned, we have long sheets, correct? The D-Series product is consistent, right? Six years ago, when we did work in cement, we could achieve very consistent lab results. The issue was translating that into commercial traction, right? D-Series will help us with dispersion and a very consistent product in the field.

Marvin Wolff analyst
#51

So a few of your rivals discovered that once they put their graphene — which is comparable to the X-Series as well — into different cement blends, it did better while curing, but after it had set, let's say at six weeks or eight weeks or so, when fully cured, there wasn't really much benefit left from the graphene. What you're telling us is that you're seeing the D-Series deliver that improved performance once curing is done — greater flexibility, that kind of thing?

Rocco Marinaccio executive
#52

Honestly, Marvin, I’m not sure which customer or competitor figures you mean. With X-Series, when all work was done in the lab, our data was consistent—or quite strong. Getting compression strength readings at 1 day, 7 days, and 28 days wasn’t the issue. What caused trouble was maintaining consistency once we moved into the field under commercial conditions. That’s the difficulty we ran into—and in all likelihood, so did everyone else, in the sense that this isn’t commercial today. Another key element when it comes to commercializing cement or turning it into concrete is expense. From commercial-scale graphene, we are the lowest-cost producer by a wide margin, and that represents a huge advantage for Nano compared with anybody else.

Marvin Wolff analyst
#53

It's encouraging that the D-Series managed to break into that segment, since that segment is enormous.

Rocco Marinaccio executive
#54

That is something we agree on,

Pedro Azevedo executive
#55

Yeah.

Marvin Wolff analyst
#56

Much appreciated.

Rocco Marinaccio executive
#57

I appreciate that, Marvin.

Pedro Azevedo executive
#58

I appreciate that, Marvin.

Operator operator
#59

Thanks. Give us a second while we line up the following question. Michael Glen from Raymond James will be asking the next one. Go right ahead.

Michael Glen analyst
#60

Hey, just to begin, Pedro, as you think about the revenue guidance for the upcoming fiscal year, fiscal 2028, just so we're clear, to reach that revenue, would you need any extra graphene capacity or graphene production capacity?

Pedro Azevedo executive
#61

Yes, you've got it exactly right. With the capacity we currently have, we see it covering the near-term needs that are visible, and that ought to generate those sorts of revenue figures. Should growth come in stronger than what we foresee today, more capital would be needed, and that would clearly be upside to the 160, 170. We've discussed this too: the 4,000-ton capacity on the X-Series — we still have room right now for sufficient growth, and we're not overly worried about that at present. The D-Series costs less. It's the one more likely to hit its capacity limit sooner, and that calls for roughly $2 million in investment. One point we've sort of made is that as the D-Series product line's capacity fills up, the profit being generated from that activity is enough to almost pay for a new line by itself. That capacity could be expanded, and it would be upside to the 160, 170.

Michael Glen analyst
#62

All right. Could you tell me whether the capacity you currently have across both of those lines would be enough to support, say, $200 million in revenue? Can you put it in those terms?

Pedro Azevedo executive
#63

I can't give you a single figure, since it depends heavily on the mix. As Rocco explained, looking just at the D-Series, when you're making product of very high quality and very high level, our capacity falls from 1,000 tons down to 200 or whatever—capacity shifts quite a lot. It isn't about how many dollars we're able to produce with what we have today, or how many dollars we could produce later on with one more line or two more lines. It truly hinges on where we're seeing that growth come from. Whether it's $10/kg or $20/kg or $90/kg, it really depends on where that revenue is coming from.

Michael Glen analyst
#64

All right. To go back to a few of those end markets you mentioned — insulating foams and industrial consumer films, for instance — is any of those customers thinking about or considering having the final product officially marketed as a consumer-facing product enhanced with graphene?

Rocco Marinaccio executive
#65

Michael, could you rephrase that question?

Michael Glen analyst
#66

Would Glad be marketed as graphene-enhanced, for instance?

Rocco Marinaccio executive
#67

Oh, would they actually market it?

Michael Glen analyst
#68

Alright.

Rocco Marinaccio executive
#69

Regarding insulating foam, we're engaged with multiple customers, correct? Each sits at a different point in development. A few are quite near commercialization. How their marketing efforts look is something I can't address. As far as we know, they aren't promoting it as a graphene enhancer. Their plan is to employ it for process improvement, correct? What graphene does is raise the R-value insulation rating in foams across North America and Europe, substituting for a halogenated substance that has been banned, correct?

Michael Glen analyst
#70

All right, I'm just trying to get a handle on this — is there some kind of edge, or a gain in market share, that could come from marketing a product as graphene enhanced?

Rocco Marinaccio executive
#71

So when you bring in a new technology, the assumption is that it will drive your costs up, correct? But the truth is this: unless we deliver some benefit to a product or to a customer, we won't sell a thing, right? We've pinpointed the places where graphene delivers the greatest benefit — in insulating foam and in thin films, and by thin films I mean garbage bags — and that value proposition has to become something concrete: a huge performance gain, a cost cut for a customer or for the consumer, right? Those are the areas we've concentrated on, where graphene is delivering enormous value to the end product.

Michael Glen analyst
#72

All right. Regarding the conductive graphene space application, could you give us some concrete instances of what those products actually are?

Rocco Marinaccio executive
#73

Energy storage. That single customer we mentioned in Asia is buying battery cells for energy storage. We're selling to them — it's a commercial buyer purchasing from us — and beyond that, we're engaged with quite a few others, correct? Take VoltaXplore, for instance: they could incorporate conductive graphene supplied by us — not necessarily in every cell, but it's an option for them. That example is the simplest one to grasp.

Michael Glen analyst
#74

Alright, I appreciate you taking the time for questions.

Rocco Marinaccio executive
#75

Appreciate it, Michael.

Operator operator
#76

Thank you. That brings today’s Q&A portion to a close, and it also wraps up today’s programming. Thanks to everyone for joining, and you’re welcome to disconnect now.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete NanoXplore Inc. transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to NanoXplore Inc. earnings transcripts and 132,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.