Home / Transcripts / SKF India Limited (500472) · May 21, 2026

SKF India Limited (500472) Earnings Call Transcript

May 21, 2026

BSE Limited IN Consumer Discretionary Automobile Components earnings 60 min

Earnings Call Speaker Segments

Operator operator
#1

Good day, ladies and gentlemen, and welcome to the SKF India Limited Q4 and FY 2026 earnings conference call. Please be reminded that every participant line will remain in listen-only mode, and once the presentation ends, you'll have a chance to pose questions. If you require help at any point during this call, just signal an operator by pressing star then zero on your touch-tone phone. Kindly be aware that this conference is being recorded. I'll now turn the conference over to Cilvina Pereira. Thank you, and over to you, ma'am.

Cilvina Pereira executive
#2

Good morning, everyone, and thank you for being with us today. Joining us are SKF India's Managing Director, Mr. Shailesh Sharma; our CFO, Mr. Mayank Holani; our Head of Strategy and Business Development, Mr. Prahlada GirishKumar; Ms. Aashi Arora, the former Interim CFO; and our Company Secretary, Ms. Mayuri Kulkarni. Today's call is meant to walk you through our Quarter Four results as well as how we performed across the full financial year. A quick note: the prior-year financial information shown in the presentation we shared was pulled from the consolidated financial statements of the erstwhile combined entity, and it could rest on certain assumptions that management has made regarding the de-merged industrial undertaking. That information was put together following Appendix C of Ind AS 103, which deals with business combinations, drawing on financial information kept by SKF India Limited. Before handing the call to the management, I want to remind you that certain remarks on this call include forward-looking statements, and those carry risk and uncertainty, so actual results could differ materially. Statements of that kind rest on management's beliefs and on assumptions it has made, along with information currently at management's disposal. We caution the audience against placing undue reliance on such forward-looking statements when making any investment decision.

Cilvina Pereira executive
#3

This call today is meant solely to inform and raise awareness regarding the company's core business and the financial quarter we are reviewing. I'll now hand the call over to Mr. Shailesh Sharma. The floor is yours.

Shailesh Sharma executive
#4

Thank you, Sylvie. Good morning, everyone, and welcome to this investor call covering Q4 of financial 2025 to 2026. My name is Shailesh Sharma, and I serve as Managing Director of SKF India Limited. Let me begin with the agenda, which appears on slide number three. I'm sure you have your presentations with you. Please turn to slide number three. First we'll give a quick executive summary, after that we'll discuss macro sector updates, and then quarterly and annual financial highlights. Finally, we'll cover our strategy going forward along with some success stories. At the end, we'll open the floor for your questions. Let's move to the executive summary, which is slide number five. Here, as you can see the results, we're pleased to tell our investors that sales grew positively this quarter, at roughly 3%. As stated in the introductory statement, we'll focus more on the quarter-on-quarter comparison. Here we are comparing Q3 of the financial year with Q4 of this financial year. January to March 2026 is being compared with October to December 2025. As I said, we achieved a sales growth of 3%, with INR 5.6 billion of the sales. Our profit before tax saw a drop of 770 basis points, which is about 9%, owing to some previous quarter performance that included certain one-off gains, which led to higher profitability, including gain on Forex transaction, higher income from fixed deposits, and reversal of some employee cost provisions.

Shailesh Sharma executive
#5

Now turning to net working capital. This quarter it rose roughly 4.6%, driven by one-off items, and we expect that to normalize going forward. Looking at full-year performance, sales growth was a solid 12.8%, taking sales to INR 20.3 billion. Profit before tax, though, fell 694 basis points, and that came from a range of factors — mix, discounts, and the reasons laid out in the introductory statement. Net working capital for the full year improved 3.7% year-on-year. On slide number seven, we cover the key macro indicators. IIP growth has held steady across the last three quarters and came in at 4.1% for Q4 2026. Manufacturing PMI was 53.9 for March 2026. Automotive production trended upward last quarter across passenger vehicles, Commercial Vehicle, and two and three-wheelers. Iron and steel production peaked in Q4 financial 2026, posting 9.7% year-over-year growth. Those are the macro key indicators. I'll ask our CFO, Mr. Mayank Holani, to walk us through the detailed financial performance.

Mayank Holani executive
#6

Good morning, everyone. It's a pleasure to connect with you and discuss our financial results. Moving now to the quarterly performance highlights on slide nine. For this financial year, we recorded our highest quarterly sales of INR 5.55 billion, reflecting a 3% rise quarter on quarter and roughly 14.8% growth year on year, driven mainly by stronger growth in cars, two-wheelers, and powertrains, partially offset by a decline in the distribution business. Regarding the mix, original equipment manufacturers made up around two-third of our sales. That's about 66%, while distribution sales came to about 20%, exports 8%, and the SKF Industrial share was 6%. On growth, you'll notice that both the quarter-on-quarter and annual increases were driven primarily by volume. Moving to slide 10 now. Here we'll discuss profitability for the quarter. Our profitability for the quarter fell to about 9%, mainly affected by one-off factors. These factors should normalize going forward. The decline was mainly because of one-off gains in the previous quarter, that is quarter three of financial year 2026, tied to interest on fixed deposits, Forex gains, and reversals of employee cost provisions. Those were one-off factors. Now, on the year-on-year change in profit before tax.

