Home / Transcripts / ClearSign Technologies Corporation (CLIR) · April 9, 2026

ClearSign Technologies Corporation (CLIR) Earnings Call Transcript & Summary

April 9, 2026

NASDAQ US Industrials Machinery earnings 53 min

What were the key takeaways from ClearSign Technologies Corporation's April 9, 2026 earnings call?

ClearSign Technologies Corporation reported significant revenue growth in Q4 2025, with revenues reaching $3.7 million, a substantial increase from $590,000 in Q4 2024. This growth was largely driven by a 26-burner order for a petrochemical plant in Texas. For the full year 2025, revenues were $5.2 million, up 44% from $3.6 million in 2024. However, gross profit margin declined to 27% from 31% due to warranty accruals, and net loss increased by $197,000, primarily due to nonrecurring legal fees. Management did not provide specific forward guidance but emphasized building backlog and expanding market reach.

What topics did ClearSign Technologies Corporation cover?

What were ClearSign Technologies Corporation's April 9, 2026 results?

ClearSign Technologies is demonstrating strong revenue growth and market expansion potential, driven by strategic partnerships and new product configurations. However, the decline in gross profit margin and increased net loss are areas of concern. The company's asset-light model and partnership with Zeeco position it well for future growth, but investors should watch for execution on backlog and the impact of macroeconomic factors on project timelines.

Earnings Call Speaker Segments

Matthew Selinger executive
#1

Good afternoon, and thanks, operator. I'd like to welcome all of you to the ClearSign Technologies Corporation call providing a corporate update for the fourth quarter and the full year 2025. On this conference call, forward-looking statements will be made by the company. If a statement isn't one of historical fact, then it's a forward-looking statement; remarks regarding the company's projections, expectations, plans, beliefs, and prospects fall into this category. Such statements rest on judgments and analysis as of today's call date and face numerous important risks and uncertainties that might cause actual results to differ materially from what those forward-looking statements describe. Among the risks and uncertainties tied to the forward-looking statements on this call are, without limitation, whether sales and field testing of ClearSign products will be completed successfully, whether ClearSign will succeed in growing the market for its products, and the additional risks set out in ClearSign's SEC filings, including those covered in the Risk Factors section of the Form 10-K annual report for the period that ended December 31st, 2025. Unless the law requires otherwise, ClearSign takes on no obligation to update these forward-looking statements so they reflect future events or actual outcomes, and it has no intention of doing so. Joining me today are Jim Deller, who serves as ClearSign's Chief Executive Officer, and Brent Hinds, ClearSign's Chief Financial Officer. With that said, I'll hand things over to Jim Deller. Jim?

Jim Deller executive
#2

Thanks, Matthew. I want to express my appreciation, as I always do, to each of you for being on the call today and for the interest you've shown in ClearSign. Just like on our recent calls, this session will be run in a Q&A format. A number of you have submitted questions in advance, and we'll work those in as we move through today's call. For today's call, Matthew is going to moderate a question and answer portion, and we'll cover the various business units, similar to what we did on prior calls. Many of you probably noticed this already, but a quick reminder that questions can be sent beforehand to our Investor Relations contact, Matthew Selinger, at mselinger@firmirgroup.com. With that, Brent is going to walk through a summary of the company's financials for the fourth quarter and full year 2025. Brent?

Brent Hinds executive
#3

Thanks, Jim, and I appreciate all of you for being with us today. Ahead of getting started, I want to mention that our financial results on Form 10-K were submitted to the SEC last week. Having said that, I'd like to provide a summary of our financial results for 2025. During the fourth quarter of 2025, the company recorded roughly $3.7 million in revenues, versus approximately $590,000 in the same period of 2024. The rise in revenues year over year was mainly the result of our $2.6 million process burner order, which is going to be installed at a petrochemical plant located off the Gulf Coast of Texas. Now, looking at the full year. We recorded roughly $5.2 million in revenues, versus approximately $3.6 million in the same period of 2024. That 44% increase in revenues year over year was mainly the result of our process burner products. It's worth noting that in 2025, we did record revenues from our other offerings, in particular midstream burners, flares, spare parts, and engineering services such as CFD studies. Now I'd like to direct our attention to the full year income statement. Our gross profit at year-end 2025 came in at approximately 27%, which is a decline of approximately four percentage points from 31% versus 2024. The decrease in gross profit year over year was the result of our warranty accrual. Additionally, our net loss at year-end 2025 grew by approximately $197,000 versus the same period of 2024. That increase year over year was mainly the result of non-recurring legal fees of approximately $746,000 in 2025; now I'd like to move the focus to cash. Our net cash used in operations for the full year 2025 came to approximately $4.7 million, versus approximately $4.4 million in the same period of 2024. That change year over year was mainly the result of our change in net loss that was discussed earlier. As of December 31st, 2025, we held approximately $9.2 million in cash and cash equivalents, with approximately 5.3 million shares of common stock outstanding. We believe our overall working capital puts us in a position to keep executing on our long-term growth plan to scale our revenue and profits past our breakeven goal as we keep building a technology company known for its innovative solutions. With that, I'd like to hand the call over to Matthew Selinger.

