QuickLogic Corporation (QUIK) Earnings Call Transcript & Summary
May 12, 2026
What were the key takeaways from QuickLogic Corporation's May 12, 2026 earnings call?
In the first quarter of fiscal 2026, QuickLogic Corporation (QUIK) reported revenue of $5.1 million, reflecting a 16.5% increase year-over-year but falling short of guidance by approximately $450,000 due to contract delays. The company continues to target 50% to 100% revenue growth for the fiscal year, supported by new product launches and strategic contracts, with management signaling confidence in achieving this goal despite the Q1 revenue miss. Non-GAAP net loss for the quarter was $1.3 million, or $0.08 per share, an increase from the prior year's loss of $1.1 million.
What topics did QuickLogic Corporation cover?
- Revenue Growth Target: Management reiterated their goal of achieving 50% to 100% revenue growth in 2026, stating, "we are still tracking to be within that range" based on Q1 performance and guidance for Q2. This growth is expected to be driven by new product revenue and strategic contracts.
- RADPro FPGA Development: QuickLogic introduced the RADPro FPGA at the HEART Conference, with initial shipments of development kits expected to contribute a low six-figure amount to Q2 revenue. Management noted, "we have already signed an MOU with one DIB to accelerate the mutual evaluation of a potential RadPro chiplet application."
- Contract Delays Impacting Revenue: The company faced delays in contract awards that affected Q1 revenue, which was approximately $450,000 below guidance. Elias Nader stated, "this shift forward in revenue recognition does not impact the full year revenue outlook that Brian shared earlier."
- Gross Margin Expectations: Non-GAAP gross margin for Q1 was reported at 39.6%, below the expected range of 45%. For Q2, management anticipates a gross margin of approximately 42%, with a full-year target of 57%. Nader explained, "there's going to be more higher gross margin mix in the second half than in the first half."
- Cash Position and Funding: QuickLogic ended Q1 with $6 million in net cash, up from $3.8 million in Q4 2025, bolstered by $3.2 million raised through an ATM offering. The company expects to close Q2 with just under $12 million in net cash, indicating a strong liquidity position.
What were QuickLogic Corporation's May 12, 2026 results?
- Revenue: $5.1 million (up 16.5% YoY, but $450,000 below guidance)
- New Product Revenue: $4.3 million (up 14.2% YoY and up 50.7% from Q4 2025)
- Mature Product Revenue: $0.8 million (up 31.7% YoY, down 14.2% from Q4 2025)
- Non-GAAP Gross Margin: 39.6% (below the expected 45% range)
- Non-GAAP Net Loss: $1.3 million (loss of $0.08 per share, compared to $1.1 million loss in Q1 2025)
- Net Cash: $6 million (up from $3.8 million in Q4 2025)
QuickLogic's first quarter results indicate a solid foundation for future growth, despite a revenue miss due to contract delays. The company's strategic initiatives, particularly in developing the RADPro FPGA and expanding partnerships, position it well for achieving its ambitious revenue growth targets. Investors should monitor contract awards and customer adoption rates as key catalysts for the stock moving forward.
