Home / Transcripts / Metallus Inc. (MTUS) · May 5, 2026

Metallus Inc. (MTUS) Earnings Call Transcript

May 5, 2026

New York Stock Exchange US Materials Metals and Mining earnings 35 min

Earnings Call Speaker Segments

Jennifer Beeman executive
#1

Hello everyone, and thanks for joining us for Metallus' conference call covering the first quarter of 2026. My name is Jennifer Beeman, and I serve as Director of Communications and Investor Relations at Metallus. With me on the line are Mike Williams, our Chief Executive Officer; Kris Westbrooks, President and Chief Operating Officer; John Zaranec, Executive Vice President and Chief Financial Officer; and Kevin Raketich, Executive Vice President and Chief Commercial Officer. By now you should have our press release, which went out last night. On this call today, we might make forward-looking statements as defined by the SEC. A variety of factors could cause our actual results to differ materially from what is projected or implied, and we describe those factors in more detail in yesterday's release. Please take a look at our SEC filings, including our most recent Form 10-Q, which will be filed later today, along with the risk factors contained in our earnings release, all of which can be found on the Metallus website. Where we reference non-GAAP financial information, additional details and reconciliations to the GAAP equivalent are provided in the earnings release and the earnings presentation, which are available on the investor page at metallus.com. With that, I'll hand things over to Mike. Mike?

Mike Williams executive
#2

Hello everyone, and thanks for being here this morning. I take encouragement from how our team keeps its attention fixed on operational priorities, which made our first-quarter results stronger. Across the markets we serve, demand keeps getting better, and our order book rose compared with a year ago, helped by general industrial and defense demand, distribution inventory levels coming down, and onshoring. In the markets we serve, Section 232 tariffs keep bolstering our competitive standing. The April 2026 changes to those tariffs touched only downstream steel that contains derivative products, so our products — classified as primary steel — are unaffected. Above all, the 50% tariff on imported primary steel, which covers all long bar and tube products, is still in force, strengthening the long-term competitiveness of steel made in the U.S. The capital investments and operational system improvements we made while the fourth-quarter planned shutdown was underway helped push melt utilization higher both sequentially and versus a year ago. During the quarter, our strategic operational advancements hit critical milestones, most notably the safe and successful reheating and rolling of the first blooms out of our new bloom reheat furnace; that result speaks to the dedicated work of our internal teams and the backing of the Department of War. As a reminder, the new bloom reheat and roller furnaces allow for more consistent reheating, better product quality, and more efficient throughput. Indeed, the bloom reheat furnace recently showed a run rate of approximately 150 tons per hour, versus approximately 100 tons per hour with our legacy assets, plus significant gains in temperature uniformity; with these modern, efficient assets, we are better positioned to serve rising customer demand across all end markets, and we expect them to lift our operating leverage as time goes on. We anticipate the bloom reheat furnace being fully operational in early to mid third quarter, and the roller furnace fully operational in late third quarter; we also keep making meaningful headway in strengthening our operating systems, reinforcing consistent and efficient execution throughout the organization. These institutionalized systems help our teams spot issues sooner and drive stronger accountability. During the quarter, we brought this framework into additional areas with a focus on reliability and throughput. For us, safety stays a foundational priority and a critical ingredient in our long-term success. As ever, we concentrate on eliminating serious injuries through stronger controls, training, and leadership accountability. Our health and safety management system keeps maturing, with stronger proactive reporting, more near-miss identification, and targeted capability building in higher risk activities such as cranes rigging, lockout tagout, and machine guarding; moving toward leading indicators within disciplined risk management cuts variability, reduces long-term costs, and safeguards our most important asset, our people. Now to our first-quarter performance: shipments climbed 11% sequentially. Adjusted EBITDA for the quarter came to $24.6 million, a 39% increase over the first quarter of the prior year. This strong improvement highlights our disciplined execution against key priorities and operational improvements. Delivery windows keep getting longer, and right now they stretch into late Q3 for bars as well as seamless mechanical tubing. That shows demand for domestic steel is getting stronger, and it gives us a clear indication of the momentum we anticipate carrying through all of 2026. Now, on to how things look across our main end markets. Industrial buyers are examining more carefully the question of how and where they obtain steel as they work through a difficult macro backdrop. Changes in trade policy and the rethinking of supply chains are producing greater demand for domestic suppliers; because inventories are thin throughout distribution channels and certain products are coming back from offshore sourcing, we're finding more opportunities; in our view, these dynamics leave us well placed to deepen relationships with new and existing customers and to keep picking up share as industrial markets settle. Automotive demand is holding firm, with volumes rising modestly versus the year before. Our automotive order book and key customer relationships remain strong, backed by our ongoing emphasis on light truck and SUV transmission programs and our track record of winning new and emerging platforms. As an example, we secured two more programs with existing customers during the quarter, which bolsters our confidence in the strength of the automotive markets we serve and in how much our automotive customers matter to our base business. The energy markets we serve are still cautious, since producers keep looking for more confidence in long-term oil prices before they meaningfully step up investment. Continuing global conflicts and geopolitical uncertainty are adding to volatility in energy markets. Favorable trade-related tailwinds, fewer imports, and a gradual pickup in domestic oil and gas activity are opening incremental opportunities for Metallus. Now on to Aerospace & Defense, which remained a key source of strength in the quarter. Confidentiality means it's always hard for us to identify new defense programs by name. What I can tell you is that we recently received an exciting contract with a new entrant in the defense supply chain to start making tubing for new rocket motors tied to advanced weapon systems. Demand across defense programs keeps growing, which supports our near-term $250 million run rate revenue expectation and the longer-term strategic expansion in the market, letting us bring our expertise to existing and new customers in these critical applications. Although defense shipment timing can shift from quarter to quarter depending on program needs and downstream supply chains beyond our control, the underlying fundamentals stay strong for the foreseeable future; we keep pushing targeted investments and operational improvements to support higher defense volumes. Metallus is well-positioned to benefit from growing defense spending and the continued focus on developing secure domestic supply chains. On the whole, we remain focused on disciplined execution in 2026. During the quarter, we improved operational performance, strengthened our internal systems and safely advanced strategic investments that support our long-term objectives. Our growing order book, improving operational execution, and U.S.-based manufacturing footprint provide a solid foundation as we move forward. Safety, operational discipline, and sensible capital allocation will remain our priorities as we strive for steady results and lasting shareholder value. Having said that, I'll pass things to John so he can take everyone through the financials more thoroughly.

