Home / Transcripts / Stanley Black & Decker, Inc. (SWK) · November 4, 2025

Stanley Black & Decker, Inc. (SWK) Earnings Call Transcript & Summary

November 4, 2025

New York Stock Exchange US Industrials Machinery earnings 62 min

What were the key takeaways from Stanley Black & Decker, Inc.'s November 4, 2025 earnings call?

In the third quarter of 2025, Stanley Black & Decker (SWK:US) reported total revenue of $3.8 billion, flat year-over-year, with adjusted earnings per share of $1.43. Management highlighted a significant improvement in adjusted gross margin to 31.6%, up 110 basis points from the prior year, driven by pricing strategies and supply chain efficiencies. Guidance for adjusted earnings per share for the full year was lowered to approximately $4.55, reflecting higher production costs and a noncash asset impairment charge of $169 million.

What topics did Stanley Black & Decker, Inc. cover?

What were Stanley Black & Decker, Inc.'s November 4, 2025 results?

The results reflect a mixed performance for Stanley Black & Decker, with positive gross margin improvements and cost reduction efforts overshadowed by lowered earnings guidance and flat revenue growth. Investors should monitor the company's ability to execute its strategic initiatives and manage macroeconomic challenges, particularly as they aim for long-term margin targets and navigate tariff impacts.

Earnings Call Speaker Segments

Michael Wherley executive
#1

Appreciate that, Shannon. Hello, everyone, and thank you for being with us on this third quarter call; joining us are Chris Nelson, our President and CEO, along with Pat Hallinan, EVP and CFO. Our earnings release came out earlier this morning, and a supplemental presentation that we'll be referencing is posted in the IR section of our website. A replay of today's webcast will be accessible starting at about 11 a.m. Eastern time. On this call, Chris and Pat will go over our third quarter results and a number of other topics, and after that we'll take questions. Throughout today's call, we will make some forward-looking statements reflecting our current views. Those statements rest on assumptions about future events that might not turn out to be accurate, so they carry risk and uncertainty. As a result, actual results could differ materially from any forward-looking statements we make today. Please see the cautionary statements in the 8-K we filed with our press release and in our most recent '34 Act filing. In addition, we may reference non-GAAP financial measures on the call. For the applicable reconciliations to the related GAAP financial measure and additional information, please see the appendix of the supplemental presentation and the corresponding press release, both of which are available under the IR section on our website. I'll now hand the call over to our President and CEO, Chris Nelson.

