Ichor Holdings, Ltd. (ICHR) Earnings Call Transcript
November 2, 2026
Earnings Call Speaker Segments
Thanks, operator. Good afternoon, and I appreciate everyone being on today's call for the third quarter of 2026. As you go through our earnings press release and listen to this call, please keep in mind that both include forward-looking statements as defined under the federal securities laws. A number of risks and uncertainties apply to these forward-looking statements, many of them outside our control, and they could lead actual results to differ materially from what those statements suggest; such risks and uncertainties are among those laid out in our earnings press release, described in our annual report on Form 10-K for fiscal 2025, and described in later filings with the SEC. All forward-looking statements should be viewed in light of those and other risks and uncertainties. In addition, certain non-GAAP financial measures will be provided during this call. A reconciliation of these non-GAAP financial measures to their most comparable GAAP financial measures is provided in each of our earnings press release and the financial supplement posted to our IR website; joining me on the call today are Phil Barros, our CEO; and Greg Swyt, our CFO. Phil will start with an update on our business, and Greg will then give additional details about our results and guidance. Once the prepared remarks are done, we will open the line for questions. I'll now hand the call over to Phil Barros. Phil?
Thanks, Claire. Hello everyone, and welcome to the Q3 earnings call. We're happy to share that this was another quarter of solid growth with improving profitability. The strategic priorities we set out a year ago are still producing results. Revenue for the third quarter came in at $329 million, up 12% from the prior quarter and 37% higher than the same period a year earlier. For the year to date, Q3 revenue volumes are up almost 50% from our Q4 revenue trough — an unprecedented demand ramp over only 3 quarters. Gross margin reached 16%, beating the high end of expectations and rising 190 basis points from Q2, which drove meaningful upside to earnings. Customer demand is still robust, and our visibility reaches well into 2027. As all areas of the semiconductor market are ramping up together, the trouble spots in a supply chain that is very tight have become obvious. A few of these limitations are affecting high-end edge and deposition uses. Such sophisticated applications demand extremely accurate gas delivery, and extremely accurate gas delivery is also Ichor's main product line. For instance, dielectric etch systems with high aspect ratios that are being shipped into gate-all-around architectures and today's most advanced DRAM fabs require pressure-based mass flow controllers in their delivery systems; and most of Ichor's products serve precisely these kinds of high-end applications, which means Ichor's product mix is weighted heavily toward one of the industry's most urgent bottlenecks. I'd like to take a moment to discuss how we modified shipments during Q3 because of the ongoing constraints impacting gas delivery. Basically, our emphasis was on boosting gross profit dollars and creating meaningful earnings leverage despite limits on revenue; we broadened the reach of our component business into additional areas of the systems we support. During Q3 we landed new component wins spanning 6 new tool platforms, all of which sit entirely outside the gas panel. As these programs ramp, such wins widen our opportunities for revenue growth and diversification. Although components carry lower ASPs than complete systems, they provide a stronger earnings contribution per dollar of revenue. This advantage shows up in our results and in how quickly earnings are rising. We're also tackling supply risk head-on through our product strategy, giving priority to the parts that are tightest — specifically valves, fittings, substrates, and before long flow control. We're collaborating closely with both customers and suppliers so we can keep up with demand. Through this unprecedented ramp, every initiative we've launched to lift gross profit and earnings generation is running ahead of plan. Without a doubt, a demand ramp of this size will keep revealing pain points in the supply chain. As an industry, we've gotten through these challenges in the past, and we'll do so again. One thing you can rely on with Ichor is that we'll keep executing strongly on every major profit driver that's within our control. With a 16% gross margin in Q3, we're essentially a quarter ahead of schedule. Our incremental gross margin for Q3 was 33%, comfortably above the 25% to 30% range we typically anticipate, and that was fueled by proprietary content making up a larger share of the gas systems we build for customers. Another lift to gross margin in Q3 came from our push to broaden component deliveries past the gas box, which gave us a favorable product mix benefit. When you look at how Ichor performed in Q3, we'd ask that you pay closest attention to the gross profit we generated, which landed $3 million above the midpoint of our guidance. For our earnings, that carried much more weight than the $1 million in gas panel revenue. Our Q4 outlook indicates that revenues, gross margin and earnings per share will keep growing sequentially; from what is visible to us today, we anticipate revenue growth of about 30% for the full year 2026. The supply chain constraints affecting the high-end etch and