Ichor Holdings, Ltd. (ICHR) Earnings Call Transcript
November 3, 2025
Earnings Call Speaker Segments
Thanks, Operator. Good afternoon, and I appreciate everyone joining us for the third quarter 2025 conference call. When you go through our earnings press release and when you hear what we say on this call, please keep in mind that each one includes forward-looking statements as defined under the federal securities laws. A number of risks and uncertainties apply to those forward-looking statements, and many of them lie outside our control and could lead to actual results differing materially from what those statements suggest. Among these risks and uncertainties are the ones laid out in our earnings press release, the ones set forth in our annual report on Form 10-K covering fiscal year 2024, and the ones set forth in later filings with the SEC. All forward-looking statements ought to be viewed in light of those and other risks and uncertainties. On top of that, certain non-GAAP financial measures will be presented by us during this conference call. A reconciliation of these non-GAAP financial measures to their most comparable GAAP financial measures is provided in each of our earnings press release and the financial supplement posted to our IR website; here with me on the call today, as usual, are Jeff Andreson and Greg Swyt. Our newly named CEO, Phil Barrows, is also with us for today's call. Jeff is going to start with an update on our business, and after that Greg will give additional details about our results and guidance. Phil will then share his remarks before we open the line for questions. I'll now hand the call over to Jeff Andreson. Jeff?
Thanks, Claire, and hello everyone, welcome to our Q3 earnings call. We appreciate you being with us today; this afternoon, together with our third quarter earnings release, we shared that Phil Barrows, who has served as our CTO for a long time, has been appointed Ichor's CEO effective today; we're delighted that Phil is able to join us on today's call. Phil's tenure at Ichor spans more than 20 years, and he's held executive positions covering engineering, product management, sales, account management, and corporate development and strategy. His contributions have been vital to shaping the company's product strategy, and I'm eager to see the company's success unfold under Phil's leadership. Third quarter revenues came in at $239 million, surpassing the midpoint of what we expected when the quarter began. Just like the upside we saw in Q2, we again saw customers accelerate certain gas panel deliveries into the quarter for dry etch and deposition applications. Without a doubt, the demand environment for etch and deposition remains strong and has gotten stronger year to date, especially to support leading-edge investments in Gate-All-Around and High-Bandwidth Memory. In our view, though, the Q3 upside represented deliveries being pulled forward from the fourth quarter, not an overall increase in second-half demand from our primary customers. Meanwhile, the demand profile for other serve markets kept deteriorating as the third quarter went on. We've been talking about demand erosion hitting multiple applications for several quarters now, with the most significant impact in EUV Lithography and Silicon Carbide, but what caught us most off guard in Q3 was the decline in our non-semi end markets. As we moved into the third quarter, order rates within our IMG business started coming down. As a reminder, commercial space along with aerospace and defense make up the primary non-semi markets IMG serves. IMG's business also delivers a strong contribution margin to our overall financial performance. So when IMG order rates failed to bounce back to their planned levels within the quarter, contrary to what we had anticipated in early August, that produced a one percentage point hit to our Q3 gross margin. Consequently, the progress we continued to make in Q3 ramping capacity of our internally sourced components and hitting our hiring objectives was eclipsed by the gross margin impact of lower IMG revenue volumes. Given our current visibility, we expect IMG to keep running at a lower rate through the rest of the year, which is captured in both our revenue and gross margin guidance for the fourth quarter. Our Q4 forecast now incorporates meaningful forecast revisions from our third and fourth largest customers, reflecting the continued slowing in system build rates for certain applications and end markets. Operationally, we remain focused on improving the cost of our internal component manufacturing capacity so it aligns with our targeted product margins, and on increasing our output to fulfill our customer demand. At the same time, we're seeing consistent technical and operational advancement on our two other proprietary component products, which are intended to broaden the markets we can address for flow control as well as valves. Our first beta unit is slated for customer evaluation in early 2026. Through these next-generation products, we'll be able to cover a wider array of applications and customer requirements, which further boosts our value throughout the semiconductor supply chain. When we look at the customer demand picture, our 18% year-over-year revenue growth for the first three quarters of 2025 clearly shows strong performance compared with overall wafer fab equipment, or WFE, growth. This year's strong growth reflects higher demand from our two biggest customers along with an improving environment for etch and deposition, partly offset by declines in our EUV lithography business, our silicon carbide business, and the shutdown of certain smaller underperforming business units during the year. Given that the currently strong demand environment for etch and deposition is expected to persist, the start of a recovery in these underperforming serve markets for Ichor could very well mean Q4 2025 turns out to be the trough quarter for this next phase of Ichor's growth ahead with Phil Barrows as CEO; with that, I'll hand it over to Greg to recap our Q3 results and give further details around our financial outlook. Greg?
