SKF India Limited (500472) Earnings Call Transcript
February 13, 2025
Earnings Call Speaker Segments
Good morning, ladies and gentlemen, and welcome to the Q3 FY 2024 to 2025 earnings conference call of SKF India Limited. So that the meeting runs smoothly, every participant is currently in listen-only mode. After the formal presentation, there will be a short question-and-answer session. If you require assistance at any point during this call, simply press star followed by zero on your touch-tone phone. Please note that this conference is being recorded. At this stage, I would like to hand things over to Mr. Ashish Pruthi, Head of Marketing and Communications at SKF India Limited. Thank you, and the floor is yours, sir.
Good morning, everybody, and thanks for being with us today. Joining us are SKF India's Managing Director, Mr. Mukund Vasudevan; our CFO, Mr. Ashish Saraf; and our Legal Director, Company Secretary, and Compliance Officer, Mr. Ranjan Kumar. Before handing the call over to management, I'd like to remind you that some remarks on this call include forward-looking statements, which carry risks and uncertainties, and actual results could differ materially. Those statements rest on management's beliefs and on assumptions made by management and on information currently available to it. Listeners are advised not to place undue reliance on these forward-looking statements when making investment decisions. Today's call is meant purely to educate and create awareness regarding the company's fundamental business and the financial quarter under review. We can now open the call for Q&A.
Thank you very much, sir. We'll now start the question-and-answer session. Anybody who wants to ask a question can press star and one on the touch-tone phone. Should you wish to take yourself out of the question queue, you may press star and two. We ask participants to use only handsets while asking a question. Ladies and gentlemen, we'll wait a moment while the question queue assembles. Our first question comes from the line of Mumuksh Mandlesha from Anand Rathi Institutional Equities. Please go ahead.
Yes. Sir, thank you for the chance and for hosting this call. So first, on a wider scale — at the global level — a split between auto and industrial is taking place. I'd just like to get a sense of the thinking behind that separation, what sort of benefits you foresee over the medium to long term, whether in the form of new products or plenty of opportunities, and also how much the margin profile differs for each of these divisions once they are carved out.
Mukund Vasudevan here, Managing Director. I'll do my best to give you an answer. Clearly, the separation is a step we see as correct for this company, for customers, and for investors. The reason is that these are two businesses that differ fundamentally. We've run them relatively independently, yet we think splitting them into two standalone companies will generate extra value for everybody. Let me walk you through why. First, looking at it from the customer angle, the customers really are different. As you'd expect, one is automotive, with plenty of automotive OEMs, where the solutions offered involve a longer sales cycle, though those solutions are sticky, and addressing that market demands a different form of innovation. Industrial, by contrast, has far more segments and far more verticals, and each of those calls for a different type of innovation along with, typically, a shorter sales cycle. On the manufacturing side as well, automotive means much greater volumes, with batch processing at considerably larger volumes in continuous manufacturing, while industrial typically runs smaller batch sizes — not every segment, but typically — and what matters most there is quicker changeover times plus flexibility on the manufacturing line.
Capital allocation is the third point as well. Broadly speaking, the margin profile in automotive runs somewhat below the industrial side, which reflects the character of that industry, and we likewise think having two standalone companies will make capital allocation far more efficient. And finally, the outlook for these two industries differs somewhat too, in that automotive is heading toward EVs at a quicker pace in many regions than in others, while industrial is shifting toward sectors, including sunrise areas such as renewables. So all of these changes, in my view, can be handled more efficiently by two separate companies.
Understood, sir. And sir, regarding products specifically, with the division now in place, how do you view broadening the lineup beyond what we currently offer, sir? Do you expect that to unfold over the medium term, sir?
We're going to keep growing that product line. It's not as if it hasn't been growing already. The expansion will carry on. What I'd say is this: it gives us a chance to genuinely innovate more and bring in additional products tailored to the industries we're aiming to serve.
Understood, sir. And sir, you brought up auto margins coming in lower. In India, though, sir, our auto business leans more toward manufacturing, whereas industrials carry a substantial traded share. So in India as well, sir, do you expect the auto margin to sit below the industrial one, sir?
So, once more, turning to Ashish Saraf, who serves as CFO at SKF — when you examine the carve-out financials, the mix, as you correctly pointed out, differs. At present, automotive stands at 95% localized, while industrial sits at roughly 40% localized, correct? So given that differing mix, the margin derived from the carve-out financials that we submitted recently will end up being very similar across both companies. Once again, that comes from the analysis we carried out on historical results, and to build on what Ashish mentioned, on a global basis, what I said was that industrial margins have a tendency to run higher. Within India, since traded products make up a larger share in industrial, it comes in somewhat lower. Over the long term, however, with more localization, we anticipate that this will normalize.
Understood, sir. And sir, in India you also have SKF Technologies as the listed entity. I just want to get clarity on whether that will stay outside the listed entity or whether it too will be merged into the industrial part of the business, sir?
