Home / Transcripts / Stanley Black & Decker, Inc. (SWK) · April 29, 2026

Stanley Black & Decker, Inc. (SWK) Earnings Call Transcript & Summary

April 29, 2026

New York Stock Exchange US Industrials Machinery earnings 59 min

What were the key takeaways from Stanley Black & Decker, Inc.'s April 29, 2026 earnings call?

In the first quarter of 2026, Stanley Black & Decker (SWK:US) reported revenue of $3.3 billion, reflecting a 3% increase overall but flat organic growth. Adjusted earnings per share (EPS) of $0.80 exceeded the high end of guidance by $0.20, indicating strong operational performance. The company maintained its full-year guidance for adjusted EPS in the range of $4.90 to $5.70, while expecting organic revenue growth in the low single digits, slightly lower than previous expectations due to the removal of CAM's contribution in Q2.

What topics did Stanley Black & Decker, Inc. cover?

What were Stanley Black & Decker, Inc.'s April 29, 2026 results?

Overall, Stanley Black & Decker's first quarter results demonstrate solid operational execution and a commitment to shareholder value creation through strategic capital allocation. Investors should monitor the company's ability to navigate competitive pressures and inflationary costs while leveraging growth opportunities in the outdoor segment and professional channels.

Earnings Call Speaker Segments

Michael Wherley executive
#1

Good morning, everyone, and thanks for joining us to discuss what we delivered in the first quarter. On the line with us are Chris Nelson, who serves as our President and CEO, as well as Patrick Hallinan, our Executive Vice President, CFO, and Chief Administrative Officer. Earlier today we issued our earnings release, and you can locate that, together with a supplemental presentation that we'll be referencing, in the investor relations area of our website. A webcast replay will also be made available beginning at roughly 11:00 A.M. Eastern Time. This morning, Chris and Pat will take you through the results for our first quarter and give you our revised outlook for 2026, after which we'll open things up for questions. During this call, certain statements we make will be forward-looking, reflecting how we see things right now. Comments of this kind rest on forecasts about what will happen later, and those forecasts might turn out wrong, so they carry exposure to risk and uncertainty. Because of that, what actually happens could end up differing substantially from anything we say today that looks ahead. Please see the cautionary language included in the 8-K that went out alongside our press release, as well as in our latest filings under the 34 Act; note too that non-GAAP financial measures could come up while we speak. Where you need the matching GAAP figures and further details, look at the appendix in the supplemental presentation and the related press release, both of which you can find on our website. At this point I'll pass it to Chris Nelson, who serves as our President and CEO.