Matthew Selinger executive
#4

Thanks, Brent. Jim, I appreciate you being here with me today. Jim, recently there's been a great deal of fresh attention directed at the company, and I notice a few unfamiliar participants on today's call. Could we pause briefly to provide a big-picture summary of ClearSign's business, and after that perhaps transition into the way we operate? Jim, in the simplest terms, what is it that ClearSign does?

Jim Deller executive
#5

Alright, yes. Our business is industrial technology, and what we build is a burner for industrial use that produces low emissions. These parts regulate the flames at businesses such as chemical plants and oil refiners, plus boilers and midstream gas heaters. The flames involved are quite large industrially. What drives this sector is the requirement to comply with the newest emissions rules, and in particular to deliver ultra-low NOx emissions. Controlling the chemistry inside a flame lets us achieve that. We accomplish it by managing how the flame is structured. The Clean Air Act is what drives NOx emissions. Regulation imposes them. Our customers are obligated to hit those levels. What gives us an edge in the marketplace is letting them achieve this far more cost-effectively than the technology that already exists. Regarding the levels involved, the competing emissions-reduction technology goes by the name SCR, or Selective Catalytic Reduction. Essentially, it's a chemical plant bolted on the back end that must be integrated into a heater so emissions are stripped from the flames before those gases exit the stack. Using ClearSign technology, we simply avoid generating those emissions at all. For some perspective, with one of the orders we currently hold, we had been in discussions with that customer before getting the order, and their projected expense for taking the alternative SCR route came to roughly a $50 million project just to convert a single one of their heaters. Our projection for the ClearSign approach, their overall cost, burners included, falls somewhere around $7-$10 million. On this single project alone, we believe we're saving that client roughly $40 million. Choosing this new ClearSign technology and avoiding emissions at the source delivers a very obvious cost benefit for our customers.

Matthew Selinger executive
#6

Okay. You've covered our operations, what's moving the market, and the technology competition picture to some degree. Jim, perhaps you could go deeper on the market itself — the opportunity it presents. Could you put some numbers behind the size of the market we can address?

Jim Deller executive
#7

All right. The largest portion of our market sits in oil refining. We're also aiming to grow into petrochemicals, though let me try to frame the fairly practical opportunity size for ClearSign. The rules driving demand for what we offer are the most recent and most stringent ones. For us, there's a bit of that in Europe, but mainly for this purpose we focus on Texas and California, and our estimate is roughly 28,000 burners are installed at refineries across California and Texas. During a week-long technology feasibility study with ExxonMobil back in 2019, and through the discussions we had in that effort, ExxonMobil shared their view that around 15% of their burners were solid candidates for ClearSign technology. Applying that 15% benchmark to the 28,000 burners installed in California and Texas, we get roughly 4,200 burners now in place at refineries there that are strong candidates to be retrofitted with ClearSign technology so they meet current emissions rules. On timing, expect that to play out across roughly 10 years, as we work to frame or bracket the market. Another key data point: the typical burner price runs around $100,000, with bigger ones costing more and smaller ones costing less. For this calculation, we assume a ClearSign burner sells for roughly $100,000 each. That gives you a figure for refining. As for petrochemicals, our assessment is that it's roughly the same size as refining. When we consider overall ClearSign product sales, we also have other offerings. I'd anticipate our flare and thermal oxidizer products together accounting for about 20% of our business, while our midstream and boiler products represent another 20%. Refining and petrochemical would be about 60% of the total.

Matthew Selinger executive
#8

All right, that sounds good. Once more, when you mention that burner — a standard burner typically runs about $100,000, since we've pointed to that figure as what Brent mentioned regarding that order of 26 burners. We'll get into some orders afterward that should assist investors in roughly gauging what an entire order size might come to, if you take that dollar figure and apply it to a single burner within one of our orders.

Jim Deller executive
#9

Right. That works well as a reference point. One more thing worth keeping in mind when you evaluate this business is how we describe our corporate setup and our operating approach. Ours is an asset-light model. To reach the break-even point, we require roughly $16 million annually in run rate, which equals 160 process burners each year. That figure isn't especially large. Given how big the market is, if you run the numbers, there's ample room for ClearSign to build a highly profitable enterprise.

Matthew Selinger executive
#10

Excellent. Jim, something you brought up a moment ago works nicely as a bridge into what I want to ask next. Asset-light came up in your remarks. You also noted, quite rightly, that we operate as an industrial technology company, and that this asset-light model lets us secure those margins in the roughly 30% ballpark that Brent referenced. In what way does ClearSign accomplish this? What does our structure look like, and what is our approach to the market?

Jim Deller executive
#11

Sure. Our technology and IP are one of a kind, and beyond that, our computer modeling gives us capabilities nobody else has. From the time I came on board at this company in 2019, we laid out a plan to make the most of that IP, yet direct our sales toward this highly industrial marketplace filled with long-standing customers, the refining businesses among them. Full-scale burner demonstrations are mandatory for those customers; they also insist that the equipment come out of a shop holding their accreditation, backed by an extremely advanced quality control setup; building an asset of that sort demands substantial capital. Instead of taking that route, we began capitalizing on our IP by operating through collaborative partnerships alongside other firms that already possess such infrastructure, and this industry contains some truly enormous players. Late in 2019, we entered a collaborative partnership with Zeeco, one of those truly enormous majors. Zeeco is a multi-billion dollar company — that's billion with a B — and Tulsa is where they're headquartered. Their location sits roughly 15 minutes down the road from where our office is; the biggest burner test facility and manufacturing plant around is theirs, right here. These days we're able to showcase our products inside the Zeeco test facility. Zeeco handles the building of our process burners, which means our customers reap the benefits of their manufacturing approval plus their quality control systems. Essentially, we're able to hand over our IP while bringing it to market carrying Zeeco's credentials. On Zeeco's side, this collaborative arrangement lets them go after market segments that lie past what their own technology can do; for the two of us, it's genuinely a win-win relationship.

