ClearSign Technologies Corporation (CLIR) Earnings Call Transcript
November 19, 2026
Earnings Call Speaker Segments
Good afternoon, and thanks, operator. I want to welcome all of you to ClearSign Technologies Corporation's Third Quarter 2026 Corporate Update Call. During this call, the company will present forward-looking statements. Anything that is not a statement of historical fact is considered a forward-looking statement. That includes comments about the company's projections, expectations, plans, beliefs, and prospects. These statements are based on judgments and analysis as of today's date, and they carry numerous significant risks and uncertainties that might cause actual results to differ materially from what the forward-looking statements describe. Uncertainties and risks connected to the forward-looking statements in this call cover, though aren't restricted to, these items: whether ClearSign's products will see field testing and sales brought to a successful conclusion; whether ClearSign manages to broaden the market for what it sells; the timing of orders from customers along with how well we turn proposals into orders; delays, holds, or cancellations affecting customer projects; how our products perform in the field and the warranty costs that follow; our dependence on original equipment manufacturers and other third parties; how we secure additional financing; plus further risks outlined in ClearSign's SEC filings, among them those covered in the Risk Factors section of the Form 10-K annual report covering the fiscal year that ended December 31st, 2025, and of the Form 10-Q quarterly report covering the quarter that ended September 30th, 2026, and naturally the filings we make afterward. Anything we talk about today concerning our pipeline or possible orders down the road counts as forward-looking statements rather than guidance. ClearSign takes on no obligation to revise these forward-looking statements for later events or actual results, except where the law demands it, and has no plans to do so. On the line with me today are ClearSign's Chief Executive Officer, Jim Deller, and Brent Hinds, ClearSign's Chief Financial Officer. With that said, I'll hand the call over to Jim Deller. Jim?
Thanks, Matthew. As usual, I want to express appreciation to all of you for being with us on today's call and for the ongoing interest you've shown in ClearSign. Just like on our recent calls, this session will follow a Q&A format. A number of you submitted questions in advance, and those questions were folded into the set we'll be addressing today. For today's call, Matthew is going to lead the question and answer portion, and we'll walk through the various business units in much the same way we did on prior calls. Many of you are already familiar with this, but questions can be sent ahead of time to our investor relations at <<email_hidden>>; we'll begin with Brent Hinds, who will review the company financials for the third quarter of 2026. Brent?
Thanks, Jim. And thanks to all of you for being with us today. I want to mention up front that our financial results on Form 10-Q were filed with the SEC earlier this week. So with that, I'll walk through an overview of our financial results for the third quarter of 2026. In the third quarter of 2026, the company recognized roughly $712,000 in revenues, versus approximately $1 million in the same period of 2025. The decline in revenue year over year came mainly from product mix. Although the product mix in the quarter led to lower reported revenue, it produced a meaningful improvement in gross margins. As we discussed on our Q2 conference call, we entered into a licensing arrangement with an OEM heater manufacturer to build three M-Series midstream burners, and we successfully fulfilled our obligations under that arrangement during the third quarter of 2026. Gross profit margin for the third quarter came in at approximately 55.6%, an increase of almost 20 percentage points over the prior comparable period's margin of 35.8%. This year-over-year gross margin improvement was driven primarily by our licensing arrangement with an OEM heater manufacturer. We believe licensing arrangements of this kind further diversify our go-to-market strategy, and we expect to keep pursuing such arrangements to further expand our revenue channels. We also believe licensing arrangements like this will bolster our overall gross margin and help us reach our overall long-term company gross margin target of 40%. Now let's move on to the full P&L. Our net loss for the third quarter decreased by $361,000 compared with the same period in 2025. That decrease in net loss was driven predominantly by a $601,000 reduction in general and administrative expenses, offset by a $233,000 decrease in other income. Our G&A expenses fell predominantly because of a one-time non-cash expense in the prior period tied to the vesting of restricted stock units issued to our former directors. Other income decreased predominantly because our Department of Energy grant wrapped up in May of 2026. Now let's shift our focus to cash. Net cash used in operations for the third quarter of 2026 was approximately $1.3 million, compared with approximately $1.8 million in the same period of 2025. That improvement was driven predominantly by the timing of customer cash collections. As of September 30th, 2026, we had approximately $10.3 million in cash and cash equivalents. As of September 30th, 2026, we had approximately 6.8 million shares of common stock outstanding. With that, I'd like to turn the call over to Matthew Selinger.
