Norsk Titanium AS (NTI) Earnings Call Transcript
November 6, 2025
Earnings Call Speaker Segments
Hello, and thank you for joining this operational update for the third quarter. I realize everyone is keen to hear from the new leader of our company, Fabrizio Ponte. However, given that Fabrizio came on board a mere four weeks back, on October 6, we felt it made sense for me to offer a few introductory remarks about how we performed during the third quarter before handing things over to him. Our CFO, Ashar Ashary, is also with us online. Sadly, a back injury has kept Ashar from traveling, though he will still be able to take part in the Q&A session. Let me briefly remind everyone where we stand within additive manufacturing. Norsk Titanium holds proprietary technology that the OEMs have validated, backed by substantial installed capacity. That is where we begin. Our value proposition is considerable, and we truly have manufacturing capacity in place, ready to serve customers. The market we play in is, in our view, a large one. Today, we put the addressable market at $7 billion. You could say that already gives us quite a lot to work with, yet it is clear this market will keep expanding as time goes on, for two reasons. To begin with, we are seeing build rates rise across our core markets — aerospace defense above all.
Conversely, we keep building out what we're able to do, so that a rising share of the market can be served as we go on extending those capabilities — in terms of part size as well as into additional metals. And lastly, we have a customer base that's well established. Framework agreements are in place with the top OEMs, and what we're really focused on now is making certain we can grow the business within those framework agreements — both the ones already existing and those still to come. That's genuinely where we start from. Qualified technology, certified technology, installed capacity. It all comes down to commercial execution, and later in the presentation you'll hear more on that. What took place in the third quarter? Above all, we moved 2 more industrial parts into serial production. I'll say openly that this fell short of what we expected and short of what we'd hoped for. That doesn't mean the opportunities have gone away, but as you've seen previously, turning those opportunities into serial production does take time. What else happened? To begin with, we kept moving forward in our discussions with Airbus. Those discussions concern, in the short term, the third production order that we know many of you are tracking closely and awaiting.
Talks with a broad set of stakeholders at Airbus keep moving forward, and Fabrizio is going to go into that in a bit more depth afterward. Beyond that, we collaborate with Airbus on a longer-term roadmap as well, and when Fabrizio addresses it later, I'd ask you to note how the way Airbus and we work together lines up with the roadmap Airbus has made public regarding their plans for growing additive manufacturing utilization. Momentum in defense is strong, which I think comes as no surprise to anyone tracking that sector right now. Defense spending by governments is going up, and for obvious reasons time matters greatly. We remain in ongoing talks with ICAM — the Innovation, Capability, and Modernization Office within the Department of Defense. Our technology has been designated by them as a key enabler for driving greater capacity for defense products across a number of domains in the U.S. Our hope is that this lifts our revenues in the short term, since these are paid development activities, and once this development timeline of 18 months concludes, serial production will increase. That's a good illustration of what defense provides, correct? Both funded development activities and meaningful parts manufacturing opportunities come out of it.
We keep growing in industrial markets. Fabrizio will also say a bit more on that later, but naturally, the two segments I referenced are aimed at those particular markets. We raised $22 million in order to bolster our balance sheet and reinforce our financial position, first through a private placement and then, shortly after, through a repair issue. Along the same lines, we have also, after making initial investments during the first half. To ensure we possess the capabilities required to persuade our customers, we have additionally adopted a more cautious stance toward our cash burn in the third quarter, and you should expect those efforts to carry on as well so that our costs stay aligned with our revenue. Development. As I said at the outset, our biggest challenge and our top priority is turning our technology position and our industrial position into commercial opportunities. That provides a perfect segue into my introduction of Fabrizio Ponte. Why did we believe he had the right profile to take this company forward? It comes down to commercial execution. It comes down to operational readiness. It comes down to financial discipline. You will now hear from Fabrizio, in his own words, how he believes his background.
That leaves him really well set up to handle this challenge as we move forward. With that said, Fabrizio, over to you.