Chris Nelson executive
#2

Thanks, Michael, and I appreciate everyone being here today. I'm happy to share that Stanley Black & Decker has gotten off to a strong beginning this year, beating what we had anticipated on both revenue and profit in Q1 while showing ongoing advancement against our strategic priorities; our confidence remains high in both the strategy and the team's capacity to keep executing and producing results. In Q1, sales rose 3% in total and were even organically; that came in above what we had projected, largely because of a well-executed preseason for outdoor products. Our adjusted gross margin rate came to 30.2%, a decline of 20 basis points versus the prior year, which is basically flat. Adjusted EBITDA margin reached 9.2%, 50 basis points lower than a year ago, a touch better than the planning assumptions we had for the period. Adjusted earnings per share came in at $0.80, which is $0.20 above the top end of our Q1 guidance range of $0.55-$0.60. Pat will go into more detail on that later in this call. Also, on April 6, we reported that the previously announced deal to divest our aerospace fasteners business had closed successfully; this portfolio change aligns with our strategy of concentrating on our core business and our dedication to boosting shareholder value. Nearly all of the roughly $1.6 billion in net proceeds has already gone toward paying down debt. We now have a stronger balance sheet and have gained the flexibility to put capital to work speeding up shareholder value creation; we anticipate that our capital allocation approach will lean toward share repurchases, which the board has approved. Moving to our Q1 operating performance by segment, I'll begin with Tools & Outdoor. Q1 revenue totaled roughly $3.3 billion, an increase of 2% versus last year. Organic revenue fell 1% as a 4% gain from targeted pricing actions was outweighed by 5% of volume headwinds. Currency provided a 3% tailwind during the quarter. As we mentioned in February, our base case assumed that top-line volatility, particularly in the North American retail channel, would continue through at least Q1. In line with what we expected, competitors kept taking price, and we refined how we approached promotions for certain products. As anticipated, our Q1 results showed a volume decline, mainly due to softer retail activity in North America. That was partly offset by robust initial sell-in for outdoor products as we head toward the peak selling season. International growth in prioritized investment markets including Eastern Europe, the U.K., and Latin America was an encouraging result. In addition, higher sales from professional end user demand in the U.S. commercial and industrial channel suggest our growth investments are gaining momentum in the market. Tools & Outdoor Q1 adjusted segment margin was 8.7%, in line with our plan. Now, for more context on the top line performance by product line in Q1. Within our Power tools category, organic sales fell 2%, while hand tools, accessories, and storage saw a 3% organic drop — both reflecting the same underlying dynamics affecting the wider segment. Outdoor posted a 1% organic gain, helped by promising preseason demand ahead of spring 2026, especially for ride-on and zero-turn mower products. Although the outdoor selling period has only just begun, what we've seen so far speaks to solid work from our team, including strong order fulfillment. Now looking at Tools & Outdoor results geographically: in North America, organic revenue was down 2%, mirroring the patterns we covered for the segment as a whole. Our U.S. commercial and industrial channel achieved high single-digit organic growth, showing a robust payoff from the focused investments we've made in brand activation aimed at the professional end user. I'll come back to that shortly. Point of sale results during the quarter matched what we anticipated and were largely in line with the home improvement consumer credit card data that's been reported. Over in Europe, organic revenue rose 1%. Gains in markets we've prioritized for investment, such as the United Kingdom and Eastern Europe, were partly canceled out by weaker conditions elsewhere in the region. Rest of world organic revenue came in flat, as double-digit expansion in Latin America was offset by areas of softness across Asia and the Middle East. Now shifting to Engineered Fastening. Q1 revenue rose 10% as reported and 7% organically. That growth broke down into a 6% gain from volume, 1% from higher pricing, and a 3% benefit from currency. The Aerospace Business kept up its strong momentum, posting 31% organic growth for the quarter. The Automotive Business achieved 4% organic growth, beating the market, fueled by robust North America demand and strength in global fastener systems serving auto OEMs. General Industrial Fasteners organic revenue was down low single digits. Engineered Fastening's adjusted segment margin reached 12% in the quarter. The 190 basis point year-over-year improvement came mainly from better aerospace profitability along with favorable automotive volume and mix. Thanks to disciplined execution, both Tools & Outdoor and Engineered Fastening generated reported and organic revenue that exceeded our expectations even against a difficult operating backdrop. Segment margin rates likewise came in as expected for the quarter, supported by disciplined execution, operational cost improvements, and targeted refinements to promotional strategies. We see these results as proof of the momentum we're generating; we hold firm conviction in our strategy and are confident we're taking the steps needed to secure sustainable growth and shareholder value creation going forward. I want to thank our team for keeping their customer-centric mindset and for pushing forward our vision of building a world-class branded industrial company. Three core strategic imperatives anchor our ambition: purposeful brand activation, operational excellence, and accelerated innovation. I'd like to offer a few updates on how these efforts are taking hold. Beginning with DEWALT, you've often heard us discuss safety as a central end user priority and a key value proposition behind the products we make. The PERFORM & PROTECT range we offer is built so that users get features guarding against breathing in dust, losing control of torque, and vibration from tools, all while keeping the level of performance that professionals who use these products expect. More than 200 PERFORM & PROTECT options exist under DEWALT, drawing in professional end users and turning them into people who use the DEWALT platform. Solutions aimed at these kinds of end users, paired with the money we keep putting into growing our field service and sales teams, helped drive the robust commercial and industrial results this quarter — among them professional contractors switching over entirely from what competitors offer to DEWALT cordless solutions, plus lead construction contractors equipping sizable new project job sites with DEWALT. Also, during the prior quarter, we said the Stanley brand was set up to get back to growth in 2026. I'm happy to report that the investments we've targeted are backing new listings, mostly from the first stage of our product refresh along with introductions of new products. Green shoots are appearing, and we're on track to bring the Stanley brand back to growth by the middle of the year. Our bigger field team and the trade specialists who serve the professional end user are generating real traction with our channel partners around the world, creating demand as we expand alongside them. I'll hand the call over now to Pat, who will talk through how we're doing on several key performance metrics and lay out our guidance for 2026.

