Home / Transcripts / ClearSign Technologies Corporation (CLIR) · August 19, 2026

ClearSign Technologies Corporation (CLIR) Earnings Call Transcript

August 19, 2026

NASDAQ US Industrials Machinery earnings 53 min

Earnings Call Speaker Segments

Matthew Selinger executive
#1

Good afternoon, and thanks, operator. I'd like to welcome everybody to the corporate update call for ClearSign Technologies Corporation covering the second quarter of 2026. On this call, forward-looking statements are going to be made by the company. If a statement isn't about historical fact, then it counts as forward-looking; remarks regarding projections, expectations, plans, beliefs, and prospects for the company fall into this category. Such statements rest on judgments and analysis made as of today's call date, and they carry numerous significant risks and uncertainties that could lead actual results to differ materially from what those forward-looking statements describe. Among the risks and uncertainties tied to the forward-looking statements given on this call are, without limitation, whether field testing and sales of ClearSign products will be brought to a successful completion, whether ClearSign will succeed in growing the market for its products, and the additional risks laid out in ClearSign's SEC filings, including those addressed in the Risk Factors section of the annual report on Form 10-K covering the period that ended December 31st, 2025. Unless the law requires otherwise, ClearSign takes on no obligation to revise these forward-looking statements so they reflect future events or actual outcomes, and it has no intention of doing so. Joining me today are Jim Deller, ClearSign's Chief Executive Officer, and Brent Hinds, ClearSign's Chief Financial Officer; having said that, I'll hand the call over to Jim Deller. Jim, please go ahead.

Jim Deller executive
#2

Thanks, Matthew. I want to express my appreciation, as I always do, to each of you for being with us on today's call and for the interest you show in ClearSign. Just like we've done for our more recent conference calls, this session will follow a Q&A format. A number of you submitted questions in advance, and those were folded into the set of questions we'll be addressing; for today's call, Matthew is going to moderate a question and answer portion in which we'll walk through the various business units, similar to what we did on prior calls. Many of you probably noticed this already, but questions can be sent beforehand to our investor relations address, mselinger@firmirgroup.com. We'll begin with Brent Hinds, who will review the company's financials for the second quarter of 2026. Brent?

Brent Hinds executive
#3

Thanks, Jim. And thanks to all of you for being with us today. Before getting started, I want to mention that our financial results on Form 10-Q were submitted to the SEC last week. So with that, let me walk through a summary of how we performed financially in Q2 of 2026. During the second quarter of 2026, the company recorded roughly $560,000 in revenues, which compares with about $133,000 during the equivalent period in 2025. That rise in revenues year-over-year came mainly from delivering part of our Flare's system order along with finishing several CFD studies and spare parts orders. Gross profit margin in our second quarter came in at about 41%, essentially unchanged from a year earlier. Our net loss for Q2 fell by $373,000 relative to the same period in 2025. That reduction in net loss was primarily the result of a $368,000 drop in general and administrative expenses. Our general and administrative expenses came down versus 2025, largely because of lower legal fees that had been incurred during 2025 for a special committee of our board of directors, which was ultimately dissolved following our annual meeting of stockholders. Now let's turn our attention to cash. Net cash used in operations during the second quarter of 2026 came to roughly $1.2 million, versus approximately $511,000 during the same period in 2025. That change year-over-year was mostly attributable to the timing of cash collections from customers. At June 30th, 2026, we held approximately $9.9 million in cash and cash equivalents. Now, I think it's worth pointing out that after June 30th, 2026, we brought in additional funds via a private equity offering with an investor who has been with us a long time. We sold 500,000 shares at market value, or rather $3.54 per share, on July 21st, 2026. That contributed roughly $1.7 million in net proceeds to our cash balance. Taking this cash addition into account, our pro forma cash balance as of June 30th, 2026 would be about $11.6 million. As stated on our Form 10-Q, as of August 8th, 2026, we have 6.8 million shares of common stock outstanding. This share count reflects our most recent share offerings. With that, I'd like to hand the call over to Matthew Selinger.

Matthew Selinger executive
#4

Appreciate that, Brent, for walking us through the financials. Jim, thanks to both of you for being here with me today. Why don't we kick things off at the corporate level, so to speak, and go over a few recent developments there, if that works. Jim, Brent brought up a capital raise that happened not long ago. Could you give us some insight into how the decisions were made around those raises that just took place?

Jim Deller executive
#5

Absolutely, happy to address that. So, to begin with, a group of investors who've been with us for quite a while came to us. They let us know they'd like to pick up additional shares. Looking at it from where the company sits, a healthier balance sheet is never a bad thing, particularly when you're sitting across the table from major clients. So we proceeded and put together a modest strategic raise — it was priced in line with the market and involved common stock exclusively. After that, an individual private investor with a long history with us got in touch, saying they wanted to add to their stake so their ownership percentage would stay the same. Once more, we did a straightforward direct placement, this time also at market pricing, and once again it was all in the form of shares.

Matthew Selinger executive
#6

All right, sounds good. One more thing we made public just last week — that's when we shared the news that Larry Saddler, who previously served as Exxon's global technology leader, has come onto the board of directors. Jim, you and Larry go back some time, I believe, so perhaps you could share a bit of context about that connection.