Matthew Selinger executive
#12

All right, that sounds good. So now let's move on to the fourth quarter and the close of the year. The business finished the year strongly, posting all-time highs for both quarterly and yearly revenue. Brent already touched on this, but what exactly drove those results?

Jim Deller executive
#13

Actually, I'll hand things over to Brent instead. He's got the specifics on the financials and can address that in greater detail.

Brent Hinds executive
#14

Thanks, Jim, and thank you, Matt. So yes, most of what we brought in during Q4 came from that order of 26 burners we sent to the petrochemical company located along the Texas Gulf Coast. I believe it's worth pointing out that this wasn't the only thing behind those Q4 revenues. We also booked revenue tied to orders for spare parts as well as engineering services. One of those engineering services in particular was pretty exciting — a customer witness test, in which a subject matter expert from a petrochemical company came in, had a chance to inspect our burner, and ran it through the test facility. I compare it to bringing in a test driver so they can take the race car out on a racetrack and have some fun with it.

Matthew Selinger executive
#15

That went well?

Brent Hinds executive
#16

Yes, it went well.

Matthew Selinger executive
#17

That's good news. It's nice to hear that. That order for 26 burners was finished and shipped, and we've recorded the revenue from it. Is that correct, Jim?

Jim Deller executive
#18

You're right about that. What we needed was for those burners to be finished, boxed up, and set to be picked up before the year was over, and Zeeco truly delivered on that for us. They put in very long hours, yet prior to the team heading off for the holidays, we and Zeeco together had it finished. Yes, our recognition on that was accurate.

Matthew Selinger executive
#19

When will this project start up in the field?

Jim Deller executive
#20

Right now those burners are sitting at the customer's location, and installation is set to take place shortly after the midpoint of this year. As things stand, the expectation is that startup will happen in October.

Matthew Selinger executive
#21

All right, let me put this question to you. In your view, will this increase or aid the exposure we have and the deals we might have coming down the line?

Jim Deller executive
#22

We think this is going to matter a great deal for us. A lot of factors play into that. Obviously, this is an extremely prominent customer. They're located right in the middle of our largest market, along the Texas Gulf Coast. The burners represent an early iteration of our Gen 2 technology, and that burner is a strong one for us. Calco handled the project, and as far as I know, they're the top engineering and heater revamp firm in the United States. Many people are paying attention to these burners, and I think that's true across the board. We need to be extremely cautious whenever we publicly discuss client names or project specifics. Throughout the industry, at every conference and through personal connections, this project has become quite widely known. People are familiar with the burners. A great many individuals are following this project and discussing it. Even firms such as Calco have served as an excellent reference for us, since they went through this project and witnessed the burner development, and watched them run in the Zeeco test burners. They've already played a significant role in speaking with other customers about ClearSign burners and what it was like to work alongside us.

Matthew Selinger executive
#23

Right. As we brought up during the last call, the name Birwelco came up. If you visit their site, they show the logos belonging to the companies they serve, and honestly it reads like a roster of super majors plus the big petrochemical players, and that's all visible right there on their website.

Jim Deller executive
#24

Yeah. In fact, they belong to a quite sizable organization in their own right. And yes, as a client, they have been excellent for us.

Matthew Selinger executive
#25

Okay. Now onto the additional process burner orders we made public. We shared news of an order for 32 burners from a large refiner, plus one for 36 burners from a different major player — one we'd describe as a well-known name. As for that second one, the 36 burner order headed to the Gulf Coast, what's the status on it?

Jim Deller executive
#26

All right. Each of those orders gets delivered in stages, and that's a pretty typical arrangement. Engineering plus the computational modeling, or simulation, of how the burners perform inside the customer's heater makes up the initial stage, and that portion has proceeded remarkably smoothly. The client has received the results, so right now we're in talks about advancing to the testing stage for that project. Another notable element is that the installation was divided into two stages, and as a matter of fact, the initial half got moved up, allowing us to provide the burners for its first two sections. This heater is a big one with four sections; we're supplying burners for the first two sections, and those will be up and running before long. Our expectation is that we'll finish the remaining two sections, though the first manufacturing stage was in fact accelerated, and that's quite favorable news on our end.

Matthew Selinger executive
#27

You mentioned before that there are factors pushing adoption of our tech and our offerings, and you said NOx emissions are a big one; with this project, though, it's different factors at play. Is that right?

