Metallus Inc. (MTUS) Earnings Call Transcript
August 4, 2026
Earnings Call Speaker Segments
Hello everyone, and thanks for joining Metallus' conference call for the second quarter of 2026. I'm Jenna Johnson, and I serve as Senior Manager of Finance and Investor Relations here at Metallus. With me on the line today are our Chief Executive Officer, Mike Williams; our President and Chief Operating Officer, Kris Westbrooks; and John Zaranec, our Executive Vice President and Chief Financial Officer. Our press release went out yesterday evening, and you ought to have it in hand by now. We might discuss forward-looking statements on this call, as the SEC defines them. A range of factors — which we lay out in more detail in yesterday's release — could cause actual results to differ materially from what is projected or implied. Please take a look at our SEC filings, among them our most recent Form 10-Q, which we will file later today, plus the risk factors contained in our earnings release; all of these can be found on the Metallus website. When non-GAAP financial information comes up, further specifics and reconciliations to the comparable GAAP figure appear in the earnings release and in the earnings presentation, which you can find on the investor page at metallus.com. Now I'll hand things over to Mike Williams for his comments.
Thanks, Jenna — and I appreciate everyone being here with us today. During the second quarter, our adjusted EBITDA came to $29 million, which means profitability got better on both a sequential basis and compared with the same period a year ago. That aligns with what we told you to expect earlier in the year. The gains came from shipping more product, using our melt capacity at a higher rate, better pricing and an improved product mix, along with strong operating performance. We kept seeing the advantages of solid demand throughout our end markets as well, since our order book rose by more than 50% versus a year earlier, which gives us clear visibility as we move into the back half of the year. What we delivered in the second quarter shows the headway we keep making on our strategic priorities, and it highlights how strong our current and diversifying end markets and customer relationships are. When 2026 began, we had a straightforward focus: boost profitability compared with the previous year by executing consistently, achieving commercial excellence, and driving operational improvement. How we performed in the first half shows the headway we're making toward that goal, while safety stays our number one priority at Metallus. Through targeted training, better tools, and greater accountability, we keep reinforcing our safety culture throughout our facilities. We're also still achieving substantial progress on our strategic capital investments, and early signals indicate these efforts are set to produce meaningful commercial and operational gains down the road. Our bloom reheat furnace finished commissioning in early July and is making process consistency better, improving downstream product flow, and raising reliability across the facilities. Those gains are driving stronger operational execution and setting us up for bigger throughput and productivity improvements. Meanwhile, commissioning of the roller furnace is still on schedule and moving ahead as planned. Once fully up and running, these investments — which received partial support through U.S. government funding — should enhance throughput, quality, efficiency, and service levels for our customers. Taken together, they mark an important move forward in bolstering Metallus' manufacturing capabilities, improving our capacity to serve critical aerospace and defense programs, and boosting our ability to satisfy rising customer demand in the industrial, automotive, and energy markets. In the third quarter, we're eager to celebrate these investments at our ribbon cutting ceremony and to welcome representatives from the U.S. government, key defense customers, and industry partners as we recognize this significant milestone for the company. The event will showcase the successful partnership between Metallus and the U.S. government in backing the defense industrial base. Robust customer demand and a backlog that keeps growing give us confidence as we start the second half of the year. Lead times for our engineered SBQ bar and seamless mechanical tubing products have stretched into late fourth quarter 2026, which reflects healthy demand across every market and continuing inventory replenishment activity. Now turning to the end markets: our diversified end market portfolio keeps delivering balance through market cycles while opening opportunities for profitable growth and greater participation in appealing, expanding markets. Automotive stays a core market for Metallus and a key contributor to our long-term growth strategy. Auto shipments in the second quarter were up 12% sequentially and 8% year-over-year. Looking at our targeted light truck and SUV applications, demand has held firm, which speaks to the worth that our long-standing customers assign to the quality we deliver, our