Thank you, John. All right. Perhaps I should take over here. Is my voice coming through clearly? That sounds fine. Hello. Right then. Good morning, everyone. My name is Fabrizio Ponte. I've just become CEO of Norsk Titanium, and I can honestly say I'm thrilled to be in Oslo and to have come on board at Norsk Titanium. A bit about where I come from. For the past 30 years, my work involved swapping out metal for quite distinctive polymers. Right? So now I've crossed over to the dark side, signing up with a truly unique company and truly unique processes, producing truly unique metal components, taking the place of forgers. Right? I'm familiar with how this works. I understand what's needed to move from point A to point B and to carry it past the tipping point. What makes me enthusiastic about Norsk Titanium? Well, above all, it's the technology. I mean, it changes the game. From the outside, prior to joining, I did a great deal of research. I recognized what this technology could achieve. The moment I arrived, I began hearing about the demand pulling us from the market: aerospace structures, defense, and plenty of other sectors. That gives me a great, great deal of confidence in what lies ahead for Norsk Titanium. So what do I contribute?
Like I mentioned, my focus has been on replacing metal, so I understand how to establish an operation, grow it, and engage with markets—several markets—to drive technological change. That is extremely exciting for me. I believe that's what I offer Norsk, and I believe that with all the expertise we possess plus the commercial know-how I bring, we will be extremely successful over the years ahead. As the leader of Norsk Titanium, I'd like to share a bit about what I believe. To start, for me, quality and safety are cultural traits that cannot be compromised. It matters greatly that, particularly in aerospace and in defense, quality cannot be compromised. Right? You must ensure that everything you do satisfies your customers' standards. This will, I think it's simple, but it will stay a very important characteristic of Norsk Titanium. The second thing that's always on my mind is customers. I have what I call a customer obsession. I truly believe in working, and everything must be done keeping the customer in mind. We exist because we have customers, so serving them and collaborating with them, earning their trust and building partnership matters greatly, especially in markets such as this where development takes time.
You have to combine hard work with partnership, since that's how we'll get across the finish line together. Accountability matters to me. Team play matters to me, but accountability matters to me just as much. We'll establish clear targets, and we'll push very hard to hit them. I genuinely think the right expertise is here. My first month on the job showed me that, and it gives me a great deal of confidence as well. All right. That's a bit about me, a bit about why I'm joining Norsk Titanium, and what I stand for. Naturally, I switch everything off. Okay? What's going to happen? What has happened during the first 30 days? What will happen over the next 60 days? We have a plan covering my first three months. There's no doubt about that. There is a great deal I need to learn. As I mentioned, I come from a very similar background. Specialty products, replacing technologies, making advances in the market, and scaling operation. At the same time, titanium and special alloys differ from polymers. Of course, I need to learn. I'm really trying to be a sponge.
Over the first 30 days, I’ve been putting in a lot of effort internally. I’ll keep doing that over the months ahead. What I mean is, I’m sure I’ll learn from my colleagues and my team at Norsk, and I’ll learn from customers as well. I can tell you that as soon as I’m done here in Norway, next week, my tour with customers will begin, with a number of very important discussions already lined up. That will help me understand where we are, what we do, and what our customers think of Norsk Titanium and what lies in the future. So, what’s the plan here? The plan is laid out across three different dimensions. Number one is commercial execution. I’m lucky enough to have joined Norsk Titanium with a rich pipeline of work. It’s not that I’m starting from scratch. Norsk has been around for quite some time and advanced the technology and the customer relationship quite a bit. I take advantage of all that. I’m really trying to understand and digest. What really our status is and what it’s going to take in order to really go across the finish line from the commercial standpoint. To me, that’s my priority number one in the first three months.
At the same time, I'm collaborating closely with operations. We need to be set for the moment when big volumes have to be served. Scaling alongside our operation is invariably a significant challenge. You can never predict what will occur—I mean, but preparation is essential. You have to reach a particular level, and afterward, once the moment arrives, you must understand the plan and the actions to take. I'm working alongside my operations team to identify strengths and weaknesses and to move toward ensuring readiness at the point we must be ready—something that will arrive very, very soon. Finally, there's financial discipline. Okay? The funds we have are finite, and we recognize we must operate with that reality in view. It matters that everyone across the company knows this and applies proper discipline from both a financial and a cash perspective. This is essential, and I'm confident we're headed the right way here. All right. Let's dive into the business, and I'll do my utmost to give you an update. Please. I realize this excuse can be used by me just once, so I'm using it today.