Mayank Holani executive
#7

A few one-off items were in play, among them demerger-related costs, a mix impact, and the comparability issue that was covered in the opening remarks. Turning to slide 12, let's look at how we did across the full year. Revenue for the financial year increased roughly 12.7%. OE sales were the main driver, posting robust growth of 20%, whereas exports and distribution saw a slight decline. On slide 13, we get to profitability. For the year, profitability fell to roughly 12.3%, and that reflects a combination of factors described earlier. Once more, the same kinds of reasons weighed on full-year profitability as well. Slide 14 deals with cash flow. Cash flow generated during the year came to 4.05 billion INR, a cash conversion ratio of roughly 85%. Certain one-off demerger-related items also had an effect on cash flow for the year, and those should even out going forward as we look ahead to the next financial year. That concludes the financial portion of the presentation, and I would now like to invite Mr. Prahlada GirishKumar to discuss our strategy and success story. Girish, the floor is yours.

Prahlada Girish Kumar executive
#8

Thanks, Mayank. I'd like to turn everyone's attention to slide 16. Our strategic priorities go by the name RACE strategy — it's an acronym covering the entire value chain we're focused on. It begins with products designed to help customers build efficient vehicles — new energy vehicles, plus vehicles now being engineered to meet fresh environmental and emission standards. Then we accelerate growth via commercial excellence. What we're after here is really honing efficiencies in top-line as well as bottom-line performance, and that comes through a range of actions across the whole value chain. It also covers building capability and capacity throughout that chain. Not least, it's about carrying out the strategy with speed, agility, and attentiveness. Taken together, this addresses essentially the entire SKF India automotive business. These four pillars are where various initiatives are being driven that speak directly to the company's financial performance. Next, please look at slide 17. This strategy has to deliver, and the signal is essentially the portfolio of wins we're securing across three verticals: two-wheeler, three-wheeler, passenger vehicles, and commercial vehicle. The nature of the wins in quarter one also mirrors the market's shift toward EVs, along with OEMs returning to the drawing board to redesign their drivetrain subsystems for the new emission norms on the way — chiefly the BS-VII and the CAFE norms as well.

Prahlada Girish Kumar executive
#9

A number of the programs we've secured here are mainly the wins involving electric motors, plus a few of the wheel hub bearings. Mostly, these are the new launches coming up in the 2026 and 2027 financial year. That gives us a fairly robust portfolio within the order book, extending essentially to around 2030. Customer awards too. The change, the emphasis, and the push behind our sustainability effort across operations, the supply chain, and product advocacy as well, is earning acknowledgment throughout our supply base and among customer groups. Of the three, what you're seeing is essentially a clean energy champion designation among TVS Motor's supply chain partners. That's a prestigious honor, and it basically indicates we're the market leaders as TVS sees it, which creates an expectation for us to genuinely deliver more value to TVS in their future development too. In much the same way, our environmental efforts have been acknowledged by Honda Motorcycle. Another prestigious award. The third one is really the business performance recognition from Suzuki Motorcycles. That one acknowledges the top-of-the-line, excellent delivery performance we essentially achieved throughout the year.

Prahlada Girish Kumar executive
#10

Those are the top-level customer acknowledgments we received during quarter one. That brings us to the close of the presentation. At this point I'll pass things over to Cilvina Pereira. The floor is yours, Cilvina.

Cilvina Pereira executive
#11

Thanks. At this point we'll begin the question-and-answer portion. Moderator, please tell us who's first in line.

Operator operator
#12

Thank you. Ladies and gentlemen, we'll start the question-and-answer portion at this point. To pose a question, you can hit star and one on your touchtone phone. Should you want to take yourself out of the queue, just press star and two. We ask that participants speak through their handsets when asking. Ladies and gentlemen, we'll pause briefly while the queue is put together. The first question is from Krupashankar N J at Avendus Spark. Please go ahead.

Krupashankar N J analyst
#13

Good morning, and thanks for having me. I'll start with a question about the books. I just want to get a feel for how the end segments broke down — two-wheelers, passenger vehicles, and CVs — for the quarter and for FY 2026. Could you kindly split out what percentage of exposure we'd have to engine transmission versus wheel end across our whole portfolio?

Prahlada Girish Kumar executive
#14

We don't break out the sub-segments as such, Krupa. Wheel end is the biggest part of our portfolio compared with transmission, when you mean passenger vehicle and commercial vehicle. Transmission sits in second place there.

Krupashankar N J analyst
#15

So you wouldn't be disclosing the tail-end portions from two-wheelers, passenger vehicles, and CVs — the revenue mix coming out of those?

Prahlada Girish Kumar executive
#16

Nope.

Krupashankar N J analyst
#17

Understood. The second question is more about the margin profile. What we've observed, naturally, is a year-over-year deterioration. I just wanted to get a sense of what the one-off cost tied to the demerger would be in the fourth quarter of FY 2026. Regarding margins, what might the sustainable margin expectation be as we move into FY 2027?