Earnings Call Speaker Segments
Thanks, Sherry, and I'm glad all of you could join us. With us today are our President and Chief Executive Officer, Brian C. Faith, and our Senior Vice President and Chief Financial Officer, Elias N. Nader. Before we go further, keep in mind that some things QuickLogic says on this call are forward-looking statements that carry risks and uncertainties. These cover, among other things, remarks regarding our future profitability and cash flows, what we expect for our future business, the timing of our government contract and payments connected to it, how large potential contracts may be, and anticipated adoption rates and/or orders from our customers. Several elements might lead to outcomes that vary from what's expected. These include postponed adoption by the market of the company's newly launched offerings, whether design prospects can be converted into sales to customers, our capability to substitute revenue lost when products hit end of life, how much design work customers undertake and when, whether the market embraces what those customers sell, the possibility that fresh orders won't translate into revenue down the road, and whether we can roll out and produce new items based on sophisticated wafer technology within the required timeframe? Several factors could cause results to differ: whether we can properly promote the low power consumption, attractive price points, and rapid market readiness of our latest offerings; heavy rivalry from other companies; our success in recruiting and keeping skilled staff; fluctuations in what customers want to buy or what suppliers can provide; overall economic circumstances; political developments; trade conflicts between nations; natural calamities; and other disruptions to business operations that might interfere with the supply, shipment, or customer interest in the company's goods, plus adjustments to tax rates and the possibility of owing extra taxes. To learn more about the risks, unknowns, and presumptions behind such variations, kindly review the risk factors covered in QuickLogic's latest periodic filings with the SEC. QuickLogic isn't on the hook to refresh any forward-looking statements or information; those reflect conditions only as of the dates they were made, even if new details or later developments come along. During this call, we'll be presenting figures that don't follow GAAP. For a full breakdown reconciling our GAAP numbers with the non-GAAP ones, plus our other financial statements, take a look at the earnings release we put out today. We've also placed a refreshed financial table on our IR web page, and it contains the latest historical non-GAAP figures. One more thing to keep in mind: QuickLogic shares news about its operations through its website, the company blog, its corporate Twitter account, its Facebook page, and its LinkedIn page. That kind of data could count as material, and QuickLogic might rely on those same outlets to meet what Regulation FD requires it to disclose. Once today's earnings call wraps up, a transcript of the remarks we prepared for it will go up on QuickLogic's IR page before long. At this point I'd like to hand things over to Brian. The floor is yours, Brian.
Thanks, Alison. Hello, everybody, and I appreciate all of you being on this call for our Q1 26 earnings discussion. Since the previous time we spoke, we've achieved meaningful strides toward our objective of producing year over year revenue growth of 50% to 100% during 2026. Because of that, our expectations remain that storefront, along with our recently launched RadPro FPGA, will play a part in the revenue expansion and second half profitability we foresee. In an April 9 press release, we told everyone about introducing and showing off our brand-new RadPro FPGA and development kit at the Hardened Electronics and Radiation Technology, or HART, conference held last month. HEART is an extremely niche event where people attending have to prove they hold US citizenship, plus demonstrate that their employer or academic institution is certified via the joint certification program. RadPro serves as our trademarked name for FPGAs built to withstand radiation. The test chip we displayed at the HEART conference alongside our RadPro Dev kit came from internal funding and stands apart from our contract with the US government. These test chips were built using the GlobalFoundries 12LP process, the very same one that numerous DIBs rely on for radiation hardened ASICs. What this shows is that beyond proving out our new discrete RadProPGA successfully, we've demonstrated our ability to meet requirements for eFPGA as well as radiation hardened ASICs and SOCs, all manufactured on that GlobalFoundries 12-LP process. Our presentations and discussions at HEART with top DIBs were highly successful, and since then we've sent out several RadPro Dev kits. Those shipments will add a low-6-figure amount to our Q2 revenue. Although we figure it will take until 2020 for Dibs to thoroughly assess our new RadPro FPGA, an MOU has already been signed with 1 DIB to speed up joint evaluation of a possible RadPro chiplet use case. Beyond what we've accomplished with our RadPro FPGA, we put out a March 17 press release announcing our fourth contract aimed at Intel 18A technology. These early contracts have been on the smaller side, but combined they're worth close to $2 million now. Together they form the groundwork for bigger contracts we hope to secure later in the year. Intel 18A test chips were the subject of the first 2 contracts. quarter. We look forward to getting our test chip allocation from the first contract later this; we think the information gained from evaluating those test chips will boost our chances of landing