Thank you, Jeff. First off, I want to stress that the P&L figures we're covering today are non-GAAP metrics. They leave out share-based compensation, amortization tied to acquired intangible assets, non-recurring charges, plus discrete tax items and adjustments. In the investor section of our site, you'll find a helpful financial supplement laying out both our GAAP and non-GAAP results, along with balance sheet and cash flow details covering the past several quarters. Revenue for the third quarter came in at $239.3 million, which beat the midpoint of our guidance, rose 13% versus the same period last year, and landed roughly even with Q2. Gross margin during the quarter stood at 12.1%. As Jeff mentioned, we made solid headway increasing production of products we source internally, but weakness in our non-semi business dragged Q3 gross margin down by 100 basis points; operating expenses came in on plan at $23.8 million, giving us operating income of $5.1 million for Q3. Net interest expense and net income tax expense also matched what we had projected, at $1.7 million and $0.7 million, respectively. EPS for the quarter therefore worked out to $0.07 per share. Our Q3 GAAP figures include $18.3 million of restructuring costs tied to the strategic consolidation of our global operations, comprising inventory impairment and fixed asset charges along with personnel transition and facility shutdown costs. We expect there could be further charges during the fourth quarter and fiscal 2026 as we keep carrying out this strategy. Shifting to the balance sheet, cash and equivalents came to $92.5 million when the quarter closed, unchanged from Q2. Cash generated from operations reached $9 million, while capital investments during the quarter totaled $7.1 million. Working capital movements show a steady level of day sales outstanding and an $18 million reduction in inventory. For 2025, our planned CapEx spending is still anticipated to come to roughly 4% of revenue as we wrap up construction of our new factory in Malaysia, which fits our strategy of consolidating global operations and capacity closely alongside our customers. During Q3, we finished refinancing the company's credit facility to bring down our overall borrowing costs; that refinancing affected our GAAP provision for other expenses in the quarter; we cut the fixed portion of the revolver facility from $400 million down to $225 million in favor of an Accordion feature; we also added another five years to the facility's term. The balance on our outstanding term loan stayed the same, sitting at $125 million when the quarter ended, and our net debt coverage ratio came in at 1.5 x, far beneath any covenant threshold we might face. Now let me turn to guidance for the fourth quarter of 2025. With revenue expected between $210 million-$230 million, we're projecting Q4 gross margins in the 10%-12% range. Relative to what we had previously anticipated for gross margin, roughly 50% of that decline comes from reduced IMG revenue, while the remaining 50% stems from diminished sales among our third and fourth biggest semi customers. For Q4, we anticipate operating expenses will stay fairly flat versus Q3, coming in at around $23.7 million. We expect net interest expense of roughly $1.7 million in Q4. In Q4, we anticipate recording a tax expense of about $900,000. That mirrors a full-year non-GAAP tax expense of $5.6 million, identical to what we had guided before. When you refresh your models for 2026, the effective tax rate we assume is presently projected to fall within 15%-17%. Last, our Q4 EPS guidance range, spanning a loss of $0.14 to a profit of $0.02, assumes 34.5 million shares. I'll hand the call over now to Phil Barrows. Phil?
Thanks, Greg. To start, I'd like to express my appreciation to the board for believing in me, and to Jeff for the guidance he's provided. Above all, my gratitude goes out to our employees — without you, none of what we accomplish would be possible. Taking the helm of a company I've called home for almost 22 years and guiding it into its next stage of expansion is truly an honor. Even though the CEO seat is a new one for me, Ichor itself, along with our operations and our client base, is very familiar territory. Let me lay out the strategic priorities that will propel us through this coming period of growth. For Ichor, 2026 is going to be a transitional year. Our intention is to restructure both our worldwide operational footprint and our cost base, which will bolster profitability over the long run, while at the same time capitalizing on the advantages from the strategic investments we've made recently; raising product margins throughout every one of our product verticals is where our attention sits. The purpose behind these efforts is to make our earnings climb more quickly than our revenue does. Having played a central part in shaping our proprietary product approach, my conviction that this is the correct path for Ichor is unwavering. What matters now is executing more smoothly, getting customer qualifications finished, moving our products into volume production, and bringing new offerings to market so that both Ichor and those we serve gain a distinct competitive advantage. We have faith in the long-term fundamentals of the markets we play in, which are propelled by AI, high-performance logic, and advanced packaging. These turning points are transforming the industry and will fuel lasting expansion in our primary WFE markets. Growing alongside the market isn't our aim; surpassing its pace is. Engineering sits at the heart of who we are. The way we generate value is by working with customers from an early stage to address their most pressing challenges. Through these collaborations, we're able to achieve durable growth by crafting products and solutions that only Ichor is positioned to deliver. Last, our machining business generates the largest contribution margin of anything in our product portfolio. Our commitment is to keep growing it throughout both our semiconductor and non-semiconductor markets. Enormous opportunities lie in front of us, and I have total faith in our team's capacity to keep outpacing the markets we operate in. With that said, I'll now turn the call over to Q&A.
