SKF India Limited (500472) Earnings Call Transcript
November 5, 2026
Earnings Call Speaker Segments
Good day, ladies and gentlemen, and welcome to the Q2 FY '27 Earnings Conference Call for SKF India Limited. <<operator_script>> Kindly be aware that this conference is being recorded. At this point, I turn the conference over to Ms. Cilvina Pereira. Thank you, and the floor is yours, Ms. Cilvina Pereira.
Good morning, everyone, and thanks for being with us today on the SKF India Limited investors call covering Q2 of FY-2026 and '27. Joining us are Mr. Mayan Klane — our Strategy and Business Development Head — Mr. Girish Kumar, and our Company Secretary, Ms. Mauri Kulkarni. Our Managing Director, Mr. Shale Sharma, could not be on the call today because of a personal situation. Today's purpose is to share the Q2 and H1 results, discuss how we performed, and take your questions. Please note that the financial information for the same period a year earlier, as reported in the presentation we shared, was extracted from the financial statements of earth wise combined entities and may involve certain assumptions by management regarding the demerged industrial undertaking. It was prepared following Appendix C of NAS 105, business combinations, drawing on financial information maintained by SKS India Limited. Before handing the call to the management, I want to remind you that certain remarks on this call include forward-looking statements, which carry risks and uncertainties, and actual results could differ materially. Those statements rest on management's beliefs and on assumptions made by management and on information currently available to it.
Listeners are advised against putting any excessive trust in these forward-looking statements or basing any investment choice on them. Today's call exists solely to inform and raise awareness regarding the company's core business fundamentals along with the financial quarter currently being reviewed. At this point, I'll hand things over to Mr. Mayank Holani. Mayank, the floor is yours.
Thanks, Cilvinia, and welcome, everyone, to our Q2 FY '27 investor call. I'm Mayank Holani, Chief Financial Officer at SKF India Limited. Let me begin with the agenda, which you'll find on Slide 3. First we'll go through the key macro indicators, then the executive summary — followed by the quarterly and half yearly results and analysis, a successful story. And last but not least, our new brand launch globally. At the end, we'll take all of your questions. Now let's move ahead with the key macro indicators; please refer to Slide 5. For GDP last quarter, we projected growth of, while CPI keeps up its trend and reaches around 0.9%; next, Slide 6. Use of IoT is expected to carry on the upward trend seen since the last few quarters, while manufacturing PMI jumped to 255.1 in September 26, breaking the downward trend seen over the last 3 months. Automotive production also trended upward during last quarter across all the categories. Unlike the previous quarter — yes, there was a jump in 1 category and a drop in several other product categories. Now we move to Slide 8, the executive summary. You will see we're glad to tell you that we had strong year-on-year revenue growth during the last quarter, while quarter-on-quarter it was marginally positive.
The sales figures shown on the slide exclude other operating income, and these represent product sales numbers. So our sales grew 16% year-on-year, and 2% quarter-on-quarter. EBITDA for the quarter was up 155 basis points year-on-year, but fell 255 basis points compared with last quarter. Profit before tax is 181 basis points higher Y-o-Y, while it declined 22 bps quarter-on-quarter. And here I'm talking about the profit before tax figure excluding exceptional items. Additionally, net working capital stands at 18.8% of sales, 2.9% below the same period last year. I'd also like to note that our networking sector, when compared with March and the prior financial year, has likewise shown meaningful improvement. We now turn to Slide 10, on our sales performance. Here you'll see a bit of the selling sales breakdown of how our sales performed. And you'll notice that for both the quarter and the half year, voting increase is the main driver of our sales growth, with price or mix contributing only marginally. Now we go to Slide 11. Here, you'll see a bit of the mix across the sales of the various components of our business.