new production contracts. A 1 million LUT feasibility study made up the third contract, and it prompted us to make some significant architectural improvements that we can apply across every advanced fabrication node. Now that those architectural improvements are in place, we're able to serve lucrative markets needing extremely high density eFPGA cores and ASIC designs, plus very high density discrete FPGAs. That greatly widens our SAM for eFPGA hard IP and discrete devices, covering chiplets and various storefront opportunities. The fourth contract, and the newest one, builds on the architectural improvements that came out of the 1 million LUT feasibility study; under this contract, we're going to provide Hard IP for an extremely large Intel 18A eFPGA core to support our customers' ASIC design. Tape out for the test chip of that ASIC design is targeted for the second half of 26. We expect a fifth contract, in the mid-6-figure range, from this customer at some point in 2026, which would extend our efforts on very high density architecture even further. When the funding will arrive is still not certain, and our talks with this DIB have grown to cover the possibility of QuickLogic supplying storefront services for a customer-designed ASIC that would incorporate our eFPGA hard IP. Over the next few months, we hope to find out more about both the possible expansion into storefront services and when this potential award might come through. Beyond these DIB contracts, we're engaged in close work with a sizable commercial customer on a contract based on Intel 18A worth several million dollars. During our previous conference call, I stated that I anticipated this contract being awarded in late Q2. The customer, though, is looking at expanding the size and function of the eFPGA core within their ASIC so they get more programmable flexibility. That's a favorable development for QuickLogic, but it means we now project the award to come in Q3. On December 8, we put out a press release saying Idaho Scientific had chosen our eFPGA hard IP for forward-leading hardware-based cryptographic solutions aimed at mobile IoT infrastructure and defense systems applications. We continue to support integrating our Hard IP, with tape-out expected next year. Idaho Scientific brings a deep history of using FPGA technology to produce rugged security systems capable of adapting rapidly to shifting external threats, free of the weaknesses inherent to software-based solutions. Through integrating our eFPGA Hard IP into its secure system-on-a-chip processors, Idaho Scientific is able to strengthen its cryptographic security further and reach new markets far faster, with reduced risks and reduced costs. Since our previous conference call, Idaho Scientific has become fully integrated with General Dynamics Mission Systems. We think that integration could open up new opportunities for QuickLogic. Last year, we announced an eFPGA hard IP contract with a new defense industrial base customer, valued at $1.1 million, that will be fabricated on the GF 12LP process. This application uses a large block of our EF Hard IP for critical functions, a trend we're observing in designs aimed at advanced fabrication nodes. Working together with this DIB and its end customer, we used the large eFPGA core to secure a new 7-figure contract, finalized last week, that will add to Q2 revenue. This award's delay explains why our Q1 revenue came in below the midpoint of our guidance. Under this new agreement, we’ll receive test chips to put into an evaluation kit. That kit is now slated for late 2026, and it will work with the common third-party development environments that both DIBs and commercial customers use. As a result, those customers can speed up system-level evaluations, along with designs able to employ either a storefront version of the discrete FPGA or our eFPGA hard IP inside an ASIC. At the same time, we’re looking into whether we can take the FPGA from this contract and use it as a storefront chiplet; some of our partners already have shown interest in that idea. Mostly because of the strategic initiatives begun in 2025, we think we’re gaining meaningful momentum in chiplet markets. Right now we’re handling many proposals at different stages, covering direct US government, DIB, and commercial uses. Among these proposals are opportunities aimed at multiple fabrication processes, such as GlobalFoundry’s 12LP and Intel 18A. A year ago, the commercial chiplet ecosystem was stuck in arguments over communications and protocol layers. In reply, we launched phase one of our digital proof-of-concept chiplet program as a way to proceed before customer commitments; doing so also speeds up our storefront chiplet efforts. Inside the company, we call this POC. Backed by our large strategic partners, we used our existing eFPGA hard IP and third-party IP that was easy to obtain to advance this program quickly and with little investment; at the Chiplet Summit in mid-February we gave a paper about the POC, and in March we delivered a presentation with Intel Foundry at an event at the Government Microcircuit Applications and Critical Technology, or GOMAC Tech, Conference. As a reminder, QuickLogic belongs to the Intel Foundry Accelerator Ecosystem Alliance program, taking part in the chiplet, IP, and USMAG alliances. On our previous conference call, I said the main takeaway from our Chiplet Summit presentation backs our optimism that chiplets will gain momentum in 2026. That view was reinforced at the GOMAC Tech Conference. The main obstacles now are interoperability gaps, and we think a storefront FPGA chiplet is the sensible answer for a programmable bridge. With that, I’ll hand the call to Elias so he can present the financial data.
