Ichor Holdings, Ltd. (ICHR) Earnings Call Transcript
February 9, 2026
Earnings Call Speaker Segments
Thanks, operator. Good afternoon, and I appreciate everyone joining us for the call covering the fourth quarter and fiscal 2025. As you go through our earnings press release and follow along with this call, please keep in mind that forward-looking statements, as defined under the federal securities laws, appear in both. A number of risks and uncertainties apply to these forward-looking statements, many of which we cannot control, and actual results could end up differing materially from what those statements suggest; among these risks and uncertainties are the ones laid out in our earnings press release, the ones set forth in our annual report on Form 10-K covering fiscal year 2024, and the ones set forth in later filings with the SEC. All forward-looking statements ought to be viewed in light of those risks and uncertainties, along with others. Beyond that, certain non-GAAP financial measures will be presented on this call. A reconciliation of these non-GAAP financial measures to their most comparable GAAP financial measures appears in both our earnings press release and the financial supplement posted to our IR website. Joining me today are Phil Barros, our CEO, and Greg Swyt, our CFO. Phil will start us off with a business update, and after that Greg will share further details on our results and guidance. Once the prepared remarks wrap up, we'll open the line for questions. I'll now hand the call to Phil Barros. Phil?
Thanks, Claire, and hello everyone, welcome to our Q4 earnings call. With 2026 now underway, there's plenty to feel excited about. Ichor has moved into its next phase of growth, carrying more momentum and a clear strategy. Since our last conversation in November, and then again on our January webcast, customer demand across our primary served markets has kept getting stronger. What we can see right now is that we're in a sustained demand ramp — one powered by fundamental technology transitions as well as strategic capacity additions throughout our core markets. Adoption of gate-all-around architectures is climbing, high-bandwidth memory is growing faster, and capital intensity in advanced logic and advanced packaging is on the rise. Those transitions raise etch and deposition intensity, and that's precisely the market segment where Ichor has the most leverage. Our goal is to gain share through this cycle, and responding quickly to what customers need sits at the heart of reaching that goal; making sure supply is adequate and backing our customers' strong ramp has been my #1 focus since I became CEO. So we're adding labor headcount within our integration business and prepositioning inventory, which lets us meet accelerating customer demand through strong, predictable execution. On top of that, recent design wins in commercial space are starting to turn into meaningful revenue. We anticipate those design wins will convert into revenue growth that could outpace our semiconductor growth this year. Given what we can currently see, every quarter in 2026 looks like a growth quarter for Ichor. Now to our results. As we shared in our January release, Q4 landed largely as expected. Revenue came to $224 million, above the midpoint of outlook. We closed fiscal 2025 with $948 million in revenue, up 12% year-over-year. That solid year-over-year growth came mainly from strength in etch and deposition, and it was partially offset by softening build rates of EUV along with decreased demand in certain trailing edge markets. Our commercial space business grew significantly in 2025. It remains a small portion of our overall revenues, but it has grown enough that our fifth largest customer now comes from outside the semiconductor industry. Looking ahead, we expect growth in nearly every application with nearly every customer as 2026 progresses. Our outlook has strengthened further since the year began, and our guidance today calls for first quarter revenues in the range of $240 million to $260 million. At the midpoint, that works out to double-digit growth from our Q4 trough. Based on current visibility, we expect sequential growth every quarter this year, leading to what we expect will be a strong growth year for Ichor. During our January webcast, I laid out our key strategic initiatives for 2026, and now I'll walk through the progress being made. First is our global footprint realignment. During the last several quarters, the money we've put to work has gone toward growing our machining capability in Mexico and constructing our brand-new manufacturing center in Malaysia — the biggest site in Ichor's history. Completion of the Mexico build-out is expected later this year, while Malaysia only started operating last month. These sites are going to serve as our high-volume manufacturing hubs for Ichor branded products, and they'll provide the capacity required to satisfy the demand ramp that we're currently seeing. To make this transition possible, we're currently moving part of our receiving assets into these essential locations, and that will cause a short-term drop in our capacity for those components. Though these transitions matter, they won't limit our ability to serve our customers' demand. Realigning our global footprint affects all 3 of our strategic focus areas for 2026, and the purpose is to reinforce supply resiliency, guarantee business continuity and move us nearer to our customers. This realignment additionally serves as a major driver behind hitting our cost targets for Ichor branded products. On top of that, it will structurally remove the main causes of the margin and ramp difficulties we dealt with in 2025. Starting in Q2, we anticipate gross profit dollars rising at roughly double the pace of revenues as the year progresses. By midyear, we anticipate our global footprint realignment will start producing substantial margin gains; that amounts to considerable earnings leverage in the coming quarters. Before I wrap up, I'd like to discuss our product strategy and the effort to build a differentiated Ichor. For Ichor, 2026 is a milestone year. By the time the year ends, we anticipate having products ready that let us hit our long-stated goal of Ichor branded products able to support as much as 75% of the content in the systems we build. Achieving this capability shows how we keep transitioning from an integration company into a product company and, in the end, a key technology enabler for our industry. Vertical integration at this level supplies the tools and technologies we need to stand behind our customers as they enter the Angstrom era, in which they add and remove material a single molecule at a time. As our customers step into this era, our aim is for Ichor to outperform by providing the technology, products and execution that this degree of precision demands; with that, I'll turn things over to Greg.