Mayank Holani executive
#18

When you look at the fourth quarter of the financial year, demerger-related costs won't be significant. As for the one-off costs I referred to in Q3 — the one-off gains in Q3 — if we take those out, it was more or less at par. Now, on the sustainable margin, we could be looking at a margin in the 11%-12% range in the near future. While obviously, over the long term, the focus would be on improving it further. That's the kind of margin we could be looking at.

Krupashankar N J analyst
#19

Understood, sir. Reviewing what you've shared on FY 2025 performance, the margin profile in that business seemed much stronger, at roughly 20-odd%. I'd just like some clarity on what's behind the 12% guidance you're giving going forward. Is it largely a matter of the traded proportion rising within our overall RM mix? Perhaps you could shed some light on that, sir.

Mayank Holani executive
#20

Could you repeat which percentage figure you gave?

Krupashankar N J analyst
#21

What I was referring to is the EBITDA margins — last year, in FY 2025, they came in at close to roughly 20-odd%.

Mayank Holani executive
#22

EBITDA margin wasn't what I meant. PBT is what I was referring to.

Krupashankar N J analyst
#23

Got it, sir. Where gross margin is concerned, another thing I was considering is that since the automotive business is mostly localized, traded goods purchases were fairly elevated in Q3 and Q4, at roughly 15%-20% of revenues. I just wanted some clarity on what exactly we're buying. Is the bulk of it coming from SKF Industrial, and how much longer do we expect that to last?

Shailesh Sharma executive
#24

All right. In Q4, or even prior to that, this mainly stems from SKF India Industrial Limited. On the automotive side, over 90% of our products are localized. We don't trade, and we don't import many bearings from abroad just to resell them. Automotive is quite localized. Industrial, yes, that's still ongoing, and I'm sure you've seen the industrial results reported separately. Have I answered your question, or is there anything else?

Krupashankar N J analyst
#25

Yes, sir. I just wanted to ask how long this will last. Will it keep going until our new plant in Haridwar and Pune ramp up, or do we expect this to be ongoing on a continuous basis? Some clarity on that.

Shailesh Sharma executive
#26

No. Like I mentioned, for automotive, localization is what we're focused on. It's already above 90%, and that's going to keep going. On the industrial side, if the industrial mix has you a bit puzzled, that won't last. Naturally, over time, it will disappear. Industrial will be its own separate set of things, while automotive will be localized to a high degree.

Krupashankar N J analyst
#27

Okay, so this is my last question, if that's alright. I just wanted to get a feel for the EV side of the business. You did mention some new business wins related to EV motors and bearing sets and that sort of thing, but I was hoping to understand — since we've seen a fair bit of scaling up on EVs over the past 2, 3 years — whether you're seeing the content per vehicle in EVs come out similar to ICE, even though the count of bearings has come down. Looking forward, is there anything you'd want to flag regarding how much EVs contribute to your overall revenue picture, and whether that's margin accretive? Would it be more margin accretive compared with the business you already have?

Shailesh Sharma executive
#28

Right. Naturally, an EV uses fewer bearings than our ICE engine does, and at present our growth is mostly happening on the two-wheeler side.

Operator operator
#29

Apologies for cutting in, sir—truly sorry—but your audio is cutting out on us, sir. We can't pick you up.

Shailesh Sharma executive
#30

I can’t do that. Is that an improvement?

Operator operator
#31

Yeah, that's better now. Thanks, sir. Go ahead.

Shailesh Sharma executive
#32

Right, yes. What I meant is that an electric vehicle contains fewer bearings than our ICE engine does. Currently we're operating in both scenarios, though in two-wheelers—particularly EV—our business share sits at roughly 50%. As you can see, EV adoption hasn't yet reached the speed people expected earlier. To put a specific figure on it, Girish, could you perhaps add those numbers?

Prahlada Girish Kumar executive
#33

Right. Two-wheelers currently sit at roughly 6%, and passenger vehicles are at about 4%. Krupa, to get specific about what you raised, the electric vehicle products are certainly performing far, far better than the ICE vehicles. If you mean any margin erosion stemming from lower volume and similar factors, then certainly more positions are opening up in areas such as, say, the motor bearings, plus the electric insulation high speed bearings, which are several times higher in terms of pricing. That will offset part of the losses we might see on the revenue side there. Beyond that, much of the assortment that we view as high-value bearings would stay shared between ICE and the EV, particularly on the chassis and the axle bearings.

Krupashankar N J analyst
#34

Thanks a lot. I appreciate the answer.

Operator operator
#35

Thanks. The next question is from Mumuksh Mandlesha, who is on the line from Anand Rathi Institutional Equities. Please go ahead.

Mumuksh Mandlesha analyst
#36

Yeah. Thank you, sir, for the chance. Sir, first, regarding the cost side in Q4, how much of an impact on other expenses came from the demerger? Looking ahead, do you expect additional impact from costs related to the demerger, sir?

Shailesh Sharma executive
#37

There isn't a lot of demerger-related cost sitting in Q4, and as we look ahead, we likewise don't expect any demerger-related costs in particular to show up in our P&L.

Mumuksh Mandlesha analyst
#38

Understood, sir. Sir, a lot of raw material prices are rising. I just want to understand how the pass-through is happening in both aftermarket and OEM. What kind of price hikes are being taken, sir?