Jim Deller executive
#28

Yes, that's right. We brought up the CFD and the computational modeling. That's exactly where this becomes extremely useful. For our client, a major piece of the economic motivation for taking on this project isn't just staying in compliance with NOx emissions — in this instance, it's also about enhancing the heater's performance and operation. Something else our technology allows us to do is exercise excellent control over the flame's shape and structure, and influence the pattern, or the manner, in which heat gets transferred to the heating surfaces within the heater; we're able to spread the heat uniformly and essentially cut down on the hotspots that will appear if that isn't done properly. For the client, what that translates to is a reduction in maintenance needs, and we can lower how often they must replace damaged tubes — or stop that from happening at all. It boosts what's known as the heater's uptime, which basically means greater productivity for them along with lower maintenance expenses. We're able to provide the client with a very tangible return on investment. Rather than — or in addition to — emissions-based projects, here we're handing them a far more cost-effective means of resolving an issue. With projects of this kind, we can genuinely deliver a return on their investment by helping them earn more money.

Matthew Selinger executive
#29

Okay. We're actually making the heater run better and more efficiently.

Jim Deller executive
#30

That's correct. Yes.

Matthew Selinger executive
#31

Then there's the second aspect of this project that you and I talked about not long ago, which I'd describe as the way this order has been designed or engineered. You mentioned that this represents, in a sense, a fresh iteration or use of our burners. Could you share a bit more detail on that?

Jim Deller executive
#32

Right, that tracks. Going back to the earlier discussion about the business and the sector overall, plus that ExxonMobil evaluation that 50% of burners would be a solid fit for ClearSign — that figure rested on the burner models we offered back then, and those were round, vertically fired units, the shape you see most often. Heaters come in various kinds, shapes, and layouts. With this Gulf Coast installation specifically, the burners sit mounted horizontally on opposing walls, firing inward from either end of a square box. You'll find quite a few offshore heaters built this way. Securing this reference and proving the burners work well in that setup gives us a strong benchmark and unlocks this additional heater category for ClearSign, widening our addressable market. And it isn't only a demonstration of our ability to manage flame geometry and improve heater operation — it also earns us a reference and stretches our offering into the horizontally fired arrangement.

Matthew Selinger executive
#33

Great. Demonstrating a larger applicability and expanding our addressable market.

Jim Deller executive
#34

Yes.

Matthew Selinger executive
#35

Excellent. Let's turn to the 32 burner order, and how is this order progressing?

Jim Deller executive
#36

In a lot of respects, this order closely mirrors the first one; the CFD and the engineering order came to us at the outset. That's worked out really well. Just like order number one, this project was divided into 2 portions as well, with the initial portion being sped up. As a matter of fact, we should be entering the testing stage before long; in truth, we just got an order for a bit of engineering to back that test. Following that, anticipate stepping in and being in a position to build the product for that initial heater sooner than what we had initially expected. That's welcome news.

Matthew Selinger executive
#37

That's good to hear. Given that we're discussing that earlier order, the subject is designs or applications. Would you say this is a typical application or setup?

Jim Deller executive
#38

It's amazing how similar these projects are. It's a different configuration.

Matthew Selinger executive
#39

Okay.

Jim Deller executive
#40

This one is what we call a flat burner. The standard burners happen to be round — actually, the horizontally fired units we were just discussing are round too. A long, thin flame comes out of this burner, which is built to fire up against the wall on the inside of the heater. Once more on the heater specifics: it contains either brick or a wall made of high temperature concrete. The wall gets heated by the burner, and from that wall the heat radiates onto the process tubes. The particularly noteworthy thing here is that a great many heaters and refineries share this configuration, which makes this burner highly relevant. Something especially interesting is that, as we look ahead toward our product development pipeline, our aim is to enter the petrochemical business, and more specifically the heaters used in ethylene manufacturing. In ethylene furnaces, having a flat burner that fires up against the wall in this configuration is an extremely common format. That industry on its own is roughly the same size as the whole refining industry, and if we can break into that production, these burners — as we develop them for this refining process heater — represent a solid step in that direction. It demonstrates our ability to make a burner of this shape. Getting into the ethylene furnaces still requires more work, but I think it will deliver a highly valuable step forward as we move into and grow within that ethylene market, so that's very exciting for us.

Matthew Selinger executive
#41

Right. These aren't just big deals for our company — every single one involves a distinct setup, and together they'll serve as excellent proof points while widening the market we can address.

Jim Deller executive
#42

That is correct. On a broader note, when examining these items, what I believe is being demonstrated is that, thanks to our highly advanced CFD skills and the extremely flexible burner design we created under the government SBIR program, we can modify our existing burner to serve the unique requirements of customers across these various heater uses where competing burners have failed. It genuinely serves as a platform and a showcase for what ClearSign is capable of. The large number of engineers we have managed to bring on board and employ, the advanced CFD technology we put to work, the expertise held within the organization, along with the IP we possess and what we built through the major SBIR initiative we recently wrapped up, I believe demonstrates those abilities at a broad level in terms of how we can tailor this technology and easily take it, place it into these varied setups, and prove the success we have managed to prove.

Matthew Selinger executive
#43

All right. So apart from those 2 projects already in place, how does the pipeline shape up? We talked about something on the previous call—a sizable refiner that was looking to obtain pricing for roughly 10 heaters. Have any of those inquiries come your way yet?

