Metallus Inc. (MTUS) Earnings Call Transcript
November 7, 2025
Earnings Call Speaker Segments
Hello everyone, and thanks for joining us on Metallus's call covering results from the third quarter of 2025. My name is Jennifer Beeman, and I serve as Director of Communications and Investor Relations here at Metallus. With me on the line are Mike Williams, our Chief Executive Officer; Kris Westbrooks, who serves as President and Chief Operating Officer; John Zaranec, Executive Vice President and Chief Financial Officer; and Kevin Raketich, Executive Vice President and Chief Commercial Officer. By now, each of you ought to have gotten a copy of the press release we put out yesterday evening. On this call today, we might offer forward-looking statements, as the SEC defines them. A number of factors could cause what actually happens to differ substantially from what we project or suggest, and those factors get more thorough treatment in last night's release. Kindly look at our SEC filings, among them our latest Form 10-K and Form 10-Q, along with the list of factors contained in our earnings release, all of which you can find on the Metallus website. In places where non-GAAP financial information comes up, further specifics and reconciliations to the comparable GAAP figure also appear in the earnings release. Having said that, I'll hand things over to Mike. Mike.
Hello everyone, and thanks for being here this morning. Let me begin by talking about safety. All through this year, we have stayed committed to our goal of being known as the safest specialty metals operation anywhere in the world. Consistent with that goal, we keep putting significant money into keeping our people safe. We are still on pace to invest $5 million this year to further strengthen our safety management systems and critical equipment. So far in 2025, we have recorded zero serious injuries. Those are incidents that threaten or fundamentally change a person's life; on top of that, we have achieved a 15% decrease in days away and restricted work cases, along with a 34% decrease in lost and restricted work days versus the same period last year. During October, we finished our planned annual maintenance shutdown at Faircrest successfully. Shutdowns like this demand intense coordination, with our teams working alongside outside contractors. Across nine days, we carried out essential maintenance work so that our melt shop assets will be reliable and perform well in 2026. Above all, I take pride in the fact that no serious safety incidents occurred during the Faircrest shutdown. Keep in mind that we will have more shutdown activity at our remaining facilities late in the fourth quarter. What customers tell us keeps confirming how strong our service and quality are. We just finished our yearly customer survey, and I am happy to report that more than 97% of those who responded indicated they would recommend Metallus products to others, which speaks to the outstanding work our teams do daily. As we anticipated, the survey revealed that a majority of customers favor purchasing steel produced in the United States, and that preference plays a major role in their buying choices. We continue to see interest from both new and established customers who are making active moves toward domestic supply chain solutions. Thus far in 2025, we have sold successfully to more than two dozen new customers, and that will fuel future business growth. Beyond that, our overall order backlog rose substantially year over year. To be specific, the aerospace and defense backlog has grown roughly 80% versus a year ago. With the year's final quarter now underway, we have kicked off our yearly commercial contract negotiations. Our objective is still to lock in about 70% of our long products business via annual agreements. Although negotiations are ongoing, the discussions we have had with customers about 2026 have been encouraging. Now let me move to third quarter business results. Even though shipments dipped a bit from the second quarter, sales grew thanks to a favorable product mix, with the aerospace and defense end market continuing to expand. Measured year over year, third quarter shipments rose 36%, powered by broad-based gains across every end market. Our present lead times stretch to late January for SBQ bars and into February for seamless mechanical tubing products. Adjusted EBITDA climbed sequentially to $29 million, fueled by our expanding participation in the aerospace and defense end market and steadiness in the other end markets. On top of that, stronger output levels across the quarter gave us better leverage on fixed costs. Let me now walk through a few third quarter highlights from the end markets we serve. Industrial shipments came in a bit lower than the prior quarter. Inventories at distribution customers have gotten healthier, yet they're still on the light side and consistent with demand. A number of important customers have signaled they intend to step up operations and are offering more optimistic projections for 2026, though others are staying careful and watching inventory positions at