Right now, merging that isn’t planned. Both entities keep operating separately — meaning one technology center will handle industrial, and another technology center will handle automotive. But as of now, there’s no intention to combine them. There’s a great deal happening just with the initial separation. So that’s not being looked at at this time.
Understood, sir. Now, regarding the Q3 quarter results, gross margin contracted by roughly 600 basis points year over year. Could you just walk us through why that decline happened? And I'd like to get a sense of whether there's any common thread in the gross margin? Also, how do you view Q4 as far as this gross margin is concerned, sir?
When you look at the results for the quarter we're in, as you correctly pointed out, our overall margin declined roughly 4.5% versus the same period a year earlier. A key factor behind that lower figure was the elevated cost of traded products, correct? We had anticipated a degree of rationalization in traded products between Q2 and Q3. It has rationalized somewhat. That's the reason, if you examine our margins on a quarter-over-quarter basis, they have improved slightly. We expect a bit more improvement as we head into the next quarter, right? So you ought to see additional rationalization in traded product costs as we move into Q4 of this financial year.
Let me make sure I have this right, sir — essentially, with traded products, the difference comes down to pricing between the end market and the sourcing prices, correct? That's where the margin differs. And then, basically, that temporary margin loss gets made up over the quarters ahead. Is that right, sir?
Correct, yes.
Understood, understood. And sir, regarding revenue, this quarter has posted quite strong growth at 15%, and across nine months it has risen by 10%. Could you help us out? How has growth looked across the subsegments? And would you also share your views on the outlook for the main segments — wind, railways, general machinery, and aftermarket?
I apologize—could you repeat the second half of what you asked? Would you mind sharing it?
Yeah.
Regarding our outlook.
Now let's turn to the outlook. All right. A few important industrial segments.
I'll let Ashish add to this as well, but first, let me begin with a few of the industrial segments. Across industrial, nearly every segment performed quite strongly, with notable standouts in distribution, heavy, metals, and renewables — all of which did very well this quarter. Some of those, like renewables, come in as lumpy orders, but on the whole, it got done. Distribution really stood out. Also, general machinery — sorry — came back strongly this last quarter. General machinery covers motors, pumps, that sort of thing, gearboxes. Automotive also performed well. I think automotive overall was 10%.
Yeah.
10%. And inside that, two-wheelers and passenger vehicles both performed well. Commercial vehicles, less so. As for the outlook, I'd say it remains strong, mainly on the back of infrastructure spending, which at least for the upcoming quarter, right, longer term with a shifting economy or global geopolitics, I'm perhaps less certain. But at least for the present quarter, infrastructure spending will keep driving some of metals, heavy industry, and so on. And general machinery distribution will stay strong. On automotive, I think two-wheelers will remain strong. Passenger vehicle is somewhat seasonal. So I'd say that's the outlook for the next quarter, at least.
Understood. On the growth figure, could you break out how the industrial aftermarket, the auto aftermarket, and the industrial segments performed — specifically wind growth and railway growth, sir?
Okay, let me begin with a segment breakdown, then I'll cover the key subsegments inside each one. For this quarter, industrial was up roughly 23% from a year earlier, while automotive came in at about 10%, correct? Within industrial, the distribution business delivered strong growth of roughly 20%, general machinery roughly 23%, wind roughly 16%, and rail and defense roughly 23%, right? That covers the industrial side. Turning to automotive, once again on the aftermarket side we posted strong growth of roughly 18%. Two-wheelers rose roughly 10%+, passenger vehicles 11%, and the tractor business roughly 30%+. Those were the year-over-year growth figures.
Understood. So that's very strong growth. Are you picking up some market share, or is a lot of it also down to the strong underlying market, sir?
It's a combination of both, correct? In certain segments, we're picking up market share. Take two-wheelers, for instance — we keep gaining share with customers such as Bajaj and Honda. Whether it's the vehicle market, the vehicle aftermarket, or industrial distribution, our ability to reach end customers keeps improving. On the industrial side, we're continuing to bring on new industrial part sellers and to engage new ADs across the market, both in vehicle aftermarket and on the industrial side. That's helping us grow considerably and gain share in the aftermarket business. On the general machinery side, we keep raising our market share with existing OEMs, and we're also directly onboarding many more new OEMs. That's helping us grow the market in the general machinery business. Wind and railways, I'd say, are more seasonal and cyclical. They depend more on the orders we have in hand, and that's where you're seeing strong growth in Q4.
Understood, and sir, we did have that earlier move of some plant capacity from Korea over to India. Has that also begun to contribute revenue in the current quarter, sir?
Could you ask that again? It isn't very clear.
Yes. As we talked about previously, we recently moved a few machines from our Korea plant over to India. Is there any revenue coming from that, sir — from that business?