Chris Nelson executive
#2

Thank you, Michael, and good morning to all of you. It's an honor and it energizes me to take the helm at Stanley Black & Decker as we begin the next phase of our growth story. Since I came on board more than 2 years ago, we've concentrated our businesses on where we intend to compete, which end users we aim to serve and the markets in which we can lead. This effort has centered on being more selective, so that our resources go toward the areas offering the biggest opportunities and the strongest ROI for our businesses; each day we show up for our customers and end users to provide what they require at the moment they require it. This guiding principle will keep directing everything we undertake. Through the changes of recent years, Stanley Black & Decker has reinforced the base it stands on and sharpened where it aims its attention. The dedication and collective work of our approximately 48,000 team members, which carried us to where we are now, is something I feel great pride in. Building a best-in-class branded industrial firm is what we are after, and we'll get there by tackling the toughest and most complex problems our end users face; we deliver a collection of legendary brands to the market, ingenuity is woven into who we are; we maintain robust relationships with both customers and end users, and through our brands we unlock doors and gain entry to possibilities across markets around the globe. These foundational qualities, together with the renewed focus delivered by our transformation, have put us in position to win throughout industries set up for long-term growth. Stanley Black & Decker has achieved enormous progress toward the goals we set when our strategic transformation began. We delivered these results even as the operating environment shifted rapidly, consumer demand dynamics evolved and trade policy fluctuated; thanks to the operational proficiency and agility we've built through our strategic transformation, we're now able to serve our customers and end users with greater effectiveness and efficiency. Now that we've built a strong base and made the company much leaner and more focused, we think future results will come down to how well we carry out our strategy; that opens up a great opportunity to earn solid returns for shareholders while creating value for everyone involved. Going forward, we're still set to hit the $2 billion in cost savings we set as a goal when the transformation began more than 3 years ago, finishing by year-end 2025. Next up, we're aiming for a 35% adjusted gross margin, and we also want to keep strengthening the balance sheet. As we pursue our 3 strategic imperatives — activating our brands with purpose, driving operational excellence and accelerating innovation — we'll keep drawing on our capabilities and our strong financial base. Let me spend a few minutes going through each of those areas of focus, so you have a clearer picture of what's going to drive our profitable organic growth down the road. Our first imperative is bringing our brands to life with purpose. To reignite organic growth, we've moved away from marketing led by products and toward an approach led by brands and backed by the market. That meant creating a tighter feedback loop between our brands and end users, and also prioritizing innovations built to address what those users need most urgently. Every one of our core brands — DEWALT, STANLEY and CRAFTSMAN — has its own distinct identity, and we keep that differentiation intact while also keeping our target end users sharply defined. That strategic split determines how we prioritize where resources go and where investment flows among our major brands and the trades we focus on. On top of that, it lets us reach a broad portion of the total addressable market by way of targeted, high-output solutions that meet end users' needs in a way no one else does — everyone from commercial and industrial pros to residential building contractors and serious DIYers. At the heart of our organic growth plan is stepping up DEWALT's results, and we continue to place heavy emphasis on delivering above-market performance consistently for STANLEY and CRAFTSMAN. DEWALT exists to serve the world's most demanding professionals. With the support of an approach that leans more on data and targets specific groups, our commercial teams act locally and zero in on the most appealing growth opportunities using initiatives tailored to individual trades. To strengthen our connection with professional end users both on and off the job site, we've brought in close to 600 trade specialists and field resources over the past 2 years. Each of these hires generally pays for itself within 12 months. Our trade specialists go to job sites alongside DEWALT solutions, showing off and advocating for our latest innovations. They also collect valuable end user insights that help shape future product development priorities. Beyond that, through our Grow the Trades program, we're putting money into training new tradespeople and helping established professionals build additional skills. These efforts are fueling ongoing organic growth for DEWALT. What we're seeing from our results is feeding straight into how we decide where the money goes next, making sure our resources land on the opportunities with the strongest shot at faster growth, and along the way these efforts are creating DEWALT brand ambassadors. From commercial activation through operational execution, we keep close tabs on the metrics, and everything ties back to our strategic vision. Thanks to this work, we're also starting to see positive momentum come out of the international effort to revitalize the STANLEY brand. At the same time, the CRAFTSMAN brand campaign and portfolio expansion are moving forward, backed by a better margin profile and a strategy aimed at winning with ambitious DIY enthusiasts. Driving operational excellence is our next imperative. Even though everything begins with purpose-driven brand activation, our dedication to running the business exceptionally well and getting better all the time matters just as much to how we succeed. Now that the transformation is behind us, we're carrying out a lean-based operating system meant to produce yearly productivity gains — and we anticipate those gains will fuel both margin expansion and the resources needed to invest in faster growth. Running the business well also applies to how we distribute products. Refinements to our business processes, paired with a redesigned distribution network, have enabled our team to reach the strongest global customer service levels the company has seen in recent memory. As we establish strategic partnerships and multiyear growth plans alongside our channel partners, this will remain a leading priority. And last, innovation—which is really the driving force behind the value Stanley Black & Decker delivers to end users. We're speeding up innovation efforts so we can push forward and broaden our end-to-end workflow solutions spanning DEWALT, STANLEY, and CRAFTSMAN. Innovating at a quicker pace will shore up our standing to deliver preferred solutions for end users and generate growth for channel partners and for our brands. We recognize that end users, especially professional trades, want holistic solutions that boost productivity and safety for every task performed on a job site. Delivering that comprehensive set of solutions, customized for each trade's particular needs, all running on our strong and proven battery platforms—that's the opportunity in front of us. To make this possible, we've brought our engineering organization together under a single leader, aligning our global strategy with spending on core capabilities, design processes, and systems. Under this operating model, we're picking up the pace on how we roll out the product platforming method, a thorough framework for modular design and governance. It gives our engineers room to focus more time and expertise on solving end users' toughest, most complicated problems. It also lets us bring highly specialized solutions to market faster.