technical know-how, and our dependability. We're excited to share as well that we've landed a new multi-year award involving ring gears for a top automaker's hybrid transmission platform. We expect production to kick off in 2028; this win shows once more how we can capture strategic business on key vehicle platforms, and it puts Metallus in position to gain from rising hybrid vehicle adoption. Industrial shipments during the quarter slipped modestly on both a sequential and year-over-year basis as we balanced customer needs against the timing of orders and shipments, yet industrial markets are still robust and make up one of the biggest slices of growth in our order book. Our industrial backlog has grown to almost twice what it was a year earlier, giving us solid visibility into demand ahead. We're eager to serve our customers and satisfy the rising industrial demand in the second half of 2026 as we push forward with our operational improvements and asset throughput initiatives. Turning to energy, demand has stayed consistent even with a cautious environment for capital spending. Although geopolitical and commodity price uncertainty has softened activity levels, diminished import competition and strengthening domestic production are underpinning demand for our seamless tubing products; these market conditions are helping us improve utilization of our seamless tube assets and open up further opportunities going forward. Aerospace and defense continues to be among our most compelling growth opportunities, and that momentum showed clearly in the second quarter, when we shipped record tons and posted record sales for these products. New defense initiatives along with replenishment efforts on existing programs keep supporting demand, fueling backlog growth. This momentum underpins our confidence in reaching our targeted $250 million revenue run rate and underscores the increasingly vital role Metallus plays in serving critical defense markets; we were also glad to earn AS9100D certification during the quarter, a key and widely acknowledged quality standard in the aerospace and defense industries. With this certification, customers gain added assurance in our capacity to deliver the quality, reliability, and consistency that mission-critical applications demand. It likewise bolsters our competitive standing, backing our VAR growth strategy and widening opportunities in high-value markets. I want to congratulate our team on this achievement. Securing the AS9100D certification took a major cross-functional effort that demanded dedication, collaboration, and discipline throughout the organization. Above all, it mirrors the culture of continuous improvement and operational excellence that is woven into every part of Metallus. To wrap up, Metallus today is a stronger and more resilient company than it was only a few years ago. We continue to keep a strong balance sheet, lift our operating performance, invest in key manufacturing capabilities, deepen partnerships with existing customers while widening our customer portfolio, and sharpen our focus on the most attractive opportunities within the specialty metals market. Our priorities remain clear: operate safely, serve our customers reliably, execute our strategic initiatives, and deliver sustainable value to our shareholders. I take pride in what our team accomplished during the second quarter, and I'm encouraged by the opportunities ahead. Having said that, I'll now hand things to John so he can walk us through the financial results for the second quarter in greater depth.
Thanks, Mike. Good morning, everyone, and I appreciate you being on our Q2 2026 earnings call. Over the quarter, our team achieved gains in shipments, net sales, and profitability, both sequentially and versus the prior-year period, which was in line with what we had expected. As Mike mentioned, we also moved forward safely with operational and strategic investments meant to drive growth in the near and long term, all while keeping our balance sheet strong. Looking at top-line revenue, net sales for the second quarter came to $341 million, which is up $36.4 million, or 12%, from a year ago, mainly because of higher shipments in aerospace and defense and automotive. Net income in Q2 was $8.9 million, or $0.21 per diluted share; adjusted net income was $11.1 million, or $0.26 per diluted share. Adjusted EBITDA for the second quarter reached $29 million, an increase of $2.5 million, or 9%, compared with the same period last year. That higher profitability came largely from better prices, improved mix, and greater shipments, partly offset by manufacturing performance, since melt utilization got better but did not meet plan enough to fully counter the known rises in energy cost and the first complete quarter of labor tied to the recently ratified union contract. Operating cash flow in the second quarter was $12.8 million, thanks to profitability and reduced inventory, partly offset by higher accounts receivable at quarter end from greater sales and lower accounts payable because of the timing of raw material purchases. Capital expenditures