My understanding is that the handover is still underway — and again, feel free to correct me on this — but as far as I know, that transfer remains in progress. Getting it to the point where production begins will probably require a couple of quarters.
Understood, sir. I really appreciate the chance. I'll get back to you. Thanks.
Thanks. The next question comes from Mukesh Saraf of Avendus Spark, on the line. Go ahead, please.
Hi there, yes, good morning, and thanks for giving me the chance to ask. First off, could you break out that revenue mix for us? You touched on the growth for each segment and so on, but what about the split between auto and industrial, and within each of those, the OEM versus aftermarket?
Okay. So taking a look at the total sales mix for this quarter, industrial comes in at roughly 54%, auto sits at 39%, and exports are approximately 7%, correct? And inside industrial — or really overall, I'd say — industrial distribution accounts for about 24%, while vehicle aftermarket makes up roughly 12%.
Okay, so you filed that scheme of arrangement with the stock exchanges. Looking at it, industrial revenue is shown as 63% of revenue in F24, but in what we've said over the last few quarters, and even this quarter, we're putting it at roughly the 50%-54% mark. So can you help us understand that gap — the 63% versus the 50% you've broadly been citing on the industrial revenue side?
Yeah. Yeah. So right now, looking at our automotive business, our tractor business, which is mostly agriculture and electricals — once the separation basically happens, that business, which we currently report under automotive, will move over to industrial, because in India we've been reporting these numbers under automotive. Globally, agriculture and electricals sit within industrial. So after separation, we'd transfer that business to industrial.
Got it. But will the production of those bearings shift into industrial as well, or is it just the sales side that moves over to industrial?
And we did the manufacturing split as well, precisely. But the moment we get some details on that or have clarity regarding it, we'll walk you through it. We'll communicate that to you, more or less. Still, as of today, I'd say we have multiple options available to us — whether that means moving the manufacturing assets over to the individual companies, the split companies, or having one company manufacture on behalf of the other. Both remain open options. So we're still assessing these to determine what makes the most sense.
Understood, understood. And in one of the comments, you mentioned that 95% of auto is localized while 40% of industrial is localized. That 40% of industrial being localized — is that within the listed entity, or does it also take in the unlisted business?
No, at the moment we're only talking about the listed one.
Alright. So 40% of industrial is already localized within the listed business — understood. And then just one last thing: we're noticing new capacity being added by competitors for localizing SRBs and CRBs, particularly to serve the industrial segment. Clearly, we too are pursuing more and more localization, but do you expect that in the near term there could be some pressure on either market share or pricing, given all the new capacity that's coming up in industrial?
So of course, we know this is taking place. And we’re doing as much localization as we can—whether that’s within the listed entity or the unlisted one, right—which will simply make us more competitive. So I’d say we keep working on this continuously, and you’ll see additional announcements on these matters going forward.
Thanks.
Mr. Saraf?
Yep.
Is there anything else you'd like to ask?
Nope, happy to answer that myself. Thank you.
Thanks. We’ll move on to the next question, which comes from Harshit Patel of Equirus Securities on the line. Please go ahead.
Thanks so much for taking the question, sir. Sir, again on margins, right, I just wanted to get a bit more clarity. Previously, there would be a single instance where some transfer pricing adjustment happened, and as a result, it would be normalized on an annual basis. But this seems to be occurring quite often over the last few quarters. So could you shed some light on whether something structural has shifted there?
Okay, so let me walk you through this. Harshit, if you go back over the past couple of years — that's financial year 2022, 2023, and then 2023, 2024 — we took a lot of price increases with our customers, and that was because of the inflationary environment we were dealing with. But when we come to financial year 2024, 2025, most of the growth you're seeing this quarter, as well as in the two quarters before it, has come predominantly from volume growth, and not so much from the price increases we've been able to secure with our customers. So because of that, there's been some pressure on our margins, which in prior years had allowed us a better margin on our traded products through the price increases we were taking. To give you an example, for financial year 2023 to 2024, my traded margins were hovering close to double-digit, whereas in this financial year, my traded margins are lower than expected. So, as I explained earlier, we're expecting some more rationalization to happen in the last quarter of this financial year, but they're not expected to be close to double-digit.
Those will align with the way transfer pricing is practiced, since pricing in our end markets has stayed fairly steady across this financial year. I hope that clears it up for you.
Yes, sir. My understanding earlier was that regardless of what the final price turns out to be, our total distribution or traded margins would land somewhere in the mid-single digit range. Should margins come in higher or lower, that difference would be passed along to the manufacturing entity from whichever source we procure from. So isn't that the case? Is there a flaw in that understanding?
There's a small gap there. You're correct that when margins come in below the mid-single digits, a catch-up would apply. However, should margins end up higher, right, FEMA rules prevent us from recovering the difference by sending a debit note to a supplier, right? So generally, when margins turn out higher — which is what happened over the last two financial years — you typically wouldn't be able to give that back to the manufacturer, right? That's exactly where we ended up with a higher margin on traded products in the last financial year than there should have been.