year-end closely. Automotive shipments edged up sequentially. Demand from key automotive customers held up well for the full quarter, and so far we haven't seen any interruption tied to global supply chain difficulties. Energy shipments stayed at lower volumes compared with the previous quarter. As imports come down and tariff enforcement gets tougher, we're starting to pick up more customer share for 2026. Even so, conditions in the energy market as a whole are still soft. Last, stronger shipments in aerospace and defense helped deliver a better product mix this quarter; we keep building momentum on new and existing programs alike, and all of it backs our goal of an annual A&D sales run rate of $250 million by mid-2026. During the quarter, we brought in several additional customer opportunities for our specialty bar and tubing products across applications such as new munitions programs, gun barrels, and aerospace bearings. We also just locked in prototype orders with a number of customers. Once those reach full commercialization, they'll make use of Metallus's carbon and specialty alloys in newer warheads and in rocket motor casings. These are uses where strength, efficiency, quality, and shorter lead times matter greatly. Today, Metallus backs several dozen defense programs, with expansion coming from traditional prime contractors as well as emerging industry producers. Construction of the Blum Reheat and roller furnaces is proceeding on schedule. Both of these assets will expand our capability and make our throughput more efficient. We stay optimistic about what lies ahead in the expanding aerospace and defense market. Moving to another area of strength, we're concentrating on expanding our role in the vacuum arc remelt, or VAR, steel product line. We recently signed a long-term supply agreement with a trusted partner for VAR steel, which reinforces our strategic position and locks in a dependable, high-quality source of material to underpin continued sales and profit growth. Before handing things to John, I want to give a quick update on our labor negotiations. As we shared on October 30, members of our local USW voted against ratifying the tentative labor agreement we had worked out with the union negotiating committee. Though the result is disappointing, we're still dedicated to reaching a fair agreement that backs our employees and fits with Metallus's long-term strategic goals. The existing contract has been extended by 90 days, to January 29, 2026, and we anticipate our operations continuing without disruption. We're grateful for our shareholders' support, our customers' trust, and our employees' commitment as we look ahead to a stronger 2026. At this point I'd like to hand the call over to John.
Thanks, Mike. Good morning, everyone, and I appreciate you being on our call for the third quarter earnings. Over the quarter, our team produced sequential gains in net sales, melt utilization, and profitability, which matched the guidance we had provided. We likewise moved our capital investments forward safely, within budget, and according to plan. Turning to the top line, net sales for the third quarter came to $305.9 million, up $1.3 million from the prior quarter, mainly because of greater shipments in aerospace and defense along with stable volume in the auto and industrial end markets. Net income for the third quarter reached $8.1 million, or $0.19 per diluted share. Adjusted net income was $12 million, or $0.28 per diluted share. Adjusted EBITDA for the third quarter came in at $29 million, a 9% sequential rise, mainly due to a better product mix and ongoing gains in melt utilization that produced stronger fixed cost leverage. This represents the fourth quarter in a row of sequential improvement in both net sales and adjusted EBITDA, which highlights how consistent our commercial execution is, our improving operations, sustained demand in our core markets, and our emphasis on growing in aerospace and defense. Operating cash flow during the third quarter was $22 million, mainly from profitability, partly offset by a modest rise in working capital needs tied to supporting the growing business. At the close of the third quarter, cash and cash equivalents stood at $191.5 million, which includes roughly $21 million of government-funded cash on hand for future outlays as we wrap up our capital projects funded by the U.S. government. Capital expenditures in the third quarter were $28.4 million, including about $22 million of third quarter CapEx backed by prior government funding. For the full year of 2025, planned capital expenditures are about $120 million, a bit below prior guidance because of the timing of cash payments. That full year CapEx guidance includes roughly $90 million of spending funded by the U.S. government, in line with what we previously guided and with our continued successful execution of the projects. On government funding, the company received $10 million of cash from the government during the third quarter as part of the nearly $100 million funding agreement announced earlier in support of the U.S. Army's mission to