Thanks, Brian. Hi everyone, and good afternoon. In the first quarter, our revenue was $5.1 million. That's up 16.5% from Q1 2025 and up 35.3% from Q4 2025. We came in $450 thousand below the midpoint of the guidance we'd provided. The cause was a delay in awarding one specific contract, which we finalized last week. Revenue from that contract will be recognized ratably and will now run through Q1 27 instead of through Q4 26; deferring that recognition doesn't alter the full year revenue outlook Brian laid out earlier. New product revenue in Q1 was $4.3 million, and mature product revenue was $800 thousand. Against Q1 2025, new product revenue increased 14.2%, and against Q4 2025 it was up 50.7%. Mature product revenue was up 31.7% against Q1 2025 and down 14.2% against Q4 2025. Non GAAP gross margin in Q1 was 39.6%. That was below our outlook of 45% plus or minus 5%. Inventory reserves of about $300 thousand, specifically $198 thousand, drove the shortfall. That's versus 45.7% in Q1 2025 and 20.8% in Q4 2025. Non GAAP operating expenses in Q1 were $3.3 million. That's versus $3 million in Q1 2025 and $3.5 million in Q4 2025. Our Q1 26 non GAAP net loss was $1.3 million, equal to a loss of $0.08 per share. That's versus a non GAAP net loss of $1.1 million, or $0.07 per share, in Q1 2025, and a non GAAP net loss of $2.8 million, or $0.17 per share, in Q4 2025. The difference between our GAAP and non GAAP results is mostly due to non cash stock based compensation expenses. Stock based compensation in Q1 was $858 thousand, versus $904 thousand in Q1 2025 and $744 thousand in Q4 2025. Restructuring costs were $11 thousand in Q1 26. That's versus $141 thousand in Q1 2025 and zero in Q4 2025. In the first quarter, 2 customers each accounted for 10% or more of total revenue. Net cash was $6 million at the close of Q1; that's versus $3.8 million in net cash at the close of Q4 2025. That $2.2 million increase in net cash includes $3.2 million raised through our ATM during Q1 2026. Now let's move to our guidance and outlook for the second fiscal quarter, ending 06/28/2026. Based on backlog and customer forecast, our total revenue guidance for Q2 is $6 million plus or minus 10%. We expect that total to split into $5.2 million in new product revenue and $800 thousand in mature product revenue; we anticipate mature product revenue increasing in the second half, bringing the full year total to approximately $4 million. With the expected Q2 revenue mix, non GAAP gross margin for the second quarter should be about 42% plus or minus 5%. On the prior conference call, I noted that several items are putting pressure on our non-GAAP gross profit margin in 2026. Looking at the full year, our non-GAAP gross profit margin model remains at about 57%. Something to remember is that the way this industry operates means certain expenses occasionally land in COGS. Instead of OpEx, or get capitalized, such as particular costs. Labor falls into those classifications, along with tooling tied to IP contracts. Quarterly gross margins and operating expenses can therefore swing, though at the operating line these movements usually cancel out. That said, for Q2, non-GAAP operating expenses ought to land at $3.3 million, give or take 5%. For the full year, we still anticipate non-GAAP operating expenses near $13.5 million. That roughly 14% projected rise in non-GAAP OpEx against 2025 backs the 50% to 100% revenue growth we're expecting in 2026. Brian covered that earlier. After interest and other income, our Q2 net loss forecast is about $800 thousand, equal to a loss of approximately $0.04 per share. Based on our current view, we anticipate non-GAAP profitability for 2026. The main difference separating our GAAP and non-GAAP figures relates to non-cash stock-based compensation expenses. For Q2, we anticipate that compensation reaching about $900 thousand, similar to Q1 26 and Q2 25. One reminder: stock-based compensation shifts around over the year and may vary quarter to quarter, depending on grant timing. We generated approximately $6.4 million in net proceeds in Q2 2026. Through our current ATM. Based on our current view, no further sales through our current ATM are expected for the remainder of fiscal 2026. Excluding funds raised via our ATM, we anticipate Q2 cash usage of about $500 thousand. Roughly $500,000. Counting funds raised via our ATM, we expect to end Q2 with just under $12 million in net cash. Bear in mind that our cash usage could vary based on when specific contract payments and receipts arrive during the quarter. Based on our current view, we anticipate positive cash flow in 2026. As noted in our 8 k filed on 04/30/2026, we've added a new banking partner. Under this new arrangement, and factoring in what we've raised through the ATM, we intentionally cut our credit line to $10 million and secured improved terms that will lower our borrowing costs. Thanks for your time; and with that, I'll turn the call over to Brian now for his closing comments.