Jim Deller executive
#44

Yes, let's rewind for a moment if we could. Back in February of this year, we held an update call, and the primary driver behind that was noticing a change in the kinds of quote requests coming our way. Essentially, we began receiving substantial interest from super major, household-name companies and major refineries. Two of those have now converted into the orders we just mentioned, but there was considerable additional interest from these large customers we'd been chasing without much luck, since our technology simply wasn't widely recognized or trusted in the industry. Recognizing that notable shift in market dynamics was highly pertinent, which is what prompted the February update call. During that call, one example we brought up involved the heater engineering firm Birwelco, a major refinery, and a key decision maker and subject matter expert there, who spoke with his close contact at Birwelco to obtain references regarding their experience on the 26 burner project, and then asked Birwelco to send 10 projects from their pipeline over to ClearSign for future input. As of today, we've gotten four of those inquiries and have been able to put together proposals for them to set expectations. Projects like these typically get scheduled across an extended timeframe; they're timed around refinery turnarounds and project planning. There's a great deal of work involved; not all of it will arrive within the next 12 months. Certain ones are planned for years out and will keep being that way. When it comes to growing our proposal backlog, this matters a great deal to us. Yes, so far we've quoted four of these. We anticipate additional ones.

Matthew Selinger executive
#45

Thanks; on that point, you're correct that we meant the call back in February. We discussed a sort of market pattern that's emerging, correct? Bigger clients, bigger plants, bigger heaters, so what we're observing is sort of bigger orders, and we're quoting bigger orders.

Jim Deller executive
#46

Yes.

Matthew Selinger executive
#47

From that, could you talk about the total process burner pipeline in general?

Jim Deller executive
#48

Absolutely, I’m able to do that. To share a few figures, the four heaters at that single refinery come to roughly 73 burners altogether. My understanding is that’s the combined count for those four. During the previous call, we provided a broad figure. The overall backlog stood at approximately 200. That figure reflected what we were aware of regarding the 10 heaters from the one, since inquiries have kept coming our way. We’ve brought in additional ones. As of right now, I think that adds up to about 225. Those too come from major refiners that are household names and widely recognized.

Matthew Selinger executive
#49

Also, I mean, during the previous call we discussed this, but what kinds of marketing efforts are sort of lined up ahead of us? We brought up a demo that's scheduled for later this month.

Jim Deller executive
#50

Right. I mean, clearly we're giving LinkedIn a push along with our advertising efforts. The major thing happening at the moment is a new burner technology that we created with support from the DOE SBIR grant. That work wrapped up in the prior year. During the final stage of that effort, we're in fact putting it out there and showing it to the industry in a few weeks, on April 23rd; a demonstration is scheduled at the Zeeco test facility. Decision makers plus subject matter experts from big refineries and engineering firms are traveling here for it.

Matthew Selinger executive
#51

What's the comparison here? I realize we've held similar demonstrations before, but could you perhaps just offer a comparison of how this one might stack up? I understand it hasn't taken place yet, but so far, how does it appear relative to the earlier demonstrations we've held?

Jim Deller executive
#52

Yes, we’re able to do that, since we clearly monitor the replies to the invitations and who is attending. It works a lot like what we see in the market and with proposals. At the earlier demo, as I recall, attendance was roughly 16 to 18 individuals; at this point we have slightly more than 30 people, and that figure keeps rising, coming to this demonstration. What matters especially is who makes up that 32; we have important decision makers, subject matter experts from the leading refineries and leading engineering firms, among them customers we are bidding to and have on these prospective pipelines coming in to observe how it burns. These individuals are setting aside time from their schedules, flying to Tulsa to spend the day with us; for us, this is a very encouraging development.

Matthew Selinger executive
#53

Yes, I believe it's going to be an excellent occasion. All right, then let's move on to the M series, our product centered on midstream. Jim, similar to what you did regarding the process burner, could you please walk us through the midstream use case, and perhaps how it contrasts with the process burners?

Jim Deller executive
#54

Right. Let's begin with the industry itself — the refining branch of the family takes crude oil and turns it into a finished product. As for midstream, we're shifting upstream here. Midstream is essentially transportation, and since so much of this concerns gas, it also involves purifying and cleaning that gas. When gas emerges from the ground, it contains elements you wouldn't want to burn. So it gets cleaned, and after that it's moved along to become the gas you'll notice coming out in your homes, plus the downstream side. For heaters and burners, the equipment tends to be far simpler than what you'd find in refinery heaters. It's far more standardized as well. What that means is our burner products can be designed, but after that design stage, they aren't customized for each individual job. The fuel is almost always natural gas, unlike refineries, where you're dealing with an entire mix of blends. Because of all this, the business can run on a much shorter cycle. Burners usually get manufactured according to prints that already exist; once products are developed, engineering and project management resources are consumed very minimally. Even though it rests on the same technology and know-how regarding the product line itself and the way we think about how it actually works, it functions quite differently from the process burner; orders or revenue can come in far faster. We don't always have detailed visibility into the pipeline, since our clients are manufacturers of heaters. After they receive pricing for our burners, they'll rely on that pricing again and again. Any time they have an application for that burner, they don't return to us for specifics. I'm certain there are plenty of quotes out there featuring our equipment that we aren't even aware of.