Patrick Hallinan executive
#3

Thanks, Chris, and welcome everyone for joining us this morning. Prior to getting into the guidance, I'd like to begin by giving a little additional color on how we beat on adjusted EPS during the first quarter, which, as Chris mentioned, came in $0.20 higher than the top end of the range we guided to back in February. Roughly half of that beat was driven by above the line operating outperformance, led by Outdoor. Everything else that drove the beat sat below the line, and for the most part those items left our full-year expectations for them essentially untouched. Consider the tax rate we had projected for the first quarter: we'd put it at 30%, yet it landed at 26%, which came down to when a discrete tax item fell. We still see the full year tax rate at 19%, with no change to that view. With that said, let me walk you through the refreshed guidance along with the remaining assumptions for 2026. A handful of important updates are baked into this guidance that you should know about. The first is that the CAM deal closed near the start of the window we had anticipated. What that meant in practice is that we removed the second quarter contribution we had expected from CAM out of our guidance. That one-time adjustment from the quarter brings down the pre-tax profit we anticipate for our engineered fastening segment by about $15 million. At the same time, it lowers interest expense in the second quarter by an approximately comparable figure. As a result, there's basically no effect on our adjusted EPS guidance for either the second quarter or the full year. Then there's the second item: since our previous earnings call, several changes to tariff policy have taken place, and those prompted fresh assessments and assumptions on our part. Taking everything together, we anticipate that these tariff policy shifts, along with the revised tariff assumptions we've made, will add up to a net tailwind on a gross basis for us this year, measured against the assumptions we were working with when the year began. Near term, we're in a temporary stretch of lower tariffs because the replacement Section 122 tariffs sit below the former IEEPA tariffs. Our base case assumes new Section 301 tariffs get introduced at a level matching the old IEEPA tariffs, which would leave our underlying tariff costs by August virtually identical to where they stood before the Supreme Court ruling in February. That's our current expectation, though it could change as policy gets finalized, and we'll update our assumptions as appropriate. Third, inflationary cost pressures in resins and freight have appeared since the conflict in the Middle East began. Finally, over the past few months, we've seen significant price increases in battery metals and tungsten, which we use on the tips of our saw blades and drill bits to make them more durable and resistant to heat. In our view, the total effect of these cost pressures approximately cancels out the gain from the tariff tailwind for the year. Now turning to the guidance figures themselves. As we look toward 2026, we expect adjusted earnings per share to land somewhere between $4.90 and $5.70, representing 13% growth at the midpoint and remaining consistent with the adjusted earnings guidance we gave initially. At the same time, we now foresee total company revenue coming in roughly flat versus the prior year — a touch below what we previously guided, driven by taking CAM out of the second quarter expectations. Organic revenue is still anticipated to increase by a low single-digit percentage compared with the prior year. That view speaks to how focused we are on pivoting toward growth and how confident we feel about capturing share opportunities throughout our key markets. On foreign exchange, our expectation remains a full-year benefit of 50 to 100 basis points, with the bulk of that arriving during the first half. Turning to gross margin: we anticipate adjusted gross margins expanding roughly 150 basis points versus a year ago, matching our earlier guidance. Several factors underpin this — top-line growth, pricing, our continued work on tariff mitigation, and steady operational gains. We feel we are solidly on course to hit that target, and I'll cover more on the upcoming slide. During 2026, we intend to keep funding growth investments so we can push our strong innovation pipeline further ahead and energize market activation, all aimed at strengthening brand health and speeding up organic growth. As a percentage of sales, SG&A should stay near 22%. Our approach to SG&A will remain disciplined, directing capital toward strategic investments that set the business up for long-term growth. Free cash flow should land somewhere between $500 million and $700 million, inclusive of the taxes and fees we project in connection with the CAM divestiture. If you set those payments aside, free cash flow should come in between $700 million and $900 million, in line with the guidance we originally gave. Delivering that free cash flow will depend on a disciplined, efficient approach to working capital management — bringing inventory back toward pre-pandemic norms while staying mindful of our continuing tariff mitigation and footprint optimization efforts. We were glad to show progress on lowering inventory during the first quarter. Turning to our business units: for each, our plan combines growth in organic revenue with an improvement in segment margin. Tools & Outdoor ought to deliver low single-digit organic growth during 2026, driven by picking up share in a market we anticipate will be about flat. Looking at the second quarter, organic revenue is expected to increase in the low single-digit range, since our recent commercial actions continue to generate momentum and we start to move past the promotional upheaval that began in Q2 of last year. Across the rest of 2026, we likewise expect sales trends to improve, reflecting new product introductions and commercial programs, with a focus on outperforming the market. On adjusted segment margin, we expect an increase over last year. The main drivers are the pricing steps we've kept in place, efforts to offset tariffs, strong execution on operations, and tight control of SG&A. In engineered fastening, our forecast is for organic growth somewhere between low single digits and mid single digits — slightly softer than our earlier outlook — since CAM now adds only 1 quarter rather than the 2 quarters we had baked into the original guidance. For adjusted segment margin, we look for a gain versus a year ago, driven largely by continued operational gains and the benefit of volume leverage. Turning to the remaining pieces of our 2026 assumptions: inside our GAAP earnings guidance of $4.15-$5.35, pre-tax non-GAAP adjustments fall in a range of $10 million-$65 million. That GAAP guidance sits above our earlier guidance because we anticipate a gain of $260 million-$280 million from selling our CAM business, which mostly offsets charges tied largely to footprint actions. For the full year, interest expense should now come in at roughly $270 million, reflecting three quarters without CAM, the lower debt profile that results, and reduced interest during the first quarter. Moving to second quarter guidance: we expect net sales of approximately $3.9 billion, a slight decline versus last year caused by the CAM divestiture, yet a low single-digit % increase organically. Adjusted earnings per share should be about $1.15-$1.25. During the second quarter, pricing, tariff mitigation, and productivity efforts should produce an improvement of roughly 300 basis points year-over-year in adjusted gross margin, which offsets the ongoing volume deleverage impact from the second half of 2025. Also, our adjusted EPS for the quarter is based on a planned tax rate of approximately 20%. There is one more thing to mention regarding tariffs, and that concerns 232 tariffs, which a policy change on April 6 modified.