deposition segments are completely baked into the 24% growth at the midpoint we expect for the second half, compared with at least 25% growth across the first half that we projected one quarter ago. Importantly, we have grown net income by 100% sequentially in every quarter this year. And in Q4, we once again expect earnings growth to outpace revenue growth. This kind of earnings leverage and operating model improvement is precisely what our strategic initiatives, set forth a year ago, were designed to deliver. Turning to our key strategies for scaling Ichor's capacity for the growth ahead. Last quarter, we discussed plans to scale Ichor's capacity to $3 billion of revenue within our existing manufacturing footprint. To support that level of growth, three priorities guide us: finishing the alignment of our volume manufacturing footprint, growing proprietary content, making strategic investments in machining capacity, and adding the headcount needed to support next year's demand. I'm pleased to report strong progress on all three during Q3. First, our manufacturing footprint: our high-volume sites in Malaysia and Mexico continue to ramp. Machining and welding in Malaysia are now qualified by both of our largest customers. Every planned move to Mexico is now complete. We are already seeing the benefits of this in our product margin. Malaysia keeps ramping up throughout Q4 of 2026, and more capacity will keep coming online in 2027. Moving on to proprietary content: we closed Q3 ahead of schedule with proprietary content exceeding 30% in the gas systems we sell, up from 25% in Q2, and we're still on track to finish Q4 at roughly 35% proprietary content. Each point of in-house content lifts our margins and lessens our dependence on outside suppliers. Sales of proprietary content beyond gas delivery systems are growing strongly. This remains a key focus for design wins as we keep executing our strategy. Now shifting to our plans for converting existing brick-and-mortar into finished manufacturing capacity. This is going to unfold across three stages. Stage one is about converting the shelving in the clean room area. During Q3, we finished building out the clean room capacity that we'd planned, and that backs the demand for 2027 as we laid out in August. To turn additional clean room footprint into capacity serving demand in 2028 and beyond, you need roughly three to four months of lead time. Stage two is about completing equipment orders and getting that equipment installed. Regarding gas system integration, with the clean rooms now in place, installing test fixtures is the biggest task left — those come with a relatively low capital cost and a shorter lead time. And we can place those additional orders as needed. We've increased our welding capacity to nearly double what it was ahead of the ramp that's coming. With the visibility we currently have, this additional weldment capacity will handle both internal and external needs all the way through 2027. We expect capex in 2027 to primarily support our proprietary products along with machining capacity. Those take in flow control, valves, fittings and substrates. The initial batch of new machining tools came in from Malaysia during Q3. Installation is happening right now, and they will ramp over the course of Q4. All the equipment needed to support 2027 has now been ordered and is still on schedule for installation during the next 6 months.
Additionally, we have partnered with capable outside firms so that our proprietary offerings can scale more quickly with reduced capital requirements. Throughout the year, we have been putting those partners through qualification. That extra capacity preserves our flexibility and continues to let us hit the margin goals set for every product. Manufacturing headcount makes up Phase 3. We are bringing people on board and training them in advance of demand. Through Q3 of this year, our manufacturing workforce has expanded 40%, which includes 320 new hires during Q3 by itself, to underpin the production ramp. Over the coming few quarters, we anticipate sustaining these aggressive hiring initiatives. In summary, we are delivering on a sharp revenue ramp. Meanwhile, our gross margins have been climbing each quarter, and we hit 16% — one quarter sooner than we had projected. The changes to our operating model that we set out a year ago are now producing meaningful earnings leverage, and net income has grown by more than 100% in each quarter so far this year. Demand from customers is still strong, and we're putting money to work now to help them grow through 2027 and past it. We anticipate that the structural upgrades to how we operate will keep driving solid earnings leverage as revenue rises. Looking toward 2027, everything we can see today points to a year of strong revenue growth for every OEM and subsystem supplier in WFE. Although supply-chain challenges will keep cropping up occasionally, we anticipate that each quarter of 2027 will bring growth for Ichor; we also expect to keep expanding gross margin as the year progresses, and we anticipate that Ichor's earnings growth in 2027 will exceed revenue growth by more than 2x. In summary, in a WFE environment that gives all suppliers a solid revenue trajectory, what truly distinguishes us is Ichor's earnings growth story; and we look forward to continuing to deliver strong earnings leverage through this historic ramp; and with that, I'll hand the call to Greg, who will go over our financials in more detail.