Chris Nelson executive
#3

So far this year, the team has sped up product development by 20%, and we see room for another 20% gain by 2027. On top of that, this method is making both product development and production processes more efficient. That lets us fully leverage our scale to reach cost leadership and unlock additional working capital efficiencies. By 2027, we intend to roll out platforming across about two-thirds of our product lineup, which supports our margin goal of 35% plus. Everyone across the organization is helping build an organic growth-focused culture, grounded in operational excellence; by carrying out this strategy, we think we can produce an attractive value creation opportunity. Twelve months ago, we laid out long-term financial targets. We still see those rates of growth that outpace the market, along with earnings capability, profitability, and cash generation, as the appropriate long-term financial objectives for our company. Our priorities for putting capital to work, we expect, will revolve around financing investment into the business, reinforcing our balance sheet, and supporting the dividend we have paid for many years. Once those needs are satisfied and leverage remains under 2.5x, buying back shares opportunistically becomes our preference for any capital that's left over. We act deliberately, draw on our fundamental strengths, and allocate capital in a disciplined manner. Even as we keep steering through a macro environment that shifts constantly right now, we think the steps we're taking are the ones needed to serve our end users and customers, safeguard the business's profitability, and move closer to our long-term financial targets. If we carry out the strategic priorities I've laid out to the fullest extent, we have confidence that we will produce robust shareholder value over the long run. Moving on now to how we performed in the third quarter of 2025. Thanks to our operational nimbleness, we posted sales and adjusted EBITDA that matched what we had anticipated. On top of that, gross margin came in higher than the same period last year, putting us back on track toward our expansion path and moving past the tariff-related disruption that hit us in the second quarter. We managed to achieve this even as macroeconomic conditions remained difficult. Revenue for the quarter totaled $3.8 billion, which was unchanged from the equivalent period a year ago and represented a 1 point decline on an organic basis, with pricing rising 5% and volume falling 6%. Growth in our DEWALT brand continued during the third quarter, lifted by professional demand that proved comparatively resilient. As we've seen in earlier quarters, the consumer environment is still soft. In Q3, our adjusted gross margin rate came in at 31.6%, which is 110 basis points higher than a year ago, mainly because of gains from our pricing approaches and efficiencies from the supply chain transformation. This outcome reflects how dedicated and focused our teams across the company have been. It stands out even more since we delivered it amid a shifting macroeconomic landscape and while production transitions are still underway. We anticipate staying on our path of improving adjusted gross margin year over year, with growth expected for the full years of 2025 and 2026. For the third quarter, adjusted EBITDA margin reached 12.3%. That's up 150 basis points compared to the same period last year, and the main reason was gross margin expansion. Adjusted earnings per share came to $1.43. That figure includes a $0.25 tax benefit, which we had originally thought would show up in the fourth quarter. Free cash flow during the third quarter was $155 million — a solid result, because we're managing working capital effectively while shifting more of our U.S. supply chain into North America. Turning now to segment performance, starting with Tools & Outdoor. Third quarter revenue there was about $3.3 billion, flat versus the prior year. And similar to what drove total company revenue, the factors at play in this segment were in line with our expectations. Organic revenue fell 2%, since a 5% gain from targeted pricing actions was outweighed by a 7% drop in volume. Currency tailwinds, plus a modest product line transfer out of Engineered Fastening, added 1% each during the quarter. The volume decline stemmed partly from expected price elasticities and partly from tariff-related promotional reductions in the retail channel. During our second quarter earnings call, we noted that price realization in the third quarter would align with our expectations tied to the April price increase, and it did. As previously disclosed, we're rolling out a second price increase in the fourth quarter so we can sustain our innovation and brand investments amid pressures from tariff-related cost increases. On this call, DEWALT — the strong professional brand that anchors our portfolio — maintained solid forward motion and delivered top line growth once again. Revenue grew for this brand in each of its product lines and across all regions. That result reflects how our ongoing, focused spending on innovation and market activation is paying off. For the Tools & Outdoor segment, adjusted margin came in at 12%, which is 90 basis points higher than the same period a year ago. The margin gain was driven by price realization and efficiencies from our supply chain transformation, though tariffs, lower volume and inflation worked against it in part. Now turning to how each product line performed. Organic revenue for power tools fell 2%, largely attributable to promotional cancellations tied to tariffs in North America, combined with continued weakness in consumer demand. Hand tools organic revenue was unchanged. On the commercial and industrial side, things went well, but that was offset by softness in retail. Organic revenue for Outdoor declined 3% as a lackluster outdoor season wrapped up, a period when independent dealer partners focused on clearing out what they still had on hand. As we move toward preseason ordering for 2026, we anticipate that inventory levels will be right-sized. Turning to Tools & Outdoor results by region: in North America, organic revenue was down 2%, and the trends there tracked with what the segment overall experienced. End user demand, measured by U.S. retail Tools & Outdoor POS, started the quarter with momentum but lost steam as time went on, leaving aggregate third quarter performance roughly unchanged in dollar terms. In Europe, organic revenue came in flat. The U.K. saw growth And key investment markets, Central and Eastern Europe among them, saw gains that were canceled out by weaker conditions in France and Germany. In the Rest of World, organic revenue fell 1%, driven mainly by areas of softness across Asia. Now to Engineered Fastening. For the third quarter, revenue was up 3% as reported and up 5% organically versus the same period a year earlier. The increase in revenue came together like this: volume was responsible for 4%, pricing added 1%, and currency chipped in another 1%. On the negative side, the product line transfer into the Tools & Outdoor segment that we already mentioned created a 3% drag. Over in aerospace, things kept going really well — organic growth came in above 25%, driven by strong need for fasteners and fittings, and that unit kept up its outstanding top line gains both year over year and sequentially, with a healthy backlog behind it. Automotive posted organic growth in the low single digits, which shows the automotive market held up better than we'd expected during the quarter. For general industrial fasteners, organic revenue fell by a mid-single-digit amount. Engineered Fastening's adjusted segment margin came to 12.8%, a figure that mirrors higher production costs set against a difficult comparison from the prior year. Looking sequentially, adjusted segment margin rose 200 basis points from what we saw in the second quarter, which mirrors the gains in the automotive market. All in all, our teams turned in results that matched expectations, thanks to disciplined execution, focused pricing moves, and ongoing work to optimize our supply chain — a strong quarter in a challenging setting, with a lot of credit owed to the worldwide Stanley Black & Decker team. Collectively, we're all still driving real progress on the things we can actually control.

Chris Nelson executive
#4

I want to express my appreciation to our colleagues everywhere for the effort you put in and the commitment you show daily toward the people we serve and those who use our products. At this point, I'll hand things over to Pat, who will walk through the headway we made against our most important performance measures and lay out what we're now assuming for 2025 planning.