Jim Deller executive
#7

Absolutely, and I do. To start with, I'm very happy that Larry made the choice to come on board with us here at ClearSign. Larry and I go way back — I believe our first encounter was during the 1990s. At that time, he was doing work at the Baytown Refinery for ExxonMobil. The two of us have collaborated. After I came to ClearSign, I made sure to keep my connection with Larry going. As some context, Larry moved upward through the ranks at ExxonMobil, handling technical supervision of fired equipment — that covers heaters along with burners — and eventually reaching the corporate side, where his responsibilities involved policy oversight and the way the company evaluates thermal performance as well as emerging technologies. From where we sit, what he brings in terms of expertise and perspective is hugely important for ClearSign. More broadly, he's an outstanding individual with an excellent standing across the sector.

Matthew Selinger executive
#8

You and I discussed this, as I recall, and you brought up that before signing on with us, he was hoping for a chance to personally view the most current and advanced burner technology.

Jim Deller executive
#9

That's right. Larry brings a great deal of experience to the table, and he's quite careful — sensibly so — about whose team he decides to sign with. Before he said yes to coming aboard, he wanted the opportunity to visit and observe the ClearSign technology firsthand, so he could confirm for himself that it matched what our reports and advertisements claimed. As it happens, Larry arrived before the customer demonstration we held earlier this year, back in April. He passed the day with us. He ran his own tests; we were with him throughout the day, and essentially we let him steer the testing, kicking the tires on the burner and the technology. After that, he remained for the demonstration day itself. And clearly, from that point on, he has said yes to joining the company. Speaking for all the directors, we're truly delighted that Larry is now with us.

Matthew Selinger executive
#10

Okay, I believe this represents an excellent enhancement for both the board and the organization. Now let's turn our attention back toward ClearSign's operations and the various product lines. During the past few calls, as I recall, we have tried to provide a bit of insight regarding the pipeline when it comes to proposals across the product lines, which covers process burners as well as the M Series midstream burners. On one of those earlier calls—I believe it was the most recent one—we ended with something you said, Jim, which I'll repeat: we had roughly 50 proposals or thereabouts outstanding for the M Series. Since that call took place, we have reported orders for 6 M Series burners. That works out, using rough calculations, to somewhere around 10%-12% of that backlog having been converted into orders. Could we begin by discussing a few of those M Series orders?

Jim Deller executive
#11

Yep. Certainly.

Matthew Selinger executive
#12

All right. In terms of when they came in, Tulsa Heaters Midstream placed the earliest two, and those are expected to be delivered to a West Texas operator. Could you share additional details about those initial two orders?

Jim Deller executive
#13

Right. So, if you aren't familiar with them, Tulsa Heaters Midstream is a manufacturer of midstream heaters, and they're located right here in Tulsa, as you'd expect. Our new M1 burner was installed by them first — it went to a chemical facility on the Texas Gulf Coast, and it performed extremely well. They know our burners well. The new orders we're talking about are headed to what we call a multinational energy company, located in the Permian Basin in West Texas. For us, this is likely the largest midstream area in the United States. When it comes to these first 2 burners, they are new heaters. The same customer is receiving them — in fact, they're going to the same site.

Matthew Selinger executive
#14

Right, so there are two of these, and my understanding is we called them big M1s — and they came in as distinct orders, is that right?

Jim Deller executive
#15

That's correct.

Matthew Selinger executive
#16

Yeah.

Jim Deller executive
#17

My understanding is that it's the same client project, but the heater orders came in sequentially, and once Tulsa Heaters Midstream got that order, they then placed their own order with us.

Matthew Selinger executive
#18

Alright. Following those 2 separately, once more, for that identical end-use customer, we received an order covering 3 burners from another heater maker, and that one too was headed to West Texas.

Jim Deller executive
#19

You've got that right. In this case, it's a separate end user. Once more, it's a Fortune 500 midstream company operating in the Permian Basin, so the circumstances are quite alike. Each of these two is unquestionably a first-rate customer, with plenty of assets and plenty of requirements. All 3 of these units are headed, for the same customer I believe, to the same location. They're also quite big M1 Series burners.

Matthew Selinger executive
#20

The same size. These first, five are all these.

Jim Deller executive
#21

They truly do. When it comes to ClearSign and what it means for our efficiency, what stands out is that all five burners are identical in size — 2 of them are headed to Tulsa Heaters Midstream, while the remaining 3 are going to the second customer.

Matthew Selinger executive
#22

All right, we're going to get into scale — that is, the dollar figures — in just a second. I realize it's also worth getting into this order, since it originated with a heater manufacturer that's not the same one. I'm aware we didn't say who they are, but I'm aware that in our prior conversations on this subject, handling this order works somewhat differently on our end. Is that right?

Jim Deller executive
#23

Yes, it is. For quite a while now, we've been examining how scalable ClearSign's growth can be, and we came to see that an operation built around royalties or licensing offers tremendous capacity to scale up; this order follows that model; the customer in question is capable of producing burners. What they've really bought is the entitlement to build these burners on their own using ClearSign's drawings; the manufacturing isn't something we're handling. Inspection is where we'll have a role; naturally, we'll verify that they function properly, but this represents an initial move toward, ideally, establishing a royalty business that we can expand going forward.