Matthew Selinger executive
#55

Pipeline came up, yes. I realize we keep bringing up that prior call, but as I recall, during that prior call we did bring up our proposal pipeline.

Jim Deller executive
#56

Yeah.

Matthew Selinger executive
#57

Which sits about.

Jim Deller executive
#58

It was up 50 at that time, I believe.

Matthew Selinger executive
#59

50?

Jim Deller executive
#60

Yep.

Matthew Selinger executive
#61

Yep.

Jim Deller executive
#62

They keep rolling in. As I mentioned, that's only the ones we're aware of. There are certainly additional ones out there that, as of right now, we haven't even learned about. And speaking of that, we've got those 2 burners. There's an M1 burner that's now been operating for many months. That one was our initial burner. It's the ultra-low NOx burner; that model operated at roughly 2 PPM, going well beyond any specs these burners call for; we've also come up with a cheaper option, which we refer to as the M25, a burner with lower specs, yet suited to a far wider range of uses. We're seeing a great deal of interest in deploying this burner. The first one of those went into service 2 weeks ago, satisfied every requirement, and that burner is now up and running. It was a really satisfying step for us to finally have one of those burners operating, and at another DEVCO heater down in Texas, no less.

Matthew Selinger executive
#63

All right, so that's happening via DEVCO. We discussed this kind of dynamic — the way we market to third-party manufacturers, outfits such as DEVCO. Has anything new come up regarding those third-party manufacturers?

Jim Deller executive
#64

Right. Especially with DEVCO and keeping up with the news — we’ve brought up that Zeeco is our partner. Zeeco is a multi-billion-dollar company. Zeeco has in fact acquired DEVCO, which is now part of Zeeco. Their location is now quite near our office. Well, what happened first was that I contacted Zeeco around the same time Zeeco was contacting us, just to verify that ClearSign burners would remain within the Zeeco business. Both sides were after the same thing there, so that’s very encouraging. From what I understand, Zeeco has clearly taken over that business and intends to expand it. Their resources are far greater than the old DE had. I think that’s actually quite positive. We might be seeing considerably more Devco work going forward.

Matthew Selinger executive
#65

Alright, it's been quite a lively session. Refining and midstream are both behind us now. Let's move nearer to the production well and discuss a different product line: flares. This is one where we've witnessed a powerful comeback, along with growth in order volumes and in the dollar value of those orders. Jim, as you did for the other 2 product lines, might you provide a quick overview of what our flare products are?

Jim Deller executive
#66

Sure. For most folks, what comes to mind is flames. You picture an oil refinery, and you notice big blazes atop extremely tall poles, piping, or structures rising into the sky. Flares come in quite a few varieties. The ones we make are considerably smaller. Usually they measure 30 to 50 feet in height, and they sit within a pole or vessel of that scale. The flame is enclosed. That design choice exists because, as with our other offerings, we provide a low emissions flare. In some parts of the country, flares must also limit their NOx emissions; we offer a burner product capable of achieving that. Our initial orders for flare burners involved upgrading burners within flares already in place. Essentially, customers had bought flares from a different vendor. Those flares failed to perform, or they were unable to satisfy emissions standards. They turned to ClearSign to swap out the burner component, and that's what we did within the existing stack; those orders brought us roughly $200,000-$250,000 for each burner order. More recently, customers have recognized value in having us swap out an expanding share of the equipment. These days we generally replace not only the burner but also the fuel control system, the blower, and even parts of the stack itself. The latest order illustrates this well. We call these system projects, since the whole system gets replaced. Such orders start at the low end around $500,000 and reach approximately $1 million each; indeed, the most recent one landed right about there, $1 million.

Matthew Selinger executive
#67

Alright. We covered that. I believe the latest order placed with us was the fifth one from that customer. As you mentioned, they moved from simply purchasing burner components to a complete system; the most recent full system landed near that higher figure—around $1 million. Is that right?

Jim Deller executive
#68

Yes. That's right.

Matthew Selinger executive
#69

What does our prospective pipeline look like here for this product?

Jim Deller executive
#70

Right. So regarding this particular customer, we've got a single flare set to kick off at any moment. All that's left is one component we're waiting on — and that part isn't something we supply, it comes from another supplier. There's the one we already talked about, and it's now been constructed. As far as we understand from them, another 4 or 5 flares will be required. The exact schedule isn't clear to us at this point, but additional flares with substantial emissions needs are on the way in California, and we think in the Midwest as well. Now, when we consider this technology, we also evaluate it in a horizontal equipment setup, which people usually call an incinerator or thermal oxidizer. In that configuration, being able to combust a gas that's harder to burn, or a waste gas containing lots of inerts, becomes another major cost factor, correct? Normally, customers would need to purchase natural gas in order to fully burn that kind of gas. Thanks to our burners, we can combust it in raw form with no supplemental gas purchases required. We've quoted quite a few projects and hope they'll materialize later in this year on that basis; those we typically also classify under that system projects label. Whether in the vertical enclosed flare configuration or the horizontal incinerator, or thermal oxidizer, configuration, we're looking at a really robust pipeline. In the second one — the thermal oxidizer configuration — renewables applications abound; it's not only refining and wellhead fields. It's moving into additional industries.