During this quarter, our OE business made up 66% of sales, retail aftermarket contributed 19%, exports represented a 10% share, and the SKF Industrial business accounted for roughly 5%. Looking at the H1 mix for the half year, OE was at 63%, aftermarket at 20%, exposed at 9%, and Industrial came in above 7%. That should give you a reasonable picture of the mix and how it compares with prior quarters. Broadly speaking, this puts us in line with the mix from the last financial year as well, apart from the industrial business being added and a slight decline in the aftermarket business. We now move to the next slide, covering profitability. -- until we see a quarter-on-quarter movement of EBITDA and PBT across the last 5 quarters. EBITDA in this quarter is up year-on-year, mainly on the back of contribution from higher volumes, cost leverage, and other income too. Compared with the prior quarter, though, there is a decline, largely because of the elevated cost of goods sold driven by steel price inflation as well as price increases passed to suppliers for their value addition. Profit before tax is similarly affected for the same reason, and we land around a similar range.
Even though COGS came in higher this quarter, EBITDA and PBT for H1 both exceed last year's same period. One more thing I want to point out: there's a timing gap affecting profitability, because the price increase, or the increase from the new additions, has already been passed to our vendors and suppliers. On the customer side, the same increase is still being negotiated and couldn't be wrapped up last quarter, and that's what's driving this impact — we expect it to be corrected in the following quarter. That concludes the financial portion of the presentation, and now I'd like to ask Mr. Girish Kumar to speak about the substantial story we have for you, along with our new brand loans. Over to you, Girish.
Thanks, Mayank. I'm now on Slide #14. During quarter 3, we achieved a number of successes, both customer wins and customer executions. The standout one is really what you've heard me mention regarding the Driveline business win — a major India OEM is bringing in hybrid transmission technology for the first time, and we've been picked as partners to develop the bearings for the transit applications there. What makes this win significant is mainly the new technology we've brought in by way of offering the ceramic very as well as the conductive fresh, which are primarily our electric vehicle offerings. These are some of the high technology, high precision, high-speed bearings, and we're supplying insulation solutions and conductor solutions to the electric motor. The main reason for this key win is our ability to deliver technical solutions from the near shore, partnering with customer development in India. Also, this provides a portfolio expansion into our offering for the new products we've introduced globally and most epically in India as well. And this business sits at the most position where we have about 100% business on the bearing position, and on the new technology solutions, we hold roughly about 50% share.
This really places us right at the front of what we can offer in electric vehicles, and we're genuinely committed to this product. So production for this specific business needs to begin sometime in Q2 2028, and we're eager to grow this business into additional wins as well. Turning now to the brand launch on Slide #16: a few days ago, we formally introduced the new identity and brand throughout the organization, to customers, and to stakeholders. As you can appreciate, for us the brand launch goes well beyond something visual. The brand serves as the face of our company and essentially reveals our personality — a fresh identity and a fresh personality that reflects what we stand for, what we're passionate about, and what our customers can truly expect from us. We're constructing our identity around the contributions we've made to automotive innovation, drawing on over 70 years of our association with Ferrari. All the technologies we incorporate here come primarily from our legacy as well, which is why we essentially maintain our link to our long heritage and the expertise that, for the future, signals our ambition to help shape the future of mobility, co-creating together with our customers.
That captures the core of the brand launch we carried out, along with the new identity—one that feels genuinely futuristic while keeping our values tied to the legacy branded entity we already have. That's all from me. Cilvina, over to you.
Thank you. As we wrap up this presentation, I'd like to ask that we begin the question-and-answer portion now. Moderator, please tell us who is first in line.
<<operator_script>> Our initial question comes from Varun Jain at Dolat Capital. Mr. Jain, your line is now open.
Yeah, so my first question was about margins. Before, we had the sustainable EBITDA margins, but this quarter it dropped to 9.6%. So what happened with the EBITDA margin this quarter? Second, other income was elevated on these 2 are.
Appreciate the questions. I covered this during my presentation as well. What you're seeing is the EBITDA margin being affected by cost inflation, which stems from steel prices along with inflation on value addition — that has been passed to the vendors. So what happens now is some of those took effect in April too, where negotiations were still underway, and the impact landed in the July to September quarter. On the other side, talks or discussions with customers are still going on. Some have actually been concluded, but we haven't yet received the purchase requests for our purchase orders. So we couldn't build them in. Those are expected in the current quarter, the October to December quarter — once those portals, or 9 months, come through, some of them will be from the areas covering the areas part as well — effective from July or, say, possibly an earlier period. So overall it will get covered in the December quarter, and we should see the impact in the next quarter. So primarily, it's a timing gap between quarters when it comes to the cost impact arriving and the pricing part arriving, and income had a couple of one-off items, like there was a ForEx gain plus cap sales, those kinds of items — nothing extraordinary or unusual.
