Home / Transcripts / Norsk Titanium AS (NTI) · November 5, 2026

Norsk Titanium AS (NTI) Earnings Call Transcript

November 5, 2026

Oslo Bors NO Industrials Aerospace and Defense earnings 24 min

Earnings Call Speaker Segments

Analyst analyst
#1

All right, let's begin. Good day, everybody, and thanks for being here for Norsk Titanium's Q3 2026 Operational Update. We appreciate your attendance. On today's call, CEO Fabrizio Ponte and CFO Ashar A. Ashary will walk us through the update, and a Q&A session will follow. <<operator_script>> With that, Fabrizio, the floor is yours.

Fabrizio Ponte executive
#2

Thank you, Joachim. Well then, first off, good afternoon — or good morning — everyone. I'm Fabrizio Ponte, the CEO of Norsk Titanium. It's a real pleasure to be here today to report on our third quarter, and I also want to give you an outlook for the year. There's a fair amount for us to present, and we need to fit it into a 15 minutes so that the remaining 15 can be used for Q&A, so let's begin. Ashar, if you could go to the next slide. All right. So what you're seeing here is really — our Q3 and how we see the year ahead. I'm glad to say that across every key metric, the trend is positive. So right now we're in a position where sales for the year can more than double. And at the close of the quarter we are going to reach $5 million year-to-date. We achieved that. As for cash burn down, we also managed to keep it below — of September. We have line of sight to hit revenues of around $8 million, which is certainly a positive, and if you are to previous so we are very keen that we were able to demonstrate a positive eye. So what are the key in order to achieve the $8 million for the end of the year, will certainly increased sales in production, so making points especially with Airbus and — so we are very excited about that.

Fabrizio Ponte executive
#3

Another significant revenue component — and those of you who joined earlier updates will recall this — is that back in April we secured a highly significant award from the Department of Defense: the Deep Edge submarine contract, valued at $4.2 million. We have been putting in diligent effort to bring in that $4.2 million in revenues and, even more importantly, to collaborate with them so that Norsk Titanium becomes qualified for new applications. Also important: we installed the first machine inside Airbus. That took place over the summer. We'll cover that in more detail later. We landed a significant landmark purchase order from Rolls-Royce for development parts. That has us very excited, since it opens up opportunities in the engine market. And on top of all that, we are working extremely hard to secure yet another landmark qualification order tied to a very high-rate missile defense program. We'll get into that later in the presentation. We're very excited about it. Ashar, please continue. So here's a quick refresher on our strategy. We operate across 3 different verticals. We're engaged with core OEM programs in aerospace and defense. We're pursuing short-cycle sales, primarily industrial, and then there's the newest addition, the RPD ecosystem.

Fabrizio Ponte executive
#4

You recall that across the 3 different verticals, we have various milestones we need to reach. And I'm very, very pleased to say we've been achieving those milestones really across the board. On core programs, a very virtuous trend in short-cycle sales, primarily with hitech. We're going to talk about that. And as I anticipated, we placed our first machine with Airbus in a very successful fashion. We're going to talk about that later on. Well, let's talk about a deep dive in core OEM programs. Ashar, you want to go to the next slide. All right. So we -- I made a reference to the fact that the highest parts sales with Airbus and hitech. Yes, we've been delivering lower fan fittings and the sales related to that have been steadily increasing throughout the year. I can tell you that, that big expectation since we deliver Board expecting to deliver. We continue to deliver parts to Boeing a Leonardo also -- those we have increase in that. And we have been very active on discussing the Wave 3 production order with Airbus. We've been very active across the board, very busy throughout the summer. We responded to another SKU.

Fabrizio Ponte executive
#5

So at this point, we've worked things out with Airbus to get this over the finish line and secure that production award. I believe last week we put out a press release regarding Rolls-Royce. That's something we're quite enthusiastic about. By now we've been collaborating with Rolls-Royce through a substantial portion of last year as well as this year. It makes us very glad that Rolls chose to give us this development order for a replacement part. In our view, the engine market represents a really big opportunity for Norsk Titanium RPD and for titanium structural components. So getting a key development order from Rolls-Royce carries a lot of meaning when it comes to the outlook for the RPD technology. All right. Let's turn to defense, which is a really exciting area. I'll begin on the right-hand side. Well, I'm glad to say we secured the first sale production order from Northrop, and right now we're in the process of delivering parts. On the end initiative, that $40 million program has been realized. We're hitting every milestone. We're recognizing all the revenues. Even more important than that, we're taking major steps toward quantifying our technology with the Navy and for certain marine applications. So that's definitely a very positive factor.