Matthew Selinger executive
#71

Okay. We can look to some potential continued momentum in this product line.

Jim Deller executive
#72

Yes. Yeah. Very much.

Matthew Selinger executive
#73

Having said that, Jim, as we move toward 2026 and peer ahead into this year, which milestones ought investors to keep an eye out for?

Jim Deller executive
#74

Yes. At this point, it's really all about growing the company's backlog — bringing orders through the door. There are meaningful opportunities in the market right now. Those orders have to be brought in-house so the backlog lets us reliably reach breakeven and remain at that level. We're securing these sizable refining process heater orders, and by capitalizing on that momentum, the startup along the Texas Gulf Coast will serve as a highly important reference for us. In my view, plenty of people are watching that project. The demonstration on April 23rd, only a couple of weeks away for industry, will matter a great deal. Everything in that push centers on growing the backlog, bringing those orders in, expanding our traction with the refining industry, pushing out with new shapes, getting into more heats, showing what we can do, and capturing more and more of that work. On top of that, the flare systems projects and thermal oxidizer projects — given the size of those orders — can be a very meaningful revenue stream for the company; we're absolutely looking to push and to maximize the references from the installations we get in that segment. When it comes to midstream, there are a lot of quotes out there in that midstream industry, just bringing those in and turning that into a routine business for us.

Matthew Selinger executive
#75

Alright, that's wonderful; those are all the questions I had ready for today. So then, let's maybe take a short break, and after that we'll start taking questions from analysts and investors.

Peter Gastreich executive
#76

Yes, thank you. Congrats on the numbers and on a strong beginning to 2026. And I appreciate you fielding my questions. First, I'm grateful for all the specifics you gave regarding how the burner order is configured. Could you say a bit more about what that implies for the markets you can serve? And how big would you say the opportunity in that market is?

Jim Deller executive
#77

Thanks, Peter. Yes, indeed, it's quite substantial. What pleased us most regarding the SBIR initiative was the burner platform we created. It's definitely an excellent straight refinery burner. Given how the burner technology is designed, we can modify it for various configurations. Regarding those orders we discussed, if I were to estimate, it likely boosts our refining coverage by 20%-25% across just those two formats. Considering more broadly what this burner enables, I genuinely believe it creates an opportunity for us to enter ethylene production, which, as I noted, is roughly equivalent in size to the refining sector overall. Honestly, I'm uncertain about where the limits lie. It's simply a highly adaptable burner design that's extremely versatile, I think, and could likely unlock some fresh markets we haven't even thought about yet.

Peter Gastreich executive
#78

All right, that's helpful. Thanks. During Q4, revenue climbed sharply, and that amount worked out to 70% of what you brought in for the entire year. At the same time, you noted earlier that Zeeco put in considerable work to get 26 burners delivered before the year closed; given that your technology could prove genuinely disruptive, with a sizable addressable market available, orders have room to grow considerably. What's the right way to view Zeeco's capacity, along with the supply chain, when it comes to supporting that kind of ambitious growth trajectory?

Jim Deller executive
#79

Right. So when you look at it, Zeeco is a company worth multiple billions of dollars. Their manufacturing footprint spans the globe. Honestly, it would be great if supplying them became a challenge for us. Around the world, they operate the largest testing site — actually, they've got several of them. As I recall, they're located in that area and have more than 15 test furnaces up there. That's not an issue at all. Beyond that, for our remaining product lines, there are several additional manufacturers right here in Tulsa that we can turn to — companies accustomed to building equipment for combustion as well as the oil sector broadly. That's one reason we relocated the business to this city, along with the talent pool and know-how available here. Trust me, when it comes to ClearSign's other product lines, there are plenty of sufficient resources both inside Zeeco and throughout Tulsa.

Peter Gastreich executive
#80

All right, that's helpful, thanks. I'll squeeze in one final item before I rejoin the queue. Your installed base appears to be tracking along a strong path. When it comes to aftermarket pull-through — maintenance, spare parts, that sort of thing — how ought we to view its contribution to revenue down the road? How big a piece will it end up being?

Jim Deller executive
#81

From our perspective at ClearSign, and drawing on my own background too, this stands on its own as a remarkably significant product line. Profitability is strong here since the engineering and design phases are already complete, and what the customer values is how quickly we respond. Margins are healthy, and as our operations expand and more units are deployed, that trend should keep going. Looking ahead in this space, as additional equipment reaches the marketplace, it's quite possible that in profit margin terms this becomes nearly the biggest revenue contributor for ClearSign. This product line matters a great deal, and we're giving it particular focus right now given how crucial we anticipate it will become down the road.

Peter Gastreich executive
#82

All right, that's wonderful. Many thanks, and well done once more. I'll rejoin the line.

Jim Deller executive
#83

Hey, Peter. Thank you very much.

Amit Dayal analyst
#84

Thanks, everyone. When it comes to how revenue will be paced across 2026, what's the right way for us to think about the quarterly revenue pattern during this year?

Brent Hinds executive
#85

That's a really good question. Looking at it quarter by quarter, for Q1, I can say with confidence that it won't look the same as Q4 2025. When we look at the full year, we have confidence in the 2026 revenue figures.