John Zaranec executive
#3

Thank you, Mike. Good morning, everyone, and I appreciate you being on our call for the first quarter of 2026 earnings. Throughout the quarter, our team achieved gains in shipments, net sales, and profitability, both sequentially and compared with the prior year, in line with what we had anticipated. As Mike mentioned, we also moved forward safely with operational and strategic investments meant to support growth in the near term and over the long run, all while keeping our balance sheet strong. Looking at top-line revenue, net sales for the first quarter came to $308.3 million, which is $27.8 million higher than a year ago, or 10%, mainly because of increased shipments across most end markets. Net income for the first quarter was $5.4 million, or $0.13 per diluted share. On an adjusted basis, net income for the quarter was $7.7 million, or $0.18 per diluted share. Adjusted EBITDA for the first quarter reached $24.6 million, up $6.9 million from a year earlier, or 39%. This improved profitability stemmed mainly from higher shipments across most end markets, a better price mix, a larger raw material spread, and improved fixed cost leverage thanks to greater production volume. These gains were slightly offset by higher utility costs and a partial quarter of cost increases tied to the ratified union contract. Keep in mind that our prior favorable electricity contract came to an end in May of 2025. The first quarter of 2025 had a full quarter of lower energy costs. As we mentioned in February, we anticipated using free cash flow during the first quarter, which matches historical seasonality, since the first quarter typically calls for greater pension funding and working capital build. On top of that, this year our CapEx spending to finish the government projects is at its peak in Q1 and should decline over the course of 2026. Capital expenditures in the first quarter came to $24.7 million, which includes roughly $18.3 million of first quarter CapEx, partly funded by the U.S. government. For the full year 2026, planned capital expenditures should come to about $70 million, including approximately $35 million of capital expenditures that are primarily funded by the U.S. government. At the close of the first quarter, the company's cash and cash equivalents stood at $104 million. Turning to government funding, the company received $5.9 million in cash funding from the government during the first quarter, plus another $9.5 million in April, based on our successful completion of key milestones. As a reminder, this money is part of the previously announced agreement of nearly $100 million in funding to support the U.S. Army's mission of increasing munitions production. We expect to receive additional government funding of roughly $2 million in 2026 to finish the government funding arrangements, contingent on achieving the final mutually agreed upon milestone. As a reminder, this funding covered a substantial portion of both the new bloom reheat furnace at the company's Faircrest facility and the new roller furnace at the Gambrinus facility. Now turning to pensions. During Q1, we contributed $19.8 million toward required pension obligations. Most of that went to the U.S. bargaining plan, and it represents about 2/3 of what we expect to pay for all of 2026. After the first quarter ended, we made another required pension contribution of roughly $5 million in April, and we anticipate approximately $5 million more in required contributions over the rest of 2026. Just as we anticipated back in February, the total required pension contributions for 2026 should drop by almost 60% relative to 2025. Under the USW contract that was ratified in Q1, employees currently building up a pension benefit get a one-time window from March 30th to May 30th to stop their pension accrual and start getting a market competitive benefit through the 401(k) plan; these steps let employees tap their retirement funds sooner while also delivering competitive defined contribution benefits and reducing the risk attached to the long-term pension obligation. We're actively managing the pension, and we'll share more updates whenever they're available. On the shareholder return side, during Q1 we bought back roughly 277,000 shares of common stock for $4.3 million. At the close of March, $85.4 million was still