Thanks, Phil. I want to stress upfront that the P&L figures we're covering today are non-GAAP. They leave out share-based compensation, amortization of acquired intangibles, nonrecurring charges, and discrete tax items and adjustments. On the Investors section of our site, you'll find a helpful financial supplement that lays out both our GAAP and non-GAAP results, plus a summary of balance sheet and cash flow data covering the last several quarters. Third quarter revenue reached $328.7 million, rising 12% from the prior quarter and 37% versus a year ago. That landed within 0.4% of the midpoint of our guidance; as Q3 product mix tilted further toward high-margin component sales, gross margin came in above the top of our guidance range at 16%, an increase of 190 basis points quarter over quarter. Gross margin flow-through topped 30%, a reflection of solid execution and growing proprietary content, along with the more favorable mix. The better gross margin accounted for most of the operating income upside. Q3 operating expenses were under forecast at $24.4 million, with some of the expected spending increases now pushed into Q4. Operating margin rose to 8.6% from 5.5% in Q2. Earnings per share reached $0.63, which was well above the high end of the range we had guided to, based on 38.2 million diluted shares outstanding. Both interest expense and tax expense ended up better than what we had forecast for earnings. Turning now to cash flow: adjusted EBITDA for Q3 totaled $33.9 million, and once interest and taxes were accounted for, cash generated from the P&L came to roughly $30 million — a new four-year quarterly record. Given that demand is climbing sharply at present, we are quickly generating substantial earnings leverage and cash flow from the P&L. That said, we must continue putting money into working capital so we can finance the growth that still lies ahead. Cash used in operations amounted to $29 million, which reflected a $75 million increase in inventory and receivables. Those gains moved in step with the revenue climb, and inventory turns and DSO were both comparable to Q2, at 3.6 turns and 39 days, respectively. Capex came to $10.7 million, which funded clean room space expansion along with our next batch of new machining equipment. Cash and equivalents finished the quarter at $213.5 million. At quarter end, total debt was $119 million, and net debt coverage ratio came in at 0.8. Turning now to fourth quarter guidance: we presently anticipate Q4 revenue between $345 million and $365 million. At the midpoint, that works out to an 8% increase quarter over quarter and 30% revenue growth for the full year 2026; for Q4, we anticipate gross margin climbing to 16.5% sequentially, with a margin of plus or minus 0.5%. We're forecasting Q4 operating expense of $26 million, plus or minus $500,000. The $0.65 to $0.75 EPS guidance we've given assumes $1 million in total interest and other expenses, an effective tax rate estimated at roughly 15%, and 38.5 million diluted shares outstanding. Moving to 2027, I want to share some parameters that offer an early sense of how we're viewing the shape of that year. In 2027, our revenue growth ought to track the growth in systems that our customers see. With the visibility we have today, those plans point to revenue rising sequentially each quarter. Since we anticipate another year of robust revenue growth ahead, we expect to keep delivering gross margin expansion in line with our new, higher incremental gross margin model of at least 25%; at present, we expect operating expenses to rise roughly 15% for the full year 2027 as we put money into R&D and into the people needed to support our growth. Our current expectation is to hold OpEx growth at about 1/2 the rate of revenue growth as volumes rise, and we'll keep updating you on spending plans. The largest jump in OpEx should occur in Q1, driven by additional hiring, yearly adjustments to payroll taxes and benefits, plus other seasonal increases. As we progress through 2027, for modeling purposes we presently assume total interest and other expenses of about $1 million each quarter. Because of where we expect profits to be distributed geographically next year, our current forecast calls for a tax rate a bit under the prior 20% to 25% rate; at this point we project an effective tax rate of roughly 15% in Q4 and 15% to 20% for fiscal 2027. Our stepped-up CapEx in 2026, now estimated at around 4% of revenues, will continue into 2027. We anticipate sizable capital outlays during the first six months of 2027, driven by planned arrivals of equipment. Our machining