Pat Hallinan executive
#5

Thanks, Chris, and welcome everyone to this morning's call. I'll begin with a closer examination of how we performed on gross margin. During Q3, we posted adjusted gross margin of 31.6%, which is 110 basis points higher than what we recorded in the comparable quarter a year ago. Margin expansion has become a top priority across the whole company, and by rolling out focused initiatives, we've secured real improvement in margins versus a year ago. Those gains largely came from our disciplined approach to pricing along with better efficiencies in the supply chain. This quarter, our targeted initiatives made a meaningful contribution to results, although tariffs, lower volume and inflation partly offset those benefits. The direction of our gross margin stays solidly upward, which speaks to the organization's unwavering commitment to operational excellence. Proof of how dedicated and capable the team is can be seen in the fact that despite sizable tariff costs that began affecting our P&L in April, we experienced just one quarter where gross margin went backward. Even amid wider market swings, our teams have shown outstanding agility and focus, making sure we keep growing profitably even when conditions are uncertain. Now, as we look ahead to 2026, we anticipate a substantial opportunity for meaningful adjusted gross margin expansion over 2025 on a year-over-year basis, even should macroeconomic conditions fail to improve in any material way; our target remains an adjusted gross margin of 35-plus percent. As a team, we keep pushing to reach that target, or come very close to it, by Q4 of 2026. Let me shift to our worldwide cost reduction transformation program. Through Q3, we kept up considerable momentum, generating roughly $120 million of incremental pretax run rate cost savings; these efforts play a vital role in backing the margin improvement path we're on, which in turn makes sustained investment in growth possible. From when it began in mid-2022, this program has produced around $1.9 billion in pretax run rate cost savings, which highlights both the size and the effectiveness of our transformation agenda. We remain on track to hit our targets, with steady progress registered across every workstream; we anticipate the transformation program will deliver $500 million of cost savings in 2025 and $2 billion in total by the close of this year, which marks the successful completion of this initiative's original cost reduction goals. One central piece of our strategy for mitigating tariffs and lifting gross margin involves cutting down how much U.S. supply is sourced from China. We're achieving significant headway here and moving methodically down a well-defined path. Cordless production has been shifted quickly out of China into Mexico, and at the same time we've been swiftly raising the amount of USMCA-compliant production taking place in Mexico. We anticipate continuing to hit the reductions we're targeting for U.S. goods sourced from China. Our plan is to bring the 2024 level, when about 15% of our U.S. supply came from China, down to under 10% by the midpoint of 2026 and under 5% by the close of 2026; hitting these milestones matters greatly for reaching our gross margin objectives and for strengthening the resilience of our supply chain. Through making our supply chain more varied, our company is positioned more effectively to handle shifting trade conditions, react to regulatory adjustments, and achieve operational excellence. Achieving operational excellence through platforming, lean manufacturing, and additional fixed cost cuts will stay a leading priority past 2025. We stay confident in our capacity to maintain positive momentum as we enter 2026, and that our dedication to disciplined execution will produce lasting productivity improvements and cost leadership. Yearly productivity gains will act as the motor to finance investments that propel top line growth and advance our competitive standing. The steps we are taking now are essential to backing continued margin enhancement and reaching our long-term adjusted gross margin goal of 35-plus percent; now let's examine our planning assumption for 2025. Adjusted earnings per share should come in at roughly $4.55, which is $0.10 lower than the estimate from the prior quarter. This adjustment mirrors greater-than-expected production costs stemming from tariff-related volume weakness and supply chain modifications. We will rectify these matters during the fourth quarter to help enable the achievement of targeted 2026 gross margin improvement, rendering these headwinds temporary components of our tariff mitigation response plan. Our earnings outlook for the year incorporates a revised GAAP earnings per share range of $2.55 to $2.70; this change from the earlier planning assumption is mainly due to a $169 million pretax noncash asset impairment charge taken in the third quarter. Let me offer clarity on these impairment charges. First, updates to our brand prioritization strategy to direct more company resources and investment toward DEWALT, CRAFTSMAN, and STANLEY, which we have talked about many times during the past year, affected 3 trade names, specifically LENOX, Troy-Bilt, and IRWIN. This accounted for the vast majority of the impairment charges. Moving forward, we intend to concentrate on marketing these specialty brands to particular product categories and regions where they possess their most significant market positions and value to end users. Second, we've made a strategic choice to exit most of our noncore legacy corporate venture investments, which led to the write-down of certain minority investments in the quarter. Total pretax non-GAAP adjustments for the year are projected to range between $370 million to $400 million, primarily tied to the supply chain transformation, noncash asset impairment charges, and other cost actions that will benefit SG&A; we expect roughly 45% of these adjustments to be noncash since they relate to the previously mentioned trade name impairment charges and write-down of certain minority investments connected to legacy corporate ventures. Now concerning the revenue outlook. For the full year, we expect total company sales to be flat to down 1% versus 2024, most likely at the lower end of this range. Organic revenue is anticipated to decline in the same zone as total company, and price realization is expected to be offset by anticipated volume declines. We anticipate currency will add 1 percentage point on the positive side, though that gain gets offset by the comparable impact in the first quarter tied to the infrastructure divestiture. Our expectation is that adjusted gross margins stay resilient. And given where our current trajectory sits, we expect to come in near 31% adjusted gross margin across the whole of 2025. In order to produce profit and cash amid a dynamic environment, we'll keep pushing forward on tariff mitigation and gross margin expansion efforts, and we'll handle SG&A with care relative to anticipated volumes while safeguarding growth investments. Turning to the fourth quarter, we expect adjusted gross margin to keep expanding year over year to approximately 33%, give or take 50 basis points. Supporting this outlook are our second round of price increases, continuing gains from our supply chain transformation and further tariff mitigation steps, with some pressure coming from tariff-related production costs. For SG&A as a percentage of sales, both for the year and for the fourth quarter, the plan is 21% in a fraction, marked by prudent cost management while protecting strategic growth investments; we stay dedicated to putting money into high-growth, high-return opportunities, with more than $100 million reinvested during 2025 to drive market activation, strengthen our brands and support commercial expansion, all while bringing SG&A costs down in other areas of the business.