available under our current share repurchase authorization. Since we began repurchasing common shares in early 2022, together with the convertible note repurchase activities, we've brought diluted shares outstanding down by a substantial 26%, or 13.8 million shares; these moves show the strength of the company's balance sheet and our confidence in through-cycle cash flow generation. Regarding liquidity, total liquidity stayed solid at $375 million as of March 31st, 2026. Also, as of March 31st, 2026, the company carried no outstanding borrowings. Let's move to the near-term business outlook. On the commercial side, second quarter shipments should rise modestly on a sequential basis, in the low single-digits on a percentage basis, backed by ongoing strength in the order book and normal seasonality. Over the first four months of 2026, we announced a series of targeted price actions spanning our bar and tube portfolios. In bar, we put through two actions adding up to $120 per ton, phased in according to customer promise dates. In tube, pricing actions varied by size and product types, averaging roughly $100 per ton across the product mix. Keep in mind, these pricing actions only apply to business not sold under annual price agreements and to new business, which historically accounts for approximately 30% of our total annual volume. We expect price realization to come gradually, with a bigger impact toward the second half of the year. Given lead times and product mix, second quarter price and mix should be comparable to the first quarter, with improvement expected in the second half of 2026. Operationally, the company expects its second quarter average melt utilization rate to increase sequentially, supported by a strong order book. We anticipate manufacturing costs will get better on a sequential basis by roughly $2 million during the second quarter, driven by increased melt utilization, which leads to better cost absorption and is net of the full quarter run rate cost increase tied to the ratified union contract. Also, for the full year 2026, an adjusted effective income tax rate of between 27% and 30% is what we expect. With those pieces in place, the company anticipates second quarter 2026 adjusted EBITDA will be modestly higher both sequentially and year-over-year. To close things out, thanks go to every one of our employees, customers, and suppliers for their support. As a high-quality, U.S.-based specialty metals producer serving critical markets, we're well-positioned. Moving ahead through 2026, our focus remains on safe execution to satisfy continued rising customer demand. Through disciplined capital allocation and sustained profitable growth, we stay committed to delivering shareholder value. Thank you, as always, for your interest in Metallus. At this point we'd like to open the call for questions.

John Franzreb analyst
#4

Morning, everybody, and thank you for fielding these. My first one concerns what you just reported. During your prepared comments, you mentioned this tends to be a quarter when working capital flows out, yet what caught my attention was how much inventories grew. Does that reflect demand from some specific end market, or is there some other reason you're stocking up? That's what I'd like to understand.

Mike Williams executive
#5

Sure. John, nice to hear from you. Basically, our practice is to accumulate inventory during Q1 in light of what the order book tells us about demand headed into Q2, and since lead times stretch to mid to late Q3 — it varies by product — we have that visibility. The inventory we're putting in place is meant to support our customers, and as we said, demand keeps looking stronger. Compared with a year ago, our order book stands roughly 40% higher, which on a year-over-year basis works out to approximately 90,000 additional tons sitting in that order book versus the same time a year ago. We're building inventory so we can satisfy the order demand on our books.

John Franzreb analyst
#6

Understood. That's encouraging to learn. So, moving in sequence, what you're indicating is that revenue will rise within the low single-digit range. I'm a bit curious — might that point to one of your main end markets perhaps being somewhat slower than you'd have expected, let's say, three months back, particularly given the visibility you possess in A&D?