It's been 30 days since I joined the company. Actually, it's the 6th. I mean, as of today it's one month. Okay? Today's my birthday—one month with the company. I'll give it my best. To give you an update on quarter three and a bit of an outlook going forward. I'd say a fair amount has happened. Naturally, we're still delivering parts to Boeing and Airbus. It isn't huge, as the numbers showed you, but even so, the parts we make are flying right now on various airplanes. That's a really good place to start from. What I believe made a difference this quarter is really the continuing conversation we've had with Airbus. This is really—I'd like to—this is really—I'd like to see it as a partnership between Norsk Titanium and Airbus. Airbus is concentrated on bringing additive manufacturing into their processes. They view additive manufacturing as a crucial enabler for the next-generation airplane. They understand that to reach that point, they must convert parts today so they're ready. That's where Norsk Titanium comes in. At Airbus, Norsk Titanium is among the leading players in this technology.
Here's the roadmap Airbus has put together, and you can already spot several of our parts sitting on it. That's really reassuring. Our standing with Airbus is clear for all to see — no need for me to spell it out. I'd say we've been quite active, with plenty of intense discussion along the way. As you know, commercial aerospace is a heavily regulated market. You have to work through the steps, and the OEM controls those steps. Our role is to back them up, assist them, and at times give them a nudge so they stay on target. These conversations happen every single day. Right? One of my first stops next week will be precisely with these people. To me, Airbus represents a highly strategic and relevant customer and opportunity — one that will genuinely unlock our potential. What's even more striking, as I mentioned, is that Airbus is exploring additive manufacturing as a pivotal technology going forward. There's a great deal of discussion about how Norsk Titanium can help Airbus achieve that. This truly extends past the third production order John mentioned. Naturally, that third production order is the step that will carry us over there.
What really gets me enthusiastic about what lies ahead is that they’re keen to collaborate with us on setting the standards for additive manufacturing. As a CEO, and for Norsk Titanium overall, that’s both hugely reassuring and genuinely thrilling. And finally, it helps you grasp how we operate within this industry and what has to happen for us to truly get across the finish line. This was, I believe, a few months back. We put together a highly strategic and significant meeting involving every regulator—North American and European—along with Airbus. Everyone was seated together at one table, and we talked through how to resolve all of it and how to move toward producing parts with our technology and in additive manufacturing. It strikes me as quite unique that a company can get the essential decision-makers together in one room and lay out plans, with key milestones, to advance. That is genuinely remarkable. I’m extremely enthusiastic. On commercial aircraft—I’d say I’m excited about structures. I’m excited about the additional applications we’re pursuing, such as engines and other components in aerospace.
That's really, really strong. All right? Next, defense. Defense is transforming. It's a brand-new industry. I mean, historically it was as conservative and heavily regulated as aerospace. Today, things look somewhat different, driven by geopolitical factors. The industry is striving to gain speed. It recognizes the need to alter how it produces parts and creates technologies that make those parts quicker, tougher, and at far greater scale. We serve as an enabler for that. Right? As John said, ICAM has chosen us — that's the Innovation Capability and Modernization Program inside DOD — for an 18-month effort to validate our technology. They will work to qualify and validate us. Once the technology is qualified, going on to produce parts becomes far simpler. Okay? We will work extremely hard to succeed across these 18 months. At the conclusion of the program, by the way, we'll be working alongside a number of primes. We aren't there alone. We will move forward and begin enabling part manufacturing across a number of, let's say, sectors in defense: air, land, sea.
All of those are targets we intend to pursue. I believe this will bring us a fair number of positive surprises. Third is the entire industrial side. We have a solid starting point there. We're already involved in semiconductor. In a previous life, I worked in semiconductor myself. This is a significant piece. It's a wafer carrier. It goes to one of the — if not the — most important OEMs in the semiconductor industry. That has me very excited. They went through a slowdown. Now business is picking up once more. I'll be meeting with these people next week as well. Semiconductor, I think, will also be an opportunity. It's the first industrial application, let's say, where we are in production. It gives me comfort that our technology has a role beyond pure aerospace. As you read in the summary, we also converted another two parts into other industrial applications. All of this tells me we're on the right track. Before my time — so I'll enjoy that as well — we began setting up a commercial team. We have dedicated, focused sales and business development managers working in industrial.