Brent, thanks for walking us through the financials. Jim, I appreciate your being here with me today. To kick off the call, I want to give a short overview of ClearSign, Jim — what we do and how we do it — for anyone who's a new investor. Once that's done, I think we'll get into the product lines and what's been happening at the company; so with that, Jim, could you give a brief high-level summary of what ClearSign does?
Sure, absolutely. At a really high level, right? We possess unique IP, and the company has some leading engineers. In essence, we deliver a technologically advanced solution that lets energy companies meet their clean air emissions obligations efficiently. Our clients are big oil refineries, petrochemical companies, midstream gas companies—generally firms in the energy business, right? During production, they burn fuel gases, right? Natural gas or gas blends, to make the process work, whether that means heating oil up to break it down or whatever. Their combustion process produces toxic gases, and we focus primarily on NOx emissions; those are nitrogen oxides; these gases are heavily regulated. They must operate within the rules to stay within their permits, and local air regulators control them. The traditional technology that gets them down to the latest levels we're seeing in California and Texas is what they call a selective catalytic reduction unit. That's a very expensive piece of equipment that must be built into the back end of their heaters and then supplied with ammonia to operate. With our unique technology, we can provide special burners that essentially don't create the NOx emissions in the first place. We've all had kids—you might compare it to kids and explain to them, hey, it's much better not to make the mess in the first place than to have to go to the expense of cleaning it up afterwards. To put some numbers to that, talking to customers for one of our projects that we have to date, for their project, their estimate to put an SCR in and solve that problem that way was $15 million. Using the ClearSign burners, we believe their total cost comes in around $5 to $10 million. We're looking at a 80% cost savings for that client. If you look at a larger refinery, they've probably got 40 to 50 heaters on that refinery, and that savings will add up to hundreds of millions of dollars for that refining client across the sites; that is a very meaningful opportunity for our customers.
Okay, as I mentioned, I realize people have described our technology before as perhaps a simple yet elegant answer. As you noted once more, essentially what we have is, you could say, improved combustion, an improved flame that avoids generating those emissions right from the start.
Yes.
Great, that seems straightforward enough. So in what way does ClearSign work to bring these solutions to market?
Right. Since I came on board, this has definitely been central to what ClearSign is doing. Our technology is really quite distinctive. We handle our own management, of course, and we're deeply engaged with customers, but supplying burners in this sector comes with certain barriers that would be considered typical for entry. You need to show that your equipment works at full scale. Customers such as oil refiners expect you to build equipment in shops they've accredited themselves. Getting those operations going takes a great deal of cash. We're careful with the money our investors put in, since we understand that's how we exist today. So we built a strategy we refer to as asset-light. Basically we concentrate on the IP, and we've established collaborative relationships with other firms that possess the infrastructure we require, which lets us gain from their infrastructure without it becoming either a capital expense or a continuing expense for ClearSign.
Good. To simplify once more, what you’re really doing is using businesses or infrastructure that already exist so that our advanced technology solutions can reach the market.
Yes.
Okay.
Yep.
Okay, if it's fine with everyone, let's go ahead and shift into what you might call the product lines.
Certainly, yep.
I believe it makes sense to begin with process burners here. We have an increasing count of installations out in the field, though in particular we've discussed for a while a 26-burner order headed to a petrochemical customer's Gulf Coast facility. Once more, this installation was scheduled to kick off at the end of October and to be operational here in this month. I think everyone is waiting, particularly the investors who follow us, to see how this is going?
Oh, everybody's waiting on this, and yet it's going great. Like you mentioned, the burners were due to go in during October, that went completely smoothly, and they're set to start up in November, and I believe we're ahead of schedule on that timeline. It's looking really good. I think we'll be finished in around a week. Really looking forward to having that done.
Okay. All right, and again, regarding this installation, whether it's similar to others or not, how will we be able to sort of claim or, I suppose, signal a win to the market and perhaps within the industry?
As for the event itself, if you will, this one is different. It's a large, sophisticated heater at a global chemical company. With installations of this size, the equipment gets monitored continuously; they use a system called CEMS, Continuous Emissions Monitoring Equipment, which takes constant readings of what's leaving the stack and actually streams that live down to the air boards and, naturally, to the operators and to the site as well. Those analyzers are calibrated and certified by the local air board, and that constitutes the formal measurement; we'll be watching those numbers, just as everyone else will, to make sure they sit below the permit and the guaranteed levels once this project wraps up; that will be the success; and then for anybody looking at ClearSign, we've been focused on completing this project and excited about it for so long that you'll see LinkedIn announcements, and in time, presentations and other materials. The data coming from those emissions monitors will serve as the metric, if you will, the event everyone is watching for to judge the technical success of this installation.