Fabrizio Ponte executive
#6

And finally — certainly not the least important item — we're right now engaged with a defense prime whose name hasn't been disclosed, aiming to secure our initial appeal for a particular part that will be installed in a particular system. That PO covers development parts destined to undergo testing, and once those tests are passed, we anticipate a production order of real significance, which will already turn into revenues during 2027. It's a fast-track program, we've been collaborating extremely closely — this program is very exciting for Norsk Titanium — and we expect the initial PO for the development parts to arrive imminently. Ashar, would you move us to the following slide. All right. Turning to short cycle sales — clearly, we've been supplying the U.S. Department of Energy with the part we developed over earlier years. That has benefited our parts revenues. Yet the key point is that we're seeing a strongly positive trend at hitech, powered by expansion in semiconductors and, once again specifically, AI data centers and really semiconductor versus brands. We will deliver — in fact, we intend to raise sales this year several times over compared with last year, and we anticipate more than doubling and potentially tripling sales once more next year, in 2027.

Fabrizio Ponte executive
#7

We anticipate this area will generate highly significant sales over at minimum the coming 2/3 years, and we're collaborating with hitech and the OEM to lock in all of that potential. That's going to be a really substantial portion of our revenues that will assist us in reaching breakeven by 2028. Ashar, would you move on to the following slide. Finally, as I noted right at the start of the call, the RPD ecosystem replaced our machine with Airbus right during summertime. It performed very well. I believe it exceeded even what we had expected. We managed to get the acetate factory done within a couple of weeks. And soon afterward the OEM could produce parts using our technology. That is truly remarkable -- if you take into account that in other cases, we are technologies, it required years to reach that stage. So this stands as proof of RPD's maturity and of Norsk Titanium's capacity to roll out the technology alongside our OEMs. We're engaging very actively with Airbus on this, and we anticipate being able to extend that beyond even these OEM with our OEMs, with whom we already have a quite active conversation.

Fabrizio Ponte executive
#8

We’d now like to hand things over to Ashar for the financial section. Ashar, please go ahead.

Ashar Ashary executive
#9

Okay, thanks Fabrizio. In Q3, we recorded higher revenue — revenue rose year over year in Q3. Cash burn declined versus the prior year, from $2.4 million in 2025 down to $2.2 million in Q3. Out of the $2.1 million in revenue and other income for Q3, several production accounted for $0.6 million, while development and services came to $1.2 million in Q3. That takes our year-to-date revenue to $5 million. For full year 2026, our forecast for revenue and other income is roughly $8 million. As I said, cash burn was $2.2 million, a bit above our Q2 cash burn and our first half cash burn of $2.1 million. That said, it's what we anticipated and consistent with the revenue growth we expected in Q4. So working capital went up in Q3 ahead of Q4 revenue. Cash at the close of Q3 stands at $27.2 million. Okay. As a quick reminder for everyone, these are the long-term targets we're pursuing. For 2028, on our base case, we expect to reach breakeven. We're also working on upsides, as Fabrizio mentioned earlier. And in 2030, on our base case, we expect roughly 50% utilization of our capacity and EBITDA of approximately 30%.

Ashar Ashary executive
#10

Just as a quick reminder, we have production — 35 production machines capable of generating roughly $300 million in revenue, and our capacity is matched to that $300 million. Fabrizio?

Fabrizio Ponte executive
#11

Thank you, Ashar. So to wrap up — well, I have to say the company makes me very proud. I've now reached the milestone of 1 year of tenure with Norsk Titanium. We redefined a strategy. We are delivering on the strategy. If you look at the numbers, you can see that we are more than doubling sales. Our production is trickling and it's going to represent more than 50% of our sales at the end of the year. We have commercial momentum across the board. We talked about defense and the undisclosed defense prime. This is going to be a breakthrough for Norsk Titanium, and we are expecting an imminent order. So we are very excited about that, and we're working very hard in order to win that one. We are making products with Airbus with revenues from parts, which have been growing very much in 2026, but at the same time also on the production order, which we are making products across the board at Airbus, with supply chain and program. We placed a machine at a very important OEM. We proved that we can deploy our technology with selected OEMs and they have been able to make parts with our technology and machine.

