Home / Transcripts / Ichor Holdings, Ltd. (ICHR) · August 3, 2026

Ichor Holdings, Ltd. (ICHR) Earnings Call Transcript

August 3, 2026

NASDAQ US Information Technology Semiconductors and Semiconductor Equipment earnings 36 min

Earnings Call Speaker Segments

Claire McAdams executive
#1

Thanks, operator. Hello everyone, and I appreciate you being on the line for our Q2 2026 earnings call this afternoon. While you go through our earnings press release and follow along with what we say on this call, I'd ask you to keep in mind that forward-looking statements, as defined under the federal securities laws, appear in both. A variety of risks and uncertainties apply to these forward-looking statements, and many of them lie outside our ability to control, meaning actual results could end up differing materially from what those statements suggest. Among these risks and uncertainties are the ones laid out in our earnings press release, the ones covered in our annual report on Form 10-K covering fiscal year 2025, and the ones covered in later filings we've made with the SEC. Keep in mind that any statements about the future need to be weighed against those risks and uncertainties, as well as others. Also, during this call we'll be sharing some non-GAAP financial measures. You can find reconciliations of those non-GAAP figures to the closest comparable GAAP figures in our earnings press release and in the financial supplement, both of which are available on our IR website. Joining me today are our CEO, Phil Barros, and our CFO, Greg Swyt. Phil is going to kick things off with a business update, and after that Greg will walk through more specifics on our results and guidance. Once the prepared remarks are done, we'll open up the line for your questions. At this point I'll hand the call over to Phil Barros. Phil?