Sure. So inside that shell, we got those margins back over the last 2 quarters, correct?
Like I mentioned, it isn't as though we gave those margins back. During this financial year, margins have stayed fairly steady, consistent with transfer pricing rules. In earlier years, since we were receiving additional price increases from customers, we could produce a bigger margin, and because we needed to return that within the very same financial year but were unable to do so, the company ended up keeping a larger margin, since we can't issue, as I noted, credit notes or debit notes to our suppliers, correct, given that these involve foreign exchange transactions.
Yes, sir, got it. On the wind side, though, my understanding is that we did some pruning of customers in that segment, so growth took a hit in the first quarter of FY 2025. What's the latest on that front in the second and third quarters? And how much of our revenues, as a percentage, came from the wind segment during the first nine months of this year? If you could also share some detail on profitability in that segment, that would be very helpful.
I'll have Ashish discuss profitability and the share of revenue coming from wind, but on the subject of pruning customers, that's an ongoing effort — when we spot something that isn't profitable, we ask ourselves what to do about it. Do we raise prices, or do we decide we don't want to compete in that market? That said, the situation keeps shifting, because with manufacturing that's more localized, looking into alternate sources, different solutions for the customer, and adding more value through innovation, we sometimes re-enter that space. So I think the growth we saw in the wind segment this quarter reflects some of those moves. We regained some of that business at an improved margin, since the customer recognizes the value we deliver. But even so, there are still some accounts we haven't won back. On the percentage of business, go ahead, Ashish.
Regarding wind's portion of our business, on the whole it keeps hovering around 4%-5% of the total. As for margins, once we pruned the portfolio, wind margins turned clearly positive, and they remain somewhere in the mid- to high single-digit range when you look at wind margin for the business overall.
I appreciate you taking my questions, and I'll follow up with the team afterward.
Thanks. Our next question comes from Viraj at SiMPL. You have the floor.
Yes. Hello there. Am I coming through clearly? Hi?
Yes, sir. Please go ahead.
Yeah. Just a few questions. First, I was hoping to get a bit more clarity on how gross margin is being affected. If I look back over our history across the last 12 years, right, and if I sort of back out the traded margin business, the traded margin business, apart from 1 or 2 years in 2020 and 2021, has never gone below a single digit margin. It's consistently been around 13%-14% off. If I had to put it in a band, it's been roughly 9%-10% up to, in one of those years, even 20% upwards. So I'm still not quite able to grasp, when we sort of look at the traded business portfolio and traded business margin, what exactly that impact is. What is it that's driving the impact on the business?
Once more, I can't quite grasp what you're asking, but like I mentioned, the margins on traded goods have, as I said, been sitting at certain levels across earlier fiscal years. Those margins used to be bigger, correct? They came near to double digit, while in this fiscal year they've normalized down to mid-single digits, right, which fits the pattern. When you consider our long-term margins for traded products, in a stable climate they've stayed within that band, correct? And that's essentially the level things have returned to.
Just to clarify, sir — when you mention margins in the mid-single digit range, are you referring to the operating level?
Yes — I’m speaking from an operating standpoint. Exactly.
All right, so to return to one of those earlier questions about margins in industrial compared with auto, at present globally in auto, they achieve EBIT margins somewhere in the high single digit. As for us at SKF India, the listed entity, how would margins stack up at the EBIT level or the PBT level between auto and industrial?
So once more, we typically don’t put together segmented financial statements at a statutory level for automotive and industrial, correct? As I mentioned, you can refer to this because we performed that analysis for carve-out financial statements, and if you look at financial year 2023 and 2024, the margins were comparable, correct? It was roughly in the 14%–15% range for each of the two.
Alright, only 2 questions left. You mentioned rationalization, and that’s what’s affecting gross margin, while pricing stays the same. Broadly, when you look at it from a pricing standpoint — particularly in the industrial business, from a pricing and margin perspective — how do we typically proceed when we’re deciding the pricing strategy in the market for the industrial piece?
I don’t think I quite understand what you’re asking. Could you say that one more time?
Thinking back to one of the earlier calls, if I recall correctly, we discussed taking a transaction margin approach when operating on traded business, particularly in the industrial piece. So on the pricing side, you mention that pricing has stayed constant over the last one year. I'm just trying to get a handle on how we typically approach our pricing strategy.
Sure. Look, our pricing approach is fairly straightforward, right? When you consider financial year 2022 to 2023 and 2023 to 2024, there was considerable inflation across the global economy—particularly in Europe—which essentially drove us to raise end-user prices substantially in India on the traded products. Now, given that pricing pressure has largely settled, we haven't implemented meaningful price hikes with our customers during this financial year, right? That's the reason you're not seeing much movement in pricing. Regarding the traded products margin, we still apply the transaction net margin method to determine the overall margins for those traded products. As I mentioned, because end-user pricing kept climbing throughout the prior two financial years, we managed to achieve a higher margin on traded products during those two years; and since prices have been more or less steady in the current financial year, we've been able to hold it at mid-single digit, which ideally should have been sustained in the previous two financial years as well.