in Q2 were $15.2 million, including roughly $9.5 million for projects mostly funded by the U.S. government. As we have said before, planned capital expenditures for all of 2026 should be about $70 million, which includes approximately $35 million of capital expenditures primarily funded by the U.S. government. At the close of the second quarter, the company's cash and cash equivalents stood at $108.6 million. Turning to government funding, in Q2 the company got the last $11.3 million of cash funding from the U.S. Army. Keep in mind, this money is part of the previously announced nearly $100 million funding agreement supporting the U.S. Army's mission to boost munitions production. That funding largely covered both the new bloom reheat furnace at the company's Faircrest facility and the new roller furnace at the Gambrinus facility. Moving to pensions; in the second quarter, the company made $5.4 million in required pension contributions for the U.S. bargaining plan. According to our updated actuarial analysis, no further pension contributions are anticipated for the rest of 2026. As a reminder, our 2026 pension contributions are more than 60% lower than in 2025. On shareholder return activities, in Q2 the company bought back about 190,000 shares of common stock for $3.6 million. At the end of June, $81.8 million was left under our existing share repurchase program. Starting with when we first began buying back common shares in early 2022, and adding in what we did with convertible note repurchases, diluted shares outstanding have come down by 26% — that's 14 million shares. Those moves show how solid the company's balance sheet is and how confident we are in generating cash flow across the cycle. On liquidity, as of June 30th, 2026, the company completed a refinancing of its asset-based revolving credit facility and pushed the maturity date out to June 2031. Following that amendment, committed capacity under the credit facility stands at $300 million. Under the new agreement, the optional credit facility expansion feature rises to $200 million, and there are also multiple enhancements to other financial terms and covenants, among them lower annual fees. This refinancing gives us room to pursue our strategic initiatives, since total liquidity as of June 30th, 2026 remains robust at $395 million. When the second quarter ended, the company carried no outstanding borrowings. Now to the near-term business outlook. On the commercial side, third quarter shipments should look much like the second quarter, given customer mix and lead time expectations. For bar and tube products, lead times presently stretch into late in the fourth quarter. With lead times and product mix in mind, third quarter price and mix should come in a bit above the second quarter. The company just announced price increases taking effect in early August for customers who aren't covered by annual pricing agreements: $60 per ton on bar, $100 per ton on carbon seamless mechanical tubing, and $160 per ton on alloy seamless mechanical tubing products. Given lead times, the company anticipates capturing the full run rate benefit from these price increases starting in 2027. Operationally, the company foresees a modest sequential rise in its third quarter average melt utilization rate, helped by a strong order book. Manufacturing costs should stay roughly level in the third quarter, since somewhat higher melt utilization gets offset by more planned maintenance outages. For the full year 2026, an adjusted effective income tax rate between 27% and 30% is anticipated. With all of this in mind, the company expects third quarter 2026 adjusted EBITDA to be a bit above both the prior quarter and the prior year, in line with the message we've carried all year about profitability rising every quarter. To close, thank you to every one of our employees, customers and suppliers for their support. What we accomplished in the first half of 2026 shows our standing as a high-quality, U.S.-based specialty metals producer serving critical markets. As we keep moving ahead in 2026, our focus is on safe execution to satisfy continued rising customer demand; we stay committed to delivering shareholder value through disciplined capital allocation and sustained profitable growth. As always, thank you for your interest in Metallus. We'd now like to open the call for questions.
Morning. Appreciate you taking my questions.
Morning, Dave.
Good morning. I'd like to begin by clarifying the price hikes; it sounded as though the full run rate will show up in 2027. I just want to make sure — that applies to the 30% of your order book that isn't under contract, right? That's the spot price share of your order book?
Yes, that's right.
All right, that makes sense; so sometime around 2027 or 2028, we'd see those step-ups apply to the locked-in share of your backlog, if that's a reasonable read. And I suppose the broader thing I'm after is, where do those talks stand right now? Do your customers tend to take it well and grasp the conditions the economy is facing? Or is there some subtlety in there we ought to know about?