Patrick Hallinan executive
#4

How the 232 tariff rules get implemented is a complicated matter, and sweeping sector-level news stories don't reliably reflect what happens to our P&L. Even though plenty of market chatter suggested we had an unusually large vulnerability to those steeper Section 232 rates, when we run the numbers the added pressure comes to only $15 million annualized, and under $10 million across 2026. Keep in mind that once you net out every 2026 tariff change — including the Section 232 modifications plus our refreshed assumptions for the remaining months — tariffs should actually work in our favor compared with what we previously assumed, and that benefit will be canceled out by inflation stemming from the war, battery metals, and tungsten. Now let's move to slide eight. Let's pull back and examine the implied adjusted gross margin figures we expect for the first half versus the second half, measured year-over-year, consistent with our guidance for the full year and the second quarter. For each half of this year we're anticipating substantial gains — about 150 basis points of implied betterment in the first half, and about 200 basis points of implied betterment in the second half; during Q1, AGM was basically level, slipping 20 basis points versus a year earlier, which came from the timing of tariff cost realization plus the volume deleverage offsets that we had foreseen and flagged back in February. As you'll remember, tariff expense and volume deleverage both peaked during the back half of 2025. Both of those effects moved off our balance sheet and into our first half 2026 income statement; we look for tariff mitigation to add more to margin gains as 2026 unfolds, since we keep advancing on USMCA compliance and on relocating production for our U.S. tools business out of China into North America. Going forward, we stay completely dedicated to delivering adjusted gross margins of 35+%, a goal we've held for a long time and which keeps shaping what we do and where we focus. We expect to hit that milestone by Q4 of 2026, and we still aim for 35%-37% adjusted gross margin by the close of 2028, just as we said during our previous earnings call. Another key item on this slide I should address is the debt paydown that came from completing the CAM divestiture to Howmet Aerospace for $1.8 billion; you won't find it in our first quarter financials, since the transaction closed on April sixth, after Q1 ended. Even so, it has sharply strengthened our balance sheet within the quarter and hands us an obvious opening for a more nimble approach to capital allocation. Net proceeds from the CAM deal came to roughly $1.57 billion, after accounting for projected taxes and fees. We directed the overwhelming bulk of those proceeds toward paying down debt during the second quarter; we had said our goal was 2.5 times net debt to adjusted EBITDA. Closing CAM, together with our emphasis on growing EBITDA, will get us there. The sole factor keeping us from reaching that point right now comes down to the usual seasonal patterns in our operating cash flow. By the time the year closes, we remain solidly on course to hit roughly 2.5 times. Hitting that key financial goal opens up more room for us on capital allocation. At this point, we're in a strong position to react to what the market throws at us, put money into growth, and boost how much value we create for shareholders. Our dedication to allocating capital prudently and speeding up value creation for investors hasn't wavered — that covers financing natural expansion, giving surplus capital back to shareholders in an effective way, and, whenever it makes sense, looking at bolt-on M&A. Through all of this, our aim is to keep an investment-grade credit rating. Looking at the short term, our clear priority is speeding up organic growth and deploying surplus cash to buy back shares when opportunities arise. The board of directors recently gave the green light for $500 million in share repurchases, which hands us the flexibility needed to act on that; to wrap up, 2026 looks poised to be another significant year for us as a company. Thanks to a solid base in place, a more focused portfolio, strict cost and capital discipline, and an unwavering commitment to our customers, we're in a good position to deliver growth and build long-term value for shareholders. I appreciate it, and now I'll hand the call back over to Chris.

Chris Nelson executive
#5

Thanks, Pat. This morning you heard that whether we win comes down to how well we carry out our strategy, and that strategy rests solidly on 3 strategic imperatives: bringing our brands to life with purpose, achieving operational excellence, and speeding up innovation. Pat laid out how we're concentrating on staying proactive in managing the things we can control, so we can steer effectively through shifting market conditions. Our commitment stands to push toward our near-term targets as well as our long-term goals. Looking forward, the opportunities ahead genuinely energize me, and I have confidence in our strategy and in the team carrying it out; we're building on momentum we worked hard to earn in order to serve our end users, and we're now set up to speed up shareholder value creation. Michael, we're ready to take questions now.

Michael Wherley executive
#6

Thanks, Chris. Operator, we can now start the Q&A.

Nigel Coe analyst
#7

Oh, thank you. Good morning, all. Appreciate the.

Chris Nelson executive
#8

Good morning, Nigel.

Nigel Coe analyst
#9

Good morning. I'll attempt to make this first question pretty straightforward. I was hoping you could break down for us how gross margin got better between the first half and the second half — roughly four points. My assumption is that CAM advantages play some role. You brought up tariffs, meaning USMCA compliance. There's probably some productivity in there too. Perhaps you could simply walk us through that four-point gain.