But yeah, compared with last year — if you look at other income, it's been higher over the past couple of quarters, and that's because of the contextual manufacturing with the industrial side, plus rental and that sort of thing are showing up in the.
Yes, sir. Second, sir, B7 is expected to be in place by 1 April 2029. So when will we start to see the BSI-related demand and the new order programs that we can enter, since we have the B7 compliant product, while previously the other supplier did not have it?
Arise, here's what I'd ask you to take into account.
Look, Varun, right now the passenger vehicle market is grappling with the Cafe II norms, and implementation is getting closer, I'd say — so we've got a range of programs underway on low-efficiency, high-performance products, and those are already validated and already being implemented. DS-7 discussions are more relevant and, let's say, sit more at the development stage with commercial vehicle customers. Our offerings on high-efficiency, fuel-efficient products are continuing, and that will accelerate toward business nominations and the like probably at the end of quarter 2 next year, not before then. So clearly, the emphasis is on passenger vehicle with Cafe II. DS7 comes after that, in our view, as we see the market.
Yes, sir. And sir, finally, regarding your CapEx question, we have cited INR 10 — so I believe this falls under the 500 increment mentioned earlier, covering FY '26 through FY '28.
Yes. So Varun, look, as I believe you had on the earlier call, we announced CapEx in our current fiscal of roughly INR 200 crores, correct? As of right now, that still holds. What do you view as per the requirement — are there certain thresholds? Any CapEx, any capacity addition, not CapEx. Anything where capacity addition has a cost above a certain threshold, which is a mix of your turnover, your network, and overlap, those sorts of things for the last 3 years that must be announced and then filed with the stock exchange. So this announcement we made in compliance with that — overall CapEx during the current year is going to be close to INR 200 crores. But yes, now going forward from this quarter — and this is part of that larger INR 500 crore-plus CapEx we had announced. And starting from the September quarter, we will have these channels coming into production and getting commissioned, so which will add to the capacity.
Our next question comes from Krupashankar NJ at Aventis park.
Morning, and thanks for having me. So the first thing I want to ask about is bookings. I'm just trying to get a feel for how it splits between passenger vehicles, 2-wheelers, and CVs within the OEM segment.
Marico, please?
Yeah. You're asking about how revenue splits by group, right? So it's roughly around 45%, 50% — just giving you a ballpark here — 45%, 50% of our revenue comes from two-wheelers, roughly 30% from passenger vehicle, 25 to 30, and then about 15 to 20 from commercial vehicle. These figures do shift quarter-on-quarter, but what I just laid out is basically how the trend has run on average.
Got it, got it. There were a couple of things I picked up on in the results. The first one concerned exports, where growth during the second quarter came in quite strong. Now, on the earlier call, we had discussed that exports aren't really a major focus area for us. I just wanted to get a sense of whether that momentum is going to carry forward, or whether there are any one-offs that 1 needs to factor in.
On the question — and as we've mentioned before, overall exports account for roughly 10%, whether you're looking at the sales mix or the revenue mix, correct, that's how we view it. And that's the range we anticipate it staying in quarter-on-quarter; occasionally there may be one-off transactions, or even if the baseline moves up or down a little, the growth numbers could look concerning. Still, we expect it to stay around that range.
Got it. One last question from me. I saw a note that the contracts on the new branding — just a rebrand changed the brand or royalty fee, which is usually charged to us? Or does it stay the same?
No, that stays the same — that isn't coming. So when the separation of the automotive and industrial businesses took place, this runs from top to bottom across every part. So even the parent company itself has been split as well. And it's going to be listed in Stockholm starting the first of December. So the royalty trademarks, those sorts of things stay the same as a percentage; whatever applies today will remain, in practice.
Our next question comes from Aman at Negen Capital.