We've charted the whole industry landscape. We know where the priorities sit. We're having several focused conversations with key OEMs across a range of industries: energy, again, semiconductor, oil and gas, plus a few others. That's going to deliver a fair amount of diversification. As I mentioned, for quite a while we've been entirely in aerospace, which is heavily regulated and has a long development cycle. Every one of these markets is less regulated than that. Their cycles will be faster, and I believe they'll create opportunities in a shorter period of time and offset the delays that we often have to endure in the aerospace industry. To wrap up, okay? I'm the new CEO at Norsk Titanium. I'm very excited to be here. I like to think I'm truly the right person for this very moment at Norsk Titanium. I arrived exactly at the time when we need to cross over, we need to push it a little bit, get across the tipping point, and then really begin to scale it. I know how to do that. I'm very excited about this. I think I spent my last 30 years working to reach this opportunity.
Honestly, I believe my experience is a big reason I'm standing here, and I'm genuinely fired up to tackle this challenge and lift Norsk Titanium to a higher level. To me, this is the chance of a lifetime. Our attention is tightly centered on three separate work streams, all right? Commercial, operation, and financial. On commercial, I always tell people it comes first. We have to guarantee that we lock in profitable revenues. Over the coming months and years, we must collaborate with our customers so we can secure those revenues and make the leap that Norsk Titanium needs to take. That is priority number one. Everything else comes after it, all right? On operation, being prepared efficiently matters, but so does the ability to scale it. With additive manufacturing, things work a bit differently than in other industries. Scaling happens in a different manner than, say, how you scale in the polymer industry, all right? You have to make certain you do that in advance. You can't get caught off guard once you're there. Financial discipline is extremely important throughout the whole industry. Lastly, clearly, modest revenue in the near term. I mean, you witnessed that this year. We definitely can't declare a victory. That said, we took solid steps toward success.
That leaves me feeling very optimistic. I mean, when folks ask, "What is it that you see?" my answer is that I have strong confidence in what lies ahead and in the outlook. There's zero doubt in my mind on that point. I've always put it this way: the question isn't whether it happens, it's when it happens. Making that "when" arrive as quickly as it can is my responsibility, and I'll put in hard work and plenty of energy to ensure it does. Thanks for being here today. My hope is that this was genuinely useful. I hope you feel you know me a bit better now. You've begun to get a somewhat better sense of who I am. In the quarters ahead, I believe that will keep building, and we'll come to know one another and collaborate going forward, and make Norsk Titanium very successful. Thanks to all of you. Thank you, Fabrizio and John. I believe it's time to shift to the Q&A portion. We'll begin with the audience here in Oslo. If you have a question, please raise your hand. Kindly give your name before posing your question.
Thanks, Preben Raskoltsen. I actually have three questions, and I hope that's alright. A few of them should be fairly easy. First, regarding the outlook, there's no mention of any revenue targets for next year or three years out. Are you finally finished with that foolish guidance?
Sure, I’ll take that one. Go ahead, John.
Alright.
You’re calling that guidance stupid, so I take your constructive feedback on board. It’s been four weeks since I got here, all right? I’m trying to get a clear picture of exactly what we have in place, what our customers are telling us and what they expect from us. It’s very hard for me to give you firm feedback on this. I mean, I’ll work another couple of months, so at the next review, which is going to happen early next year. I mean, we’re going to talk about that, but yeah, I mean, maybe we will stop the stupid guidance. Preben? I think that’s Mark. Okay. What you could guide on and would be interesting to hear is a realistic cash burn in the first half of 2026. Yeah. What’s sort of the level you can reach and should reach? Yeah. So also here, I mean, we are, okay, we are already reducing this. I mean, we were successful at going from $2.9 million to $2.4 million. Now we want to go at $2 million. But certainly before the end of the year, I want to be in the position to set a target that we can absolutely achieve, which is not going to go up, but it’s going to go down.
I honestly can't say at this moment what's achievable, but here's what I can say: I'm committed to setting a very clear target that we'll work toward and deliver on, averaged across next year. As I mentioned here, this is without question one of our goals. We recognize that our cash burn rate has to come down, and we will make that happen, okay, by whatever means necessary. Thank you. The final one really concerns aerospace.