Looking at it over the long term, and speaking in broad terms for both auto and industrial, with the mix we have between traded and manufactured goods and the margins we've achieved — perhaps not back in 2023, but we've generally posted operating margins in the 15%-16% range — given that mix and who our players are, should we be expecting that sort of margin to hold for us?
To put it another way, when we think about how margins grow, localization is the lens we use, correct? So yes, we do anticipate improvement in our margins, right? Once more, at present, this year's margins will be weaker than they are likely to be, weaker than what you saw across the last two financial years. Over the long term, though, we do expect our margins to get better as we grow in the market and as we keep localizing.
Alright, just one final question. If you consider a few of the competitors, they've made announcements and have even spoken about substantial CapEx in SRB and CRB types of bearings. When you look at SKF, and within the industrial segment, you mentioned 40% localization at the listed entity. So if you examine the portfolio gaps globally compared with what we have in India, and from that angle, look at localization, could you offer some perspective? Which areas are the low-hanging fruits, or how should we think about the localization opportunity for us at the listed entity across the coming three to four years?
I think the money we put in is going to be — well, we've committed that it will mostly land this year, roughly matching what we spent last year. We keep growing wherever capacity is required. Take automotive: we need additional capacity there, and we'll move fairly quickly on investment. In the same way, with industrial, we also need to make the right call on whether the return on invested capital is solid. If capacity exists somewhere else within the bigger SKF entity, we'll look to use it, provided that's what makes the most sense even for the listed entity in India. We're working to optimize the supply chain as far as we can. Where it makes sense, we'll invest. Where it doesn't, we'll keep trading.
However, the parent presentation does mention the Industrial Region grouping, and the India entity falls under that. It references regionalization or localization across India plus Southeast Asia at close to 60%-70%. So with that in mind, do you see any localization opportunities, not only for the India market but also for exports to other regions and other countries in that area?
Yes, definitely. We're still looking into that. I believe more opportunities will come along for those, whether for the local market or for exports. I think the overall statement is that you're right. It says region for region. But also, if you look at the whole statement, it says region for region, but competitive supply chains as well. So we want to make sure we make the best decision and not just invest for the sake of investing in every region.
Appreciate it, and best of luck.
Thanks. We'll move on to the next question, which comes from Ravi Purohit at Securities Investment Management Private Limited. The line is yours — please proceed.
Hi, and thanks for taking my question. I want to focus a bit more on the margin side again. So you're referring to 2023 and 2024, correct? But looking at our operating margins since 2018 — and I don't mean just the past two years, I mean the last seven years — our average operating margins have been roughly 16% to 17%, right? And so far in the current year, we're at about 13% to 14%, right? So that's a material drop, and it doesn't seem like the last two years are unusual, because in those two years margins also sat in the same band we've had since 2018. So sometimes there's a disconnect, whether from an increase in royalty or an increase in the margin the parent retains on its side. If you could clarify, that would help, because the numbers don't match what you're saying about the last two years having unusually higher margins, right? I can go back to 2018, and we've done 16% to 17% margins in each of those years, and then in the last few calls, Mr. Bhatnagar also reiterated that we will focus on these margins and stay in this band, and going forward, as localization improves, our margins can actually go up.
The parent company in SKF on the industrial side earns an EBITDA margin of almost 19%, correct? So there's a disconnect somewhere in that. I believe it would help if you were more transparent and open with shareholders and helped us understand this.
Okay, so to revisit that: nothing has changed, correct, regarding your question about whether SKF India is paying more royalty or any other charges to the group? We have not changed anything. It stays the same, right? Yeah. As I mentioned before, transfer pricing calculations are governed by law, right? It isn't something that SKF India or AB SKF gets to decide regarding how the transaction net margin method would operate between the two companies. And we continue to follow that consistently. I already explained why the overall margins for this financial year came in lower versus the last two financial years. I can go back. I don't have the results for previous financial years prior to financial year 2022, 2023. I can go back and recheck and come back to you on this if I see this anomaly.
Sure, that's really useful, sir. We'd be grateful for that explanation too, since in 2018, 2019, 2021 and 2022 — in each one of those years — operating margins came in at 16%. I believe Mr. Bhatnagar also touched on that point. And sir, one more thing I wanted to raise: you said just now that in India, operating margins for auto and industrial are currently quite close to each other, correct? So we earn, on average, an operating margin of roughly 16%. And you mentioned a moment ago that margins on traded goods sit in the mid-single digit range, right? So would it be fair to conclude that manufactured industrial margins are considerably higher? And if you had to lay out an order — manufactured industrial margin first, then auto margin, then traded margin — is that the right sequence to follow? And would that be a path that we?