Sir, first off, I mean, our new lines are coming up in FY '28. So what's our guidance for traded goods? Can you give some figure there?
So new lines are beginning to arrive from this quarter itself, not in FY '28. So you'll see this 1 line starting in the December quarter itself — right? And then we'll have more coming in the subsequent ones as well. So the 19% is coming in this quarter, it landed in the December quarter. On trade growth, you see it on credit goods, and 1 more is expected to be commissioned in March '27, then followed by the subsequent year and be in the next financial year. As far as traded goods go, the imports are anyway very few here, and the gating inSIndustrials, which has started after this demerger, we expect to, over the next couple of years, bring it down to the minimum level — minimal or mandible level. And that's what — I mean both the sales, both — all right.
Second, sir — what I mean is that our pass-through of costs can occur via — so suppose we take some EBITDA margin, let's say some rough estimates for FY '28.
You're referring to the cost post through forward.
There's cost pass-through occurring with customers across the board. So what I'm asking is, can we get EBITDA margins back to normal levels?
No. So not FY '20 — what we expect is to get back to the guidance we provided earlier, and that should happen within this financial year itself, since talks with customers are still going on. Some, I mean, I don't really want to talk about next quarter specifically on the numbers, but some — you'll see the effect in the following 2 quarters of this current financial year. It's going to happen already, and it won't slip into the next financial year.
Laxmi Narayan from Tonga Investments has the next question.
I've got 2 questions. So the first one is that other expenses have actually gone up. And I think that's attributable to these mergers or the demerger expenses — can you just quantify it? And when do you think this would actually come down? That's my first question. The second question is that we do — you gave a step between different types of industries you serve, I just want to look at it from an application point of view and also from some point of view because there are certain bearings which should be sold as just a part, whereas some of them would be sold as a system, right? Now in our scheme of things, I think we always want to move towards small system-driven and not just part-driven things. On that journey, where are we as a percentage of revenues, or the way in which the management is thinking? If you can just outline which are the segments where we have a core position in terms of differentiated product or a solution we offer, what percentage of revenues it is, and how we intend to scale up? That's the second question. The third question is that you mentioned that you are discussing with your customers in terms of price pass-through, et cetera.
And I think all of this will always play out retrospectively starting in April. Now, from the standpoint of your whole customer base—looking at it through the lens of revenue and the revenue pool—what share of your customers have, and I don't mean a named account, I'm talking about the total attribution of all the revenues you're bringing in, so how much of that has already been agreed to for a price increase beginning in April? And what percentage remains under negotiation? And what percentage falls into the category of something they won't do? I think these are the 3 things I'd like to know.
Let me take the other F first — other expenses. When you look at these other expenses, they aren't fixed. You've got some costs that are fixed, some that vary, and some selling costs that vary, correct? And on demerger-related expenses, as we said earlier on the last call as well, those are done. I mean, there may be a petty expense here and there, but nothing significant as such. Now, in other expenses, a lot of them are variable. Let me name a few: consumption of stores and spares, power and fuel. You're seeing volume growth of roughly 20%, and that immediately goes up — you'd also see royalty and trademarks, a lot of things of that kind. So that gets impacted, and that's where the increase shows up. Because between last quarter and the current quarter, other expenses don't differ much. But yes, versus the previous year, there is some movement. Now on the price increase side — not every customer will be from April. Some prices could start from July, some could start from open. It isn't on a financial year basis.
It varies by customer, of course. And at this point I won’t give a specific figure, since nothing has been finalized yet. We’ll likely address that on the following quarter’s call. That said, discussions are ongoing. You’re correct that in most cases there would be area billings — it could start from July, or it could start from April, depending on the customer. There are even some customers for whom, for the period prior to July — some customers already — we had obtained certain price increases effective June January as well. So this is an ongoing process, and we expect a substantial portion of it to materialize in the December quarter. Gresh, perhaps you can take the second question.