Matthew Selinger executive
#24

Alright, that's quite intriguing. Let me make sure I understand — the company producing those burners is the heater maker, correct? It isn't the customer who uses them in the end.

Jim Deller executive
#25

Correct.

Matthew Selinger executive
#26

Yep.

Jim Deller executive
#27

Yes.

Matthew Selinger executive
#28

All right. Still, Jim Deller, it's noteworthy that ClearSign has concentrated on technology—clearly zeroed in on margins at the technology level. With this licensing approach, what did the profit picture look like? And second, is this a kind of model we're going to keep going after?

Jim Deller executive
#29

Right. Our technology is what we rely on here. With the M1 Series burners, customers get substantial benefit, since these units let them meet even the strictest NOx rules. On every one of these burners — the Tulsa Heaters Midstream burners — we have kept, and we continue to keep, the same profit margin dollars.

Matthew Selinger executive
#30

Yep

Jim Deller executive
#31

Plus, there are orders being fulfilled through this licensing-style arrangement. ClearSign Technologies keeps the same margin. Naturally, with licensing-type agreements, revenue comes in lower, since instead of ClearSign Technologies getting burners made by an outside fabricator and sending them to the customer, the customer handles the fabrication on its own. So revenue goes down. The profit margin dollars stay identical, whether we sell the finished burner or it happens through a royalty-style setup.

Matthew Selinger executive
#32

All right, excellent. So to wrap up those six orders, only a matter of weeks back, we got one more M Series, this time also from Tulsa Heaters Midstream.

Jim Deller executive
#33

Yes.

Matthew Selinger executive
#34

This order was a little bit different. Is that correct?

Jim Deller executive
#35

For them, this is a less powerful heater with a reduced burner component, dropping to that identical size and serving the very same customer as the initial pair.

Matthew Selinger executive
#36

All right. There's the smaller one and the bigger one, and M1. If that's okay with you, let's take each of those apart.

Jim Deller executive
#37

Sure.

Matthew Selinger executive
#38

Could you tell me what the M Series would be priced at? Perhaps you could discuss the model's size — the M1, or maybe an M25.

Jim Deller executive
#39

When it comes to our M1, that's the most advanced high-tech burner we offer. The NOx emissions levels customers can reach with it deliver real value for them. As for where the M Series sits price-wise, it's the luxury version.

Matthew Selinger executive
#40

Yep.

Jim Deller executive
#41

That figure is larger. The M25 burner variant has been tuned down a bit. It aims at a NOx standard that isn't as strict; its price point is set so it can compete with certain other burner offerings available in the market. Pricing for the M25 sits below that of the M1.

Matthew Selinger executive
#42

Yep.

Jim Deller executive
#43

For example, the large M1s will go up north of $200,000 per burner.

Matthew Selinger executive
#44

Yep.

Jim Deller executive
#45

The small M25s are going to run down probably in the $40,000 per burner.

Matthew Selinger executive
#46

Okay.

Jim Deller executive
#47

Range.

Matthew Selinger executive
#48

Five of these were these large M1s, correct?

Jim Deller executive
#49

Right, so those aren't the biggest M1s out there. I said more than 250, but as a full burner, each one came in just under 200. Of course, with the royalty structure in place, the price tag drops, though the margin holds steady.

Matthew Selinger executive
#50

All right. There are a couple of factors that determine what these sale prices cost within the model. At the upper end, that would be the large M1.

Jim Deller executive
#51

Yep.

Matthew Selinger executive
#52

The figure you mentioned was around $200,000 or possibly higher. The smaller M25 would sit at the lower end of that span.

Jim Deller executive
#53

Yes.

Matthew Selinger executive
#54

Okay. People can at least understand what the range.

Jim Deller executive
#55

Correct. We've provided broad direction—no specifics—of $100,000 for each burner. That figure probably reflects the entire range. Usually, once we've determined that they qualify as a large M1, it clearly sits near the top of that range.

Matthew Selinger executive
#56

Jim, in lieu of these recent sales, how does that continued pipeline still look?

Jim Deller executive
#57

The demand picture remains quite strong. Inbound interest keeps coming our way; pinning down an exact answer is somewhat tricky, since what we observe is that these customers now know ClearSign burners well, and they fold those burners into their own customer proposals without always approaching us for pricing, given that they already hold quotes for the size they typically deploy. Quotes exist with end users that we aren't even aware of, and that's surfacing now during discussions, where all at once things progress rapidly on projects we aren't even monitoring, because we genuinely don't know each and every application where our heater manufacturing customers are incorporating ClearSign burner technology into their talks with their end-user customers.

Matthew Selinger executive
#58

Understood. Even if we went ahead and included that pipeline of roughly 50 potential proposals, the figure would still be a conservative one.

Jim Deller executive
#59

I think that's a good number, yes.