capacity will continue to expand in Malaysia and Mexico, and we will also complete the last phase of clean room construction at our Singapore site. Although this spending may be weighted toward the initial part of 2027, we still anticipate total expenditures to fall inside our goal of 3% to 4% of revenue for fiscal 2027. Our financial footing is solid — we have ample borrowing room and our net debt coverage ratio currently sits under 1. Adjusted EBITDA for 2026 is projected to top $100 million, about five times what we saw last year, which gives us substantial financing flexibility to fund the working capital and CapEx needed to capture the robust growth in front of us. To wrap up, the third-quarter results show how our operating models drive earnings leverage. Revenue is climbing alongside our customer system shipments. Gross margin is widening more quickly than we had anticipated, and our incremental margins are structurally greater. We think this puts Ichor in position to turn revenue growth into robust earnings growth all the way through 2027. As a final note, please keep in mind that from time to time we need to shift our fiscal year-end so it lines up with the close of the calendar year, and following the approach we've used before, this change will take place in fiscal 2027, a year that will contain 53 weeks rather than the 52 weeks in the present fiscal year. Operator, we're ready to take questions now.
I'll begin with the first question, and then I have a follow-up regarding certain supply and component constraints. The component environment has plainly grown tighter — semi-cap OEMs have confirmed as much. I suppose, when you look at your fourth-quarter revenue outlook, how much more cushion or risk tolerance does the midpoint perhaps offer than in recent quarters? Or, phrased differently, is your visibility to the midpoint of this revenue range stronger from a component supply standpoint than it was in recent quarters? I suppose the second part of that — sorry, part B — is simply this: do you have any impression or indication right now about when that sort of sub-tier component constraint might start to ease up somewhat?
Yeah. I'd mention a couple of things on that, Brian. The first thing is — to begin with, those are both excellent questions. I'd put it this way: sitting here on November 2, I feel extremely, extremely confident that whatever we're guiding today is what we're going to achieve. There's a reason we're guiding that. I'll give you 2 little tidbits to keep in the back of your pocket. To start with the first one, I'd estimate that roughly half of the roughly $10 million in Q4 revenue that came out was attributable to our commercial space business, along with the component constraints we're seeing in the semi space. So I do want to highlight there that there's a bit of a pushout from our commercial space business, mainly because of launch schedules. I wouldn't characterize it as positioned for wins. I'd say we feel really good about the wins that we've gotten. As you can imagine, some of those launch schedules have pushed out, and that's pushed out some of those revenues. Beyond that, let me add that component supplies are, plainly and unmistakably, tight. They will remain tight. Ours is an industry built on innovation. My belief is that we will work this out. We worked it out previously, and we will do so once more. So as of November 2, I feel quite confident that, given what we can see today, we will certainly land at that midpoint.
Understood; and maybe it's too early at this point in the call, but when might you be able to see some decent progress being made against some of those constrained headwinds?
Yes. I'd mention a couple of things. Regarding how linear our revenue was this quarter compared with last quarter, first and foremost, our revenue linearity this quarter is significantly higher than it was last quarter. So I do feel the constraints are starting to loosen. That said, as we've discussed before in the past, Brian, we figure we're going to be part of the solution long term. So I think the more and more of our products that we can bring online, the more and more we can relieve the constraints in the supply chain.
And now perhaps for the actual follow-up here. From a gross margin perspective, clearly stronger this quarter than the high end of guidance. Could you help quantify how much of that came from the benefit of shifting gears and shipping more components into non-gas panel applications? And do you expect that to become a growing tailwind heading into Q4? And is lithography also a tailwind on mix as well?