Patrick Hallinan executive
#10

Yes, Nigel, excellent question. This is something we're focused on over the long term, so our full intention is to reach it. What's encouraging, when we discuss the third quarter specifically, is that we could essentially already observe that gross margin percentage on our balance sheet. Beyond this point, the sole factors that could genuinely alter it would be if sales declined significantly or some enormous new inflation surge occurred. In other words, we can already see the 34 and a fraction percentage gross margin for the third quarter sitting on our balance sheet. When you consider that rising from, you know, the first half into the back half, you're really talking about, you know, 3 major elements that extend past the typical seasonality of Outdoor or the CAM matter you brought up. These are truly the ones that will maintain it and propel it over the long term, which is, you know, roughly 40% of the delta comes from net productivity gains tied to our ongoing continuous improvement initiatives. Approximately a comparable amount stems from realigning our fixed cost structure to the present volume environment that became evident in the back half of last year following tariff pricing. The last piece, so around 20% of the delta, is simply the continuing tariff mitigation efforts. You know, three levers — continuous improvement, adjusting to the current and volume environment, and then the continuing tariff mitigation — get us to that point. You know, we're fully confident we'll get there, and maintaining it will mean continuing to keep our cost structure matched to the volume environment, and handling inflation as it unfolds over the rest of the year, on however the war plays out and however, kind of, the battery metal situation plays out.

Nigel Coe analyst
#11

All right, thanks a lot. I want to ask something brief that builds on what we discussed regarding tariffs. You were quite explicit that the short-term advantages coming from IEEPA get canceled out by inflation in raw materials. What I'm trying to figure out is whether that IEEPA upside looks like it might be fairly substantial. Does it generate some short-lived gains in the P&L over the course of the year that later disappear, or does it even out more or less each quarter?

Chris Nelson executive
#12

Yes, Nigel, it's Chris here. What I'd say is that, looking at the upside we're currently seeing, we regard it — as Pat described in his remarks — as short-lived, since our expectation is that the 301s will come back at levels comparable to IEEPA. For that in-between stretch, the assumptions we've built in, taking into account all the modifications that were referenced, amount to a net tailwind. They do cancel out part of the inflation we're currently facing, not just in battery metals, but also what we're dealing with because of certain higher input costs that we'd attribute to the conflict in the Middle East. On balance, there is somewhat of a tailwind, yet our underlying assumption is that the tariff landscape we'll encounter will be approximately the same as what we had under IEEPA once the 301s take effect.

Julian Mitchell analyst
#13

Hello, and good morning. I'd like to dig a bit deeper into the volume situation for Tool & Outdoor. The pickup in Outdoor is, I'd say, a positive sign. I'm curious what you believe drove that, and what your expectations are for how T&O volumes will unfold across the rest of the year, considering there are some market share initiatives underway, yet perhaps consumer demand overall is somewhat softer?

Chris Nelson executive
#14

Julian, this is Chris. To begin, good morning, and thank you for being with us. Let me begin with Outdoor and share that I feel a great deal of pride in the team and am heartened by how they managed to carry out what we regard as our preseason window. Being capable of meeting orders, in my view, puts us in a spot to enjoy a solid selling season; which way that selling season will go is still uncertain, but we believe our positioning is strong regardless of how that selling season turns out. Should sell-through rise, we might capture some upside. Broadly speaking, within the Tools & Outdoor space, what I'd tell you is that we have not observed any meaningful shifts in what we'd describe as underlying demand. During the last call, we mentioned that we anticipated an inflection arriving in Q2, partly because of the prior-year comparisons, since, as you're aware, we dealt with interruptions to typical promotional volumes and timing; those returning this year will serve as a net tailwind when we consider volume against last year. Plus, when we discussed our plans to refine certain promotional strategies during those windows, compared with what we had in Q4, we anticipate those tailwinds will begin taking effect in the second quarter. We're, we're glad to observe that they're on track to deliver as we had anticipated. As for underlying demand when we entered the year, our view was that it would be fairly flat, and we continue to regard it as fairly flat. On a relative basis, we're pleased to be positioned year-over-year so that we can achieve the growth in Qs, quarters two and three, that we set out as part of our plan.

Julian Mitchell analyst
#15

That's excellent, thanks. Next, when we consider shifts in pricing and costs — as you mentioned, quite a bit is fluctuating on the cost side during the year due to tariffs and your own pricing programs. I'm wondering if you could offer additional detail regarding your approach to that price minus cost difference within the gross margin outlook you presented on slide eight throughout the year. How is the relationship between price elasticity and volume actually unfolding so far this year?

Patrick Hallinan executive
#16

Julian, my response would be that our stance on pricing for the year hasn't truly shifted in any significant way. As we've mentioned on numerous prior calls, deltas as large as 100 percentage points — or rather 100 basis points — can occur in any quarter depending on whether promo mix outweighs volume or not, and that may produce a 100 basis point fluctuation in the pricing we report for a particular quarter. Regarding the prices we intend to implement and the tweaks to promotions or chosen targeted opening price points, nothing has moved in any meaningful manner since the year began. I'd simply point out that, in this climate, the bulk of the pricing we implemented — which we clearly implemented last year — was meant to offset anticipated tariff expenses on a dollar for dollar basis, after which we'd recover our margin against those tariff expenses through tariff mitigation, and that remains very much our strategy. The way everything is structured remains unchanged for this year. As you've heard, we do have certain tariff tailwinds, mostly because Section 122's are lower than IEEPA's. We also face some inflation stemming from battery metals, tungsten, and oil derivatives tied to the war. Those two forces more or less cancel each other out across the year. Naturally, such things may shift on us over the course of this year, since additional trade discussions are happening this year, and it remains to be seen how the war unfolds. Should those inflationary pressures grow more evident in the back half or midway through the year, we'll determine what that implies for pricing during the later portion of the year or for positioning ourselves for 2027. At this moment, were you to ask us, our 2026 pricing strategy aligns with our initial guidance, and all of it is unfolding just as expected. Any inflationary pressures from this year that carry into the future, we'll address in the back half of the year or the early portion of 2027.