Matthew Selinger executive
#60

All right, that sounds fine. Jim, let's move on to process burners, plus a few of the larger projects we already have underway; earlier, we told you about an order covering the following stage of a project involving 32 process burners at California Refinery.

Jim Deller executive
#61

Yes.

Matthew Selinger executive
#62

What's the status on this initiative? Perhaps you could provide a bit more detail on it too.

Jim Deller executive
#63

Yeah. This particular one is progressing exactly as expected. In fact, we put out an announcement about an order covering detailed engineering plus testing for this project. That effort is moving along nicely. Once the burner had gone through computer modeling along with the engineering work, it came out looking excellent. The customer has reviewed it. Everyone there supports it. Manufacturing of this burner is currently underway, and it should be placed into the test furnace over the next several weeks. The truth is, we haven't yet observed this burner operating for the very first time; however, my reasoning for believing this marks the initial occasion is that it genuinely differs from every burner we've previously released. The flexible fuel technology we created with support from the SBIR grant provided us with a burner platform

Matthew Selinger executive
#64

Yeah

Jim Deller executive
#65

that was highly configurable; we've talked about this on previous calls.

Matthew Selinger executive
#66

Yeah.

Jim Deller executive
#67

The burner here is completely distinct. It's a long and narrow burner, built so that the flame travels upward along the client's heater wall.

Matthew Selinger executive
#68

Called a flat flame?

Jim Deller executive
#69

I generally call it a flat flame.

Matthew Selinger executive
#70

Yep

Jim Deller executive
#71

The burner is being tested because of that. We're going to have it in the test furnace. We'll fire it up, and once everything is approved and finished, the client will get to see it. After that, our expectation is that we move into the manufacturing stage, producing these burners for the initial heater retrofit project in California.

Matthew Selinger executive
#72

With this new application, our addressable market expands by a factor of two. The first part is fairly near-term, and second, doesn't this open up yet another possible route for us?

Jim Deller executive
#73

Right. Something that works in our favor with configurable burner tech is that we can now install burners in heater types that ClearSign burners could never reach previously. That means heaters that require burners which are long and flat — our addressable market grew because of this. All at once, an entire set of additional heaters turned into solid prospects for ClearSign technology. On top of that, thinking ahead, certain very big, more sophisticated, higher-temperature processes exist — delayed coker furnaces in particular, and after that ethylene furnaces — where flat flame burners are the norm. The burners we are providing for this particular order, which is headed to a refinery, cannot simply be taken and dropped straight into those processes. Additional development work is required; even so, this represents a major move toward that goal. First, on the technical side, through creating these burners, I believe you also demonstrate to the broader market that our burner technology can adapt, and that it can be evolved for these fresh applications; those matter a great deal since, if you consider those processes, instead of one heater, when you reach something like an ethylene facility, you might find 7 or 8 or even more heaters lined up together, each one identical; therefore a burner order for that kind of site could number in the hundreds instead of tens of burners.

Matthew Selinger executive
#74

Numbers in the tens, and in the twenties as well. All right, that’s surprising. In that case, let’s move to a different project. We’ve also discussed the other one — a 36 burner order that is scheduled for Texas — and that one is not the same either. Could you describe a bit how this particular one is different, and then perhaps provide where this project currently stands?

Jim Deller executive
#75

Alright, yes. So these burners aren't the same — they differ in their own particular manner. The shape is round, yet the firing happens horizontally, meaning opposing apertures sit on each side of a heater. The flames from these burners shoot toward one another. Once more, a considerable quantity of heaters share this setup. Demonstrating our capability here, I believe, is beginning to unlock that market segment for us. A somewhat different status report on this effort. We received the original purchase order covering engineering plus the CFD; that portion has proceeded extremely well. The burner performed impressively. All signs remain positive. Regrettably, the client's financing has encountered certain delays. This stems from something within the company itself. I'm not really able to state precisely what is happening there; however, what we've been told is that this project is currently paused, pending a resolution to that financing issue. We'll find out before things restart. We'll need to keep everybody informed about that. As things stand, that project has movement.

Matthew Selinger executive
#76

Okay. All right.

Jim Deller executive
#77

As far as it will today.

Matthew Selinger executive
#78

Finally — and this is certainly not the least important item — there is an order for 26 burners destined for a petrochemical business located along the Gulf Coast. This particular one has been a topic of our discussions for quite a while.

Jim Deller executive
#79

Yep.

Matthew Selinger executive
#80

I believe everyone's eager for this project to be installed and brought online. What's the current status on that front?

Jim Deller executive
#81

Things are proceeding exactly as planned; at this moment we're completing instruction on the requirements specific to the location, with personnel traveling to where the work will happen. We're also sorting out a few final spare parts that the customer wants available, though that's being handled straight with them. We're eager for the installation and the startup. All of it is moving along precisely as scheduled.

Matthew Selinger executive
#82

You mentioned this to me as well, and during our previous call we noted that, in our view, plenty of folks are trapped within this industry — prospects among them, and other customers too — who are paying attention to what's happening.

Jim Deller executive
#83

Yes, absolutely.

Matthew Selinger executive
#84

Right. So moving on from that, what's your take on the pipeline for the process burners? What's your sense of how that pipeline is shaping up?