Philip Barros executive
#2

Thank you, Claire, and good morning to all of you joining our second-quarter earnings call. Three quarters back, we presented the plan for making Ichor's operating model stronger, growing margins, and setting up the company to beat the market in the coming semiconductor upcycle. What we reported today shows we are executing on that strategy. Sales came in at $295 million, which was a 15% rise from the prior quarter, and since gross margins climbed 130 basis points, our EPS came in at more than twice the Q1 figure. The extra top-line growth we had told you to expect in Q2 instead landed 1 week afterward because of a few part shortages, which we have now fixed. And at this point we are generating much greater growth in the back half than we anticipated a quarter ago. At 14.1%, gross margin came in above the top end of our guidance, helped by a better product mix as component revenues keep expanding in non-semi business, plus better product margins from carrying out our strategic footprint realignment amid this historic ramp. That gross margin beat turned into $0.34 of earnings, at the top of our guidance range and our best quarterly earnings in 3 years, which shows the strategic moves we are making are producing real financial results. We also finished the whole ATM equity offering within the quarter, which gives us considerable flexibility to pursue strategic investments that will improve our results down the road, and that leads me to the underlying demand picture, which has kept getting better since our previous earnings call. Ichor's revenue growth for 2026 is now projected to be even bigger than what we told you just 3 months ago. We have now posted 15% sequential revenue growth in both of the first 2 quarters this year. Looking forward, the accelerating ramp in customer demand gives us improving visibility, pointing to sequential revenue growth above 10% in each of the coming 2 quarters. Our latest demand forecast, together with how we see supply chain readiness, collectively backs our expectation for second half revenue volumes at least 25% above the first half. Our confidence in the size and the length of this growth cycle is greater today than at any other time this year. The technology transitions fueling demand have not changed. Spending on advanced etch and deposition applications that support AI infrastructure, gate-all-around architectures, advanced memory and leading-edge process technologies keeps favoring Ichor's portfolio of highly < >. We think Ichor is positioned well to take advantage of these technology transitions. Looking ahead to 2026 in particular, we expect our top line to expand at a pace matching the upper end of WFE projections, translating to an increase of no less than 30% compared with the full year 2025. Turning now to what we're doing on the strategic front. On our prior quarterly call, we discussed the realignment of our worldwide footprint and the actions underway to make structural improvements to the business. As of today, we can demonstrate that those actions are delivering financial results you can measure. Over the past 2 quarters, our gross margin has climbed past 14%, exceeding the target of 100 basis points of improvement each quarter that we had established, and at the same time we lifted earnings to their best level in 3 years. That is exactly the sort of operating leverage our business model can generate when we execute on our strategy. Beyond that, because the changes we made to our footprint and the upgrades to how we operate are permanent in nature, we continue to deliver another 100 basis points of improvement in gross margin across each of the 2 quarters still left in the year, despite the fact that Q2 landed above the top end of what had been expected. In our machining and component operations, we are seeing substantial operational improvements, as product margin has climbed considerably relative to the first quarter. It is operational efficiencies combined with successful product transitions that are driving these improvements, rather than just the greater factory utilization that accompanies these larger revenue volumes. We also saw a shift in product mix toward a more favorable profile, supported by strength in our proprietary products, higher-value manufacturing service and commercial space businesses. The way we see it, these improvements are exactly the outcome our operating model is designed to deliver: a larger share of proprietary content, additional production kept in-house, better efficiency in how we run things, and increased leverage on earnings as revenue continues to climb. We remain on track with the transitions in our manufacturing, and the proportion of proprietary Ichor content inside the systems we build continues to rise. In Q2, we obtained further important qualifications, including one for our high-volume manufacturing location in Malaysia. For our product strategy, that represents yet another significant milestone. Every qualification we secure expands what we can produce internally, strengthens our competitive edge, and lifts our long-term returns. Our plans to qualify more critical parts in Malaysia are still moving forward as expected. That gives us more room to fine-tune the supply chain and push internal supply higher. The whole point of this approach is to let us execute even better for customers, and it's a central piece of what we're doing to grow gross margin. The big thing here is that we've hit a turning point. Growth isn't being held back by demand. It isn't being held back by manufacturing capacity either. And as our high-volume manufacturing site keeps succeeding, being less dependent on outside suppliers will turn into an edge for Ichor. During the last twelve months, we put substantial money into our workforce, stock, production capabilities, and worldwide operations so we'd be ready for this big surge in demand. That spending is starting to pay off now. As things stand, we can handle $500 million in quarterly revenue; by making focused investments, we think we can grow capacity inside our current operations to as much as $3 billion on an annual basis, which is over twice what we're running at today. Most of the extra money we need to spend will go toward boosting output of our proprietary high-value components, which removes bottlenecks among our suppliers; those very same investments will let us hit the product mix and gross margin targets we've set. Looking forward, we know exactly what we need to focus on. Deliver for the people we serve, finish the shift in our production footprint, keep increasing how much proprietary Ichor content we ramp, grow margins, and turn this remarkable demand backdrop into ongoing profit expansion. What we've invested across the last several years puts Ichor in a different position than at any other moment in our history. We're turning into a company that is structurally stronger, with a manufacturing network that's more efficient, a higher share of proprietary content, better earnings leverage, and the operational capability to stand behind our customers through what probably will be the biggest growth cycle this industry has ever seen. My confidence has never been greater in our strategy, in how we execute, or in what lies ahead; having said that, I'll hand the call over to Greg now so he can walk through the financial results in greater detail.