Tim Wojs analyst
#17

Hey there, everyone. Morning, and I appreciate all the information. Perhaps to kick things off, Chris, you brought up that you folks pushed a bit harder on pricing compared to a few of your rivals. At this point, several of those rivals appear to be rolling out additional pricing as we move forward into 2026. I'm simply wondering whether you're beginning to notice any kind of change on the ground regarding how that affects your relative POS results across those different categories.

Chris Nelson executive
#18

Much appreciated for that question, and thank you for being here. Like we discussed during the previous call, we were observing and anticipated observing additional competitive pricing activity in Q1, and indeed that's what happened. I'd describe that, together with the steps we took when we reviewed what required targeted tweaking in our promotions and a portion of our pricing on the more elastic products — we've witnessed what I'd call, for want of a better phrase, a more level competitive landscape regarding pricing now that the competitive situation has unfolded; on top of that, since we've fine-tuned our pricing and promotions entering the year, as you can picture, we're monitoring it at the SKU level to grasp the effect and determine whether it matches our expectations and what we projected. So far, it has come through that way. We feel good about what we're observing as we head into Q2. That said, I should mention that most of those promotional adjustments actually land in Q2, so we're watching that carefully. Again, we will experience greater promotional volume compared to the prior year in that segment. At present, we're seeing it respond the way we expected. And once more, to echo what Pat said, that would be — that we had confidence in being in line with our guidance on price, with the caveat that it might fluctuate somewhat from quarter to quarter depending on promotional participation.

Tim Wojs analyst
#19

Got it, got it — that's really helpful, actually. I did want to follow up on one thing, and it's specifically about CRAFTSMAN. My understanding is that there's supposed to be a bigger relaunch of that product at some point later in the year. So I guess I'm curious: when is that going to take place, and could it end up having a more significant impact on sales and margins?

Chris Nelson executive
#20

Great question. The way we've laid it out is that, obviously, if you look back a number of years, we started putting real investment and dollars behind the brand health, the go-to-market, and the sell-through for the DEWALT brand. The trends we're observing continue to be very positive, particularly within the professional segments. As we noted previously, and as was evident last quarter, we recorded high single-digit sales growth in our professional North America construction and industrial channel, which is really quite encouraging. To build on that point—and we did mention some of this during the prepared remarks—over the last few years we've also been focused on updating the Stanley brand's product lineup. We started that effort by bringing out our measuring and layout SKUs, and you'll continue to see more from us this year on the V20 platform under the Stanley brand. Given where we stand and how encouraged we are by the results so far, along with the dedicated selling resources we've established in Europe, we believe we're on track to turn to growth by the middle of the year, just as we planned. With CRAFTSMAN, a big part of our effort has gone into repositioning its cost structure from a platform standpoint, and we're now rolling things out. This year we've got one of the biggest new product introduction launch cycles we've ever run for that brand since acquiring it. Our expectation is that a substantial portion will be on the market by the time the year closes, with the payoff showing up late in the year and then carrying us into 2027 as CRAFTSMAN shifts into growth. I realize I went beyond what you asked, but this reflects how we've been approaching our core brands, and we should see that CRAFTSMAN momentum arrive by year-end and definitely as we head into 2027.

Sam Reid analyst
#21

Thank you very much, everyone. I was hoping we could go a bit further into where things stand with your USMCA and tariff programs, and then perhaps walk through where the China tariff mitigation effort stands too. Thanks.

Chris Nelson executive
#22

I suppose that one's mine. When it comes to USMCA, we had discussed wanting to be certain we were approaching or beating the industrial averages for USMCA qualification. As we mentioned when this started, you know, I believe, in early 2024, we sat well under average, with about a third of our products qualifying under USMCA. We've made enormous strides on that front and are running somewhat ahead of schedule on those efforts, and we will, you know, definitely look to be at or above that average before too long; on the USMCA front we're on pace, maybe a touch ahead. To repeat what we've said, our stated intention is for under 5% of our U.S. sales to come from product sourced in China by the time the year ends; we're on pace for that as well. Despite every change we've witnessed, and the tariff policy modifications involving IEEPA, Section 122s, and so forth, we've stayed on the very same strategic path we set out originally, which was to, above all, look after our customers, ensuring we have availability, and then to make sure we can, through operational actions and by leveraging our worldwide footprint, keep mitigating the costs of those, of those tariffs so that we're pushing toward a margin position that lets us keep investing in the innovation and brand health we need in order to succeed. You know, I give huge credit to the team for how they've worked tirelessly to make sure those projects stay on pace or ahead of the pace we expected. We feel good about where we stand there.