Jim Deller executive
#85

Honestly, this is thrilling for me. To wrap things up, we've got quite a few projects underway. The one on the Gulf Coast is clearly furthest along — it's just sitting there waiting to be installed and brought online. Then there's a refinery job heading to California that you mentioned, plus a few other startups. But get this: across just 3 sites that are in startup mode at the moment, 3 customers have told us about more than 20 heaters they intend to bring to ClearSign — at minimum 4 proposals. Sure, a bird in the hand beats a bird in the bush, and those are orders we already have. Still, plenty of possible work hinges on what our customers learn once they watch these projects get up and running.

Matthew Selinger executive
#86

Jim, could you jump in here? Let's bring that up once more. You brought up only 3 customers, mentioning a small figure — 20 heaters per month going to those 3 — and I realize we've pointed to one of them on earlier calls, with that one alone accounting for roughly 10. If you were to put a rough dollar figure on the heater in this case, what would it come to?

Jim Deller executive
#87

Yeah. As you can see, the heaters vary greatly.

Matthew Selinger executive
#88

Delivered. Yep.

Jim Deller executive
#89

When it comes to how big they are, I'd say — considering that CFD comes bundled in along with the engineering work, and even if we're being cautious — you could put it at a nice round $2 million in terms of revenue.

Matthew Selinger executive
#90

Yeah

Jim Deller executive
#91

Per heater, I think that's a safe number.

Matthew Selinger executive
#92

Okay. Is that just a snapshot of what you're seeing of the advanced conversations?

Jim Deller executive
#93

Yes.

Matthew Selinger executive
#94

Okay. All right. Now let's turn to the flare product line. Previously, we discussed having a few first installations, with some sizable full-scale products going in. What update can you give us on the flare product line?

Jim Deller executive
#95

The past quarter was quite busy for us. To start with, we've got a project in California in which the burner element inside an already-installed flare was swapped out; the flare in question had been bought by this customer from one of our rivals. It wasn't functioning as it should. Essentially, they approached us to make it right. What we provided was a ClearSign flare burner meant for mounting within that flare. The install proceeded without issue. Startup has now occurred on that project. Source testing has, in fact, already been completed. We haven't yet received the official test report. Even so, both we and the client were present while the data was being collected, and the outcome made everyone very happy.

Matthew Selinger executive
#96

It went really well.

Jim Deller executive
#97

Yes. We’re anticipating very positive developments. That customer at another location is right now taking delivery of components for our initial complete system flare. This is a flare we’re constructing entirely anew for this customer. The stack along with most of the machinery is already at the site; it’s moving through the installation phase. A small amount more has yet to show up. Startup should occur over the next several months. In our view, that customer has additional permitting efforts they’ve pinpointed for ClearSign equipment.

Matthew Selinger executive
#98

About the flare product line, could we discuss how pricing has changed, for want of a better way to put it? I will frame this in terms of the project and what the project covers, all right? Again, with many of our products, we begin by saying, "Hey, we will mark $100,000." Right?

Jim Deller executive
#99

For the flares especially, this is really important.

Matthew Selinger executive
#100

Yeah.

Jim Deller executive
#101

Taking that initial project as our benchmark, where a ClearSign special burner was installed in the flare — just that flare portion alone, the remainder of the setup, I can't recall exactly, ran about $150,000 to $200,000, roughly in that range. From that point onward, we've managed to grow this product offering into something we refer to as a full system.

Matthew Selinger executive
#102

Yep.

Jim Deller executive
#103

Instead of only providing the burner, what we now offer is the full package — the controls, the blower, the stack, plus all the rest. According to the proposals, those have generally fallen somewhere between $750,000 and $1 million. The unit presently being installed and shipped out to that client site will be part of that. If you go through our proposal listing, the biggest one we received a quote for actually reaches roughly $1.5 million; because of that, and given the quotes coming in, this has genuinely become a completely new product line for ClearSign. With the level of interest we're seeing, it's also developing into a solid revenue stream.

Matthew Selinger executive
#104

Yeah. It does not take many of these to move the needle for us.

Jim Deller executive
#105

Exactly.

Matthew Selinger executive
#106

All right, so stepping back for a moment — Jim, we've already gone over several different product lines. If I were to put the question to you about how you view where ClearSign's business stands in general right now, what would your read be? What's your sense of it?

Jim Deller executive
#107

My outlook is quite positive. Based on what we've just been talking about, bringing those M1 burner projects to the major customers in the Permian Basin — once those customers witness what our technology can do and come to prefer those burners, and they begin including ClearSign burner technology as part of their heater purchases, that represents a tremendous opportunity in this market. That's a really significant step forward.

Matthew Selinger executive
#108

That was only two customers, right?

Jim Deller executive
#109

Yes.

Matthew Selinger executive
#110

The split was essentially 3 and 3. Although the way the orders arrived varied, we're talking about 2 big customers.

Jim Deller executive
#111

Yep.

Matthew Selinger executive
#112

At essentially a single location, we ended up with three plus three. It's clear that both the capability and the desire are there.