Thanks, Mayank. So essentially there are 2 areas of selection regarding the business lines we pursue. The first is driveline, and the second is wheel lens. So for the 2-wheeler, it's purely driveline, and when it comes to the passenger vehicle and commission vehicles, it's both driveline as well as we and apply. Now, as a strategy, we are going to be only component suppliers. We will not play at the system level at all. So that's the current management thinking on how we go-to-market with our product lines. And right now, there are no, let's say, system-level, subassemblies or subsystems as a product offering that we're giving to any of the market. But what we do is we basically do business for customer outcomes, not just product as a stand-alone performance, but rather what product will create system-level performance outcomes for the customers. So that is the strategy by far that we will pursue in the near future. So by virtue of that, all our revenues are actually coming from the component sales that we actually do to our OE customers. I hope that answers the question.
Yeah, let me go a bit deeper on that. So how do you make sure you're delivering the strongest innovative products and focusing more on outcomes rather than just being product-based — how do you raise yourself up as an innovation partner with some of your OEs? How is that happening? I'd just like to get a handle on it.
Consider an example. Every automaker is motivated by bringing efficient vehicles to market—better fuel efficiency, greater range—and that sort of effort is where the OEMs' competitive edge originates, even as they meet environmental regulations or fuel-efficiency rules. Now, all the engineering, technology development, and manufacturing-process investments we make on the innovation front are aimed at continuously cutting friction down to the absolute minimum achievable within the packaging available for the application. Which means, take vehicle weight as a sub-example: suppose an OEM wants a car 100 kg lighter, and as a matter of budget, the chassis or the transmission rate could drop by roughly 20%, 30%. So that means you really need a product that is compact—meaning very high power delivery packaging with friction reduced equally. And we've basically developed technologies not only on the product side but also in manufacturing precision, to truly deliver those products to customers as they pursue those bigger objectives. So that is, let's say, our go-to-market strategy across the 3 vehicle segments I just mentioned.
One more question, sir. I see there's a path toward ceramic bearings, et cetera, that's taking place. Now, is that too futuristic for India? Or are you also working on something where you can actually offer it to your end clients? And second, on the margin front, I just want to understand what kind of margin you can actually recoup — whether at the gross margin level or the contribution level, whatever it is — how much the increase has been by x percentage. Now, of that, how much can you actually recoup — is it like 70%, 80%, 90%, or even 100%? So I think these are the 2 questions. Ceramic caring on the margin recoup.
I'll take the ceramic bearing question first, and then I'll have Mayank handle the second one. Ceramic bearings are something we already sell in the market. In fact, the customer success we showcased a moment ago involved our first-ever win with this product for the hybrid transmission. Right now it's a niche application, mainly because the failure is more tied to electric current leakage that can shorten transmission life, or in dry systems such as electric vehicles or the hybrid vehicles they run, and the niche nature really stems from the ceramics supply chain. So I think once volumes rise in the market over the next 3 to 4 years, we'll be more competitive than we are today. But OEMs chasing high performance in the premium segment, chiefly Vande, do prefer this for the value this bearing delivers. So that's my, let's say, take on the question you actually asked. Mayank?
Could you say that question about the net margin once more? It wasn't a bit.
Yes, yes. Yes. So Latin, we look at it as gross margin and the EBITDA margin that Sameer — but I think you approach it from a contribution standpoint, since there are other expenses too, some variable and some fixed, correct? So although I don't have access to what the contribution margin is, because there's — that's really how you would do it. From your perspective, I want to understand how much contribution margin you've lost due to all these external events, with prices rising and so on. And how much of that, say, your margin decline has been, let's say, 10 basis points or whatever? And how much do you think you can recoup — claw back through negotiation, whether it will be 80%, 90% of whatever you've lost — or is it that you can actually push it up to almost 100%? Because while there are material costs out there, there are also indirect costs that have actually gone up, which could be maybe gas cost or maybe labor costs or freight costs, et cetera — so I just want to understand your perspective on that.
Okay, so as I said earlier, the first factor was the steel price, and on top of that there's a value-addition piece too, which sits with the suppliers as well. So if you look at our margin now, we largely expect to get the whole thing back — maybe there's a small marginal sliver from this quarter to the next one. But for the most part, we expect recovery in the December quarter.
Our next question comes from Panaromic Capital.
Yes. Sir, a couple of follow-ups to what I asked earlier. First, regarding cost, how much has been recovered? How much of the price has been passed on? And the aftermarket — has that been resolved at this point?