That's correct.
Correct. All right. And sir, I believe we've also noted during a few of our calls and AGMs previously that we intend to invest INR 100 crore to INR 150 crore annually over the coming 3 years. Are we still on track for that? And might you split that CapEx between the industrial segment and the auto segment?
Once more, our CapEx spending remains consistent with what we committed to. Even in the present financial year, we've already laid out close to roughly INR 100 crore during this fiscal period. As previously communicated, we expect to stay within the INR 120 crore to INR 130 crore band. Regarding how that CapEx divides between automotive and industrial, I don't right now have figures on hand that would let me share the mix of what we've invested across the industrial and automotive businesses.
All right, one ask from me. Could you possibly provide pro forma figures covering at least 2 or 3 years that split out industrial versus automotive, just so we can see it? The reason is that this is a significant event taking place, and it would help if shareholders had the full picture beforehand. I'm not sure whether a vote will happen on this, and if one does, having some clarity would make it simpler for us to reach an informed decision. We're not asking for audited numbers — just pro forma, some sense of the last 3 years of.
That's already been shared, correct, as part of the carve-out financials we were required to submit to SEBI — the same as what's available on the SEBI website, if I'm not mistaken.
But those figures show zero sales and zero profit across the board, since this entity didn't exist. This 100% subsidiary that we've set up — and if I look at that subsidiary's three-year financials, they won't reflect any revenue, because that subsidiary had no revenue, right?
No, no. Under the requirements of our demerger, we were obligated to provide carve-out financials covering the prior 3 years, correct?
And what about the industrial division?
Was there something we missed, or?
No, not that — the prior three years.
The three prior years — those three prior years were submitted to SEBI. That information is public and posted on the website. You're welcome to go check it.
I've gone over it, sir. Three separate checks. The figures weren't there to find, and what was provided for the three-year period actually pointed to zero revenues, since the.
When it comes to SKF Industrial, you'll want to look at SKF India. Over there, the demerged accounts splitting industrial from automotive are what you'll find.
Have we been giving those out for 3 years?
Correct — that’s accurate.
All right, all right, we’ll look into it. If you can’t locate it, I’ll contact our company secretary and ask for assistance.
Shoot us an email, and we’ll pass along the link to where it can be accessed.
All right. Many thanks, sir. Thank you. I truly appreciate that. Yes.
Thanks. Our following question comes from Bharat Sheth at Quest Investment Advisors. Your line is open.
Hello, sir, and thank you for the chance to ask. It helps to get a clearer picture of this demerger arrangement. So, when we refer to the industrial side and that 40% manufacturing figure, is that 40% at present produced by SKF India itself, or does it also take in our SKF technology sales?
This 40% covers the products that SKF India makes.
All right. So once the demerger is done, in what way would this deal involving SKF India and that SKF industrial unit actually happen?
Could you say that again? I didn't quite follow it.
My apologies for cutting in. Mr. Sheth, we're having trouble hearing you clearly — the audio is muffled. Would you mind switching to your handset?
Yeah. I'm using it now. Is that clear?
Yes. Go ahead.
Right now, it's in production. After the two divisions are separated and a standalone entity exists, will SKF India be selling it to that SKF industrial unit, or will that manufacturing also move over to SKF industrial?
To reiterate, this is still being worked through at the moment, correct? We haven't finalized this yet. After we've completed that finalization internally, we'll certainly be sharing it with all the investors.
Alright. Sir, just a moment, please. I mean, when we discuss regionalization of products, that's a trading business. So how are we positioned — I mean, first, relative to peers, we have substantial domestic manufacturing. And second, as our portfolio comes down, so as to offer a complete solution, sorry, to our industrial unit side?
Could you please clarify what you're asking?
We're trimming the portfolio — I mean, regionalizing it on the industrial side. So what impact is that going to have on our sales?
Like I mentioned, we treat pruning the portfolio as something ongoing, correct? Any place we spot chances, any place we find that, as a business, we're losing money, right? Those products get trimmed on a regular basis. We either change those offerings so they're more competitive, or we build a distinct value proposition with our customers so we can extract greater value from them. If neither of those works, then as part of company strategy, we don't want to remain in a business that's losing money. So we more or less keep cutting some of those accounts along with those products.
Okay. Returning to the solutions side of the business, which we launched roughly a few years ago — so will that business be folded into industrial, or does it also have an auto component? Is there some form of solutions business there as well?
You're talking about the services business, is that right?
That's right. That's right.
Right. So the services business is mostly industrial, and it's going to move over to the industrial business.
One final item, sir: with this regionalization of the portfolio, I mean, regarding the gap in our products, how do we intend to compete against other peers once a product gap exists?