Yes. A couple of points there, I'd say. Clearly, the more — and the two of us have discussed this previously too — the more we sell in components, the higher the ceiling we have for gross margin. So obviously, one of the areas we focus on, and I believe I brought this up back in January, one area we're clearly focused on is selling components beyond our core gas delivery systems, so across a broader range; so overall, I'd say that's a path forward, and we're driving that; that's a major focus for us from a design win standpoint. And I'd say a lot of that is turning into actual revenue now; so I feel good about that. On litho, I think I may have covered this previously, but I see a small step-up in Q4, a large step-up in Q1. And as we've discussed before, clearly, our litho customer is a solid tailwind from a gross margin standpoint too.
Nice work on the gross margin improvement — let me begin with that. Folks, we saw 30% fall-through on gross margins during the quarter, yet guidance sits at 25%. So could you walk us through what's different? Is it simply that a few more gas panels are returning to the mix? Or was there something atypical in the components mix this quarter that produced that 30% in 3Q?
Right. Here's how I'd put it: at the foundation, this business has consistently run between 20% and 25% flow-through — roughly 20%, 25% flow-through generally. The fact that we're delivering 30% flow-through this year, more or less on average, represents a significant step forward and demonstrates that our strategy has genuinely taken hold; that said, going forward our model is 25% to 30%; so I'd characterize 25% as the bottom of that range, and that's where we anticipate landing. On your point, you've nailed it — we do expect somewhat more gas boxes to come through this quarter compared with last quarter. That will pull that average down to roughly the 25% range.
Right, so turning to capacity and how far we're able to scale up — it sounds like we're feeling good about keeping up with our customers' growth next year. So if they're coming in at 30% to 35%, Phil, what are the things you think the business really needs to manage to grow at that level? And if their demand went up by, say, 10 to 15 percentage points over the year, is there enough flexibility in your supply chain to handle that?
Yes. Good question. So obviously, the first thing we have to manage is the supply chain. We're handling that closely alongside our customers, working in tandem with them. Broadly speaking, as I mentioned in response to Brian's question, I believe this industry attracts creative people, and we'll find a way through. That's always been true of us and it will continue to be; I'm optimistic that this will ease gradually. That said, if we need to adjust capacity by roughly 10% to 15%, the main lever will be staffing. Beyond that, the supply chain comes into play. So I'd frame it as those two levers. I'm quite optimistic about the capacity we're adding — for our own content and for external content on the component side, plus our system business. The clean rooms are now built out. And I'd say being able to flex inside our Malaysia factory during this window has truly allowed us to expand fairly fast and offer customers some flexibility going forward.
Eddie here, speaking for Krish. You mentioned outgrowing WFE next year and growing — earnings rising at 2x that OpEx 15%. So would that mean gross margins hold near 17.5%, which works out to incremental gross margins of 45%? I mean, that appears consistent with your view, but it's a slowdown versus what you just reported in Q3. If my view on 2027 gross margins is true, what could bring us back above 30% incremental gross margin?
Yes. What I'd say is that the way to speed our gross margins back up to that level — to that 30% flow-through — is more and more components, right? And I've discussed this a good number of times. It's entirely about accelerating the components. So we could see 30% flowing through if we have the right component mix. I think we can definitely reach that if that's the case.
Understood. And when you say components, are you referring to things like bringing more mass flow controller production in-house specifically?
Yeah; I look at it in a few different ways. That covers all of our proprietary content. And something I wanted to bring up on this call — perhaps I haven't discussed it much — is that we're getting really nice traction by selling those same components into other areas beyond the gas delivery system. That effectively gives us a new platform for selling those components; and the more of them we sell, the higher that gross margin ceiling climbs.
Understood; and as a quick follow-up about timing, when do you think that will begin appearing in revenues and margins?