increase munitions production. Through the end of September, the company has received about $82 million of government funding to date, with another $4.1 million received in October. We expect to receive the remaining committed government funding in early 2026 as the mutually agreed-upon milestones are achieved. As a reminder, this funding will cover a substantial portion of both the new Blum Reheat furnace at the company's Faircrest facility and the new roller furnace at the Gombrionis facility. On shareholder return activities, the company repurchased 178,000 shares of common stock for $3 million in the third quarter. At the end of September, $90.9 million remained available under our share repurchase authorization. Starting from when we first began buying back common shares in early 2022, together with our convertible note repurchase efforts, we've brought diluted shares outstanding down by 25% — that's 13.5 million shares — relative to the fourth quarter of 2021. These moves show how solid the company's balance sheet is and our confidence in cash flow generation across the cycle. On liquidity, we're still in a strong spot with $437 million in total liquidity and no borrowings outstanding as of September 30, 2025. Now for the near-term business outlook: on the commercial side, we expect fourth quarter shipments to come in 5%-10% below the third quarter, mainly because of typical year-end seasonality and possible global supply chain challenges for our customers. We anticipate base price per ton will rise slightly as we capture the previously announced 5% bar and tube price increases taking effect through the fourth quarter. Product mix should be less favorable than the third quarter, driven by the mix of sales within the industrial and aerospace and defense markets, which is largely a timing issue. To sum up commercially, we're looking at lower shipments and a slightly weaker product mix versus Q3, partly offset by higher base price per ton, with the net effect expected to be a $2 million-$3 million adjusted EBITDA sequential headwind. Operationally, annual shutdown maintenance in the fourth quarter will run approximately $11 million, which is a sequential increase of roughly $8 million from the third quarter. The timing of that planned annual shutdown maintenance, along with normal fourth quarter commercial seasonality, will bring melt utilization down from the 72% we achieved in the third quarter and is expected to produce a sequential decline in fixed cost leverage of approximately $3 million. Lastly, depending on where things stand and the timing of a new labor agreement, we might also incur additional labor and benefit costs, which could lead to a sequential cost increase in the fourth quarter. Taking all of these elements together, the company expects fourth quarter adjusted EBITDA to be lower than the third quarter, mainly because of our normal year-end seasonality, planned annual shutdown maintenance costs and timing, and a few potential customer global supply chain challenges. Compared with the fourth quarter of 2024, we expect adjusted EBITDA to improve slightly. To close, thank you to all of our employees, customers, and suppliers for their support. As a high-quality, U.S.-based specialty metals producer serving critical markets, we're well positioned for a successful 2026 and beyond. We remain committed to delivering value to our shareholders by driving profitable growth and executing our capital allocation strategy. As always, thank you for your interest in Metallus. We would now like to open the call for questions.
Morning, everybody, and I appreciate you fielding the questions. Let's begin with automotive; it rose quite a bit compared with the same period a year ago, and during the prior quarter, you mentioned that you were getting back some domestic market share. I'm wondering whether that's happening, and once you respond, I have something else to ask.
Of course, John. I appreciate the question. Yes, I'd say when you consider the platforms we're involved with, they tend to be the SUVs, trucks, and so forth, which keep selling at a reasonable pace. And in fact, you know, the automakers had provided a forecast suggesting the quarter would come in weaker, yet that never happened. So consumers continue purchasing vehicles. They still need to manufacture transmissions and motors, and so on, to equip those vehicles, and that's exactly where we excel. So we'll watch how Q4 unfolds; we do anticipate some seasonality from them. And beyond that, there's potential for certain supply chain issues during the fourth quarter, with their supply chains possibly interrupting vehicle output to the degree we experienced in Q3. Is that a satisfactory answer?
Yeah. Regarding supply chains, you actually used the word global. I'm wondering, do you mean the Ford issues in particular, or is there more going on?
There is worry, or at minimum there has been openly expressed worry about chip availability and other matters involving their supply chain. Yes, Ford is the standout, since much of that has appeared in press coverage available to the public.