Shailesh Sharma executive
#39

That's in progress. Beginning with the aftermarket, and per our agreement with the OEM, any rise in steel prices and whatever else occurs, we pass it through. Right now, we've collected from just 2 customers, and similar talks are underway with certain other OEMs.

Mumuksh Mandlesha analyst
#40

Understood. So even aftermarket price increases have begun, sir?

Shailesh Sharma executive
#41

The aftermarket is really a somewhat different kind of game, and we expect that too. I’m not able to disclose the precise details, but yes, it is moving forward. That much I can also tell you.

Mumuksh Mandlesha analyst
#42

Understood, sir. During the transitory period, sir, it’s possible we’ll see somewhat more gross margin pressure because of the lag in pass-through, correct, sir?

Shailesh Sharma executive
#43

Could you repeat that, please?

Mumuksh Mandlesha analyst
#44

Simply because that cost inflation pass-through would take effect with a delay, sir. Over the near term, there may be some pressure on the gross margin side.

Shailesh Sharma executive
#45

Yes, you're right about that.

Mumuksh Mandlesha analyst
#46

Understood, sir. Sir, this year exports and distribution were both lower YOY across the full year. What's the reason those two areas are down, sir?

Shailesh Sharma executive
#47

I’m not certain which figure you’re referring to, but yes—regarding automotive, our aftermarket business has declined somewhat. That’s correct. When we look at volume, we’ve somehow managed to hold it flat. From a net sales standpoint, it’s a bit lower owing to the discounts we gave in order to stay in the market and outcompete rivals. Export is more or less stable. I’m not sure. It’s marginally lower for two reasons. First is India for India. Our priority is first to serve our domestic customers, and there’s enormous demand coming from all of our customers, so capacity remains constrained. For overseas customers, we’re trying to meet that demand from factories near the customer, but it hasn’t dropped off very significantly either.

Mumuksh Mandlesha analyst
#48

Understood.

Shailesh Sharma executive
#49

The car segment is automotive.

Mumuksh Mandlesha analyst
#50

Understood, sir. Sir, regarding fiscal 2027, what level of CapEx should we expect, sir?

Shailesh Sharma executive
#51

Between 2026 and 2028, we're looking at roughly INR 500 crores of investment, spread across those years. In 2026, the figure should come to about INR 200 crores.

Mumuksh Mandlesha analyst
#52

You mean for 2026, correct? Fiscal year 2026?

Shailesh Sharma executive
#53

Yes, from 2026 through 2028.

Mumuksh Mandlesha analyst
#54

It's been 3 years.

Shailesh Sharma executive
#55

3 years, INR 500 crores.

Mumuksh Mandlesha analyst
#56

You're saying, sir, that INR 200 has already been spent in FY 2026?

Shailesh Sharma executive
#57

That money is going to get spent, and a little of it will carry over into the first quarter of 2027.

Mumuksh Mandlesha analyst
#58

Understood.

Shailesh Sharma executive
#59

You could put our fiscal 2026 and 2027 at roughly INR 200 crores.

Mumuksh Mandlesha analyst
#60

Understood, sir. Thanks. I really appreciate the chance.

Shailesh Sharma executive
#61

I appreciate that.

Operator operator
#62

Thanks. Everyone, so management can get to every participant’s questions, please keep your questions to 2 per participant. If you have a follow-up question, please rejoin the queue. Our next question is from Viraj at SiMPL. Please go ahead.

Viraj Kacharia analyst
#63

Alright, I’ve got two or three questions. Sir, I’m just trying to get a bit more detail on the gross margin piece. If you look at it annually, the aftermarket, as you mentioned, hasn’t de-grown. I mean, it hasn’t de-grown meaningfully. If you look at our overall localization, right, we’re already at the 90, 95% plus level, whether it’s aftermarket or the OE piece, right? What explains the gross margin decline, say from 2025 to 2026? It’s fallen from, say, around the 55, 60% levels, and now we’re talking about 46%, so that’s almost a 9 to 10 percentage point drop. Similarly, if I look at other expenses, which is excluding the demerger, we’ve been seeing an increase in other expenses over the last two, three quarters. What are the key elements within other expenses that are driving this increase? That’s one question.

Shailesh Sharma executive
#64

Look, your point about aftermarket sales not having fallen much is correct. As for growth, if you look at it, all of it has come from OEM. Over the full year, if you look, nearly 20% growth is coming from OEM. And on margin, there's a big difference between aftermarket and OEM. Turning to other expenses and how they compare with the prior year, I'd point you to the opening statement Selvi made. The prior year's numbers may not be exactly comparable at all places, because we have split them from the combined entity. That is now expected to stabilize. If you look from last quarter onward, once separation has happened, it will be clearer and more visible. On top of that, you will have stable performance that way.