Pat Hallinan executive
#6

Looking at both the entire year and the fourth quarter, we also anticipate adjusted EBITDA margins will widen compared with a year earlier, driven by gains in gross margin along with the cost measures we're putting in place. Moving on to our segments. Within Tools & Outdoor, we project organic revenue for the full year will fall by roughly 1 percentage point. For Engineered Fastening, we expect organic revenue growth in the low single digits, with aerospace leading the way. Now on to cash generation; during the third quarter we produced $155 million of free cash flow, which moves us toward our 2025 full-year free cash flow goal of $600 million — that figure is unchanged from a quarter ago. As we move through the final quarter of 2025 and into 2026, we stay dedicated to careful inventory management, keeping customer order fulfillment a leading priority, even while we actively manage shifting supply chain conditions and possible changes in the outside market landscape. Our projection for capital expenditure in 2025 is still about $300 million, matching what we assumed in earlier planning. Regarding capital allocation, our intention is to direct free cash flow beyond our dividend toward paying down debt in the near term. Keeping a strong, resilient balance sheet ranks as a leading priority, and we are dedicated to reaching a net debt to adjusted EBITDA ratio at or below 2.5x. Our approach to hitting this leverage goal will be backed by proceeds from an asset sale that we aim to complete within the coming 12 months. We still expect our adjusted tax rate to come in at roughly 15% for the year. Other modeling assumptions for 2025, as presented here, broadly align with what we shared with you in July; for the fourth quarter, we expect organic revenue to be flat, since price increases get offset by volume pressure coming from a soft consumer DIY market. During the fourth quarter, we anticipate ongoing pretax earnings growth and working capital efficiencies, helped by the seasonal drawdown of receivables and a slight inventory reduction, to hit our free cash flow target. Adjusted earnings per share for the fourth quarter should come in at about $1.29. We stay optimistic regarding the long-term growth prospects for our industry and our business. The targets we set out for you a year ago at our Capital Markets Day continue to suit the business and our focus, though pushed back by about a year because of the effect of higher tariffs. In the near term, we expect market conditions to stay dynamic and difficult; we will keep responding decisively through targeted supply chain and SG&A adjustments, highlighting our dedication to serving the needs of our end users and customers while delivering improved financial results. We remain focused on boosting the company's long-term earnings power and reinforcing the balance sheet. Thank you. And I'll now hand the call back to Chris.

Chris Nelson executive
#7

Thanks, Pat. Every day, we're making our operations more resilient. With a disciplined, data-driven mindset, we're able to handle shifting market conditions, capture new opportunities, and reliably deliver value to those with a stake in our success. As Pat described, we keep proactively managing the factors we can control, which helps us reach and build on our objectives. Given how much global uncertainty there is, we see our 2025 outlook as balanced. We know the operating environment is tough. And we're concentrating on creating substantial value from our strong brands and businesses, so we can drive long-term revenue growth, margin expansion, cash generation, and shareholder return. We stay committed to pursuing the targets we laid out at our November 2024 Capital Markets Day. With our talented team's shared dedication and a steadfast commitment to backing our customers and end users, I'm confident Stanley Black & Decker will keep setting new standards for excellence in the years ahead. Michael, we're ready for Q&A now.

Michael Wherley executive
#8

Thank you, Chris. Shannon, you can begin the Q&A now.

Tim Wojs analyst
#9

Regarding volumes, what I'd like to know is how they came in versus what you had anticipated. Also, could you separate the volume into what got affected by tariffs versus the elasticity you observed during the quarter? Then, looking ahead over the coming quarters when it comes to price and volume, should we expect that roughly one-for-one trade-off to persist between the two? Or might there be some fundamental strengthening in how that relationship plays out?

Chris Nelson executive
#10

Tim, it's Chris here. Appreciate you being with us. Yeah, I'd describe our volumes as pretty much matching what we had expected; the quarter got off to a solid start, and things tapered somewhat toward the finish of 3Q; however, in our view that was largely attributable to what we'd brought up in prior discussions, a promotional window that wasn't standard; and heading into Q4, we'll be returning to a promotional calendar that's more typical. We're genuinely enthusiastic about the promotions lined up for the holiday season, which, as you're aware, matters a great deal to our business. My sense is the environment should stay comparable through Q4, after which we'll keep watching and making adjustments as we move into the new year in 2026. That said, even though the environment, as Pat definitely pointed out, is challenging, it's been fairly steady, and we're eager about the promotional calendar in place to wrap up the year, and keeping an eye on things will be crucial for us.