Greg Swyt executive
#3

Thank you, Phil. I want to highlight before we dive in that the P&L figures we're covering today are non-GAAP. Share-based compensation, amortization tied to acquired intangibles, nonrecurring charges, and discrete tax items and adjustments are all excluded from these metrics. On the Investors portion of our site, you'll find a helpful financial supplement laying out our GAAP and non-GAAP results, along with balance sheet and cash flow data covering the past several quarters. Revenue for the second quarter came to $294.8 million, which was up 15% from the prior quarter. Some isolated supply chain constraints emerged late in the quarter, preventing us from booking our entire revenue forecast before the June 26 quarter close. Rather than that, we exceeded $300 million in revenue across the 13 weeks that ended July 3. We've resolved those part shortages as we push toward yet another quarter of substantial growth in Q3. Gross margin climbed to 14.1%, a sequential gain of 130 basis points and 60 basis points higher than the guidance midpoint, powered by ongoing progress on our machining strategy and a better product mix. The bulk of our profitability upside came from that stronger gross margin, with Q2 operating expenses landing at $25.3 million, while operating margin rose above 5.5%, showing considerable operating leverage as volumes scale up. Interest and tax expenses came in slightly better than we had forecast, producing EPS of $0.34 for the quarter, calculated on an average of 36.3 million diluted shares outstanding. Cash flow generation from the P&L was positive and grew substantially this quarter, with EBITDA rising more than 50% from the prior quarter to surpass $21 million. Since we're gearing up for further growth ahead, we're steadily adding to inventory, so cash from operations ended up as a use of $15.9 million. Capital expenditures for the quarter came to $7.8 million. Because the improved 2026 outlook should carry over into 2027, we're speeding up investments in our factory clean rooms and machining capacity. Consequently, we anticipate CapEx will trend upward during the second half, though it should stay inside our target range of roughly 3% of revenue, which takes us to the balance sheet. Cash and equivalents finished the quarter at $256 million, up $167 million versus Q1. In Q2, we finished the full $200 million ATM equity offering, issuing 2,480,000 shares at an average price of $80.70 apiece and bringing in net proceeds of about $195 million. That deal boosted our available liquidity considerably, giving us more flexibility to back growth initiatives, working capital needs, and strategic opportunities. DSOs and inventory turns were both comparable to Q1, at 32 days and 3.7x, respectively. Total debt stood at $120.6 million when the quarter closed, and our net debt coverage ratio is 1.1. Now on to guidance. As Phil noted, we now foresee a sharper revenue ramp for Q3 and the back half of 2026 than what we expected a year ago. Looking ahead to Q3, we expect revenue to land somewhere between $315 million and $345 million. At the midpoint, that works out to 12% growth sequentially and a 38% rise in revenue volumes compared with the same quarter last year. For Q3 gross margin, our guidance spans 14.5% to 15.5%, and we'll keep pushing margin improvements of 100 basis points each quarter through what's left of 2026. On total operating expenses for this year, guidance has stayed fairly steady so far in 2026, even as demand ramps more steeply. We're maintaining tight cost discipline throughout the company to back higher revenue volumes, and right now we expect total OpEx in 2026 to rise roughly 6% versus 2025, with almost the entire bump sitting in the R&D line. That outlook assumes a fairly steady run rate of $25.5 million in OpEx for Q3 and Q4 alike. Turning to EPS, our range of $0.40 to $0.50 for the third quarter assumes total interest and other expenses of $1.5 million, an assumed effective tax rate between 20% and 25%, and 38.5 million diluted shares outstanding. To wrap up, our second quarter results show clear progress on the financial priorities we set out earlier this year: stronger profitability, continued execution of our internal product strategy, disciplined cost management, and improved operating leverage as volumes accelerate. With demand strengthening, margins expanding, and our balance sheet giving us greater flexibility, we're heading into the second half with momentum and a stronger earnings outlook than anything we've delivered since 2022; we believe that accelerating demand, improving margins, disciplined investment, and enhanced liquidity together put us in position to support our customers through the ramp while continuing to turn higher revenue into stronger performance. Operator, we're ready for questions now. Please open the line.

Kinney Chin analyst
#4

Steven here, dialing in for Krish. Phil, I suppose the opening question goes to you regarding what was said about growth for the entire year. You brought up the possibility of 30% or more for this year compared with last year. I suppose, when we consider certain WFE figures that a number of your clients have discussed, plus the full-year growth rates that one of your major customers has mentioned, could you assist us in closing part of the distance between what customers are saying and what you currently observe? And once more, I completely recognize that the mood and the demand indicators are extremely robust. Still, when you look at it just by quantity, anything you could provide that helps tie the numbers together — whether that's supply itself or simply when your added capacity will come online — would be helpful.

Philip Barros executive
#5

Yes. Great question. What I'd tell you is that at present, the direction we're moving in reflects a blend across all of the customers we serve. When you consider the guidance each of our customers is providing, since we ship to all of them in differing proportions, I'd describe our position as a solid mix of their various outlooks. Broadly speaking, we appear to be moving toward the upper portion of WFE. That's essentially what we intended when we referenced 30% plus. At this stage in the cycle, that's where WFE seems to be converging. I'd add that we'll keep watching it closely, and I'd say we're still expanding alongside our customers and reflect a healthy combination of their perspectives.

Kinney Chin analyst
#6

All right, that makes sense. Then as a second question, I wanted to ask about the lithography client of yours. In earlier quarters, I believe you noted that inventory levels could play a role in how much growth is possible with that customer during this year. I'm just curious whether the inventory picture at that customer has shifted at all over the past quarter.