As I mentioned, we're always competing with our peers, correct? And as a company, we'd do whatever we can—whether that's building a strong value proposition for customers or staying cost competitive, right? And if, for some particular reasons or challenges, we can't get past that, and we're unable to compete at the price point the market is asking of us, then we'd prune the portfolio to make sure we cut our losses. We don't run loss-making business.
Alright. Thanks a lot. Wishing you the best, sir.
Thank you. Ladies and gentlemen, so that management can take questions from every participant on this conference, we ask that you keep your questions to one per participant. If you have a follow-up question, please rejoin the queue. The next question comes from the line of Lakshminarayanan with Tunga Investments. Please go ahead.
Hi there, thanks. I’ve got two questions. First, on the industrial business — you mentioned it’s roughly localized, almost 35%–40% localized, just in the last 9 months of maybe the calendar year — could you give me the breakdown of the industrial business: made in SKF India, made in SKF Technologies, and made outside? What’s the split between made in the listed entity, made in India but not in the listed entity, and imported? How does that compare with the previous calendar year or the previous 9 months, whichever you have?
Right now, that information isn't on hand for me. If you email us, we can follow up with you.
Right. And on the second question — as I understand it, there's some sort of arrangement governing how everything has to flow through the listed company, all the transfer margins, with SKF Ahmedabad and SKF imports too, so that every sale of the industrial bearings goes through the listed entity. That's how it's set up at present, if I'm not mistaken.
You've got that right.
Alright. So could this end up being modified, or does it sit in the annual? And if a decision comes that you're in fact setting up another company, would those same kinds of rights apply to the new subsidiary, or would they be different?
That’s going to keep going. Right now, we don’t have any plans to alter it. It’ll stay the way it is.
Understood. Understood. Understood. And the final question is this: among the different facilities you have, which ones sit within the listed entity, and which of those locations will also house the industrial operations? So how do you plan to separate things out once industry is involved? Take Pune, for instance — if industrial and automotive both operate on the same premises, how do you intend to draw the line and make the change? Which plants will face this situation?
This remains under review. As you can imagine, reaching those decisions takes time. So it is still being evaluated. Once we have an answer, we will let you know, right? Hopefully within the next couple of months or so, we will communicate this to you. But it will be handled in a manner that helps both companies succeed and stay sustainable over the long term. So there won't be any bias toward one listed entity over the other.
Thanks, sir. Mr. Narayanan, I'd ask you to get back in the queue for follow-up questions. Kindly keep your questions to one participant. Our next question comes from Priya Ranjan at HDFC AMC. Please go ahead. Since the current participant didn't respond, we'll proceed to the following question, from Mayank Bhandari at Asian Market Securities. Please go ahead.
I appreciate the chance to ask. My question is about margins again—as you've emphasized, there's localization, pricing, portfolio cleanup, and many initiatives that should ideally be pushing margins higher. Yet we've witnessed a very steep decline over the last 2, 3 years. So just to get clarity: have we hit the floor on margin? What's your view?
So, hopefully that’s the case, right? I think you’d keep going, and Ashish should bring this up too. Even in the next quarter, you’ll hopefully see an uptick. As it’s happened, over the last two quarters as well, you’d have seen an uptick itself. So that’s something you’ll keep seeing. We expect it to kind of normalize back to the 14%-15% range. But on the long-term side, 2018, 2019, we said we’ll get back to you. Let us get back to you on that. Versus 2018, 2019, if there’s been a drop and why.
Sir, with the figures you've cited — for instance the 23% growth in the industrial quarter — how would you break that down between volume and value growth?
Mostly volume, correct? We can provide exact figures. So within industrial, nearly 19% came from strong year-over-year volume growth. That's out of the 23%.
Thanks. Our next question comes from Dhanshree Sharma with Anand Rathi. You're up.
Hello there. Is that other one coming through clearly now?
Yes, sir. Go ahead, please.
Yes. Thanks for giving me the chance, sir. So what I'd like to ask is this: what does the traded mix look like at present, and what is it for Q2?
Could you say that again? I wasn’t able to hear you.
How did trade rate mix break down across Q3 and Q2, and what should we expect looking out to the medium term?
Yes. So in Q3, our traded business came in at roughly 39% overall.
Apologies for cutting in — what I was referring to was the trade rate mix.
Right, so that falls under the total picture — traded came in at 39%, that's the figure, if that's the one you're after.
Alright.
Thanks. We'll now take a question from Lakshmi Narayanan, who is calling in from Tunga Investments. Lakshmi, your line is open — go right ahead.
Morning, everyone. Two questions from me. First, back in December you said you'd demerge, and as shareholders we assumed there'd be a separate meeting or call where the rationale would be laid out and we'd get some idea of the value creation roadmap. So on this earnings call — I don't know whether it's the right forum — do you plan to do that, perhaps a couple of months down the line? That's question one, because we're really not clear on how value gets created in the new industrial business. As things stand, it's largely a trading operation. Our thinking is that management has a tremendous opportunity here to bring focus and make sure capital is allocated better, so that's number one. And second, looking at gross profit margin, it came in at about 33% and roughly that level in each of the last two quarters. But it's the lowest I've seen, even going back to FY 2016. The lowest was never this bad. So I'd just like to understand what has changed on the ground for us to report this, particularly when peers are posting pretty decent margins.