All right. When it comes to that $3 million to $5 million you figured you'd spend on the labor negotiations, what portion of it did you actually take on during the third quarter compared with what you'd anticipated?
Practically none, apart from what we paid to negotiate. A big chunk of that three to five is contingent on the last round of talks. So there's still more ahead on that front.
That's reasonable. Has anything changed for you because of the tariffs? Last quarter we spent a bit of time on this, and at that point there was a sort of holding pattern. I'm curious whether you're now seeing buyers respond more directly to what the tariffs are doing. A related angle: could the government shutdown be affecting the A&D business in any way?
No, nothing has hit A&D. National security comes first above all else, and they require those quantities of munitions and weapons programs to be delivered; so no, we haven't felt any effect there. Could you repeat the first portion of your question?
Did tariffs affect your customers at all? During the previous quarter, you more or less mentioned that people were taking a wait-and-see approach.
Now, about tariffs.
Yeah.
Honestly, I'd say that the tariff situation has worked in our favor. New customers are coming on board. We've had new buyers arrive, and there's been an enormous level of inquiry activity tied to 2026, with more folks attempting to establish a domestic supply chain, as you heard from us in our remarks. On the commercial sales side, things have been quite positive; the only issue is how quickly those domestic awards get granted. One downside is that we're experiencing some tariff effects on certain materials we buy from overseas for our operating supplies and manufacturing.
All right, I'll rejoin the queue. Appreciate you fielding that, Mike.
Thank you, John.
Hi there, I really appreciate it. Good morning to you.
Hello, Phil. Morning.
Mike, I realize you already touched on this somewhat when answering the previous question, but could you spell out precisely what the global supply chain difficulties are that you brought up? Does this mainly involve automotive and Ford, or are there additional aspects? I was just hoping for some background.
No, what I mean is, reports have been circulating that we've been informed about, concerning, once again, some chip supply. Naturally, you're aware of how the aluminum supply situation in the domestic market has affected the Ford F-150. Those are sorts of things we know about; we haven't yet observed that impact, though it could potentially arise down the road. We simply wanted to mention it. Truthfully, it comes down to a matter of timing. Anything they fail to build, they will build eventually, since they'll be looking to hit sales targets and so forth for 2026.
Understood. When you mention better year-over-year EBITDA for Q4, is that factoring in any possible labor contract talks, or does that sit apart from what you said?
I'm not sure I follow your question. We've said that should a contract agreement come through during the fourth quarter, those costs John laid out in his remarks will show up.
We haven't put a number on that as of now, though I believe there could be some extra expenses involved. The timing is really what it comes down to.
So, timing really is the key factor here. At this moment, we've got an extension running through January 29, and we're going to put in serious effort to reach a contract that's fair and equitable while also matching up with our strategic objectives for the longer term.
Thank you.
Thanks, Phil.
Hello at the start of the day, and I appreciate your taking the question I have.
Good morning to you, Dave.
Morning. I'd like to begin by discussing energy and market. How much potential do you see for volumes to recover during 2026?
A great deal depends on crude prices and worldwide demand, correct? There are additional things that play a role, such as sanctions and how well they work against Russian oil. Might that boost North American output? Greater production would probably work in our favor. Rising oil prices usually push production up as well. Then there's the matter of these LNG facilities being constructed that will start up across the coming 2 years — they'll fuel demand for gas, pipelines, and so forth, or natural gas output, and so on, to supply the worldwide markets those facilities aim at; all of that is encouraging, though it doesn't happen overnight. What we're actually observing, and where I'd say we may see gains in 2026, is this: the energy and market segment has traditionally bought substantial SBQ volumes for offshore use, and those tariffs have begun to shape both their thinking and their purchasing approach. For 2026, we've received an enormous number of inquiries from our energy and markets customers.
Got it — that helps a lot. Now, on your order book, I'm just wondering how you think it's shaping up compared with where things stood at this same time a year ago. I recall you saying you'd like to head into the year roughly 70% booked. Do you think you're on track to hit that target versus last year, or are we perhaps getting a bit ahead of ourselves there?