Right. We're actually already witnessing it now. And in fact, if you noticed that, it's genuinely what gave us a lift in Q3. So that progress is continuing as we move along. You specifically asked about flow control, so let me cover that too. What I'd tell you is what I've consistently stated, namely a 2027 revenue event. I'd note that I've spent 25 years in this industry doing gas delivery, and the desire for change and the desire for a new entrant such as Ichor in flow control is stronger than I have ever witnessed. So I'd say there's substantial desire on our part to push that over the finish line. And I continue to believe that is a 2027 revenue event.
Greg, perhaps this is a hypothetical question for you. Suppose a gas box being delivered to a customer is missing MFCs — mass flow controllers. Can you still ship it? That's the first thing. And second, can you at least recognize some partial revenue from it? I know this is hypothetical, but I suspect it may be relevant here.
Yes. Hello, Charles, Greg here. I'll handle that question. What I can tell you is that we're collaborating with customers to secure their approval so that we can ship even when a particular component — the MFC in your example — isn't available. We have the customer authorize shipment in that case. Once that authorization comes through, then yes, we're able to ship. And as things stand right now, revenue is not materially affected.
All right. So suppose the customer gave approval for that shipment — once that approval is in place, you can recognize the revenue without…
Right.
All right. Though if there's a bit of a discount involved, that's what I'd figure, or maybe not.
My apologies.
So can you recognize the entire amount or not?
Yeah. Mostly, we do recognize the whole revenue; that depends on what the customer arrangement says regarding their authorization, the short ship, and whether they cover the complete value or we retain part of it; but in most cases, it's at the full value.
Understood. Understood. I realize we get one question and one follow-up, but could I ask one more?
Of course.
Yeah. All right. Fine. So the internal — the component — actually, perhaps it's too soon to label it internal content. Those components, I believe there are two distinct ways to monetize them, correct? Either it gets placed into the gas panel, which contributes nothing on revenue but does boost your profits, or it sits outside the gas box, and that adds to revenue as well as profits. So could you put numbers on that for us — what occurred in Q3 and perhaps what you anticipate in Q4 — how much of that component upside really comes from being inside the gas box versus outside it in Q3 and Q4?
Okay. I'll do my best to give you a clear answer here. And if anything's still unclear, don't hesitate to come back with another question. What I'd note is that we discussed our in-house content. That in-house share moved from roughly 25% up to 30% during the prior quarter. By the time we close out Q4, it should land near 35%. As for the pieces we sell externally, that's a segment expanding at a fast clip. To give you a sense of the scale, consider that between Q1 and Q4 it increased 250% — so that business has expanded 250% now from a small base, yet substantially; and I anticipate continued growth from Q3 to Q4 and from Q4 to Q1. That has served as a revenue driver for us throughout this year.
I'd like to add something to what Charles asked. What's the customer benefit of receiving the gas panel without the MSC? I mean, would they actually want something like an unfinished subsystem?
For certain customers — if you consider some of them, they need to test the tool before it moves as a complete unit. So for those customers, the advantage is getting the subsystem test so they can verify the equipment's overall functionality and confirm they're satisfying their customer requirements; that's really where the benefit lies. What I'd say is that up to now, whether that's something they're willing to take or want to take has been pretty hit or miss. So it's kind of handled on a case-by-case basis. What I'd say is that, generally speaking, that isn't our plan. Our plan is to ship full boxes, and that's what we plan for. That's what we contemplated in our guidance, and that's what we contemplated in our build plan.
Understood. Then as a second question, with demand still running high, what's your view on longer-term contracts? Are buyers becoming more inclined to sign binding commitments covering inventory and capacity?
Yeah. What I'd tell you is that, by and large, our customers are backstopping inventory positions. That practice is, I'd say, more recent. There's always been some backstopping, but the volume of it they're doing now is far lighter and far broader than was the case before. So having said that, I'd characterize what they're generally doing as making sure that we — when we purchase inventory and issue POs, we aren't stretching ourselves too thin. And they want certainty that this is inventory which will definitely move. So essentially, under the agreements in place with our customers, if it doesn't move over a stretch of time, that inventory becomes theirs.