Sam Reid analyst
#23

That's useful, everyone. I'll share it with the team.

Andres Padilla analyst
#24

Hello. Good morning. Andres here. I'm filling in for Jonathan. Thanks very much for taking my question. To start, you mentioned stronger Outdoor sell-in before the spring season and better conversion in the pro channel. Could you say more about what's behind those trends and whether Outdoor demand can be sustained from here? Thank you.

Chris Nelson executive
#25

From an Outdoor standpoint, I'd say we have a channel where folks feel good about the season ahead. Inventory levels meant people were making sure they were positioned to want to, well, be set up properly with the right inventory once the selling season arrived. Our team managed to produce, execute, and get those orders filled on time. We're right at the start of the important outdoor season, so we'll find out how it goes. We, we are positioned to capture any upside the market might provide, and I think that's the best outcome we could ask for right now. I also want to once more congratulate the Outdoor team and everything they've managed to achieve. What we've observed in terms of growth in the professional channels, in both the U.S. and rest of world, and we mentioned, and I did earlier, the high single-digit growth in the U.S. commercial and industrial channel. That's really come from a multi-year strategy on our part to put money into the workflows we require with the products we require for those key trades we're targeting. And we keep filling out that product offering, and I mentioned a lot of what we're seeing with momentum in our PERFORM & PROTECT product line in the DEWALT brand. We keep putting money into our go-to-market and our service and sales force around the world. I think the mix of those two things, plus the activity level we see in the professional channels, sets us up well to keep growing, we believe above market rates in those professional segments, and especially with the DEWALT brand.

Andres Padilla analyst
#26

Excellent. I'll relay that. Thanks very much.

Anvi Sarbhai analyst
#27

Hello, and good morning; Anvi here, filling in for Joe. Appreciate you taking my question. I'd like to use a minute to talk about the CAM divestiture. I understand there's been a change in the guidance, since the timing of the close shifted. From what I gather, it amounts to $15 million as a net impact across the year. Could you clarify what you meant when you said Q2 wouldn't see a meaningful effect? I'd just like the puts and takes regarding the interest offset, plus the profit, for both the second quarter and the full year.

Patrick Hallinan executive
#28

Yes. Yes. At the time we issued our initial guidance for the year, clearly there was uncertainty around exactly when the CAM transaction would land. We said early in the year that for each quarter CAM sits in our results, it contributes approximately $110 million-$120 million in net sales and approximately $10 million-$20 million in pre-tax profit. The year unfolded largely consistent with that. Removing CAM from Q2 for essentially all but one day of the quarter produced a net sales decrease of about $110 million and a pre-tax operating profit decrease of about $15 million. As we mentioned on the call, there's a drop in second quarter interest expense that's about the same size. On a pre-tax basis, those items — losing the contribution versus losing the interest expense — largely cancel each other out, which means the quarter and the year stay unaffected. Clearly, the CAM transaction delivers net proceeds slightly under $1.6 billion, which we directed toward paying down debt during the quarter. You'll notice, with everything else held constant, our leverage declining by that amount in Q2; additionally, some working capital will be released. CAM was a fairly working capital-intensive operation, though that had already been baked into our year-end results. Those really are the main puts and takes. There aren't really any other major puts and takes there. What remained uncertain back at the beginning of the year was whether that would occur within 2026 and at what point, and clearly, we now know the answer.

Anvi Sarbhai analyst
#29

Understood — that clears things up. As a quick follow-up, given that you've discussed both the CAM effect and the OPG Gas walk, could you share a bit of detail on the reasoning behind this announced shift and what it actually signifies? I realize you've already put numbers to it, but is there anything specific about the quarter we ought to bear in mind?

Patrick Hallinan executive
#30

So what you're bringing up is that, for certain gas walk-behind items within Outdoor, we moved from being a complete manufacturer using our own model to having some products be licensed. That's the route we use to deliver those to our channel partners so they get a complete, well-rounded lineup. This really takes place in the final third of this year. It's barely connected to the current spring and summer selling period; it's tied more to the tail end of that period and to how the opening stretch of 2027 unfolds. If you remember, this amounts to essentially a top-line shift worth a couple hundred million dollars that, on balance, ends up accretive to the bottom line. It's a project plan that's underway and, at this stage, is progressing the way we anticipated. Nothing major has shifted there. We flagged it alongside CAM early in the year purely because we expected these items to significantly affect our reported versus organic sales during this year's 3rd and 4th quarters; the sole reason we mentioned them side by side is the effect they'd have on reported versus organic sales across the back half of the year.

Brett Linzey analyst
#31

Hey, good morning, all.

Chris Nelson executive
#32

Good morning.