Well, here's the thing — every one of those conversations with our customer stays strictly confidential. We genuinely don't go into detail in public about how they're progressing. Truthfully, they really haven't gotten underway at this point. There have been a few early talks. Let me also add one caveat. Whether we could forecast what pricing will be in 2028, I'm not so sure. On 2027, though, I'll say this: demand has picked up over this year, and that in turn pushes utilization higher and, in turn, can make the market more willing to accept higher prices. That's what we've witnessed during the year so far. It sets up a starting point, or a baseline, for negotiating prices for 2027, and that sort of thing tends to lean positive. Where 2027 lands is still very much up in the air. Once there's more clarity, we can likely say a bit more about it near the beginning of the first quarter, when we go over the fourth quarter results.
Got it. That makes total sense. Sounds like that's my signal to step aside. I'll rejoin the line later. Appreciate it.
Thank you, Dave.
Hey, good morning, guys.
Morning, Sam.
A&D sales rose quite a bit in Q2, and that works out to roughly $240 million on an annualized basis — fairly near the target you'd talked about before. I've got two things to ask: first, could you share more about what mainly fueled that quarter-over-quarter revenue gain? And second, do you think you'll reach a $250 million annualized run rate during Q3?
Yes. What I'd point to is a mix of factors behind the sales increase. Demand keeps climbing for 155 mm munitions, plus other munitions as well. On top of that, you've got the fresh programs we've won, and we're beginning to watch that demand come through. Those are the things that truly powered the Q2 step-up. Our expectation is that this keeps getting better across the coming year, since more and more of those new programs are raising their production capacity, and we're positioned to provide for them. That has us fairly enthusiastic, and we keep pursuing additional programs that might bring chances to scale up during 2027 and 2028.
Okay.
Regarding how much of the melt was used in Q2— I'd like to make one point, Sam.
74%. Oh, right. Please continue.
Prior to you posing that query, I simply wanted to verify the final portion of what you asked. Indeed, what we anticipate is that we will hit that $250 million — no less than that $250 million run rate — before this year concludes.
Okay. By the end of the year?
Yeah.
All right. Melt utilization for the second quarter came in at 74%, a modest increase from the first quarter, yet it appears your expectations were set somewhat higher than that 74% figure. Could you give us additional granularity on the reasons melt utilization rose by less than anticipated across the quarter?
Yes. A portion of this relates to power disruptions under our interruptible supply agreement. Even more significant, though, it truly boils down to how well we execute on the shop floor along with the dependability of our maintenance; going into Q2, we had anticipated stronger advancement on that front. Positive movement did occur, just not to the degree we had planned for. That largely shaped how we guided what we believed manufacturing costs would be. This is arguably our single largest opportunity to push additional cost improvement, and the new strategic investments being made in these assets will assist us in getting there too. My sense is we're headed in the right direction. The trend is with us. I believe we also guided that utilization should rise in Q3. To add the caveat that Q4 is the period when our very large maintenance outage takes place. All of our efforts, everything we're concentrating on with regard to shop floor execution, our strategic and tactical investments, revolve around reliability and elevating how we execute on the shop floor.
All right. Understood. Thanks, Mike.
Thanks, Sam.
Great. Thank you. Yeah, I just want to briefly touch on the backlog and the industrial doubling. Could you share additional detail on which subcategories or sectors are chiefly fueling that demand at present?
Well, the top one is truly the industrial base supplying the yellow goods market. Construction and mining equipment are really what's powering it. Then you add in certain other pockets of improvement — a small amount of ag, a small amount of rail. That's mainly it; honestly, most of it originates from the yellow goods sector.
All right, that's clear and useful. For my next question, I wanted to ask whether you've gained additional visibility, now that 2027 is getting nearer, regarding how revenue from the A&D sector will be spaced out. I realize that can be somewhat uneven at times. I was curious whether things became somewhat clearer later in the year.