Right, you mentioned that we have invested heavily in the startup. So what does that mean for ClearSign's outlook from here? How exactly will we leverage this, in a sense?
Right, we've been saying from the start that this really matters. We've spent a long time talking with heater companies and, just as importantly, with the lead engineers at the big refiners who have to meet local emissions rules. They get the value our technology brings. They know what we do. A lot of them have come to watch our burners running in the test furnace. The one thing holding them back is somewhere they can actually go to see it in action. It's a bit like test driving a car, or talking to the person operating it, and then they feel confident enough to put this product forward themselves. One of the top engineers at a major refiner said, word for word, "I want to be the first second person to use your burners." This reference is a major installation at a global chemical company right in the heart of our biggest market, down on the Texas Gulf Coast. It's been engineered by the country's premier heater engineering company, Valvaco?. We can't publicly name the customer or the job site, but when we attend conferences like the American Petroleum Institute, people there know about this project. They've been keeping an eye on it. This is a really big deal for ClearSign. We're very excited to have it done.
Okay, so this is clearly a major catalyst. Then investors will be asking, Jim, I suppose, what comes next on the internal side in terms of actionable steps? Do we simply let this sort of trickle out into the market? How will our prospects find out about it?
Absolutely. A lot is going to happen. Last week I visited the American Petroleum Institute and spoke with refinery lead engineers already. They know this project is getting underway. Once we have it running successfully, I'll personally call those contacts, walk them through what we accomplished, encourage them to visit, and arrange for them to see it at the job site. We'll set those up. In addition, I look forward to conference presentations and magazine articles. And I'd ask everyone who follows us on LinkedIn to keep an eye out—we'll be posting details about this there. Clearly, we’ll tackle this on several fronts, though the first step involves those individual phone conversations. A number of important industry figures have told us about every project they’re eager to see.
Yeah.
They’re going to get a call and have a conversation. We’ll be talking with them as soon as we’re able to reach them by phone.
Thanks. That is exactly what investors will be looking for. Let's return to that, and you did mention a proposal pipeline, though I'll revisit it later, I believe. Let's discuss other projects, alright? We have another noteworthy project underway, an order for 32 burners, and it's designated for California. What is the current status of that project?
Yeah, this one's going really well. Looking at the big picture and the phase we're in, we had a detailed engineering and testing phase that's nearly at completion. It's basically done to the point where we're discussing a witness date with the clients. From there, we'll move on to fabricating the burners so we can shift the first half of the burners out to the job site in California. The plan is to get those out, get them up and running, and then roll in and supply the second half. And just to talk a little bit more about this one, if I can, this project has been in the test furnace a bit longer than the standard 2 to 3 weeks.
Yeah.
The explanation is that this represents a fresh setup involving our Gen 2 technology platform. At the time we created that Gen 2 burner, we framed it as a technology platform — one that could be adapted and used across various installations. So this is that burner in the flat flame configuration, correct? It's the initial unit built for that flat flame. This widens our market and brings us into a new segment of refinery heaters, which are frequently the bigger heaters. As we work through this, we're tailoring the flame so it's optimized within that heater. But from where I sit, another reason we're devoting substantial effort here is that I view this as a stepping stone toward entering new markets for ClearSign.
Mhm.
We have discussed before, and I am certain we will discuss once more, high temperature uses, downfired reformers, frequently for making hydrogen, producing ammonia, similar things, and ethylene furnaces as well. Flat flame burners are what the ethylene furnaces use. As it stands, the burner we offer today does not work for ethylene furnaces, yet it represents a meaningful move toward that goal. In my view this positions us well to secure engagement and begin going after that growth in our business.
Let me step back for a moment and perhaps break this down. This is quite clearly—and we've discussed it on other calls—but what's implied here, given this different configuration, right, is that, first, it's a separate application for process burners, which are already moving forward on this project, right, and showing that we're able to use this in another kind of
Yep.
Right, and past that, what this specifically means is that, as you said, it could get us into additional markets. You brought up downfired reformer and ethylene, and as you've noted before, those are huge markets, correct? Could you just give us a bit of color on how big they are, first the heaters market
Based on what I've seen, a burner manufacturer's ethylene business is usually just as large as its refining business, so that alone would double the size of our market. As for the downfired reformers, a single heater in these units can have more than 200 burners.
Massive.