Viraj Kacharia analyst
#65

Sir, just a quick follow-up on that. If I look at the pre-demerger situation as well, and compare with other players in the space, where in auto, given the high localization and healthy mix of distribution — this sits somewhere between 16%-18% in terms of EBITDA margin, and gross has been upwards of 55%. That is what we were also earning pre-demerger in the Automotive Business. I'm just trying to understand how one should look at the margin structure in our business going forward. What is a sustainable margin one should look at, and what should drive it? Second, can you explain in a little more detail what the arrangement with SKF Industrial is? Which product segments or applications do we buy from them, and what do we sell to them, and similarly, any payouts in terms of royalty or service charges to them.

Mayank Holani executive
#66

Regarding margin, I've already responded—we're nearly at another question we're examining in terms of PBT, and roughly 11%-12% is what we anticipate in the near future. I'll probably ask Shailesh to address the other question.

Shailesh Sharma executive
#67

So what type of product do we actually handle? Broadly speaking, these are two quite distinct businesses. Industrial produces bearings of a bigger size, while Automotive sits a bit toward the smaller end when I refer to the size range. Yes, there is a certain overlap between them, since given the type of assets we hold across both companies, we still do a certain amount of trading with one another — mostly from Industrial to Auto, on account of specific product lines such as medium size DGBB and taper roller bearings. Capacity there is somewhat on the higher side, or I should say that from a demand and capacity standpoint, we run short in Automotive. We lack a bit of capacity, which is why we purchase from Industrial. It isn't tied to a particular application of certain items. It's essentially about what we are able to obtain from there, and where some of our customers are located.

Viraj Kacharia analyst
#68

Are there any additional payments sitting in other expenses — whether amounts we owe SKF Industrial or amounts coming to us from SKF Industrial, such as charges for manufacturing services or anything along those lines?

Shailesh Sharma executive
#69

Yes. At present, that facility is shared, and it is owned by SKF India Limited. As of now, the Industrial assets remain at this facility until Industrial's new plant is ready. Until that point, we are paid rent by Industrial. We also receive certain service charges from Industrial.

Viraj Kacharia analyst
#70

Could you put a number on that on an annual basis?

Shailesh Sharma executive
#71

Not at this moment — we don’t have that precise figure yet. It only began last October, so it’s too soon to say, but that information does exist.

Viraj Kacharia analyst
#72

All right, that's fine. I'll get back in the queue. Thanks.

Operator operator
#73

Thanks. Our next question is from Varun Jain at Dolat Capital. Please go ahead.

Varun Jain analyst
#74

Hello, sir, and good morning. My first question concerns customer concentration. Could you share what share of your sales the top five and top 10 customers account for, and identify who the top one to three customers are?

Shailesh Sharma executive
#75

So, Varun, our five biggest customers usually make up roughly 50%. If you want me to name the top three in the two-wheeler space specifically, Bajaj ranks first for us, then Mahindra comes next — chiefly the passenger vehicle side — and Tata after that, counting both entities together, so commercial vehicle plus passenger vehicle combined.

Varun Jain analyst
#76

The top 10?

Shailesh Sharma executive
#77

The top 10 is going to include the remaining OEMs such as Royal Enfield, Honda, and a few of the Tier one companies too.

Varun Jain analyst
#78

No, sir, what I asked was: what share of your revenue would they make up?

Shailesh Sharma executive
#79

When it comes to the top 10, I'd say it could be near roughly 70%.

Varun Jain analyst
#80

Alright. Sir, my follow-up question concerns the capital expenditure plan you described. That INR 500 crore, when it is fully implemented, what revenue potential does it carry?

Shailesh Sharma executive
#81

All right. Look, we're trying to accomplish two things here. First, we want to cut back on trading from Industrial. A portion of that capacity will move into our own Automotive capacity, and that essentially won't add to revenue, since that revenue already exists today. It's only coming through trading. Second, we're focused on our growth, which is roughly 6%-8%. Girish, do you recall the figure for 2028? What number are we referring to?

Prahlada Girish Kumar executive
#82

I need to verify something. I don't have those checks available right now.

Girish Kumar executive
#83

You could think of it as roughly a 6%-8% CAGR.

Varun Jain analyst
#84

Are you referring to a revenue CAGR of 6% to 8%?

Shailesh Sharma executive
#85

Yes.

Varun Jain analyst
#86

Alright, sir, that’s everything. I’ll rejoin in a moment. Thanks very much. Best wishes to you.

Shailesh Sharma executive
#87

Yeah. Thanks.

Operator operator
#88

Thanks. The next question we have comes from Laxmi Narayan, who is calling in on the line from Tunga Investments. Kindly proceed.

Laxmi Narayan analyst
#89

Yes. I hope you can hear me.

Mayank Holani executive
#90

Correct.

Laxmi Narayan analyst
#91

Yeah, I just have 1 question. From management's perspective, what 2 or 3 strategic priorities are you focused on for the next 1 to 3 years? How would you like to be measured yourselves, or how are you measured when it comes to sales growth or margins, so that we as investors can track the company through that same lens?

Mayank Holani executive
#92

Alright, Girish, perhaps you could walk us through the strategy.