Philip Barros executive
#7

Yes, I would say the inventory situation has stayed quite steady; our view is that we are working down that inventory during this quarter. So as we finish this quarter and Q3, I'd say we will be past it. In Q4, we begin to see a recovery, especially in Q1; so our visibility with that customer is really strong; they provide us a long-range forecast, which gives us solid visibility into what they require. I would say we expect substantial growth in 2027 with that customer.

Edward Yang analyst
#8

Can you give us a bit more color on the portion of second quarter revenue that got delayed because of the component shortage? Was that tied to flow controllers, by any chance? And because of that, did you fail to meet any delivery schedules with customers? Just looking for some additional context there.

Philip Barros executive
#9

Yes. Those are all fair questions. First off, you have a great instinct, because I'd tell you that when I think about the vendors that cause me sleepless nights, flow control would certainly be among them. In terms of how we're performing for our customers, here's how I'd frame it: I believe our execution for them is quite strong. I believe we're maintaining excellent momentum with them. I believe we aren't holding back their production. So I'd say our pace is very solid; as a result, everything we produce goes into the system and gets shipped. What I'd add is that with that specific vendor, what took place at the close of the quarter was, I'd characterize it as an isolated event. Specifically, we expedite components every quarter. That isn't a shock. That isn't something we skip as part of our routine operations; and honestly, this usually occurs somewhat earlier in the quarter, so to speak. Sadly, it occurred right at the quarter's end, which meant it spanned across quarter boundaries. I'd note that when that revenue shipped, it went out literally days after the quarter, but simply too late for us to recognize revenue.

Edward Yang analyst
#10

Understood. And for my next question, perhaps this one is directed at Greg. A consequence of the massive revenue growth you're experiencing is that inventory is accumulating, your operating cash flow has gone negative, and you're burning cash on that operating cash flow side. At what point do you expect that to begin turning back positive?

Greg Swyt executive
#11

In the near term, as we mentioned, we still have certain investments to make in inventory so that we can be sure we're satisfying customer demand. We anticipate that we will begin to see the advantage of improving inventory turns during the first half of '27 as we move through this demand cycle.

Christian Schwab analyst
#12

I just want to get some clarity on something I believe I heard during the prepared remarks. My recollection is that last quarter you laid out annual production capability of as much as $2 billion in revenue, and that figure was somewhat above what had been shown 2 or 3 quarters earlier. Did I understand you right that in your view you can produce as much as $3 billion in yearly revenue?

Philip Barros executive
#13

Christian, great question. Here's what I'd say: over the last quarter, we completed our long-range planning. In a ramp environment like this one, as you can picture, a great deal of time goes into planning and into making certain you're prepared for the demand that's coming. During that exercise, we asked ourselves: all right, what would it take to reach $3 billion? What would it take to go above and beyond that? Here's what I'd say: with the footprint we have today, $2 billion is not a problem at all. Reaching $3 billion — we already have the brick-and-mortar, which clearly carries the longest lead time of any item. I'd say we'd need to add some clean room space, not a great deal, but some clean room space, and in fact we're carrying that out in the second half of this year, which will leave us well positioned. Beyond that, I'd say, we'll put investment into machining capacity, because as the ramp goes on, additional machining capacity will be needed to serve our internal component requirements as revenues keep growing. So by and large, here's what I'd say: inside our 4 walls, $3 billion in revenue is achievable. We just need to make a modest investment to bridge the gap between now and then.

Christian Schwab analyst
#14

That spending, from what I gather, is happening during the back half of this year. Usually, getting a clean room space operational might require 6, 9 months; so can we safely assume that somewhere in calendar 2027, that's where things are heading. Was that stated accurately?

Philip Barros executive
#15

Yes, at this moment I won't provide guidance of $3 billion. Should we draw nearer to that figure, perhaps I will. What I can tell you, though, is that we are preparing ourselves for a meaningful 2027.

Brian Chin analyst
#16

Let's begin with supply, if we could. Could you provide a bit more detail on how the Malaysia manufacturing ramp is being carried out? And possibly connected to that, or perhaps going further, are direct OEM customers now giving you mandates to speed up the in-sourcing and design of particular passive components — maybe active ones too — because of part shortages that already exist or could be at risk of appearing somewhere in the supply chain?