These two are also quite large. What's really advantageous is that, when producing burners in cases where ethylene exists across several furnaces placed next to each other, or with the downfired reformers, you end up constructing hundreds of burners that are identical.
Yeah, right; perhaps this might be seen as a kind of stair-step in that direction. What additional things would ClearSign need in order to enter those markets?
Developing burners is going to take a substantial amount of effort. We refer to these as high temperature applications for good reason. The furnaces involved run extremely hot. There will be considerable research and development required to bring these products to market. And when you enter a program like this, you truly want to do it alongside a customer partner.
Right.
The people who are invested in these projects—you make certain that the right product is being developed, and that it's being developed in line with what this customer requires; then once the project wraps up, when you have it, that means an installation is already set up for putting that burner into service, for demonstrating it, and basically for launching the product line. Quite a few elements go into securing these projects, but as I see it, what we truly want is a customer partner involved in this development.
Yep.
That way we can be sure the product is properly developed. In the end, we want the input, and we want a home for that first installation.
Has the company had any conversations with potential partners?
Sure, that has formed a piece of our long-term strategy — finish the remaining process burners first. Yeah, we've been in active discussions with a range of people and entities regarding this project. Nothing formal has been set up as of now, but we are actively working on that project.
This is exciting. Let me return to process burners, if that's alright; we've also announced an order for 36 burners, and that one was headed to Texas too. We said on the previous call that this one had slipped somewhat. Has its status changed at all?
No, there isn’t. To say it once more for everyone, we do not think — and we have been informed — that ClearSign has any involvement in this. The cause is internal organizational changes at the client, and beyond that, we also have no updates. There is no news I can share at this point. I simply look forward to getting this project back on track.
All right, so just a few weeks back — actually the final day of the third quarter, September 30th — you announced together with Kern Energy that ClearSign had been chosen for the DOE Industrial Technology Validation program, receiving a grant there. Could you shed a bit more light on that?
It’s a solid project. I believe it’s a strong initiative coming from the DOE. This one was a joint effort involving us and Kern Energy, a customer we’ve worked with for a long time. In essence, it’s a DOE-funded project that covers the cost of installing one of our newest Gen 2 process burners in a heater located at the Kern Energy site. This will be a quick-turnaround project. The DOE is going to supply the funding. With that DOE money, Kern will issue a full purchase order to ClearSign, so it’s an order for us. It adds one more reference in the field; yes, it’s a great small project for us.
Great. One thing I do want to point out, though — even though we aren't waiting on this quote validation, right, this would serve as one more validation or data point, correct? This product is already out there.
Oh, there are lots and lots of commercial applications that use this burner technology, and we have shown it to the industry. Hey, additional sites, with the equipment installed and operating, plus the order and the revenue, it's
It would be a great reference site.
a win for ClearSign and a great support of a long-term customer like Kern.
Good. When we consider the process burner product line, how do the prospects appear? We discussed the proposal pipeline previously. How does that look at present?
Oh, these prospects are shifting quickly now that we've finished this project down in Texas. These are genuinely exciting times for us. We've spoken a lot in the past about, right, that one one customer who identified 10 heaters they want us to take a look at. There are other clients we're installing burners into, and they've referenced additional heaters they want us to look at once those are done. There are other refinery heaters coming out of the demonstration and other sales activities that we've quoted to. There are plenty of proposal opportunities and clients currently in discussions with us about that heater. We're very much focused on this Texas startup to give them confidence. This is really exciting. The timing right now is a really big deal, and we're thinking in about a week we'll have that Texas site ready to talk about.
So when you refer to heaters, you clearly brought up once more a single company that has roughly 10 heaters. I believe we talked about this during the prior call — is that an average count of burners, saying 10 burners? I realize they might range from 10 to 30, somewhere around that range?
That's fair. There are some smaller heaters that come with 3 to 5 burners, but if you look at the orders currently in house, there's a 26 we're starting up down in Texas, there's 32, the flat flames, that we're sending out to California. The one down in Texas that's temporarily on hold had 32 burners. Yeah. A heater is typically going to be a, when you look at revenue numbers, $2-plus million
Great.
order for ClearSign.
Now, moving on to the M-Series, if that works for you; this is our midstream offering, and it appears to have developed into a consistent flow of business. During Q3 we booked five orders, and already two in Q4. What's the source of this business?
Geographically, these orders are all coming out of the Permian region, West Texas area.
We have delivered those burners to other geographies, is that right, and are you also seeing interest coming from other places?