Hello there, good afternoon, and thanks for the question — I appreciate the chance to ask a few things. Thank you, Jeff, for all your assistance through the years. And Phil, welcome. I'm looking forward to talking with you further. Perhaps my first question concerns the environment, along with a few of the updates given on this call. Could you put a number on the revenue shortfall from IMG in Q3? By how much are IMG sales anticipated to fall in Q4? What is causing that decline? And what's the outlook for getting back to Q2 revenue levels at some point next year?
Yes, this is Jeff speaking. Hi, Brian. I'd put it this way: as we headed into the quarter, the figure came in roughly a couple of million lower than our forecast — about $2.5 million. The bulk of that shortfall sat in their businesses with higher margins. As we move into Q4, there's going to be another decline at a comparable level, and we believe it will then level off, after which recovery should begin in the first quarter. Possibly around the second quarter, we'll be back at the point where we thought we'd be right about now. That covers IMG. What was that second piece again — I can't recall it.
Right. So that was the part that was sort of what drove the decline?
Right, right, right. That's an interesting point. I believe part of this simply reflects the fact that we've got certain business operating at a run rate down into the supply sub-tier, and that accounted for a share of it. What really made up the largest share were new programs where the money simply didn't flow down to us through the prime. That money isn't lost. The only question is timing — when it shows up. One portion has come in already, so it's essentially been folded in at this point. A few more portions will begin to layer in going forward. The truth is, they won't have any impact on the fourth quarter. They'll begin contributing to growth in the first quarter.
Understood. All right, then that connects to the impasse over the budget we're facing, along with the continuing resolution — meaning spending levels stay frozen and so on.
Right, and I suppose that might settle the matter, though I'm not in a position to say so. What's causing the delay is beyond me. Likely.
Understood. Perhaps for the second question: when it comes to your top four, there’s apparently been additional softness among possibly the two smaller ones of those four customers, and that seems to be persisting, perhaps through the end of this year. What sort of optimism do you hold? Something appeared in the press release that seemed to hint at some optimism that business levels get better in the first half of next year. Could you perhaps give a bit more detail regarding what visibility you have across months and quarters, and what makes you feel the business trajectory could recover in the first half of next year?
Yeah, that's a fair question. I mean, once more, I'd say mostly what shifted as we moved into Q3 was, as you mentioned, the softness at IMG, plus the business levels among our smaller customers, the ones outside the 10% group. On the visibility side, we're already beginning to observe a recovery heading into Q1. Regarding the recent news about removing the 50% ownership threshold, I believe that will have some effect. That said, nothing has shown up yet, and by now it's fairly late in the quarter for that to change anything. I think we can already see the core depth and edge markets beginning to come back up. I'm not prepared to give guidance on quarter one revenue, but we feel quite confident that Q4 marks the trough.
Appreciate it. Thank you, Jeff. Perhaps this is the final one. This one's likely directed at Phil. So if we strip out the impact of that reduced IMG mix during Q3, it appears gross margins could have risen by roughly 60 basis points quarter over quarter, absent that sort of unfavorable mix. My first question is whether that was connected to better operational execution when it comes to ramping internal component supply in Minnesota? And then, thinking more widely, and considering the remarks you offered about this being a transition year, I realize it might be somewhat unfair to put this to you immediately, Phil, but what options does the company have? What steps will the company take? Yeah. So respond in whatever manner you're able, but what options does the company have? What steps will the company take over the coming 6, and then 12 months, to make lasting gains in execution on that internal supply and product yield, establishing a solid base for meaningful gross margin gains once. That's helped, clearly, once Rev can return to that 250 per quarter level too?
Alright, I'll give the response first, and after that I'll pass things to Greg to address that 250 figure. What I'd say is this: when it comes to the new products, we're either where we said we'd be or right on schedule relative to what we projected during the prior quarter regarding the improvements we described then. So we're in very good shape on that front. We've got important efforts underway to keep lifting gross margin on those items. Specifically, we want our valve product line to reach the product margins we're targeting. We're quite near those levels and expect to see that happen early next year. We should keep watching those improve across the next few quarters. Having said that, I'll turn the 250 question over to Greg. That okay with you, Greg?