Prahlada Girish Kumar executive
#93

On the strategic priorities side, the main thrust is really to move the portfolio meaningfully toward energy efficiency and emission standards, tailoring value propositions for customers right across the vehicle segments. That one stands as the top priority. Some manufacturing capabilities are going to require investment. The amount of investment you've heard about is also rising, not just for capacity but for upgrading a number of those capabilities too. A substantial portfolio shift is going to take place toward passenger vehicles and commercial vehicles. Proportionally, these 2 segments hold strong growth potential for us, and the premiumization occurring in the market is driving certain product value propositions that sit in the sweet spot for SKF to genuinely perform well in those segments. That's number two. Number three is to amplify value selling. What that means is close partnership with customers. A lot of the OEMs' new launches announced since last year, and into this quarter as well, involve close coordination with customer R&Ds, and we already see major partnerships taking shape there. Those are the 3 priorities we're invested in, and we're building our, let's say, capabilities and capacities both on the supply base and on the manufacturing capabilities.

Prahlada Girish Kumar executive
#94

That's essentially how we see it. As Shailesh mentioned, we think this type of strategy is going to give us an advantage when it comes to the value propositions that will probably provide us with some pricing power. That's the area where we're confident that in the next quarter that follows, once industrialization and the vehicle launches actually take place, we should be able to really see stronger business performance on that front.

Laxmi Narayan analyst
#95

Sir, when it comes to gauging how the company is performing on top-line growth, how do you benchmark against either the industry or your peers or competitors? On margins as well, what sort of thing do you like to measure? Because some companies use operating margins, others use PBT margin, and some of them would say they want to grow X% more than the automotive growth. Some color on that, so that we can also track the company along the same lines.

Prahlada Girish Kumar executive
#96

What I can tell you is that cash obviously matters more to us, so we're driven more by the quality of earnings we generate. The top line certainly isn't the number one priority. Naturally, we do need to win in the space where we think we hold an advantage, and that's exactly what I referred to — the premiumization taking place that sits in the sweet spot for us to perform well. To that end, we'll aim to concentrate there. As you said, the emphasis would be on improving margin.

Laxmi Narayan analyst
#97

You brought up a PBT margin around 12%, if I heard that correctly. Is that something you—which margin band does the company feel most at ease operating in, where you wouldn't drop below X? I'd just like to get clarity on that specific point.

Mayank Holani executive
#98

My apologies.

Laxmi Narayan analyst
#99

PBT, or operating cash, free cash, or gross cash income.

Mayank Holani executive
#100

Could you say that again, please?

Laxmi Narayan analyst
#101

Yeah, I caught that 12% margin figure you brought up at the beginning of the call, and I believe you referenced it again. From a management standpoint, what's the margin band you're calibrating yourselves against? Is that band assessed at the PBT level, or does it sit at the operating margin level? What exactly is the band? Is it something like 9 to 15, or I mean, some sort of spectrum would really help.

Mayank Holani executive
#102

The 11%-12% margin range we provided is essentially an average across the board. Yes, the margin range varies within the different products and market segments. It will differ between distribution, exports and OEM. At the group level and company level, 11%-12% is the overall figure that we would be looking at. Obviously, within the product range, there are multiple factors we have to review that we will already be using, such as the mix of new products and different segments.

Laxmi Narayan analyst
#103

Sir, we can't hear you clearly. Honestly, even with the earlier participant's question, I struggled a bit to catch what was said. Yes, that's a little better, sir. If you could just move nearer to the mic.

Mayank Holani executive
#104

Yeah. So we're looking at roughly 11%-12% for the overall margin, or PBT %. Within that, margins differ by segment. OEMs are going to carry their own margins. Aftermarket carries its own margins. Exports, again, will have a different kind of margin. Taken together, as a bouquet of products and market segments, near term we'd be looking at 11%-12%.

Laxmi Narayan analyst
#105

Understood, sir. For my final question: I've either held or followed the company for roughly the past 10 years. You've consistently made a habit of sharing the industry mix of OEMs broadly when it comes to two-wheelers, passenger cars, and commercial vehicles. At an aggregate level for the full year, could you help me understand the revenue mix across those three segments? This is something you always provide.

Mayank Holani executive
#106

I'm not certain about that. What we can speak to is the retail side and the OEMs. That's what we gave at the start. It comes to roughly 20%, or actually, even leaving out export, distribution accounts for about 28%, with the remainder sitting on the OEM side. What I'm able to share is that two-wheeler, of course, is by far our biggest volume contributor, with passenger vehicle and commercial vehicle behind it.

Laxmi Narayan analyst
#107

You've pointed to the white space where you're strong in B2B2B. As for the other areas, you've simply laid a matrix over various segments and various bearing types. Which areas do you believe you're focusing your effort on in order to win the markets? Where is the white space? Could you elaborate on that?

Prahlada Girish Kumar executive
#108

When we look at where we have open runway, it's the unitized bearings for wheel applications in the SUV segment, and in light commercial vehicles as well — if I had to point to areas where we can perform really strongly, and we are performing strongly there. More specifically, the new-generation transmissions coming in for the CAFE-III norms, with our lineup of low-friction, low-weight offerings — that's a space where we're relaunching ourselves to be a dominant player. Those 2 stand out as meaningful white spaces for us.

Laxmi Narayan analyst
#109

Appreciate it, sir. I’ll follow up with you.

Operator operator
#110

Thanks. Ravi Purohit from Securities Investment Management Private Limited has the next question in the queue. The line is yours.