Thanks, Phil. Let me begin by emphasizing that the profit and loss data we'll be discussing today is presented on a non-GAAP basis. Excluded from these measures are share-based compensation, amortization tied to acquired intangible assets, nonrecurring charges, and discrete tax items and adjustments. A financial supplement is available on the Investors section of our website that sets out our results under both GAAP and non-GAAP, along with a summary of balance sheet and cash flow information for the past several quarters. For Q4, revenue reached $223.6 million, topping the midpoint of our guidance, despite a slight sequential decrease from Q3. We see Q4 as the bottom of this cycle. We've seen some softness lately in particular end markets and applications, though those areas are already beginning to bounce back. Gross margin for the quarter was 11.7%, which beat the guidance midpoint by 70 basis points — a result of somewhat improved execution despite lower revenue volumes and an unfavorable product mix in the period. Q4 operating expenses were $23.4 million, a bit under what we'd projected, and operating income reached $2.7 million. Net interest expense came in at $1.7 million for the quarter, in line with expectations, and our non-GAAP net income tax expense was $400,000, a touch below forecast. Quarterly earnings hit the high end of what we expected, at $0.01 per share. Let's move on to the balance sheet. We closed the quarter with $98.3 million in cash and equivalents, up $6 million compared with Q3. Better working capital gave us $9 million in positive cash flow, and once we subtract $3 million in capex, free cash flow came to $6 million for the quarter. DSOs improved slightly versus Q3, landing at 29 days, while inventory turns held steady at 3.3. Total debt outstanding finished the year at $123 million, lower than the $129 million we had a year earlier. Net debt coverage is at 1.7 right now. Next, I'll walk through what we expect for Q1 of 2026. To build on what Phil said, our revenue forecast has improved since the start of the year. We're looking at somewhere between $240 million and $260 million. For gross margins, the expectation is a range of 12% to 13%. Q1 operating expenses should come in at roughly $24 million, which reflects the usual seasonal effects from payroll adjustments, audit fees, and other variable compensation costs. As we move into 2026, we anticipate a solid revenue ramp, and that will be backed by a fairly steady OpEx run rate of $24 million — for the entire year, that works out to roughly a 5% increase over fiscal 2025. On net interest expense, Q1 should be around $1.7 million, and we anticipate that figure staying fairly consistent through 2026. When you're building out your models, assume net interest expense of roughly $7 million for 2026. There's also a Q1 tax expense we anticipate booking at about $1.1 million. For your 2026 model updates, the effective tax rate we're working with right now falls somewhere between 20% and 25% on an assumed basis. The reason our non-GAAP effective tax rate is now projected to be higher comes down to two things: the geography of where profits are being generated during this year, plus the fact that our Singapore pioneer status is set to conclude in early 2026. Finally, turning to Q1, the $0.08 to $0.16 EPS range we've given factors in an expected 35.1 million diluted shares outstanding. Operator, that wraps us up — we're ready for questions, so please open the line.
Great. Two questions, if I may. Phil, maybe start with the one about last month's update on first-quarter revenue — your new midpoint sits roughly $10 million above where it was. Could you begin by walking through what's gotten better since that point? And then, thinking about the whole year: if industry WFE forecasts are converging on something like 15% to 20% growth, how should we think about your growth against that yardstick?