Yes, we do. We’ve got burners—yes—in Oklahoma coming up next, and one in New Mexico headed into energy installations. We have quotes in what I refer to as the south area, the Northeast region, and we also have quotes in Canada. We’re seeing interest that is much broader. The recent orders currently in process—five last month and two this month—are all headed down to the Permian. As for whether we’re going to go set up our presentations somewhere, the biggest market at the moment, the growth, is coming out of that Permian area, which has those burners going down there; for reference, being right in that region is also very powerful.
New heaters, too?
Yeah, it's key, and I see it differently than other industries do — the midstream segment is expanding fast. My understanding is that growth exceeded 20% last year. That's gas headed for export, and gas going toward greater utilization. Consider all those data centers we keep hearing about — they require gas to produce electricity. There's enormous demand for gas, and for the midstream industry's growth. Essentially, every one of these recent orders consists of new heaters tied to asset expansion down in the Permian region.
These orders seem to turn a lot quicker, isn't that right?
Yes, definitely far quicker compared with the process burners. When we put this strategy in place, the idea was that these are standard items, built for repeatability and available off the shelf, and we now have enough order frequency, plus our clients use standard heater sizes, so the drawings for these orders and the engineering work are already complete; once an order comes in, our vendors already hold the drawings for these recent sizes, and all that's left is to make additional burners. We're reaching the efficiency we had pictured when we created the strategy for this product line. Because of that, we can now deliver these orders in 3 to 4 months.
I think
from receipt of order.
I believe that's what we observed. As Brent mentioned, we saw orders—we had bookings in Q2, and of course those shipped and were booked in Q3, correct? These are going to move much faster. In theory, we could complete one inside the same quarter. I don't want to sound too aggressive here, but you
Right. So if it came in during the first week of the quarter, we could realistically deliver within that same quarter. As for the two we got this month, once they arrive and the client makes a request, those will go out in Q1 2027.
You brought that up in the previous press release, in the previous order, right, when you were talking about those set efficiencies in the manufacturing process.
Right. At this point, our use of resources is quite small. The work has been completed. Sure, we place the order and handle oversight for expediting and shipping and that sort of thing, but the engineering and design work is finished already.
So now let's get into some figures, Jim. These burners are going for what dollar range?
Yes, this is a broad product line. In dollar terms, starting from our standard sizes, the range goes from roughly $50,000 up to roughly $250,000 for each burner. For some perspective on the orders we're seeing now, most of them are a large size. They aren't the biggest, but they come in around the $180,000 range.
That sounds good. So what kind of run rate do you figure was achievable that we might see in this product line?
I believe the numbers we have support our confidence. In the previous quarter alone we ran five burners, and we already have two installed for the current quarter, which hasn't finished yet. My aim for these products in the Permian Basin, once we have them operational, is simply to become the preferred supplier of 9 ppm midstream burners, correct? Assuming we prove them out, I think that goal is well within reach. I don't see any reason we shouldn't anticipate at minimum sustaining that pace of five each quarter, yes, a rate of 20 annually.
Great. All right, let’s move over to flares, if that’s okay. What’s the newest update, more or less, on the flare product line?
It's pretty much the same situation across every product line we have, correct? We've discussed this before. Things have been coming together this year, right — we've standardized, our products are sorted out, and we're getting the large installations out and running, such as the process burners on the Gulf Coast; we've actually got great M-Series units out there, getting them established in the industry. Flares are no different. Our largest flare system is located in California. It's nearly finished. Startup is planned before the year ends. That's going to be a strong reference for us. We know that client has permits underway that cite ClearSign technology; our belief is they're waiting on this startup before moving ahead with additional flares. Really the same scenario as with the others. This startup will matter a great deal to us. We've also mentioned treating the flare as a burner product
Right.
We're transforming it into a full system worth a million dollars; ClearSign is now starting up this $1.5 million complete flare system project in California. It truly demonstrates that, hey, we're a flare supplier.
So in a similar way, as you mentioned, with the 26-burner order, which sort of shows the whole system, you think that's going to be a catalyst.
Yeah, this is a significant and very believable flare in the industry. Getting this one up and running, and what's uncommon among flares is one that can actually satisfy a measured emissions permit.
Yep.
When it comes to NOx, that's going to stand out in a really unique way in the market. This is a big deal.
Okay, so this product line won’t move as fast as the M-Series, would you say? Is there a target or a sell rate you’d consider desirable over a year for these?
Desirable is a different thing, that's sure.
Sure.