Mike Williams executive
#7

I don't perceive anything moving slower. It simply comes down to when those orders get placed versus when we must deliver them on schedule to match our throughput capacity.

John Franzreb analyst
#8

All right, that's reasonable. I'll ask one final item and then rejoin the queue. About that $2 million operational improvement, I simply want to confirm I've got the right read on it. Does that gain sit on top of the higher expense tied to the new union contract, or is it net?

Mike Williams executive
#9

Yes.

John Franzreb analyst
#10

When everything is taken into account, does that offset the higher cost?

Mike Williams executive
#11

Yes. The new agreement—the labor agreement—and the added labor costs it brings are already accounted for in that net figure.

John Franzreb analyst
#12

Great.

John Zaranec executive
#13

That's an all-in increase. That's offsetting.

Mike Williams executive
#14

Yeah.

John Zaranec executive
#15

That's offsetting the wages.

John Franzreb analyst
#16

So the wage piece works out to a net benefit of $2 million — I'm just looking to confirm I've got that right.

John Zaranec executive
#17

That's right. That's right.

John Franzreb analyst
#18

Excellent. Okay then. Thanks. I'll rejoin the queue later.

Samuel McKinney analyst
#19

Hi there, good morning.

Mike Williams executive
#20

Good morning, Sam.

Samuel McKinney analyst
#21

Even with that negative SAR comparison, your auto shipments in Q1 rose a bit versus the same period last year. Can you share a little more detail about how you're able to stay ahead of that number, and what the SUV and heavy truck customers are telling you as we head into summer?

Mike Williams executive
#22

Yeah, those platforms are mainly the ones we're on, and demand is being driven by those same platforms, where order volumes have gone up compared with a year ago. At this point, we'd expect that to hold fairly steady through the year, with the usual seasonal pattern showing up late in the year. It comes down to which platforms we're on and the pull rate they're asking for in their build rates for the powertrain and transmission programs we're on.

Samuel McKinney analyst
#23

All right. I'd like to shift over to A&D and the Army investment. Based on what others have said this earnings cycle, it looks like the U.S. Army's munitions partner won't start production at its facility until some point in 2027. What does that mean for your ability to reach the $250 million in annualized A&D sales target you previously set for this year?

Mike Williams executive
#24

Well, it certainly has an impact overall on their reaching 100,000 shells per month in production, and that naturally affects us. What we're observing is that they've ramped up their other facilities, and we've also seen some demand from outside the U.S. — though most remains in North America, just not within the U.S. — along with the inquiries and orders we're receiving from offshore. It does have an effect, but we're working hard to make up for it through other weapon system applications. We talked about the one new program we just won. It will probably reach its full demand in 2027. It'll build up over the course of this year, but the peak cycles will really come in 2027 and 2028. We keep pushing to bring in other programs that can help offset the original planning process tied to the new facility coming online for the specific 155 mm munitions. As I mentioned before, we're seeing greater demand from existing facilities since they're genuinely trying to ramp up. If you run the math, and we sort of figured it out based on what we sell in those specific grades, they're doing about 70,000 shells a month at present compared with their 100,000 target. That's an increase from 50,000, you know, six months back. We expect that as they keep pressing the other facilities to boost their throughput and capacity, it will keep rising modestly through the year. Depending on the timing, when that other facility is up and running, it's a win-win for us.

Samuel McKinney analyst
#25

Alright. Has anything shifted regarding the projection of reaching $250 million in A&D sales during this year?

Mike Williams executive
#26

Nope. That remains our expectation, just as we mentioned in our remarks. Yeah, there's a bit of, you know, fluctuation we're addressing in the back half to close certain holes, since we had been expecting some form of acceleration from that one facility that's still undergoing work to bring it online and running. We remain confident we're going to reach that expectation. Internally, as you might guess, we at least aim higher, but at this point we're confident we'll satisfy that expectation.

John Zaranec executive
#27

That figure relates to what we anticipate on a run-rate basis. What I mean is, portions of it can be somewhat uneven because of supply chain factors and the timing of orders. As we discussed during the prior year, that 250 represents a run rate we anticipate reaching within the year.

Samuel McKinney analyst
#28

Got it. Of course. Okay then. Appreciate it, Mike and John.

Mike Williams executive
#29

Thank you, Sam.

Dave Storms analyst
#30

Can you hear me now? Is this working?

Mike Williams executive
#31

Yes, you're coming through.