Okay. Your first question comes first; regarding what we're observing in Q1 compared with what we saw in week one. Here's how I'd frame it. A fresh forecast reaches us each week. And demand keeps getting stronger week after week. So as the year progresses, our view of the market grows increasingly bullish. On top of that, quite a bit is shifting, in my view. That's the reason we won't provide guidance covering the entire year, though I'd say the 15% to 20% band you mentioned is roughly where our own thinking is converging too. Our positioning, we believe, leaves us well placed to land inside that band — or perhaps even do better.
All right, that's quite useful. Now regarding gross margins, last month you put out slides that helped a lot, showing a path to a possible 15% gross margin at some point in the second half with revenue above $250 million. You're basically already there sooner, correct, given what you said about the cycle getting stronger, when it comes to leveraging those factors that move you from 11% gross margin up to 15%. What exactly is baked into that first Q1 outlook? And how fast do you eliminate some of those remaining pieces, among them, I believe, roughly 160 basis points tied to production levels, which you're already close to achieving? Then there are additional ones from in-sourcing and other things.
Yes. Like I mentioned in the prepared remarks, there are a few items we're working on that I'd describe as near-term or temporary right now. The very first one is relocating certain capacity between sites; specifically, we're shifting operations from one of our machining locations over to a different machining location, all to position ourselves for success over the long run. I'd say that will be completed before we finish the first half of the year. So that will deliver a significant gain once we get past that point. Naturally, that also reduces a portion of our capacity for internal supply. So that's another near-term blow, or a headwind, that we'd experience during the first half of the year. Again, we anticipate that working its way out of the system by the time we finish the first half of the year. I hope that addresses your question.
Understood — so your view remains that 15% for the second half is a reasonable goal, with a fairly even ramp, or perhaps a modest step up in 2Q followed by an acceleration in the second half?
Correct — that's the way I'd put it into a model.
Congrats on the strong results and the great team. Phil, I'd like to begin by revisiting what you said about sequential growth over the course of the year. Some companies have told us the year will remain heavily tilted toward the back half. When you think about sequential growth, could you discuss your expectations for the two halves? And within the growth outlook you have, we were hoping to see a much bigger mix of components and other products with higher margins. Do you think there's a chance that starts to take hold at some point this year? Or will this year lean far more toward gas panels?
Yes, I'd say the first half will be heavily tied to gas panels. Then, as we get into the second half, a great deal of our growth in gross margin will come from more component supply. So that's really one of the key drivers behind that first-half versus second-half margin profile; on the revenue side, I'd still describe it as back-half weighted. However, we're seeing considerable movement into the first half and considerable momentum into the first half. I wouldn't describe that as pull ahead. What I'd describe it as is simply additional demand pulling forward.
That helps. Could you expand a bit more on the Malaysia relocation, considering how strong demand looks right now? What points might you give investors so they feel assured this won't hurt revenue execution, COGS, or expense execution in any negative way?
Sure. Honestly, part of the pressure we faced during the first half stems from getting that site up and running. So regard it as a first-half headwind. That's already reflected in our Q1 guidance. This site sits 2 miles from where we operate now, which I'd call our second biggest plant at present. It isn't very distant from our existing plant, where essentially all weldments for every factory we run get built. So it's a solid plant for us. What we're shifting into Malaysia is extra capacity, correct? Moving through '26 and into '27, we expect a steady ramp to continue. We'll require more machining capacity specifically, plus added capacity in our components business. Much of what goes into that site reflects exactly that; last year, a large share of our CapEx went toward getting that site established. The headwinds, I'd note, are already built into Q1. And we genuinely expect the tailwind from that to arrive in 2027.
Congratulations on those very strong results. Phil, my first question for you concerns the March guidance — genuinely impressive growth, nearly 12% quarter over quarter. Could you break that down by technology? Is the source dep, or etch, or litho, and likewise by end market, whether NAND, DRAM, or foundry? Any detail on the March quarter would help; I also have a follow-up after that.
Sure. Most of it, I'd say, originates in dep and etch. That accounts for the overwhelming share of the improvement we see in this quarter. There's a modest uptick in our non-semi business; EUV, I'd describe as essentially level compared with the prior quarter; however, we anticipate it beginning to rise later in this year, toward the year's end; regarding the technology mix, I'd call it — the quick response, I believe, is affirmative, since at this point everything is expanding. That's — a key reason many observers label this a super cycle is that each segment of our market is growing, and growing meaningfully, and that is genuinely what propels the favorable direction as we move into '26.