Fabrizio Ponte executive
#12

By year-end, we anticipate reaching $8 million. That, naturally, would represent an initial move toward putting ourselves in a position to break even by 2028. And our odds of accomplishing that, we believe, are likely growing nearer. I believe we're at 16 minutes past the hour. So we'll wrap up our presentation at this point, and we're going to open things up for questions. We're very glad to take your questions. Joachim, would you like to take over?

Analyst analyst
#13

Given the $27.2 million cash balance at September 30, with average Q3 cash burn of $2.2 million per month, how do you expect to fund the business through your 2028 breakeven target?

Ashar Ashary executive
#14

Right. So at the close of Q3, our cash balance stands at $27.2 million. Cash burn should decline in Q4, and as revenue increases in 2027, we anticipate that burn will shrink. We'll manage toward that. Naturally, we're continually reviewing a range of funding options and sources. So we keep exploring those. And by 2028, we expect to have raised additional capital — through debt or equity — to fund working capital and to fund our growth through 2028.

Analyst analyst
#15

With the Airbus Wave 3 RFQ now submitted, what milestones or open questions are still outstanding before Airbus and NTI can begin production?

Fabrizio Ponte executive
#16

Yes, I’ll handle this one. We’re talking quite actively with Airbus’s supply chain, and we’ve engaged with the Program regarding various components that are going to be assigned to additive manufacturing within RPD. So we’re awaiting the final feedback on that. Once we have it, a development phase will follow, lasting a few months for each part that gets awarded, and that should convert into revenues. As for how long it will take, it’s hard to say, as always. Working with Airbus is, as you know, a complicated undertaking. Still, we’re very, very confident that we’re headed in the right direction and are well placed to secure a meaningful award on Wave 3.

Analyst analyst
#17

All right, let's take the next question. Should the defense prime contract be awarded, would that mean you have to raise more capital? Is that order large enough to pull breakeven forward, or would it call for additional working capital?

Ashar Ashary executive
#18

At this point we can't predict what the size of that order will be. We have certain estimates and forecasts for it. Even so, we hold to 2028 as our breakeven target, and our capital planning is built around that 2028 forecast. Naturally, as revenue grows, working capital needs will rise, and we are factoring that into our forecasts. However, we aren't forecasting specifically out in terms of the prime contract, the prime contract. We do expect it. We have certain estimates there, and we are also continuing to plan through the capital requirements and the working capital with that. But our 2028 breakeven target remains.

Analyst analyst
#19

Thanks. It seems there aren't any further questions right now. So I'll wait a few seconds in case somebody joins. All right. One more question. Do you have plans for bigger machines?

Fabrizio Ponte executive
#20

Yes. I mean, we're also working on developing the machine itself, yes. So — because some of the parts we're currently working on are larger than what our existing machines can actually produce. So yes, we're working on a version or generation of our machine that's going to make bigger parts. And that's part of the product, both in defense and in commercial aerospace, yes.

Analyst analyst
#21

Moving on to the next question: considering the MMPDS and net cap qualifications you already hold, what further approvals did you need in order to be an approved supplier for Rolls-Royce development?

Fabrizio Ponte executive
#22

Well, I mean, I don’t believe any further agency approvals are required for Rolls-Royce. I think we’re working closely with them on this particular part, as well as on several other parts, in order to prove the technology. So there’s going to be some period of active work directly with Rolls-Royce. And once those parts are approved, we’re going to move into sales.

Analyst analyst
#23

Thanks. I’ll wait a few seconds in case a few more questions come through. All right. It looks like there are no further questions today. So on that note, we’ll wrap up today’s presentation and Q&A session. Thanks to Fabrizio and Ashar for presenting, and to everyone who joined us. The presentation and the recording will be accessible via Norsk Titanium’s Investor Relations website. Thank you, everyone, and have a great day.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Norsk Titanium AS transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to Norsk Titanium AS earnings transcripts and 132,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.