I was under the impression that you had wrapped up every regulatory approval, but what you're saying is that you're now sitting down with Airbus and the regulators.
All right, sure. I'll give it a shot as well. And Preben, feel free to call me out if I say anything foolish, all right? To start with. As you're aware, a government shutdown is happening in the U.S. That's having a minor effect on us. At this moment, in fact, all activity is halted and at a standstill until the government reopens. What I mean is, they aren't able to move forward. Getting the FAA and ESA into alignment isn't simple work, and that alignment has to happen before we can be cleared to proceed. All the work itself is finished. The paperwork still has to be completed, and that hasn't happened for several reasons. So we chose to grab the bull by the horns. We got everyone together at the table to do precisely that. It also signals that, hey, we aren't just sitting around waiting and hoping it will happen. We're actively doing everything we can to push and make progress, and that, believe me, is not easy work.
To build on what Fabrizio mentioned, since this is a legacy matter as well, right? You're completely right, Preben. The core approvals and the core certification are clearly in place. If you consider Airbus' roadmap and their intentions moving forward, we can't keep operating the same way. We can't keep approving additive manufacturing parts that carry a forging legacy, and the regulators are on board, and Airbus is on board. The real question was how do we streamline processes going forward? How do we make sure information flows? How do we adopt an approach grounded in the fundamentals of additive manufacturing, right? Not to reopen the certification process, but to make things more efficient going forward. If you look at the roadmap Airbus has been quite outspoken about, it calls for change on the regulator side too. It's a little unusual, right, that both regulators sit down, as Fabrizio said, with a company like ours to actually have that conversation. I mean, it's as if the regulators would genuinely accept that we really are the center of gravity in the additive manufacturing space. We have been through this cycle. No other additive manufacturing companies have been through this cycle.
We had them all in one room together, which is pretty rare for them. We can discuss ways to make this efficient moving forward, since otherwise there's a danger we'll hit stumbling blocks when we try to help Airbus implement their roadmap. That's the way to think about it. Yep.
Are there any further questions from those in the room? All right, let's turn to the web. Given the revenue delay, which operational adjustments have been implemented so that execution improves as revenue scales?
Perhaps I should begin, since this is somewhat of a legacy matter. It connects to the burn rate discussion we had earlier, correct? We did make certain investments, which we also outline in our third quarter update. We did make certain investments so we'd be ready in the first half, and that's why the burn rate is slightly higher. At this point we're in a position to handle that more carefully. It relates to a number of things — it relates to capacity, it relates to inventory, it relates to securing downstream capacity, and not only capacity in-house. It relates to how we approach testing. I mean, it's a broad range of operational issues that we can fine-tune and therefore, on one hand, still be a credible supplier, because that's important, right? We don't want to do anything which would give our customers the possibility to escape, if you like. On the other hand, we also need to be mindful and disciplined in how we allocate capital.
Conversely, I mean, we've also invested a great deal of effort in building a commercial team that is now focused on generating revenue. Head out, chase it down, and bring it back. I believe that's genuinely a major shift as well. We'll keep moving along that path, getting stronger and stronger at going out and securing opportunities we're able to serve. Alright? That represents quite a significant change. Good. To follow up on the cash burn question, does your present cash balance mean you're self-funded?
I don't believe the messaging is going to change, since this ties back to what we covered in the first half report. At this point in time, I think we have no other message. You've heard Fabrizio and his plans for the next 60 days. I'm sure we'll look for ways to speed things up. We'll look for ways to be more disciplined. Not go back to any specific guidance that differs from what we've already given the market at this point in time. Good. Thank you. How is the diversification progressing? What are your strategic priorities going forward?
I'd say things are moving along nicely. What we did was spend a month working alongside a consulting firm, building a detailed map of where the opportunities sit — lining up our technology against the various industries. That effort let us pinpoint three, four key industries. At this point our focus is on those industries. For each and every one of them, we have a go-to-market strategy in place. Every single industry has one person who is accountable. Already we're engaged with customers on projects and on parts. They share their ideas and their blueprints, and we respond with the pricing. My sense is that it's progressing well. With the execution we've got, I'm very, very happy. We'll now carry this forward and step it up over the coming months.