Jim Deller executive
#113

Right, so these customers own numerous locations and hold substantial assets throughout that area; they're really major accounts. Beyond that, ideally, being able to build a royalty sale operation and grow it further is quite encouraging for ClearSign. We discussed the flares.

Matthew Selinger executive
#114

Yeah.

Jim Deller executive
#115

Naturally, this particular product line — and it isn't just that single customer involved — we've also submitted bids to additional customers. As these startups grow and we turn them into complete system projects, the flare product line is becoming quite substantial for us.

Matthew Selinger executive
#116

Yeah.

Jim Deller executive
#117

There's no limit to how highly I can speak of the process burners; clearly, we do have additional bids pending for the process burners, yet the truly significant development at this point is simply bringing these startups into the field, and what customers are telling us regarding their intentions to partner with ClearSign once they personally get that initial direct exposure to the equipment is genuinely heartening when it comes to lasting worth for ClearSign.

Matthew Selinger executive
#118

All right, so for the remainder of the year, what is it that investors ought to be paying attention to? I realize we've already pointed this out, but what should folks be watching?

Jim Deller executive
#119

To start with, this one is quite straightforward. For ClearSign, this Texas startup is going to matter a great deal—it's hugely significant. Everyone here is thrilled. As of now, it's set for October, and the moment we have results back, we'll share them with all of you. On top of that, there's the large flare currently being installed. We'll get it up and running. We believe new permits are moving forward, so we anticipate those being finished. Following that, we look for additional orders to come through from the flare product line. Just stay alert for M Series. The M Series move pretty fast. When orders arrive, we don't always have early involvement, and things can shift from no awareness at all to locking down specifics and placing an order in a very short window. So there may be additional work coming in from other industries too.

Matthew Selinger executive
#120

All right. So, Jim, ahead of moving on to the Q&A, is there anything further you'd care to add?

Jim Deller executive
#121

Yes, I would. I think it helps if everybody understands what our activities are right now, and I also want to give recognition to the folks at ClearSign. This quarter has us incredibly occupied. Regarding the items we've discussed, a startup is arriving from Texas. In California, a flare installation is underway for a startup; a great deal of testing is happening; and in fact, we have additional startups as well. We've reached the stage where we're planning our resources very cautiously so that every bit of this work stays covered; a large amount of real work is being completed this quarter; given all that, from where I sit, it's simply a matter of acknowledging the ClearSign team, since they're performing excellently; they're becoming incredibly occupied with plenty of site work, startups, and testing. I just want to express appreciation for how committed they are; all of them are quite enthusiastic and highly concentrated on what lies ahead for us.

Matthew Selinger executive
#122

Great, so at this point we're ready to move into Q&A. Operator, could you please take a moment to run the polling, and then we'll transition right into the question-and-answer session.

Sameer Joshi analyst
#123

Hi there, good afternoon, everybody. Jim, Brent, Matthew — I appreciate you all fielding my questions. My focus is going to be on the M1 Series. In this case, you've got 3 burners scheduled for delivery in Q3, and after that, 2 plus 1 coming in Q4. What I'd like to get clear on is how the ClearSign Core M1 differs from simply a smaller burner in the M1 Series. Where does that difference show up — in size, or perhaps in price as well?

Jim Deller executive
#124

Thanks, Sameer. Several points set these apart. What we've typically referred to as the ClearSign Core is essentially the ClearSign IP — that's the burner's architecture, which is what lets us achieve the NOx emissions we deploy across our flare burners, our process burners, and the M Series. As it pertains to your question about the M Series burners, the M1 Series incorporates a highly advanced nozzle configuration inside the burner that manages mixing, which in turn governs the chemistry, and that's what brings our NOx emissions down to the low single-digit range. The M25 — the sibling product line positioned as a more competitively priced offering — doesn't reach those same NOx levels; we got there by making the burner design simpler. Basically, the M25 lacks all those intricate, high-tech blow controls. Looking at it purely from a manufacturing standpoint, the M25 uses less metal and requires less labor. In my view, when it comes to setting price, I'd say it doesn't carry all the cutting-edge IP that goes into the M1. With the M1, that's what makes it possible. The M1 genuinely occupies a distinctive spot in the marketplace, and we think that delivers tremendous value to the customer, since it lets them sidestep things such as catalytic conversion units that would otherwise be required to bring their NOx levels down to these new 1 levels we're beginning to observe.

Sameer Joshi analyst
#125

Got it. We can picture the burner project in California with 32 burners, and we can picture several of the other projects too. But when it comes to midstream, order sizes sit at two and three. How should we picture those being put to use at the site, and what's the largest order size by count — say four, five, six, or 15 — that a single site might generate?

Jim Deller executive
#126

All right. That

Sameer Joshi analyst
#127

Anyone can take it.