I just couldn't get my head around how this transfer pricing situation shifted so abruptly and to such a degree that we ended up reporting numbers that low. Those are my 2 questions. Thanks for having me.
Yes, so regarding your question, we’ll follow up with you. I believe we intend to hold some sort of call where we can discuss the demerger in greater detail. However, the timing isn’t appropriate at this moment. As we mentioned, at present it’s very much at a high level when it comes to the rationale. We’ll share the specifics with you shortly. Yes, so we’ll aim to arrange a separate meeting or a call for this.
Yeah. And particularly when it comes to gross margin overall, I’m not seeing much of a shift, right? We’re still sitting in that 35%-36% range, right? Because I’m not sure how you’re working out the gross margin. If you could send me a specific question about that by email, I can get back to you with an answer.
Thanks. Our next question comes from Senthil Manikandan at iThought PMS, on the line. You're up.
Morning, sir. So Parent has acquired a company in the lubrication sector globally, JSG. If you could just explain how that's going to affect our business over in India, whether directly or indirectly — that's my first question, sir.
All right. So JSG had two functions. First, it distributed a portion of the lubricants that we produce. That’s the first one. Second, they built lubrication solutions — machines designed to lubricate industrial machinery either automatically or by hand. Okay. That’s the business JSG was in. It’s a sizable operation in Australia and Southeast Asia, and to a lesser extent in India. But here’s a chance for us to carry some of those solutions into India as well. We’re still in the early stages. The deal actually closed only in October. At this point, we’re still working out how we’ll structure it and which synergies we can bring into India. Still, opportunities will be there.
I should add one thing here: the lubrication business itself — the lubrication operations we run in India — isn't core to the listed entity and doesn't go through it. So even if an opportunity comes up, under the structure as it stands today, any lubrication business likely wouldn't flow to the listed entity either.
Thanks. Our next question comes from Ravi Purohit at Securities Investment Management Private Limited. Please go ahead.
Yeah. Hi. Thanks again for taking my question. So, setting aside margins and mergers for now, I just wanted to get a handle on a few things on the business side, right? If you could give us some sense of how realizations on general bearings as a product have shifted over the last few years. The context is that in the previous CapEx upcycle, we saw a lot of CapEx being done by thermal power companies and infra companies. And in this current CapEx cycle, you're seeing more and more electronics manufacturing companies, renewable companies who are doing the CapEx, right? Earlier, the CapEx in railways used to be on rakes and conventional bogies. This time around, a lot of all the new bogies or coaches or rakes that are coming in are of different types. They are faster. They look better. They are also far more equipped in terms of braking systems and in terms of other things. So for the same unit of capital stock on the ground, the realizations on bearings, is it a fair assumption that the bearing realizations are far higher this time around compared to what they were in the previous cycles? And going forward, in terms of electronics manufacturing or solar, you have solar tracker, I think.
We’ve also put a great deal of effort into solar trackers. So if you could share a few insights about the kinds of bearings that are entering the market now and what has been learned on that front. And from that, what sort of growth might the sector as a whole see over the next five to seven years?
It's a pretty wide-ranging question, but given that we're over time, I'll do my best to respond quickly. All right. To begin, regarding the current CapEx cycle, we're still observing — contrary to what you suggested — that some of it continues within the metals sector, in steel, aluminum, and so forth. With infrastructure spending and cement — pardon me. As infrastructure growth takes place, we're still seeing a portion of that CapEx cycle there. All right. That being said, you're correct that in certain emerging industries we're achieving better realization and likely gaining additional market share as well. Take railways: they're shifting increasingly toward high-speed trains, and our share is growing there. As for renewables, less on solar, more on wind. Technology shifts are occurring, and we're capturing our fair share in them. In electronics, on a global basis, we hold a fairly robust presence, particularly in China and America. In India, since the industry remains comparatively small at present, we don't have as much. But whenever it emerges, we will see that. And those carry high margins. As you pointed out, they are high-margin products. So yes, I believe what you said is correct. Changes are taking place. Additionally, in automotive, EVs represent something that is emerging, and that too aligns with our strengths.
A few of our products—we hold a very large share of the EV bearings market, with strong realization on every bearing.
Thanks a lot, sir. Ladies and gentlemen, since participants have no more questions, we'll bring the conference to a close now. That wraps up this conference on behalf of SKF India Limited. We appreciate your joining us, and you can disconnect your lines at this point. Thank you. Thank you, management team members.
Thanks.
Much appreciated.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete SKF India Limited transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to SKF India Limited earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.