Let me build on what was just said, since we've discussed this in historical terms as well. When it comes to aerospace and aero structures, the value we offer is fairly evident. The customers, as Fabrizio mentioned, are complicated to navigate, I mean, but what we bring to the table is fairly evident. The properties of the parts are what our customers value. Things are a bit different in the industrial segment. You have to be more selective when it comes to identifying parts, correct? Since what we offer as value could differ somewhat from one industry to another and from one customer to another. Naturally, with the HITECH part, it isn't as though HITECH and the end customer necessarily require aerospace quality for material strength, right? What really matters is our capacity to cut material consumption — that's the core value we provide on those specific products, right? You need to be somewhat more mindful about how you approach customers, and that's why the more deliberate approach Fabrizio just outlined. Yeah.
On the upside, in aerospace the tailwinds are quite evident. Build rates have to go up. To hit those higher rates, production processes must be reworked. That part is unambiguous. I can also say we're seeing favorable conditions across every one of those markets. If you can show up with technology that's quicker and more efficient — in terms of both raw materials and power usage — and you can engage customers nimbly and fast, your value proposition is very strong. We're seeing that in a number of industries. I'm confident we can pinpoint, pretty fast, the areas where we'll succeed, since these sectors aren't as heavily regulated as aerospace, as I mentioned. On the technical side, the development cycle ought to be considerably shorter. It's still technical, because — as I like to put it — we aren't in the potatoes and tomatoes business. What we sell are highly technical parts that matter and are frequently structural. You have to go through the steps, which is standard for specialty products. Those steps run much quicker than in aerospace, where there are agencies you must persuade, OEMs you must get aligned, and so on.
Alright, so you kicked off the year with $12 million in annual recurring revenue. So far this year, your revenue stands at $2.6 million. If HITECH accounts for only a modest share of that annual recurring revenue, what's behind this gap? And it might help to remind everyone how you define annual recurring revenue.
Perhaps this is something Ashar might want to answer, if he's still with us—Ashar, would you like to take this one?
Okay, thanks. So, the annual — let me begin by explaining what annual recurring revenue means. As this report shows for Q3, we're no longer providing guidance on an annual recurring figure. HITECH actually makes up a meaningful share of that $12.8 million we reported — it isn't a small piece. It's a fairly significant chunk of that figure, for two reasons. First, volumes during 2024 ran quite high, and as most of you are aware, it's a fairly large part. Second, the dollar value attached to that large part was significant. So within the $12.8 million, it represented a significant — it's a significant amount — it was a significant amount of revenue. In 2025, as we explained in the first half report, that purchase order shrank because of the demand HITECH was seeing. We do plan to restore it, and we hold a purchase order for later in Q4 to ship parts to HITECH. Even so, it won't reach the level we were shipping at during 2024.
So I think it's reasonable to say we'll keep going. We'll keep thinking about what the question is really getting at, correct? Clearly, we're going to keep going. We'll also take into account what Preben advised previously. What's the optimal approach for moving forward, and is ARR really a concept that matters for the industrial segment? I'd still make the case pretty firmly that it's likely a concept that matters for the commercial aerospace segment. As Fabrizio mentioned earlier, the industrial segment tends to be more transactional. I believe we have to take that into account so we can give the market the best guidance we possibly can. We've gotten a fair number of questions about Boeing and where your current relationship stands, along with the outlook, I suppose.
Let me begin. We're supplying components to Boeing. We're engaged in several development efforts, assisting them in gaining and refining their additive manufacturing expertise. Our conversations with Boeing are going to expand. I've collaborated with them over a long stretch in a different technology, so I'm bringing that experience into this. I'm confident there's an opportunity to move past the parts we currently provide and, with all the development work we have underway, to have visibility into part production. Right? There's no question about it. Airbus leads for us at present. Boeing is in the picture, and I believe we can build a presence there much like the one we've established at Airbus. Some questions have come in about Q4 and possibly order intake. Could you share how sales will shape up in Q4 and perhaps address budget flush among your defense customers? Yeah.