So I think it comes down to what we're actually observing, correct? This is very localized, mostly within California. We've seen a bit of interest elsewhere. Given what we're seeing right now, it seems reasonable to think of 3, possibly 4 per year as a run rate; this one is going to be lumpy. The good part about the midstream is that there's sufficient volume down there and they move quickly enough that I believe we can begin to see a smoother supply.
Yep.
of those in. Flares are going to be on a individual
Sure.
On a basis like that, it might not hold so steady. For long-term run rates, I'd say that's probably a reasonable expectation, given the technology and the markets where they stand today.
If we pull all the product lines together here, Jim, if that's alright, since we're getting close to the end of the year. Are there any milestones we should watch for from now until the end of the year? Or should we skip ahead to 2027?
No, with any luck we should be placing calls regarding that Texas project inside a week. We'll have the flare up and running by the time the year ends. Given how the midstream industry has been doing and how productive it has been for us, my hope is that we land additional midstream orders before this year is over. Yeah. As for the more strategic long-term developments in the making at ClearSign, there are, as I've mentioned, discussions under way as we try to assemble the plan for moving into areas such as high-temperature burners. There are certainly things internally, whether or not we're going to announce them, but I'm definitely aiming to make progress on those projects before year end as well.
Right, there's a lot
We've got lots to do this year. We haven't finished yet.
That's great. Then, thank you for that — how about we turn to 2027? Let's discuss next year. I know you've taken the time to talk about the pipeline, and we've put some of the pieces together here in this conversation. What do you think 2027, 2027 could look like for ClearSign?
I’m really looking forward to next year. Throughout this year, our focus has been on getting those big startup projects and references released, up and running, and completed, and on discussing them. We’ve pulled all of that together, and at this point this year we’re in the last phases of finishing it up. Next year is when we should see the payoff from those efforts; we’ll be actively promoting the Texas installation and will have that strong reference available. My aim is to bring in process burner orders during next year.
Converting those
That reference in place, bringing the people in,
Yeah.
On converting those, let's move forward with those projects. I'm watching for the process burner orders. I want to build on the flare installation, and I'm genuinely enthusiastic about midstream, seeing the burners going out to midstream. A lot of those are set to start up in Q1, with some in Q2. That gives us burners operating down in the Permian Basin across these large installations. As I mentioned, my goal is to be the go-to supplier for those burners. In my view, we have fantastic technology in the M1 burners. Nobody should have any doubt about why they ought to order them from us. I'm very much looking forward to building a steady stream of M-Series burners.
I think it'd be fair to describe 2026 as, for want of a better way to put it, the year we established the product line, and then 2027 would be about converting those products.
So that is the big picture, and that is where things stand. We have genuinely discussed this, correct? Making sure these major installations are centered on advancing the technology, on the Gen 2 burner demonstration early in the year, and on the Gulf Coast startup, which is happening right now. Yes, I believe we are truly eager to get out there and use those references to validate our technology and begin giving our customers confidence to move forward with their promotion.
All right, then let me put this question to you, Jim. How are things going with the ClearSign team? What's the mood like inside the company?
There's a lot of enthusiasm. If you look back at just the last month or 2 months, right, we've had a crew on the Gulf Coast site to walk through the installation, inspecting it, going through startup alongside the operators, collaborating with the client and Valvaco?, the engineering firm. At times that's gone around the clock; we've genuinely had a team down there. Meanwhile, we've been running multiple burner tests at Zeeco. Our engineering group, right, we run a lean team here, we're asset-light, everybody wears many hats, they really dig deep and do what they've got to do. We have Brent and his finance team out promoting midstream burners at a midstream event, showing off their amazing sales skills; we've truly had the whole company doing what has to be done; we're very careful within the company to hold frequent, weekly communications to keep everyone up to speed on all of our projects, what we're doing, where we're going as a company. I believe everyone's really excited right now. They're seeing the success as news comes in from Texas. We're seeing the steady stream of midstream orders coming in. Guys lined up waiting to go and start the flare up out in California. People are excited here. They're working hard, and I really appreciate that.
So did I get that right — you're saying Brent was actually out there on the sales calls too?
Yeah, Brent, the entire sales team. They were all out. I believe the office was basically empty.
I’m curious—Brent, would it be fair to link this month’s improvement in gross margins to that?
Yes, you certainly can.
Great, that's helpful. That covers all the formal questions I had. Operator, we'd like to go ahead and open things up now if you don't mind. We'll take a short pause here, but please go ahead and open the line for the question-and-answer session.
Hey there, good afternoon, everybody. Appreciate you taking my questions. I've just got a few regarding gross margins, and then some on order flow. Gross margins came in stronger this quarter, and I noticed a mention that a licensing arrangement added to that. Could you expand on that a bit more?