Jim Deller executive
#128

That's quite an interesting one. Yeah, it's a really fascinating question. A major distinction when it comes to M Series uses in midstream is that those heaters are usually fairly small and basic, equipped with just one burner. So if we sell a midstream burner to a heater manufacturer such as Tulsa Heaters Midstream, it's destined for a single burner. If we get an order for 2 or 3 burners, that indicates the customer is supplying 2 or 3 separate heaters to the same end user, and those will generally be installed next to each other at that end user's location. Now, regarding order size, we've had inquiries covering slightly under 30 burners in one batch for midstream heaters. So opportunities exist where many heaters are being evaluated and need the same technology for upcoming projects. There's clearly potential for big multi-burner projects. Within midstream specifically, though, it's usually one burner per individual heater. That means an order contains many small heaters, instead of several burners feeding one heater, which is what we'd encounter in the refinery heater process burner product line.

Sameer Joshi analyst
#129

Sameer, got it. That's useful. So it's obvious you're speeding things up. The number of quotes you're handling keeps growing. You're shipping items that were slated for the third quarter, the fourth quarter, and beyond. What's the right way to think about the run rate as we leave 2026 behind? And then perhaps I could ask, at what point might we witness top-line revenues in the double-digit millions? Does that happen as a possibility in 2027, or does it fall on a later timeline, 2028, for witnessing revenue growth beyond $10 million?

Jim Deller executive
#130

Jim, yes. I believe everyone is examining the same set of facts. Providing precise figures doesn't strike me as sensible, since clearly we're discussing many orders in the future along with matters beyond our control. What we're considering right now, and what I genuinely think matters for reaching those double-digit revenues, is the interest along with the proposal backlog and inquiry backlog that we're observing, particularly regarding the process burners, which we expect will open up once we have these process burner installations operational, above all that project on the Gulf Coast. Since we're observing interest in the flares averaging around a $1 million range, plus the interest we're noticing in midstream, I think it's plausible we might reach a run rate of $6 million-$7 million, at minimum in sales from midstream and the flare product line by themselves. Given that interest in the process burners, which we expect will become activated once we have these large projects operational, I believe there's definitely potential to reach those figures you're mentioning, at minimum in sales. As we bring orders in, converting them into revenue takes time; that's likely the largest question, namely the timeline. Yet regarding the opportunity, I hold strong confidence that a double-digit million opportunity exists for ClearSign.

Sameer Joshi analyst
#131

Alright, understood. Maybe one last item. It ties in a bit with what you were just talking about. On the 32 burner — the flat burner — my understanding is that it's a retrofit at a refinery. Physical testing is going on right now, and I just wanted to learn how that timeline is shaping up. I know you may not be the one controlling it, but as far as the actual physical testing being done and the amount of time it takes before you start shipping those 32 burners, could you also give us a sense of how quickly that will go? Is it going to be three burners each quarter, or one full order of 32 burners that has to be delivered in a matter of a few months?

Jim Deller executive
#132

Yeah; so I'll tell you what I'm aware of. At this point, like you said, not every one of those dates is under our control. That said, the burner intended for testing is in production right now; installation ought to happen in the coming couple of weeks. We have to get those test burners prepared; after that, typically the run-in period, along with setting up the witness with the customer, takes three to four weeks; therefore I expect the customer to witness that burner around early October. Once again, these are just expectations. We can't make any promises on timing, because the customer's schedule isn't something we manage. This is the first time we've actually fired up one of our flat flame burners. Following that step, the customer would need to send us a purchase order covering the fabrication work for that initial heater. When that might occur, I can't say. Once the order arrives, building it would probably require somewhere between three and four months. Naturally, we'd love for them to place that order as soon as possible, though in the end we have no say over it. I hope that gives you enough to start putting together a timeline. From there, our expectation is that the customer will go ahead and buy the fabrication and take delivery of one unit. This project involves two heaters, with 32 burners distributed between them. The customer has communicated their plan to start by purchasing enough burners for a single heater, complete that shipment, and afterward move ahead with the second heater. As a result, we anticipate that manufacturing will occur across two separate phases.

Sameer Joshi analyst
#133

Got it. All right, I appreciate that. I'll move back in the line.

Jim Deller executive
#134

Thanks, Sameer.

Peter Gastreich analyst
#135

Thanks. Nice work on the numbers; it's encouraging to watch things picking up steam with the M Series process burners as well as the flare lines. And I truly value how much detail you gave us in the prepared remarks, so I've only got a few follow-ups here. To start, your most recent board member, Larry Saddler, seems like a real win for the business. You said he spent some time evaluating ClearSign technology prior to signing on to the board. Could you say more about that?

Jim Deller executive
#136

Thanks, Peter. Sure, I can. I'd rather not put too many words in Larry's mouth, but clearly we spoke a great deal while we were talking about him coming aboard at ClearSign, and I was there alongside him when he made the trip to our test site at Zeeco and spent time with us. Folks who've built up broad experience in this industry often have specific tests they want to run on burners to confirm how rugged and dependable they are, and those tests sit outside what a normal customer would specify. Without going into specifics, one item on his list during the visit he made to spend time with us was running the burner through what I'd describe as extreme cases and extreme tests, checking both stability and ruggedness of the burner, clearly to look at NOx emissions and how the burner performs over a very wide spread of fuels, going past what you'd normally show at a customer job site. It gave him a way to kick the tires and genuinely watch the burners operate beyond, let's say, the comfort zone of a standard operating envelope. He truly put the burner through its paces, and that's the reason he came in on his own for a day. It made me quite happy that he decided to remain and be with us on the demonstration day when we had plenty of other customers there. He had the chance to speak with many others from the industry, in fact ran into some old friends. We also got to observe how they responded to the ClearSign technology.