Resolved in what way?
The concern was that pricing had become a problem due to how hyper-competitive other players were behaving. So has that eased?
Look, on the cost side and where the margin sits, I also covered that when the earlier question came up — so we're expecting to get back almost all of it, largely most of it. There might be a slight dip from the current quarter into the next one. But for the most part, we do expect to recover, and talks with customers are happening right now as we speak. Then on the business side, aftermarket, if you look, the gap between last year and this year has kind of leveled off. — in the current quarter as well, you're seeing roughly 7% degrowth. The prior quarter was also around 7% degrowth. And the figures for the current quarter against the last quarter fall in nearly the same band, just under 2% lower than the last quarter. So that volume piece has stabilized. On margin, yes, it's gradually sort of settling, I'd say it isn't moving up. But it is settling. Yet look, VA is a highly dynamic and fragmented market, correct? It isn't — it isn't a handful of customers whose behavior you can dictate, right? There are hundreds of customers in it. So — but by and large, it has now somewhat steadied compared with the major swings you were witnessing until a few quarters ago.
It's somewhat stabilizing now, but yes, there's still work left on that. I wouldn't claim the work is 100% finished and that nothing else needs doing. More steps are required.
Yes, sir. And sir, regarding capital expenditure, from what I saw on the schedule, I believe the majority of your CapEx — actually all of it — is slated to come online in July 2027. So in that case, could you achieve revenue growth of 15%, 18% in FY '28 and 15% in FY '29? Would that be a fair assumption?
It's not as if everything is declining. So what you're seeing in the announcement that came out a day before yesterday: one channel in December '26, 1 channel going live in March '27 for hardware. Then a capacity enhancement on one channel going live in March '27. And then the third new channel arrives from July '27. That's what has been announced. Beyond that, there are additional plans as well, and what we've observed falls within the larger INR 500 crore CapEx. But regarding the volume you'd see, yes, I think a 15% kind of growth, or upward of 15%, would be reasonable to expect in the next quarter, which we should see. But here's what will happen: some of these channels, when we look at it, will also replace trading volume, right. A portion of it will end up replacing trading volumes. Yet when we look at revenue, again, some revenue increase will also come from the price increase which we are getting, right? So in that sense, 15% would be the number, or a little bit upward of 15% is what we should be looking at.
Yes, sir. And just this final one, sir. Regarding the new hybrid mission, just this last one. Sir, about the new hybrid transmission, win. So, sir, in what way does the content per vehicle differ?
Yes. Those ceramic pairings involve high technology and a high-value component inside them. With a conventional bearing, you've got the steel bars, whereas here you've got the ceramic bars. To that extent, there will be a premium in the pricing. So — at this moment, volumes are fairly modest, I'd say. It's only just entering production in India. We really need to see how this progresses beyond that.
Shagun Beriate is on the line with our next question.
Just a quick clarification. I believe last quarter you said the typical range for EBITDA margin is 15%. And I think on this call you mentioned that you'll be getting back to that normal range during this year. So roughly 15% — is that what we should expect you to return to?
So my sense is we're already near 15%, correct? We're sitting at roughly 14.5% — and for sure, you should expect us to get back above 15%, not 15% exactly. It ought to land in, or right? Thanks.
<<operator_script>> Our next question comes from Akash with Sumangal Investments.
My question concerns the service business we previously handled through Astral SKS Limited prior to the demerger — specifically bearing maintenance. Has that business moved over to SKS Industrial, or does it remain within SKF Limited as well? And if it does remain there, how is it progressing? Also, could you share any figures if possible?
No — the service business now sits inside the industrial entity. So the automotive data-services business you're asking about isn't something we handle.
The following question comes from Laxminarayan at Toca Investment.
Sorry, I meant regarding the margins. What I took from your remarks is that you were referring to EBITDA margins, correct — roughly 14.5%. Yet once other income is excluded, the margins come out differently. So how should investors properly view this, and it needs to line up with how you yourselves look at your KPIs, KRAs, or scorecard. Could you shed some light on which margin investors ought to focus on? Is it PBT, or EBITDA, or gross margin — with other income included or left out? Please just walk us through it.