Sure, I can. Hey, Sameer, thanks for the question, first of all. On the licensing sales, this has been in our plan for ClearSign right from the beginning as part of a long-term strategy, particularly when we think about scalability and how we grow the business. It's also one of the advantages of product lines such as the midstream burners, in this case, where we've got standard products and we have customers who are able to manufacture their own burners. What's unique to ClearSign is the IP and the designs; in this case, we can supply the fabrication drawings to the client on a licensing basis so they're able to fabricate their own burners. The benefits to the client are that they get to control the schedule, and it obviously saves them money since we're not paying a third party to fabricate the burners. For ClearSign, we earn exactly the same profit whether it's a license sale or whether we're supplying the equipment. Of course, it's truly been a win-win. The burners the client manufactured look fantastic. I actually got to see them myself. We also posted some photographs on LinkedIn if anyone's following us; they've been shipped down to the Permian Basin. That went really well. We believe the client will keep purchasing the burners for their use in that way going forwards, and it's been a very good development for ClearSign, as you saw in the margins.
Thanks for that. So let me put the question this way: is it just this single customer who wants to manufacture it on their own, or are there additional customers also considering this model?
We definitely anticipate repeat orders from this customer. As for what other customers plan to do, I can't say. I'd certainly be willing to do it. Naturally, one requirement is that they must be capable of producing the burners in-house. I'm completely open to that. That said, I have not yet held any other conversations with different customers regarding this kind of order, as I mentioned, not at this time. We do expect additional orders of this type from this one customer.
Got it. Now turning to the M-Series, I believe it was said that you had five orders in 3Q and two orders in 4Q so far. Should we expect more orders in 4Q that you might announce? I think you did cover how 2027 looks for that, but how should we think about the order flow as we head toward the end of the year?
Sure. From our perspective, the year isn't finished yet. There's a great deal of continuing interest in the midstream burners, and what makes this hard to answer with precision is that orders are arriving that we never specifically quoted. Our customers have been given enough detail on our standard burners that fit their standard heaters, and they're now quoting their standard heaters, with our burners included, on opportunities they haven't necessarily told us about; we've actually gotten purchase orders out of the blue that we had to enter into our system with no prior quote on file. With that in mind, and with the conversations we're having and the level of interest we're seeing, right, I can't offer any guarantees, but, yes, I do expect additional orders for M-Series burners before the year ends, simply given how this industry works and the pace at which these orders have been coming in, and just the overall interest in the industry.
Thank you for that. Perhaps just one final question for Brent, and I may have missed this in the commentary, but beyond operating expenses coming in lower year-over-year, they also declined sequentially. Was any explanation provided for the sequential decrease in OpEx?
Yes, if you check the MD&A section of the Q, you will find the information there. The main driver is really the vesting of restricted stock units, which were non-cash, along with legal expenses, and that reduction from 2025 into 2026.
Understood. Many thanks, and best of luck.
Hey, thanks so much, Sameer.
Thanks.
Thanks. Hey, Jim. Appreciate you fielding my questions, and congrats on the quarter. Glad to hear those Gulf Coast burners are operational, and it's encouraging that M1 orders continue to arrive. First off, I want to ask about DOE and Kern Energy. That program seems quite compelling. Can you help us understand how big the opportunity is and approximately when the burners would be installed?
Sure. This project moves quickly and gives us an opportunity to deploy our new Gen 2 technology in the field. We can meet a specific requirement at this job site; it's a single burner heater. This order requires substantial engineering work. The exact figures aren't in front of me, though if I recall correctly it falls somewhere between $500,000 and $750,000. My apologies up front — I could be mistaken on that, but based on what I saw in the contract documents, I think those figures are right.
Great, thanks. Oh, my apologies.
No problem — you wanted to know about timing, so I'll share what I expect. The contractual particulars are done, and the DOE's representative was part of that. We still need to settle the precise schedule together with Kern. As I see it, we should get their order early in Q1. I do think they are still finishing the permit, so that's a caveat to what I just said. Given that, my best guess is the order gets completed somewhere around late Q3 or early Q4 next year. Again, those are my own estimates; we haven't worked out those details yet, and they may change, but that's what I expect for how that project will progress.
Great, thank you. My detailed questions have mostly been answered at this point, and I appreciate that. I've just got a few broader questions for you. Your team has mentioned burners that boost yield and uptime, not merely reduce emissions. Are other customers beginning to view ClearSign as a means of improving plant profitability, and might that unlock additional markets not necessarily driven purely by NOx regulations, or is that not the right way to think about it?