Brett Linzey analyst
#33

My question concerns the Pro and Tradesman replacement cycle when it comes to battery platforms. I've long viewed that as roughly a 5 to 6-year turn, so I'm curious how you see the life cycle there. What's your read on how the next Pro replacement cycle is shaping up, with some of those pandemic-era units beginning to churn? Is there anything on the innovation side that might be stirring up some of that demand, and what would the milestones look like internally?

Chris Nelson executive
#34

Yeah, good question. Honestly, I'd say our thinking is that the replacement cycle applies a bit more within, you know, more of the DIY segment, fitting that kind of timeframe you're describing. The truth is, people who work in the trades run their equipment so hard that wear happens faster, so that window of time doesn't really hold for them. On top of that, when they switch from one job site to another, they typically buy a full set of tools for the new location. From what we've seen, demand is strong in particular segments of commercial and industrial, especially data centers, where our battery platforms are seeing significant interest to fuel future growth. As for the DIY segment, our view is that we've largely moved past it — what looked like volume being pulled forward simply had to work its way out over time. From my perspective, that issue is now in the past. As for the DIY segment, what we're observing looks like a broader consequence of a consumer who is feeling down, combined with project, renovation, and repair activity running below typical levels. When it comes to the products we've been focused on to keep expanding that battery platform, there are a few key efforts. First, we're engaging with all of our main battery platforms—the 20 volt XR line, FLEXVOLT, and the newly introduced POWERSHIFT—so that we have three core platforms to develop around in the professional market. We're making certain we're fleshing out every tool that each important trade might require and desire, to help them work more efficiently and safely within their processes. We've focused on both strengthening and getting the most out of those three main platforms, while also improving the supporting tools, so that we can capitalize on what we consider a very solid worldwide installed base for our professional batteries and tools.

Brett Linzey analyst
#35

Thanks, Chris. That's helpful context. I'll keep it to just one question.

Chris Snyder analyst
#36

Thank you. I'd like to ask about how the competition looks right now. It sounds like a few of the players in the market made pricing moves during Q1. So as we head toward the back half of the year, are you noticing anything shifting on the competitive front? The reason I'm asking is that it appears, you know, while your team is getting a tailwind, or a tariff offset, from the shift out of IEEPA and into Section 122, my guess is that many of the Asian players in this market are getting an even bigger, you know, tariff offset from that rollback. So I'm just curious, you know, how do you read that in terms of possible price competition during the back half of the year? Thank you.

Chris Nelson executive
#37

There are a few pieces to that. Again, what our calculus and baseline tell us is that we expect Section 301s will mostly take the place of IEEPA. As for the back half of the year, we don't expect the environment to shift in any major way, first of all. Because of that, I'd characterize it as more of a steady sort of environment. Anything occurring in the near term would likely be temporary by nature. When we consider how our strategies fit together and how that compares against our competitors, plus what our global footprint gives us and how we're pushing toward, you know, very high percentages of USMCA-qualified product, which carries, you know, far less tariff exposure, we think we sit, you know, at parity or perhaps with a slight edge as we look ahead in that environment too. What you brought up, which I believe is worth highlighting, is that the pricing environment has unfolded pretty much the way we expected it to, and we did see those Q1 moves across the competitive set, which I think matters as we enter Q2 and with the strategies we said we'd pursue to make sure we capture the chance to pivot toward growth in Q2 and Q3.

Rob Wertheimer analyst
#38

Thanks. It looks as though the broader consumer pattern has been steady, even though conditions around the world feel somewhat less settled. Could you share anything about how things went in April across Europe and the U.S., just so we can tell whether that steadiness has carried on? Thanks.

Patrick Hallinan executive
#39

Sure, Rob. As you know, we can't really discuss how Q2 will end when we've only just finished Q1. What I'd say is that what we saw up to the close of the first quarter lines up with what happened in the latter half of last year — and as you suggest, against a global macro backdrop that's genuinely tough, both the pro and the consumer are, I'd say, holding up better than you might have anticipated. Clearly, things softened in the latter half of last year once tariff pricing took hold, and volumes shifted in response to those prices, at roughly one-to-one elasticity; that carried over into the latter half, or rather the first half, of this year. Our outlook assumes that although buyers will keep facing pressure, they'll stay about where they've been across the past three quarters, and that's the basis for our outlook. We'll find out, as the war unfolds, whether that shifts. Should it shift, we'll ramp up any production we need on the upside if the consumer recovers somewhat. If the consumer softens somewhat, we'll keep a close eye on controlling our overall cost structure while protecting the long-term investments we need to grow the business and shift toward growth. I'd say your description matches where our guidance sits, which is a tough environment in which buyers remain fairly steady at the level they've occupied for roughly the last three quarters.

Michael Wherley executive
#40

That brings us to the end of the question-and-answer portion. Once more, we want to express our appreciation to all of you for spending time with us and taking part in today's call. Should any additional questions come up, feel free to get in touch with me personally. Enjoy the rest of your day.

Operator operator
#41

This concludes today's conference call. Thank you for your participation. You may now disconnect.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Stanley Black & Decker, Inc. transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to Stanley Black & Decker, Inc. earnings transcripts and 132,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.