Dave Storms analyst
#32

Great, thanks. My apologies for that. I'd like to begin by hearing what you think about lead times. From what I recall, you said they extend into Q3. Given that the bloom reheat furnace is ramping up, is it possible we're at the peak right now, and perhaps lead times will begin declining as the year goes on? Or does the order book suggest they could keep rising?

Mike Williams executive
#33

As things stand, based on everything visible to us — and here we are in early May — we anticipate demand will remain quite strong. We do think the usual seasonal pattern in Q4 will show up, along with our maintenance outage and so on. Yes, at this moment from what we can see, we're midway through Q3. Orders keep arriving at a solid weekly pace, and we believe that will carry on. Our job is simply to stay focused on execution and take care of our customers.

Dave Storms analyst
#34

Got it. Thanks for that. I was also taking a look at the order book, and there's quite a bit of strength in there. Is the growth you're seeing driven more by price — sorry, let me rephrase — is it coming more from price, or is mix playing a bigger role, or should we expect volume to be the main driver? Any color you could give on, say, what the order book looks like in terms of its profile would be helpful.

Mike Williams executive
#35

Sure, so, I'd say on the whole, volume is the driver, all right? That said, our team does a solid job of trying to manage and get the most out of, you know, the mix in terms of maximizing return and value creation wherever we can. The place I think we're seeing — you know, automotive is holding steady. Growth in A&D is still something we anticipate, and the same goes for energy. In energy, we've observed, you know, a favorable uptick tied to the trade landscape and what gets called reshoring, though really it comes down to sourcing supply domestically. We think that could keep expanding, though only modestly. As you'd expect, there's plenty of volatility given all the uncertainty, global conflict, and so on, that's impacting the energy market. That's something we have to monitor very carefully and stay as aligned as possible with our customers on. The largest opportunity area we're seeing for the rest of this year, I'd say, is genuinely steady expansion in the industrial end markets.

Dave Storms analyst
#36

Got it. Appreciate you fielding these.

Mike Williams executive
#37

You're welcome.

Aaron Reed analyst
#38

I appreciate you letting me ask something here. There's one thing I'd really like to know — you said the previous energy contract was running out and that a replacement is in place. Could you share a bit more detail about what that arrangement involves? Would this normally be bought at spot prices, or does it fall under longer-term deals?

Mike Williams executive
#39

All right. A long-term contract we held came to an end in May of last year. Under the contracts we run with now, 70% of the electricity we need is locked in through a two-year agreement — in fact, we're only in months seven through twelve of the first year — and it will remain in force for two years. The remaining 30% gets bought on the spot market.

Aaron Reed analyst
#40

That's helpful. Thank you.

Mike Williams executive
#41

So that's.

Aaron Reed analyst
#42

And.

Mike Williams executive
#43

Yeah, you're welcome.

Aaron Reed analyst
#44

Another thing I wanted to ask about — we noticed new tariffs on automobiles took effect on May 1st. Would you anticipate a significant effect on demand for automotive? I realize that's usually not something we bring in from Europe. There's quite a bit of overlap in what you provide to, but I simply didn't know historically, how did that affect you, and does it offer any clues about how the market may look ahead?

Mike Williams executive
#45

Well, build rate and platforms heavily drive us. Pardon me. Most of our steel uses mainly go into powertrains, especially transmissions, crankshafts, and so on. We've put a lot of emphasis on SUVs and trucks; those are the vehicles that move; that's the reason we're experiencing solid, consistent demand through all of last year amid the market's ups and downs, no matter imports. This year we're observing the same, with gradual gains. What we're noticing is, you know, the shift away from the lofty volumes once expected for EVs, and instead we're seeing greater hybrid demand, which benefits us since it contains a combustion engine and a transmission, plus electric motors. That's roughly the shift we've witnessed. I believe it still suits us well because we can compete across all three of those platforms, ICE, hybrid, or EV. I think we're positioned nicely. Our team has done a fairly solid job pursuing the right applications where usually the consumer price impact isn't as swayed by price changes, since these are generally all high-end vehicles.

Aaron Reed analyst
#46

That's really useful. Thanks. I'll hand it back over.

Jennifer Beeman executive
#47

Wonderful. Thanks a lot. That wraps up today's call.

Operator operator
#48

Thanks once more for being with us. That brings today's conference call to a close. You're free to disconnect at this point.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Metallus Inc. transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to Metallus Inc. earnings transcripts and 132,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.