No, Peter, that is precisely the right way to view those opportunities. What's really exciting is that if we can boost a client's yield or uptime, we're no longer merely a cost of emissions compliance. We actually deliver a significant return on their investment. The Texas project, currently on hold unfortunately, was in fact driven primarily by improving uptime at that furnace as one of the main factors. That was one project. It has gone through engineering, we finished the CFD modeling, and at that stage we were able to demonstrate those benefits to the customer. Yes, it's something we are pursuing. It's something we've demonstrated to that client. Going forward, as we show more and more of the industry what we can do, my expectation is that we'll be able to capitalize on that capability to a greater extent.
Thanks. One last thing — your CTO, Matt Martin, said on our podcast a short while back that the M-Series and the flare design went directly from computer modeling into the field. I just want to ask how that alters the cost and speed of getting new products to market, and where does AI sort of fit in with ClearSign?
The first question is the easier one. Being able to design a burner in CFD to the point where we can produce fabrication drawings and send it out to the field, and enjoy the success we've had on the M1 burner, is a game changer. Typically, optimizing a burner in a test furnace through that slow process adds roughly six months to a year, and afterward you must wait for mechanical modifications to be completed and then fire it up; with the computer, you can evaluate various concepts. You're able to observe what is happening within the burner and within the flames. So rather than guessing which modifications are needed, you can truly see what is happening and make precise changes to optimize the process. In case anyone is unaware, the very first M1 burner originated from the output of our computer modeling program. They placed it inside a heater, and that design remains unchanged to this day. That burner has in fact shown NOx levels under 2 ppm, continues operating in the field right now, and serves as the reference standard for the whole M1 product line. I have to give some credit to Matthew Martin, our CTO, and to the team and resources at ClearSign — we've managed to build out computer modeling for combustion systems and burners to what I'd say is a greater degree than anywhere else in the world, in my view, and that's what has let us get technology like this to market as quickly as we have, get it shipped and installed in the field, and achieve the success we've seen with both the flare and the M-Series burner. Regarding your core question, this matters enormously for ClearSign and for how quickly we can deliver not just new technologies but also tailor them to particular client requirements—demonstrating, as part of our sales or project validation process, how those offerings would perform when modeled within their own furnace; that capability is exceptionally powerful.
Excellent. Many thanks, Jim, and well done. I'll rejoin the queue for questions later.
Thanks for those questions, Peter. I'm grateful.
Operator, if that's all right with you, Jim, I'll go ahead and read a couple of them.
Of course.
From email.
Yeah.
I believe you already mentioned this, Jim, but here's my question: it's obvious that big orders could have been delayed while the established players in the energy sector waited until they were completely certain everything would perform the way they expected. Does this startup involving 26 burners stand a good chance of being a pivotal moment that finally lets everything pour through?
That’s our belief, yes. It comes from what clients have told us. More than anything else, they want to see this technology operating in another company’s heater. Right. Put simply, the answer is yes, that’s what we believe, and we’re just excited to be able to get out and discuss it.
Jim, previously you mentioned a break-even figure of 160 burners annually. Do you think that could potentially be reached next year, or does it remain a longer-term goal? What's your view on that?
Yes. That figure comes from a $100,000 piece, a $16 million run rate. Getting the company to break even is what the math shows. We definitely can see the pipeline needed to reach that figure. That means 3 or 4 process burner orders, a couple of flares, plus the run rate from the M-Series. For the company, this is a very pragmatic expectation; the only thing we cannot guarantee is timing. Right, but yes, the window exists. Those opportunities are certainly there.
Alright, Jim, that wraps up all the questions. So with that, I'll turn things back over to you in case you want to make any closing remarks.
Excellent. Thanks so much. Thanks to all of you. I truly appreciate that you joined this call and that you're interested in ClearSign, particularly for giving us your time this afternoon. We're eager to share updates on our developments with you and to speak with you during our Q4 and full year call in April next year. We don't intend to stay silent with news until then. Please keep checking in on the websites. We do encourage you to follow us on LinkedIn. Naturally, whenever we have significant announcements, we'll be issuing press releases in addition to that. Thank you very much.
Thanks, everybody — that brings us to the end of today's event. You're welcome to disconnect now, and we hope you have a wonderful day. Thanks for joining us.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete ClearSign Technologies Corporation transcript - plus 132,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to ClearSign Technologies Corporation earnings transcripts and 132,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.