Julian Mitchell analyst
#11

Perhaps my question could focus on examining the profit levers in greater depth. So my understanding is that for Q4, you anticipate operating profit rising by a few tens of millions of dollars compared to the previous quarter, while sales remain relatively flat. Is that entirely driven by the additional price hike? And when you look ahead to 2026, which is now just 8 weeks off, it appears volumes won't provide much support given how this year is ending. So could you help us grasp which gross margin drivers excite you most for 2026?

Pat Hallinan executive
#12

Thank you, Julian. Sure. So the operating profit growth in Q4 will really come from 2 levers. We definitely anticipate ongoing gains when it comes to gross margin. For the fourth quarter, we're expecting gross margin near 33%, it might fluctuate by plus or minus 50 basis points, but that's definitely our goal and what we're monitoring toward. And then something we've discussed throughout the year is carefully handling SG&A costs in light of the volume situation, while continuing to safeguard investments in growth. So even as we're still aiming for roughly $100 million in growth investments, sort of in other areas of the company, we're actually cutting SG&A costs substantially, nearly by a matching amount this year in our full year '25 income statement. And on a year-over-year comparison, we'll likely see SG&A lower by around $40 million against the same quarter a year ago; so the profit growth in Q4 combines gross margin gains and SG&A cuts. Those are the main factors in a quarter where, on the whole, our net sales figure is basically unchanged. So that's the source of this year's result. I'd say as we move into next year regarding gross margin, we remain, as a company, highly committed to our long-term goal of 35-plus percent; and daily, we strive to figure out how to achieve that by Q4 of next year, and that continues to be our aim; we'll reach it or come close while working on it, provided the macro conditions stay roughly where they are or improve. Clearly, should a major recession occur, we might have to reconsider that. And the levers we'll be using next year, we'll continue pursuing strategic sourcing, ongoing improvements within plants, platforming will begin to take on a larger role, and we still face some choices regarding facilities. So every one of those levers remains relevant for '26 and afterward. And they will each contribute very substantially. As we noted, when we revised our Q4 outlook for this year, we entered the second half carrying a preference for maintaining a bit of spare capacity at our facilities — that way we could respond if elasticity turned out to be stronger, and also handle certain worldwide shifts in supply; likewise, we'll need to make adjustments for those kinds of expenses as well when we move into the opening months of '26.

Nigel Coe analyst
#13

And Chris, congrats — I'm on the phone as we speak, I suppose, but congratulations. Perhaps — I believe you brought up launching yet another price hike during the quarter. So could you sort of mark-to-market where you anticipate price might land going into Q4? And perhaps give us a fast mark-to-market on — I realize it shifts quite a bit, but on tariff inflation, what's your read at this moment? And are you included in that 10% sentinel tariff cut? And does that affect Q4?

Chris Nelson executive
#14

Much appreciated, Nigel. Good to hear from you. I'll kick things off, and I'll have Pat finish up; but I'd say the price increase, that second one, as I noted in my remarks, is underway at present, and it will fall within that low single-digit territory we discussed in earlier calls, and we're on schedule for that. And we're collaborating with every one of our channel partners in a constructive way to put that in place, since our shared objective is ensuring we do all we possibly can to lessen whatever strain our end users might face. And so our true focus is on pushing our production relocations and mitigation to cut back our dependence on China imports for U.S. consumption. And we've made considerable headway on that front. We're still on track to get under 10% before the year closes and under — at or under 5% before 2026 ends; we're progressing nicely there; and that's genuinely the priority. So regarding your second question, which concerns tariff exposure given the most recent data, there's really no meaningful effect. It remains roughly in the same zone given the shifts that have arrived in 232s, paired with the China reduction, it has more or less balanced out. So we're sitting in that identical range. And regarding what that implies for our mitigation work, we were — essentially, as I said before, we intended in the near future to be mostly out of China as a supply source for the U.S; so it truly has negligible effect on our medium- to long-term plans there; so I'm not sure, Pat, whether you'd like to add anything there?

Pat Hallinan executive
#15

Yes, I think you covered almost everything there, Chris. What I'd do is just go back over a few of the things Chris mentioned: our end goal, basically starting around the close of 2026, is that under 5% of U.S. COGS would be sourced from China. That's really what drove the whole way we've approached mitigation, across both supply chain changes and pricing. So given that, the 10% reduction — taking 10 percentage points off the China tariffs — doesn't actually change that outcome much at all. You asked about a benefit in the fourth quarter. It's probably in the range of very low single-digit millions, because it's only one quarter that's affected and then basically you only get the LIFO portion of it; so for Q4, that number is quite small. It gives a slight lift, probably somewhere between 5% and 10% for each of the first 2 quarters of next year, or roughly that, but longer term it's not a game changer. Sure, any relief helps, but this isn't a big item — think $10 million versus $5 million at most.