Thanks, Elias. Everyone here at QuickLogic has put in a great deal of effort to reach a long list of concrete milestones, and those accomplishments have positioned us nicely for 2026 and the years after. That execution, together with the strategic investments we've made and the strong partnerships we've built with customers, is what's driving the revenue growth we expect to start this year. The biggest investments we've made are the development of eFPGA Hard IP for Intel 18A technology and the tape out of our first RadPro FPGA test chip. Because we funded these investments ourselves, we now hold a distinctive position in the market, and they've allowed us to form close alliances with strategic customers that we think will pay off for QuickLogic for many years ahead. Now that our first RadProPGA is in hand, orders for our RadPro Dev kits for evaluation have already come in at a substantial number. revenue. Shipping these dev kits will contribute a low-6-figure amount to our Q2 revenue. This puts us in a strong position to serve applications across various levels of radiation hardened discrete FPGAs and eFPGA Hard IP for customer ASIC and SOC designs. Our early investments, which made us the first company — and as things stand today, the only one — to offer eFPGA Hard IP for Intel 18A, have also let us build strong customer alliances. 1 of these customers has already given us 4 contracts, with a fifth expected during 2026, Through these contracts, we expect to receive our allotment of test chips that will let us fully characterize how our eFPGA hard IP performs on Intel 18A; once we have these data, I believe we can speed up new contract awards for DIB and commercial applications. This customer also funded the 1 million LUT on Intel 18A feasibility study, which led us to implement a number of architectural enhancements. Thanks to these enhancements, our SAM has expanded to include the lucrative markets for very high density discrete FPGAs and eFPGA hard IP blocks, in ASIC and SOC designs. Beyond the many initiatives I've laid out today, all of which are meant to power our long term growth, we plan 3 multi project wafer, or MPW, tape outs this year. All 3 tape outs are for chips we intend to sell through our storefront program. And as I said earlier, customer contracts already on the books will fully cover the cost of 2 of these tape outs; we believe a customer contract will cover at least part of the third tape out. Our strong outlook for 2026 rests largely on the foundation we built during the preceding years. As I hope we've made clear during this call, the QuickLogic team is intensely focused on continuing to execute the strategic milestones that we believe will fuel our growth and profitability for years to come; with that, we'll now open the call for questions.
Okay, that's great. Brian and Elias, thank you both for taking my questions. My apologies — I'm on the road at the moment. I hope the background noise isn't bothering anyone too much. Oh, not at all. Let me gather my thoughts. So, Brian, here's my first item: you brought up your customers who are putting in orders and getting the test chips — the RadPro Dev kit, if I'm not mistaken. Completing that will consume most of the year for them. I just want to hear it confirmed that this remains well within the timeline required to hit certain key programs. I'm sure that's the purpose behind these. I'd simply like reassurance that there's zero risk here.