That's a really excellent question. And look, when it comes to gross margin, clearly we ought to view it excluding other income — and this quarter as well, if you look, our gross margin takes a hit of nearly 5%, correct, once you strip out other income and factor in revenue from operations. But from the entity-per-company cost standpoint, other income also matters a lot and shouldn't be disregarded, because what's happening is that a large portion of other income ties to the services or the space, and then to the industrial side, right? So whenever that materializes, one way to think about it is you could assume that as the SKF industry exits, we'd lose net income. But at that point we'd be putting that space or those facilities to use for our own business, and commercially that could prove far more productive, right? So it wouldn't be right to assess it that way, because your capital is there and your assets are already in place. In my view, then, we need to look at it with other income included, and that's exactly how we look at it.
And out of that INR 29 crores, how much is really the rental or usage income we receive, and how much is actually treasury income?
Fabry's contribution to our income isn't particularly large. As you can see, cash on hand at the close of this quarter stands at roughly INR 100 crores, correct? That figure is sizable for a few reasons. First is the . Income from SKF Industrial. Second, we also host quite a few individuals holding global roles, such as those in finance shared services for other nations across the Southeastern region; beyond that, there are some additional resources too, working on global finance roles, and their costs get charged either to the paying company or to the respective countries. . And we -- and under transfer pricing regulations governing cost, these were billed at cost plus markup in line with the transfer pricing guidelines. So those arrangements likewise generate income for the legal entity, correct? So increasingly. As we host more people here in India, the Indian legal entity is also bringing us income. .
Right. Right. Right. So INR 100 crores, or — because, for instance, I mean, you'll notice certain big multinational firms treat those other income items as operating income, and in fact they report rental — I believe Bosch does this, the entrance counts it within operating income. So from a management standpoint, what is it that you focus on, sir, so that we too can.
Right, so that's the situation. Look, when you examine our P&L, you'll see sales — you've got revenue from operations, correct? Then you take revenue from operations, and you're also presented with other operating income, right? So there's a sales line, and then there's other operating income. Other income stands apart, and then other operating income gets counted within revenues from operations as well. So that gives you 2 components, yes. Revenue from operations includes purely the product sales, and other operating income too.
All right, so regarding this INR 29 crores — just following up on that — I'd like some clarification. That INR 29 crores you mentioned, correct? So it involves less from treasury and more from these other operating income items, right, which is included in there.
You see, it's taste income — it's rental income. There are also things like exchange differences, ForEx exchange differences, and it has been as incomes such as asset sales too. So there are multiple items. And in some quarters, it may happen that you have some asset sales — scrap or assets, old FX sales. So those kinds of things come into it as well.
Sachin Maniar from DB Investment Manager has the next question.
Picking up from the earlier questions: could you lay out the related party transaction with Scape Industries in more detail? Beyond the sales, there's an other income ISA agreement, and part of its impact shows up across all the P&L items. If you could highlight that, it would be helpful. Also see which would be tapered off over the next 2 years, I'm supposed
First, there's your product sales and purchase side, correct? The two of us trade with one another. Then there's a second category of products that we manufacture and sell into the industry, and we also purchase from industrial — honestly, I can't walk through each individual item or the whole comment. At a broad level, let me give you a sense of it — they operate out of the SKF India plant, right? So a certain portion of the premises is leased to them. On that debt portion, rental gets charged to them. And then there are certain other common services, right? Certain common solutions — say security, things related to power and all. Those kinds of items are also invoiced to them. So you've got a cost on 1 hand, and then the voice of it gets built to the other entity. So multiple items of this kind form part of it.
All right, so once this tapers off, what would the impact be on margins or any other numbers over the next 2 years after that — how could it affect things when there's .