Philip Barros executive
#17

Yes, Brian, those are excellent questions, I'd say. A few things come to mind. Above all, things are going extremely well with our Malaysia ramp. On that point, there were a couple of areas where the Malaysia ramp-up had me concerned. Those would be machining along with our welding, and both have now been qualified by both of our major customers. So within the quarter, that's a significant win. So really good progress there. As we've mentioned previously, Malaysia remains a headwind until that factory is fully absorbed. That's among the main reasons we look at the year's second half; we keep progressing toward that gross margin increase of 1 point per quarter. Malaysia ramp-up accounts for part of that, along with internal supply. Regarding our customers and what they request from us on internal supply, the answer would be yes. Additional supply is something our customers truly want us to bring on, since it gives them the flexibility they require. And that is precisely what our customers are requesting from us. Broadly speaking, I'd say product qualifications with our customers are moving faster than usual, which signals there are supply chain risks they must derisk, and with our internal supply, we're providing something like relief valves for that.

Brian Chin analyst
#18

Great. Thanks for that context. And turning to demand, it sounds like you're aiming for at least $350 million of revenue in Q4, plus at least 25% growth in either the second or first half; and with what you said about visibility extending further out, how would you gauge or characterize the growth momentum in the first half of next year compared with the second half?

Philip Barros executive
#19

Yes; there are a few things in the first half of 2027 that are interesting and will be additive, things we didn't see or won't see in this year's second half, especially litho, for instance; we expect that to accelerate meaningfully in the first half. I'd say it's a bit early to call next year's first half. Typically I wouldn't want to guide 6 months in advance. What I can say, though, is that our customers are issuing POs 6 months out, which, as you know, isn't normal for them. So at this point I feel quite good about how 2027 is shaping up. And I believe our customers are expressing that same degree of confidence. So I'll keep reinforcing that point too.

Linda Umwali analyst
#20

To start, I wanted to dig deeper into demand capacity. From what I gathered, you mentioned that manufacturing demand is no longer limited now that Malaysia is operational and more production is being handled internally. I'd like to get a sense of how much additional room exists to serve customers if demand remains robust. I'm not sure whether you covered this and I simply missed it — any detail on that would be helpful.

Philip Barros executive
#21

Sure. Just one clarification I'd like to make. Manufacturing capacity isn't a limiting factor for us at present. I want to be extremely clear on this point: our manufacturing capacity currently meets or exceeds what our customers require today. So yeah, I'm at ease with that. That being said, during the prepared remarks we mentioned how we're expanding — right now, with what we've already installed, we can handle $2 billion. And going into next year, we expect to push that up to roughly $3 billion. Again, that added capacity is about getting ready for growth, growth past what's required at present. And I'd put it this way: that $3 billion run rate is essentially greater than — actually more than twice — what we'll need this year. Basically, based on where we are this year, we can grow to more than twice that size.

Linda Umwali analyst
#22

Understood. Let me pivot now to the business outside of semi. Can you describe what's fueling that side of things at present? Is commercial space and defense still where most of the expansion comes from? And what's the right way to frame that business for the back half and looking out over the coming year?

Philip Barros executive
#23

Yeah. Honestly, I'd say our commercial space segment posted substantial growth during this quarter, and it keeps expanding as we move through the latter portion of this year. We obtained a formal qualification for one specific part family, and that will be ramping up during the back half of the year; so our confidence in that path is extremely high. Regrettably, we're also experiencing some expansion on the defense side, driven by particular activities behind it. That said, growth is showing up in commercial space as well as in aerospace and defense. Still, in my view, commercial space is setting the pace — or rather, it's what's propelling things by a wide margin.

Denis Pyatchanin analyst
#24

So, I believe there's just one thing I want to ask about today. Perhaps you could give us an update on the internal content road map. Could you share where things stand right now and where you anticipate being 12 months from now? And if that has shifted since the last time we talked, plus maybe what sort of gross margin gains might come out of that?