Yes, Richard. We've modeled a number of those key programs that, as you know, we've been designing this chip around from the very beginning. It aligns well with them. Let me remind everyone: that's exactly why we spent money to fund our own test chip — to ensure we had app chips ready on schedule on test kits to fit within that evaluation window. We think we're within it, and the response has us thrilled — the orders along with the pricing and lead-time inquiries for the dev kits that emerged from the HEART conference, roughly 11%.
All right. With regard to these clients, what do you anticipate happening next? Simply give us a sense of what comes after this. Which milestones should we be watching for?
Well, there are a lot of milestones on the path to being designed into an architecture, though I think in terms of the outward-facing ones we're able to discuss, over the course of this year, folks will carry out their own functional evaluation of the device tools, maybe their own radiation testing, while we do the same; and then, as I mentioned during the call, around the end-of-year window, that's the point when we anticipate beginning to receive feedback from people regarding their interest in designing us into those architectures, ideally for programs of record and even for ones that don't exist yet. That fits nicely with what we believe the timeline will be for our upcoming chips. As a result of this entire initiative. And as you might expect, we're monitoring those timelines quite closely, so that architecture, completion, and the requirement for new silicon all align. During the 2027 period. All right; glad to hear it. Appreciate the update, Brian.
I'd like to pose something regarding Intel 18A. It appears you're making excellent headway with 1 specific client, and I believe you said this is a DIB. I suppose I'd really like to understand the sort of scope you anticipate or are hoping for on that node, which, as I understand it, is being widely encouraged by the US government among the DIBs. We've heard plenty regarding 1 customer. Should we anticipate additional ones? What does the pipeline look like for, you know, growth with Intel?
Yeah. In fact, we're monitoring, I'd say, a small number of possibilities across various customers, not merely this initial 1. Certain of them are examining the work we're undertaking and some of these architectural efforts and evaluating how they could leverage that to gain from those improvements as well, for greater density. A few of those possibilities might rely on our lower density architecture as it stands now. So we have multiple. As I mentioned, it's a small number. Thus I believe we'll build on that at some point during this year. And I've stated this in public. I'll repeat it now; it isn't only the defense industrial base that's evaluating Intel 18A. From our standpoint for eFPGA, it actually extends to the commercial side; so we're aiming for a commercial victory this year too; for our IP on that point. Okay.
Glad to hear that, Brian. Appreciate it. Let me ask this, then. Maybe I overlooked it, but I didn't catch anything addressing the revenue growth trajectory you brought up during the previous earnings call for this year, which was 50% to 100% of type. If that's the case, my apologies. Still, I'd like an update on your thinking, and, you know, what the shape of the year looks like with the guidance you've given. Sadly, I haven't been able to refresh my models, so I don't have a particularly smart way to pose this. But maybe you could just sort of walk me through, top down, how you plan to tackle that. Are you leaning at all meaningfully toward the low end or the high end of that figure?
No. Actually, you likely hadn't logged in at that point, but the very first thing I stated once I welcomed everyone was the progress achieved toward hitting that 50% to 100% revenue growth target for the year. And when you consider what we delivered in Q1 plus our guide for Q2, that already equals 80% of last year with just the $11 million in the first half against $13 million something last year; so I believe we're making truly solid progress there. Really across the board, on the IP side with 18A. Delighted to have the test chips and dev kits out for the RadProPGA since that's a massive uplift there. And then likewise on a few of those new proposals we discussed earlier regarding various chiplet initiatives, storefront initiatives, and then reinforced by some of our mature business performing better in the second half than the first half. So we feel good about landing in that range we discussed when entering the year.
Alright. That's great. I appreciate you running those numbers for me. I'll follow through on that. Fantastic. We can take this offline and I'll come back with improved questions afterward, but I'm grateful for that, Brian. One final item, and this is likely directed at Elias regarding gross margins. What factors are behind the movement in gross margins, going from, I believe, somewhere in the 40s range to the 50 — what did my notes indicate? 57% for the year. That suggests quite robust levels for the back half. I just want to understand what's fueling that, Elias, and that's everything from me.