Yeah. Thanks, Phil. So Brian, I believe the first thing you asked about was the Q3 miss; we discussed IMG, though quarter over quarter the machining business did recover. The thing is, that entire miss was mostly because IMG came up short. As we look toward the quarters ahead, we're following what Phil described regarding the machining business plans. We still anticipate reaching the mid-teens. Once we're in that sort of second half, what we've consistently said over the last couple calls is that at a $250 run rate, we still expect to be in those mid-teens as we carry out our machining strategy to lift volumes and bring those efficiencies to where we think they should be.
That's great. Thanks, Phil. Thanks, Greg.
Thanks, Brian.
Hello. Hello, Jeff. We truly value the collaboration over these past 2 years, and we hope things go great for you in whatever comes next. Phil, glad to have you here. I'm eager to keep talking with you. Perhaps my first inquiry is somewhat more short-term in nature. A bit of the commentary might assist you in shedding some light. You mentioned a Q3 revenue gain stemming from certain pull-ins. You mentioned a Q4 revenue drop. There have been some downward revisions from customers number 3 and number 4. Do those 2 things go together — in other words, did customer number 3 and customer number 4 do a pull-in into Q3, or do they not? Thanks.
Hey, Charles, appreciate it. This is Jeff. No, I'd say for the most part those aren't connected. What I mean is, the pull-in really was counterbalancing a portion of the weakness in IMG, but I'd say for the most part that happened at our biggest customer.
Excellent. Thanks for clearing that up. Jeff, I'd like to hear from you and Phil — I want a bit more detail on what you expect for next year, and not so much about Ichor specifically, but rather the broader WFE direction. From what I gather, your customers have mentioned that the first half of next year might land at roughly the same level as this year's second half. Then the back half of next year might bring a more pronounced turn upward. Do you share that view? And on the nearer quarters specifically, Q1 and Q2 — since your run rate in the second half of 2025 actually dips somewhat based on your Q4 guidance, does that same outlook still hold? Thank you.
Hey, this is Jeff. Here's what I'd say: we continue to expect growth to be weighted toward the latter portion of next year. You'll likely need to assume the year gets going around the midpoint. I think the 50% cut in China could give the first half a little lift as well, but our stance remains that the stronger part comes later in the year. A stronger 2027 — that's basically how we see the next couple of years playing out.
Thank you.
Yeah, I appreciate you fielding my question. I want to add my thanks to Jeff, along with my best wishes, and say welcome to Phil. I'm eager to keep talking with you all moving forward. I wanted to follow up on a few of the earlier questions; it seems that when we look ahead to 2026, we should see gross margin growth of 100 basis points or greater simply from IMG returning to normal levels. From that point to reaching 15% at $250 million in revenues, Greg, how do we assemble those pieces? Which items specifically get us there, whether that's something in weld month, something in gas panel, and so on? Could you help us see how we climb from roughly 12% to 15%? Thank you.
Sure. Thanks, Craig. There are a few factors. The discussion keeps going regarding enhancements to our proprietary products. As Phil said, that will be the main strategy we're pursuing. As the year progresses, that will remain among our largest levers. Phil also mentioned in his remarks the worldwide operations footprint we're streamlining as we go along. We'll get some gains toward the end of the year, though not sequentially. That's more likely a 2027 item. We're focused on generating efficiencies to help push that forward. Beyond the branded product and the utilization of our plants, we're also pursuing additional revenue from our machining business, which clearly earns a better product margin compared with our integration business, and lifting that mix so it represents a bigger share of the overall business.
That helps. For my next question — and perhaps you've already addressed part of this — during Phil's prepared comments, he described calendar 2026 as a transition year. I was simply hoping for more detail regarding which pieces make up that transition, and what you aim to accomplish during 2026 versus pieces of the transition that could begin in 2026 and then deliver greater payoff in 2027 and after. Thanks, guys.
Yeah, like Greg sort of said before, I'd frame it as three main levers. The biggest one is bringing every one of our products up to volume, hitting the cost targets on them. And honestly, spreading those products to more and more customers. I believe we discussed on the prior call that we specifically paused one of the qualifications since, frankly, we weren't prepared for the ramp. We will be ramping that product and that customer through the first half of the year, which boosts our touch points with added customers when it comes to our proprietary products. Next, as Greg noted, especially our global operations and our global footprint. We will be doing work to ensure our products get made in the right place for the right margin. That also helps us from a flexibility standpoint. Put it this way — we want to leverage our machining business in North America to drive our quick turn. That quick turn is going to be our revenue growth for our long term, if that makes sense.