There are many factors beyond our control, since we serve as a supplier of primary materials for those specialty metal uses. What we're observing is that the munitions sector is using existing capacity at higher rates, and new players are entering that sector too, which is where demand is picking up. We'll likely have a far clearer view early next year, when we work through our annual contract talks. Almost none of these parties operate on spot arrangements. It will also be helped by several program awards we're currently pursuing to lock in for 2027 and afterward. At the moment it's somewhat unclear. We do anticipate munitions demand will keep rising through next year, since that matches their forecasts. Essentially, it all hinges on those new programs we're bidding to secure for 2027.
That's helpful. Thank you much.
Thanks, Aaron.
hello all, and I appreciate your time for the Q&A.
hello there, John.
I want to go back to the maintenance downtime you're anticipating for the third quarter. Could you give us some detail on what you're doing and how it might affect results in Q3?
Yes. Usually, our downstream asset maintenance that isn't bottlenecked is what we do. It's generally a couple million dollars during the quarter; all of it is planned maintenance. It isn't unplanned maintenance. We know very well what those planned costs will be, and that's the reason we guided to that effect in Q3.
Sure, John, that happens on a quarterly basis; it’s just that Q3 has a bit more of it compared with Q2.
Understood. Did that come about because — it sounded as though perhaps your maintenance goals weren't reached during Q2, and you're now mapping that out for Q3? Is that the right way to interpret it, or not?
No. Our usual maintenance spending occurred in Q2. Even so, it wasn't the spending we'd normally planned, yet we anticipated a greater level of utilization to make up for it, and that didn't completely happen.
John, it's Kris here.
Understood.
The efforts we're undertaking in Q3 were carefully mapped out 12 months in advance; we've been engaged on those strategies for the tube mills and thermal treat assets, and completing that within a week and bringing it back into operation will be what we concentrate on in Q3.
Understood. So, regarding a couple of the end markets, has anything shifted in your expectations for the automotive segment between the first half and the second half? In the same way, I'd like to hear your thinking on the energy side. Given all the pricing and the opportunity that exist out there, I'd simply assume it would be somewhat more robust. For you, that doesn't appear to be the situation.
Yes, when it comes to automotive, you need to consider which platforms we participate in; our presence is in the SUVs and the trucks.
Alright.
For us, that's been a solid situation. My read is that the step-up in shipments between Q1 and Q2 came down largely to timing. For the platforms we serve, our expectation is essentially level demand. That matches the forecast, and it's what we've factored in. Relative to passenger car platforms, those platforms have held up well. That's our expectation. When you look at the build rates they're projecting for the year, they're up a little versus last year, yet more or less consistent with what they had projected for this year. A major uptick isn't something we're seeing, though we'll find out as things unfold. Should they ask for it, we'll work out a way to deliver it. John, what did the second half of your question cover? Energy.
I have comparable views regarding energy.
Indeed. The energy sector tends to swing quite a bit, yet I'd note that, yes, demand and opportunities there are getting better. A modest rise in U.S. drilling activity is a major factor behind that, and the tariff situation on trade also benefits us on that front. We observe these domestic and global energy firms aiming to lock in more supply from within the country rather than depending on a worldwide supply chain to meet their requirements. That's the pattern we're noticing.
All right, thanks, everyone. We’ll rejoin the queue.
Appreciate it, John.
Thanks once more. I'd like to ask a brief follow-up regarding aerospace and defense. A few times you noted that some new program awards had come in there. I'm just wondering, with this new AS9100D certification, will that bring about new awards, or is it already doing so? Or is it really just table stakes? Any additional detail on that would be useful.
So what that certification does is confirm and validate how disciplined our quality management system is, along with how we execute on the shop floor, so that we meet those extremely stringent quality requirements. From a customer perspective, what it means for us is — we received it not long ago and made the announcement not long ago. It's a capability we can market, and it widens the pool of customers and applications we're able to serve. Our expectation is that this will widen our opportunities within the A&D space to win more business and keep growing that highly attractive end market for us.
Got it. I appreciate you giving me the chance to ask a follow-up.
Thank you, Dave.
Thank you for joining us today. That concludes our call.
This concludes today's call. Thank you for attending. You may now disconnect.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Metallus Inc. transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Metallus Inc. earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.