Yes. As you're aware, Richard, I've repeated this countless times. It's the hardest 1 to explain. Gross margin at this company fluctuates and varies, but how I see it is that the back half will carry a greater proportion of higher gross margin mix compared to the first half; take certain professional services, for instance — they generate lower gross margin than the IP or the product itself that you're selling; so when you ramp that up in the second half, as Brian mentioned, with roughly $13 million in the back half, that provides the reassurance that gross margin ought to be elevated. I'm still aiming for 57; if it lands at 55, no one should fire arrows at me. But honestly, that's a solid improvement over last year. I'll factor that in, get in line, and take whatever I can get.
Thank you, Richard.
Hi, everyone. We appreciate the chance to ask a few questions. I suppose what I'd like to bring up is possibly regarding the US government's strategic radiation hardening program. You got that $13 million final tranche during the previous year, at the start of this year. Do you have any fresh perspective on whether more funding tranches might come from that program later in this year?
Yes. Absolutely. As we discussed before, I believe I've stated publicly that the $13 million tranche should be fully recognized by us this year. Our work continues on developing these upcoming chips. And I think it's reasonable to presume we'd likely secure another contract before the year ends. That would carry it further still into 2027 and kind of finish out what's needed to wrap it up. Great. Yeah. We didn't actually get much air time devoted to that topic on the call simply because everything is going well. And we'd already mentioned it would be recognized this year. So it's kind of a given. Great. Great.
I think you've basically taken care of what I was going to ask next. Still, my read is that this suggests the completed chip design under that initiative is still scheduled to arrive before this year ends.
I'd love to be able to give you additional specifics about the program itself. That isn't permitted, so I won't be doing so on this call. What I can say is that we feel good about how we're carrying things out.
All right. So shifting gears a bit to talk about your RadPro Development kits. I believe you mentioned a number of those have already gone out. Was that to 1 customer, or several? Is there a way to get a sense of how varied those customers are at this point?
It's more than one. That's the first thing to say. And I'd add that how often people reach out with interest has gone up, now that we're able to discuss it more freely in the kinds of venues that carry weight. Take the HEART conference, for example. And there's a whole bunch of these — let's call them government, defense, radiation, oriented type conferences; they're usually a bit more boutique than, say, design automation conference or embedded systems. But the leads we connect with there are high quality. That's because it's so tightly focused. And after HEART, there's a great deal of interest in the dev kits. We're working through that right now. We even had messages just today from folks saying, hey. we're interested. what's the lead time and the cost stuff like that? So I think we'll keep shipping these all through the year. Which is great because that's a leading indicator of, a, interest in something like this, and, b, it just puts our software and devices in the hands of these customers; and some evaluating, which is exactly what we want. Right? Good to see skin in the game from our customers as far as engineering resources working with our technology. Perfect.
That gives us useful background. Maybe one last point from my side. I believe you handled well the explanation of how that one contract moved out of Q1 and into Q2. To put it another way, the entire year lands somewhere in the 50% to 100% range, and since a quarter of the year is already done, that remains a sensible range for the whole year. Might you be able to point to the two or three biggest factors that could push it from the low end of that range to the high end, or is it mostly just a question of timing in general?
Well, the answer I gave earlier to Richard's opening question regarding annual revenue and how it totals 5.2 thousand% growth — I mean, going by the present calculation, with $11 million during the first half, as I mentioned previously, that accounts for 80% of our result from last year. So I think we're progressing well toward hitting that range we talked about for the year, the 5.2 thousand%. As for what drives that growth: one component is continued delivery under the government contract, and as I said before, we're encouraged by the progress there. Another component, as we entered the year, was shipping those dev kits for the 18A — the embedded FPGA hard IP. One, as I pointed out, relates to this specific customer. We've already closed several deals with them, and getting this next one for the back half is still required, though I think we're encouraged about it. We also have a larger 18A IP contract in our projection for the year — an actual contract. So if you're following press releases on this, that's the commercial customer I mean for Intel 18A. Embedded FPGA IP. That's the one we'd need to reach the upper part of the forecast range. Right? As I said, I think we're encouraged about it. It felt great to finally get that one signed, which we did just last week; that's a nice milestone to mark off since it was a fairly significant portion of revenue we're projecting for the year. Yeah. A quarter later, but it's good to have it booked and to start executing on it. So not many more deals remain to be signed to get to the upper half of that range we discussed, roughly 55% of the way there. Perfect.