Hello, Robert Merton here, standing in for Krish. I appreciate you giving me the chance to ask a couple of questions. I believe you brought up earlier that there was some friction regarding hiring for the machining business. Could you give us an update on where that business stands right now regarding current capacity, as well as the capacity that would be required to meet demand in an environment that's more normalized?
Yes, last quarter we discussed that we needed to raise hiring levels, especially at our Minnesota factory; those targets have now been achieved. However, as demand for those products grows, what we're going to do is expand our capacity by adding both our Malaysia footprint and our Mexico footprint, manufacturing some of those same products.
Thanks, that's useful. During the prior quarter, you said a third customer had been qualified for your internal valve system, and that discussions were underway with a fourth. Is there anything new you can share right now? Could you tell us where things stand in the qualification process and what adoption rate you anticipate from these customers moving toward internally sourced products?
Yes, that's the point I was hinting at when answering the previous question; specifically, we expect that fourth customer to begin receiving our valve supply during the opening six months of next year.
All right. Appreciate it.
Thank you, sirs. I just want some clarity here — have we fully moved beyond every one of the recruiting and staff-retention difficulties across our U.S. machining operations? It's encouraging to learn that you managed to bring the hiring numbers up. What did it take to reach those goals?
Yes, in the past I believe we discussed various incentive plans that we introduced so that our hiring programs would fall into line. We remain on schedule, and every one of the hiring targets at our Minnesota factory has been satisfied. One thing I'd add is that as these products grow, we'll be replicating the same resource needs in regions with lower costs too.
All right. And I've got one more thing to ask you, Phil. Given that you previously served as CTO, would that background help you in reducing the execution problems we've observed, the ones that had more to do with manufacturing? When you describe 2026 as a year of changes, does that also mean you'll be putting somewhat more emphasis on the R&D side rather than manufacturing or operations? Or am I overinterpreting? Once more, you're moving from the CTO role into the CEO role.
The short answer is yes. What I'd say on that is Jeff has mentioned before some of the growing pains we've experienced. As we shift from being more of a services business toward our products business. Having my perspective as one of the people who built the products business, the way we expand our operations alongside our products is going to be very, very important going forward; that was among the key milestones, the key items we need to accomplish in 2026 — ensuring our product transitions go very, very smoothly from here on.
Sure, just to say something about Phil. He's clearly held a lot of various positions here at the company, but he's been heavily involved in pushing forward. Making sure cost goals line up with what we have to accomplish—that's not something unfamiliar to him at all. This really has been a huge group effort, and he's played a key part in it.
All right, thank you.
Excellent, I appreciate you fielding this. Considering that the fourth quarter marks the lowest point of this year, when we look ahead toward 2026, should we anticipate growth on a year-over-year basis in 2026 compared with 2025?
Yes, I would certainly say that reflects how we see things at present, though we aren't providing guidance for the full year. I believe the coming year is when we expect expansion. As we just mentioned, the first quarter ought to outperform the second quarter. The fourth quarter represents the bottom, and after that conditions could stay fairly level through the first six months. We'll find out how that plays out. Broadly speaking, Christian, as you're aware, momentum tends to build ahead of schedule, yet what we're seeing at this moment lines up with projections from others: our customers indicate that the latter six months will be quite robust.
So with that in mind, and as you get toward that $250 million run rate target in the back half, is the internal plan to be able to reach the mid-teens gross margin goal in the second half of 2026, I mean?
Yes, Christian, that is the plan. That's what the operations is putting together right now.
Alright, that brings me to my final question. Earlier we talked about an aspirational target where vertical integration pushes gross margin up to 20%. Does that continue to be the aspirational objective you folks are thinking about?
Yes, over the long range, that remains what we aspire to. What will truly enable us to move from the mid-teens up to that 20% gross margin is flow control.
That's great. I don't have any further questions. Congratulations on the new position, Phil, and Jeff, all the best. Thanks.
Thanks, Christian.
Thanks.
I appreciate everyone taking part in this quarter's call. I also want to express my gratitude to our team members, supply partners, clients, and shareholders for the continued commitment and backing they've shown throughout my 8 years here at Ichor. Phil and Greg will anticipate our upcoming quarterly update, which comes in early February, for the earnings call covering our fourth quarter. Operator, that brings our call to a close.
That brings today's call to a close. Thanks to each of you for joining in. At this point you're free to hang up, and we wish you a great rest of your day, folks.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Ichor Holdings, Ltd. transcript - plus 131,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Ichor Holdings, Ltd. earnings transcripts and 131,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.