Ravi Purohit analyst
#111

Hi there, and thanks for taking my question. Sir, broadly speaking, I'd like to mention that, as the earlier participant noted, we have been following our company for over 10 years. The investor communication under Mr. Manish Bhatnagar was extremely transparent and very articulate. We could kind of grasp where our margin structures stand, what the gross margin levers are, and where the new product introductions are. Increasingly, after the demerger, what we're seeing is that investor communication and disclosures have fallen off substantially, and there's absolutely no clarity among investors, both regarding the industrial company and regarding the auto bearings industry. What the normalized margins were before the merger and what they are now — they appear significantly lower than they were pre-merger. Is that because we've begun paying out more royalties to the parent? Is it because of the transfer pricing arrangement between SKF Industrial and SKF India Auto? Over the last six, seven years, if you look, our average EBITDA margins used to be 16% and 17% for the combined entity. Today it seems both entities are much lower than that. Has something changed during the demerger that shareholders should be aware of, but they aren't being made aware of?

Ravi Purohit analyst
#112

I would be very grateful if you could share a few thoughts on this and at least pass this concern along to the SKF parent as well. Previously, a great deal of effort went into holding meetings and so on for the demerger vote. Since that time, communication has fallen off, disclosures have fallen off, and there is absolutely no clarity regarding what the long-term sustainable margins are for SKF. SKF is by far the global leader. Right. In India, from a market valuation standpoint, SKF trades at a 50%-70% discount to its peers. On the margins side, its margins are probably 200 to 400 basis points, or even 500 basis points, below those of the peers. That does not look like the attributes of a market leader. I just wanted to share this feedback. I missed the industrial call, so I could not share it with them. We are already existing shareholders, and we thought we should air our views on this aspect. We would really appreciate it if you could help us understand the numbers, the overall numbers, and the margin structures better. If you could just answer whether there has been a significant increase in royalty pre-merger and post-demerger.

Shailesh Sharma executive
#113

All right. Before Mayank speaks, I want to address the feedback and say thank you for it. If that's how you feel, then it's useful feedback for us. Let me just give you my assurance that we intend to stay as transparent as we were before, and we're firmly committed to that. As a company, SKF has always valued its investors, its customers, its community, and everything else. We have no wish to conceal anything. If that's your impression, then it's feedback, and we'll act on it. If there's specific information you need, and it isn't confidential in nature, we'd be glad to share it, perhaps.

Mayank Holani executive
#114

We hear that feedback, and it's fair. We'll look at how we can sharpen our communication further so that impression disappears—we'll put effort into that. On royalties, nothing has changed regarding any royalty or trademark fees compared with the earlier arrangement. It's the same as it was before the demerger.

Ravi Purohit analyst
#115

Is it reasonable to think — since before the demerger, when we spoke on calls, when those calls took place and the meetings happened ahead of the demerger — that what we were told was the auto business alone generates roughly a 16%-18% EBITDA margin? Actually, a better EBITDA margin than the industrial business, because 95% of it is localized in India. Taking the average across the last five, six years, EBITDA margins were 16%-17%. If industrial accounts for basically 60% of revenue and industrial margins sit significantly below the average, since it is mostly a trading business at present, then logically and mathematically, auto bearings margins ought to be nearer 18%-19% EBITDA, correct? If it is 18, 19% right now, since the demerger we haven't witnessed numbers of that kind. Could you help us out? Could you break it down for us regarding when we will see margins of that kind return? When does the arrangement between us and Industrial shift, whether on transfer pricing or whatever contract manufacturing they do, given that they hold the land where our line sits or is set up?

Shailesh Sharma executive
#116

Actually, it's the reverse. The land belongs to SKF India, and we've rented it out to SKF Industrial. At SKF India Limited — you see, the demerger takes place at the group level, the carve-out, or in India it's a reverse carve-out. Typically, automotive was separated from industrial. At the group level overall, automotive accounts for roughly 30% of total revenue.

Ravi Purohit analyst
#117

Alright.

Shailesh Sharma executive
#118

India's figure is a bit higher — around 34, 35% of revenue. Over there it's a reverse carve-out, with the industrial business having been separated out. What's left is SKF India Limited, which stands as the automotive division.

Mayank Holani executive
#119

So, about that EBITDA margin you brought up — for the last financial year, it came in at roughly 15.3%. That's a bit below where we were the year before, which, as you said, was somewhere around 16% for automotive, but we expect to get back to that level before long.

Shailesh Sharma executive
#120

This is the sort of shift that's taking place, with one-time costs cropping up here and there gradually. You might be noticing it, but we're quite hopeful and we feel confident about the road ahead — perhaps in a couple of quarters we'll steady ourselves and return to normal.

Ravi Purohit analyst
#121

Sir, if I could just carry this point further — if somebody on your team were to actually go through the transcripts of the conference calls held in 2024, and perhaps the early part of 2025 and 2023. Take a look, especially around the time the demerger was announced; if you check the call transcripts from that period and look at the numbers. Analyze the past five years and you'll find 16% was the average across the two businesses combined. Industrial, as it happens, is the lower-margin business, and it accounts for 60% of total revenue. On the automotive side, Mr. Mukund stated on record that we will essentially return to the 16%–19% EBITDA margin range. In earlier calls as well, he noted that Auto is considerably more profitable in India, given that it is fully localized. Just also, on this trade contract manufacturing — in this year's P&L that we've reported for the results, there is a very substantial amount of purchase of traded goods. I'm assuming there must be something the industrial piece is also manufacturing for us, correct?