That's excellent to hear. I also value that additional detail. That's everything I had, folks. Thank you. Appreciate it, Tyler.
Hi, everybody. Thanks for giving me the chance to pose a few questions. Hello, Neil. Hey there. How are things? I'd like to begin by asking about the storefront side; as that business starts to grow, what's the right way to think about its financial characteristics? To be more precise, should storefront have a substantially different gross margin? Or a different way revenue gets recognized once you shift away from dev kits and test chips toward shipments of a product that repeats; and then just 1 more thing after that.
Yes. I'll handle that 1. Storefront is essentially the same as a traditional semiconductor device operation. We manage the supply chain, and we sell the device to the customer. At that moment, it's revenue plus gross margin. There's very, very little R&D layered on top since the devices are essentially finished. Therefore the gross margin, first, will indeed be greater. When you're modeling it, the license has historically indicated something like mid to high 60% for devices of this kind. That's roughly what an FPGA would be expected to deliver. However, I'd say it's more predictable and fluctuates less since it involves fewer services and much more of simply delivering a product, with revenue recognized when it ships and gross margin recorded at that moment because we know the cost of goods. It's far more predictable. Great.
Thanks. I want to turn to Quantum Leap Solutions now. My understanding is that a press release announced their designation as an authorized sales representative for your IP and chiplet products. How much can that channel accelerate bringing customers on board? Is the right way to think about the bigger opportunities as being about landing new commercial accounts, going somewhat deeper in defense aerospace, and helping customers make chiplet and ASIC integration choices sooner in the design cycle? Any additional detail would be useful. Thanks.
Yeah. I mean, at a company of our size, and like most semiconductor companies, we rely on our direct Salesforce. At QuickLogic, we have our own staff, plus outside Salesforce or indirect channels. Distributors or sales reps typically make up the indirect side. When you're dealing with what I'd term design-in products — situations where you truly need to engage at the architecture's early phases — you need sales reps who are somewhat specialized in that kind of technology. For us, that might mean semiconductor IP, or it could be EDA tools; it's all the things ASIC teams generally must work with, since our sales rep now has relationships with those ASIC design groups, which lets them get in the door. Those folks already have relationships in place, and trust has been built up, so they're in a position to bring those customer groups into contact with QuickLogic's technology. They've been in the picture for some time, and they're people we already know. It makes us glad to have them on board at QuickLogic. Defense isn't their only focus — they handle quite a bit of commercial work too. On top of that, their experience in assisting with EDA tool sales strikes us as quite solid, and that's a real plus, since any ASIC design team in need of IP is also going to need EDA tools, so they're familiar with the right contacts. That gives our operating model a real boost, because it translates into what we refer to as variable costs, given that the majority of sales reps and distributors are compensated in a way tied to success. Correct? Their role involves licensing support for intellectual property. They assist in moving devices, earning either a commission or a margin when those sales happen. That makes it a great method for connecting our company's requirements with their financial motivations. As I mentioned, I believe they're performing really well at bringing us to individuals or organizations that go past our numbers—clients that go past what we could manage using only our direct Salesforce at present. Does that address what you asked?
Yeah, yeah, thanks, that's great. Brian C.
Faith responding: Thanks, everyone, for being here and taking part today. We're eager to talk with you again soon — or during our next earnings call in August, whichever comes first. Thanks.
Thanks. That brings today's call to a close. You're free to hang up now, and we appreciate you joining us.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete QuickLogic Corporation transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to QuickLogic Corporation earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.