Philip Barros executive
#25

Yes. Great question once more. What I'd say is — we finished Q2 at roughly slightly under the 25% run rate we had coming out of last year; so as we reduce capacity from Minnesota and shift it to Mexico through our realignment, clearly, we deliberately cut some capacity. And we ramped that back up. It's now operational. So we stood at about 25% when the quarter ended. As we ramp Malaysia and more capacity in Mexico, we anticipate a run rate near 30% when this quarter ends and roughly 35% when the following quarter ends; that aligns very well with our expectations. I'd say that represents a major factor behind our gross margin improvements across the coming couple of quarters. And what excites me beyond simply the share of products we're placing there is the product margin we're observing on those. As we've transitioned these parts, we're witnessing substantial product margin gains. Though that was anticipated, I'm truly pleased with what we're seeing when it comes to capturing those gains.

Craig Ellis analyst
#26

I'll stay on the topic of gross margin. Phil, early in the year, you identified 4 things that might push gross margins up to 15%, and we're basically there now, plus you described 4 more that could bring the business to 20%. Could you discuss how confident you feel about moving from 15% gross margins to 20%, what visibility exists, and precisely what you're targeting as you execute toward that next 500 basis points of expansion?

Philip Barros executive
#27

Yes. My confidence right now, I'd call it greater than at any prior moment. Naturally, while you're putting these plans together, it's all just a plan on paper, yet watching it truly show up through execution is the moment you begin to understand it will happen. That's where I take comfort at this stage, since we're beginning to witness it in the real results, correct? Based on what you observed across the past couple of quarters, we beat our expectations for 100 basis points per quarter of execution. We did better than that; for me, that's simply proof of everything taking place and every change we're implementing, and those are becoming significant results; as you mentioned, we now sit at the 15%. So what have you done for me lately, and how will you reach 20%? Reaching 20% will require a lift; we discussed roughly 100 basis points across the next 2 quarters. Much of that will come from parts we've already qualified that still need ramping up. Much of that will come from Malaysia. And again, that will come from the margin — the gross margin gain we have on those specific products. One item I want to emphasize that perhaps I haven't stated publicly previously: we released a road map requiring flow control to reach 20%. I'd say I can currently see a path without it. There's more than a single path to bring us to the 20%; and I believe that as revenue keeps growing and our execution of the product strategy keeps going — keeps continuing, I'd say that is creating further paths for us to succeed.

Craig Ellis analyst
#28

That's quite useful. On this call, though, there hasn't been much discussion regarding how strong individual products are relative to one another, nor about your feelings on fulfillment product by product. Could you expand a bit on gas panels, chemical delivery, weldments, and so on, and share where you believe the business stands regarding satisfying customer demand and your capacity to meet increased customer calls as we move through this year and into the next one?

Philip Barros executive
#29

Yes. In my opinion, at least, we're doing very well for our customers. As you're aware, our customers are a demanding group. That said, I'd say we're delivering what they require. I believe that applies across the board, whether it's chem delivery, gas delivery, or our weldment business. Within our weldment business, we're witnessing substantial growth — that's a segment which had been somewhat depressed for some time; so we're beginning to see it come back up and rebound. That feels quite good. We've raised our capacity < > weldment < > the areas < > the first one was within our weldment business. So that's a single area where extra capacity will come online once we reach the second half, which I think, given the product mix.

Philip Barros executive
#30

Absolutely. Thanks, operator, and thanks to all of you for being with us on today's call. Once again, I'd like to express appreciation to our team members who are handling this ramp and strategic transformation all < >. I have full confidence in what the team can < > more proud to be < >. At the quarter, we have the ability to build momentum and energy. I'm eager for our next update on the Q3 call in November; until then, please contact Claire if you'd like to set up any follow-up meeting requests. Operator, the call can now be concluded.

Operator operator
#31

Everyone, we appreciate you taking part. That brings today's conference call to a close. Please go ahead and hang up your phones, and enjoy the rest of your day.

Read the full transcript via the API

You're viewing the first half of this call. Get the complete Ichor Holdings, Ltd. transcript - plus 131,000+ transcripts from 7,000+ companies, speaker segments and full-text search - through the EarningsAPI REST API or hosted MCP server.

Get an API key View API docs →

For developers and AI pipelines

Programmatic access to Ichor Holdings, Ltd. earnings transcripts and 131,000+ others is available through the EarningsAPI REST API and the hosted MCP server. Quarterly plans from $162 - full transcripts, speaker segments, full-text search, and the /api/v1/transcripts/recent polling endpoint for ETL pipelines.