Q4, I believe, will follow a similar path to Q3. We're putting in very diligent and very active effort to close things out and ensure we're ready for 2026. On defense, as you're aware, we supply components into that sector as well, to a number of primes. As for how that's developing — there's nothing further to report here — but the one I mentioned earlier is a real game changer, not just because they will run and validate our technology, but from a revenue perspective too, as Yan noted. For next year, it's a significant figure for us. That multi-million dollar contract is set to open up opportunities for parts. We're extremely excited about it.
I want to make sure we're clear—this is a development contract worth multiple millions of dollars, correct? Yes. It sets the foundation for manufacturing parts. Yes. We don't have exact visibility into how large that platform will ultimately become, but I believe it demonstrates the commitment of the Department of Defense when they put a few million dollars into developing this. That leaves us hopeful, as Fabrizio mentioned earlier, regarding the potential there. That won't shift the needle on the production side in the fourth quarter, correct? Just to confirm we're aligned. On the revenue side, it's relevant. We have a question from Rian. Could you speak to the Airbus timeline? What are your expectations for the various steps from here through to serial production and revenue recognition?
Again, giving you specific points of contact is hard for me. My customer journey begins at the end of the week. I wish this question had come a month from now. What I can say is that we have very clear milestones that we know must be reached, and we know the way to reach them. Now it is a matter of working with Airbus to sort everything out and hit every single milestone over the coming weeks and months. Okay? That is what is happening, and that is where we are currently active.
Yes, let me add something there. At present we're shipping Airbus components that have entered serial production. There are 12 part numbers now in serial production with Airbus that we deliver on a steady basis and are booking revenue against. Thank you. What sales benefits does the September MMPDS offer?
To start, this has been a long time coming, right? As you've seen across the various updates, we've been through qualification cycles with a number of OEMs, correct? Typically, those OEMs each have their own spec, their own framework, and their own process for getting to a qualified process or a qualified technology. With this particular standard — to put it simply, right? Because MMPDS is a mouthful — but with this particular standard, companies that lack their own specification and lack their own design process for approval can basically rely on the properties documented in this standard by our technology. We're the first additive manufacturing technology to be entering this standard. For a number of engineering environments looking to bring new technologies into their various industries, this is the go-to book. I'd say this is probably especially important in industrials and, to some extent, in defense as well. It really,
Aerospace matters a great deal too, and this is something I'm genuinely thrilled about personally. The MMPDS, after all, is the reference handbook for metal components. Per Yan's remarks, I believe the official rollout lands in December. Come December, we'll be formally listed. We're certain it will happen, though the formal confirmation arrives in December. You'll be hearing plenty on that front, since I believe we must generate significant visibility and ensure the industry grasps just how significant this is. As Yan put it, picture yourself as an engineer: you'll now turn to the handbook — the MMPDS — and find this technology included there, validated. At that point you're able to produce parts. Mechanical properties appear in it. Safety standards appear in it. From where I sit, that's genuinely a game changer. I think we have to ensure we capitalize on it to broaden our reach and get engineers writing specifications grounded in the standard we'll soon have inside this handbook. Can we capitalize on this ahead of the December release? Today is November 6th, so I figure we've got another 25 days for that.
Here's what I can share with you: ahead of the launch, we're going to put real effort into a communication campaign so that this gets plenty of visibility. Down the road, it will serve to ensure everyone grasps that we're included in the handbook and that it can be used for making parts. For our business development folks, it's a game changer as well, okay, so they're able to go out there with it. Now the last question from the web. Given that the industrial market is expected to make up nearly 50% of your 2026 revenue target, as I understand it, what split do you anticipate across the various industrial segments, such as oil and gas, semiconductor, and so forth? Yeah. I believe semiconductor is going to be a significant contributor. In the coming year. That's business we already have, and we're working on growing it. There are two new parts we've got, and they sit within energy infrastructure. The semiconductor piece, I'd say, will be the dominant one. Okay. Are there any final questions from the audience? No. That, I believe, wraps up today's presentation. I'd like you to give thanks to Fabrizio and John, and naturally, to everyone joining us online and everyone here in person too.
Thanks. Many thanks. Same to you. Appreciate it.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Norsk Titanium AS transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Norsk Titanium AS earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.