Shailesh Sharma executive
#122

Yes, absolutely. Industrial, as I mentioned before, is certainly performing well, and owing to a capacity constraint in Automotive following the GST reduction, we're observing substantial expansion across every sector and every segment, while our capacity remains limited — something we're already addressing. As I noted, two additional product lines are being introduced at our Haridwar facility within this year itself. A few other items are also in the works. Because of that, we're somewhat reallocating from Industrial. On EBITDA — look, it's true that in Automotive our products are more localized. If you look, Automotive is a highly price-sensitive market, particularly OEM. In distribution, whether Industrial or Automotive, margins are more or less similar. Yes, perhaps due to import costs, margins may be somewhat affected in industrial, but on the whole, in my view, industrial is a slightly higher-margin business compared with automotive. Globally, if you look at any automotive industry outside India, an 8% operating margin is regarded as a very good margin for automotive, OEMs included. In India, naturally, our aim is always to stay in double-digit territory. There could be some compression given all this transition, and we're confident we'll return there.

Ravi Purohit analyst
#123

Sir, starting next quarter, could we actually have the presentation include a breakdown of costs or margin compression? That would cover one-off or merger-related costs. Even the transfer contract manufacturing cost between SKF Industrial and us. It would help us understand and appreciate our true business margins. If you compare us with peers such as Schaeffler India or Timken India, their margin levels are much, much higher. They are your competitors. Their products are sold at a discount to SKF India's price because SKF India commands a premium. SKF globally also commands a premium over Schaeffler and Timken. Even if that premium is 2% or 3%. The point is, if they are making 20% EBITDA margins, and if we communicated in the past, just a year back, if someone can actually read the con calls and understand, and you see the numbers and see the commentary that was provided to us in the run-up to the merger, it was very clearly communicated that our margins are going to be significantly higher once we localize more. Auto already makes a significantly higher margin. There seems to be a very distinct difference between the communication post the merger and pre the merger.

Ravi Purohit analyst
#124

I want to give you some really honest feedback. Could someone on the team please go through the transcripts, the communications, or the information that shareholders received before the demerger, and compare it with what we're telling them today? Is there a meaningful gap between those two? And if there is, would someone be willing to take the effort and the initiative to close it?

Shailesh Sharma executive
#125

Like I mentioned, we've taken the feedback on board. We'll attempt to provide additional detail, but essentially to expand on the response. To start with, following the post de-merger situation now, if you look at it, we truly lack anyone to benchmark against, since industrial is now purely industrial while automotive is purely automotive. Timken and Schaeffler remain combined in both cases. They cover industrial plus automotive. Previously a solid comparison existed, yet today it no longer does in practice. Even should we wish to make a comparison, there isn't one listed company that is purely bearing and purely for automotive. No such company exists that we could compare with. The same point probably applies on the industrial side as well. I'm just offering you a bit of a heads up so you can reflect on it. This isn't an apple to apple comparison. On localization, as I stated, if Mukund has said it, yes, plenty of investment has been made in even the Ahmedabad factory and even the Pune factory for industrial, but I shouldn't discuss industrial as such, if you must have attended that call. The statement that was made is accurate. We don't wish to go back, and we don't wish to say, "Okay, that wasn't true." Everything we said is true.

Shailesh Sharma executive
#126

It might just be a question of timing. We’re simply in a period of transition right now. All right?

Ravi Purohit analyst
#127

All right, certainly. Thank you very much, sir. It would be great if you could add further details and data points regarding the margin breakdown and the one-off costs tied to the de-merger in the presentations we put together for the quarter research going forward.

Shailesh Sharma executive
#128

All right, thanks, Vishal.

Ravi Purohit analyst
#129

Appreciate it.

Operator operator
#130

Thanks. That wraps up the questions from everyone today. I'll now pass things back to management so they can offer some closing comments. Appreciate it — the floor is yours, team.

Shailesh Sharma executive
#131

All right, thanks so much for that question and for your ongoing confidence in SKF India. The past year has brought both transformation and resilience. Restructuring charges did weigh on our profitability for the time being, yet strong revenue growth, robust demand across automotive, and our strategic emphasis on electric mobility and sustainability leave us confident about what lies ahead. The de-merger is intended to unlock greater value by allowing sharper focus and agility in our business. We stay committed to innovation, operational excellence, and consistent returns for shareholders. Going forward, our priorities are clear margin recovery, sustainable growth, and stronger partnerships with customers and stakeholders. We appreciate your support and look forward to continuing this journey together. Thank you so much.

Operator operator
#132

Thank you very much, sir. Ladies and gentlemen, that brings this conference to a close on behalf of SKF India Limited. We appreciate your participation, and you can go ahead and disconnect your lines now.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete SKF India Limited transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to SKF India Limited earnings transcripts and 132,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.