Peter Gastreich analyst
#137

All right, thanks. Next, you referred earlier to this year's burner victory as the stepping stone, reforming furnaces along with steam methane reforming. I understand that for you this represents a more distant goal, but how would the path forward look from this point, when it comes to R&D, qualifications, partners or any other elements we should be considering here, and what kind of realistic timeline applies to these markets?

Jim Deller executive
#138

Yes. Thanks, Peter; that's a solid question, particularly when you're examining ClearSign's long-term possibilities. To give a little context, the flexible fuel burner is something we've characterized as a burner platform providing flexibility. Lately, the burners headed into testing represent the initial flat flame version of ClearSign technology, showing the adaptability this new flexible fuel burner brings us. The money and the hours required to take that burner and subsequently engineer it for the more advanced technology and the severe operating conditions like those found in a downfire methane reformer or an ethylene furnace are substantial. That is indeed on our horizon. My intention is to genuinely locate an industry client interested in that technology and collaborate with them as a partner throughout that effort. Since while you're engineering something, you truly want an end user site secured as soon as possible to guarantee you have a destination for the project, and likewise to guarantee a client is engaged in the effort so you're creating a product matching their requirements, rather than creating a product and afterward expecting to locate a client for it. So we remain open and definitely have had preliminary discussions with clients who've voiced such interest. I believe interest exists in the market. A timeframe for that is unknown to me. It's likely open-ended. My assessment of when, once we begin, the SBIR project to create a flexible fuel burner required roughly 2 years from beginning to completion. I'd anticipate that developing one of these burners, my best guess, would take around a 2-year span to accomplish once underway. I'd want that to be partly financed by our industrial partner and to have a project arranged by its conclusion, provided all goes well; regarding resources, the test burners or the test complex Zeeco possesses, test furnaces appropriate for ethylene burners and downfire reformer burners. That's a burner technology that, in terms of resources for the testing and the expertise of those of us at ClearSign, we've engaged with these technologies previously. We simply haven't yet brought ClearSign technology into that form.

Peter Gastreich analyst
#139

All right, understood. My apologies.

Jim Deller executive
#140

Honestly, I'd flip that question back on everyone and need to justify why we'd even pursue it, since this clearly represents a fairly large undertaking. Ethylene is a huge market. Based on where I come from, the burner potential within ethylene processing by itself matches the whole refining sector's opportunity. Downfire reformers aren't as large overall, but a single one can contain more than 100 burners. So that's a substantial market too. Clearly, our plan isn't to ease up on process burners. We'll keep working on flares, midstream burners, and process burners. To me, this represents ClearSign's future growth path — how do we widen our markets further, make ClearSign larger, and capture more and more opportunities? It won't detract from our current efforts; it's simply another layer in how we expand ClearSign going forward.

Peter Gastreich analyst
#141

All right, that sounds excellent. Appreciate it, Jim, and once more, congratulations to both you and the team — I'll rejoin the queue.

Jim Deller executive
#142

Thanks, Peter.

Matthew Selinger executive
#143

Operator. Yes. Let me jump in with a question that came through by email. Jim, a few inquiries have come our way regarding the sales team and the way your outreach operates. Could you sort of walk us through that sales process and outreach?

Jim Deller executive
#144

Yeah. I'd say I generally discuss sales across the industry as a whole. Once you begin to grasp the business, you see how it's probably unlike a lot of others; what we offer customers is a technical solution, and that means collaborating with them so the ClearSign technology fits their heaters and their control systems, plus planning out the projects. A big chunk of the real selling work is that cooperative back-and-forth with our counterparts at the engineering companies, the heater manufacturers, and the technical leads on the refineries. At ClearSign, we have some of the most seasoned engineers and computer modelers in the industry. We have plenty of ties within the industry and certainly plenty of reputations. That plays a very large role in landing orders. There's also, naturally, there's outreach. We're constantly trying to get more people to know what we do, and that's how those conversations begin. We have 1 person full-time dedicated and others constantly out at conferences reaching out to new clients. We also have quite an active social media outreach. I'm sure many of you are following us on LinkedIn as well. They bring the leads in, but most of our sales activity is actually very collaborative sales based on the experience and the connections that we have throughout the industry.

Jim Deller executive
#145

Thanks, operator. I appreciate all of you for your interest in ClearSign and for making time to hear our call today. We’re eager to bring you up to speed on what we’ve been developing, and we’ll talk with you again on our Q3 2026 call in November; until then, please keep an eye out for news on our website. And if you’d like more behind-the-scenes updates, give us a follow on LinkedIn. So, I truly value the time you’ve given us. Thank you so much.

Operator operator
#146

That brings us to the end of today's call, so you're free to hang up your phones now. We appreciate you taking part.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete ClearSign Technologies Corporation transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to ClearSign Technologies Corporation earnings transcripts and 132,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.