Jim Deller executive
#86

As we've mentioned previously, because the orders we take are quite sizable and span extended periods, the money coming in will arrive unevenly — correct? You shouldn't expect steady, even quarters, particularly at this point in time. Over time, as the company expands and additional orders are brought in-house, greater volume should help iron that out. Where we stand today, handling these big orders, as I mentioned, things are going to swing around. When you look at the bigger picture, we've discussed at length the enthusiasm from our clients and the opportunities in the proposal pipeline, and once that converts and starts landing, I'd say the company's prospects over the long haul look quite strong. I make a real effort to stay pretty conservative, since my expectation is that near-term results will be uneven.

Amit Dayal analyst
#87

No, I appreciate that. I just wanted to check whether that remains a factor. I'm not anticipating anything different. It's helpful to understand how we ought to think about 2026. And then, looking at things from a balance sheet angle, do you feel at ease, as your orders ramp, regarding working capital needs, and so forth, to fulfill your growth requirements?

Jim Deller executive
#88

Yes.

Amit Dayal analyst
#89

Okay.

Jim Deller executive
#90

Yeah, we’re feeling really good about the cash position we’ve got.

Amit Dayal analyst
#91

Got it.

Jim Deller executive
#92

For those who've just joined us as investors on this call, it's worth highlighting that our projects generally fund themselves. Early on in a project, we bring in sufficient money to cover what we spend executing those orders. Cash isn't something we require. When the big orders in our pipeline arrive, our cash isn't actually needed to carry those orders out. Usually, that money comes to us ahead of the costs or expenses we incur.

Amit Dayal analyst
#93

All right, that makes sense. Thanks for explaining. On this final point — given the macro backdrop right now in the Middle East, in energy, a few of these product rollouts require downtime and so on for customers before they can actually get them up and running. From that angle, do you see the possibility of some delays? I'm not sure — it could be too soon to say — but do you have any view on how that piece of the execu-

Jim Deller executive
#94

Do you mean the Middle East?

Matthew Selinger executive
#95

We lost Amit's line.

Jim Deller executive
#96

Yeah.

Matthew Selinger executive
#97

Let me see if I can get him back on the line for you.

Jim Deller executive
#98

All right, I think his question concerned the Middle East and the turmoil going on in that region. Amit, so those are going to be long-term projects. We have no idea what's taking place over there. Generally speaking, emissions rules across the Middle East don't sit at the same level as the ones in the U.S. The chances are slim that ClearSign technology gets deployed into the Middle East anytime soon. That said, if this ramps up demand and output within the U.S., it could very well create a need for equipment or upgrades domestically. ClearSign might see some upside from that, though to be clear, as things stand right now, I don't see ClearSign products being sent over to the Middle East, simply because there's no need for them.

Matthew Selinger executive
#99

I'll now blend in a question we received on a comparable subject. Someone asked, "Jim, suppose there were huge demand for American goods shipped to that destination — might our manufacturing supply, in a sense, get disrupted? Might we run into problems having our own burners produced, say, right here at home?"

Jim Deller executive
#100

Right, that doesn't worry me. For one thing, these sorts of projects usually run long anyway, but beyond that, if we look at it, the majority are going to be refineries. When it comes to Zeeco, they operate worldwide. They've got manufacturing facilities across the globe. As a matter of fact, they even maintain a production site in Saudi Arabia to support the Middle East. So generally speaking, what we make gets built at a U.S. facility. So right now, I don't view that as an issue.

Matthew Selinger executive
#101

I'll give another follow-up question if I could, Jim.

Jim Deller executive
#102

Absolutely, Jim Deller.

Matthew Selinger executive
#103

Matthew Selinger here, and this came through by email. There's also been some news lately that seems pertinent — quite a bit of talk about what could be the first new refinery constructed in Texas. Are we picking up on anything regarding that?

Jim Deller executive
#104

Naturally, we're all seeing what's come out. A few announcements have dropped during this week. Inside the sector, there isn't a lot of hard, verified information reaching us. We're keeping a close eye on it. At this stage, I'd simply say it has our attention. I wouldn't risk much on it right now. Depending on how things unfold — and they did bring up a hydrogen fuel possibility for that site — should that actually come together, it could matter a great deal to ClearSign. For the moment, let's just say we're monitoring for any updates. So far, no concrete particulars on that have reached us.

Matthew Selinger executive
#105

All right, that's great. Jim, it looks like there aren't any further questions. So with that, I think we can go ahead and close out the call. I'll hand things back over to you.

Jim Deller executive
#106

Alright, thanks, Matthew. And thanks to all of you for being here today, for the interest you've shown in ClearSign, and in particular for making time to hear our call. Next week, on April 15th, we'll be presenting at the Water Tower Research Insights Conference. You can find the company on their website, watertowerresearch.com; we're eager to bring you up to date on our developments and to speak with you during our Q1 2026 call, which will take place in May. Until then, please continue checking our website for developments. For more updates from behind the scenes, please follow us on LinkedIn. So with that, many thanks. Thank you, operator.

Operator operator
#107

Appreciate it; that brings today’s call to a close, and you’re free to hang up your lines now. Thanks for joining us.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete ClearSign Technologies Corporation transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to ClearSign Technologies Corporation earnings transcripts and 132,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.