No, I don’t believe — look, I don’t think it’s — it won’t really hit margin as such, because once this goes off — see this space, suppose you take it, right? So when that space goes off and we replace it with our own channels, that space and those channels would be — I’d say it would be far more productive. As of today, you’re charging rent for that space alone, right? There is none, or less. But then, when you’re doing production on that space and selling that into the market, that is going to deliver much more value. And certain other parts, like, say, the cost — charge-off to them. So the cost you’re incurring for security. It’s on-site power in. Where it is state goes to them because — as per the transfer pricing guidelines, the markup is hardly anything. It’s not a very big number that you’re charging 20% mark, about 15% markup on the cost — so that would be into, I’d say, it will be much more positive. Because we’ll be generating operationally better revenue from.
Right. And finally, sir, regarding a few EV-side business wins, just as was mentioned a moment ago: how would content per vehicle shift on the EV side for you over the next couple of years? New business.
Yes. Clearly, the count of bearing positions will drop slightly relative to what you'd see with an internal combustion engine. What we're observing, though, stems from the demanding performance specs those bearings must meet in EV applications. Ceramic bearings are one instance we've mentioned, and conductors are another — and that is in fact offsetting the lower value content from IC engine bearings. So compared with the other, I'd say we see a slight rise in value per base.
Alright, so that's a slight bump on that. Nothing has come down as far as — no, definitely not.
Nope, there’s no decrease in value — instead, it’ll be a slight increase.
But wouldn't that be traded commentary for the next few years? It was manufactured goods.
It's manufactured. It's manufactured. Those ceramic bearings get made at plants in India. That component I brought up — the ceramic ball — is bought in as a piece of the finished bearing.
Moving on, our next question comes from Kanagawa, who is on the line from Near Investor.
First, regarding the shift toward a specialized high-performing TV platform markitecture that was meant to occur by 2028 — what effect is that having right now on depreciation, on arrest outgrow, or on the margin pressure we're seeing, and so on? And second, on the Haridwar component backward integration — where does that stand currently, and how much is it contributing to our top line or bottom line as of now?
Perhaps, Girish, you could take the first one.
No, I didn’t catch the question. Maybe.
Could you say that question again?
The initial question concerns where we stand on the EV platform architecture and the companies connected to it. We do indeed have the addition of rating by late 2028 — so that's 2 years, 3 years down the line. And also, to mitigate local manufacturing, let's say, or backward integration, adapting in that direction.
I’m not sure I fully understood that, so let me try an actor — or maybe it isn’t coming through clearly. Let me attempt an answer and see whether we can move forward from there. Now, on the EV products: I mean, the E 2-wheelers and passenger vehicles are being manufactured. It’s not that every one of them will begin producing in 2028. So we are in the EV product portfolio business. Some of the high-technology new products we’re introducing — the ceramic bearing connectivities that he mentioned is the one that will enter the mainstream market around 28%, which is what I mentioned. That is the status of the EV business we have. And there are revenue streams coming into the books as we speak in this quarter as well. Now EV bearings growth into driveline as well as in leveling. So all 3 factories are involved. But very specifically, we have called out in the previous calls about hardware anchoring a bit more indie role in the 2-wheeler traction motor bearing per se — but that we wouldn’t monetize backward integration. It is just the capacity expansion and the investment specifically for producing electric vehicle kind of specific bearings there. So that is.
Yes, I believe we can address your question there. Yes. The sole item to note is.
That's really just a continuation of the same topic. On the EV platforms, I have just 1 small question. Are we on schedule, given how competitive the market is? Or have we fallen behind?
Yes, we're on track, and — I had a handful of high-technology products, no real reason to think we're lagging.
Ladies and gentlemen, because of a time constraint, we’re going to treat that as the final question for today. And at this point I’d like to pass things over to Mr. Mayank Holani.
That takes us to the end of today’s call, and it’s really great to see how enthusiastic and involved all of you are. And look, if any of your questions went unanswered or we weren’t able to give you clarity, please feel free to write to our Investor Relations e-mail ID. You can send your queries in, and we’ll be glad to get back to you, and we look forward to speaking with all of you again on next quarter’s call — and thanks once more for all your engagement and for joining this call. Thank you.
Thank you. That brings this conference to a close on behalf of SKF Media Limited. We appreciate your participation, and you can go ahead and disconnect your lines now.
Thanks.
Thanks.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete SKF India Limited transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to SKF India Limited earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.