Ben here, sitting in for Christian Schwab. There was quite a bit of internal content commentary before I joined. Could you give us a bit of detail on your targets for '27? Do you see that figure continuing to climb beyond 35%?
Yeah. In the near term, I'd frame our short-term target as reaching 40% internal content. Going much past that 40% is going to require Flow Control. As I mentioned earlier, Flow Control is a 2027 revenue event. Getting above that 40% of internal content is what Flow Control will be needed for. My overall aim for the company is to bring us to roughly 50 to 50 over the long term, but that's a long-term objective; it isn't a near-term perspective, so to speak. So the long term is getting to 50 to 50 across components and systems; that takes us well above our forecast.
Then one final thing from me, and it's quick, about that $3 billion of capacity. Would that come with 25% margins at $3 billion? Or might we reach 25% nearer to $2 billion? And after that, how should we think about the timeline for that capacity to come online?
Ben, I don't believe we've yet stated that we have a 25% gross margin target. The target is a 20% gross margin, with that 25% to 30% incremental flow-through, correct? So at $2 billion to $3 billion, our target remains 20%. We may revisit it, but it remains 20%.
This is Na calling from Freedom Broker. Congrats on that strong margin performance. Phil, you noted that supply chain constraints are hitting high-end etch and deposition applications, including limits on revenue even though customer demand is strong. So can you help us grasp how big these constraints are right now, and which components are the biggest bottlenecks?
I'd say there are always about 4 components that keep me up at night, or 4 suppliers that keep me up at night on any given day, and those 4 shift every single day, right? So we have to invest a lot of time with our suppliers, ensuring they've got the capacities we need and ensuring they've got the parts when we need them where we need them. And that's what we do as a company. That's what we've done for over 25 years, and we're going to keep doing that. So I'd say I feel good that while things pop up from time to time, we figure out ways to fix those. With that said, I'd say supply chain constraints are fully contemplated within our guidance ranges. So that, to me, is where we think the constraints are and where they sit today. So what I'd say is, in general, the supply chain is starting to ramp up and get caught up to where we need it to be, and I feel a lot more comfortable today than I would have even just a quarter ago.
Yes. And as a follow-up, I'd like to ask: as you grow in-house production of valves, fittings, substrates, and in time flow control components, might those investments open up extra revenue opportunities? Or are they mainly meant to lower supply chain risk and safeguard current shipments?
Yes. I think the brief response to that is yes. What I'd say is that our original thinking on the strategy, or our take on it, was really to boost our internal margins and gross margins — by becoming vertical in the systems we make. As this process has matured and we've reached roughly where we are today, we see a substantial opportunity to sell those same components outside the gas delivery systems we build. So we see plenty of opportunities to grow revenue — not only gross margin and not only vertical content — by going directly after these components in other areas of the tool. And in fact, that's precisely what happened in Q3. We saw some areas where we could win qualification positions, and we did that. And those same proprietary components we discussed, which go into our gas systems, can also be used in other areas of the tool.
Thanks, operator, and thanks to all of you for being with us on today's call. Twelve months ago, we set out the plan for making Ichor structurally stronger. During Q3, we hit our gross margin goal for the fourth quarter an entire quarter early. I'd like to thank our employees for making that happen while handling a particularly steep ramp. My confidence in this team is complete, and I'm proud of what we're achieving together. We'll continue executing on the things within our control, backing our customers' growth, growing gross margin, and turning revenue growth into strong earnings leverage; we look forward to updating you on our Q4 call in February. Until then, please contact Claire to arrange any follow-up meetings. Operator, you may conclude the call.
That brings us to the end of the call for today. At this point you're free to drop off the line. We appreciate everyone for joining us.
Read the full transcript via the API
You're viewing the first half of this call. Get the complete Ichor Holdings, Ltd. transcript - plus 131,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.
Get an API key View API docs →For developers and AI pipelines
Programmatic access to Ichor Holdings, Ltd. earnings transcripts and 131,000+ others is available through the
EarningsAPI REST API and the hosted MCP server.
Quarterly plans from $162 - full transcripts, speaker segments, full-text search,
and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.