Chris Snyder analyst
#16

I'd like to ask about the Tools & Outdoor revenue line. For pricing this quarter, I believe you mentioned 5%, yet my recollection of what was discussed during the Q2 conference call was high single-digit pricing. Perhaps that remark applied more to the back half than to Q3, so any clarification on that would be welcome. Also, Tools & Outdoor is guiding toward an improved Q4 figure; it looks like possibly flat organic. Q3 came in at negative 2%. And with a tougher comparison now facing us in Q4, could you explain the reason that 2-year stack is expected to improve? I get that price is flowing through, but you'd think the one-for-one offset would mean lower volumes soak that up.

Pat Hallinan executive
#17

Yeah. So Chris, the way pricing works can be confusing, since it's clearly just one piece of everything we're doing to counter tariffs. And on top of that, there are plenty of supply changes. But for the most part, this is a United States Tools & Outdoor situation. What that means is we're applying meaningful price increases across 60% of the business rather than the whole 100%. So your read is right that once we finish the second round of price increases, our pricing will be where it needs to be — though even what we've already put through sits in the high single-digit range. Across our U.S. product lines, it will likely land somewhere in the high single digits, or perhaps even the low double digits, depending on which SKU you're considering. That said, if you essentially take 60% of that figure, you arrive at a mid-single-digit perspective globally when it comes to pricing — both for T&O worldwide and for Stanley Black & Decker as a whole worldwide. So, looking at the outlook and planning assumption information we've been citing, on an enterprise-wide basis we've anticipated mid-single digits, while U.S. T&O has been high single digits or higher. And what we're observing matches that exactly. It takes a great deal of effort from our team, and a great deal of effort alongside our channel partners, to handle this carefully, yet we are achieving the price we anticipated. As you observed in the third quarter pricing reconciliation, it came to 5 percentage points, which falls squarely within the range we had expected. So yes, we are implementing another round of price increases during Q4, and at the same time we'll return to a promotional rhythm that's closer to what we'd consider typical. As a result, my expectation is that the Q4 reconciliation lands in a comparable range—it could drift somewhat above or below that 5% figure, depending on how promotions are mixed and how sales perform relatively. When it comes to how growth unfolds across the quarter and across the year, looking at the whole company for the entire year, we anticipate organic net sales on an enterprise-wide basis will come in somewhere between flat and a 1% decline, and it's probably more probable that we end up nearer the bottom of that span. Regarding T&O this quarter, our expectation is essentially level to a decline of roughly 1%, and once more, likely near the bottom of that span. So what you'll end up with is an enterprise where T&O for both the quarter and the full year drops somewhere in the range of 0 — flat to negative 1%, nearer to that negative 1%, while SEF rises by around 2 percentage points across the year, and that is what will move the total enterprise toward the enterprise expectation.

Michael Rehaut analyst
#18

I'd like to zero in — and I'm not asking you to give guidance for next year — on a few moves you've made over the last 12 months, and what effect those could have on '26. Specifically, first, the carryover effect, sort of viewed on an annualized basis, from the cost cuts you expect to complete — the $2 billion by the time this year ends. On a fully annualized basis, what would that contribute to 2026? And also the supply chain shift, with the reduction in the China footprint — as that declines across the year, I'd assume there'd be some kind of cost benefit too.

Pat Hallinan executive
#19

Yes, Mike, that's a reasonable question. Before we'd be comfortable discussing '26 guidance, we definitely want to see how this quarter unfolds in terms of consumer confidence, consumer engagement and volume. But the anchors to '26, regardless of the macro, will be driving gross margin improvement and handling SG&A prudently. So we're building game plans for '26 that put us at roughly 35-ish percent in Q4; we'll close out this full year at about a 31-ish percent level. For the full year '26, we'll clearly be aiming at something right in the middle of those 2 figures, 31% and 35%. And as I said in response to the questions Julian raised, every lever remains available; on gross productivity next year we'll need to deliver somewhere between $350 million and $400 million. That's roughly our focal point, once again, no matter the macro, so we keep advancing along that gross margin path; then we'll pursue a mitigation path to remove $200 million to $300 million of tariff expense from the system — either by moving product out of China and/or by raising USMCA compliance; those are the areas we're focused on; those are levers we're pulling, and we'll keep managing SG&A in that 21-ish percent range, again, striving to fund growth investments while tightening the cost structure in other places.

Adam Baumgarten analyst
#20

I'm just wondering, in your view, how did our volumes for power and hand tools in North America stack up against the market during the third quarter?

Chris Nelson executive
#21

Adam, my sense is that we're pretty much at market level. A few points I'd make. DEWALT, as we know, keeps expanding on a year-over-year basis in absolute terms, and my belief is that it would be setting the pace for the market. With our other 2 core brands, we've been observing additional indications of advancement in holding at market levels; and the key thing to grasp, I think, is that over the short term, given how much change has occurred through differing reactions to tariff policy, to pricing, and to promotional calendars, there has simply been — the market has seen a great deal of volatility. We'll continue watching and see how matters develop, both as we close out this year and as we move into the following year, into 2026. That said, I'd say we've been pretty much at the level we believe the market would be, and I'd say, with our DEWALT brand, we're surpassing what we believe the market is.