Yeah, we hold a fairly firm belief that we'll reach that 70%. It might come in somewhat higher, depending on what pricing looks like. Some customers — not all of them, but several important ones — are telling us their internal production forecasts for next year are rising, and we're seeing them request additional volume for 2026. That makes us quite pleased, and we're eager to deliver a 2026 that's even better.
Got it. That's really useful. Perhaps just one additional item from me. I recall during the prior quarter we discussed pricing for energy inputs and that you had a fresh negotiation in the works; we would simply like to know the current status as we head into the coming year.
Electrical energy is probably the most significant one. A long-term contract we held came to an end in May of this year, which meant we needed to go out to the market. What I can share is that pricing in the market shifted considerably compared with the period of that very favorable electrical energy contract we previously had. Right, and we have been open about the fact that our electrical energy purchases are costing us more; at present we hold a two-year agreement covering a large share of what we require, though a small share remains subject to market pricing, and we will monitor that closely. A great number of projects are in our pipeline aimed at bringing down our electrical energy usage, and beyond that, boosting our production efficiency in terms of how many kilowatts per ton we consume. When it comes to natural gas, we have bought forward 70 to 80% of what we need for next year. In fact, we are likely positioned out five years across various supply requirements, yet we remain an active participant in the market and are highly opportunistic. We seek out the strongest competitive prices available and set ourselves up to achieve the best cost on those unit prices for electricity as well as natural gas.
Yes. Dave, just quickly, something else to mention regarding that, in terms of what Mike said about electricity, if you remember, during the close of Q2, we mentioned a cost increase of $2 million-$3 million from one quarter to the next. That's exactly what happened for us. It was roughly what we had guided, and it matched what we observed. It fits with the agreement we've secured for the coming two years.
Got it. That feedback is really helpful. I appreciate your time answering my questions. Best of luck in Q4.
Hey, Dave, thank you.
Yeah, I'm just wondering about the capital expenditures. This year you brought that figure down somewhat. How will things stand next year?
At the moment we're working through the planning stages on that. The forecast came down purely because of scheduling; it depends on when work wraps up and also on payment conditions linked to how much time passes after completion before payment is required — scheduling is the whole story. As for 2026, John, we're right now in the planning stages. We'll have more to say on that at the start of next year.
All right. As I remember it, you enlisted an outside firm to assist, perhaps, with operations on your floor. Could you share any updates on that effort and how things are going?
Yes. We're quite happy with how it's coming along, and those outcomes are going to become visible across the rest of this year. The initiative hasn't wrapped up yet, but we're very satisfied with what's come out of it, what they've found, and the enhancements they're helping my team put into place. This initiative continues through late March. Many of those gains are going to be captured in 2026.
That does help, thanks. So finally, regarding those fresh A&D bookings, is there anything more you can share, and could you speak to when revenue gets recognized — or when it becomes material — from that work?
Sure. Some of that is already showing up for us, especially within VAR VIM sales. That piece keeps expanding, and it amounts to pure value creation for this business. It will keep expanding through 2026 as well. On munitions, we anticipate demand will keep building as certain issues further down the supply chain are worked out across the tail end of this year and into the early part of next year. As we mentioned before, we keep winning a variety of new programs — weapons programs, gun barrel programs, aircraft bearings, and so on. In my opinion, that demand, along with the value growth actually coming to fruition, is set to show up in 2026 at a significant pace. As we've said, our broader goal was to reach or surpass a run rate of $250 million in yearly revenue, and we have strong confidence we will get to at least that level by mid-2026.
That's great. Thanks for letting me ask a few more questions. I appreciate that.
Hey, John, thank you.
Thank you all for joining today, and that concludes our call.
That wraps up the call for today, everyone. We appreciate each of you for being here. At this point, you're free to disconnect.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Metallus Inc. transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Metallus Inc. earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.