Understood. Understood. Then regarding what you mentioned about gross margin, assuming I heard correctly, you basically indicated that gross profit dollars ought to increase at twice the pace of revenue growth. Plus it leans more toward the second half. How much of that is truly the result of revenue leverage rather than in-sourcing when it comes to gross margin growth?
Krish, this is Greg. So the revenue growth — margin growth is actually arriving via a mix, since the overall first half is, as Phil stated, truly the machine deployment that's holding back our first half margin profile somewhat. And so that will begin to ramp once those tools come online during the second half. So you could describe that as incremental volume leverage, bringing those tools online and extracting the leverage from them; and then the second item is our machining and components mix growing stronger as those tools come online, and we're delivering those products. And then last, our non-semi business. is also — as we move through the year, that's getting stronger and that will likewise contribute some flow-through in the second half of — on the non-semi business.
Let me just tack on one additional point there, Greg. I have no problem doing that. Here's what I'd say — during my prepared remarks, I brought up how we're methodically removing certain margin pressures that hit us in the prior year. To put it plainly, what that means is that to hit the cost goals for our products, we need those products running in the new plants. Again, these plants — Mexico's in particular — have already been stood up and are operating at fairly high volumes; we're still completing and finishing the build-out at that location. We have a very high level of confidence about all of it, that it will deliver. So there's minimal risk there — essentially no risk to speak of. I'd note that Malaysia carries somewhat more risk when it comes to qualifications, though that, again, is mostly about getting volume out rather than anything else.
Let's start with the first point. You mentioned that the outlook centers on the business ramping up in a sustained way. Could you describe what demand visibility looks like for you right now — how far ahead does it reach as of today? I remember you saying before that you had a fairly clear picture covering a window of about 6 months. Does it extend beyond that now? Or are you able to see anything at all for 2027 at this stage?
Yeah. Here's how I'd put it: normally, that 6-month window is quite firm — we know where customers are headed and what their demand profile will look like. So you've got it exactly right — 6 months out is very solid. And I'd add that with the visibility we have today, if you consider our Q3 and Q4 outlook — what customers are telling us, what they're placing into their demand windows — at this moment, the second half looks very solid relative to what you'd typically expect when heading into a year. That's the reason we hold a lot of confidence in the second half of the year. And then, of course, you're hearing it straight from our customers; they're discussing what they see in 2027. I'd say our view on 2027 closely matches what they're saying.
My initial inquiry continued from the litho segment. I believe your remarks indicated an expectation of a roughly flat result versus the prior quarter, followed by an improvement afterward in the year. Should we take it that the difficulties, in light of the inventory moves taken by your customer, are now settled? And perhaps certain end market demand trends that had been unfavorable have turned favorable? Or what changes have you observed in that segment?
Yes. Two points from me. The first one is that we've observed that customer, as they had guided, indicating they will begin to see orders improve. Consequently, we anticipate an analogous degree of improvement in orders. What I'd add is that they do carry some inventory that still needs to be worked through. Given what we can currently see, our view is they will work through it around Q3 of this year, which would produce a bit of an increase in Q4. A small amount of uncertainty remains there, so I'd attach some caution to that. Even so, I do think, drawing on their feedback and what they've communicated to us and what they're guiding, that they do anticipate growth in the second half of next — or the second half of this year as we move into next year.
Understood. Turning to demand across the industry more broadly, prices for DRAM and NAND appear to be climbing sharply. Do you see this as primarily the result of capacity moving toward AI applications? Or are there other factors you could point to?
Yeah, I'd say AI applications are certainly what's driving it. Clearly, DRAM and NAND are short on capacity, and that's fueling much of the demand picture we're observing. We're also seeing, of course, foundry logic holding up well this year; so as I mentioned earlier, things are truly strong across the board — each of the major segments of our market is robust and keeps getting stronger.
Congrats on a solid quarter and a good outlook. So my first question — and you've touched on this somewhat — is about what's happening with stock levels at your 2 largest customers; and usually, early in a cycle, I figure you'd expand a little quicker than your customer — your 2 big customers — simply because they begin restocking. And I'm curious whether that's the pattern you expect to play out across '26 and '27.
Yeah. What I'd say is that our revenue guidance, or the numbers we're putting out, is beginning to line up with their statements, and that's a solid sign that stockpiles are declining and will need to be rebuilt, and that's roughly what we're observing when it comes to customer demand and the signals they're sending our way. Keep in mind, most of our business, the gas panels, those systems don't carry much inventory at all. The one case I'd call out as different is that EUV customer, since a nonconfigurable system is identical each time; as a result, they're able to accumulate a stockpile they can keep on hand. What I'd say is we're beginning to align with what our customers are telling us, and to me that's a solid sign the inventory has genuinely worked its way down over the last cycle.