Jonathan Matuszewski analyst
#22

Housing policy under the present administration involves plenty of shifting parts. I was hoping you might speak to the way you view Stanley Black & Decker as someone who could gain from certain of these proposals aimed at spurring and freeing up inactive housing inventory down the road.

Chris Nelson executive
#23

Much appreciated, Jonathan. Good to hear from you. I'll begin simply by noting that we recognize — and we'd put it this way — that at this moment we perceive no genuine catalyst in the near term for that market. So our attention goes to guaranteeing we manage the things within our control; what we're doing has us enthusiastic. The strides we're making in expanding margins and broadening our product lines have us enthusiastic; and we'll keep pushing in that direction. And to put it plainly, we will keep getting better through the steps we take regarding the items within our control; and that is where our focus sits. And I'd say the advancement we've achieved has me enthusiastic, and we anticipate carrying that forward along those same lines as we move into 2026. When it comes to any unlocking of momentum in housing, be it new construction or repair and remodel, we absolutely think we sit in a very strong position to gain from it; we absolutely cater to those markets and those trades with extremely high share positions, and we've been treating this period of what I'd describe as somewhat more of a pullback in that market as a chance to put heavy investment in to guarantee we're present with those end users, with those contractors and with that industry, forging relationships and forging innovation so that when it does unlock, we'll be there to absolutely gain from it and likely capture more than our fair share.

Joe O'Dea analyst
#24

About the exposure you have to supply in China and the U.S., the detail you gave on what you expect that path to look like was helpful. Any views on USMCA compliance, and where you currently are along that road? And on the fourth-quarter pricing you described as still somewhat in process, how much of the quarter do you expect that price to move through the P&L — the additional price that's being worked through right now?

Chris Nelson executive
#25

USMCA I'll take first, and then Pat can handle the pricing question. As for USMCA, I think on our last call I noted that meaningful headway is being made. It's a big piece of what we're doing to mitigate. From day one, we've laid out how we handle tariffs: we back our customers, we soften the impact on our operations, we adjust pricing when needed, and we keep talking with the administration. Going into 2026, we set prices based on what we expected our final mitigation picture to be. So everyone's fully engaged in getting us to that point, since it's central to both our mitigation efforts and our margin path. On the USMCA front, things are moving forward, and we don't see any structural barriers preventing us from reaching roughly the typical level for industrial companies similar to ours. We expect to get there over the medium term. So the momentum is strong, and we view this as a solid chance to keep supplying our end users with the products they require at price points they're able to pay.

Pat Hallinan executive
#26

Absolutely. And Joe, when it comes to pricing in the fourth quarter, a good portion of those conversations with channel partners are already done, and those price changes are beginning to be implemented. The rest of them, we'd anticipate wrapping up in the first part of November. So the way I tend to look at it is that, for the bulk of the period, you're talking about 2 of the 3 months in the quarter, and we believe we're on track with that. And given all the factors we're juggling during this quarter as part of our planning assumption, we're at ease with where things stand on that side.

Joe Ritchie analyst
#27

The sole thing I want to ask about at this moment really concerns inventory levels; it appears you've brought your inventories down across the last year and on a sequential basis too. From an inventory standpoint, how much higher do you figure you still are? Also, what reduction are you expecting during 2026?

Pat Hallinan executive
#28

Yeah. Those are good questions, Joe. What I'd do is bring up cash first and then return to inventory, since we remain in delevering mode and are quite focused on producing cash; clearly, we have work ahead of us this quarter. So we anticipate that the gross margin gain and the SG&A oversight I mentioned before in the Q&A will fuel profit expansion during the fourth quarter. After that, we'll be aiming for more than $500 million of working capital reduction in the quarter. That covers both receivables and inventory. I'd say throughout this year, or at least up to this point in it, we're carrying somewhat more inventory than we'd prefer, though that makes sense given all the supply chain moves underway. Clearly, we're taking 15 percentage points of our U.S. COGS and shifting them outside China, which winds up creating some inventory slack within the system, and that's among our challenges. As for next year, we're likely aiming for at least $200 million. We'd want to do better than that, since I believe our longer-term opportunity, at a level at this revenue stage, likely comes close to $1 billion of working capital reduction. That isn't merely some incremental thing; it's about leveraging platforming and enhancing how we handle planning along with a whole host of other items that drive inventory. Still, I believe that's the opportunity sitting in front of us. Yet given that some tariff mitigation will eat up the first half to 2/3 of next year, a target within the $200 million to $300 million range, nearer to $200 million for next year, is probably more suitable.

Michael Wherley executive
#29

Thanks, Shannon. Once more, we appreciate all of you taking the time to join us on today's call. Should anything else come up, feel free to contact me personally. Enjoy the rest of your day.

Operator operator
#30

This concludes today's conference call. Thank you for your participation. You may now disconnect.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Stanley Black & Decker, Inc. transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to Stanley Black & Decker, Inc. earnings transcripts and 132,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.