All right. Then, if I'm not mistaken, you said in the remarks you'd prepared, and I believe also in the press release, that you anticipated picking up share in '26 and '27. Could you perhaps help us grasp which segments those share gains will come from?
Sure. I believe I brought this up on my January webcast, but a key emphasis — and this marks somewhat of a shift from whoever held this role previously — is that the real thrust has become generating expansion inside the company. When I say we aim to generate expansion inside the company, that covers every facet of our operations. Yet specifically, the place where I'd like to direct a great deal of our energy when it comes to expanding shares, above all, is our commercial space business — our non-semi business — the machining side of it, which we've been pursuing for some time. Beyond that, I'd also mention all of our componentry, and I additionally want to pick up share in gas panels. So it truly spans everything; and what I'd note is that our customers really hand you share according to platform. I'd like to become somewhat more balanced regarding which platforms we occupy. So there's a bit of work remaining on that front too; but I'd say across everything, it's during a ramp cycle that share truly gets won and lost; and I'm confident we're getting ourselves ready to capture some share in this cycle.
Congratulations. Nearly everything I wanted to ask has already come up. I've got just a single question left. Given that WFE's growth path is once more projected to stay strong in '27, do you believe that, when it comes to components, you could run close to the goals you had before — around 18% to 20% gross margins? Or is a bit more time needed to reach that point?
Right. At this stage I'd rather not put forward a schedule for the 18% to 20%; providing guidance on that feels a bit premature. What I can tell you, though, is that given how 2027 is currently shaping up, I believe we're able to return to certain levels we've seen historically where revenue is concerned; and my expectation is that as components start contributing and similar items come into play, we ought to experience meaningful earnings leverage going forward across 2027. As I mentioned, at this moment, being this far out from next year, I don't want to give guidance on what we expect gross margins to look like then.
Nice work on the quarter. You brought up commercial space as an area for growth. Could you remind us what share of your business that represents? Also, how might the margin stack up against the corporate side?
Right. I'd rather not specify the margins, since that reveals a bit too much. So I'll stay away from that topic, though it does help our overall margin profile. What I can tell you is that today they're a customer under 5%. Over the medium term, our aim is to make them a 10% customer. Clearly, given the semi ramp we're watching, that will lift the bar for reaching it. So the team will find it somewhat tougher to hit that, yet it remains the target. That said, it is our objective, and I'd describe the medium term as far as what we intend to do with that specific customer.
All right, that's helpful. With the growth outlook in mind, how are you approaching capital expenditures? In 2025, CapEx measured as a share of revenue and in absolute dollars rose compared with the prior year. Should we anticipate further increases from where we are now, or a return toward more typical levels? On a connected note, you've carried out restructuring moves — sizable ones — over the past two quarters. Have we now moved beyond any further restructuring accruals?
Ed, this is Greg, and I'll address those. Starting with CapEx, we landed at roughly — just under 4% for this year, in '25, which comes to approximately $36 million. A significant portion of that spending went toward our new Malaysia facility. As we turn to '26, we'll bring it down, heading toward a more sustainable level near 3% of revenue. That said, it calls for additional machining equipment to be installed at the Malaysia site now. We're also redistributing certain machining equipment across North America as we carry out that realignment of the North America machining facilities. So it will come down to roughly 3% in '26, which should give you a sense of what we believe is appropriate to invest there. Turning to restructuring, yes, we recorded roughly $10 million in Q4, and clearly that remained a substantial undertaking across the full year, though most of that work has now been finished. We do anticipate some remaining activity as we close out those facilities being realigned in the U.S., yet it won't reach the scale we experienced across the full year or in Q4.
Absolutely. I appreciate it, operator, and I appreciate all of you being with us on this call today. To wrap up, I want to express how confident we are in the new Ichor and how we expect to generate significant earnings leverage throughout this cycle. I'm eager for our next update on our Q1 call in May. Until then, please get in touch with Claire if you'd like to set up any follow-up meetings. That brings today's call to a close.
That brings us to the end of today's call. At this point, you're free to hang up. We appreciate you taking part.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Ichor Holdings, Ltd. transcript - plus 131,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Ichor Holdings, Ltd. earnings transcripts and 131,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.